summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Linux 5.8.15v5.8.15Greg Kroah-Hartman2020-10-141-1/+1
| | | | | | | | | | Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20201012133146.834528783@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net_sched: commit action insertions togetherCong Wang2020-10-141-9/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0fedc63fadf0404a729e73a35349481c8009c02f upstream. syzbot is able to trigger a failure case inside the loop in tcf_action_init(), and when this happens we clean up with tcf_action_destroy(). But, as these actions are already inserted into the global IDR, other parallel process could free them before tcf_action_destroy(), then we will trigger a use-after-free. Fix this by deferring the insertions even later, after the loop, and committing all the insertions in a separate loop, so we will never fail in the middle of the insertions any more. One side effect is that the window between alloction and final insertion becomes larger, now it is more likely that the loop in tcf_del_walker() sees the placeholder -EBUSY pointer. So we have to check for error pointer in tcf_del_walker(). Reported-and-tested-by: syzbot+2287853d392e4b42374a@syzkaller.appspotmail.com Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net_sched: defer tcf_idr_insert() in tcf_action_init_1()Cong Wang2020-10-1422-66/+21
| | | | | | | | | | | | | | | | | | | | | | | | commit e49d8c22f1261c43a986a7fdbf677ac309682a07 upstream. All TC actions call tcf_idr_insert() for new action at the end of their ->init(), so we can actually move it to a central place in tcf_action_init_1(). And once the action is inserted into the global IDR, other parallel process could free it immediately as its refcnt is still 1, so we can not fail after this, we need to move it after the goto action validation to avoid handling the failure case after insertion. This is found during code review, is not directly triggered by syzbot. And this prepares for the next patch. Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: qrtr: ns: Protect radix_tree_deref_slot() using rcu read locksManivannan Sadhasivam2020-10-141-9/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a7809ff90ce6c48598d3c4ab54eb599bec1e9c42 upstream. The rcu read locks are needed to avoid potential race condition while dereferencing radix tree from multiple threads. The issue was identified by syzbot. Below is the crash report: ============================= WARNING: suspicious RCU usage 5.7.0-syzkaller #0 Not tainted ----------------------------- include/linux/radix-tree.h:176 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by kworker/u4:1/21: #0: ffff88821b097938 ((wq_completion)qrtr_ns_handler){+.+.}-{0:0}, at: spin_unlock_irq include/linux/spinlock.h:403 [inline] #0: ffff88821b097938 ((wq_completion)qrtr_ns_handler){+.+.}-{0:0}, at: process_one_work+0x6df/0xfd0 kernel/workqueue.c:2241 #1: ffffc90000dd7d80 ((work_completion)(&qrtr_ns.work)){+.+.}-{0:0}, at: process_one_work+0x71e/0xfd0 kernel/workqueue.c:2243 stack backtrace: CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.7.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: qrtr_ns_handler qrtr_ns_worker Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1e9/0x30e lib/dump_stack.c:118 radix_tree_deref_slot include/linux/radix-tree.h:176 [inline] ctrl_cmd_new_lookup net/qrtr/ns.c:558 [inline] qrtr_ns_worker+0x2aff/0x4500 net/qrtr/ns.c:674 process_one_work+0x76e/0xfd0 kernel/workqueue.c:2268 worker_thread+0xa7f/0x1450 kernel/workqueue.c:2414 kthread+0x353/0x380 kernel/kthread.c:268 Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Reported-and-tested-by: syzbot+0f84f6eed90503da72fc@syzkaller.appspotmail.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: usb: rtl8150: set random MAC address when set_ethernet_addr() failsAnant Thazhemadam2020-10-141-4/+12
| | | | | | | | | | | | | | | | | | | | | | | commit f45a4248ea4cc13ed50618ff066849f9587226b2 upstream. When get_registers() fails in set_ethernet_addr(),the uninitialized value of node_id gets copied over as the address. So, check the return value of get_registers(). If get_registers() executed successfully (i.e., it returns sizeof(node_id)), copy over the MAC address using ether_addr_copy() (instead of using memcpy()). Else, if get_registers() failed instead, a randomly generated MAC address is set as the MAC address instead. Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com Acked-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: ati_remote2 - add missing newlines when printing module parametersXiongfeng Wang2020-10-141-2/+2
| | | | | | | | | | | | | | | | | commit 37bd9e803daea816f2dc2c8f6dc264097eb3ebd2 upstream. When I cat some module parameters by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask 0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask 0xffffroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty/vt: Do not warn when huge selection requestedAlexey Kardashevskiy2020-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit 44c413d9a51752056d606bf6f312003ac1740fab upstream. The tty TIOCL_SETSEL ioctl allocates a memory buffer big enough for text selection area. The maximum allowed console size is VC_RESIZE_MAXCOL * VC_RESIZE_MAXROW == 32767*32767 == ~1GB and typical MAX_ORDER is set to allow allocations lot less than than (circa 16MB). So it is quite possible to trigger huge allocation (and syzkaller just did that) which is going to fail (which is fine) with a backtrace in mm/page_alloc.c at WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN)) and this may trigger panic (if panic_on_warn is enabled) and leak kernel addresses to dmesg. This passes __GFP_NOWARN to kmalloc_array to avoid unnecessary user- triggered WARN_ON. Note that the error is not ignored and the warning is still printed. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Link: https://lore.kernel.org/r/20200617070444.116704-1-aik@ozlabs.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Fix driver's declaration to support GRE offloadAya Levin2020-10-141-1/+18
| | | | | | | | | | | | | | | | | commit 3d093bc2369003b4ce6c3522d9b383e47c40045d upstream. Declare GRE offload support with respect to the inner protocol. Add a list of supported inner protocols on which the driver can offload checksum and GSO. For other protocols, inform the stack to do the needed operations. There is no noticeable impact on GRE performance. Fixes: 2729984149e6 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/tls: race causes kernel panicRohit Maheshwari2020-10-141-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 38f7e1c0c43dd25b06513137bb6fd35476f9ec6d upstream. BUG: kernel NULL pointer dereference, address: 00000000000000b8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000008b6fef067 P4D 80000008b6fef067 PUD 8b6fe6067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 12 PID: 23871 Comm: kworker/12:80 Kdump: loaded Tainted: G S 5.9.0-rc3+ #1 Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.1 03/29/2018 Workqueue: events tx_work_handler [tls] RIP: 0010:tx_work_handler+0x1b/0x70 [tls] Code: dc fe ff ff e8 16 d4 a3 f6 66 0f 1f 44 00 00 0f 1f 44 00 00 55 53 48 8b 6f 58 48 8b bd a0 04 00 00 48 85 ff 74 1c 48 8b 47 28 <48> 8b 90 b8 00 00 00 83 e2 02 75 0c f0 48 0f ba b0 b8 00 00 00 00 RSP: 0018:ffffa44ace61fe88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff91da9e45cc30 RCX: dead000000000122 RDX: 0000000000000001 RSI: ffff91da9e45cc38 RDI: ffff91d95efac200 RBP: ffff91da133fd780 R08: 0000000000000000 R09: 000073746e657665 R10: 8080808080808080 R11: 0000000000000000 R12: ffff91dad7d30700 R13: ffff91dab6561080 R14: 0ffff91dad7d3070 R15: ffff91da9e45cc38 FS: 0000000000000000(0000) GS:ffff91dad7d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b8 CR3: 0000000906478003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: process_one_work+0x1a7/0x370 worker_thread+0x30/0x370 ? process_one_work+0x370/0x370 kthread+0x114/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 tls_sw_release_resources_tx() waits for encrypt_pending, which can have race, so we need similar changes as in commit 0cada33241d9de205522e3858b18e506ca5cce2c here as well. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: bridge: fdb: don't flush ext_learn entriesNikolay Aleksandrov2020-10-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | commit f2f3729fb65c5c2e6db234e6316b71a7bdc4b30b upstream. When a user-space software manages fdb entries externally it should set the ext_learn flag which marks the fdb entry as externally managed and avoids expiring it (they're treated as static fdbs). Unfortunately on events where fdb entries are flushed (STP down, netlink fdb flush etc) these fdbs are also deleted automatically by the bridge. That in turn causes trouble for the managing user-space software (e.g. in MLAG setups we lose remote fdb entries on port flaps). These entries are completely externally managed so we should avoid automatically deleting them, the only exception are offloaded entries (i.e. BR_FDB_ADDED_BY_EXT_LEARN + BR_FDB_OFFLOADED). They are flushed as before. Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/core: check length before updating Ethertype in skb_mpls_{push,pop}Guillaume Nault2020-10-141-2/+2
| | | | | | | | | | | | | | | | | | | | commit 4296adc3e32f5d544a95061160fe7e127be1b9ff upstream. Openvswitch allows to drop a packet's Ethernet header, therefore skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true and mac_len=0. In that case the pointer passed to skb_mod_eth_type() doesn't point to an Ethernet header and the new Ethertype is written at unexpected locations. Fix this by verifying that mac_len is big enough to contain an Ethernet header. Fixes: fa4e0f8855fc ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions") Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netlink: fix policy dump leakJohannes Berg2020-10-143-16/+20
| | | | | | | | | | | | | | commit a95bc734e60449e7b073ff7ff70c35083b290ae9 upstream. If userspace doesn't complete the policy dump, we leak the allocated state. Fix this. Fixes: d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: fix receive window update in tcp_add_backlog()Eric Dumazet2020-10-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 86bccd0367130f481ca99ba91de1c6a5aa1c78c1 upstream. We got reports from GKE customers flows being reset by netfilter conntrack unless nf_conntrack_tcp_be_liberal is set to 1. Traces seemed to suggest ACK packet being dropped by the packet capture, or more likely that ACK were received in the wrong order. wscale=7, SYN and SYNACK not shown here. This ACK allows the sender to send 1871*128 bytes from seq 51359321 : New right edge of the window -> 51359321+1871*128=51598809 09:17:23.389210 IP A > B: Flags [.], ack 51359321, win 1871, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389212 IP B > A: Flags [.], seq 51422681:51424089, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 1408 09:17:23.389214 IP A > B: Flags [.], ack 51422681, win 1376, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389253 IP B > A: Flags [.], seq 51424089:51488857, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 64768 09:17:23.389272 IP A > B: Flags [.], ack 51488857, win 859, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389275 IP B > A: Flags [.], seq 51488857:51521241, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384 Receiver now allows to send 606*128=77568 from seq 51521241 : New right edge of the window -> 51521241+606*128=51598809 09:17:23.389296 IP A > B: Flags [.], ack 51521241, win 606, options [nop,nop,TS val 10 ecr 999], length 0 09:17:23.389308 IP B > A: Flags [.], seq 51521241:51553625, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384 It seems the sender exceeds RWIN allowance, since 51611353 > 51598809 09:17:23.389346 IP B > A: Flags [.], seq 51553625:51611353, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 57728 09:17:23.389356 IP B > A: Flags [.], seq 51611353:51618393, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 7040 09:17:23.389367 IP A > B: Flags [.], ack 51611353, win 0, options [nop,nop,TS val 10 ecr 999], length 0 netfilter conntrack is not happy and sends RST 09:17:23.389389 IP A > B: Flags [R], seq 92176528, win 0, length 0 09:17:23.389488 IP B > A: Flags [R], seq 174478967, win 0, length 0 Now imagine ACK were delivered out of order and tcp_add_backlog() sets window based on wrong packet. New right edge of the window -> 51521241+859*128=51631193 Normally TCP stack handles OOO packets just fine, but it turns out tcp_add_backlog() does not. It can update the window field of the aggregated packet even if the ACK sequence of the last received packet is too old. Many thanks to Alexandre Ferrieux for independently reporting the issue and suggesting a fix. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected ↵Vijay Balakrishna2020-10-143-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | by khugepaged commit 4aab2be0983031a05cb4a19696c9da5749523426 upstream. When memory is hotplug added or removed the min_free_kbytes should be recalculated based on what is expected by khugepaged. Currently after hotplug, min_free_kbytes will be set to a lower default and higher default set when THP enabled is lost. This change restores min_free_kbytes as expected for THP consumers. [vijayb@linux.microsoft.com: v5] Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com Fixes: f000565adb77 ("thp: set recommended min free kbytes") Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Allen Pais <apais@microsoft.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Song Liu <songliubraving@fb.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mm: validate inode in mapping_set_error()Minchan Kim2020-10-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit 8b7b2eb131d3476062ffd34358785b44be25172f upstream. The swap address_space doesn't have host. Thus, it makes kernel crash once swap write meets error. Fix it. Fixes: 735e4ae5ba28 ("vfs: track per-sb writeback errors and report them to syncfs") Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Andres Freund <andres@anarazel.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201010000650.750063-1-minchan@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: core: don't set limits.discard_granularity as 0Coly Li2020-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4243219141b67d7c2fdb2d8073c17c539b9263eb ] In mmc_queue_setup_discard() the mmc driver queue's discard_granularity might be set as 0 (when card->pref_erase > max_discard) while the mmc device still declares to support discard operation. This is buggy and triggered the following kernel warning message, WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294 CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1 Hardware name: Google Kevin (DT) pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) pc : __blkdev_issue_discard+0x200/0x294 lr : __blkdev_issue_discard+0x54/0x294 sp : ffff800011dd3b10 x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace: __blkdev_issue_discard+0x200/0x294 __submit_discard_cmd+0x128/0x374 __issue_discard_cmd_orderly+0x188/0x244 __issue_discard_cmd+0x2e8/0x33c issue_discard_thread+0xe8/0x2f0 kthread+0x11c/0x120 ret_from_fork+0x10/0x1c ---[ end trace e4c8023d33dfe77a ]--- This patch fixes the issue by setting discard_granularity as SECTOR_SIZE instead of 0 when (card->pref_erase > max_discard) is true. Now no more complain from __blkdev_issue_discard() for the improper value of discard granularity. This issue is exposed after commit b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag is also added for the commit to make sure people won't miss this patch after applying the change of __blkdev_issue_discard(). Fixes: e056a1b5b67b ("mmc: queue: let host controllers specify maximum discard timeout") Fixes: b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"). Reported-and-tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* perf: Fix task_function_call() error handlingKajol Jain2020-10-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6d6b8b9f4fceab7266ca03d194f60ec72bd4b654 ] The error handling introduced by commit: 2ed6edd33a21 ("perf: Add cond_resched() to task_function_call()") looses any return value from smp_call_function_single() that is not {0, -EINVAL}. This is a problem because it will return -EXNIO when the target CPU is offline. Worse, in that case it'll turn into an infinite loop. Fixes: 2ed6edd33a21 ("perf: Add cond_resched() to task_function_call()") Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Barret Rhoden <brho@google.com> Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20200827064732.20860-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* afs: Fix deadlock between writeback and truncateDavid Howells2020-10-143-9/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ec0fa0b659144d9c68204d23f627b6a65fa53e50 ] The afs filesystem has a lock[*] that it uses to serialise I/O operations going to the server (vnode->io_lock), as the server will only perform one modification operation at a time on any given file or directory. This prevents the the filesystem from filling up all the call slots to a server with calls that aren't going to be executed in parallel anyway, thereby allowing operations on other files to obtain slots. [*] Note that is probably redundant for directories at least since i_rwsem is used to serialise directory modifications and lookup/reading vs modification. The server does allow parallel non-modification ops, however. When a file truncation op completes, we truncate the in-memory copy of the file to match - but we do it whilst still holding the io_lock, the idea being to prevent races with other operations. However, if writeback starts in a worker thread simultaneously with truncation (whilst notify_change() is called with i_rwsem locked, writeback pays it no heed), it may manage to set PG_writeback bits on the pages that will get truncated before afs_setattr_success() manages to call truncate_pagecache(). Truncate will then wait for those pages - whilst still inside io_lock: # cat /proc/8837/stack [<0>] wait_on_page_bit_common+0x184/0x1e7 [<0>] truncate_inode_pages_range+0x37f/0x3eb [<0>] truncate_pagecache+0x3c/0x53 [<0>] afs_setattr_success+0x4d/0x6e [<0>] afs_wait_for_operation+0xd8/0x169 [<0>] afs_do_sync_operation+0x16/0x1f [<0>] afs_setattr+0x1fb/0x25d [<0>] notify_change+0x2cf/0x3c4 [<0>] do_truncate+0x7f/0xb2 [<0>] do_sys_ftruncate+0xd1/0x104 [<0>] do_syscall_64+0x2d/0x3a [<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The writeback operation, however, stalls indefinitely because it needs to get the io_lock to proceed: # cat /proc/5940/stack [<0>] afs_get_io_locks+0x58/0x1ae [<0>] afs_begin_vnode_operation+0xc7/0xd1 [<0>] afs_store_data+0x1b2/0x2a3 [<0>] afs_write_back_from_locked_page+0x418/0x57c [<0>] afs_writepages_region+0x196/0x224 [<0>] afs_writepages+0x74/0x156 [<0>] do_writepages+0x2d/0x56 [<0>] __writeback_single_inode+0x84/0x207 [<0>] writeback_sb_inodes+0x238/0x3cf [<0>] __writeback_inodes_wb+0x68/0x9f [<0>] wb_writeback+0x145/0x26c [<0>] wb_do_writeback+0x16a/0x194 [<0>] wb_workfn+0x74/0x177 [<0>] process_one_work+0x174/0x264 [<0>] worker_thread+0x117/0x1b9 [<0>] kthread+0xec/0xf1 [<0>] ret_from_fork+0x1f/0x30 and thus deadlock has occurred. Note that whilst afs_setattr() calls filemap_write_and_wait(), the fact that the caller is holding i_rwsem doesn't preclude more pages being dirtied through an mmap'd region. Fix this by: (1) Use the vnode validate_lock to mediate access between afs_setattr() and afs_writepages(): (a) Exclusively lock validate_lock in afs_setattr() around the whole RPC operation. (b) If WB_SYNC_ALL isn't set on entry to afs_writepages(), trying to shared-lock validate_lock and returning immediately if we couldn't get it. (c) If WB_SYNC_ALL is set, wait for the lock. The validate_lock is also used to validate a file and to zap its cache if the file was altered by a third party, so it's probably a good fit for this. (2) Move the truncation outside of the io_lock in setattr, using the same hook as is used for local directory editing. This requires the old i_size to be retained in the operation record as we commit the revised status to the inode members inside the io_lock still, but we still need to know if we reduced the file size. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: mscc: ocelot: divide watermark value by 60 when writing to SYS_ATOPVladimir Oltean2020-10-141-6/+6
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 601e984f23abcaa7cf3eb078c13de4db3cf6a4f0 ] Tail dropping is enabled for a port when: 1. A source port consumes more packet buffers than the watermark encoded in SYS:PORT:ATOP_CFG.ATOP. AND 2. Total memory use exceeds the consumption watermark encoded in SYS:PAUSE_CFG:ATOP_TOT_CFG. The unit of these watermarks is a 60 byte memory cell. That unit is programmed properly into ATOP_TOT_CFG, but not into ATOP. Actually when written into ATOP, it would get truncated and wrap around. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: mscc: ocelot: extend watermark encoding functionMaxim Kochetkov2020-10-144-14/+29
| | | | | | | | | | | | | | | | [ Upstream commit aa92d836d5c40a7e21e563a272ad177f1bfd44dd ] The ocelot_wm_encode function deals with setting thresholds for pause frame start and stop. In Ocelot and Felix the register layout is the same, but for Seville, it isn't. The easiest way to accommodate Seville hardware configuration is to introduce a function pointer for setting this up. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: mscc: ocelot: split writes to pause frame enable bit and to thresholdsVladimir Oltean2020-10-141-7/+12
| | | | | | | | | | | | | | | | [ Upstream commit e8e6e73db14273464b374d49ca7242c0994945f3 ] We don't want ocelot_port_set_maxlen to enable pause frame TX, just to adjust the pause thresholds. Move the unconditional enabling of pause TX to ocelot_init_port. There is no good place to put such setting because it shouldn't be unconditional. But at the moment it is, we're not changing that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: mscc: ocelot: rename ocelot_board.c to ocelot_vsc7514.cVladimir Oltean2020-10-142-1/+1
| | | | | | | | | | | [ Upstream commit 589aa6e7c9de322d47eb33a5cee8cc38838319e6 ] To follow the model of felix and seville where we have one platform-specific file, rename this file to the actual SoC it serves. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Fix server keyring leakDavid Howells2020-10-141-1/+1
| | | | | | | | | | | | | [ Upstream commit 38b1dc47a35ba14c3f4472138ea56d014c2d609b ] If someone calls setsockopt() twice to set a server key keyring, the first keyring is leaked. Fix it to return an error instead if the server key keyring is already set. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: The server keyring isn't network-namespacedDavid Howells2020-10-141-1/+1
| | | | | | | | | | | | [ Upstream commit fea99111244bae44e7d82a973744d27ea1567814 ] The keyring containing the server's tokens isn't network-namespaced, so it shouldn't be looked up with a network namespace. It is expected to be owned specifically by the server, so namespacing is unnecessary. Fixes: a58946c158a0 ("keys: Pass the network namespace into request_key mechanism") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Fix some missing _bh annotations on locking conn->state_lockDavid Howells2020-10-141-3/+3
| | | | | | | | | | | | | | [ Upstream commit fa1d113a0f96f9ab7e4fe4f8825753ba1e34a9d3 ] conn->state_lock may be taken in softirq mode, but a previous patch replaced an outer lock in the response-packet event handling code, and lost the _bh from that when doing so. Fix this by applying the _bh annotation to the state_lock locking. Fixes: a1399f8bb033 ("rxrpc: Call channels should have separate call number spaces") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read()David Howells2020-10-141-2/+2
| | | | | | | | | | | | | | [ Upstream commit 9a059cd5ca7d9c5c4ca5a6e755cf72f230176b6a ] If rxrpc_read() (which allows KEYCTL_READ to read a key), sees a token of a type it doesn't recognise, it can BUG in a couple of places, which is unnecessary as it can easily get back to userspace. Fix this to print an error message instead. Fixes: 99455153d067 ("RxRPC: Parse security index 5 keys (Kerberos 5)") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Fix rxkad token xdr encodingMarc Dionne2020-10-141-2/+10
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 56305118e05b2db8d0395bba640ac9a3aee92624 ] The session key should be encoded with just the 8 data bytes and no length; ENCODE_DATA precedes it with a 4 byte length, which confuses some existing tools that try to parse this format. Add an ENCODE_BYTES macro that does not include a length, and use it for the key. Also adjust the expected length. Note that commit 774521f353e1d ("rxrpc: Fix an assertion in rxrpc_read()") had fixed a BUG by changing the length rather than fixing the encoding. The original length was correct. Fixes: 99455153d067 ("RxRPC: Parse security index 5 keys (Kerberos 5)") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: mvneta: fix double free of txq->bufTom Rix2020-10-141-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f4544e5361da5050ff5c0330ceea095cb5dbdd72 ] clang static analysis reports this problem: drivers/net/ethernet/marvell/mvneta.c:3465:2: warning: Attempt to free released memory kfree(txq->buf); ^~~~~~~~~~~~~~~ When mvneta_txq_sw_init() fails to alloc txq->tso_hdrs, it frees without poisoning txq->buf. The error is caught in the mvneta_setup_txqs() caller which handles the error by cleaning up all of the txqs with a call to mvneta_txq_sw_deinit which also frees txq->buf. Since mvneta_txq_sw_deinit is a general cleaner, all of the partial cleaning in mvneta_txq_sw_deinit()'s error handling is not needed. Fixes: 2adb719d74f6 ("net: mvneta: Implement software TSO") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* vhost-vdpa: fix page pinning leakage in error pathSi-Wei Liu2020-10-141-48/+71
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7ed9e3d97c32d969caded2dfb6e67c1a2cc5a0b1 ] Pinned pages are not properly accounted particularly when mapping error occurs on IOTLB update. Clean up dangling pinned pages for the error path. As the inflight pinned pages, specifically for memory region that strides across multiple chunks, would need more than one free page for book keeping and accounting. For simplicity, pin pages for all memory in the IOVA range in one go rather than have multiple pin_user_pages calls to make up the entire region. This way it's easier to track and account the pages already mapped, particularly for clean-up in the error path. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-3-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* vhost-vdpa: fix vhost_vdpa_map() on error conditionSi-Wei Liu2020-10-141-0/+3
| | | | | | | | | | | | | [ Upstream commit 1477c8aebb94a1db398c12d929a9d27bbd678d8c ] vhost_vdpa_map() should remove the iotlb entry just added if the corresponding mapping fails to set up properly. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-2-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: hinic: fix DEVLINK build errorsRandy Dunlap2020-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1f7e877c20517735bceff1535e1b7fa846b2f215 ] Fix many (lots deleted here) build errors in hinic by selecting NET_DEVLINK. ld: drivers/net/ethernet/huawei/hinic/hinic_hw_dev.o: in function `mgmt_watchdog_timeout_event_handler': hinic_hw_dev.c:(.text+0x30a): undefined reference to `devlink_health_report' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump': hinic_devlink.c:(.text+0x1c): undefined reference to `devlink_fmsg_u32_pair_put' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump': hinic_devlink.c:(.text+0x126): undefined reference to `devlink_fmsg_binary_pair_put' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_hw_reporter_dump': hinic_devlink.c:(.text+0x1ba): undefined reference to `devlink_fmsg_string_pair_put' ld: hinic_devlink.c:(.text+0x227): undefined reference to `devlink_fmsg_u8_pair_put' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_alloc': hinic_devlink.c:(.text+0xaee): undefined reference to `devlink_alloc' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_free': hinic_devlink.c:(.text+0xb04): undefined reference to `devlink_free' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_register': hinic_devlink.c:(.text+0xb26): undefined reference to `devlink_register' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_unregister': hinic_devlink.c:(.text+0xb46): undefined reference to `devlink_unregister' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_create': hinic_devlink.c:(.text+0xb75): undefined reference to `devlink_health_reporter_create' ld: hinic_devlink.c:(.text+0xb95): undefined reference to `devlink_health_reporter_create' ld: hinic_devlink.c:(.text+0xbac): undefined reference to `devlink_health_reporter_destroy' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_destroy': Fixes: 51ba902a16e6 ("net-next/hinic: Initialize hw interface") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bin Luo <luobin9@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com> Cc: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: stmmac: Modify configuration method of EEE timersVineetha G. Jaya Kumaran2020-10-143-9/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 388e201d41fa1ed8f2dce0f0567f56f8e919ffb0 ] Ethtool manual stated that the tx-timer is the "the amount of time the device should stay in idle mode prior to asserting its Tx LPI". The previous implementation for "ethtool --set-eee tx-timer" sets the LPI TW timer duration which is not correct. Hence, this patch fixes the "ethtool --set-eee tx-timer" to configure the EEE LPI timer. The LPI TW Timer will be using the defined default value instead of "ethtool --set-eee tx-timer" which follows the EEE LS timer implementation. Changelog V2 *Not removing/modifying the eee_timer. *EEE LPI timer can be configured through ethtool and also the eee_timer module param. *EEE TW Timer will be configured with default value only, not able to be configured through ethtool or module param. This follows the implementation of the EEE LS Timer. Fixes: d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Fix race condition on nhe->n pointer in neigh updateVlad Buslov2020-10-142-37/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1253935ad801485270194d5651acab04abc97b36 ] Current neigh update event handler implementation takes reference to neighbour structure, assigns it to nhe->n, tries to schedule workqueue task and releases the reference if task was already enqueued. This results potentially overwriting existing nhe->n pointer with another neighbour instance, which causes double release of the instance (once in neigh update handler that failed to enqueue to workqueue and another one in neigh update workqueue task that processes updated nhe->n pointer instead of original one): [ 3376.512806] ------------[ cut here ]------------ [ 3376.513534] refcount_t: underflow; use-after-free. [ 3376.521213] Modules linked in: act_skbedit act_mirred act_tunnel_key vxlan ip6_udp_tunnel udp_tunnel nfnetlink act_gact cls_flower sch_ingress openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mlx5_ib mlx5_core mlxfw pci_hyperv_intf ptp pps_core nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp rpcrdma rdma_ucm ib_umad ib_ipoib ib_iser rdma_cm ib_cm iw_cm rfkill ib_uverbs ib_core sunrpc kvm_intel kvm iTCO_wdt iTCO_vendor_support virtio_net irqbypass net_failover crc32_pclmul lpc_ich i2c_i801 failover pcspkr i2c_smbus mfd_core ghash_clmulni_intel sch_fq_codel drm i2c _core ip_tables crc32c_intel serio_raw [last unloaded: mlxfw] [ 3376.529468] CPU: 8 PID: 22756 Comm: kworker/u20:5 Not tainted 5.9.0-rc5+ #6 [ 3376.530399] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 3376.531975] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [ 3376.532820] RIP: 0010:refcount_warn_saturate+0xd8/0xe0 [ 3376.533589] Code: ff 48 c7 c7 e0 b8 27 82 c6 05 0b b6 09 01 01 e8 94 93 c1 ff 0f 0b c3 48 c7 c7 88 b8 27 82 c6 05 f7 b5 09 01 01 e8 7e 93 c1 ff <0f> 0b c3 0f 1f 44 00 00 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 [ 3376.536017] RSP: 0018:ffffc90002a97e30 EFLAGS: 00010286 [ 3376.536793] RAX: 0000000000000000 RBX: ffff8882de30d648 RCX: 0000000000000000 [ 3376.537718] RDX: ffff8882f5c28f20 RSI: ffff8882f5c18e40 RDI: ffff8882f5c18e40 [ 3376.538654] RBP: ffff8882cdf56c00 R08: 000000000000c580 R09: 0000000000001a4d [ 3376.539582] R10: 0000000000000731 R11: ffffc90002a97ccd R12: 0000000000000000 [ 3376.540519] R13: ffff8882de30d600 R14: ffff8882de30d640 R15: ffff88821e000900 [ 3376.541444] FS: 0000000000000000(0000) GS:ffff8882f5c00000(0000) knlGS:0000000000000000 [ 3376.542732] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3376.543545] CR2: 0000556e5504b248 CR3: 00000002c6f10005 CR4: 0000000000770ee0 [ 3376.544483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3376.545419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3376.546344] PKRU: 55555554 [ 3376.546911] Call Trace: [ 3376.547479] mlx5e_rep_neigh_update.cold+0x33/0xe2 [mlx5_core] [ 3376.548299] process_one_work+0x1d8/0x390 [ 3376.548977] worker_thread+0x4d/0x3e0 [ 3376.549631] ? rescuer_thread+0x3e0/0x3e0 [ 3376.550295] kthread+0x118/0x130 [ 3376.550914] ? kthread_create_worker_on_cpu+0x70/0x70 [ 3376.551675] ret_from_fork+0x1f/0x30 [ 3376.552312] ---[ end trace d84e8f46d2a77eec ]--- Fix the bug by moving work_struct to dedicated dynamically-allocated structure. This enabled every event handler to work on its own private neighbour pointer and removes the need for handling the case when task is already enqueued. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Fix VLAN create flowAya Levin2020-10-141-2/+4
| | | | | | | | | | | | | | | | | | | | [ Upstream commit d4a16052bccdd695982f89d815ca075825115821 ] When interface is attached while in promiscuous mode and with VLAN filtering turned off, both configurations are not respected and VLAN filtering is performed. There are 2 flows which add the any-vid rules during interface attach: VLAN creation table and set rx mode. Each is relaying on the other to add any-vid rules, eventually non of them does. Fix this by adding any-vid rules on VLAN creation regardless of promiscuous mode. Fixes: 9df30601c843 ("net/mlx5e: Restore vlan filter after seamless reset") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Fix VLAN cleanup flowAya Levin2020-10-141-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8c7353b6f716436ad0bfda2b5c5524ab2dde5894 ] Prior to this patch unloading an interface in promiscuous mode with RX VLAN filtering feature turned off - resulted in a warning. This is due to a wrong condition in the VLAN rules cleanup flow, which left the any-vid rules in the VLAN steering table. These rules prevented destroying the flow group and the flow table. The any-vid rules are removed in 2 flows, but none of them remove it in case both promiscuous is set and VLAN filtering is off. Fix the issue by changing the condition of the VLAN table cleanup flow to clean also in case of promiscuous mode. mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 20 wasn't destroyed, refcount > 1 mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 19 wasn't destroyed, refcount > 1 mlx5_core 0000:00:08.0: mlx5_destroy_flow_table:2112:(pid 28729): Flow table 262149 wasn't destroyed, refcount > 1 ... ... ------------[ cut here ]------------ FW pages counter is 11560 after reclaiming all pages WARNING: CPU: 1 PID: 28729 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:660 mlx5_reclaim_startup_pages+0x178/0x230 [mlx5_core] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: mlx5_function_teardown+0x2f/0x90 [mlx5_core] mlx5_unload_one+0x71/0x110 [mlx5_core] remove_one+0x44/0x80 [mlx5_core] pci_device_remove+0x3e/0xc0 device_release_driver_internal+0xfb/0x1c0 device_release_driver+0x12/0x20 pci_stop_bus_device+0x68/0x90 pci_stop_and_remove_bus_device+0x12/0x20 hv_eject_device_work+0x6f/0x170 [pci_hyperv] ? __schedule+0x349/0x790 process_one_work+0x206/0x400 worker_thread+0x34/0x3f0 ? process_one_work+0x400/0x400 kthread+0x126/0x140 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 ---[ end trace 6283bde8d26170dc ]--- Fixes: 9df30601c843 ("net/mlx5e: Restore vlan filter after seamless reset") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Fix return status when setting unsupported FEC modeAya Levin2020-10-141-0/+3
| | | | | | | | | | | | | | | | | | | [ Upstream commit 2608a2f831c47dfdf18885a7289be5af97182b05 ] Verify the configured FEC mode is supported by at least a single link mode before applying the command. Otherwise fail the command and return "Operation not supported". Prior to this patch, the command was successful, yet it falsely set all link modes to FEC auto mode - like configuring FEC mode to auto. Auto mode is the default configuration if a link mode doesn't support the configured FEC mode. Fixes: b5ede32d3329 ("net/mlx5e: Add support for FEC modes based on 50G per lane links") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTUAya Levin2020-10-142-5/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c3c9402373fe20e2d08c04f437ce4dcd252cffb2 ] Prior to this fix, in Striding RQ mode the driver was vulnerable when receiving packets in the range (stride size - headroom, stride size]. Where stride size is calculated by mtu+headroom+tailroom aligned to the closest power of 2. Usually, this filtering is performed by the HW, except for a few cases: - Between 2 VFs over the same PF with different MTUs - On bluefield, when the host physical function sets a larger MTU than the ARM has configured on its representor and uplink representor. When the HW filtering is not present, packets that are larger than MTU might be harmful for the RQ's integrity, in the following impacts: 1) Overflow from one WQE to the next, causing a memory corruption that in most cases is unharmful: as the write happens to the headroom of next packet, which will be overwritten by build_skb(). In very rare cases, high stress/load, this is harmful. When the next WQE is not yet reposted and points to existing SKB head. 2) Each oversize packet overflows to the headroom of the next WQE. On the last WQE of the WQ, where addresses wrap-around, the address of the remainder headroom does not belong to the next WQE, but it is out of the memory region range. This results in a HW CQE error that moves the RQ into an error state. Solution: Add a page buffer at the end of each WQE to absorb the leak. Actually the maximal overflow size is headroom but since all memory units must be of the same size, we use page size to comply with UMR WQEs. The increase in memory consumption is of a single page per RQ. Initialize the mkey with all MTTs pointing to a default page. When the channels are activated, UMR WQEs will redirect the RX WQEs to the actual memory from the RQ's pool, while the overflow MTTs remain mapped to the default page. Fixes: 73281b78a37a ("net/mlx5e: Derive Striding RQ size from MTU") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: Fix request_irqs error flowMaor Gottlieb2020-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 732ebfab7fe96b7ac9a3df3208f14752a4bb6db3 ] Fix error flow handling in request_irqs which try to free irq that we failed to request. It fixes the below trace. WARNING: CPU: 1 PID: 7587 at kernel/irq/manage.c:1684 free_irq+0x4d/0x60 CPU: 1 PID: 7587 Comm: bash Tainted: G W OE 4.15.15-1.el7MELLANOXsmp-x86_64 #1 Hardware name: Advantech SKY-6200/SKY-6200, BIOS F2.00 08/06/2020 RIP: 0010:free_irq+0x4d/0x60 RSP: 0018:ffffc9000ef47af0 EFLAGS: 00010282 RAX: ffff88001476ae00 RBX: 0000000000000655 RCX: 0000000000000000 RDX: ffff88001476ae00 RSI: ffffc9000ef47ab8 RDI: ffff8800398bb478 RBP: ffff88001476a838 R08: ffff88001476ae00 R09: 000000000000156d R10: 0000000000000000 R11: 0000000000000004 R12: ffff88001476a838 R13: 0000000000000006 R14: ffff88001476a888 R15: 00000000ffffffe4 FS: 00007efeadd32740(0000) GS:ffff88047fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc9cc010008 CR3: 00000001a2380004 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: mlx5_irq_table_create+0x38d/0x400 [mlx5_core] ? atomic_notifier_chain_register+0x50/0x60 mlx5_load_one+0x7ee/0x1130 [mlx5_core] init_one+0x4c9/0x650 [mlx5_core] pci_device_probe+0xb8/0x120 driver_probe_device+0x2a1/0x470 ? driver_allows_async_probing+0x30/0x30 bus_for_each_drv+0x54/0x80 __device_attach+0xa3/0x100 pci_bus_add_device+0x4a/0x90 pci_iov_add_virtfn+0x2dc/0x2f0 pci_enable_sriov+0x32e/0x420 mlx5_core_sriov_configure+0x61/0x1b0 [mlx5_core] ? kstrtoll+0x22/0x70 num_vf_store+0x4b/0x70 [mlx5_core] kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x140 ? rcu_all_qs+0x5/0x80 ? _cond_resched+0x15/0x30 ? __sb_start_write+0x41/0x80 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x60/0x110 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 24163189da48 ("net/mlx5: Separate IRQ request/free from EQ life cycle") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: Add retry mechanism to the command entry index allocationEran Ben Elisha2020-10-141-1/+20
| | | | | | | | | | | | | | | | | | | [ Upstream commit 410bd754cd73c4a2ac3856d9a03d7b08f9c906bf ] It is possible that new command entry index allocation will temporarily fail. The new command holds the semaphore, so it means that a free entry should be ready soon. Add one second retry mechanism before returning an error. Patch "net/mlx5: Avoid possible free of command entry while timeout comp handler" increase the possibility to bump into this temporarily failure as it delays the entry index release for non-callback commands. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: poll cmd EQ in case of command timeoutEran Ben Elisha2020-10-143-9/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1d5558b1f0de81f54ddee05f3793acc5260d107f ] Once driver detects a command interface command timeout, it warns the user and returns timeout error to the caller. In such case, the entry of the command is not evacuated (because only real event interrupt is allowed to clear command interface entry). If the HW event interrupt of this entry will never arrive, this entry will be left unused forever. Command interface entries are limited and eventually we can end up without the ability to post a new command. In addition, if driver will not consume the EQE of the lost interrupt and rearm the EQ, no new interrupts will arrive for other commands. Add a resiliency mechanism for manually polling the command EQ in case of a command timeout. In case resiliency mechanism will find non-handled EQE, it will consume it, and the command interface will be fully functional again. Once the resiliency flow finished, wait another 5 seconds for the command interface to complete for this command entry. Define mlx5_cmd_eq_recover() to manage the cmd EQ polling resiliency flow. Add an async EQ spinlock to avoid races between resiliency flows and real interrupts that might run simultaneously. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: Avoid possible free of command entry while timeout comp handlerEran Ben Elisha2020-10-142-38/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 50b2412b7e7862c5af0cbf4b10d93bc5c712d021 ] Upon command completion timeout, driver simulates a forced command completion. In a rare case where real interrupt for that command arrives simultaneously, it might release the command entry while the forced handler might still access it. Fix that by adding an entry refcount, to track current amount of allowed handlers. Command entry to be released only when this refcount is decremented to zero. Command refcount is always initialized to one. For callback commands, command completion handler is the symmetric flow to decrement it. For non-callback commands, it is wait_func(). Before ringing the doorbell, increment the refcount for the real completion handler. Once the real completion handler is called, it will decrement it. For callback commands, once the delayed work is scheduled, increment the refcount. Upon callback command completion handler, we will try to cancel the timeout callback. In case of success, we need to decrement the callback refcount as it will never run. In addition, gather the entry index free and the entry free into a one flow for all command types release. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/mlx5: Fix a race when moving command interface to polling modeEran Ben Elisha2020-10-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 432161ea26d6d5e5c3f7306d9407d26ed1e1953e ] As part of driver unload, it destroys the commands EQ (via FW command). As the commands EQ is destroyed, FW will not generate EQEs for any command that driver sends afterwards. Driver should poll for later commands status. Driver commands mode metadata is updated before the commands EQ is actually destroyed. This can lead for double completion handle by the driver (polling and interrupt), if a command is executed and completed by FW after the mode was changed, but before the EQ was destroyed. Fix that by using the mlx5_cmd_allowed_opcode mechanism to guarantee that only DESTROY_EQ command can be executed during this time period. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* pipe: Fix memory leaks in create_pipe_files()Qian Cai2020-10-142-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8a018eb55e3ac033592afbcb476b0ffe64465b12 ] Calling pipe2() with O_NOTIFICATION_PIPE could results in memory leaks unless watch_queue_init() is successful. In case of watch_queue_init() failure in pipe2() we are left with inode and pipe_inode_info instances that need to be freed. That failure exit has been introduced in commit c73be61cede5 ("pipe: Add general notification queue support") and its handling should've been identical to nearby treatment of alloc_file_pseudo() failures - it is dealing with the same situation. As it is, the mainline kernel leaks in that case. Another problem is that CONFIG_WATCH_QUEUE and !CONFIG_WATCH_QUEUE cases are treated differently (and the former leaks just pipe_inode_info, the latter - both pipe_inode_info and inode). Fixed by providing a dummy wacth_queue_init() in !CONFIG_WATCH_QUEUE case and by having failures of wacth_queue_init() handled the same way we handle alloc_file_pseudo() ones. Fixes: c73be61cede5 ("pipe: Add general notification queue support") Signed-off-by: Qian Cai <cai@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* octeontx2-pf: Fix synchnorization issue in mboxHariprasad Kelam2020-10-144-9/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 66a5209b53418111757716d71e52727b782eabd4 ] Mbox implementation in octeontx2 driver has three states alloc, send and reset in mbox response. VF allocate and sends message to PF for processing, PF ACKs them back and reset the mbox memory. In some case we see synchronization issue where after msgs_acked is incremented and before mbox_reset API is called, if current execution is scheduled out and a different thread is scheduled in which checks for msgs_acked. Since the new thread sees msgs_acked == msgs_sent it will try to allocate a new message and to send a new mbox message to PF.Now if mbox_reset is scheduled in, PF will see '0' in msgs_send. This patch fixes the issue by calling mbox_reset before incrementing msgs_acked flag for last processing message and checks for valid message size. Fixes: d424b6c02 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* octeontx2-pf: Fix the device state on errorHariprasad Kelam2020-10-141-1/+4
| | | | | | | | | | | | | | | | | [ Upstream commit 1ea0166da0509e987caa42c30a6a71f2c6ca1875 ] Currently in otx2_open on failure of nix_lf_start transmit queues are not stopped which are already started in link_event. Since the tx queues are not stopped network stack still try's to send the packets leading to driver crash while access the device resources. Fixes: 50fe6c02e ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* octeontx2-pf: Fix TCP/UDP checksum offload for IPv6 framesGeetha sowjanya2020-10-141-0/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 89eae5e87b4fa799726a3e8911c90d418cb5d2b1 ] For TCP/UDP checksum offload feature in Octeontx2 expects L3TYPE to be set irrespective of IP header checksum is being offloaded or not. Currently for IPv6 frames L3TYPE is not being set resulting in packet drop with checksum error. This patch fixes this issue. Fixes: 3ca6c4c88 ("octeontx2-pf: Add packet transmission support") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* octeontx2-af: Fix enable/disable of default NPC entriesSubbaraya Sundeep2020-10-143-11/+23
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e154b5b70368a84a19505a0be9b0096c66562b56 ] Packet replication feature present in Octeontx2 is a hardware linked list of PF and its VF interfaces so that broadcast packets are sent to all interfaces present in the list. It is driver job to add and delete a PF/VF interface to/from the list when the interface is brought up and down. This patch fixes the npc_enadis_default_entries function to handle broadcast replication properly if packet replication feature is present. Fixes: 40df309e4166 ("octeontx2-af: Support to enable/disable default MCAM entries") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: phy: realtek: fix rtl8211e rx/tx delay configWilly Liu2020-10-141-15/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit bbc4d71d63549bcd003a430de18a72a742d8c91e ] There are two chip pins named TXDLY and RXDLY which actually adds the 2ns delays to TXC and RXC for TXD/RXD latching. These two pins can config via 4.7k-ohm resistor to 3.3V hw setting, but also config via software setting (extension page 0xa4 register 0x1c bit13 12 and 11). The configuration register definitions from table 13 official PHY datasheet: PHYAD[2:0] = PHY Address AN[1:0] = Auto-Negotiation Mode = Interface Mode Select RX Delay = RX Delay TX Delay = TX Delay SELRGV = RGMII/GMII Selection This table describes how to config these hw pins via external pull-high or pull- low resistor. It is a misunderstanding that mapping it as register bits below: 8:6 = PHY Address 5:4 = Auto-Negotiation 3 = Interface Mode Select 2 = RX Delay 1 = TX Delay 0 = SELRGV So I removed these descriptions above and add related settings as below: 14 = reserved 13 = force Tx RX Delay controlled by bit12 bit11 12 = Tx Delay 11 = Rx Delay 10:0 = Test && debug settings reserved by realtek Test && debug settings are not recommend to modify by default. Fixes: f81dadbcf7fd ("net: phy: realtek: Add rtl8211e rx/tx delays config") Signed-off-by: Willy Liu <willy.liu@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* virtio-net: don't disable guest csum when disable LROTonghao Zhang2020-10-141-1/+7
| | | | | | | | | | | | | | | | | [ Upstream commit 1a03b8a35a957f9f38ecb8a97443b7380bbf6a8b ] Open vSwitch and Linux bridge will disable LRO of the interface when this interface added to them. Now when disable the LRO, the virtio-net csum is disable too. That drops the forwarding performance. Fixes: a02e8964eaf9 ("virtio-net: ethtool configurable LRO") Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: usb: ax88179_178a: fix missing stop entry in driver_infoWilken Gottwalt2020-10-141-0/+1
| | | | | | | | | | | [ Upstream commit 9666ea66a74adfe295cb3a8760c76e1ef70f9caf ] Adds the missing .stop entry in the Belkin driver_info structure. Fixes: e20bd60bf62a ("net: usb: asix88179_178a: Add support for the Belkin B2B128") Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-31 00:48:05 +0000