summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* iio: addac: ad74413r: add support for reset-gpioRasmus Villemoes2022-11-231-0/+12
| | | | | | | | | | | | | | | | We have a board where the reset pin of the ad74412 is connected to a gpio, but also pulled low (i.e., asserted) by default. Hence to get the chip out of reset, the driver needs to know about that gpio and deassert the reset signal before attempting to communicate with the chip. When a reset-gpio is given in device tree, use that instead of the software reset. According to the data sheet, the two methods are functionally equivalent. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20221115095517.1008632-4-linux@rasmusvillemoes.dk Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* dt-bindings: iio: ad74413r: add optional reset-gpiosRasmus Villemoes2022-11-231-0/+4
| | | | | | | | | | The ad74412 and ad74413 devices have an active-low reset pin. Add a binding allowing one to specify a gpio tied to that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221115095517.1008632-3-linux@rasmusvillemoes.dk Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: addac: ad74413r: add spi_device_id tableRasmus Villemoes2022-11-231-0/+17
| | | | | | | | | | Silence the run-time warning SPI driver ad74413r has no spi_device_id for adi,ad74412r Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20221115095517.1008632-2-linux@rasmusvillemoes.dk Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* dt-bindings: iio/adc: qcom,spmi-iadc: use double compatiblesLuca Weiss2022-11-231-2/+5
| | | | | | | | | | | As in other bindings, let's use specific compatibles together with the fallback compatible. Adjust the bindings for it. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221031182456.952648-1-luca@z3ntu.xyz Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16isLorenzo Bianconi2022-11-231-0/+1
| | | | | | | | | Add device bindings for lsm6dso16is IMU sensor. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/55b15b3e8453a12edcf8195ef9c9243a76f87096.1668605631.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: imu: st_lsm6dsx: add support to LSM6DSO16ISLorenzo Bianconi2022-11-235-3/+141
| | | | | | | | | | Add support to STM LSM6DSO16IS (accelerometer and gyroscope) Mems sensor. Datasheet: https://www.st.com/resource/en/datasheet/lsm6dso16is.pdf Tested-by: Mario Tesi <mario.tesi@st.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/df6a9d4653cd69f7204190f8b6a9b618fd48bd23.1668605631.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: addac: add AD74115 driverCosmin Tanislav2022-11-234-0/+1963
| | | | | | | | | | | | | | | | | | | | | | | | | | The AD74115H is a single-channel, software-configurable, input and output device for industrial control applications. The AD74115H provides a wide range of use cases, integrated on a single chip. These use cases include analog output, analog input, digital output, digital input, resistance temperature detector (RTD), and thermocouple measurement capability. The AD74115H also has an integrated HART modem. A serial peripheral interface (SPI) is used to handle all communications to the device, including communications with the HART modem. The digital input and digital outputs can be accessed via the SPI or the general-purpose input and output (GPIO) pins to support higher speed data rates. The device features a 16-bit, sigma-delta analog-to-digital converter (ADC) and a 14-bit digital-to-analog converter (DAC). The AD74115H contains a high accuracy 2.5 V on-chip reference that can be used as the DAC and ADC reference. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221117080916.411766-3-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* dt-bindings: iio: addac: add AD74115Cosmin Tanislav2022-11-232-0/+380
| | | | | | | | | | | | | | | | | | | | | | | | | | The AD74115H is a single-channel, software-configurable, input and output device for industrial control applications. The AD74115H provides a wide range of use cases, integrated on a single chip. These use cases include analog output, analog input, digital output, digital input, resistance temperature detector (RTD), and thermocouple measurement capability. The AD74115H also has an integrated HART modem. A serial peripheral interface (SPI) is used to handle all communications to the device, including communications with the HART modem. The digital input and digital outputs can be accessed via the SPI or the general-purpose input and output (GPIO) pins to support higher speed data rates. The device features a 16-bit, sigma-delta analog-to-digital converter (ADC) and a 14-bit digital-to-analog converter (DAC). The AD74115H contains a high accuracy 2.5 V on-chip reference that can be used as the DAC and ADC reference. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221117080916.411766-2-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: addac: ad74413r: fix integer promotion bug in ↵Rasmus Villemoes2022-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | ad74413_get_input_current_offset() The constant AD74413R_ADC_RESULT_MAX is defined via GENMASK, so its type is "unsigned long". Hence in the expression voltage_offset * AD74413R_ADC_RESULT_MAX, voltage_offset is first promoted to unsigned long, and since it may be negative, that results in a garbage value. For example, when range is AD74413R_ADC_RANGE_5V_BI_DIR, voltage_offset is -2500 and voltage_range is 5000, so the RHS of this assignment is, depending on sizeof(long), either 826225UL or 3689348814709142UL, which after truncation to int then results in either 826225 or 1972216214 being the output from in_currentX_offset. Casting to int avoids that promotion and results in the correct -32767 output. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: fea251b6a5db (iio: addac: add AD74413R driver) Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221118123209.1658420-1-linux@rasmusvillemoes.dk Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: use devm_platform_get_and_ioremap_resource()Minghao Chi2022-11-231-2/+1
| | | | | | | | | | | | Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/202211220935338446115@zte.com.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: imu: adis: Remove adis_initial_startup functionRamona Bolboaca2022-11-231-12/+0
| | | | | | | | | | Remove adis_initial_startup function since it is not used anymore. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-10-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* staging: iio: accel: adis16240: Call '__adis_initial_startup()'Ramona Bolboaca2022-11-231-1/+1
| | | | | | | | | | | Call '__adis_initial_startup()' instead of its locked variant in 'adis16240_probe()'. The locks are not needed at this point. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-9-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* staging: iio: accel: adis16203: Call '__adis_initial_startup()'Ramona Bolboaca2022-11-231-1/+1
| | | | | | | | | | | Call '__adis_initial_startup()' instead of its locked variant in 'adis16203_probe()'. The locks are not needed at this point. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-8-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: imu: adis16400: Call '__adis_initial_startup()' in probeRamona Bolboaca2022-11-231-1/+1
| | | | | | | | | | | Call '__adis_initial_startup()' instead of its locked variant in 'adis16400_probe()'. The locks are not needed at this point. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-7-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: gyro: adis16260: Call '__adis_initial_startup()' in probeRamona Bolboaca2022-11-231-1/+1
| | | | | | | | | | | Call '__adis_initial_startup()' instead of its locked variant in 'adis16260_probe()'. The locks are not needed at this point. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-6-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: gyro: adis16136: Call '__adis_initial_startup()' in probeRamona Bolboaca2022-11-231-1/+1
| | | | | | | | | | | Call '__adis_initial_startup()' instead of its locked variant in 'adis16136_probe()'. The locks are not needed at this point. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-5-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: accel: adis16209: Call '__adis_initial_startup()' in probeRamona Bolboaca2022-11-231-1/+1
| | | | | | | | | | | Call '__adis_initial_startup()' instead of its locked variant in 'adis16209_probe()'. The locks are not needed at this point. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-4-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: accel: adis16201: Call '__adis_initial_startup()' in probeRamona Bolboaca2022-11-231-1/+1
| | | | | | | | | | | Call '__adis_initial_startup()' instead of its locked variant in 'adis16201_probe()'. The locks are not needed at this point. Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-3-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adis: add '__adis_enable_irq()' implementationRamona Bolboaca2022-11-232-19/+22
| | | | | | | | | | | | | | | | | | | | | | Add '__adis_enable_irq()' implementation which is the unlocked version of 'adis_enable_irq()'. Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from '__adis_intial_startup()' to keep the expected unlocked functionality. This fix is needed to remove a deadlock for all devices which are using 'adis_initial_startup()'. The deadlock occurs because the same mutex is acquired twice, without releasing it. The mutex is acquired once inside 'adis_initial_startup()', before calling '__adis_initial_startup()', and once inside 'adis_enable_irq()', which is called by '__adis_initial_startup()'. The deadlock is removed by calling '__adis_enable_irq()', instead of 'adis_enable_irq()' from within '__adis_initial_startup()'. Fixes: b600bd7eb3335 ("iio: adis: do not disabe IRQs in 'adis_init()'") Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221122082757.449452-2-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: max11410: fix incomplete vref buffer maskIbrahim Tilki2022-11-231-1/+1
| | | | | | | | | | | | | | VREFP bit was missing from channel configuration mask and VREFN bit was included twice instead which fails to enable positive reference buffer when requested by a channel. Channels that don't enable vrefp buffer were not affected. Fixes: a44ef7c46097 ("iio: adc: add max11410 adc driver") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com> Link: https://lore.kernel.org/r/20221122114718.17557-1-Ibrahim.Tilki@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* dt-bindings: iio: adc: ad7923: adjust documentationEdmund Berenson2022-11-231-9/+17
| | | | | | | | | | | | | - The ad7927 is fully compatible with ad7928 driver, add documentation for device. - ad7923 and ad7924 are treated the same in the driver, show the relationship in the documentation. Suggested-by: Lukasz Zemla <Lukasz.Zemla@woodward.com> Signed-off-by: Edmund Berenson <edmund.berenson@emlix.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221122161437.18937-1-edmund.berenson@emlix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: Add driver support for Maxim MAX30208Rajat Khandelwal2022-11-234-0/+269
| | | | | | | | | | | Maxim MAX30208 is a digital temperature sensor with 0.1°C accuracy. Add support for max30208 driver in iio subsystem. Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30208.pdf Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com> Link: https://lore.kernel.org/r/20221122175300.800956-1-rajat.khandelwal@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* staging: iio: ade7854: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-569-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* staging: iio: ad5933: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-568-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* staging: iio: adt7316: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-567-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: tsys02d: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-191-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: tsys01: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-190-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: tmp007: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-189-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: tmp006: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-188-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: mlx90632: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-187-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: mlx90614: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Crt Mori<cmo@melexis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-186-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: proximity: sx9500: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-185-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: proximity: srf08: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-184-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: proximity: rfd77402: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-183-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: proximity: pulsedlight-lidar-lite-v2: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-182-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: proximity: mb1232: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-181-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: proximity: isl29501: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-180-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: zpa2326_i2c: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-179-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: t5403: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-178-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: st_pressure_i2c: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-177-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: ms5637: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-176-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: ms5611_i2c: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-175-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: mpl3115: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-174-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: mpl115_i2c: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-173-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: icp10100: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+2
| | | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20221118224540.619276-172-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: hp206c: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-171-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: hp03: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-170-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: dps310: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-169-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: dlhl60d: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-168-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: abp060mg: Convert to i2c's .probe_new()Uwe Kleine-König2022-11-231-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-166-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 08:47:21 +0000