summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/bcm958623hr.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: NSP: Add bcm958623hr board name to dtsMatthew Hagan2021-09-141-1/+1
| | | | | | | | | | This board was previously added to Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml however the dts file was not updated to reflect this change. This patch corrects bcm958623hr.dts by adding the board name to the compatible. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: disable qspi node by defaultMatthew Hagan2021-09-141-0/+1
| | | | | | | | | The QSPI bus is enabled by default, however this may not used on all devices. This patch disables by default, requiring it to be explicitly enabled where required. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: NSP: dts: fix NAND nodes namesRafał Miłecki2021-05-101-2/+2
| | | | | | | This matches nand-controller.yaml requirements. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Provide defaults ports container nodeFlorian Fainelli2020-11-201-3/+0
| | | | | | | | | | | | | | | Provide an empty 'ports' container node with the correct #address-cells and #size-cells properties. This silences the following warning: arch/arm/boot/dts/bcm958522er.dt.yaml: ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed: 'ports' is a required property 'ethernet-ports' is a required property From schema: Documentation/devicetree/bindings/net/dsa/b53.yaml Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Disable PL330 by default, add dma-coherent propertyMatthew Hagan2020-06-151-0/+4
| | | | | | | | | | | | | | Currently the PL330 is enabled by default. However if left in IDM reset, as is the case with the Meraki and Synology NSP devices, the system will hang when probing for the PL330's AMBA peripheral ID. We therefore should be able to disable it in these cases. The PL330 is also included among of the list of peripherals put into coherent mode, so "dma-coherent" has been added here as well. Fixes: 5fa1026a3e4d ("ARM: dts: NSP: Add PL330 support") Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Fix the bulk of W=1 DTC warningsFlorian Fainelli2019-06-221-1/+1
| | | | | | | Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Move aliases to bcm-nsp.dtsiFlorian Fainelli2018-11-051-4/+0
| | | | | | | | All boards replicate the aliases node, move the aliases node to bcm-nsp.dtsi and add all the serial and ethernet ports such that a boot program like u-boot can populate MAC addresses accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Switch to port 8 for CPU portFlorian Fainelli2018-03-121-3/+3
| | | | | | | | | | | Now that we have added support for pre-pended Broadcom tags with commit 11606039604c ("net: dsa: b53: Support prepended Broadcom tags") we can switch all the Northstar Plus reference boards to use port 8 for the CPU port. This allows us to prepare room for supporting the Flow Accelerator 2 NAPT offload, and frees up port 5 to be made fully configurable for the modes that it supports: internal, SGMII, RGMII etc. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Disable AHCI controller for HR NSP boardsFlorian Fainelli2017-11-271-4/+0
| | | | | | | | | | | | The AHCI controller is currently enabled for all of these boards: bcm958623hr and bcm958625hr would result in a hard hang on boot that we cannot get rid of. Since this does not appear to have an easy and simple fix, just disable the AHCI controller for now until this gets resolved. Fixes: 70725d6e97ac ("ARM: dts: NSP: Enable SATA on bcm958625hr") Fixes: d454c3762437 ("ARM: dts: NSP: Add new DT file for bcm958623hr") Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Add USB3 and USB3 PHY to NSPJon Mason2017-08-071-0/+8
| | | | | | | | This uses the existing Northstar USB3 PHY driver to enable the USB3 ports on NSP. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2017-05-091-1/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits) ARM: dts: exynos: Use - instead of @ for DT OPP entries arm: spear6xx: add DT description of the ADC on SPEAr600 arm: spear6xx: remove unneeded pinctrl properties in spear600-evb arm: spear6xx: switch spear600-evb to the new flash partition DT binding arm: spear6xx: fix spaces in spear600-evb.dts arm: spear6xx: use node labels in spear600-evb.dts arm: spear6xx: add labels to various nodes in spear600.dtsi ARM: dts: vexpress: fix few unit address format warnings ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: armada-38x: label USB and SATA nodes ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ...
| * ARM: dts: NSP: Add EHCI/OHCI USB nodes to device treeJon Mason2017-03-181-1/+9
| | | | | | | | | | | | | | | | Add the EHCI and OHCI entries to the Northstar Plus device tree files. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* | ARM: dts: NSP: GPIO reboot open-sourceJon Mason2017-03-161-0/+1
|/ | | | | | | | | | | | | | | | | The libgpio code pre-sets the GPIO values for the gpio-reset in the device tree. This results in the device being reset during bringup. To prevent this pre-setting, use the "open-source" flag in the device tree. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Fixes: b1aaf88 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file") Fixes: 10baed1 ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file") Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er") Fixes: e3227c1 ("ARM: dts: NSP: Add new DT file for bcm958525er") Fixes: 2f8bc00 ("ARM: dts: NSP: Add new DT file for bcm958622hr") Fixes: d454c37 ("ARM: dts: NSP: Add new DT file for bcm958623hr") Fixes: f27eacf ("ARM: dts: NSP: Add new DT file for bcm988312hr") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Add and enable amac2Jon Mason2017-01-181-0/+8
| | | | | | | | | Add and enable the third AMAC ethernet interface in the device trees for the platforms where it is present. Also, enable amac1 on some of the platforms where that was missing. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Add QSPI support to missing boardsJon Mason2017-01-181-0/+34
| | | | | | | | | | QSPI device tree entries are present in bcm958625k, but missing from bcm958522er, bcm958525er, bcm958525xmc, bcm958622hr, bcm958623hr, bcm958625hr, and bcm988312hr. Duplicate the entry in bcm958625k for all of those that are missing it (as they are identical). Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: DT Clean-upsJon Mason2017-01-181-8/+8
| | | | | | | | | | | The QSPI entry was added out of the sequental order that the rest of the DTSI file is in. Move it to make it fit in properly. Also, some other entries have been added in a non-alphabetical order in the DTS files, making them different from the other NSP DTS files. Move the relevant peices to make it match. Finally, remove errant new lines. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* ARM: dts: NSP: Add new DT file for bcm958623hrJon Mason2016-08-081-0/+178
Create a new device tree file for the Broadcom Northstar Plus bcm958623hr SVK. This SVK has 2GB RAM, 5 ports Ethernet, SATA, 2 PCI slots, and 1 UART. Also, it has the ability to reboot via GPIO. To be added in the future are support for the USB and SLIC audio. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 23:41:30 +0000