summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6q-arm2.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx6qdl: don't configure reserved pad settingsUwe Kleine-König2016-08-091-12/+12
| | | | | | | | | Several dts files set a bit in the SPEED field for pads RGMII_{R,T}{XC,D0,D1,D2,D3,X_CTL}, but that doesn't exist. Writing there doesn't have an effect and the bit reads as zero. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6: tag boards that have the HW workaround for ERR006687Lucas Stach2016-06-111-0/+1
| | | | | | | | | Add the DT property to all boards that have the hardware workaround for erratum ERR006687 present. This allows the CPUidle driver to use the deep idle states, even if the FEC is active. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Use generic uart-has-rtscts DT propertyGeert Uytterhoeven2016-06-111-1/+1
| | | | | | | | | | | As of commit 1006ed7e1b258dac ("serial: imx: Use generic uart-has-rtscts DT property"), the Freescale IMX UART driver recognizes the generic "uart-has-rtscts" DT property, deprecating the vendor-specific "fsl,uart-has-rtscts" DT property. Hence replace the latter by the former in all DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dts: imx6: fix sd card gpio polarity specified in device treeDong Aisheng2015-07-241-2/+3
| | | | | | | | | | | cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.Troy Kisky2014-02-101-0/+3
| | | | | | | This works around a hardware bug. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6: use generic node name for fixed regulatorShawn Guo2014-02-091-2/+6
| | | | | | | | The device tree specification recommends that generic name should be used for nodes. So instead of naming those fixed regulator nodes arbitrarily, let's use the generic name 'regulator@num' for those nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6qdl: make pinctrl nodes board specificShawn Guo2014-02-091-12/+104
| | | | | | | | | | | | | | | | | | | Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q-arm2: enable USB OTGPeter Chen2014-02-091-0/+17
| | | | | | | Enable USB OTG controller at imx6q-arm2 board Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6qdl/imx6sl: add the dma property for uartHuang Shijie2013-08-221-2/+0
| | | | | | | | | | Add the dma property for all the uart. Note: Add the dma property does not mean we enable the dma for this uart. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: share pad macro names between imx6q and imx6dlShawn Guo2013-08-221-3/+3
| | | | | | | | | | | | | | | | | | | | | The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board design can work with either chip plugged into the socket, e.g. sabresd and sabreauto boards. We currently define pin groups in imx6q.dtsi and imx6dl.dtsi respectively because the pad macro names are different between two chips. This brings a maintenance burden on having the same label point to the same pin group defined in two places. The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs pad macro names. Then the pin groups becomes completely common between imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the long term maintenance of imx6q/dt pin settings becomes easier. Unfortunately, the change brings some dramatic diff stat, but it's all about DTS file, and the ultimate net diff stat is good. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: enable the uart2 for imx6q-arm2Huang Shijie2013-08-221-0/+10
| | | | | | | | enable the uart2 for imx6q-arm2 board. The uart2 works in the DTE mode, with the RTS/CTS and DMA enabled. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* pinctrl: imx: move hard-coding data into device treeShawn Guo2013-04-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: imx: use #include for all device treesShawn Guo2013-04-091-1/+1
| | | | | | | | | | | | Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: add dtsi for imx6q and imx6dlShawn Guo2013-02-101-1/+1
| | | | | | | | | | | | | | Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: rename imx6q.dtsi to imx6qdl.dtsiShawn Guo2013-02-101-1/+1
| | | | | | | | | | | | i.MX6 Quad and i.MX6 DualLite is similar enough to share one dtsi file, so rename imx6q.dtsi to imx6qdl.dtsi preparing for the addition of imx6dl support. Another member of i.MX6 series i.MX6 SoloLite is different enough from the other two, so it will stand as a separate dtsi. That's why we rename to imx6qdl.dtsi not imx6.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: use nodes label in board dtsShawn Guo2013-02-101-65/+59
| | | | | | | | | Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'Shawn Guo2012-10-161-1/+9
| | | | | | | | | | | | | | | | | | Commit 9e3c0066 (ARM: dts: imx6q-arm2: add pinctrl for uart and enet) defines NANDF_CS pins as gpio in 'hog', assuming these two pins are always used by usdhc3 in gpio mode as card-detection and write-protection on ARM2 board. But it's not true. These pins are shared by usdhc3 and gpmi-nand. We should have the pins functional for gpmi-nand when usdhc3 is disabled. Move the pins out of 'hog', so that pins only work in gpio mode as CD and WP when usdhc3 is enabled, and otherwise they are available for gpmi-nand. Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: dts: imx6q-arm2: add pinctrl for uart and enetShawn Guo2012-09-111-0/+21
| | | | | | Add missing pinctrl of uart and enet for imx6q-arm2 board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx6q: add DT node for gpmi nandHuang Shijie2012-07-021-0/+6
| | | | | | | | | | | | | Add the DT node for gpmi nand. Add the pinmux support for gpmi nand. The gpmi nand may conflicts with other modules, such as MMC. So we do not enable the gpmi nand for mx6q-arm2 board, just add the node for the board. Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge branch 'drivers/mmc' into next/dt2Arnd Bergmann2012-05-151-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Changes in the dt2 branch move stuff around that gets changed in the drivers/mmc branch. I chose a non-obvious resolution by adding the new bus-width property into all the tegra sdhci device nodes. Conflicts: arch/arm/boot/dts/tegra-cardhu.dts arch/arm/boot/dts/tegra-harmony.dts arch/arm/boot/dts/tegra-ventana.dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * mmc: dt: Consolidate DT bindingsArnd Bergmann2012-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | ARM: dts: imx6q-arm2: add pinctrl state for usdhcDong Aisheng2012-05-111-0/+4
| | | | | | | | | | Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: imx6q-arm2: Remove hardcoded mac addressFabio Estevam2012-05-111-1/+0
| | | | | | | | | | | | | | | | | | Do not hardcode the local mac address. Let bootloader retrieve it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: imx: rename uart and fec device tree nodesShawn Guo2012-05-111-2/+2
| | | | | | | | | | | | | | | | | | | | It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: dts: imx: Remove bootargs fieldFabio Estevam2012-05-111-4/+0
|/ | | | | | | Remove bootargs field as this information is retrieved from the bootloader. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q-arm2: add vmmc-supply for usdhcShawn Guo2012-02-271-0/+14
| | | | Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* arm/imx6q: Rename Sabreauto to Armadillo2Dirk Behme2011-12-141-0/+62
The Sabreauto board was renamed to Armadillo2 recently. To avoid confusion, rename Sabreauto to Armadillo2/arm2. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>