summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* x86/mm: Avoid incomplete Global INVLPG flushesDave Hansen2023-05-302-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ce0b15d11ad837fbacc5356941712218e38a0a83 upstream. The INVLPG instruction is used to invalidate TLB entries for a specified virtual address. When PCIDs are enabled, INVLPG is supposed to invalidate TLB entries for the specified address for both the current PCID *and* Global entries. (Note: Only kernel mappings set Global=1.) Unfortunately, some INVLPG implementations can leave Global translations unflushed when PCIDs are enabled. As a workaround, never enable PCIDs on affected processors. I expect there to eventually be microcode mitigations to replace this software workaround. However, the exact version numbers where that will happen are not known today. Once the version numbers are set in stone, the processor list can be tweaked to only disable PCIDs on affected processors with affected microcode. Note: if anyone wants a quick fix that doesn't require patching, just stick 'nopcid' on your kernel command-line. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: fix register orderingFlorian Westphal2023-05-301-4/+11
| | | | | | | | | | | | | | | | | | | | [ d209df3e7f7002d9099fdb0f6df0f972b4386a63 ] [ We hit the trace described in commit message with the kselftest/nft_trans_stress.sh. This patch diverges from the upstream one since kernel 4.14 does not have following symbols: nft_chain_filter_init, nf_tables_flowtable_notifier ] We must register nfnetlink ops last, as that exposes nf_tables to userspace. Without this, we could theoretically get nfnetlink request before net->nft state has been initialized. Fixes: 99633ab29b213 ("netfilter: nf_tables: complete net namespace support") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> [apanyaki: backport to v4.14-stable] Signed-off-by: Andrew Paniakin <apanyaki@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: do not allow SET_ID to refer to another tablePablo Neira Ayuso2023-05-302-2/+7
| | | | | | | | | | | | | | | | | | | | | | [ 470ee20e069a6d05ae549f7d0ef2bdbcee6a81b2 ] When doing lookups for sets on the same batch by using its ID, a set from a different table can be used. Then, when the table is removed, a reference to the set may be kept after the set is freed, leading to a potential use-after-free. When looking for sets by ID, use the table that was used for the lookup by name, and only return sets belonging to that same table. This fixes CVE-2022-2586, also reported as ZDI-CAN-17470. Reported-by: Team Orca of Sea Security (@seasecresponse) Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: do not allow RULE_ID to refer to another chainPablo Neira Ayuso2023-05-301-1/+3
| | | | | | | | | | | | | | | | | | | | | [ 36d5b2913219ac853908b0f1c664345e04313856 ] When doing lookups for rules on the same batch by using its ID, a rule from a different chain can be used. If a rule is added to a chain but tries to be positioned next to a rule from a different chain, it will be linked to chain2, but the use counter on chain1 would be the one to be incremented. When looking for rules by ID, use the chain that was used for the lookup by name. The chain used in the context copied to the transaction needs to match that same chain. That way, struct nft_rule does not need to get enlarged with another member. Fixes: 1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute") Fixes: 75dd48e2e420 ("netfilter: nf_tables: Support RULE_ID reference in new rule") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nft_dynset: do not reject set updates with NFT_SET_EVALPablo Neira Ayuso2023-05-302-4/+2
| | | | | | | | | | | | | [ 215a31f19dedd4e92a67cf5a9717ee898d012b3a ] NFT_SET_EVAL is signalling the kernel that this sets can be updated from the evaluation path, even if there are no expressions attached to the element. Otherwise, set updates with no expressions fail. Update description to describe the right semantics. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: stricter validation of element dataPablo Neira Ayuso2023-05-301-1/+8
| | | | | | | | | | | | [ 7e6bc1f6cabcd30aba0b11219d8e01b952eacbb6 ] Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Reported-by: Hugues ANGUELKOV <hanguelkov@randorisec.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: allow up to 64 bytes in the set element data areaPablo Neira Ayuso2023-05-302-10/+29
| | | | | | | | | [ fdb9c405e35bdc6e305b9b4e20ebc141ed14fc81 ] So far, the set elements could store up to 128-bits in the data area. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: add nft_setelem_parse_key()Pablo Neira Ayuso2023-05-301-36/+42
| | | | | | | | | | | | | | | [ 20a1452c35425b2cef76f21f8395ef069dfddfa9 ] Add helper function to parse the set element key netlink attribute. v4: No changes v3: New patch [sbrivio: refactor error paths and labels; use NFT_DATA_VALUE_MAXLEN instead of sizeof(*key) in helper, value can be longer than that; rebase] Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: validate registers coming from userspace.Pablo Neira Ayuso2023-05-301-14/+17
| | | | | | | | | | [ 6e1acfa387b9ff82cfc7db8cc3b6959221a95851 ] Bail out in case userspace uses unsupported registers. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nftables: statify nft_parse_register()Pablo Neira Ayuso2023-05-302-3/+1
| | | | | | | | | [ 08a01c11a5bb3de9b0a9c9b2685867e50eda9910 ] This function is not used anymore by any extension, statify it. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nftables: add nft_parse_register_store() and use itPablo Neira Ayuso2023-05-3018-72/+85
| | | | | | | | | | | | | | | | | | | | | [ 345023b0db315648ccc3c1a36aee88304a8b4d91 ] This new function combines the netlink register attribute parser and the store validation function. This update requires to replace: enum nft_registers dreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘dreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nftables: add nft_parse_register_load() and use itPablo Neira Ayuso2023-05-3026-119/+124
| | | | | | | | | | | | | | | | | | | | | [ backport of 4f16d25c68ec844299a4df6ecbb0234eaf88a935 ] This new function combines the netlink register attribute parser and the load validation function. This update requires to replace: enum nft_registers sreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘sreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* parisc: Allow to reboot machine after system haltHelge Deller2023-05-301-3/+8
| | | | | | | | | | | commit 2028315cf59bb899a5ac7e87dc48ecb8fac7ac24 upstream. In case a machine can't power-off itself on system shutdown, allow the user to reboot it by pressing the RETURN key. Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* m68k: Move signal frame following exception on 68020/030Finn Thain2023-05-301-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b845b574f86dcb6a70dfa698aa87a237b0878d2a upstream. On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause a stack page fault during instruction execution (i.e. not at an instruction boundary) and produce a format 0xB exception frame. In this situation, the value of USP will be unreliable. If a signal is to be delivered following the exception, this USP value is used to calculate the location for a signal frame. This can result in a corrupted user stack. The corruption was detected in dash (actually in glibc) where it showed up as an intermittent "stack smashing detected" message and crash following signal delivery for SIGCHLD. It was hard to reproduce that failure because delivery of the signal raced with the page fault and because the kernel places an unpredictable gap of up to 7 bytes between the USP and the signal frame. A format 0xB exception frame can be produced by a bus error or an address error. The 68030 Users Manual says that address errors occur immediately upon detection during instruction prefetch. The instruction pipeline allows prefetch to overlap with other instructions, which means an address error can arise during the execution of a different instruction. So it seems likely that this patch may help in the address error case also. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/ Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: stable@vger.kernel.org Co-developed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: fsl-cpm: Use 16 bit mode for large transfers with even sizeChristophe Leroy2023-05-302-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | (cherry picked from upstream fc96ec826bced75cc6b9c07a4ac44bbf651337ab) On CPM, the RISC core is a lot more efficiant when doing transfers in 16-bits chunks than in 8-bits chunks, but unfortunately the words need to be byte swapped as seen in a previous commit. So, for large tranfers with an even size, allocate a temporary tx buffer and byte-swap data before and after transfer. This change allows setting higher speed for transfer. For instance on an MPC 8xx (CPM1 comms RISC processor), the documentation tells that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load at 25 MHz while a word transfer at the same speed uses 0.032% of CPM load. This means the speed can be 6 times higher in word mode for the same CPM load. For the time being, only do it on CPM1 as there must be a trade-off between the CPM load reduction and the CPU load required to byte swap the data. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/f2e981f20f92dd28983c3949702a09248c23845c.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: fsl-spi: Re-organise transfer bits_per_word adaptationChristophe Leroy2023-05-301-27/+23
| | | | | | | | | | | | | | | | | | | | | (backported from upstream 8a5299a1278eadf1e08a598a5345c376206f171e) For different reasons, fsl-spi driver performs bits_per_word modifications for different reasons: - On CPU mode, to minimise amount of interrupts - On CPM/QE mode to work around controller byte order For CPU mode that's done in fsl_spi_prepare_message() while for CPM mode that's done in fsl_spi_setup_transfer(). Reunify all of it in fsl_spi_prepare_message(), and catch impossible cases early through master's bits_per_word_mask instead of returning EINVAL later. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/0ce96fe96e8b07cba0613e4097cfd94d09b8919a.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: spi-fsl-spi: automatically adapt bits-per-word in cpu modeRasmus Villemoes2023-05-301-0/+16
| | | | | | | | | | | | | | | (cherry picked from upstream af0e6242909c3c4297392ca3e94eff1b4db71a97) Taking one interrupt for every byte is rather slow. Since the controller is perfectly capable of transmitting 32 bits at a time, change t->bits_per-word to 32 when the length is divisible by 4 and large enough that the reduced number of interrupts easily compensates for the one or two extra fsl_spi_setup_transfer() calls this causes. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nf_tables: bogus EBUSY in helper removal from transactionPablo Neira Ayuso2023-05-301-3/+16
| | | | | | | | | | | | commit 8ffcd32f64633926163cdd07a7d295c500a947d1 upstream. Proper use counter updates when activating and deactivating the object, otherwise, this hits bogus EBUSY error. Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase") Reported-by: Laura Garcia <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()Ryusuke Konishi2023-05-301-0/+18
| | | | | | | | | | | | | | | | | | | | | | | commit 9b5a04ac3ad9898c4745cba46ea26de74ba56a8e upstream. During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may cause use-after-free read if inodes are left in "garbage_list" and released by nilfs_dispose_list() at the end of nilfs_detach_log_writer(). Fix this issue by modifying nilfs_evict_inode() to only clear inode without additional metadata changes that use nilfs_root if the file system is degraded to read-only or the writer is detached. Link: https://lkml.kernel.org/r/20230509152956.8313-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+78d4495558999f55d1da@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000099e5ac05fb1c3b85@google.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ceph: force updating the msg pointer in non-split caseXiubo Li2023-05-301-0/+13
| | | | | | | | | | | | | | | | commit 4cafd0400bcb6187c0d4ab4d4b0229a89ac4f8c2 upstream. When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the request may still contain a list of 'split_realms', and we need to skip it anyway. Or it will be parsed as a corrupt snaptrace. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61200 Reported-by: Frank Schilder <frans@dtu.dk> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Add support for Advantech PCI-1611U cardVitaliy Tomin2023-05-301-0/+5
| | | | | | | | | | | | | | | | | | | commit d2b00516de0e1d696724247098f6733a6ea53908 upstream. Add support for Advantech PCI-1611U card Advantech provides opensource drivers for this and many others card based on legacy copy of 8250_pci driver called adv950 https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ It is hard to maintain to run as out of tree module on newer kernels. Just adding PCI ID to kernel 8250_pci works perfect. Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* statfs: enforce statfs[64] structure initializationIlya Leoshkevich2023-05-301-2/+2
| | | | | | | | | | | | | | | | | | | | commit ed40866ec7d328b3dfb70db7e2011640a16202c3 upstream. s390's struct statfs and struct statfs64 contain padding, which field-by-field copying does not set. Initialize the respective structs with zeros before filling them and copying them to userspace, like it's already done for the compat versions of these structs. Found by KMSAN. [agordeev@linux.ibm.com: fixed typo in patch description] Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/20230504144021.808932-2-iii@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch tableNikhil Mahale2023-05-301-0/+5
| | | | | | | | | | | | | | | | commit dc4f2ccaedddb489a83e7b12ebbdc347272aacc9 upstream. These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with audio functions that are largely similar to the existing ones. Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST connections on AD106 gpu. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda: Fix Oops by 9.1 surround channel namesTakashi Iwai2023-05-301-3/+4
| | | | | | | | | | | | | | | | | | | commit 3b44ec8c5c44790a82f07e90db45643c762878c6 upstream. get_line_out_pfx() may trigger an Oops by overflowing the static array with more than 8 channels. This was reported for MacBookPro 12,1 with Cirrus codec. As a workaround, extend for the 9.1 channels and also fix the potential Oops by unifying the code paths accessing the same array with the proper size check. Reported-by: Olliver Schinagl <oliver@schinagl.nl> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: fix deadlock when a scsi command timeouts more than onceMaxime Bizon2023-05-301-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a398d5eac6984316e71474e25b975688f282379b upstream. With faulty usb-storage devices, read/write can timeout, in that case the SCSI layer will abort and re-issue the command. USB storage has no internal timeout, it relies on SCSI layer aborting commands via .eh_abort_handler() for non those responsive devices. After two consecutive timeouts of the same command, SCSI layer calls .eh_device_reset_handler(), without calling .eh_abort_handler() first. With usb-storage, this causes a deadlock: -> .eh_device_reset_handler -> device_reset -> mutex_lock(&(us->dev_mutex)); mutex already by usb_stor_control_thread(), which is waiting for command completion: -> usb_stor_control_thread (mutex taken here) -> usb_stor_invoke_transport -> usb_stor_Bulk_transport -> usb_stor_bulk_srb -> usb_stor_bulk_transfer_sglist -> usb_sg_wait Make sure we cancel any pending command in .eh_device_reset_handler() to avoid this. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-usb@vger.kernel.org Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/ Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()Eric Dumazet2023-05-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit dacab578c7c6cd06c50c89dfa36b0e0f10decd4e ] syzbot triggered the following splat [1], sending an empty message through pppoe_sendmsg(). When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header() does not push extra bytes for the VLAN header, because vlan is offloaded. Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto before testing (vlan->flags & VLAN_FLAG_REORDER_HDR). We need to swap the two conditions. [1] BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 __netdev_start_xmit include/linux/netdevice.h:4883 [inline] netdev_start_xmit include/linux/netdevice.h:4897 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3053 [inline] pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774 slab_alloc_node mm/slub.c:3452 [inline] kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520 __alloc_skb+0x3a7/0x850 net/core/skbuff.c:606 alloc_skb include/linux/skbuff.h:1277 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583 pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* igb: fix bit_shift to be in [1..8] rangeAleksandr Loktionov2023-05-301-2/+2
| | | | | | | | | | | | | | | | | [ Upstream commit 60d758659f1fb49e0d5b6ac2691ede8c0958795b ] In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* cassini: Fix a memory leak in the error handling path of cas_init_one()Christophe JAILLET2023-05-301-0/+2
| | | | | | | | | | | | | | | | | [ Upstream commit 412cd77a2c24b191c65ea53025222418db09817c ] cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa40669cd7 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()Dong Chenchen2023-05-301-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c83b49383b595be50647f0c764a48c78b5f3c4f8 ] As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed854584 ("nsh: add GSO support") Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: netup_unidvb: fix use-after-free at del_timer()Duoming Zhou2023-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0f5bb36bf9b39a2a96e730bf4455095b50713f63 ] When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync(). Link: https://lore.kernel.org/linux-media/20230308125514.4208-1-duoming@zju.edu.cn Fixes: 52b1eaf4c59a ("[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* vsock: avoid to close connected socket after the timeoutZhuang Shengen2023-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6d4486efe9c69626cab423456169e250a5cd3af5 ] When client and server establish a connection through vsock, the client send a request to the server to initiate the connection, then start a timer to wait for the server's response. When the server's RESPONSE message arrives, the timer also times out and exits. The server's RESPONSE message is processed first, and the connection is established. However, the client's timer also times out, the original processing logic of the client is to directly set the state of this vsock to CLOSE and return ETIMEDOUT. It will not notify the server when the port is released, causing the server port remain. when client's vsock_connect timeout，it should check sk state is ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection is established, the client should not set the sk state to CLOSE Note: I encountered this issue on kernel-4.18, which can be fixed by this patch. Then I checked the latest code in the community and found similar issue. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Zhuang Shengen <zhuangshengen@huawei.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: fec: Better handle pm_runtime_get() failing in .remove()Uwe Kleine-König2023-05-301-3/+10
| | | | | | | | | | | | | | | | | | | [ Upstream commit f816b9829b19394d318e01953aa3b2721bca040d ] In the (unlikely) event that pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, the remove callback returned an error early. The problem with this is that the driver core ignores the error value and continues removing the device. This results in a resource leak. Worse the devm allocated resources are freed and so if a callback of the driver is called later the register mapping is already gone which probably results in a crash. Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* af_key: Reject optional tunnel/BEET mode templates in outbound policiesTobias Brunner2023-05-301-4/+8
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit cf3128a7aca55b2eefb68281d44749c683bdc96f ] xfrm_state_find() uses `encap_family` of the current template with the passed local and remote addresses to find a matching state. If an optional tunnel or BEET mode template is skipped in a mixed-family scenario, there could be a mismatch causing an out-of-bounds read as the addresses were not replaced to match the family of the next template. While there are theoretical use cases for optional templates in outbound policies, the only practical one is to skip IPComp states in inbound policies if uncompressed packets are received that are handled by an implicitly created IPIP state instead. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Tobias Brunner <tobias@strongswan.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* cpupower: Make TSC read per CPU for Mperf monitorWyes Karny2023-05-301-17/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c2adb1877b76fc81ae041e1db1a6ed2078c6746b ] System-wide TSC read could cause a drift in C0 percentage calculation. Because if first TSC is read and then one by one mperf is read for all cpus, this introduces drift between mperf reading of later CPUs and TSC reading. To lower this drift read TSC per CPU and also just after mperf read. This technique improves C0 percentage calculation in Mperf monitor. Before fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00 After fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00 0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 Cc: Thomas Renninger <trenn@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* mfd: dln2: Fix memory leak in dln2_probe()Qiang Ning2023-05-301-0/+1
| | | | | | | | | | | | | | | [ Upstream commit 96da8f148396329ba769246cb8ceaa35f1ddfc48 ] When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets to call usb_put_dev() to decrease the refcount of dln2->usb_dev. Fix this by adding usb_put_dev() in the error handling code of dln2_probe(). Signed-off-by: Qiang Ning <qning0106@126.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* phy: st: miphy28lp: use _poll_timeout functions for waitsAlain Volmat2023-05-301-32/+10
| | | | | | | | | | | | | [ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ] This commit introduces _poll_timeout functions usage instead of wait loops waiting for a status bit. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Input: xpad - add constants for GIP interface numbersVicki Pfau2023-05-301-1/+4
| | | | | | | | | | | | | [ Upstream commit f9b2e603c6216824e34dc9a67205d98ccc9a41ca ] Wired GIP devices present multiple interfaces with the same USB identification other than the interface number. This adds constants for differentiating two of them and uses them where appropriate Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230411031650.960322-2-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: tegra20: fix gcc-7 constant overflow warningArnd Bergmann2023-05-301-14/+14
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit b4a2adbf3586efa12fe78b9dec047423e01f3010 ] Older gcc versions get confused by comparing a u32 value to a negative constant in a switch()/case block: drivers/clk/tegra/clk-tegra20.c: In function 'tegra20_clk_measure_input_freq': drivers/clk/tegra/clk-tegra20.c:581:2: error: case label does not reduce to an integer constant case OSC_CTRL_OSC_FREQ_12MHZ: ^~~~ drivers/clk/tegra/clk-tegra20.c:593:2: error: case label does not reduce to an integer constant case OSC_CTRL_OSC_FREQ_26MHZ: Make the constants unsigned instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230227085914.2560984-1-arnd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* recordmcount: Fix memory leaks in the uwrite functionHao Zeng2023-05-301-1/+5
| | | | | | | | | | | | | [ Upstream commit fa359d068574d29e7d2f0fdd0ebe4c6a12b5cfb9 ] Common realloc mistake: 'file_append' nulled but not freed upon failure Link: https://lkml.kernel.org/r/20230426010527.703093-1-zenghao@kylinos.cn Signed-off-by: Hao Zeng <zenghao@kylinos.cn> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* sched: Fix KCSAN noinstr violationJosh Poimboeuf2023-05-301-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit e0b081d17a9f4e5c0cbb0e5fbeb1abe3de0f7e4e ] With KCSAN enabled, end_of_stack() can get out-of-lined. Force it inline. Fixes the following warnings: vmlinux.o: warning: objtool: check_stackleak_irqoff+0x2b: call to end_of_stack() leaves .noinstr.text section Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/cc1b4d73d3a428a00d206242a68fdf99a934ca7b.1681320026.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
* mcb-pci: Reallocate memory region to avoid memory overlappingRodríguez Barbarin, José Javier2023-05-301-2/+25
| | | | | | | | | | | | | | | | | | | [ Upstream commit 9be24faadd085c284890c3afcec7a0184642315a ] mcb-pci requests a fixed-size memory region to parse the chameleon table, however, if the chameleon table is smaller that the allocated region, it could overlap with the IP Cores' memory regions. After parsing the chameleon table, drop/reallocate the memory region with the actual chameleon table size. Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com> Signed-off-by: Johannes Thumshirn <jth@kernel.org> Link: https://lore.kernel.org/r/20230411083329.4506-3-jth@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* serial: 8250: Reinit port->pm on port specific driver unbindTony Lindgren2023-05-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* HID: wacom: generic: Set battery quirk only when we see battery dataJason Gerecke2023-05-301-22/+11
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit bea407a427baa019758f29f4d31b26f008bb8cc6 ] Some devices will include battery status usages in the HID descriptor but we won't see that battery data for one reason or another. For example, AES sensors won't send battery data unless an AES pen is in proximity. If a user does not have an AES pen but instead only interacts with the AES touchscreen with their fingers then there is no need for us to create a battery object. Similarly, if a family of peripherals shares the same HID descriptor between wired-only and wireless-capable SKUs, users of the former may never see a battery event and will not want a power_supply object created. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217062 Link: https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2354 Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3Kevin Groeneveld2023-05-301-6/+18
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 87c614175bbf28d3fd076dc2d166bac759e41427 ] When using gpio based chip select the cs value can go outside the range 0 – 3. The various MX51_ECSPI_* macros did not take this into consideration resulting in possible corruption of the configuration. For example for any cs value over 3 the SCLKPHA bits would not be set and other values in the register possibly corrupted. One way to fix this is to just mask the cs bits to 2 bits. This still allows all 4 native chip selects to work as well as gpio chip selects (which can use any of the 4 chip select configurations). Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Link: https://lore.kernel.org/r/20230318222132.3373-1-kgroeneveld@lenbrook.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* HID: logitech-hidpp: Reconcile USB and Unifying serialsBastien Nocera2023-05-301-4/+2
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 5b3691d15e04b6d5a32c915577b8dbc5cfb56382 ] Now that USB HID++ devices can gather a serial number that matches the one that would be gathered when connected through a Unifying receiver, remove the last difference by dropping the product ID as devices usually have different product IDs when connected through USB or Unifying. For example, on the serials on a G903 wired/wireless mouse: - Unifying before patch: 4067-e8-ce-cd-45 - USB before patch: c086-e8-ce-cd-45 - Unifying and USB after patch: e8-ce-cd-45 Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20230302130117.3975-2-hadess@hadess.net Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* HID: logitech-hidpp: Don't use the USB serial for USB devicesBastien Nocera2023-05-301-0/+51
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7ad1fe0da0fa91bf920b79ab05ae97bfabecc4f4 ] For devices that support the 0x0003 feature (Device Information) version 4, set the serial based on the output of that feature, rather than relying on the usbhid code setting the USB serial. This should allow the serial when connected through USB to (nearly) match the one when connected through a unifying receiver. For example, on the serials on a G903 wired/wireless mouse: - Unifying: 4067-e8-ce-cd-45 - USB before patch: 017C385C3837 - USB after patch: c086-e8-ce-cd-45 Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20230302130117.3975-1-hadess@hadess.net Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICEPhilipp Hortmann2023-05-302-8/+3
| | | | | | | | | | | | [ Upstream commit fda2093860df4812d69052a8cf4997e53853a340 ] Replace macro RTL_PCI_DEVICE with PCI_DEVICE to get rid of rtl819xp_ops which is empty. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/8b45ee783fa91196b7c9d6fc840a189496afd2f4.1677133271.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rspMin Li2023-05-301-1/+0
| | | | | | | | | | | | | | [ Upstream commit 25e97f7b1866e6b8503be349eeea44bb52d661ce ] conn->chan_lock isn't acquired before l2cap_get_chan_by_scid, if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance' is triggered. Reported-by: syzbot+9519d6b5b79cf7787cf3@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000894f5f05f95e9f4d@google.com/ Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtraceHans de Goede2023-05-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ef16799640865f937719f0771c93be5dca18adc6 ] A received TKIP key may be up to 32 bytes because it may contain MIC rx/tx keys too. These are not used by iwl and copying these over overflows the iwl_keyinfo.key field. Add a check to not copy more data to iwl_keyinfo.key then will fit. This fixes backtraces like this one: memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16) WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017 RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Call Trace: <TASK> iwl_set_dynamic_key+0x1f0/0x220 [iwldvm] iwlagn_mac_set_key+0x1e4/0x280 [iwldvm] drv_set_key+0xa4/0x1b0 [mac80211] ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211] ieee80211_key_replace+0x22d/0x8e0 [mac80211] <snip> Link: https://www.alionet.org/index.php?topic=1469.0 Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/ Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/ Cc: Kees Cook <keescook@chromium.org> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()Ojaswin Mujoo2023-05-301-18/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 93cdf49f6eca5e23f6546b8f28457b2e6a6961d9 ] When the length of best extent found is less than the length of goal extent we need to make sure that the best extent atleast covers the start of the original request. This is done by adjusting the ac_b_ex.fe_logical (logical start) of the extent. While doing so, the current logic sometimes results in the best extent's logical range overflowing the goal extent. Since this best extent is later added to the inode preallocation list, we have a possibility of introducing overlapping preallocations. This is discussed in detail here [1]. As per Jan's suggestion, to fix this, replace the existing logic with the below logic for adjusting best extent as it keeps fragmentation in check while ensuring logical range of best extent doesn't overflow out of goal extent: 1. Check if best extent can be kept at end of goal range and still cover original start. 2. Else, check if best extent can be kept at start of goal range and still cover original start. 3. Else, keep the best extent at start of original request. Also, add a few extra BUG_ONs that might help catch errors faster. [1] https://lore.kernel.org/r/Y+OGkVvzPN0RMv0O@li-bb2b2a4c-3307-11b2-a85c-8fa5c3a69313.ibm.com Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/f96aca6d415b36d1f90db86c1a8cd7e2e9d7ab0e.1679731817.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-21 23:45:52 +0000