summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ARM: decompressor: move GOT into .data for EFI enabled buildsArd Biesheuvel2020-05-191-0/+5
| | | | | | | | | | | | | We will be running the decompressor in place after a future patch, instead of copying it around first. This means we no longer have to disable and re-enable the MMU and caches either. However, this means we will be loaded with the restricted permissions set by the UEFI firmware, which means that we have to move the GOT table into the data section in order for the contents to be writable by the code itself. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
* ARM: decompressor: defer loading of the contents of the LC0 structureArd Biesheuvel2020-05-191-11/+4
| | | | | | | | | | | | | The remaining contents of LC0 are only used after the point in the decompressor startup code where we enter via 'wont_overwrite'. So move the loading of the LC0 structure after it. This will allow us to jump to wont_overwrite directly from the EFI stub, and execute the decompressor in place at the offset it was loaded by the UEFI firmware. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
* ARM: decompressor: split off _edata and stack base into separate objectArd Biesheuvel2020-05-191-11/+12
| | | | | | | | | | | In preparation of moving the handling of the LC0 object to a later stage in the decompressor startup code, move out _edata and the initial value of the stack pointer, which are needed earlier than the remaining contents of LC0. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
* ARM: decompressor: move headroom variable out of LC0Ard Biesheuvel2020-05-191-2/+4
| | | | | | | | | | | Before breaking up LC0 into different pieces, move out the variable that is already place-relative (given that it subtracts 'restart' in the expression) and so its value does not need to be added to the runtime address of the LC0 symbol itself. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
* ARM: 8971/1: replace the sole use of a symbol with its definitionJian Cai2020-04-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | ALT_UP_B macro sets symbol up_b_offset via .equ to an expression involving another symbol. The macro gets expanded twice when arch/arm/kernel/sleep.S is assembled, creating a scenario where up_b_offset is set to another expression involving symbols while its current value is based on symbols. LLVM integrated assembler does not allow such cases, and based on the documentation of binutils, "Values that are based on expressions involving other symbols are allowed, but some targets may restrict this to only being done once per assembly", so it may be better to avoid such cases as it is not clearly stated which targets should support or disallow them. The fix in this case is simple, as up_b_offset has only one use, so we can replace the use with the definition and get rid of up_b_offset. Link:https://github.com/ClangBuiltLinux/linux/issues/920 Reviewed-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Jian Cai <caij2003@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* ARM: 8969/1: decompressor: simplify libfdt buildsMasahiro Yamada2020-04-298-56/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copying source files during the build time may not end up with as clean code as expected. lib/fdt*.c simply wrap scripts/dtc/libfdt/fdt*.c, and it works nicely. Let's follow this approach for the arm decompressor, too. Add four wrappers, arch/arm/boot/compressed/fdt*.c and remove the Makefile messes. Another nice thing is we no longer need to maintain the own libfdt_env.h because the decompressor can include <linux/libfdt_env.h>. There is a subtle problem when generated files are turned into check-in files. When you are doing a rebuild of an existing object tree with O= option, there exists stale "shipped" copies that the old Makefile implementation created. The build system ends up with compiling the stale generated files because Make searches for prerequisites in the current directory, i.e. $(objtree) first, and then the directory listed in VPATH, i.e. $(srctree). To mend this issue, I added the following code: ifdef building_out_of_srctree $(shell rm -f $(addprefix $(obj)/, fdt_rw.c fdt_ro.c fdt_wip.c fdt.c)) endif This will need to stay for a while because "git bisect" crossing this commit, otherwise, would result in a build error. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* Update rmk's email address in various driversRussell King2020-04-216-6/+6
| | | | | | | | | Globally update my email address in six files scattered through the tree. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* ARM: compat: remove KERNEL_DS usage in sys_oabi_epoll_ctl()Russell King2020-04-211-10/+5
| | | | | | | | We no longer need to switch to KERNEL_DS mode in sys_oabi_epoll_ctl() as we can use do_epoll_ctl() to avoid the additional copy. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* Linux 5.7-rc1v5.7-rc1Linus Torvalds2020-04-121-2/+2
|
* MAINTAINERS: sort field names for all entriesLinus Torvalds2020-04-121-1974/+1974
| | | | | | | | | | | | | | | This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MAINTAINERS: sort entries by entry nameLinus Torvalds2020-04-121-820/+820
| | | | | | | | | | | | | | | | | | | | | They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'x86-urgent-2020-04-12' of ↵Linus Torvalds2020-04-124-9/+79
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of three patches to fix the fallout of the newly added split lock detection feature. It addressed the case where a KVM guest triggers a split lock #AC and KVM reinjects it into the guest which is not prepared to handle it. Add proper sanity checks which prevent the unconditional injection into the guest and handles the #AC on the host side in the same way as user space detections are handled. Depending on the detection mode it either warns and disables detection for the task or kills the task if the mode is set to fatal" * tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest KVM: x86: Emulate split-lock access as a write in emulator x86/split_lock: Provide handle_guest_split_lock()
| * KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guestXiaoyao Li2020-04-111-3/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two types of #AC can be generated in Intel CPUs: 1. legacy alignment check #AC 2. split lock #AC Reflect #AC back into the guest if the guest has legacy alignment checks enabled or if split lock detection is disabled. If the #AC is not a legacy one and split lock detection is enabled, then invoke handle_guest_split_lock() which will either warn and disable split lock detection for this task or force SIGBUS on it. [ tglx: Switch it to handle_guest_split_lock() and rename the misnamed helper function. ] Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.176308876@linutronix.de
| * KVM: x86: Emulate split-lock access as a write in emulatorXiaoyao Li2020-04-111-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emulate split-lock accesses as writes if split lock detection is on to avoid #AC during emulation, which will result in a panic(). This should never occur for a well-behaved guest, but a malicious guest can manipulate the TLB to trigger emulation of a locked instruction[1]. More discussion can be found at [2][3]. [1] https://lkml.kernel.org/r/8c5b11c9-58df-38e7-a514-dc12d687b198@redhat.com [2] https://lkml.kernel.org/r/20200131200134.GD18946@linux.intel.com [3] https://lkml.kernel.org/r/20200227001117.GX9940@linux.intel.com Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115517.084300242@linutronix.de
| * x86/split_lock: Provide handle_guest_split_lock()Thomas Gleixner2020-04-112-5/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without at least minimal handling for split lock detection induced #AC, VMX will just run into the same problem as the VMWare hypervisor, which was reported by Kenneth. It will inject the #AC blindly into the guest whether the guest is prepared or not. Provide a function for guest mode which acts depending on the host SLD mode. If mode == sld_warn, treat it like user space, i.e. emit a warning, disable SLD and mark the task accordingly. Otherwise force SIGBUS. [ bp: Add a !CPU_SUP_INTEL stub for handle_guest_split_lock(). ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/r/20200410115516.978037132@linutronix.de Link: https://lkml.kernel.org/r/20200402123258.895628824@linutronix.de
* | Merge tag 'timers-urgent-2020-04-12' of ↵Linus Torvalds2020-04-123-0/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time(keeping) updates from Thomas Gleixner: - Fix the time_for_children symlink in /proc/$PID/ so it properly reflects that it part of the 'time' namespace - Add the missing userns limit for the allowed number of time namespaces, which was half defined but the actual array member was not added. This went unnoticed as the array has an exessive empty member at the end but introduced a user visible regression as the output was corrupted. - Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to catch half updated data. * tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ucount: Make sure ucounts in /proc/sys/user don't regress again time/namespace: Add max_time_namespaces ucount time/namespace: Fix time_for_children symlink
| * | ucount: Make sure ucounts in /proc/sys/user don't regress againJan Kara2020-04-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 769071ac9f20 "ns: Introduce Time Namespace" broke reporting of inotify ucounts (max_inotify_instances, max_inotify_watches) in /proc/sys/user because it has added UCOUNT_TIME_NAMESPACES into enum ucount_type but didn't properly update reporting in kernel/ucount.c:setup_userns_sysctls(). This problem got fixed in commit eeec26d5da82 "time/namespace: Add max_time_namespaces ucount". Add BUILD_BUG_ON to catch a similar problem in the future. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andrei Vagin <avagin@gmail.com> Link: https://lkml.kernel.org/r/20200407154643.10102-1-jack@suse.cz
| * | time/namespace: Add max_time_namespaces ucountDmitry Safonov2020-04-072-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Michael noticed that userns limit for number of time namespaces is missing. Furthermore, time namespace introduced UCOUNT_TIME_NAMESPACES, but didn't introduce an array member in user_table[]. It would make array's initialisation OOB write, but by luck the user_table array has an excessive empty member (all accesses to the array are limited with UCOUNT_COUNTS - so it silently reuses the last free member. Fixes user-visible regression: max_inotify_instances by reason of the missing UCOUNT_ENTRY() has limited max number of namespaces instead of the number of inotify instances. Fixes: 769071ac9f20 ("ns: Introduce Time Namespace") Reported-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andrei Vagin <avagin@gmail.com> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20200406171342.128733-1-dima@arista.com
| * | time/namespace: Fix time_for_children symlinkMichael Kerrisk (man-pages)2020-04-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looking at the contents of the /proc/PID/ns/time_for_children symlink shows an anomaly: $ ls -l /proc/self/ns/* |awk '{print $9, $10, $11}' ... /proc/self/ns/pid -> pid:[4026531836] /proc/self/ns/pid_for_children -> pid:[4026531836] /proc/self/ns/time -> time:[4026531834] /proc/self/ns/time_for_children -> time_for_children:[4026531834] /proc/self/ns/user -> user:[4026531837] ... The reference for 'time_for_children' should be a 'time' namespace, just as the reference for 'pid_for_children' is a 'pid' namespace. In other words, the above time_for_children link should read: /proc/self/ns/time_for_children -> time:[4026531834] Fixes: 769071ac9f20 ("ns: Introduce Time Namespace") Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Dmitry Safonov <dima@arista.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Andrei Vagin <avagin@gmail.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/a2418c48-ed80-3afe-116e-6611cb799557@gmail.com
* | | Merge tag 'sched-urgent-2020-04-12' of ↵Linus Torvalds2020-04-125-62/+51
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes/updates from Thomas Gleixner: - Deduplicate the average computations in the scheduler core and the fair class code. - Fix a raise between runtime distribution and assignement which can cause exceeding the quota by up to 70%. - Prevent negative results in the imbalanace calculation - Remove a stale warning in the workqueue code which can be triggered since the call site was moved out of preempt disabled code. It's a false positive. - Deduplicate the print macros for procfs - Add the ucmap values to the SCHED_DEBUG procfs output for completness * tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add task uclamp values to SCHED_DEBUG procfs sched/debug: Factor out printing formats into common macros sched/debug: Remove redundant macro define sched/core: Remove unused rq::last_load_update_tick workqueue: Remove the warning in wq_worker_sleeping() sched/fair: Fix negative imbalance in imbalance calculation sched/fair: Fix race between runtime distribution and assignment sched/fair: Align rq->avg_idle and rq->avg_scan_cost
| * | | sched/debug: Add task uclamp values to SCHED_DEBUG procfsValentin Schneider2020-04-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Requested and effective uclamp values can be a bit tricky to decipher when playing with cgroup hierarchies. Add them to a task's procfs when SCHED_DEBUG is enabled. Reviewed-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200226124543.31986-4-valentin.schneider@arm.com
| * | | sched/debug: Factor out printing formats into common macrosValentin Schneider2020-04-081-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The printing macros in debug.c keep redefining the same output format. Collect each output format in a single definition, and reuse that definition in the other macros. While at it, add a layer of parentheses and replace printf's with the newly introduced macros. Reviewed-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200226124543.31986-3-valentin.schneider@arm.com
| * | | sched/debug: Remove redundant macro defineValentin Schneider2020-04-081-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most printing macros for procfs are defined globally in debug.c, and they are re-defined (to the exact same thing) within proc_sched_show_task(). Get rid of the duplicate defines. Reviewed-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200226124543.31986-2-valentin.schneider@arm.com
| * | | sched/core: Remove unused rq::last_load_update_tickVincent Donnefort2020-04-082-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit: 5e83eafbfd3b ("sched/fair: Remove the rq->cpu_load[] update code") eliminated the last use case for rq->last_load_update_tick, so remove the field as well. Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/1584710495-308969-1-git-send-email-vincent.donnefort@arm.com
| * | | workqueue: Remove the warning in wq_worker_sleeping()Sebastian Andrzej Siewior2020-04-082-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel test robot triggered a warning with the following race: task-ctx A interrupt-ctx B worker -> process_one_work() -> work_item() -> schedule(); -> sched_submit_work() -> wq_worker_sleeping() -> ->sleeping = 1 atomic_dec_and_test(nr_running) __schedule(); *interrupt* async_page_fault() -> local_irq_enable(); -> schedule(); -> sched_submit_work() -> wq_worker_sleeping() -> if (WARN_ON(->sleeping)) return -> __schedule() -> sched_update_worker() -> wq_worker_running() -> atomic_inc(nr_running); -> ->sleeping = 0; -> sched_update_worker() -> wq_worker_running() if (!->sleeping) return In this context the warning is pointless everything is fine. An interrupt before wq_worker_sleeping() will perform the ->sleeping assignment (0 -> 1 > 0) twice. An interrupt after wq_worker_sleeping() will trigger the warning and nr_running will be decremented (by A) and incremented once (only by B, A will skip it). This is the case until the ->sleeping is zeroed again in wq_worker_running(). Remove the WARN statement because this condition may happen. Document that preemption around wq_worker_sleeping() needs to be disabled to protect ->sleeping and not just as an optimisation. Fixes: 6d25be5782e48 ("sched/core, workqueues: Distangle worker accounting from rq lock") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Tejun Heo <tj@kernel.org> Link: https://lkml.kernel.org/r/20200327074308.GY11705@shao2-debian
| * | | sched/fair: Fix negative imbalance in imbalance calculationAubrey Li2020-04-081-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A negative imbalance value was observed after imbalance calculation, this happens when the local sched group type is group_fully_busy, and the average load of local group is greater than the selected busiest group. Fix this problem by comparing the average load of the local and busiest group before imbalance calculation formula. Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Phil Auld <pauld@redhat.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/1585201349-70192-1-git-send-email-aubrey.li@intel.com
| * | | sched/fair: Fix race between runtime distribution and assignmentHuaixin Chang2020-04-081-20/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there is a potential race between distribute_cfs_runtime() and assign_cfs_rq_runtime(). Race happens when cfs_b->runtime is read, distributes without holding lock and finds out there is not enough runtime to charge against after distribution. Because assign_cfs_rq_runtime() might be called during distribution, and use cfs_b->runtime at the same time. Fibtest is the tool to test this race. Assume all gcfs_rq is throttled and cfs period timer runs, slow threads might run and sleep, returning unused cfs_rq runtime and keeping min_cfs_rq_runtime in their local pool. If all this happens sufficiently quickly, cfs_b->runtime will drop a lot. If runtime distributed is large too, over-use of runtime happens. A runtime over-using by about 70 percent of quota is seen when we test fibtest on a 96-core machine. We run fibtest with 1 fast thread and 95 slow threads in test group, configure 10ms quota for this group and see the CPU usage of fibtest is 17.0%, which is far more than the expected 10%. On a smaller machine with 32 cores, we also run fibtest with 96 threads. CPU usage is more than 12%, which is also more than expected 10%. This shows that on similar workloads, this race do affect CPU bandwidth control. Solve this by holding lock inside distribute_cfs_runtime(). Fixes: c06f04c70489 ("sched: Fix potential near-infinite distribute_cfs_runtime() loop") Reviewed-by: Ben Segall <bsegall@google.com> Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/lkml/20200325092602.22471-1-changhuaixin@linux.alibaba.com/
| * | | sched/fair: Align rq->avg_idle and rq->avg_scan_costValentin Schneider2020-04-083-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sched/core.c uses update_avg() for rq->avg_idle and sched/fair.c uses an open-coded version (with the exact same decay factor) for rq->avg_scan_cost. On top of that, select_idle_cpu() expects to be able to compare these two fields. The only difference between the two is that rq->avg_scan_cost is computed using a pure division rather than a shift. Turns out it actually matters, first of all because the shifted value can be negative, and the standard has this to say about it: """ The result of E1 >> E2 is E1 right-shifted E2 bit positions. [...] If E1 has a signed type and a negative value, the resulting value is implementation-defined. """ Not only this, but (arithmetic) right shifting a negative value (using 2's complement) is *not* equivalent to dividing it by the corresponding power of 2. Let's look at a few examples: -4 -> 0xF..FC -4 >> 3 -> 0xF..FF == -1 != -4 / 8 -8 -> 0xF..F8 -8 >> 3 -> 0xF..FF == -1 == -8 / 8 -9 -> 0xF..F7 -9 >> 3 -> 0xF..FE == -2 != -9 / 8 Make update_avg() use a division, and export it to the private scheduler header to reuse it where relevant. Note that this still lets compilers use a shift here, but should prevent any unwanted surprise. The disassembly of select_idle_cpu() remains unchanged on arm64, and ttwu_do_wakeup() gains 2 instructions; the diff sort of looks like this: - sub x1, x1, x0 + subs x1, x1, x0 // set condition codes + add x0, x1, #0x7 + csel x0, x0, x1, mi // x0 = x1 < 0 ? x0 : x1 add x0, x3, x0, asr #3 which does the right thing (i.e. gives us the expected result while still using an arithmetic shift) Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200330090127.16294-1-valentin.schneider@arm.com
* | | | Merge tag 'perf-urgent-2020-04-12' of ↵Linus Torvalds2020-04-124-31/+573
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixes/updates for perf: - Fix the perf event cgroup tracking which tries to track the cgroup even for disabled events. - Add Ice Lake server support for uncore events - Disable pagefaults when retrieving the physical address in the sampling code" * tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Disable page faults when getting phys address perf/x86/intel/uncore: Add Ice Lake server uncore support perf/cgroup: Correct indirection in perf_less_group_idx() perf/core: Fix event cgroup tracking
| * | | | perf/core: Disable page faults when getting phys addressJiri Olsa2020-04-081-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We hit following warning when running tests on kernel compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y: WARNING: CPU: 19 PID: 4472 at mm/gup.c:2381 __get_user_pages_fast+0x1a4/0x200 CPU: 19 PID: 4472 Comm: dummy Not tainted 5.6.0-rc6+ #3 RIP: 0010:__get_user_pages_fast+0x1a4/0x200 ... Call Trace: perf_prepare_sample+0xff1/0x1d90 perf_event_output_forward+0xe8/0x210 __perf_event_overflow+0x11a/0x310 __intel_pmu_pebs_event+0x657/0x850 intel_pmu_drain_pebs_nhm+0x7de/0x11d0 handle_pmi_common+0x1b2/0x650 intel_pmu_handle_irq+0x17b/0x370 perf_event_nmi_handler+0x40/0x60 nmi_handle+0x192/0x590 default_do_nmi+0x6d/0x150 do_nmi+0x2f9/0x3c0 nmi+0x8e/0xd7 While __get_user_pages_fast() is IRQ-safe, it calls access_ok(), which warns on: WARN_ON_ONCE(!in_task() && !pagefault_disabled()) Peter suggested disabling page faults around __get_user_pages_fast(), which gets rid of the warning in access_ok() call. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200407141427.3184722-1-jolsa@kernel.org
| * | | | perf/x86/intel/uncore: Add Ice Lake server uncore supportKan Liang2020-04-083-0/+522
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uncore subsystem in Ice Lake server is similar to previous server. There are some differences in config register encoding and pci device IDs. The uncore PMON units in Ice Lake server include Ubox, Chabox, IIO, IRP, M2PCIE, PCU, M2M, PCIE3 and IMC. - For CHA, filter 1 register has been removed. The filter 0 register can be used by and of CHA events to be filterd by Thread/Core-ID. To do so, the control register's tid_en bit must be set to 1. - For IIO, there are some changes on event constraints. The MSR address and MSR offsets among counters are also changed. - For IRP, the MSR address and MSR offsets among counters are changed. - For M2PCIE, the counters are accessed by MSR now. Add new MSR address and MSR offsets. Change event constraints. - To determine the number of CHAs, have to read CAPID6(Low) and CAPID7 (High) now. - For M2M, update the PCICFG address and Device ID. - For UPI, update the PCICFG address, Device ID and counter address. - For M3UPI, update the PCICFG address, Device ID, counter address and event constraints. - For IMC, update the formular to calculate MMIO BAR address, which is MMIO_BASE + specific MEM_BAR offset. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/1585842411-150452-1-git-send-email-kan.liang@linux.intel.com
| * | | | perf/cgroup: Correct indirection in perf_less_group_idx()Ian Rogers2020-04-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The void* in perf_less_group_idx() is to a member in the array which points at a perf_event*, as such it is a perf_event**. Reported-By: John Sperbeck <jsperbeck@google.com> Fixes: 6eef8a7116de ("perf/core: Use min_heap in visit_groups_merge()") Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200321164331.107337-1-irogers@google.com
| * | | | perf/core: Fix event cgroup trackingPeter Zijlstra2020-04-081-27/+43
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Song reports that installing cgroup events is broken since: db0503e4f675 ("perf/core: Optimize perf_install_in_event()") The problem being that cgroup events try to track cpuctx->cgrp even for disabled events, which is pointless and actively harmful since the above commit. Rework the code to have explicit enable/disable hooks for cgroup events, such that we can limit cgroup tracking to active events. More specifically, since the above commit disabled events are no longer added to their context from the 'right' CPU, and we can't access things like the current cgroup for a remote CPU. Cc: <stable@vger.kernel.org> # v5.5+ Fixes: db0503e4f675 ("perf/core: Optimize perf_install_in_event()") Reported-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Reviewed-by: Song Liu <songliubraving@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200318193337.GB20760@hirez.programming.kicks-ass.net
* | | | Merge tag 'locking-urgent-2020-04-12' of ↵Linus Torvalds2020-04-123-26/+51
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount
| * | | | locking/lockdep: Improve 'invalid wait context' splatPeter Zijlstra2020-04-081-20/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'invalid wait context' splat doesn't print all the information required to reconstruct / validate the error, specifically the irq-context state is missing. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | locking/refcount: Document interaction with PID_MAX_LIMITJann Horn2020-04-081-5/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document the circumstances under which refcount_t's saturation mechanism works deterministically. Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200303105427.260620-1-jannh@google.com
| * | | | locking/percpu-rwsem: Fix a task_struct refcountQian Cai2020-04-081-1/+2
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit: 7f26482a872c ("locking/percpu-rwsem: Remove the embedded rwsem") introduced task_struct memory leaks due to messing up the task_struct refcount. At the beginning of percpu_rwsem_wake_function(), it calls get_task_struct(), but if the trylock failed, it will remain in the waitqueue. However, it will run percpu_rwsem_wake_function() again with get_task_struct() to increase the refcount but then only call put_task_struct() once the trylock succeeded. Fix it by adjusting percpu_rwsem_wake_function() a bit to guard against when percpu_rwsem_wait() observing !private, terminating the wait and doing a quick exit() while percpu_rwsem_wake_function() then doing wake_up_process(p) as a use-after-free. Fixes: 7f26482a872c ("locking/percpu-rwsem: Remove the embedded rwsem") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200330213002.2374-1-cai@lca.pw
* | | | Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2020-04-1212-238/+272
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull cifs fixes from Steve French: "Ten cifs/smb fixes: - five RDMA (smbdirect) related fixes - add experimental support for swap over SMB3 mounts - also a fix which improves performance of signed connections" * tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: enable swap on SMB3 mounts smb3: change noisy error message to FYI smb3: smbdirect support can be configured by default cifs: smbd: Do not schedule work to send immediate packet on every receive cifs: smbd: Properly process errors on ib_post_send cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending cifs: smbd: Check send queue size before posting a send cifs: smbd: Merge code to track pending packets cifs: ignore cached share root handle closing errors
| * | | | smb3: enable swap on SMB3 mountsSteve French2020-04-104-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add experimental support for allowing a swap file to be on an SMB3 mount. There are use cases where swapping over a secure network filesystem is preferable. In some cases there are no local block devices large enough, and network block devices can be hard to setup and secure. And in some cases there are no local block devices at all (e.g. with the recent addition of remote boot over SMB3 mounts). There are various enhancements that can be added later e.g.: - doing a mandatory byte range lock over the swapfile (until the Linux VFS is modified to notify the file system that an open is for a swapfile, when the file can be opened "DENY_ALL" to prevent others from opening it). - pinning more buffers in the underlying transport to minimize memory allocations in the TCP stack under the fs - documenting how to create ACLs (on the server) to secure the swapfile (or adding additional tools to cifs-utils to make it easier) Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
| * | | | smb3: change noisy error message to FYISteve French2020-04-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The noisy posix error message in readdir was supposed to be an FYI (not enabled by default) CIFS VFS: XXX dev 66306, reparse 0, mode 755 Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
| * | | | smb3: smbdirect support can be configured by defaultSteve French2020-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smbdirect support (SMB3 over RDMA) should be enabled by default in many configurations. It is not experimental and is stable enough and has enough performance benefits to recommend that it be configured by default. Change the "If unsure N" to "If unsure Y" in the description of the configuration parameter. Acked-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | cifs: smbd: Do not schedule work to send immediate packet on every receiveLong Li2020-04-072-52/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Immediate packets should only be sent to peer when there are new receive credits made available. New credits show up on freeing receive buffer, not on receiving data. Fix this by avoid unnenecessary work schedules. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | cifs: smbd: Properly process errors on ib_post_sendLong Li2020-04-071-123/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When processing errors from ib_post_send(), the transport state needs to be rolled back to the condition before the error. Refactor the old code to make it easy to roll back on IB errors, and fix this. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | cifs: Allocate crypto structures on the fly for calculating signatures of ↵Long Li2020-04-073-36/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | incoming packets CIFS uses pre-allocated crypto structures to calculate signatures for both incoming and outgoing packets. In this way it doesn't need to allocate crypto structures for every packet, but it requires a lock to prevent concurrent access to crypto structures. Remove the lock by allocating crypto structures on the fly for incoming packets. At the same time, we can still use pre-allocated crypto structures for outgoing packets, as they are already protected by transport lock srv_mutex. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | cifs: smbd: Update receive credits before sending and deal with credits roll ↵Long Li2020-04-071-7/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | back on failure before sending Recevie credits should be updated before sending the packet, not before a work is scheduled. Also, the value needs roll back if something fails and cannot send. Signed-off-by: Long Li <longli@microsoft.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | cifs: smbd: Check send queue size before posting a sendLong Li2020-04-072-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes the remote peer may return more send credits than the send queue depth. If all the send credits are used to post senasd, we may overflow the send queue. Fix this by checking the send queue size before posting a send. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | cifs: smbd: Merge code to track pending packetsLong Li2020-04-073-39/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As an optimization, SMBD tries to track two types of packets: packets with payload and without payload. There is no obvious benefit or performance gain to separately track two types of packets. Just treat them as pending packets and merge the tracking code. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | cifs: ignore cached share root handle closing errorsAurelien Aptel2020-04-071-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix tcon use-after-free and NULL ptr deref. Customer system crashes with the following kernel log: [462233.169868] CIFS VFS: Cancelling wait for mid 4894753 cmd: 14 => a QUERY DIR [462233.228045] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.305922] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.306205] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347060] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347107] CIFS VFS: Close unmatched open [462233.347113] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 ... [exception RIP: cifs_put_tcon+0xa0] (this is doing tcon->ses->server) #6 [...] smb2_cancelled_close_fid at ... [cifs] #7 [...] process_one_work at ... #8 [...] worker_thread at ... #9 [...] kthread at ... The most likely explanation we have is: * When we put the last reference of a tcon (refcount=0), we close the cached share root handle. * If closing a handle is interrupted, SMB2_close() will queue a SMB2_close() in a work thread. * The queued object keeps a tcon ref so we bump the tcon refcount, jumping from 0 to 1. * We reach the end of cifs_put_tcon(), we free the tcon object despite it now having a refcount of 1. * The queued work now runs, but the tcon, ses & server was freed in the meantime resulting in a crash. THREAD 1 ======== cifs_put_tcon => tcon refcount reach 0 SMB2_tdis close_shroot_lease close_shroot_lease_locked => if cached root has lease && refcount = 0 smb2_close_cached_fid => if cached root valid SMB2_close => retry close in a thread if interrupted smb2_handle_cancelled_close __smb2_handle_cancelled_close => !! tcon refcount bump 0 => 1 !! INIT_WORK(&cancelled->work, smb2_cancelled_close_fid); queue_work(cifsiod_wq, &cancelled->work) => queue work tconInfoFree(tcon); ==> freed! cifs_put_smb_ses(ses); ==> freed! THREAD 2 (workqueue) ======== smb2_cancelled_close_fid SMB2_close(0, cancelled->tcon, ...); => use-after-free of tcon cifs_put_tcon(cancelled->tcon); => tcon refcount reach 0 second time *CRASH* Fixes: d9191319358d ("CIFS: Close cached root handle only if it has a lease") Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
* | | | | Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds2020-04-121-0/+1
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NFS client bugfix from Trond Myklebust: "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()" * tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS: Fix RCU lock leakage
| * | | | | pNFS: Fix RCU lock leakageTrond Myklebust2020-04-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another brown paper bag moment. pnfs_alloc_ds_commits_list() is leaking the RCU lock. Fixes: a9901899b649 ("pNFS: Add infrastructure for cleaning up per-layout commit structures") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-29 18:36:27 +0000