summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/sleep34xx.S
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: drop unnecessary adrlStefan Agner2020-04-211-1/+1
| | | | | | | | | | | | | | | The adrl instruction has been introduced with commit dd31394779aa ("ARM: omap3: Thumb-2 compatibility for sleep34xx.S"), back when this assembly file was considerably longer. Today adr seems to have enough reach, even when inserting about 60 instructions between the use site and the label. Replace adrl with conventional adr instruction. This allows to build this file using Clang's integrated assembler (which does not support the adrl pseudo instruction). Link: https://github.com/ClangBuiltLinux/linux/issues/430 Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: use arch_extension directive instead of arch argumentStefan Agner2019-06-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LLVM Target parser currently does not allow to specify the security extension as part of -march (see also LLVM Bug 40186 [0]). When trying to use Clang with LLVM's integrated assembler, this leads to build errors such as this: clang-8: error: the clang compiler does not support '-Wa,-march=armv7-a+sec' Use ".arch_extension sec" to enable the security extension in a more portable fasion. Also make sure to use ".arch armv7-a" in case a v6/v7 multi-platform kernel is being built. Note that this is technically not exactly the same as the old code checked for availabilty of the security extension by calling as-instr. However, there are already other sites which use ".arch_extension sec" unconditionally, hence de-facto we need an assembler capable of ".arch_extension sec" already today (arch/arm/mm/proc-v7.S). The arch extension "sec" is available since binutils 2.21 according to its documentation [1]. [0] https://bugs.llvm.org/show_bug.cgi?id=40186 [1] https://sourceware.org/binutils/docs-2.21/as/ARM-Options.html Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Mans Rullgard <mans@mansr.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner2019-05-301-15/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_contextTony Lindgren2017-11-281-22/+4
| | | | | | | | | | | | | | | | | | | | | | | With the CMA changes from Joonsoo Kim <iamjoonsoo.kim@lge.com>, it was noticed that n900 stopped booting. After investigating it turned out that n900 save_secure_ram_context does some whacky virtual to physical address translation for the SRAM data address. As we now only have minimal parts of omap3 idle code copied to SRAM, running save_secure_ram_context() in SRAM is not needed. It only gets called on PM init. And it seems there's no need to ever call this from SRAM idle code. So let's just keep save_secure_ram_context() in DDR, and pass it the physical address of the parameters. We can do everything else in omap-secure.c like we already do for other secure code. And since we don't have any documentation, I still have no clue what the values for 0, 1 and 1 for the parameters might be. If somebody has figured it out, please do send a patch to add some comments. Debugged-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: align .data sectionRussell King2017-08-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Robert Jarzmik reports that his PXA25x system fails to boot with 4.12, failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215: 0xc0019e20 <+0>: ldr r1, [pc, #788] 0xc0019e24 <+4>: ldr r0, [r1] <== here with r1 containing 0xc06f82cd, which is the address of "clean_addr". Examination of the System.map shows: c06f22c8 D user_pmd_table c06f22cc d __warned.19178 c06f22cd d clean_addr indicating that a .data.unlikely section has appeared just before the .data section from proc-xscale.S. According to objdump -h, it appears that our assembly files default their .data alignment to 2**0, which is bad news if the preceding .data section size is not power-of-2 aligned at link time. Add the appropriate .align directives to all assembly files in arch/arm that are missing them where we require an appropriate alignment. Reported-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* ARM: OMAP2+: Fix l2_inv_api_params for rodataTony Lindgren2016-01-221-3/+9
| | | | | | | | | | | | | | | | | We don't want to write to .text, so let's move l2_inv_api_params to .data and access it via a pointer. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Fix save_secure_ram_context for rodataTony Lindgren2016-01-221-2/+8
| | | | | | | | | | | | | | | | | | We don't want to write to .text and we can move save_secure_ram_context into .data as it all gets copied into SRAM anyways. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Fix l2dis_3630 for rodataTony Lindgren2016-01-221-4/+13
| | | | | | | | | | | | | | | | | | | | | We don't want to write to .text section. Let's move l2dis_3630 to .data and access it via a pointer. For calculating the offset, let's optimize out the add and do it in ldr/str as suggested by Nicolas Pitre <nicolas.pitre@linaro.org>. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Cc: stable@vger.kernel.org # v4.0+ Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Fix wait_dll_lock_timed for rodataTony Lindgren2016-01-221-22/+0
| | | | | | | | | | | | | | | | | | | | | We don't want to be writing to .text so it can be set rodata. Fix error "Unable to handle kernel paging request at virtual address c012396c" in wait_dll_lock_timed if CONFIG_DEBUG_RODATA is selected. As these counters are for debugging only and unused, we can just remove them. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # v4.0+ Fixes: 1e6b48116a95 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP3: Fix booting with thumb2 kernelTony Lindgren2015-05-281-20/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We get a NULL pointer dereference on omap3 for thumb2 compiled kernels: Internal error: Oops: 80000005 [#1] SMP THUMB2 ... [<c046497b>] (_raw_spin_unlock_irqrestore) from [<c0024375>] (omap3_enter_idle_bm+0xc5/0x178) [<c0024375>] (omap3_enter_idle_bm) from [<c0374e63>] (cpuidle_enter_state+0x77/0x27c) [<c0374e63>] (cpuidle_enter_state) from [<c00627f1>] (cpu_startup_entry+0x155/0x23c) [<c00627f1>] (cpu_startup_entry) from [<c06b9a47>] (start_kernel+0x32f/0x338) [<c06b9a47>] (start_kernel) from [<8000807f>] (0x8000807f) The power management related assembly on omaps needs to interact with ARM mode bootrom code, so we need to keep most of the related assembly in ARM mode. Turns out this error is because of missing ENDPROC for assembly code as suggested by Stephen Boyd <sboyd@codeaurora.org>. Let's fix the problem by adding ENDPROC in two places to sleep34xx.S. Let's also remove the now duplicate custom code for mode switching. This has been unnecessary since commit 6ebbf2ce437b ("ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+"). And let's also remove the comments about local variables, they are now just confusing after the ENDPROC. The reason why ENDPROC makes a difference is it sets .type and then the compiler knows what to do with the thumb bit as explained at: https://wiki.ubuntu.com/ARM/Thumb2PortingHowto Reported-by: Kevin Hilman <khilman@kernel.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3-signed' of ↵Arnd Bergmann2012-11-121-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/headers From Tony Lindgren <tony@atomide.com>: These changes deal with the issues of relative includes introduced by the earlier clean-up and clean up few more things for enabling multiplatform support. The multiplatform kernel has been booted on omaps on top of this branch with the work-in-progress patches applied manually. We cannot yet enable the multiplatform support though. We still need the common clock framework patches, some solution for dma-omap.h, and serial-omap.h moved before we can enable it. * tag 'omap-for-v3.8/cleanup-headers-prepare-multiplatform-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Remove omap_init_consistent_dma_size() ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ARM: OMAP2+: Fix relative includes for serial.h ARM: OMAP: Fix relative includes for fpga.h ARM: OMAP1: Remove relative includes ARM: OMAP: Remove cpu_is_omap usage from plat-omap/dma.c ARM: OMAP: Fix relative includes for debug-devices.h ARM: OMAP: Remove plat-omap/common.h ARM: OMAP: Move omap-pm-noop.c local to mach-omap2 ARM: OMAP: Fix relative includes for shared i2c.h file ARM: OMAP: Make plat-omap/i2c.c port checks local ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2 ARM: OMAP: Move omap1 specific code to local sram.c ARM: OMAP: Introduce common omap_map_sram() and omap_sram_reset() ARM: OMAP: Split sram.h to local headers and minimal shared header ARM: OMAP1: usb: fix sparse warnings Conflicts: arch/arm/mach-omap2/cm33xx.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: OMAP: Split sram.h to local headers and minimal shared headerTony Lindgren2012-10-311-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the defines are specific to omap1 and omap2+, and should be in the local headers. Only minimal function prototypes need to be shared. As discussed on linux-arm-kernel, we want to avoid relative includes for the arch/arm/*omap* shared code: http://www.spinics.net/lists/linux-omap/msg80520.html So this patch re-adds a minimal plat/sram.h. The new plat/sram.h must not be included from drivers, that will break build for omap2+ CONFIG_MULTIPLATFORM. Note that this patch temporarily adds two more relative includes; Those will be removed in the following patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'omap-cleanup-a-for-3.8' of ↵Tony Lindgren2012-10-241-2/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8/cleanup-prcm The first set of OMAP PRM/CM-related cleanup patches for 3.8. Prepares for the future move of the PRM/CM code to drivers/. Also includes some prcm.[ch] cleanup patches from the WDTIMER cleanup series that don't need external acks. Basic test logs for this branch on top of v3.7-rc2 are here: http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121021123719/ But due to the number of unrelated regressions present in v3.7-rc[12], it's not particularly usable as a testing base. With reverts, fixes, and workarounds applied as documented in: http://www.pwsan.com/omap/testlogs/test_v3.7-rc2/20121020134755/README.txt the following test logs were obtained: http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121020231757/ which indicate that the series tests cleanly. Conflicts: arch/arm/mach-omap2/Makefile arch/arm/mach-omap2/clockdomain2xxx_3xxx.c arch/arm/mach-omap2/pm24xx.c
| * ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific filesPaul Walmsley2012-10-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
| * ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific filesPaul Walmsley2012-10-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created by a subsequent patch when it's needed.) Move basic PRM register access functions into static inline functions in prm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in prm2xxx_3xxx.c. Also clarify the initcall function naming to reinforce that this code is specifically for the PRM IP block. This is in preparation for the upcoming powerdomain series and the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* | ARM: OMAP: Make plat/sram.h local to plat-omapTony Lindgren2012-10-171-1/+1
|/ | | | | | | We can move this from plat to be local to plat-omap for common ARM zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2Tony Lindgren2012-09-121-1/+1
| | | | | | | | | | These can now be moved to be local headers in mach-omap2. Note that this patch removes arch/arm/plat-omap/devices.c as it will get removed anyways with Paul Walmsley's patch "ARM: OMAP: split OMAP1, OMAP2+ RNG device registration". Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren2012-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.hTony Lindgren2012-02-241-0/+1
| | | | | | | | | | | | | This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Move most of plat/io.h into local iomap.hTony Lindgren2012-02-241-1/+3
| | | | | | | | | | | | There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: pm: omap3: move saving of the auxiliary control registers to CRussell King2011-06-301-10/+2
| | | | | | | | | | | | Move the saving of the auxiliary control registers into C; there's no need for this to be in assembly code. This results in less assembly code to deal with in OMAP. Kevin tested full-chip retention and off on 3430/n900, 3530/Overo and 3630/Zoom3. Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pm: omap3: run the ASM sleep code from DDRJean Pihet2011-06-291-128/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the ASM sleep code (in arch/arm/mach-omap2/sleep34xx.S) is copied to internal SRAM at boot and after wake-up from CORE OFF mode. However only a small part of the code really needs to run from internal SRAM. This fix lets most of the ASM idle code run from the DDR in order to minimize the SRAM usage and the overhead in the code copy. The only pieces of code that are mandatory in SRAM are: - the i443 erratum WA, - the i581 erratum WA, - the security extension code. SRAM usage: - original code: . 560 bytes for omap3_sram_configure_core_dpll (used by DVFS), . 852 bytes for omap_sram_idle (used by suspend/resume in RETention), . 124 bytes for es3_sdrc_fix (used by suspend/resume in OFF mode on ES3.x), . 108 bytes for save_secure_ram_context (used on HS parts only). With this fix the usage for suspend/resume in RETention goes down 288 bytes, so the gain in SRAM usage for suspend/resume is 564 bytes. Also fixed the SRAM initialization sequence to avoid an unnecessary copy to SRAM at boot time and for readability. Tested on Beagleboard (ES2.x) in idle with full RET and OFF modes. Kevin Hilman tested retention and off on 3430/n900, 3530/Overo and 3630/Zoom3 Signed-off-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pm: omap34xx: remove get_*_restore_pointer functions, directly use ↵Kevin Hilman2011-06-241-46/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | entry points Upon return from off-mode, the ROM code jumps to a restore function saved in the scratchpad. Based on SoC revision or errata, this restore entry point is different. Current code uses some helper functions in sleep34xx.S (get_*_restore_pointer) to get the restore function entry point. When returning from off-mode, this code is executed from SDRAM, so there's no reason to use these helper functions when using the SDRAM entry points directly would work just fine. This patch uses ENTRY/ENDPROC to create "real" entry points for these functions, and uses those values directly when writing the scratchpad. Tested all three entry points - restore_es3: 3430/n900 - restore_3630: 3630/Zoom3 - restore: 3530/Overo Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pm: omap34xx: convert to generic suspend/resume supportRussell King2011-06-241-140/+3
| | | | | | | | | | Convert omap34xx to use the generic CPU suspend/resume support, rather than implementing its own version. Tested on 3430 LDP. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pm: omap34xx: remove misleading comment and use of r9Russell King2011-06-241-7/+2
| | | | | | | | | | | | | | | The code alludes to r9 being used to indicate what was lost over the suspend/resume transition. However, although r9 is set, it is never actually used. Also, the comments before the code (which refer to the value of r9) and the comments against the assignment of r9 contradict each other, so just remove them to avoid confusion. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: pm: omap34xx: no need to save all registers in sleep34xx.SRussell King2011-06-241-5/+5
| | | | | | | | | | | | The ABI allows called functions to corrupt r0-r3 and ip (r12). So its pointless saving these registers in the suspend code - the calling function will expect them to be corrupted and so won't rely on their contents after resume. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-03-171-149/+133
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
| * OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocationSantosh Shilimkar2011-03-101-0/+27
| | | | | | | | | | | | | | | | | | | | | | On the newer ARM processors like CortexA8, CortexA9, the caches can be speculatively loaded while they are getting flushed. Clear the SCTLR C bit to prevent further data cache allocation as part of cache clean routine Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * OMAP3: PM: Remove un-necessary cp15 registers form low power cpu contextSantosh Shilimkar2011-03-101-116/+40
| | | | | | | | | | | | | | | | | | | | | | The current code saves few un-necessary registers which are read-only or write-only, unused CP15 registers. Remove them and keep only necessary CP15 registers part of low power context save/restore. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * OMAP3: PM: Allow the cache clean when L1 is lost.Santosh Shilimkar2011-03-101-12/+3
| | | | | | | | | | | | | | | | | | | | | | When L1 cache is suppose to be lost, it needs to be cleaned before entrering to the low power mode. While at this, also fix few comments and remove un-necessary clean_l2 lable. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * OMAP3: PM: Fix the MMU on sequence in the asm codeSantosh Shilimkar2011-03-101-0/+5
| | | | | | | | | | | | | | | | Add necessary barriers after enabling MMU. Also use the sane way to load pc and jump to it instead of executing ldma first up. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * OMAP3: PM: Use ARMv7 supported instructions instead of legacy CP15 onesSantosh Shilimkar2011-03-101-11/+10
| | | | | | | | | | | | | | | | | | On ARMv7 dsb, dmb instructions are supported and can be used directly instead of their cp15 equivalnet. Also remove the opcodes for smc and use the available instruction directly in OMAP3 low power asm code Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * ARM: omap3: Thumb-2 compatibility for sleep34xx.SDave Martin2011-03-091-5/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Build unconditionally as ARM for correct interoperation with OMAP firmware. * Fix an out-of-range ADR when building for ARM. * Remove deprecated PC-relative stores. * Add the required ENDPROC() directive for each ENTRY(). * .align before data words. * Handle non-interworking return from v7_flush_dcache_all. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * ARM: omap3: Remove hand-encoded SMC instructionsDave Martin2011-03-091-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For various reasons, Linux now only officially supports being built with tools which are new enough to understand the SMC instruction. Replacing the hand-encoded instructions when the mnemonic also allows for correct assembly in Thumb-2 (otherwise, the result is random data in the middle of the code). The Makefile already ensures that this file is built with a high enough gcc -march= flag (armv7-a). Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAMJean Pihet2011-02-041-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | The new fncpy API is better suited* for copying some code to SRAM at runtime. This patch changes the ad-hoc code to the more generic fncpy API. *: 1. fncpy ensures that the thumb mode bit is propagated, 2. fncpy provides the security of type safety between the original function and the sram function pointer. Tested OK on OMAP3 in low power modes (RET/OFF) using omap2plus_defconfig with !CONFIG_THUMB2_KERNEL. Compile tested on OMAP1/2 using omap1_defconfig. Boot tested on OMAP1 & OMAP2 Tested OK with suspend/resume on OMAP2420/n810 Boots fine on osk5912 and n800 Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Dave Martin <dave.martin@linaro.org> Tested-by: Kevin Hilman <khilman@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley2010-12-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* OMAP3: ASM sleep code format reworkJean Pihet2010-12-211-107/+117
| | | | | | | | | | | | | | | | Cosmetic fixes to the code: - white spaces and tabs, - alignement, - comments rephrase and typos, - multi-line comments Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: add comments for low power code errataJean Pihet2010-12-211-0/+11
| | | | | | | | | | | | | | | Errata covered: - 1.157 & 1.185 - i443 - i581 Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: rework of the ASM sleep code execution pathsJean Pihet2010-12-211-131/+187
| | | | | | | | | | | | | | | | - Reworked and simplified the execution paths for better readability and to avoid duplication of code, - Added comments on the entry and exit points and the interaction with the ROM code for OFF mode restore, - Reworked the existing comments for better readability. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: re-organize the ASM sleep codeJean Pihet2010-12-211-53/+61
| | | | | | | | | | | | | | | Organize the code in the following sections: - register access macros, - API functions, - internal functions. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: remove hardcoded values from the ASM sleep codeJean Pihet2010-12-211-11/+18
| | | | | | | | | | | | | | | Using macros from existing include files for registers addresses. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Based on original patch from Vishwa. Signed-off-by: Jean Pihet <j-pihet@ti.com> Cc: Vishwanath BS <vishwanath.bs@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP2+: use global values for the SRAM PA addressesJean Pihet2010-12-211-0/+1
| | | | | | | | | | | | | | | | The SRAM PA addresses are locally defined and used at different places, i.e. SRAM management code and idle sleep code. The macros are now defined at a centralized place, for easier maintenance. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: remove unused code from the ASM sleep codeJean Pihet2010-12-211-52/+6
| | | | | | | | | | | | | | | | | | Remove unused code: - macros, - variables, - unused semaphore locking API. This API shall be added back when needed, - infinite loops for debug. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3630: PM: Disable L2 cache while invalidating L2 cachePeter 'p2' De Schrijver2010-12-211-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | While coming out of MPU OSWR/OFF states, L2 controller is reseted. The reset behavior is implementation specific as per ARMv7 TRM and hence $L2 needs to be invalidated before it's use. Since the AUXCTRL register is also reconfigured, disable L2 cache before invalidating it and re-enables it afterwards. This is as per Cortex-A8 ARM documentation. Currently this is identified as being needed on OMAP3630 as the disable/enable is done from "public side" while, on OMAP3430, this is done in the "secure side". Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [nm@ti.com: ported to 2.6.37-rc2, added hooks to enable the logic only on 3630] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3630: PM: Erratum i608: disable RTANishanth Menon2010-12-211-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | Erratum id: i608 RTA (Retention Till Access) feature is not supported and leads to device stability issues when enabled. This impacts modules with embedded memories on OMAP3630 Workaround is to disable RTA on boot and coming out of core off. For disabling RTA coming out of off mode, we do this by overriding the restore pointer for 3630 as the first point of entry before caches are touched and is common for GP and HS devices. To disable earlier than this could be possible by modifying the PPA for HS devices, but not for GP devices. Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [ambresh@ti.com: co-developer] Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: PM: Erratum i581 support: dll kick strategyPeter 'p2' De Schrijver2010-12-211-5/+50
| | | | | | | | | | | | | | | | | | | | | | | | | Erratum i581 impacts OMAP3 platforms. PRCM DPLL control FSM removes SDRC_IDLEREQ before DPLL3 locks causing the DPLL not to be locked at times. IMPORTANT: *) This is not a complete workaround implementation as recommended by the silicon erratum. This is a support logic for detecting lockups and attempting to recover where possible and is known to provide stability in multiple platforms. *) This code is mostly important for inactive and retention. The ROM code waits for the maximum DLL lock time when resuming from off mode. So for off mode this code isn't really needed. *) counters are introduced here for eventual export to userspace once the cleanups are completed. This should eventually get refactored as part of cleanups to sleep34xx.S Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: PM: Update clean_l2 to use v7_flush_dcache_allRichard Woodruff2010-12-211-66/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Analysis in TI kernel with ETM showed that using cache mapped flush in kernel instead of SO mapped flush cost drops by 65% (3.39mS down to 1.17mS) for clean_l2 which is used during sleep sequences. Overall: - speed up - unfortunately there isn't a good alternative flush method today - code reduction and less maintenance and potential bug in unmaintained code This also fixes the bug with the clean_l2 function usage. Reported-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> [nm@ti.com: ported rkw's proposal to 2.6.37-rc2] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley2010-10-081-1/+1
| | | | | | | | | | | | | | | | | Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
* fix typos concerning "acquire"Uwe Kleine-König2010-06-161-1/+1
| | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* OMAP3: PM: Added support for L2 aux ctrl register save and restoreTero Kristo2010-02-231-2/+24
| | | | | | | | | | | | | | | | | This patch adds a save and restore mechanism for ARM L2 auxiliary control register. The feature is enabled by default for GP devices, but for HS/EMU devices the user must enable the service and define the PPA service ID to be used for setting L2 aux ctrl, as this is not currently supported by the bootloader. If nobody alters the contents of L2 aux ctrl from its reset value, this feature is not needed. Kconfig option to enable HS/EMU L2 aux save and restore: - OMAP3_L2_AUX_SECURE_SAVE_RESTORE Kconfig option to select HS/EMU PPA service for setting L2 aux ctrl: - OMAP3_L2_AUX_SECURE_SERVICE_SET_ID Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 16:57:48 +0000