summaryrefslogtreecommitdiffstats
path: root/Documentation/usb
Commit message (Collapse)AuthorAgeFilesLines
* usbip: add USBIP_URB_* URB transfer flagsShuah Khan2022-08-311-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USBIP driver packs URB transfer flags in network packets that are exchanged between Server (usbip_host) and Client (vhci_hcd). URB_* flags are internal to kernel and could change. Where as USBIP URB flags exchanged in network packets are USBIP user API must not change. Add USBIP_URB* flags to make this an explicit API and change the client and server to map them. Details as follows: Client tx path (USBIP_CMD_SUBMIT): - Maps URB_* to USBIP_URB_* when it sends USBIP_CMD_SUBMIT packet. Server rx path (USBIP_CMD_SUBMIT): - Maps USBIP_URB_* to URB_* when it receives USBIP_CMD_SUBMIT packet. Flags aren't included in USBIP_CMD_UNLINK and USBIP_RET_SUBMIT packets and no special handling is needed for them in the following cases: - Server rx path (USBIP_CMD_UNLINK) - Client rx path & Server tx path (USBIP_RET_SUBMIT) Update protocol documentation to reflect the change. Suggested-by: Hongren Zenithal Zheng <i@zenithal.me> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220824002456.94605-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_mass_storage: forced_eject attributeMaxim Devaev2022-07-142-0/+15
| | | | | | | | | | | | | | | | | It allows to reset prevent_medium_removal flag and "eject" the image. This can be useful to free the drive from a hunging host or if the host continues to use the drive even after unmounting (Linux does this). It's also a bit like using an unfolded paperclip on an optical drive. Previously, the undocumented method of sending SIGUSR1 to a special "file-storage" kernel thread could be used for these purposes, but when using multiple storages there was no way to distinguish one from the other, so we had to send a signal to everyone. Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Link: https://lore.kernel.org/r/20220711102956.19642-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* docs: usb: fix literal block marker in usbmon verification exampleJustin Swartz2022-06-091-1/+1
| | | | | | | | | The "Verify that bus sockets are present" example was not properly formatted due to a typo in the literal block marker. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Link: https://lore.kernel.org/r/20220604155431.23246-1-justin.swartz@risingedge.co.za Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* usb: gadget: uvc: allow changing interface name via configfsDan Vacura2022-04-211-0/+1
| | | | | | | | | | | Add a configfs entry, "function_name", to change the iInterface field for VideoControl. This name is used on host devices for user selection, useful when multiple cameras are present. The default will remain "UVC Camera". Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220401160447.5919-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac2: Optionally determine bInterval for HS and SSPavel Hofman2022-01-311-2/+2
| | | | | | | | | | | | | | | | | Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set to 0, determine the largest bInterval (4 to 1) for which the required bandwidth of the max samplerate fits the max allowed packet size. If the required bandwidth exceeds max bandwidth for single-packet mode (ep->mc=1), keep bInterval at 1. The FS speed is left at fixed bInterval=1. If for any speed the required bandwidth exceeds the max bandwidth corresponding to the selected/determined bInterval, print a warning. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac2: Add HS/SS bInterval to configfsPavel Hofman2022-01-311-0/+2
| | | | | | | | | | | | Allow configuring the HS/SS bInterval through configfs, via parameters p_hs_bint/c_hs_bint separately for playback/capture. The default param values are left at the original 4. Suggested-by: John Keeping <john@metanate.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac2: allow changing interface name via configfsYunhao Tian2022-01-261-0/+1
| | | | | | | | | | | This adds "function_name" configfs entry to change string value of the iInterface field. This field will be shown in Windows' audio settings panel, so being able to change it is useful. It will default to "Source/Sink" just as before. Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com> Link: https://lore.kernel.org/r/20220122112446.1415547-2-t123yh.xyz@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac1: allow changing interface name via configfsYunhao Tian2022-01-261-0/+1
| | | | | | | | | | | This adds "function_name" configfs entry to change string value of the iInterface field. This field will be shown in Windows' audio settings panel, so being able to change it is useful. It will default to "AC Interface" just as before if unchanged. Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com> Link: https://lore.kernel.org/r/20220122112446.1415547-1-t123yh.xyz@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac1: Support multiple sampling ratesJulian Scheel2022-01-261-2/+2
| | | | | | | | | | | | | | | | A list of sampling rates can be specified via configfs. All enabled sampling rates are sent to the USB host on request. When the host selects a sampling rate the internal active rate is updated. Config strings with single value stay compatible with the previous version. Multiple samplerates passed as configuration arrays to g_audio module when built for f_uac1. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-7-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac2: Support multiple sampling ratesJulian Scheel2022-01-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | A list of sampling rates can be specified via configfs. All enabled sampling rates are sent to the USB host on request. When the host selects a sampling rate, the internal active rate (stored in struct f_uac2) is updated. The gadget no longer supports only one frequency. Therefore USB strings corresponding to the clock sources are renamed from specific Hz value to general names Input clock/Output clock. Config strings with single value stay compatible with the previous version. Multiple samplerates passed as configuration arrays to g_audio module when built for f_uac2. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220121155308.48794-6-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* docs: ABI: fixed req_number desc in UAC1Pavel Hofman2021-12-301-1/+1
| | | | | | | | Fixed wording of the req_number description in UAC1 docs. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211225130929.205629-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* docs: usb: fix malformed tableHu Haowen2021-08-051-42/+42
| | | | | | | | | | The tables are separated with tabs and spaces mixed together, leading to malformation. Changed the characters all into spaces to solve this issue. Signed-off-by: Hu Haowen <src.res@email.cn> Link: https://lore.kernel.org/r/20210805040146.121526-1-src.res@email.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac1: add volume and mute supportRuslan Bilovol2021-07-211-8/+18
| | | | | | | | | | | | | | | | | | | | | This adds bi-directional (host->device, device->host) volume/mute support to the f_uac1 driver by adding Feature Units and interrupt endpoint. Currently only master channel is supported. Volume and mute are configurable through configfs, by default volume has -100..0 dB range with 1 dB step. Similar to existing flexible endpoints configuration, Feature Unit won't be added to the topology if both mute and volume are not enabled, also interrupt endpoint isn't added to the device if no feature unit is present Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20210712125529.76070-5-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac2: add volume and mute supportRuslan Bilovol2021-07-211-1/+11
| | | | | | | | | | | | | | | | | | | | | This adds bi-directional (host->device, device->host) volume/mute support to the f_uac2 driver by adding Feature Units and interrupt endpoint. Currently only master channel is supported. Volume and mute are configurable through configfs, by default volume has -100..0 dB range with 1 dB step. Similar to existing flexible endpoints configuration, Feature Unit won't be added to the topology if both mute and volume are not enabled, also interrupt endpoint isn't added to the device if no feature unit is present Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20210712125529.76070-4-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-5.14-rc1' of ↵Linus Torvalds2021-07-051-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ...
| * usb: gadget: u_audio: add real feedback implementationRuslan Bilovol2021-06-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds interface between userspace and feedback endpoint to report real feedback frequency to the Host. Current implementation adds new userspace interface ALSA mixer control "Capture Pitch 1000000" (similar to aloop driver's "PCM Rate Shift 100000" mixer control) Value in PPM is chosen to have correction value agnostic of the actual HW rate, which the application is not necessarily dealing with, while still retaining a good enough precision to allow smooth clock correction on the playback side, if necessary. Similar to sound/usb/endpoint.c, a slow down is allowed up to 25%. This has no impact on the required bandwidth. Speedup correction has an impact on the bandwidth reserved for the isochronous endpoint. The default allowed speedup is 500ppm. This seems to be more than enough but, if necessary, this is configurable through a module parameter. The reserved bandwidth is rounded up to the next packet size. Usage of this new control is easy to implement in existing userspace tools like alsaloop from alsa-utils. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210603220104.1216001-4-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: gadget: f_uac2: add adaptive sync support for captureRuslan Bilovol2021-06-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current f_uac2 USB OUT (aka 'capture') synchronization implements 'ASYNC' scenario which means USB Gadget has it's own freerunning clock and can update Host about real clock frequency through feedback endpoint so Host can align number of samples sent to the USB gadget to prevent overruns/underruns In case if Gadget can has no it's internal clock and can consume audio samples at any rate (for example, on the Gadget side someone records audio directly to a file, or audio samples are played through an external DAC as soon as they arrive), UAC2 spec suggests 'ADAPTIVE' synchronization type. Change UAC2 driver to make it configurable through additional 'c_sync' configfs file. Default remains 'asynchronous' with possibility to switch it to 'adaptive' Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210603220104.1216001-3-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'usb-5.13-rc2' of ↵Linus Torvalds2021-05-161-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.13-rc2. They consist of a number of resolutions for reported issues: - typec fixes for found problems - xhci fixes and quirk additions - dwc3 driver fixes - minor fixes found by Coverity - cdc-wdm fixes for reported problems All of these have been in linux-next for a few days with no reported issues" * tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits) usb: core: hub: fix race condition about TRSMRCY of resume usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default xhci: Add reset resume quirk for AMD xhci controller. usb: xhci: Increase timeout for HC halt xhci: Do not use GFP_KERNEL in (potentially) atomic context xhci: Fix giving back cancelled URBs even if halted endpoint can't reset xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI usb: musb: Fix an error message usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4 usb: fotg210-hcd: Fix an error message docs: usb: function: Modify path name usb: dwc3: omap: improve extcon initialization usb: typec: ucsi: Put fwnode in any case during ->probe() usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP usb: dwc2: Remove obsolete MODULE_ constants from platform.c usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe() usb: dwc3: imx8mp: detect dwc3 core node via compatible string usb: dwc3: gadget: Return success always for kick transfer in ep queue ...
| | * docs: usb: function: Modify path nameWei Ming Chen2021-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Original path does not exists, so changed to "Documentation/ABI/testing/configfs-usb-gadget" Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210506122020.7117-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | docs: usb: replace some charactersMauro Carvalho Chehab2021-06-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+feff (''): BOM as it is not needed on UTF-8 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/0a4b0c38a9cd1133402a04a7ff60fefd9682d42e.1623826294.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | | docs: usb: function: Modify path nameWei Ming Chen2021-05-131-1/+1
|/ / | | | | | | | | | | | | | | | | Original path does not exists, so changed to "Documentation/ABI/testing/configfs-usb-gadget" Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210506122020.7117-1-jj251510319013@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* / Documentation: drop optional BOMsRandy Dunlap2021-05-102-2/+2
|/ | | | | | | | | | | | | | | | | | | | A few of the Documentation .rst files begin with a Unicode byte order mark (BOM). The BOM may signify endianess for 16-bit or 32-bit encodings or indicate that the text stream is indeed Unicode. We don't need it for either of those uses. It may also interfere with (confuse) some software. Since we don't need it and its use is optional, just delete the uses of it in Documentation/. https://en.wikipedia.org/wiki/Byte_order_mark Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/20210506231907.14359-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* docs: usbip: Fix major fields and descriptions in protocolHongren Zheng (Zenithal)2021-04-091-151/+193
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old document for usbip protocol is misleading and hard to read: * Some fields in header are incorrect * Explanation of some fields are unclear or even wrong * Padding of header (namely all headers have the same length) is not explicitly pointed out, which is crucial for stream protocol like TCP Major changes: * Document the correct field as described in the codebase. * Document the padding in usbip headers. This is crucial for TCP stream hence these padding should be explicitly point out. In code these padding are implemented by a union of all headers. * Fix two FIXME related to usbip unlink and Document the behavior of unlink in different situation. * Clarify some field with more accurate explanation, like those fields associated with URB. Some constraints are extracted from code. * Delete specific transfer_flag doc in usbip as it should be documented by the URB doc in Documentation/driver-api/usb/URB.rst * Add data captured from wire as example Version change: From "PRELIMINARY DRAFT, MAY CONTAIN MISTAKES, 28 Jun 2011" To "Version 1, 31 Mar 2021" Co-developed-by: Alexandre Demers <alexandre.f.demers@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hongren Zheng <i@zenithal.me> Link: https://lore.kernel.org/r/YGNZHfmAbHO6fyAr@Sun Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: raw-gadget: update documentation and KconfigAndrey Konovalov2021-01-261-46/+56
| | | | | | | | | Update Raw Gadget documentation and Kconfig. Make the description more precise and clear, fix typos and grammar mistakes, and do other cleanups. Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/f4c650c94ae2b910e38819d51109cd5f0b251a2a.1611429174.git.andreyknvl@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: u_ether: support configuring interface names.Lorenzo Colitti2021-01-151-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows the administrator to configure the interface name of a function using u_ether (e.g., eem, ncm, rndis). Currently, all such interfaces, regardless of function type, are always called usb0, usb1, etc. This makes it very cumbersome to use more than one such type at a time, because userspace cannnot easily tell the interfaces apart and apply the right configuration to each one. Interface renaming in userspace based on driver doesn't help, because the interfaces all have the same driver. Without this patch, doing this require hacks/workarounds such as setting fixed MAC addresses on the functions, and then renaming by MAC address, or scraping configfs after each interface is created to find out what it is. Setting the interface name is done by writing to the same "ifname" configfs attribute that reports the interface name after the function is bound. The write must contain an interface pattern such as "usb%d" (which will cause the net core to pick the next available interface name starting with "usb"). This patch does not allow writing an exact interface name (as opposed to a pattern) because if the interface already exists at bind time, the bind will fail and the whole gadget will fail to activate. This could be allowed in a future patch. For compatibility with current userspace, when reading an ifname that has not currently been set, the result is still "(unnamed net_device)". Once a write to ifname happens, then reading ifname will return whatever was last written. Tested by configuring an rndis function and an ncm function on the same gadget, and writing "rndis%d" to ifname on the rndis function and "ncm%d" to ifname on the ncm function. When the gadget was bound, the rndis interface was rndis0 and the ncm interface was ncm0. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Link: https://lore.kernel.org/r/20210113234222.3272933-1-lorenzo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Replace HTTP links with HTTPS onesAlexander A. Klimov2020-07-213-7/+7
| | | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'docs-5.8' of git://git.lwn.net/linuxLinus Torvalds2020-06-011-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...
| * docs: filesystems: convert configfs.txt to ReSTMauro Carvalho Chehab2020-05-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add a SPDX header; - Adjust document and section titles; - Use copyright symbol; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add it to filesystems/index.rst. Also, as this file is alone on its own dir, and it doesn't seem too likely that other documents will follow it, let's move it to the filesystems/ root documentation dir. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/c2424ec2ad4d735751434ff7f52144c44aa02d5a.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | usb: raw-gadget: documentation updatesAndrey Konovalov2020-05-141-2/+28
| | | | | | | | | | | | | | | | | | | | | | Mention the issue with fixed UDC addresses. Links external examples and test suite. Add more implmenetation details and potential improvements. Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* | usb: raw-gadget: support stalling/halting/wedging endpointsAndrey Konovalov2020-05-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Raw Gadget is currently unable to stall/halt/wedge gadget endpoints, which is required for proper emulation of certain USB classes. This patch adds a few more ioctls: - USB_RAW_IOCTL_EP0_STALL allows to stall control endpoint #0 when there's a pending setup request for it. - USB_RAW_IOCTL_SET/CLEAR_HALT/WEDGE allow to set/clear halt/wedge status on non-control non-isochronous endpoints. Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* | usb: raw-gadget: fix gadget endpoint selectionAndrey Konovalov2020-05-141-3/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently automatic gadget endpoint selection based on required features doesn't work. Raw Gadget tries iterating over the list of available endpoints and finding one that has the right direction and transfer type. Unfortunately selecting arbitrary gadget endpoints (even if they satisfy feature requirements) doesn't work, as (depending on the UDC driver) they might have fixed addresses, and one also needs to provide matching endpoint addresses in the descriptors sent to the host. The composite framework deals with this by assigning endpoint addresses in usb_ep_autoconfig() before enumeration starts. This approach won't work with Raw Gadget as the endpoints are supposed to be enabled after a set_configuration/set_interface request from the host, so it's too late to patch the endpoint descriptors that had already been sent to the host. For Raw Gadget we take another approach. Similarly to GadgetFS, we allow the user to make the decision as to which gadget endpoints to use. This patch adds another Raw Gadget ioctl USB_RAW_IOCTL_EPS_INFO that exposes information about all non-control endpoints that a currently connected UDC has. This information includes endpoints addresses, as well as their capabilities and limits to allow the user to choose the most fitting gadget endpoint. The USB_RAW_IOCTL_EP_ENABLE ioctl is updated to use the proper endpoint validation routine usb_gadget_ep_match_desc(). These changes affect the portability of the gadgets that use Raw Gadget when running on different UDCs. Nevertheless, as long as the user relies on the information provided by USB_RAW_IOCTL_EPS_INFO to dynamically choose endpoint addresses, UDC-agnostic gadgets can still be written with Raw Gadget. Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: gadget: add raw-gadget interfaceAndrey Konovalov2020-03-152-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB Raw Gadget is a kernel module that provides a userspace interface for the USB Gadget subsystem. Essentially it allows to emulate USB devices from userspace. Enabled with CONFIG_USB_RAW_GADGET. Raw Gadget is currently a strictly debugging feature and shouldn't be used in production. Raw Gadget is similar to GadgetFS, but provides a more low-level and direct access to the USB Gadget layer for the userspace. The key differences are: 1. Every USB request is passed to the userspace to get a response, while GadgetFS responds to some USB requests internally based on the provided descriptors. However note, that the UDC driver might respond to some requests on its own and never forward them to the Gadget layer. 2. GadgetFS performs some sanity checks on the provided USB descriptors, while Raw Gadget allows you to provide arbitrary data as responses to USB requests. 3. Raw Gadget provides a way to select a UDC device/driver to bind to, while GadgetFS currently binds to the first available UDC. 4. Raw Gadget uses predictable endpoint names (handles) across different UDCs (as long as UDCs have enough endpoints of each required transfer type). 5. Raw Gadget has ioctl-based interface instead of a filesystem-based one. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* docs: usb: remove some broken referencesMauro Carvalho Chehab2020-01-282-8/+0
| | | | | | | | | | It seems that some files were removed from USB documentation. Update the links accordingly. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/00008303fde6b4e06d027d3b76ae7032614a7030.1580193653.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* USB: rio500: Remove Rio 500 kernel driverBastien Nocera2019-10-041-109/+0
| | | | | | | | | | | | | | | | The Rio500 kernel driver has not been used by Rio500 owners since 2001 not long after the rio500 project added support for a user-space USB stack through the very first versions of usbdevfs and then libusb. Support for the kernel driver was removed from the upstream utilities in 2008: https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db Cc: Cesar Miquel <miquel@df.uba.ar> Signed-off-by: Bastien Nocera <hadess@hadess.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Move wusbcore and UWB to staging as it is obsoleteGreg Kroah-Hartman2019-08-082-587/+0
| | | | | | | | | The UWB and wusbcore code is long obsolete, so let us just move the code out of the real part of the kernel and into the drivers/staging/ location with plans to remove it entirely in a few releases. Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* docs: usb: rename files to .rst and add them to drivers-apiMauro Carvalho Chehab2019-06-2025-2/+70
| | | | | | | | | | | | | | | While there are a mix of things here, most of the stuff were written from Kernel developer's PoV. So, add them to the driver-api book. A follow up for this patch would be to move documents from there that are specific to sysadmins, adding them to the admin-guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: rio500: update DocumentationOliver Neukum2019-05-211-53/+13
| | | | | | | Added the newly added limit and updated the text a bit Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* docs: usb: convert documents to ReSTMauro Carvalho Chehab2019-04-1623-1239/+1663
| | | | | | | | | Convert USB documents to ReST, in order to prepare for adding it to the kernel API book, as most of the stuff there are driver or subsystem-related. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: add option of only authorizing internal devicesDmitry Torokhov2019-02-221-1/+3
| | | | | | | | | | | | | | | | | On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation/usb: Fix typoThiébaud Weksteen2018-11-261-1/+1
| | | | | | | Fix small typo authroized -> authorized in the authorization page. Signed-off-by: Thiébaud Weksteen <tweek@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-serial-4.19-rc1' of ↵Greg Kroah-Hartman2018-07-201-9/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.19-rc1 Here are the USB-serial updates for 4.19-rc1, including: - gpio support for CP2102N devices - improved line-speed handling for cp210x - conversion to spin_lock_irqsave() in completion handlers - dropped kl5kusb105 support from the kl5kusb105 driver (sic!) Included are also various lower-priority fixes and clean ups. All but the final commit have been in linux-next, and with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: clean up kl5kusb105 documentationJohan Hovold2018-07-111-9/+0
| | | | | | | | | | | | | | Remove references to long-gone kl5kusb105 module parameters in the usb-serial documentation. Signed-off-by: Johan Hovold <johan@kernel.org>
* | doc: usb: Fix typo in gadget_configfs documentationJaejoong Kim2018-06-181-1/+1
|/ | | | | | | Fix the directory name from 'configfs' to 'configs'. Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge 4.15-rc8 into usb-nextGreg Kroah-Hartman2018-01-151-1/+1
|\ | | | | | | | | | | We want the USB fixes in here as well for merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Documentation: usb: fix typo in UVC gadgetfs config commandBin Liu2018-01-111-1/+1
| | | | | | | | | | | | | | | | This seems to be a copy&paste error. With the fix the uvc gadget now can be created by following the instrucitons. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: remove the URB_NO_FSBR flagAlan Stern2017-12-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The URB_NO_FSBR flag has never really been used. It was introduced as a potential way for UHCI to minimize PCI bus usage (by not attempting full-speed bulk and control transfers more than once per frame), but the flag was not set by any drivers. There's no point in keeping it around. This patch simplifies the API by removing it. Unfortunately, it does have to be kept as part of the usbfs ABI, but at least we can document in include/uapi/linux/usbdevice_fs.h that it doesn't do anything. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | doc: usb: chipidea: Fix typo in 'enumerate'Fabio Estevam2017-12-081-6/+6
|/ | | | | | | Fix the spelling of 'enumerate' in this document. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation: fix usb related doc refsTom Saeger2017-10-121-1/+1
| | | | | | | Update ref to usb proc_usb_info.txt. Signed-off-by: Tom Saeger <tom.saeger@oracle.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* usb: gadget: add f_uac1 variant based on a new u_audio apiRuslan Bilovol2017-06-191-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new function 'f_uac1' (f_uac1 with virtual "ALSA card") that uses recently created u_audio API. Comparing to legacy f_uac1 function implementation it doesn't require any real Audio codec to be present on the device. In f_uac1 audio streams are simply sinked to and sourced from a virtual ALSA sound card created using u_audio API. Legacy f_uac1 approach is to write audio samples directly to existing ALSA sound card f_uac1 approach is more generic/flexible one - create an ALSA sound card that represents USB Audio function and allows to be used by userspace application that may choose to do whatever it wants with the data received from the USB Host and choose to provide whatever it wants as audio data to the USB Host. f_uac1 also has capture support (gadget->host) thanks to easy implementation via u_audio. By default, capture interface has 48000kHz/2ch configuration, same as playback channel has. f_uac1 descriptors naming convention uses f_uac2 driver naming convention that makes it more common and meaningful. Comparing to f_uac1_legacy, the f_uac1 doesn't have volume/mute functionality. This is because the f_uac1 volume/mute feature unit was dummy implementation since that driver creation (2009) and never had any real volume control or mute functionality, so there is no any difference here. Since f_uac1 functionality, exposed interface to userspace (virtual ALSA card), input parameters are so different comparing to f_uac1_legacy, that there is no any reason to keep them in the same file/module, and separate function was created. g_audio can be built using one of existing UAC functions (f_uac1, f_uac1_legacy or f_uac2) Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: function: make current f_uac1 implementation legacyRuslan Bilovol2017-06-191-4/+5
| | | | | | | | | | | Before introducing new f_uac1 function (with virtual ALSA card) make current implementation legacy. This includes renaming of existing files, some variables, config options and documentation Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 22:41:10 +0000