summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequencySrinivas Pandruvada2021-02-071-0/+21
| | | | | | | | | | | | | | | | | [ Upstream commit f981dc171c04c6cf5a35c712543b231ebf805832 ] When BIOS disables turbo, The scaling_max_freq in cpufreq sysfs will be limited to config level 0 base frequency. But when user selects a higher config levels, this will result in higher base frequency. But since scaling_max_freq is still old base frequency, the performance will still be limited. So when the turbo is disabled and cpufreq base_frequency is higher than scaling_max_freq, update the scaling_max_freq to the base_frequency. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20201221071859.2783957-2-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* phy: cpcap-usb: Fix warning for missing regulator_disableTony Lindgren2021-02-071-6/+13
| | | | | | | | | | | | | | | | | | [ Upstream commit 764257d9069a9c19758b626cc1ba4ae079335d9e ] On deferred probe, we will get the following splat: cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517 WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78 ... (regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc) (release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0) (really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4) Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201230102105.11826-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* iommu/vt-d: Do not use flush-queue when caching-mode is onNadav Amit2021-02-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 29b32839725f8c89a41cb6ee054c85f3116ea8b5 upstream. When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLDNick Desaulniers2021-02-071-0/+1
| | | | | | | | | | | | | | | | commit 28187dc8ebd938d574edfc6d9e0f9c51c21ff3f4 upstream. LLD does not yet support any big endian architectures. Make this config non-selectable when using LLD until LLD is fixed. Link: https://github.com/ClangBuiltLinux/linux/issues/965 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "x86/setup: don't remove E820_TYPE_RAM for pfn 0"Mike Rapoport2021-02-071-9/+11
| | | | | | | | | | | | | | | | | | | | | | commit 5c279c4cf206e03995e04fd3404fa95ffd243a97 upstream. This reverts commit bde9cfa3afe4324ec251e4af80ebf9b7afaf7afe. Changing the first memory page type from E820_TYPE_RESERVED to E820_TYPE_RAM makes it a part of "System RAM" resource rather than a reserved resource and this in turn causes devmem_is_allowed() to treat is as area that can be accessed but it is filled with zeroes instead of the actual data as previously. The change in /dev/mem output causes lilo to fail as was reported at slakware users forum, and probably other legacy applications will experience similar problems. Link: https://www.linuxquestions.org/questions/slackware-14/slackware-current-lilo-vesa-warnings-after-recent-updates-4175689617/#post6214439 Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* arm64: Do not pass tagged addresses to __is_lm_address()Catalin Marinas2021-02-072-2/+2
| | | | | | | | | | | | | | | | | | | | | | commit 91cb2c8b072e00632adf463b78b44f123d46a0fa upstream. Commit 519ea6f1c82f ("arm64: Fix kernel address detection of __is_lm_address()") fixed the incorrect validation of addresses below PAGE_OFFSET. However, it no longer allowed tagged addresses to be passed to virt_addr_valid(). Fix this by explicitly resetting the pointer tag prior to invoking __is_lm_address(). This is consistent with the __lm_to_phys() macro. Fixes: 519ea6f1c82f ("arm64: Fix kernel address detection of __is_lm_address()") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Cc: <stable@vger.kernel.org> # 5.4.x Cc: Will Deacon <will@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210201190634.22942-2-catalin.marinas@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* arm64: Fix kernel address detection of __is_lm_address()Vincenzo Frascino2021-02-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | commit 519ea6f1c82fcdc9842908155ae379de47818778 upstream. Currently, the __is_lm_address() check just masks out the top 12 bits of the address, but if they are 0, it still yields a true result. This has as a side effect that virt_addr_valid() returns true even for invalid virtual addresses (e.g. 0x0). Fix the detection checking that it's actually a kernel address starting at PAGE_OFFSET. Fixes: 68dd8ef32162 ("arm64: memory: Fix virt_addr_valid() using __is_lm_address()") Cc: <stable@vger.kernel.org> # 5.4.x Cc: Will Deacon <will@kernel.org> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20210126134056.45747-1-vincenzo.frascino@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* arm64: dts: meson: Describe G12b GPU as coherentRobin Murphy2021-02-071-0/+4
| | | | | | | | | | | | | | | | | | commit 03544505cb10ddc73df3b6176e71cdb366834134 upstream. According to a downstream commit I found in the Khadas vendor kernel, the GPU on G12b is wired up for ACE-lite, so (now that Panfrost knows how to handle this properly) we should describe it as such. Otherwise the mismatch leads to all manner of fun with mismatched attributes and inadvertently snooping stale data from caches, which would account for at least some of the brokenness observed on this platform. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/765446e529e50b304af63432da7836c4d31eb8d4.1600780574.git.robin.murphy@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/panfrost: Support cache-coherent integrationsRobin Murphy2021-02-074-0/+6
| | | | | | | | | | | | | | | | | | | commit 268af50f38b1f2199a2e85e38073d7a25c20190c upstream. When the GPU's ACE-Lite interface is fully wired up and capable of snooping CPU caches, it may be described as "dma-coherent" in devicetree, which will already inform the DMA layer not to perform unnecessary cache maintenance. However, we still need to ensure that the GPU uses the appropriate cacheable outer-shareable attributes in order to generate the requisite snoop signals, and that CPU mappings don't create a mismatch by using a non-cacheable type either. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/7024ce18c1cb1a226e918037d49175571db0b436.1600780574.git.robin.murphy@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iommu/io-pgtable-arm: Support coherency for Mali LPAERobin Murphy2021-02-071-1/+10
| | | | | | | | | | | | | | | | | | | | commit 728da60da7c1ec1e21ae64648e376666de3c279c upstream. Midgard GPUs have ACE-Lite master interfaces which allows systems to integrate them in an I/O-coherent manner. It seems that from the GPU's viewpoint, the rest of the system is its outer shareable domain, and so even when snoop signals are wired up, they are only emitted for outer shareable accesses. As such, setting the TTBR_SHARE_OUTER bit does indeed get coherent pagetable walks working nicely for the coherent T620 in the Arm Juno SoC. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/8df778355378127ea7eccc9521d6427e3e48d4f2.1600780574.git.robin.murphy@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ibmvnic: Ensure that CRQ entry read are correctly orderedLijun Pan2021-02-071-0/+6
| | | | | | | | | | | | | | | commit e41aec79e62fa50f940cf222d1e9577f14e149dc upstream. Ensure that received Command-Response Queue (CRQ) entries are properly read in order by the driver. dma_rmb barrier has been added before accessing the CRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPPRasmus Villemoes2021-02-071-10/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 20776b465c0c249f5e5b5b4fe077cd24ef1cda86 upstream. It's not true that switchdev_port_obj_notify() only inspects the ->handled field of "struct switchdev_notifier_port_obj_info" if call_switchdev_blocking_notifiers() returns 0 - there's a WARN_ON() triggering for a non-zero return combined with ->handled not being true. But the real problem here is that -EOPNOTSUPP is not being properly handled. The wrapper functions switchdev_handle_port_obj_add() et al change a return value of -EOPNOTSUPP to 0, and the treatment of ->handled in switchdev_port_obj_notify() seems to be designed to change that back to -EOPNOTSUPP in case nobody actually acted on the notifier (i.e., everybody returned -EOPNOTSUPP). Currently, as soon as some device down the stack passes the check_cb() check, ->handled gets set to true, which means that switchdev_port_obj_notify() cannot actually ever return -EOPNOTSUPP. This, for example, means that the detection of hardware offload support in the MRP code is broken: switchdev_port_obj_add() used by br_mrp_switchdev_send_ring_test() always returns 0, so since the MRP code thinks the generation of MRP test frames has been offloaded, no such frames are actually put on the wire. Similarly, br_mrp_switchdev_set_ring_role() also always returns 0, causing mrp->ring_role_offloaded to be set to 1. To fix this, continue to set ->handled true if any callback returns success or any error distinct from -EOPNOTSUPP. But if all the callbacks return -EOPNOTSUPP, make sure that ->handled stays false, so the logic in switchdev_port_obj_notify() can propagate that information. Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: f30f0601eb93 ("switchdev: Add helpers to aid traversal through lower devices") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20210125124116.102928-1-rasmus.villemoes@prevas.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: put device node before returnPan Bian2021-02-071-2/+6
| | | | | | | | | | | | commit cf3c46631e1637582f517a574c77cd6c05793817 upstream. Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlxsw: spectrum_span: Do not overwrite policer configurationIdo Schimmel2021-02-072-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | commit b6f6881aaf2344bf35a4221810737abe5fd210af upstream. The purpose of the delayed work in the SPAN module is to potentially update the destination port and various encapsulation parameters of SPAN agents that point to a VLAN device or a GRE tap. The destination port can change following the insertion of a new route, for example. SPAN agents that point to a physical port or the CPU port are static and never change throughout the lifetime of the SPAN agent. Therefore, skip over them in the delayed work. This fixes an issue where the delayed work overwrites the policer that was set on a SPAN agent pointing to the CPU. Modifying the delayed work to inherit the original policer configuration is error-prone, as the same will be needed for any new parameter. Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressingVoon Weifeng2021-02-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7cfc4486e7ea25bd405df162d9c131ee5d4c6c93 upstream. Fix an issue where dump stack is printed and Reset Adapter occurs when PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use 32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing. [ 25.535095] ------------[ cut here ]------------ [ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out [ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260 [ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore [ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5 [ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020 [ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260 [ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7 [ 25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286 [ 25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103 [ 25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff [ 25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff [ 25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c [ 25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940 [ 25.731425] FS: 0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000 [ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0 [ 25.754900] Call Trace: [ 25.757631] <IRQ> [ 25.759891] ? qdisc_put_unlocked+0x30/0x30 [ 25.764565] ? qdisc_put_unlocked+0x30/0x30 [ 25.769245] call_timer_fn+0x2e/0x140 [ 25.773346] run_timer_softirq+0x1f3/0x430 [ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0 [ 25.783005] ? ktime_get+0x3e/0xa0 [ 25.786812] __do_softirq+0xa6/0x2ef [ 25.790816] asm_call_irq_on_stack+0xf/0x20 [ 25.795501] </IRQ> [ 25.797852] do_softirq_own_stack+0x5d/0x80 [ 25.802538] irq_exit_rcu+0x94/0xb0 [ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0 [ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370 [ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1 [ 25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206 [ 25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f [ 25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d [ 25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00 [ 25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0 [ 25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000 [ 25.889918] cpuidle_enter+0x29/0x40 [ 25.893922] do_idle+0x24a/0x290 [ 25.897536] cpu_startup_entry+0x19/0x20 [ 25.901930] start_secondary+0x128/0x160 [ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb [ 25.911983] ---[ end trace b4c0c8195d0ba61f ]--- [ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter. Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: octeontx2: Make sure the buffer is 128 byte alignedKevin Hao2021-02-071-1/+2
| | | | | | | | | | | | | | | | | | commit db2805150a0f27c00ad286a29109397a7723adad upstream. The octeontx2 hardware needs the buffer to be 128 byte aligned. But in the current implementation of napi_alloc_frag(), it can't guarantee the return address is 128 byte aligned even the request size is a multiple of 128 bytes, so we have to request an extra 128 bytes and use the PTR_ALIGN() to make sure that the buffer is aligned correctly. Fixes: 7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers") Reported-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec: put child node on error pathPan Bian2021-02-071-1/+2
| | | | | | | | | | | | commit 0607a2cddb60f4548b55e28ac56a8d73493a45bb upstream. Also decrement the reference count of child device on error path. Fixes: 3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: stmmac: dwmac-intel-plat: remove config data on errorPan Bian2021-02-071-2/+2
| | | | | | | | | | | | commit 3765d86ffcd346913c372d69cdc05dc8d56119ac upstream. Remove the config data when rate setting fails. Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: microchip: Adjust reset release timing to match reference reset ↵Marek Vasut2021-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | circuit commit 1c45ba93d34cd6af75228f34d0675200c81738b5 upstream. KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended circuit for interfacing with CPU/FPGA reset consisting of 10k pullup resistor and 10uF capacitor to ground. This circuit takes ~100 ms to rise enough to release the reset. For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is VDDIO - VIH t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s VDDIO so we need ~95 ms for the reset to really de-assert, and then the original 100us for the switch itself to come out of reset. Simply msleep() for 100 ms which fits the constraint with a bit of extra space. Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset timing") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Linux 5.10.13v5.10.13Greg Kroah-Hartman2021-02-031-1/+1
| | | | | | | | | | Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210202132957.692094111@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vsock: fix the race conditions in multi-transport supportAlexander Popov2021-02-031-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | commit c518adafa39f37858697ac9309c6cf1805581446 upstream. There are multiple similar bugs implicitly introduced by the commit c0cfa2d8a788fcf4 ("vsock: add multi-transports support") and commit 6a2c0962105ae8ce ("vsock: prevent transport modules unloading"). The bug pattern: [1] vsock_sock.transport pointer is copied to a local variable, [2] lock_sock() is called, [3] the local variable is used. VSOCK multi-transport support introduced the race condition: vsock_sock.transport value may change between [1] and [2]. Let's copy vsock_sock.transport pointer to local variables after the lock_sock() call. Fixes: c0cfa2d8a788fcf4 ("vsock: add multi-transports support") Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPENPengcheng Yang2021-02-033-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 62d9f1a6945ba69c125e548e72a36d203b30596e upstream. Upon receiving a cumulative ACK that changes the congestion state from Disorder to Open, the TLP timer is not set. If the sender is app-limited, it can only wait for the RTO timer to expire and retransmit. The reason for this is that the TLP timer is set before the congestion state changes in tcp_ack(), so we delay the time point of calling tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer is set. This commit has two additional benefits: 1) Make sure to reset RTO according to RFC6298 when receiving ACK, to avoid spurious RTO caused by RTO timer early expires. 2) Reduce the xmit timer reschedule once per ACK when the RACK reorder timer is set. Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed") Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Cc: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: make TCP_USER_TIMEOUT accurate for zero window probesEnke Chen2021-02-034-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | commit 344db93ae3ee69fc137bd6ed89a8ff1bf5b0db08 upstream. The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the timer has backoff with a max interval of about two minutes, the actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes. In this patch the TCP_USER_TIMEOUT is made more accurate by taking it into account when computing the timer value for the 0-window probes. This patch is similar to and builds on top of the one that made TCP_USER_TIMEOUT accurate for RTOs in commit b701a99e431d ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy"). Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT") Signed-off-by: Enke Chen <enchen@paloaltonetworks.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210122191306.GA99540@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* team: protect features update by RCU to avoid deadlockIvan Vecera2021-02-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f0947d0d21b219e03940b9be6628a43445c0de7a upstream. Function __team_compute_features() is protected by team->lock mutex when it is called from team_compute_features() used when features of an underlying device is changed. This causes a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device is fired due to change propagated from team driver (e.g. MTU change). It's because callbacks like team_change_mtu() or team_vlan_rx_{add,del}_vid() protect their port list traversal by team->lock mutex. Example (r8169 case where this driver disables TSO for certain MTU values): ... [ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0 [ 6391.358602] team_device_event+0x9d/0x160 [team] [ 6391.363756] notifier_call_chain+0x47/0x70 [ 6391.368329] netdev_update_features+0x56/0x60 [ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169] [ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.387022] dev_set_mtu+0x52/0x90 [ 6391.390820] team_change_mtu+0x64/0xf0 [team] [ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.399963] do_setlink+0x231/0xf50 ... In fact team_compute_features() called from team_device_event() does not need to be protected by team->lock mutex and rcu_read_lock() is sufficient there for port list traversal. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limitEnzo Matsumiya2021-02-031-1/+1
| | | | | | | | | | | | | | | commit aa2c24e7f415e9c13635cee22ff4e15a80215551 upstream. Parameter ql2xenforce_iocb_limit is enabled by default. Link: https://lore.kernel.org/r/20210118184922.23793-1-ematsumiya@suse.de Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values()Dan Carpenter2021-02-031-1/+1
| | | | | | | | | | | | | | | commit 543466ef3571069b8eb13a8ff7c7cfc8d8a75c43 upstream. The allocation uses sizeof(u32) when it should use sizeof(unsigned long) so it leads to memory corruption later in the function when the data is initialized. Fixes: 5aebe7c7f9c2 ("ASoC: topology: fix endianness issues") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YAf+8QZoOv+ct526@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: topology: Properly unregister DAI on removalAmadeusz Sławiński2021-02-031-4/+5
| | | | | | | | | | | | | | | | | commit fc4cb1e15f0c66f2e37314349dc4a82bd946fbb1 upstream. DAIs need to be removed when topology unload function is called (usually done when component is being removed). We can't do this when device is being removed, as structures we operate on when removing DAI can already be freed. Fixes: 6ae4902f2f34 ("ASoC: soc-topology: use devm_snd_soc_register_dai()") Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210120152846.1703655-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by defaultTzung-Bi Shih2021-02-031-1/+4
| | | | | | | | | | | | | | commit 5ac154443e686b06242aa49de30a12b74ea9ca98 upstream. hdmi-codec is an optional property. Ignore to bind TDM DAI link if the property isn't specified. Fixes: f2024dc55fcb ("ASoC: mediatek: mt8183: use hdmi-codec") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210120092237.1553938-2-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by defaultTzung-Bi Shih2021-02-031-1/+4
| | | | | | | | | | | | | | commit 4d36ed8eb0f749c9e781e0d3b041a7adeedcdaa9 upstream. hdmi-codec is an optional property. Ignore to bind TDM DAI link if the property isn't specified. Fixes: 5bdbe9771177 ("ASoC: mediatek: mt8183-da7219: use hdmi-codec") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210120092237.1553938-3-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFC: fix possible resource leakPan Bian2021-02-031-0/+1
| | | | | | | | | | | | | | commit d8f923c3ab96dbbb4e3c22d1afc1dc1d3b195cd8 upstream. Put the device to avoid resource leak on path that the polling flag is invalid. Fixes: a831b9132065 ("NFC: Do not return EBUSY when stopping a poll that's already stopped") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121153745.122184-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFC: fix resource leak when target index is invalidPan Bian2021-02-031-1/+1
| | | | | | | | | | | | | | commit 3a30537cee233fb7da302491b28c832247d89bbe upstream. Goto to the label put_dev instead of the label error to fix potential resource leak on path that the target index is invalid. Fixes: c4fbb6515a4d ("NFC: The core part should generate the target index") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121152748.98409-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rxrpc: Fix memory leak in rxrpc_lookup_localTakeshi Misawa2021-02-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b8323f7288abd71794cd7b11a4c0a38b8637c8b5 upstream. Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked. struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp) - peer->local = local; + peer->local = rxrpc_get_local(local); rxrpc_discard_prealloc also need ref release in discarding. syzbot report: BUG: memory leak unreferenced object 0xffff8881080ddc00 (size 256): comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff ................ backtrace: [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline] [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline] [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline] [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244 [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149 [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64 [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126 [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152 [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342 [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483 [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110 [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226 [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957 [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline] [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline] [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023 [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* selftests: forwarding: Specify interface when invoking mausezahnDanielle Ratson2021-02-032-2/+2
| | | | | | | | | | | | | | | [ Upstream commit 11df27f7fdf02cc2bb354358ad482e1fdd690589 ] Specify the interface through which packets should be transmitted so that the test will pass regardless of the libnet version against which mausezahn is linked. Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects") Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nvme-multipath: Early exit if no path is availableDaniel Wagner2021-02-031-1/+1
| | | | | | | | | | | | | [ Upstream commit d1bcf006a9d3d63c1bcb65a993cb13756954cd9c ] nvme_round_robin_path() should test if the return ns pointer is valid. nvme_next_ns() will return a NULL pointer if there is no path left. Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy") Signed-off-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()Lu Baolu2021-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 494b3688bb11a21af12e92a344a1313486693d47 ] An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid() to check the address alignment. This leads to a lot of spurious kernel warnings: [ 485.837093] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0 [ 485.837098] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0 [ 492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed [ 492.494147] DMAR: Invalidate non-aligned address 7f7728800000, order 11 [ 492.508965] DMAR: Invalidate non-aligned address 7f7728800000, order 11 Fix it by checking the alignment in right way. Fixes: 288d08e780088 ("iommu/vt-d: Handle non-page aligned address") Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Liu Yi L <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* iommu/amd: Use IVHD EFR for early initialization of IOMMU featuresSuravee Suthikulpanit2021-02-033-7/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a44092e326d403c7878018ba532369f84d31dbfa ] IOMMU Extended Feature Register (EFR) is used to communicate the supported features for each IOMMU to the IOMMU driver. This is normally read from the PCI MMIO register offset 0x30, and used by the iommu_feature() helper function. However, there are certain scenarios where the information is needed prior to PCI initialization, and the iommu_feature() function is used prematurely w/o warning. This has caused incorrect initialization of IOMMU. This is the case for the commit 6d39bdee238f ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures") Since, the EFR is also available in the IVHD header, and is available to the driver prior to PCI initialization. Therefore, default to using the IVHD EFR instead. Fixes: 6d39bdee238f ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Brijesh Singh <brijesh.singh@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* of/device: Update dma_range_map only when dev has valid dma-rangesYong Wu2021-02-031-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 89c7cb1608ac3c7ecc19436469f35ed12da97e1d ] The commit e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") always update dma_range_map even though it was already set, like in the sunxi_mbus driver. the issue is reported at [1]. This patch avoid this(Updating it only when dev has valid dma-ranges). Meanwhile, dma_range_map contains the devices' dma_ranges information, This patch moves dma_range_map before of_iommu_configure. The iommu driver may need to know the dma_address requirements of its iommu consumer devices. [1] https://lore.kernel.org/linux-arm-kernel/5c7946f3-b56e-da00-a750-be097c7ceb32@arm.com/ CC: Frank Rowand <frowand.list@gmail.com> Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset"), Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210119105203.15530-1-yong.wu@mediatek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* ACPI/IORT: Do not blindly trust DMA masks from firmwareMoritz Fischer2021-02-031-2/+12
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a1df829ead5877d4a1061e976a50e2e665a16f24 ] Address issue observed on real world system with suboptimal IORT table where DMA masks of PCI devices would get set to 0 as result. iort_dma_setup() would query the root complex'/named component IORT entry for a DMA mask, and use that over the one the device has been configured with earlier. Ideally we want to use the minimum mask of what the IORT contains for the root complex and what the device was configured with. Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Signed-off-by: Moritz Fischer <mdf@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210122012419.95010-1-mdf@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* can: dev: prevent potential information leak in can_fill_info()Dan Carpenter2021-02-031-1/+1
| | | | | | | | | | | | | | [ Upstream commit b552766c872f5b0d90323b24e4c9e8fa67486dd5 ] The "bec" struct isn't necessarily always initialized. For example, the mcp251xfd_get_berr_counter() function doesn't initialize anything if the interface is down. Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters") Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtablePaul Blakey2021-02-031-7/+13
| | | | | | | | | | | | | | | | | | | [ Upstream commit e2194a1744e8594e82a861687808c1adca419b85 ] If a non nat tuple entry is inserted just to the regular tuples rhashtable (ct_tuples_ht) and not to natted tuples rhashtable (ct_nat_tuples_ht). Commit bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") mixed up the return labels and names sot that on cleanup or failure we still try to remove for the natted tuples rhashtable. Fix that by correctly checking if a natted tuples insertion before removing it. While here make it more readable. Fixes: bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Revert parameters on errors when changing MTU and LRO state ↵Maxim Mikityanskiy2021-02-031-9/+21
| | | | | | | | | | | | | | | | | | | | without reset [ Upstream commit 8355060f5ec381abda77659f91f56302203df535 ] Sometimes, channel params are changed without recreating the channels. It happens in two basic cases: when the channels are closed, and when the parameter being changed doesn't affect how channels are configured. Such changes invoke a hardware command that might fail. The whole operation should be reverted in such cases, but the code that restores the parameters' values in the driver was missing. This commit adds this handling. Fixes: 2e20a151205b ("net/mlx5e: Fail safe mtu and lro setting") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Revert parameters on errors when changing trust state without resetMaxim Mikityanskiy2021-02-031-5/+8
| | | | | | | | | | | | | | | | | [ Upstream commit 912c9b5fcca1ab65b806c19dd3b3cb12d73c6fe2 ] Trust state may be changed without recreating the channels. It happens when the channels are closed, and when channel parameters (min inline mode) stay the same after changing the trust state. Changing the trust state is a hardware command that may fail. The current code didn't restore the channel parameters to their old values if an error happened and the channels were closed. This commit adds handling for this case. Fixes: 6e0504c69811 ("net/mlx5e: Change inline mode correctly when changing trust state") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Correctly handle changing the number of queues when the interface ↵Maxim Mikityanskiy2021-02-032-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | is down [ Upstream commit 57ac4a31c48377a3e675b2a731ceacbefefcd34d ] This commit addresses two issues related to changing the number of queues when the channels are closed: 1. Missing call to mlx5e_num_channels_changed to update real_num_tx_queues when the number of TCs is changed. 2. When mlx5e_num_channels_changed returns an error, the channel parameters must be reverted. Two Fixes: tags correspond to the first commits where these two issues were introduced. Fixes: 3909a12e7913 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases") Fixes: fa3748775b92 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Fix CT rule + encap slow path offload and deletionPaul Blakey2021-02-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 89e394675818bde8e30e135611c506455fa03fb7 ] Currently, if a neighbour isn't valid when offloading tunnel encap rules, we offload the original match and replace the original action with "goto slow path" action. For this we use a temporary flow attribute based on the original flow attribute and then change the action. Flow flags, which among those is the CT flag, are still shared for the slow path rule offload, so we end up parsing this flow as a CT + goto slow path rule. Besides being unnecessary, CT action offload saves extra information in the passed flow attribute, such as created ct_flow and mod_hdr, which is lost onces the temporary flow attribute is freed. When a neigh is updated and is valid, we offload the original CT rule with original CT action, which again creates a ct_flow and mod_hdr and saves it in the flow's original attribute. Then we delete the slow path rule with a temporary flow attribute based on original updated flow attribute, and we free the relevant ct_flow and mod_hdr. Then when tc deletes this flow, we try to free the ct_flow and mod_hdr on the flow's attribute again. To fix the issue, skip all furture proccesing (CT/Sample/Split rules) in offload/unoffload of slow path rules. Call trace: [ 758.850525] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000218 [ 758.952987] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O) [ 758.964225] ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E) [ 759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G OE 5.4.60-mlnx.52.gde81e85 #1 [ 759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan 4 2021 [ 759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [ 759.207344] pstate: a0000005 (NzCv daif -PAN -UAO) [ 759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core] [ 759.405858] Call trace: [ 759.410804] mlx5_del_flow_rules+0x5c/0x160 [mlx5_core] [ 759.421337] __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core] [ 759.433963] mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core] [ 759.446942] mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core] [ 759.457821] mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core] [ 759.469051] mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core] [ 759.481325] mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core] [ 759.492901] mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core] [ 759.504127] mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core] [ 759.515314] process_one_work+0x178/0x400 [ 759.523350] worker_thread+0x58/0x3e8 [ 759.530685] kthread+0x100/0x12c [ 759.537152] ret_from_fork+0x10/0x18 [ 759.544320] Code: 97ffef55 51000673 3100067f 54ffff41 (b9421ab3) [ 759.556548] ---[ end trace fab818bb1085832d ]--- Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabledMaor Dickman2021-02-032-1/+3
| | | | | | | | | | | | | | | | | | [ Upstream commit 156878d0e697187c7d207ee6c22afe50b7f3678c ] The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable to control compilation of TC hardware offloads implementation. When this configuration is disabled the driver is still wrongly reports in ethtool that hw-tc-offload is supported. Fixed by reporting hw-tc-offload is supported only when CONFIG_MLX5_CLS_ACT is enabled. Fixes: d956873f908c ("net/mlx5e: Introduce kconfig var for TC support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: Maintain separate page trees for ECPF and PF functionsDaniel Jurgens2021-02-031-24/+34
| | | | | | | | | | | | | | | | | [ Upstream commit 0aa128475d33d2d0095947eeab6b3e4d22dbd578 ] Pages for the host PF and ECPF were stored in the same tree, so the ECPF pages were being freed along with the host PF's when the host driver unloaded. Combine the function ID and ECPF flag to use as an index into the x-array containing the trees to get a different tree for the host PF and ECPF. Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Reduce tc unsupported key print levelMaor Dickman2021-02-031-2/+2
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 48470a90a42a64dd2f70743a149894a292b356e0 ] "Unsupported key used:" appears in kernel log when flows with unsupported key are used, arp fields for example. OpenVSwitch was changed to match on arp fields by default that caused this warning to appear in kernel log for every arp rule, which can be a lot. Fix by lowering print level from warning to debug. Fixes: e3a2b7ed018e ("net/mlx5e: Support offload cls_flower with drop action") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: free page before returnPan Bian2021-02-031-1/+1
| | | | | | | | | | | | | [ Upstream commit 258ed19f075fbc834fe5d69d8b54983fc11e0d4a ] Instead of directly return, goto the error handling label to free allocated page. Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: E-switch, Fix rate calculation for overflowParav Pandit2021-02-031-3/+8
| | | | | | | | | | | | | | | | | [ Upstream commit 1fe3e3166b35240615ab7f8276af2bbf2e51f559 ] rate_bytes_ps is a 64-bit field. It passed as 32-bit field to apply_police_params(). Due to this when police rate is higher than 4Gbps, 32-bit calculation ignores the carry. This results in incorrect rate configurationn the device. Fix it by performing 64-bit calculation. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: Fix memory leak on flow table creation error flowRoi Dayan2021-02-031-0/+1
| | | | | | | | | | | | | [ Upstream commit 487c6ef81eb98d0a43cb08be91b1fcc9b4250626 ] When we create the ft object we also init rhltable in ft->fgs_hash. So in error flow before kfree of ft we need to destroy that rhltable. Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 14:34:52 +0000