summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mtd: rawnand: rockchip: Align hwecc vs. raw page helper layoutsJohan Jonker2023-07-151-13/+21
| | | | | | | | | | | | | | | | | | | | | | | | | Currently, read/write_page_hwecc() and read/write_page_raw() are not aligned: there is a mismatch in the OOB bytes which are not read/written at the same offset in both cases (raw vs. hwecc). This is a real problem when relying on the presence of the Page Addresses (PA) when using the NAND chip as a boot device, as the BootROM expects additional data in the OOB area at specific locations. Rockchip boot blocks are written per 4 x 512 byte sectors per page. Each page with boot blocks must have a page address (PA) pointer in OOB to the next page. Pages are written in a pattern depending on the NAND chip ID. Generate boot block page address and pattern for hwecc in user space and copy PA data to/from the already reserved last 4 bytes before ECC in the chip->oob_poi data layout. Align the different helpers. This change breaks existing jffs2 users. Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/5e782c08-862b-51ae-47ff-3299940928ca@gmail.com
* mtd: rawnand: rockchip: fix oobfree offset and descriptionJohan Jonker2023-07-151-7/+4
| | | | | | | | | | | | | | | | | | | | Rockchip boot blocks are written per 4 x 512 byte sectors per page. Each page with boot blocks must have a page address (PA) pointer in OOB to the next page. The currently advertised free OOB area starts at offset 6, like if 4 PA bytes were located right after the BBM. This is wrong as the PA bytes are located right before the ECC bytes. Fix the layout by allowing access to all bytes between the BBM and the PA bytes instead of reserving 4 bytes right after the BBM. This change breaks existing jffs2 users. Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/d202f12d-188c-20e8-f2c2-9cc874ad4d22@gmail.com
* mtd: rawnand: meson: fix OOB available bytes for ECCArseniy Krasnov2023-07-121-2/+1
| | | | | | | | | | | | | | It is incorrect to calculate number of OOB bytes for ECC engine using some "already known" ECC step size (1024 bytes here). Number of such bytes for ECC engine must be whole OOB except 2 bytes for bad block marker, while proper ECC step size and strength will be selected by ECC logic. Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Cc: <Stable@vger.kernel.org> Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230705065211.293500-1-AVKrasnov@sberdevices.ru
* mtd: rawnand: omap_elm: Fix incorrect type in assignmentRoger Quadros2023-07-121-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once the ECC word endianness is converted to BE32, we force cast it to u32 so we can use elm_write_reg() which in turn uses writel(). Fixes below sparse warnings: drivers/mtd/nand/raw/omap_elm.c:180:37: sparse: expected unsigned int [usertype] val drivers/mtd/nand/raw/omap_elm.c:180:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:185:37: sparse: expected unsigned int [usertype] val drivers/mtd/nand/raw/omap_elm.c:185:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:190:37: sparse: expected unsigned int [usertype] val drivers/mtd/nand/raw/omap_elm.c:190:37: sparse: got restricted __be32 [usertype] >> drivers/mtd/nand/raw/omap_elm.c:200:40: sparse: sparse: restricted __be32 degrades to integer drivers/mtd/nand/raw/omap_elm.c:206:39: sparse: sparse: restricted __be32 degrades to integer drivers/mtd/nand/raw/omap_elm.c:210:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:210:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:213:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:213:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:216:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:216:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:219:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:219:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:222:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:222:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:225:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:225:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:228:39: sparse: sparse: restricted __be32 degrades to integer Fixes: bf22433575ef ("mtd: devices: elm: Add support for ELM error correction") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306212211.WDXokuWh-lkp@intel.com/ Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230624184021.7740-1-rogerq@kernel.org
* mtd: spinand: winbond: Fix ecc_get_statusOlivier Maignial2023-07-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Reading ECC status is failing. w25n02kv_ecc_get_status() is using on-stack buffer for SPINAND_GET_FEATURE_OP() output. It is not suitable for DMA needs of spi-mem. Fix this by using the spi-mem operations dedicated buffer spinand->scratchbuf. See spinand->scratchbuf: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418 spi_mem_check_op(): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199 Fixes: 6154c7a58348 ("mtd: spinand: winbond: add Winbond W25N02KV flash support") Cc: stable@vger.kernel.org Signed-off-by: Olivier Maignial <olivier.maignial@hotmail.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032EDB9E36B764A33769039FE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM
* mtd: spinand: toshiba: Fix ecc_get_statusOlivier Maignial2023-07-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Reading ECC status is failing. tx58cxgxsxraix_ecc_get_status() is using on-stack buffer for SPINAND_GET_FEATURE_OP() output. It is not suitable for DMA needs of spi-mem. Fix this by using the spi-mem operations dedicated buffer spinand->scratchbuf. See spinand->scratchbuf: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418 spi_mem_check_op(): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199 Fixes: 10949af1681d ("mtd: spinand: Add initial support for Toshiba TC58CVG2S0H") Cc: stable@vger.kernel.org Signed-off-by: Olivier Maignial <olivier.maignial@hotmail.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032553D05FBE36DEE0D311EFE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM
* Linux 6.5-rc1v6.5-rc1Linus Torvalds2023-07-091-2/+2
|
* MAINTAINERS 2: Electric BoogalooLinus Torvalds2023-07-091-46/+46
| | | | | | | | | | | | | | | | | | | We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'dma-mapping-6.5-2023-07-09' of ↵Linus Torvalds2023-07-091-11/+35
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
| * swiotlb: reduce the number of areas to match actual memory pool sizePetr Tesarik2023-06-291-3/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although the desired size of the SWIOTLB memory pool is increased in swiotlb_adjust_nareas() to match the number of areas, the actual allocation may be smaller, which may require reducing the number of areas. For example, Xen uses swiotlb_init_late(), which in turn uses the page allocator. On x86, page size is 4 KiB and MAX_ORDER is 10 (1024 pages), resulting in a maximum memory pool size of 4 MiB. This corresponds to 2048 slots of 2 KiB each. The minimum area size is 128 (IO_TLB_SEGSIZE), allowing at most 2048 / 128 = 16 areas. If num_possible_cpus() is greater than the maximum number of areas, areas are smaller than IO_TLB_SEGSIZE and contiguous groups of free slots will span multiple areas. When allocating and freeing slots, only one area will be properly locked, causing race conditions on the unlocked slots and ultimately data corruption, kernel hangs and crashes. Fixes: 20347fca71a3 ("swiotlb: split up the global swiotlb lock") Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * swiotlb: always set the number of areas before allocating the poolPetr Tesarik2023-06-291-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of areas defaults to the number of possible CPUs. However, the total number of slots may have to be increased after adjusting the number of areas. Consequently, the number of areas must be determined before allocating the memory pool. This is even explained with a comment in swiotlb_init_remap(), but swiotlb_init_late() adjusts the number of areas after slots are already allocated. The areas may end up being smaller than IO_TLB_SEGSIZE, which breaks per-area locking. While fixing swiotlb_init_late(), move all relevant comments before the definition of swiotlb_adjust_nareas() and convert them to kernel-doc. Fixes: 20347fca71a3 ("swiotlb: split up the global swiotlb lock") Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* | Merge tag 'irq_urgent_for_v6.5_rc1' of ↵Linus Torvalds2023-07-091-3/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
| * | irqdomain: Use return value of strreplace()Andy Shevchenko2023-06-301-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since strreplace() returns the pointer to the string itself, use it directly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230628150251.17832-1-andriy.shevchenko@linux.intel.com
* | | Merge tag 'x86_urgent_for_v6.5_rc1' of ↵Linus Torvalds2023-07-091-0/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
| * | | x86/xen: Fix secondary processors' FPU initializationJuergen Gross2023-07-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moving the call of fpu__init_cpu() from cpu_init() to start_secondary() broke Xen PV guests, as those don't call start_secondary() for APs. Call fpu__init_cpu() in Xen's cpu_bringup(), which is the Xen PV replacement of start_secondary(). Fixes: b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()") Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230703130032.22916-1-jgross@suse.com
* | | | Merge tag 'x86-core-2023-07-09' of ↵Linus Torvalds2023-07-091-0/+8
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
| * | | | x86/smp: Don't send INIT to boot CPUThomas Gleixner2023-07-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parking CPUs in INIT works well, except for the crash case when the CPU which invokes smp_park_other_cpus_in_init() is not the boot CPU. Sending INIT to the boot CPU resets the whole machine. Prevent this by validating that this runs on the boot CPU. If not fall back and let CPUs hang in HLT. Fixes: 45e34c8af58f ("x86/smp: Put CPUs into INIT on shutdown if possible") Reported-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/87ttui91jo.ffs@tglx
* | | | | Merge tag 'mips_6.5_1' of ↵Linus Torvalds2023-07-0910-53/+46
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
| * | | | | MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabledThomas Bogendoerfer2023-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") missed converting one place accessing cop0 registers, which results in a build error, if KVM_MIPS_DEBUG_COP0_COUNTERS is enabled. Fixes: e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
| * | | | | MIPS: dts: add missing space before {Krzysztof Kozlowski2023-07-062-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing whitespace between node name/label and opening {. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
| * | | | | MIPS: Loongson: Fix build error when make modules_installHuacai Chen2023-07-031-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 0e96ea5c3eb5904e5dc2f ("MIPS: Loongson64: Clean up use of cc-ifversion") we get a build error when make modules_install: cc1: error: '-mloongson-mmi' must be used with '-mhard-float' The reason is when make modules_install, 'call cc-option' doesn't work in $(KBUILD_CFLAGS) of 'CHECKFLAGS'. Then there is no -mno-loongson-mmi applied and -march=loongson3a enable MMI instructions. To be detail, the error message comes from the CHECKFLAGS invocation of $(CC) but it has no impact on the final result of make modules_install, it is purely a cosmetic issue. The error occurs because cc-option is defined in scripts/Makefile.compiler, which is not included in Makefile when running 'make modules_install', as install targets are not supposed to require the compiler; see commit 805b2e1d427aab4b ("kbuild: include Makefile.compiler only when compiler is needed"). As a result, the call to check for '-mno-loongson-mmi' just never happens. Fix this by partially reverting to the old logic, use 'call cc-option' to conditionally apply -march=loongson3a and -march=mips64r2. By the way, Loongson-2E/2F is also broken in commit 13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") so fix it together. Fixes: 13ceb48bc19c563e05f4 ("MIPS: Loongson2ef: Remove unnecessary {as,cc}-option calls") Fixes: 0e96ea5c3eb5904e5dc2 ("MIPS: Loongson64: Clean up use of cc-ifversion") Cc: stable@vger.kernel.org Cc: Feiyang Chen <chenfeiyang@loongson.cn> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
| * | | | | MIPS: KVM: Fix NULL pointer dereferenceHuacai Chen2023-07-035-36/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we get a NULL pointer dereference when creating a KVM guest: [ 146.243409] Starting KVM with MIPS VZ extensions [ 149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c [ 149.849177] Oops[#1]: [ 149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671 [ 149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020 [ 149.849192] $ 0 : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740 [ 149.849209] $ 4 : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000 [ 149.849221] $ 8 : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0 [ 149.849233] $12 : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0 [ 149.849245] $16 : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000 [ 149.849257] $20 : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000 [ 149.849269] $24 : 9800000106cd09ce ffffffff802f69d0 [ 149.849281] $28 : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c [ 149.849293] Hi : 00000335b2111e66 [ 149.849295] Lo : 6668d90061ae0ae9 [ 149.849298] epc : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849324] ra : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm] [ 149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE [ 149.849351] Cause : 1000000c (ExcCode 03) [ 149.849354] BadVA : 0000000000000300 [ 149.849357] PrId : 0014c004 (ICT Loongson-3) [ 149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables [ 149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030) [ 149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4 [ 149.849453] 9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000 [ 149.849465] 0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920 [ 149.849476] ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240 [ 149.849488] ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010 [ 149.849500] 0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000 [ 149.849511] 0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28 [ 149.849523] 0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0 [ 149.849535] 000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255 [ 149.849546] 0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255 [ 149.849558] ... [ 149.849565] Call Trace: [ 149.849567] [<ffffffffc06356ec>] kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849586] [<ffffffffc062cef4>] kvm_arch_vcpu_create+0x184/0x228 [kvm] [ 149.849605] [<ffffffffc062854c>] kvm_vm_ioctl+0x64c/0xf28 [kvm] [ 149.849623] [<ffffffff805209c0>] sys_ioctl+0xc8/0x118 [ 149.849631] [<ffffffff80219eb0>] syscall_common+0x34/0x58 The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu ->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded object. Fixes: 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") Cc: stable@vger.kernel.org Reported-by: Yu Zhao <yuzhao@google.com> Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
| * | | | | MIPS: Loongson: Fix cpu_probe_loongson() againHuacai Chen2023-07-031-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration") move decode_configs() from the beginning of cpu_probe_loongson() to the end in order to fix FTLB configuration. However, it breaks the CPUCFG decoding because decode_configs() use "c->options = xxxx" rather than "c->options |= xxxx", all information get from CPUCFG by decode_cpucfg() is lost. This causes error when creating a KVM guest on Loongson-3A4000: Exception Code: 4 not handled @ PC: 0000000087ad5981, inst: 0xcb7a1898 BadVaddr: 0x0 Status: 0x0 Fix this by moving the c->cputype setting to the beginning and moving decode_configs() after that. Fixes: 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration") Cc: stable@vger.kernel.org Cc: Huang Pei <huangpei@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
* | | | | | Merge tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2023-07-091-1/+1
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
| * | | | | | xfs: fix uninit warning in xfs_growfs_dataDarrick J. Wong2023-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quiet down this gcc warning: fs/xfs/xfs_fsops.c: In function ‘xfs_growfs_data’: fs/xfs/xfs_fsops.c:219:21: error: ‘lastag_extended’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 219 | if (lastag_extended) { | ^~~~~~~~~~~~~~~ fs/xfs/xfs_fsops.c:100:33: note: ‘lastag_extended’ was declared here 100 | bool lastag_extended; | ^~~~~~~~~~~~~~~ By setting its value explicitly. From code analysis I don't think this is a real problem, but I have better things to do than analyse this closely. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
* | | | | | | Merge tag '6.5-rc-smb3-client-fixes-part2' of ↵Linus Torvalds2023-07-094-5/+72
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.samba.org/sfrench/cifs-2.6 Pull more smb client updates from Steve French: - fix potential use after free in unmount - minor cleanup - add worker to cleanup stale directory leases * tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add a laundromat thread for cached directories smb: client: remove redundant pointer 'server' cifs: fix session state transition to avoid use-after-free issue
| * | | | | | | cifs: Add a laundromat thread for cached directoriesRonnie Sahlberg2023-07-052-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and drop cached directories after 30 seconds Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | | | | smb: client: remove redundant pointer 'server'Colin Ian King2023-07-011-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pointer 'server' is assigned but never read, the pointer is redundant and can be removed. Cleans up clang scan build warning: fs/smb/client/dfs.c:217:3: warning: Value stored to 'server' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | | | | cifs: fix session state transition to avoid use-after-free issueWinston Wen2023-07-011-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We switch session state to SES_EXITING without cifs_tcp_ses_lock now, it may lead to potential use-after-free issue. Consider the following execution processes: Thread 1: __cifs_put_smb_ses() spin_lock(&cifs_tcp_ses_lock) if (--ses->ses_count > 0) spin_unlock(&cifs_tcp_ses_lock) return spin_unlock(&cifs_tcp_ses_lock) ---> **GAP** spin_lock(&ses->ses_lock) if (ses->ses_status == SES_GOOD) ses->ses_status = SES_EXITING spin_unlock(&ses->ses_lock) Thread 2: cifs_find_smb_ses() spin_lock(&cifs_tcp_ses_lock) list_for_each_entry(ses, ...) spin_lock(&ses->ses_lock) if (ses->ses_status == SES_EXITING) spin_unlock(&ses->ses_lock) continue ... spin_unlock(&ses->ses_lock) if (ret) cifs_smb_ses_inc_refcount(ret) spin_unlock(&cifs_tcp_ses_lock) If thread 1 is preempted in the gap and thread 2 start executing, thread 2 will get the session, and soon thread 1 will switch the session state to SES_EXITING and start releasing it, even though thread 1 had increased the session's refcount and still uses it. So switch session state under cifs_tcp_ses_lock to eliminate this gap. Signed-off-by: Winston Wen <wentao@uniontech.com> Signed-off-by: Steve French <stfrench@microsoft.com>
* | | | | | | | Merge tag 'ntb-6.5' of https://github.com/jonmason/ntbLinus Torvalds2023-07-0910-33/+36
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
| * | | | | | | | ntb: hw: amd: Fix debugfs_create_dir error checkingAnup Sharma2023-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The debugfs_create_dir function returns ERR_PTR in case of error, and the only correct way to check if an error occurred is 'IS_ERR' inline function. This patch will replace the null-comparison with IS_ERR. Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb.rst: Fix copy and paste errorGeoff Levand2023-07-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems the text for the NTB MSI Test Client section was copied from the NTB Tool Test Client, but was not updated for the new section. Corrects the NTB MSI Test Client section text. Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb_netdev: Fix module_init problemGeoff Levand2023-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With both the ntb_transport_init and the ntb_netdev_init_module routines in the module_init init group, the ntb_netdev_init_module routine can be called before the ntb_transport_init routine that it depends on is called. To assure the proper initialization order put ntb_netdev_init_module in the late_initcall group. Fixes runtime errors where the ntb_netdev_init_module call fails with ENODEV. Signed-off-by: Geoff Levand <geoff@infradead.org> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb: intel: Remove redundant pci_clear_masterCai Huoqing2023-07-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb: epf: Remove redundant pci_clear_masterCai Huoqing2023-07-081-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb_hw_amd: Remove redundant pci_clear_masterCai Huoqing2023-07-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb: idt: drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas2023-07-081-12/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | MAINTAINERS: git://github -> https://github.com for jonmasonPalmer Dabbelt2023-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by: Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | NTB: EPF: fix possible memory leak in pci_vntb_probe()ruanjinjie2023-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As ntb_register_device() don't handle error of device_register(), if ntb_register_device() returns error in pci_vntb_probe(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | NTB: ntb_tool: Add check for devm_kcallocJiasheng Jiang2023-07-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the devm_kcalloc may return NULL pointer, it should be better to add check for the return value, as same as the others. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | NTB: ntb_transport: fix possible memory leak while device_register() failsYang Yingliang2023-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If device_register() returns error, the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and client_dev is freed in ntb_transport_client_release(). Fixes: fce8a7bb5b4b ("PCI-Express Non-Transparent Bridge Support") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb: intel: Fix error handling in intel_ntb_pci_driver_init()Yuan Can2023-07-081-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A problem about ntb_hw_intel create debugfs failed is triggered with the following log given: [ 273.112733] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0 [ 273.115342] debugfs: Directory 'ntb_hw_intel' with parent '/' already present! The reason is that intel_ntb_pci_driver_init() returns pci_register_driver() directly without checking its return value, if pci_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ntb_hw_intel can never be created later. intel_ntb_pci_driver_init() debugfs_create_dir() # create debugfs directory pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when pci_register_driver() returns error. Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | NTB: amd: Fix error handling in amd_ntb_pci_driver_init()Yuan Can2023-07-081-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A problem about ntb_hw_amd create debugfs failed is triggered with the following log given: [ 618.431232] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0 [ 618.433284] debugfs: Directory 'ntb_hw_amd' with parent '/' already present! The reason is that amd_ntb_pci_driver_init() returns pci_register_driver() directly without checking its return value, if pci_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ntb_hw_amd can never be created later. amd_ntb_pci_driver_init() debugfs_create_dir() # create debugfs directory pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when pci_register_driver() returns error. Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
| * | | | | | | | ntb: idt: Fix error handling in idt_pci_driver_init()Yuan Can2023-07-081-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A problem about ntb_hw_idt create debugfs failed is triggered with the following log given: [ 1236.637636] IDT PCI-E Non-Transparent Bridge Driver 2.0 [ 1236.639292] debugfs: Directory 'ntb_hw_idt' with parent '/' already present! The reason is that idt_pci_driver_init() returns pci_register_driver() directly without checking its return value, if pci_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ntb_hw_idt can never be created later. idt_pci_driver_init() debugfs_create_dir() # create debugfs directory pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when pci_register_driver() returns error. Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
* | | | | | | | | mm: lock newly mapped VMA with corrected orderingHugh Dickins2023-07-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lockdep is certainly right to complain about (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f but task is already holding lock: (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db Invert those to the usual ordering. Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible") Cc: stable@vger.kernel.org Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | | | Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of ↵Linus Torvalds2023-07-0818-44/+99
|\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "16 hotfixes. Six are cc:stable and the remainder address post-6.4 issues" The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since it was all hopefully fixed in mainline. * tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: lib: dhry: fix sleeping allocations inside non-preemptable section kasan, slub: fix HW_TAGS zeroing with slub_debug kasan: fix type cast in memory_is_poisoned_n mailmap: add entries for Heiko Stuebner mailmap: update manpage link bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page MAINTAINERS: add linux-next info mailmap: add Markus Schneider-Pargmann writeback: account the number of pages written back mm: call arch_swap_restore() from do_swap_page() squashfs: fix cache race with migration mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison docs: update ocfs2-devel mailing list address MAINTAINERS: update ocfs2-devel mailing list address mm: disable CONFIG_PER_VMA_LOCK until its fixed fork: lock VMAs of the parent process when forking
| * | | | | | | | | lib: dhry: fix sleeping allocations inside non-preemptable sectionGeert Uytterhoeven2023-07-081-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Smatch static checker reports the following warnings: lib/dhry_run.c:38 dhry_benchmark() warn: sleeping in atomic context lib/dhry_run.c:43 dhry_benchmark() warn: sleeping in atomic context Indeed, dhry() does sleeping allocations inside the non-preemptable section delimited by get_cpu()/put_cpu(). Fix this by using atomic allocations instead. Add error handling, as atomic these allocations may fail. Link: https://lkml.kernel.org/r/bac6d517818a7cd8efe217c1ad649fffab9cc371.1688568764.git.geert+renesas@glider.be Fixes: 13684e966d46283e ("lib: dhry: fix unstable smp_processor_id(_) usage") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/0469eb3a-02eb-4b41-b189-de20b931fa56@moroto.mountain Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | | | | | | kasan, slub: fix HW_TAGS zeroing with slub_debugAndrey Konovalov2023-07-082-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested") added precise kmalloc redzone poisoning to the slub_debug functionality. However, this commit didn't account for HW_TAGS KASAN fully initializing the object via its built-in memory initialization feature. Even though HW_TAGS KASAN memory initialization contains special memory initialization handling for when slub_debug is enabled, it does not account for in-object slub_debug redzones. As a result, HW_TAGS KASAN can overwrite these redzones and cause false-positive slub_debug reports. To fix the issue, avoid HW_TAGS KASAN memory initialization when slub_debug is enabled altogether. Implement this by moving the __slub_debug_enabled check to slab_post_alloc_hook. Common slab code seems like a more appropriate place for a slub_debug check anyway. Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com Fixes: 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Will Deacon <will@kernel.org> Acked-by: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: kasan-dev@googlegroups.com Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | | | | | | kasan: fix type cast in memory_is_poisoned_nAndrey Konovalov2023-07-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13 builtins") introduced a bug into the memory_is_poisoned_n implementation: it effectively removed the cast to a signed integer type after applying KASAN_GRANULE_MASK. As a result, KASAN started failing to properly check memset, memcpy, and other similar functions. Fix the bug by adding the cast back (through an additional signed integer variable to make the code more readable). Link: https://lkml.kernel.org/r/8c9e0251c2b8b81016255709d4ec42942dcaf018.1688431866.git.andreyknvl@google.com Fixes: bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13 builtins") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | | | | | | mailmap: add entries for Heiko StuebnerHeiko Stuebner2023-07-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I am going to lose my vrull.eu address at the end of july, and while adding it to mailmap I also realised that there are more old addresses from me dangling, so update .mailmap for all of them. Link: https://lkml.kernel.org/r/20230704163919.1136784-3-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 00:06:39 +0000