summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/book3s/64: check for NULL pointer in pgd_alloc()Rick Lindsley2019-05-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f39356261c265a0689d7ee568132d516e8b6cecc upstream. When the memset code was added to pgd_alloc(), it failed to consider that kmem_cache_alloc() can return NULL. It's uncommon, but not impossible under heavy memory contention. Example oops: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000000a4000 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries CPU: 70 PID: 48471 Comm: entrypoint.sh Kdump: loaded Not tainted 4.14.0-115.6.1.el7a.ppc64le #1 task: c000000334a00000 task.stack: c000000331c00000 NIP: c0000000000a4000 LR: c00000000012f43c CTR: 0000000000000020 REGS: c000000331c039c0 TRAP: 0300 Not tainted (4.14.0-115.6.1.el7a.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44022840 XER: 20040000 CFAR: c000000000008874 DAR: 0000000000000000 DSISR: 42000000 SOFTE: 1 ... NIP [c0000000000a4000] memset+0x68/0x104 LR [c00000000012f43c] mm_init+0x27c/0x2f0 Call Trace: mm_init+0x260/0x2f0 (unreliable) copy_mm+0x11c/0x638 copy_process.isra.28.part.29+0x6fc/0x1080 _do_fork+0xdc/0x4c0 ppc_clone+0x8/0xc Instruction dump: 409e000c b0860000 38c60002 409d000c 90860000 38c60004 78a0d183 78a506a0 7c0903a6 41820034 60000000 60420000 <f8860000> f8860008 f8860010 f8860018 Fixes: fc5c2f4a55a2 ("powerpc/mm/hash64: Zero PGD pages on allocation") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Rick Lindsley <ricklind@vnet.linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctlDan Carpenter2019-05-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 6a024330650e24556b8a18cc654ad00cfecf6c6c upstream. The "param.count" value is a u64 thatcomes from the user. The code later in the function assumes that param.count is at least one and if it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR. Also the addition can have an integer overflow which would lead us to allocate a smaller "pages" array than required. I can't immediately tell what the possible run times implications are, but it's safest to prevent the overflow. Link: http://lkml.kernel.org/r/20181218082129.GE32567@kadam Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Timur Tabi <timur@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctlDan Carpenter2019-05-161-13/+13
| | | | | | | | | | | | | | | | | | | | commit c8ea3663f7a8e6996d44500ee818c9330ac4fd88 upstream. strndup_user() returns error pointers on error, and then in the error handling we pass the error pointers to kfree(). It will cause an Oops. Link: http://lkml.kernel.org/r/20181218082003.GD32567@kadam Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Timur Tabi <timur@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tipc: fix hanging clients using poll with EPOLLOUT flagParthasarathy Bhuvaragan2019-05-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ff946833b70e0c7f93de9a3f5b329b5ae2287b38 ] commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state. In this commit, we: - improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients. - revert the faulty updates introduced by commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets"). Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.se> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* isdn: bas_gigaset: use usb_fill_int_urb() properlyPaul Bolle2019-05-161-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4014dfae3ccaaf3ec19c9ae0691a3f14e7132eae ] The switch to make bas_gigaset use usb_fill_int_urb() - instead of filling that urb "by hand" - missed the subtle ordering of the previous code. See, before the switch urb->dev was set to a member somewhere deep in a complicated structure and then supplied to usb_rcvisocpipe() and usb_sndisocpipe(). After that switch urb->dev wasn't set to anything specific before being supplied to those two macros. This triggers a nasty oops: BUG: unable to handle kernel NULL pointer dereference at 00000000 #PF error: [normal kernel read fault] *pde = 00000000 Oops: 0000 [#1] SMP CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc4.1.local0.fc28.i686 #1 Hardware name: IBM 2525FAG/2525FAG, BIOS 74ET64WW (2.09 ) 12/14/2006 EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset] Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: f30c9f20 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086 CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0 Call Trace: <SOFTIRQ> ? gigaset_isdn_connD+0xf6/0x140 [gigaset] gigaset_handle_event+0x173e/0x1b90 [gigaset] tasklet_action_common.isra.16+0x4e/0xf0 tasklet_action+0x1e/0x20 __do_softirq+0xb2/0x293 ? __irqentry_text_end+0x3/0x3 call_on_stack+0x45/0x50 </SOFTIRQ> ? irq_exit+0xb5/0xc0 ? do_IRQ+0x78/0xd0 ? acpi_idle_enter_s2idle+0x50/0x50 ? common_interrupt+0xd4/0xdc ? acpi_idle_enter_s2idle+0x50/0x50 ? sched_cpu_activate+0x1b/0xf0 ? acpi_fan_resume.cold.7+0x9/0x18 ? cpuidle_enter_state+0x152/0x4c0 ? cpuidle_enter+0x14/0x20 ? call_cpuidle+0x21/0x40 ? do_idle+0x1c8/0x200 ? cpu_startup_entry+0x25/0x30 ? rest_init+0x88/0x8a ? arch_call_rest_init+0xd/0x19 ? start_kernel+0x42f/0x448 ? i386_start_kernel+0xac/0xb0 ? startup_32_smp+0x164/0x168 Modules linked in: ppp_generic slhc capi bas_gigaset gigaset kernelcapi nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc ipw2200 iTCO_wdt gpio_ich snd_intel8x0 libipw iTCO_vendor_support snd_ac97_codec lib80211 ppdev ac97_bus snd_seq cfg80211 snd_seq_device pcspkr thinkpad_acpi lpc_ich snd_pcm i2c_i801 snd_timer ledtrig_audio snd soundcore rfkill parport_pc parport pcc_cpufreq acpi_cpufreq i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sdhci_pci sysimgblt cqhci fb_sys_fops drm sdhci mmc_core tg3 ata_generic serio_raw yenta_socket pata_acpi video CR2: 0000000000000000 ---[ end trace 1fe07487b9200c73 ]--- EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset] Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: cddcb3bc DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086 CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0xcc00000 from 0xc0400000 (relocation range: 0xc0000000-0xf6ffdfff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- No-one noticed because this Oops is apparently only triggered by setting up an ISDN data connection on a live ISDN line on a gigaset base (ie, the PBX that the gigaset driver support). Very few people do that running present day kernels. Anyhow, a little code reorganization makes this problem go away, while avoiding the subtle ordering that was used in the past. So let's do that. Fixes: 78c696c19578 ("isdn: gigaset: use usb_fill_int_urb()") Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tuntap: synchronize through tfiles array instead of tun->numqueuesJason Wang2019-05-161-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 9871a9e47a2646fe30ae7fd2e67668a8d30912f6 ] When a queue(tfile) is detached through __tun_detach(), we move the last enabled tfile to the position where detached one sit but don't NULL out last position. We expect to synchronize the datapath through tun->numqueues. Unfortunately, this won't work since we're lacking sufficient mechanism to order or synchronize the access to tun->numqueues. To fix this, NULL out the last position during detaching and check RCU protected tfile against NULL instead of checking tun->numqueues in datapath. Cc: YueHaibing <yuehaibing@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: weiyongjun (A) <weiyongjun1@huawei.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: c8d68e6be1c3b ("tuntap: multiqueue support") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tuntap: fix dividing by zero in ebpf queue selectionJason Wang2019-05-161-1/+6
| | | | | | | | | | | | | | [ Upstream commit a35d310f03a692bf4798eb309a1950a06a150620 ] We need check if tun->numqueues is zero (e.g for the persist device) before trying to use it for modular arithmetic. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 96f84061620c6("tun: add eBPF based queue selection method") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vrf: sit mtu should not be updated when vrf netdev is the linkStephen Suryaputra2019-05-161-1/+1
| | | | | | | | | | | | | | | [ Upstream commit ff6ab32bd4e073976e4d8797b4d514a172cfe6cb ] VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vlan: disable SIOCSHWTSTAMP in containerHangbin Liu2019-05-161-1/+3
| | | | | | | | | | | | | | | [ Upstream commit 873017af778439f2f8e3d87f28ddb1fcaf244a76 ] With NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on vlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* selinux: do not report error on connect(AF_UNSPEC)Paolo Abeni2019-05-161-4/+4
| | | | | | | | | | | | | | | | | | | | [ Upstream commit c7e0d6cca86581092cbbf2cd868b3601495554cf ] calling connect(AF_UNSPEC) on an already connected TCP socket is an established way to disconnect() such socket. After commit 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure") it no longer works and, in the above scenario connect() fails with EAFNOSUPPORT. Fix the above falling back to the generic/old code when the address family is not AF_INET{4,6}, but leave the SCTP code path untouched, as it has specific constraints. Fixes: 68741a8adab9 ("selinux: Fix ltp test connect-syscall failure") Reported-by: Tom Deseyn <tdeseyn@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* packet: Fix error path in packet_initYueHaibing2019-05-161-5/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 36096f2f4fa05f7678bc87397665491700bae757 ] kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: ucc_geth - fix Oops when changing number of buffers in the ringChristophe Leroy2019-05-161-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ee0df19305d9fabd9479b785918966f6e25b733b ] When changing the number of buffers in the RX ring while the interface is running, the following Oops is encountered due to the new number of buffers being taken into account immediately while their allocation is done when opening the device only. [ 69.882706] Unable to handle kernel paging request for data at address 0xf0000100 [ 69.890172] Faulting instruction address: 0xc033e164 [ 69.895122] Oops: Kernel access of bad area, sig: 11 [#1] [ 69.900494] BE PREEMPT CMPCPRO [ 69.907120] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.115-00006-g179ade8ce3-dirty #269 [ 69.915956] task: c0684310 task.stack: c06da000 [ 69.920470] NIP: c033e164 LR: c02e44d0 CTR: c02e41fc [ 69.925504] REGS: dfff1e20 TRAP: 0300 Not tainted (4.14.115-00006-g179ade8ce3-dirty) [ 69.934161] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 22004428 XER: 20000000 [ 69.940869] DAR: f0000100 DSISR: 20000000 [ 69.940869] GPR00: c0352d70 dfff1ed0 c0684310 f00000a4 00000040 dfff1f68 00000000 0000001f [ 69.940869] GPR08: df53f410 1cc00040 00000021 c0781640 42004424 100c82b6 f00000a4 df53f5b0 [ 69.940869] GPR16: df53f6c0 c05daf84 00000040 00000000 00000040 c0782be4 00000000 00000001 [ 69.940869] GPR24: 00000000 df53f400 000001b0 df53f410 df53f000 0000003f df708220 1cc00044 [ 69.978348] NIP [c033e164] skb_put+0x0/0x5c [ 69.982528] LR [c02e44d0] ucc_geth_poll+0x2d4/0x3f8 [ 69.987384] Call Trace: [ 69.989830] [dfff1ed0] [c02e4554] ucc_geth_poll+0x358/0x3f8 (unreliable) [ 69.996522] [dfff1f20] [c0352d70] net_rx_action+0x248/0x30c [ 70.002099] [dfff1f80] [c04e93e4] __do_softirq+0xfc/0x310 [ 70.007492] [dfff1fe0] [c0021124] irq_exit+0xd0/0xd4 [ 70.012458] [dfff1ff0] [c000e7e0] call_do_irq+0x24/0x3c [ 70.017683] [c06dbe80] [c0006bac] do_IRQ+0x64/0xc4 [ 70.022474] [c06dbea0] [c001097c] ret_from_except+0x0/0x14 [ 70.027964] --- interrupt: 501 at rcu_idle_exit+0x84/0x90 [ 70.027964] LR = rcu_idle_exit+0x74/0x90 [ 70.037585] [c06dbf60] [20000000] 0x20000000 (unreliable) [ 70.042984] [c06dbf80] [c004bb0c] do_idle+0xb4/0x11c [ 70.047945] [c06dbfa0] [c004bd14] cpu_startup_entry+0x18/0x1c [ 70.053682] [c06dbfb0] [c05fb034] start_kernel+0x370/0x384 [ 70.059153] [c06dbff0] [00003438] 0x3438 [ 70.063062] Instruction dump: [ 70.066023] 38a00000 38800000 90010014 4bfff015 80010014 7c0803a6 3123ffff 7c691910 [ 70.073767] 38210010 4e800020 38600000 4e800020 <80e3005c> 80c30098 3107ffff 7d083910 [ 70.081690] ---[ end trace be7ccd9c1e1a9f12 ]--- This patch forbids the modification of the number of buffers in the ring while the interface is running. Fixes: ac421852b3a0 ("ucc_geth: add ethtool support") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: seeq: fix crash caused by not set dev.parentThomas Bogendoerfer2019-05-161-0/+1
| | | | | | | | | | | | [ Upstream commit 5afcd14cfc7fed1bcc8abcee2cef82732772bfc2 ] The old MIPS implementation of dma_cache_sync() didn't use the dev argument, but commit c9eb6172c328 ("dma-mapping: turn dma_cache_sync into a dma_map_ops method") changed that, so we now need to set dev.parent. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: macb: Change interrupt and napi enable order in openHarini Katakam2019-05-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0504453139ef5a593c9587e1e851febee859c7d8 ] Current order in open: -> Enable interrupts (macb_init_hw) -> Enable NAPI -> Start PHY Sequence of RX handling: -> RX interrupt occurs -> Interrupt is cleared and interrupt bits disabled in handler -> NAPI is scheduled -> In NAPI, RX budget is processed and RX interrupts are re-enabled With the above, on QEMU or fixed link setups (where PHY state doesn't matter), there's a chance macb RX interrupt occurs before NAPI is enabled. This will result in NAPI being scheduled before it is enabled. Fix this macb open by changing the order. Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filteringCorentin Labbe2019-05-161-0/+2
| | | | | | | | | | | | | | | [ Upstream commit d4c26eb6e721683a0f93e346ce55bc8dc3cbb175 ] When adding more MAC addresses to a dwmac-sun8i interface, the device goes directly in promiscuous mode. This is due to IFF_UNICAST_FLT missing flag. So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: Fix error cleanup path in dsa_init_moduleYueHaibing2019-05-161-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 68be930249d051fd54d3d99156b3dcadcb2a1f9b ] BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: Fix raw socket lookup for local trafficDavid Ahern2019-05-161-2/+2
| | | | | | | | | | | | | | | | | | [ Upstream commit 19e4e768064a87b073a4b4c138b55db70e0cfb9f ] inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic. As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO. IPv6 works fine. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL ↵Hangbin Liu2019-05-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | not supplied [ Upstream commit e9919a24d3022f72bcadc407e73a6ef17093a849 ] With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") we now able to check if a rule already exists. But this only works with iproute2. For other tools like libnl, NetworkManager, it still could add duplicate rules with only NLM_F_CREATE flag, like [localhost ~ ]# ip rule 0: from all lookup local 32766: from all lookup main 32767: from all lookup default 100000: from 192.168.7.5 lookup 5 100000: from 192.168.7.5 lookup 5 As it doesn't make sense to create two duplicate rules, let's just return 0 if the rule exists. Fixes: 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") Reported-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dpaa_eth: fix SG frame cleanupLaurentiu Tudor2019-05-161-1/+1
| | | | | | | | | | | | | [ Upstream commit 17170e6570c082717c142733d9a638bcd20551f8 ] Fix issue with the entry indexing in the sg frame cleanup code being off-by-1. This problem showed up when doing some basic iperf tests and manifested in traffic coming to a halt. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bridge: Fix error path for kobject_init_and_add()Tobin C. Harding2019-05-161-7/+6
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit bdfad5aec1392b93495b77b864d58d7f101dc1c1 ] Currently error return from kobject_init_and_add() is not followed by a call to kobject_put(). This means there is a memory leak. We currently set p to NULL so that kfree() may be called on it as a noop, the code is arguably clearer if we move the kfree() up closer to where it is called (instead of after goto jump). Remove a goto label 'err1' and jump to call to kobject_put() in error return from kobject_init_and_add() fixing the memory leak. Re-name goto label 'put_back' to 'err1' now that we don't use err1, following current nomenclature (err1, err2 ...). Move call to kfree out of the error code at bottom of function up to closer to where memory was allocated. Add comment to clarify call to kfree(). Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bonding: fix arp_validate toggling in active-backup modeJarod Wilson2019-05-161-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ] There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so: modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down echo "ens4f0" > /sys/class/net/bond0/bonding/slaves echo "ens4f1" > /sys/class/net/bond0/bonding/slaves ip link set bond0 up ip addr add 192.168.1.2/24 dev bond0 Pings to 192.168.1.1 work just fine. Now turn on arp_validate: echo 1 > /sys/class/net/bond0/bonding/arp_validate Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face: echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg ... [133191.911987] bond0: Setting arp_validate to none (0) [133194.257793] bond0: bond_should_notify_peers: slave ens4f0 [133194.258031] bond0: link status definitely down for interface ens4f0, disabling it [133194.259000] bond0: making interface ens4f1 the new active one [133197.330130] bond0: link status definitely down for interface ens4f1, disabling it [133197.331191] bond0: now running without any active interface! The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df97c7f, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well. One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here. Fixes: 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/64s: Include cpu headerBreno Leitao2019-05-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 42e2acde1237878462b028f5a27d9cc5bea7502c upstream. Current powerpc security.c file is defining functions, as cpu_show_meltdown(), cpu_show_spectre_v{1,2} and others, that are being declared at linux/cpu.h header without including the header file that contains these declarations. This is being reported by sparse, which thinks that these functions are static, due to the lack of declaration: arch/powerpc/kernel/security.c:105:9: warning: symbol 'cpu_show_meltdown' was not declared. Should it be static? arch/powerpc/kernel/security.c:139:9: warning: symbol 'cpu_show_spectre_v1' was not declared. Should it be static? arch/powerpc/kernel/security.c:161:9: warning: symbol 'cpu_show_spectre_v2' was not declared. Should it be static? arch/powerpc/kernel/security.c:209:6: warning: symbol 'stf_barrier' was not declared. Should it be static? arch/powerpc/kernel/security.c:289:9: warning: symbol 'cpu_show_spec_store_bypass' was not declared. Should it be static? This patch simply includes the proper header (linux/cpu.h) to match function definition and declaration. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Major Hayden <major@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* um: Don't hardcode path as it is architecture dependentRitesh Raj Sarraf2019-05-161-1/+1
| | | | | | | | | | | | commit 9ca19a3a3e2482916c475b90f3d7fa2a03d8e5ed upstream. The current code fails to run on amd64 because of hardcoded reference to i386 Signed-off-by: Ritesh Raj Sarraf <rrs@researchut.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Don't jump to compute_result state from check_result stateNigel Croxon2019-05-161-15/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef upstream. Changing state from check_state_check_result to check_state_compute_result not only is unsafe but also doesn't appear to serve a valid purpose. A raid6 check should only be pushing out extra writes if doing repair and a mis-match occurs. The stripe dev management will already try and do repair writes for failing sectors. This patch makes the raid6 check_state_check_result handling work more like raid5's. If somehow too many failures for a check, just quit the check operation for the stripe. When any checks pass, don't try and use check_state_compute_result for a purpose it isn't needed for and is unsafe for. Just mark the stripe as in sync for passing its parity checks and let the stripe dev read/write code and the bad blocks list do their job handling I/O errors. Repro steps from Xiao: These are the steps to reproduce this problem: 1. redefined OPT_MEDIUM_ERR_ADDR to 12000 in scsi_debug.c 2. insmod scsi_debug.ko dev_size_mb=11000 max_luns=1 num_tgts=1 3. mdadm --create /dev/md127 --level=6 --raid-devices=5 /dev/sde1 /dev/sde2 /dev/sde3 /dev/sde5 /dev/sde6 sde is the disk created by scsi_debug 4. echo "2" >/sys/module/scsi_debug/parameters/opts 5. raid-check It panic: [ 4854.730899] md: data-check of RAID array md127 [ 4854.857455] sd 5:0:0:0: [sdr] tag#80 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.859246] sd 5:0:0:0: [sdr] tag#80 Sense Key : Medium Error [current] [ 4854.860694] sd 5:0:0:0: [sdr] tag#80 Add. Sense: Unrecovered read error [ 4854.862207] sd 5:0:0:0: [sdr] tag#80 CDB: Read(10) 28 00 00 00 2d 88 00 04 00 00 [ 4854.864196] print_req_error: critical medium error, dev sdr, sector 11656 flags 0 [ 4854.867409] sd 5:0:0:0: [sdr] tag#100 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.869469] sd 5:0:0:0: [sdr] tag#100 Sense Key : Medium Error [current] [ 4854.871206] sd 5:0:0:0: [sdr] tag#100 Add. Sense: Unrecovered read error [ 4854.872858] sd 5:0:0:0: [sdr] tag#100 CDB: Read(10) 28 00 00 00 2e e0 00 00 08 00 [ 4854.874587] print_req_error: critical medium error, dev sdr, sector 12000 flags 4000 [ 4854.876456] sd 5:0:0:0: [sdr] tag#101 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.878552] sd 5:0:0:0: [sdr] tag#101 Sense Key : Medium Error [current] [ 4854.880278] sd 5:0:0:0: [sdr] tag#101 Add. Sense: Unrecovered read error [ 4854.881846] sd 5:0:0:0: [sdr] tag#101 CDB: Read(10) 28 00 00 00 2e e8 00 00 08 00 [ 4854.883691] print_req_error: critical medium error, dev sdr, sector 12008 flags 4000 [ 4854.893927] sd 5:0:0:0: [sdr] tag#166 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4854.896002] sd 5:0:0:0: [sdr] tag#166 Sense Key : Medium Error [current] [ 4854.897561] sd 5:0:0:0: [sdr] tag#166 Add. Sense: Unrecovered read error [ 4854.899110] sd 5:0:0:0: [sdr] tag#166 CDB: Read(10) 28 00 00 00 2e e0 00 00 10 00 [ 4854.900989] print_req_error: critical medium error, dev sdr, sector 12000 flags 0 [ 4854.902757] md/raid:md127: read error NOT corrected!! (sector 9952 on sdr1). [ 4854.904375] md/raid:md127: read error NOT corrected!! (sector 9960 on sdr1). [ 4854.906201] ------------[ cut here ]------------ [ 4854.907341] kernel BUG at drivers/md/raid5.c:4190! raid5.c:4190 above is this BUG_ON: handle_parity_checks6() ... BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */ Cc: <stable@vger.kernel.org> # v3.16+ OriginalAuthor: David Jeffery <djeffery@redhat.com> Cc: Xiao Ni <xni@redhat.com> Tested-by: David Jeffery <djeffery@redhat.com> Signed-off-by: David Jeffy <djeffery@redhat.com> Signed-off-by: Nigel Croxon <ncroxon@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl8723ae: Fix missing break in switch statementGustavo A. R. Silva2019-05-161-0/+1
| | | | | | | | | | | | | | | | | | | commit 84242b82d81c54e009a2aaa74d3d9eff70babf56 upstream. Add missing break statement in order to prevent the code from falling through to case 0x1025, and erroneously setting rtlhal->oem_id to RT_CID_819X_ACER when rtlefuse->eeprom_svid is equal to 0x10EC and none of the cases in switch (rtlefuse->eeprom_smid) match. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 238ad2ddf34b ("rtlwifi: rtl8723ae: Clean up the hardware info routine") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwl8k: Fix rate_idx underflowPetr Štetiar2019-05-161-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6b583201fa219b7b1b6aebd8966c8fd9357ef9f4 upstream. It was reported on OpenWrt bug tracking system[1], that several users are affected by the endless reboot of their routers if they configure 5GHz interface with channel 44 or 48. The reboot loop is caused by the following excessive number of WARN_ON messages: WARNING: CPU: 0 PID: 0 at backports-4.19.23-1/net/mac80211/rx.c:4516 ieee80211_rx_napi+0x1fc/0xa54 [mac80211] as the messages are being correctly emitted by the following guard: case RX_ENC_LEGACY: if (WARN_ON(status->rate_idx >= sband->n_bitrates)) as the rate_idx is in this case erroneously set to 251 (0xfb). This fix simply converts previously used magic number to proper constant and guards against substraction which is leading to the currently observed underflow. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2218 Fixes: 854783444bab ("mwl8k: properly set receive status rate index on 5 GHz receive") Cc: <stable@vger.kernel.org> Tested-by: Eubert Bao <bunnier@gmail.com> Reported-by: Eubert Bao <bunnier@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cw1200: fix missing unlock on error in cw1200_hw_scan()Wei Yongjun2019-05-161-1/+4
| | | | | | | | | | | | | | commit 51c8d24101c79ffce3e79137e2cee5dfeb956dd7 upstream. Add the missing unlock before return from function cw1200_hw_scan() in the error handling case. Fixes: 4f68ef64cd7f ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/kprobes: Avoid kretprobe recursion bugMasami Hiramatsu2019-05-161-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b191fa96ea6dc00d331dcc28c1f7db5e075693a0 ] Avoid kretprobe recursion loop bg by setting a dummy kprobes to current_kprobe per-CPU variable. This bug has been introduced with the asm-coded trampoline code, since previously it used another kprobe for hooking the function return placeholder (which only has a nop) and trampoline handler was called from that kprobe. This revives the old lost kprobe again. With this fix, we don't see deadlock anymore. And you can see that all inner-called kretprobe are skipped. event_1 235 0 event_2 19375 19612 The 1st column is recorded count and the 2nd is missed count. Above shows (event_1 rec) + (event_2 rec) ~= (event_2 missed) (some difference are here because the counter is racy) Reported-by: Andrea Righi <righi.andrea@gmail.com> Tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: c9becf58d935 ("[PATCH] kretprobe: kretprobe-booster") Link: http://lkml.kernel.org/r/155094064889.6137.972160690963039.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* nfc: nci: Potential off by one in ->pipes[] arrayDan Carpenter2019-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 6491d698396fd5da4941980a35ca7c162a672016 ] This is similar to commit e285d5bfb7e9 ("NFC: Fix the number of pipes") where we changed NFC_HCI_MAX_PIPES from 127 to 128. As the comment next to the define explains, the pipe identifier is 7 bits long. The highest possible pipe is 127, but the number of possible pipes is 128. As the code is now, then there is potential for an out of bounds array access: net/nfc/nci/hci.c:297 nci_hci_cmd_received() warn: array off by one? 'ndev->hci_dev->pipes[pipe]' '0-127 == 127' Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* NFC: nci: Add some bounds checking in nci_hci_cmd_received()Dan Carpenter2019-05-161-0/+8
| | | | | | | | | | | | | | | | | | | | [ Upstream commit d7ee81ad09f072eab1681877fc71ec05f9c1ae92 ] This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory corruption when handling SHDLC I-Frame commands"). I'm not totally sure, but I think that commit description may have overstated the danger. I was under the impression that this data came from the firmware? If you can't trust your networking firmware, then you're already in trouble. Anyway, these days we add bounds checking where ever we can and we call it kernel hardening. Better safe than sorry. Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* net: strparser: partially revert "strparser: Call skb_unclone conditionally"Jakub Kicinski2019-05-161-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4a9c2e3746e6151fd5d077259d79ce9ca86d47d7 ] This reverts the first part of commit 4e485d06bb8c ("strparser: Call skb_unclone conditionally"). To build a message with multiple fragments we need our own root of frag_list. We can't simply use the frag_list of orig_skb, because it will lead to linking all orig_skbs together creating very long frag chains, and causing stack overflow on kfree_skb() (which is called recursively on the frag_lists). BUG: stack guard page was hit at 00000000d40fad41 (stack is 0000000029dde9f4..000000008cce03d5) kernel stack overflow (double-fault): 0000 [#1] PREEMPT SMP RIP: 0010:free_one_page+0x2b/0x490 Call Trace: __free_pages_ok+0x143/0x2c0 skb_release_data+0x8e/0x140 ? skb_release_data+0xad/0x140 kfree_skb+0x32/0xb0 [...] skb_release_data+0xad/0x140 ? skb_release_data+0xad/0x140 kfree_skb+0x32/0xb0 skb_release_data+0xad/0x140 ? skb_release_data+0xad/0x140 kfree_skb+0x32/0xb0 skb_release_data+0xad/0x140 ? skb_release_data+0xad/0x140 kfree_skb+0x32/0xb0 skb_release_data+0xad/0x140 ? skb_release_data+0xad/0x140 kfree_skb+0x32/0xb0 skb_release_data+0xad/0x140 __kfree_skb+0xe/0x20 tcp_disconnect+0xd6/0x4d0 tcp_close+0xf4/0x430 ? tcp_check_oom+0xf0/0xf0 tls_sk_proto_close+0xe4/0x1e0 [tls] inet_release+0x36/0x60 __sock_release+0x37/0xa0 sock_close+0x11/0x20 __fput+0xa2/0x1d0 task_work_run+0x89/0xb0 exit_to_usermode_loop+0x9a/0xa0 do_syscall_64+0xc0/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Let's leave the second unclone conditional, as I'm not entirely sure what is its purpose :) Fixes: 4e485d06bb8c ("strparser: Call skb_unclone conditionally") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* net/tls: fix the IV leaksJakub Kicinski2019-05-161-1/+4
| | | | | | | | | | | | | | | | | [ Upstream commit 5a03bc73abed6ae196c15e9950afde19d48be12c ] Commit f66de3ee2c16 ("net/tls: Split conf to rx + tx") made freeing of IV and record sequence number conditional to SW path only, but commit e8f69799810c ("net/tls: Add generic NIC offload infrastructure") also allocates that state for the device offload configuration. Remember to free it. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw workqueueIdo Schimmel2019-05-161-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit b442fed1b724af0de087912a5718ddde1b87acbb ] The workqueue is used to periodically update the networking stack about activity / statistics of various objects such as neighbours and TC actions. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. Fixes: 3d5479e92087 ("mlxsw: core: Remove deprecated create_workqueue") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw ordered workqueueIdo Schimmel2019-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4af0699782e2cc7d0d89db9eb6f8844dd3df82dc ] The ordered workqueue is used to offload various objects such as routes and neighbours in the order they are notified. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. This can also result in a warning [1], if a worker tries to flush a non-WQ_MEM_RECLAIM workqueue. [1] [97703.542861] workqueue: WQ_MEM_RECLAIM mlxsw_core_ordered:mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] is flushing !WQ_MEM_RECLAIM events:rht_deferred_worker [97703.542884] WARNING: CPU: 1 PID: 32492 at kernel/workqueue.c:2605 check_flush_dependency+0xb5/0x130 ... [97703.542988] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 [97703.543049] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] [97703.543061] RIP: 0010:check_flush_dependency+0xb5/0x130 ... [97703.543071] RSP: 0018:ffffb3f08137bc00 EFLAGS: 00010086 [97703.543076] RAX: 0000000000000000 RBX: ffff96e07740ae00 RCX: 0000000000000000 [97703.543080] RDX: 0000000000000094 RSI: ffffffff82dc1934 RDI: 0000000000000046 [97703.543084] RBP: ffffb3f08137bc20 R08: ffffffff82dc18a0 R09: 00000000000225c0 [97703.543087] R10: 0000000000000000 R11: 0000000000007eec R12: ffffffff816e4ee0 [97703.543091] R13: ffff96e06f6a5c00 R14: ffff96e077ba7700 R15: ffffffff812ab0c0 [97703.543097] FS: 0000000000000000(0000) GS:ffff96e077a80000(0000) knlGS:0000000000000000 [97703.543101] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [97703.543104] CR2: 00007f8cd135b280 CR3: 00000001e860e003 CR4: 00000000003606e0 [97703.543109] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [97703.543112] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [97703.543115] Call Trace: [97703.543129] __flush_work+0xbd/0x1e0 [97703.543137] ? __cancel_work_timer+0x136/0x1b0 [97703.543145] ? pwq_dec_nr_in_flight+0x49/0xa0 [97703.543154] __cancel_work_timer+0x136/0x1b0 [97703.543175] ? mlxsw_reg_trans_bulk_wait+0x145/0x400 [mlxsw_core] [97703.543184] cancel_work_sync+0x10/0x20 [97703.543191] rhashtable_free_and_destroy+0x23/0x140 [97703.543198] rhashtable_destroy+0xd/0x10 [97703.543254] mlxsw_sp_fib_destroy+0xb1/0xf0 [mlxsw_spectrum] [97703.543310] mlxsw_sp_vr_put+0xa8/0xc0 [mlxsw_spectrum] [97703.543364] mlxsw_sp_fib_node_put+0xbf/0x140 [mlxsw_spectrum] [97703.543418] ? mlxsw_sp_fib6_entry_destroy+0xe8/0x110 [mlxsw_spectrum] [97703.543475] mlxsw_sp_router_fib6_event_work+0x6cd/0x7f0 [mlxsw_spectrum] [97703.543484] process_one_work+0x1fd/0x400 [97703.543493] worker_thread+0x34/0x410 [97703.543500] kthread+0x121/0x140 [97703.543507] ? process_one_work+0x400/0x400 [97703.543512] ? kthread_park+0x90/0x90 [97703.543523] ret_from_fork+0x35/0x40 Fixes: a3832b31898f ("mlxsw: core: Create an ordered workqueue for FIB offload") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Semion Lisyansky <semionl@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* mlxsw: core: Do not use WQ_MEM_RECLAIM for EMAD workqueueIdo Schimmel2019-05-161-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit a8c133b06183c529c51cd0d54eb57d6b7078370c ] The EMAD workqueue is used to handle retransmission of EMAD packets that contain configuration data for the device's firmware. Given the workers need to allocate these packets and that the code is not called as part of memory reclaim path, remove the WQ_MEM_RECLAIM flag. Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* mlxsw: spectrum_switchdev: Add MDB entries in prepare phaseIdo Schimmel2019-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d4d0e40977ac450f32f2db5e4d8e23c9d2578899 ] The driver cannot guarantee in the prepare phase that it will be able to write an MDB entry to the device. In case the driver returned success during the prepare phase, but then failed to add the entry in the commit phase, a WARNING [1] will be generated by the switchdev core. Fix this by doing the work in the prepare phase instead. [1] [ 358.544486] swp12s0: Commit of object (id=2) failed. [ 358.550061] WARNING: CPU: 0 PID: 30 at net/switchdev/switchdev.c:281 switchdev_port_obj_add_now+0x9b/0xe0 [ 358.560754] CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 5.0.0-custom-13382-gf2449babf221 #1350 [ 358.570472] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ 358.580582] Workqueue: events switchdev_deferred_process_work [ 358.587001] RIP: 0010:switchdev_port_obj_add_now+0x9b/0xe0 ... [ 358.614109] RSP: 0018:ffffa6b900d6fe18 EFLAGS: 00010286 [ 358.619943] RAX: 0000000000000000 RBX: ffff8b00797ff000 RCX: 0000000000000000 [ 358.627912] RDX: ffff8b00b7a1d4c0 RSI: ffff8b00b7a152e8 RDI: ffff8b00b7a152e8 [ 358.635881] RBP: ffff8b005c3f5bc0 R08: 000000000000022b R09: 0000000000000000 [ 358.643850] R10: 0000000000000000 R11: ffffa6b900d6fcc8 R12: 0000000000000000 [ 358.651819] R13: dead000000000100 R14: ffff8b00b65a23c0 R15: 0ffff8b00b7a2200 [ 358.659790] FS: 0000000000000000(0000) GS:ffff8b00b7a00000(0000) knlGS:0000000000000000 [ 358.668820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.675228] CR2: 00007f00aad90de0 CR3: 00000001ca80d000 CR4: 00000000001006f0 [ 358.683188] Call Trace: [ 358.685918] switchdev_port_obj_add_deferred+0x13/0x60 [ 358.691655] switchdev_deferred_process+0x6b/0xf0 [ 358.696907] switchdev_deferred_process_work+0xa/0x10 [ 358.702548] process_one_work+0x1f5/0x3f0 [ 358.707022] worker_thread+0x28/0x3c0 [ 358.711099] ? process_one_work+0x3f0/0x3f0 [ 358.715768] kthread+0x10d/0x130 [ 358.719369] ? __kthread_create_on_node+0x180/0x180 [ 358.724815] ret_from_fork+0x35/0x40 Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* net: fec: manage ahb clock in runtime pmAndy Duan2019-05-161-9/+21
| | | | | | | | | | | | | | [ Upstream commit d7c3a206e6338e4ccdf030719dec028e26a521d5 ] Some SOC like i.MX6SX clock have some limits: - ahb clock should be disabled before ipg. - ahb and ipg clocks are required for MAC MII bus. So, move the ahb clock to runtime management together with ipg clock. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* netfilter: nf_tables: add missing ->release_ops() in error path of newrule()Taehee Yoo2019-05-161-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b25a31bf0ca091aa8bdb9ab329b0226257568bbe ] ->release_ops() callback releases resources and this is used in error path. If nf_tables_newrule() fails after ->select_ops(), it should release resources. but it can not call ->destroy() because that should be called after ->init(). At this point, ->release_ops() should be used for releasing resources. Test commands: modprobe -rv xt_tcpudp iptables-nft -I INPUT -m tcp <-- error command lsmod Result: Module Size Used by xt_tcpudp 20480 2 <-- it should be 0 Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* netfilter: nf_tables: use-after-free in dynamic operationsPablo Neira Ayuso2019-05-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3f3a390dbd59d236f62cff8e8b20355ef7069e3d ] Smatch reports: net/netfilter/nf_tables_api.c:2167 nf_tables_expr_destroy() error: dereferencing freed memory 'expr->ops' net/netfilter/nf_tables_api.c 2162 static void nf_tables_expr_destroy(const struct nft_ctx *ctx, 2163 struct nft_expr *expr) 2164 { 2165 if (expr->ops->destroy) 2166 expr->ops->destroy(ctx, expr); ^^^^ --> 2167 module_put(expr->ops->type->owner); ^^^^^^^^^ 2168 } Smatch says there are three functions which free expr->ops. Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* usb: typec: Fix unchecked return valueGustavo A. R. Silva2019-05-161-2/+7
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit e82adc1074a7356f1158233551df9e86b7ebfb82 ] Currently there is no check on platform_get_irq() return value in case it fails, hence never actually reporting any errors and causing unexpected behavior when using such value as argument for function regmap_irq_get_virq(). Fix this by adding a proper check, a message error and return *irq* in case platform_get_irq() fails. Addresses-Coverity-ID: 1443899 ("Improper use of negative value") Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* mm/memory.c: fix modifying of page protection by insert_pfn()Jan Kara2019-05-161-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cae85cb8add35f678cf487139d05e083ce2f570a ] Aneesh has reported that PPC triggers the following warning when excercising DAX code: IP set_pte_at+0x3c/0x190 LR insert_pfn+0x208/0x280 Call Trace: insert_pfn+0x68/0x280 dax_iomap_pte_fault.isra.7+0x734/0xa40 __xfs_filemap_fault+0x280/0x2d0 do_wp_page+0x48c/0xa40 __handle_mm_fault+0x8d0/0x1fd0 handle_mm_fault+0x140/0x250 __do_page_fault+0x300/0xd60 handle_page_fault+0x18 Now that is WARN_ON in set_pte_at which is VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep)); The problem is that on some architectures set_pte_at() cannot cope with a situation where there is already some (different) valid entry present. Use ptep_set_access_flags() instead to modify the pfn which is built to deal with modifying existing PTE. Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz Fixes: b2770da64254 "mm: add vm_insert_mixed_mkwrite()" Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Chandan Rajendra <chandan@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* net: dsa: mv88e6xxx: fix few issues in mv88e6390x_port_set_cmodeHeiner Kallweit2019-05-161-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5ceaeb99ffb4dc002d20f6ac243c19a85e2c7a76 ] This patches fixes few issues in mv88e6390x_port_set_cmode(). 1. When entering the function the old cmode may be 0, in this case mv88e6390x_serdes_get_lane() returns -ENODEV. As result we bail out and have no chance to set a new mode. Therefore deal properly with -ENODEV. 2. Once we have disabled power and irq, let's set the cached cmode to 0. This reflects the actual status and is cleaner if we bail out with an error in the following function calls. 3. The cached cmode is used by mv88e6390x_serdes_get_lane(), mv88e6390_serdes_power_lane() and mv88e6390_serdes_irq_enable(). Currently we set the cached mode to the new one at the very end of the function only, means until then we use the old one what may be wrong. 4. When calling mv88e6390_serdes_irq_enable() we use the lane value belonging to the old cmode. Get the lane belonging to the new cmode before calling this function. It's hard to provide a good "Fixes" tag because quite a few smaller changes have been done to the code in question recently. Fixes: d235c48b40d3 ("net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* powerpc/smp: Fix NMI IPI xmon timeoutNicholas Piggin2019-05-161-64/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 88b9a3d1425a436e95c41f09986fdae2daee437a ] The xmon debugger IPI handler waits in the callback function while xmon is still active. This means they don't complete the IPI, and the initiator always times out waiting for them. Things manage to work after the timeout because there is some fallback logic to keep NMI IPI state sane in case of the timeout, but this is a bit ugly. This patch changes NMI IPI back to half-asynchronous (i.e., wait for everyone to call in, do not wait for IPI function to complete), but the complexity is avoided by going one step further and allowing new IPIs to be issued before the IPI functions to all complete. If synchronization against that is required, it is left up to the caller, but current callers don't require that. In fact with the timeout handling, callers must be able to cope with this already. Fixes: 5b73151fff63 ("powerpc: NMI IPI make NMI IPIs fully sychronous") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* powerpc/smp: Fix NMI IPI timeoutNicholas Piggin2019-05-161-2/+3
| | | | | | | | | | | | | | [ Upstream commit 1b5fc84aba170bdfe3533396ca9662ceea1609b7 ] The NMI IPI timeout logic is broken, if __smp_send_nmi_ipi() times out on the first condition, delay_us will be zero which will send it into the second spin loop with no timeout so it will spin forever. Fixes: 5b73151fff63 ("powerpc: NMI IPI make NMI IPIs fully sychronous") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
* mm/memory_hotplug.c: drop memory device reference after find_memory_block()David Hildenbrand2019-05-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 89c02e69fc5245f8a2f34b58b42d43a737af1a5e ] Right now we are using find_memory_block() to get the node id for the pfn range to online. We are missing to drop a reference to the memory block device. While the device still gets unregistered via device_unregister(), resulting in no user visible problem, the device is never released via device_release(), resulting in a memory leak. Fix that by properly using a put_device(). Link: http://lkml.kernel.org/r/20190411110955.1430-1-david@redhat.com Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pagupta@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Qian Cai <cai@lca.pw> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* RDMA/hns: Bugfix for mapping user dbLijun Ou2019-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2557fabd6e29f349bfa0ac13f38ac98aa5eafc74 ] When the maximum send wr delivered by the user is zero, the qp does not have a sq. When allocating the sq db buffer to store the user sq pi pointer and map it to the kernel mode, max_send_wr is used as the trigger condition, while the kernel does not consider the max_send_wr trigger condition when mapmping db. It will cause sq record doorbell map fail and create qp fail. The failed print information as follows: hns3 0000:7d:00.1: Send cmd: tail - 418, opcode - 0x8504, flag - 0x0011, retval - 0x0000 hns3 0000:7d:00.1: Send cmd: 0xe59dc000 0x00000000 0x00000000 0x00000000 0x00000116 0x0000ffff hns3 0000:7d:00.1: sq record doorbell map failed! hns3 0000:7d:00.1: Create RC QP failed Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Input: synaptics-rmi4 - fix possible double freePan Bian2019-05-161-5/+1
| | | | | | | | | | | | [ Upstream commit bce1a78423961fce676ac65540a31b6ffd179e6d ] The RMI4 function structure has been released in rmi_register_function if error occurs. However, it will be released again in the function rmi_create_function, which may result in a double-free bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/sun4i: Unbind components before releasing DRM and memoryPaul Kocialkowski2019-05-161-2/+3
| | | | | | | | | | | | | | | | | [ Upstream commit e02bc29b2cfa7806830d6da8b2322cddd67e8dfe ] Our components may still be using the DRM device driver (if only to access our driver's private data), so make sure to unbind them before the final drm_dev_put. Also release our reserved memory after component unbind instead of before to match reverse creation order. Fixes: f5a9ed867c83 ("drm/sun4i: Fix component unbinding and component master deletion") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424090413.6918-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: ST ST95HF NFC: declare missing of tableDaniel Gomez2019-05-161-0/+7
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d04830531d0c4a99c897a44038e5da3d23331d2f ] Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/nfc/st95hf/st95hf.ko | grep alias alias: spi:st95hf After this patch: modinfo drivers/nfc/st95hf/st95hf.ko | grep alias alias: spi:st95hf alias: of:N*T*Cst,st95hfC* alias: of:N*T*Cst,st95hf Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: Micrel eth switch: declare missing of tableDaniel Gomez2019-05-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2f23a2a768bee7ad2ff1e9527c3f7e279e794a46 ] Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/net/phy/spi_ks8995.ko | grep alias alias: spi:ksz8795 alias: spi:ksz8864 alias: spi:ks8995 After this patch: modinfo drivers/net/phy/spi_ks8995.ko | grep alias alias: spi:ksz8795 alias: spi:ksz8864 alias: spi:ks8995 alias: of:N*T*Cmicrel,ksz8795C* alias: of:N*T*Cmicrel,ksz8795 alias: of:N*T*Cmicrel,ksz8864C* alias: of:N*T*Cmicrel,ksz8864 alias: of:N*T*Cmicrel,ks8995C* alias: of:N*T*Cmicrel,ks8995 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-14 18:02:02 +0000