summaryrefslogtreecommitdiffstats
path: root/block/bfq-cgroup.c
Commit message (Collapse)AuthorAgeFilesLines
* blkcg: Restructure blkg_conf_prep() and friendsTejun Heo2023-04-131-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to support lazy init of rq-qos policies so that iolatency is enabled lazily on configuration instead of gendisk initialization. The way blkg config helpers are structured now is a bit awkward for that. Let's restructure: * blkcg_conf_open_bdev() is renamed to blkg_conf_open_bdev(). The blkcg_ prefix was used because the bdev opening step is blkg-independent. However, the distinction is too subtle and confuses more than helps. Let's switch to blkg prefix so that it's consistent with the type and other helper names. * struct blkg_conf_ctx now remembers the original input string and is always initialized by the new blkg_conf_init(). * blkg_conf_open_bdev() is updated to take a pointer to blkg_conf_ctx like blkg_conf_prep() and can be called multiple times safely. Instead of modifying the double pointer to input string directly, blkg_conf_open_bdev() now sets blkg_conf_ctx->body. * blkg_conf_finish() is renamed to blkg_conf_exit() for symmetry and now must be called on all blkg_conf_ctx's which were initialized with blkg_conf_init(). Combined, this allows the users to either open the bdev first or do it altogether with blkg_conf_prep() which will help implementing lazy init of rq-qos policies. blkg_conf_init/exit() will also be used implement synchronization against device removal. This is necessary because iolat / iocost are configured through cgroupfs instead of one of the files under /sys/block/DEVICE. As cgroupfs operations aren't synchronized with block layer, the lazy init and other configuration operations may race against device removal. This patch makes blkg_conf_init/exit() used consistently for all cgroup-orginating configurations making them a good place to implement explicit synchronization. Users are updated accordingly. No behavior change is intended by this patch. v2: bfq wasn't updated in v1 causing a build error. Fixed. v3: Update the description to include future use of blkg_conf_init/exit() as synchronization points. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yu Kuai <yukuai1@huaweicloud.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230413000649.115785-3-tj@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* blk-cgroup: delete cpd_init_fn of blkcg_policyChengming Zhou2023-04-061-8/+2
| | | | | | | | | | | | | blkcg_policy cpd_init_fn() is used to just initialize some default fields of policy data, which is enough to do in cpd_alloc_fn(). This patch delete the only user bfq_cpd_init(), and remove cpd_init_fn from blkcg_policy. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-4-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: remove BFQ_WEIGHT_LEGACY_DFLChengming Zhou2023-04-061-3/+1
| | | | | | | | | | | | | BFQ_WEIGHT_LEGACY_DFL is the same as CGROUP_WEIGHT_DFL, which means we don't need cpd_bind_fn() callback to update default weight when attached to a hierarchy. This patch remove BFQ_WEIGHT_LEGACY_DFL and cpd_bind_fn(). Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-2-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linuxLinus Torvalds2023-02-201-50/+55
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block updates from Jens Axboe: - NVMe updates via Christoph: - Small improvements to the logging functionality (Amit Engel) - Authentication cleanups (Hannes Reinecke) - Cleanup and optimize the DMA mapping cod in the PCIe driver (Keith Busch) - Work around the command effects for Format NVM (Keith Busch) - Misc cleanups (Keith Busch, Christoph Hellwig) - Fix and cleanup freeing single sgl (Keith Busch) - MD updates via Song: - Fix a rare crash during the takeover process - Don't update recovery_cp when curr_resync is ACTIVE - Free writes_pending in md_stop - Change active_io to percpu - Updates to drbd, inching us closer to unifying the out-of-tree driver with the in-tree one (Andreas, Christoph, Lars, Robert) - BFQ update adding support for multi-actuator drives (Paolo, Federico, Davide) - Make brd compliant with REQ_NOWAIT (me) - Fix for IOPOLL and queue entering, fixing stalled IO waiting on timeouts (me) - Fix for REQ_NOWAIT with multiple bios (me) - Fix memory leak in blktrace cleanup (Greg) - Clean up sbitmap and fix a potential hang (Kemeng) - Clean up some bits in BFQ, and fix a bug in the request injection (Kemeng) - Clean up the request allocation and issue code, and fix some bugs related to that (Kemeng) - ublk updates and fixes: - Add support for unprivileged ublk (Ming) - Improve device deletion handling (Ming) - Misc (Liu, Ziyang) - s390 dasd fixes (Alexander, Qiheng) - Improve utility of request caching and fixes (Anuj, Xiao) - zoned cleanups (Pankaj) - More constification for kobjs (Thomas) - blk-iocost cleanups (Yu) - Remove bio splitting from drivers that don't need it (Christoph) - Switch blk-cgroups to use struct gendisk. Some of this is now incomplete as select late reverts were done. (Christoph) - Add bvec initialization helpers, and convert callers to use that rather than open-coding it (Christoph) - Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin, Matthew, Ulf, Zhong) * tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits) brd: use radix_tree_maybe_preload instead of radix_tree_preload block: use proper return value from bio_failfast() block: bio-integrity: Copy flags when bio_integrity_payload is cloned block: Fix io statistics for cgroup in throttle path brd: mark as nowait compatible brd: check for REQ_NOWAIT and set correct page allocation mask brd: return 0/-error from brd_insert_page() block: sync mixed merged request's failfast with 1st bio's Revert "blk-cgroup: pin the gendisk in struct blkcg_gq" Revert "blk-cgroup: pass a gendisk to blkg_lookup" Revert "blk-cgroup: delay blk-cgroup initialization until add_disk" Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release" Revert "blk-cgroup: move the cgroup information to struct gendisk" nvme-pci: remove iod use_sgls nvme-pci: fix freeing single sgl block: ublk: check IO buffer based on flag need_get_data s390/dasd: Fix potential memleak in dasd_eckd_init() s390/dasd: sort out physical vs virtual pointers usage block: Remove the ALLOC_CACHE_SLACK constant block: make kobj_type structures constant ...
| * Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"Christoph Hellwig2023-02-141-3/+3
| | | | | | | | | | | | | | | | This reverts commit 84d7d462b16dd5f0bf7c7ca9254bf81db2c952a2. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230214183308.1658775-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * Revert "blk-cgroup: move the cgroup information to struct gendisk"Christoph Hellwig2023-02-141-2/+2
| | | | | | | | | | | | | | | | | | This reverts commit 3f13ab7c80fdb0ada86a8e3e818960bc1ccbaa59 as a patch it depends on caused a few problems. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230214183308.1658775-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: cleanup 'bfqg->online'Yu Kuai2023-02-071-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit dfd6200a0954 ("blk-cgroup: support to track if policy is online"), there is no need to do this again in bfq. However, 'pd->online' is not protected by 'bfqd->lock', in order to make sure bfq won't see that 'pd->online' is still set after bfq_pd_offline(), clear it before bfq_pd_offline() is called. This is fine because other polices doesn't use 'pd->online' and bfq_pd_offline() will move active bfqq to root cgroup anyway. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230202134913.2364549-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * blk-cgroup: move the cgroup information to struct gendiskChristoph Hellwig2023-02-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | cgroup information only makes sense on a live gendisk that allows file system I/O (which includes the raw block device). So move over the cgroup related members. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-20-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * blk-cgroup: pass a gendisk to pd_alloc_fnChristoph Hellwig2023-02-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | No need to the request_queue here, pass a gendisk and extract the node ids from that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * blk-cgroup: pass a gendisk to blkcg_{de,}activate_policyChristoph Hellwig2023-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | Prepare for storing the blkcg information in the gendisk instead of the request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * blk-cgroup: pin the gendisk in struct blkcg_gqChristoph Hellwig2023-02-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently each blkcg_gq holds a request_queue reference, which is what is used in the policies. But a lot of these interfaces will move over to use a gendisk, so store a disk in struct blkcg_gq and hold a reference to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Herrmann <aherrmann@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230203150400.3199230-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: inject I/O to underutilized actuatorsDavide Zini2023-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The main service scheme of BFQ for sync I/O is serving one sync bfq_queue at a time, for a while. In particular, BFQ enforces this scheme when it deems the latter necessary to boost throughput or to preserve service guarantees. Unfortunately, when BFQ enforces this policy, only one actuator at a time gets served for a while, because each bfq_queue contains I/O only for one actuator. The other actuators may remain underutilized. Actually, BFQ may serve (inject) extra I/O, taken from other bfq_queues, in parallel with that of the in-service queue. This injection mechanism may provide the ground for dealing also with the above actuator-underutilization problem. Yet BFQ does not take the actuator load into account when choosing which queue to pick extra I/O from. In addition, BFQ may happen to inject extra I/O only when the in-service queue is temporarily empty. In view of these facts, this commit extends the injection mechanism in such a way that the latter: (1) takes into account also the actuator load; (2) checks such a load on each dispatch, and injects I/O for an underutilized actuator, if there is one and there is I/O for it. To perform the check in (2), this commit introduces a load threshold, currently set to 4. A linear scan of each actuator is performed, until an actuator is found for which the following two conditions hold: the load of the actuator is below the threshold, and there is at least one non-in-service queue that contains I/O for that actuator. If such a pair (actuator, queue) is found, then the head request of that queue is returned for dispatch, instead of the head request of the in-service queue. We have set the threshold, empirically, to the minimum possible value for which an actuator is fully utilized, or close to be fully utilized. By doing so, injected I/O 'steals' as few drive-queue slots as possibile to the in-service queue. This reduces as much as possible the probability that the service of I/O from the in-service bfq_queue gets delayed because of slot exhaustion, i.e., because all the slots of the drive queue are filled with I/O injected from other queues (NCQ provides for 32 slots). This new mechanism also counters actuator underutilization in the case of asymmetric configurations of bfq_queues. Namely if there are few bfq_queues containing I/O for some actuators and many bfq_queues containing I/O for other actuators. Or if the bfq_queues containing I/O for some actuators have lower weights than the other bfq_queues. Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Davide Zini <davidezini2@gmail.com> Link: https://lore.kernel.org/r/20230103145503.71712-8-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: split sync bfq_queues on a per-actuator basisPaolo Valente2023-01-291-42/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Single-LUN multi-actuator SCSI drives, as well as all multi-actuator SATA drives appear as a single device to the I/O subsystem [1]. Yet they address commands to different actuators internally, as a function of Logical Block Addressing (LBAs). A given sector is reachable by only one of the actuators. For example, Seagate’s Serial Advanced Technology Attachment (SATA) version contains two actuators and maps the lower half of the SATA LBA space to the lower actuator and the upper half to the upper actuator. Evidently, to fully utilize actuators, no actuator must be left idle or underutilized while there is pending I/O for it. The block layer must somehow control the load of each actuator individually. This commit lays the ground for allowing BFQ to provide such a per-actuator control. BFQ associates an I/O-request sync bfq_queue with each process doing synchronous I/O, or with a group of processes, in case of queue merging. Then BFQ serves one bfq_queue at a time. While in service, a bfq_queue is emptied in request-position order. Yet the same process, or group of processes, may generate I/O for different actuators. In this case, different streams of I/O (each for a different actuator) get all inserted into the same sync bfq_queue. So there is basically no individual control on when each stream is served, i.e., on when the I/O requests of the stream are picked from the bfq_queue and dispatched to the drive. This commit enables BFQ to control the service of each actuator individually for synchronous I/O, by simply splitting each sync bfq_queue into N queues, one for each actuator. In other words, a sync bfq_queue is now associated to a pair (process, actuator). As a consequence of this split, the per-queue proportional-share policy implemented by BFQ will guarantee that the sync I/O generated for each actuator, by each process, receives its fair share of service. This is just a preparatory patch. If the I/O of the same process happens to be sent to different queues, then each of these queues may undergo queue merging. To handle this event, the bfq_io_cq data structure must be properly extended. In addition, stable merging must be disabled to avoid loss of control on individual actuators. Finally, also async queues must be split. These issues are described in detail and addressed in next commits. As for this commit, although multiple per-process bfq_queues are provided, the I/O of each process or group of processes is still sent to only one queue, regardless of the actuator the I/O is for. The forwarding to distinct bfq_queues will be enabled after addressing the above issues. [1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/ Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Gabriele Felici <felicigb@gmail.com> Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: fix uaf for bfqq in bic_set_bfqq()Yu Kuai2023-01-291-1/+1
|/ | | | | | | | | | | | | | | | After commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'"), bic->bfqq will be accessed in bic_set_bfqq(), however, in some context bic->bfqq will be freed, and bic_set_bfqq() is called with the freed bic->bfqq. Fix the problem by always freeing bfqq after bic_set_bfqq(). Fixes: 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'") Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230130014136.591038-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: switch 'bfqg->ref' to use atomic refcount apisYu Kuai2023-01-151-5/+3
| | | | | | | | | | | | | | | | | | The updating of 'bfqg->ref' should be protected by 'bfqd->lock', however, during code review, we found that bfq_pd_free() update 'bfqg->ref' without holding the lock, which is problematic: 1) bfq_pd_free() triggered by removing cgroup is called asynchronously; 2) bfqq will grab bfqg reference, and exit bfqq will drop the reference, which can concurrent with 1). Unfortunately, 'bfqd->lock' can't be held here because 'bfqd' might already be freed in bfq_pd_free(). Fix the problem by using atomic refcount apis. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230103084755.1256479-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: replace 0/1 with false/true in bic apisYu Kuai2022-12-141-4/+4
| | | | | | | | | Just to make the code a litter cleaner, there are no functional changes. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221214033155.3455754-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: don't return bfqg from __bfq_bic_change_cgroup()Yu Kuai2022-12-141-5/+3
| | | | | | | | | The return value is not used, hence remove it. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221214033155.3455754-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linuxLinus Torvalds2022-12-131-1/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - Support some passthrough commands without CAP_SYS_ADMIN (Kanchan Joshi) - Refactor PCIe probing and reset (Christoph Hellwig) - Various fabrics authentication fixes and improvements (Sagi Grimberg) - Avoid fallback to sequential scan due to transient issues (Uday Shankar) - Implement support for the DEAC bit in Write Zeroes (Christoph Hellwig) - Allow overriding the IEEE OUI and firmware revision in configfs for nvmet (Aleksandr Miloserdov) - Force reconnect when number of queue changes in nvmet (Daniel Wagner) - Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi Grimberg, Christoph Hellwig, Christophe JAILLET) - Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni) - Use the common tagset helpers in nvme-pci driver (Christoph Hellwig) - Cleanup the nvme-pci removal path (Christoph Hellwig) - Use kstrtobool() instead of strtobool (Christophe JAILLET) - Allow unprivileged passthrough of Identify Controller (Joel Granados) - Support io stats on the mpath device (Sagi Grimberg) - Minor nvmet cleanup (Sagi Grimberg) - MD pull requests via Song: - Code cleanups (Christoph) - Various fixes - Floppy pull request from Denis: - Fix a memory leak in the init error path (Yuan) - Series fixing some batch wakeup issues with sbitmap (Gabriel) - Removal of the pktcdvd driver that was deprecated more than 5 years ago, and subsequent removal of the devnode callback in struct block_device_operations as no users are now left (Greg) - Fix for partition read on an exclusively opened bdev (Jan) - Series of elevator API cleanups (Jinlong, Christoph) - Series of fixes and cleanups for blk-iocost (Kemeng) - Series of fixes and cleanups for blk-throttle (Kemeng) - Series adding concurrent support for sync queues in BFQ (Yu) - Series bringing drbd a bit closer to the out-of-tree maintained version (Christian, Joel, Lars, Philipp) - Misc drbd fixes (Wang) - blk-wbt fixes and tweaks for enable/disable (Yu) - Fixes for mq-deadline for zoned devices (Damien) - Add support for read-only and offline zones for null_blk (Shin'ichiro) - Series fixing the delayed holder tracking, as used by DM (Yu, Christoph) - Series enabling bio alloc caching for IRQ based IO (Pavel) - Series enabling userspace peer-to-peer DMA (Logan) - BFQ waker fixes (Khazhismel) - Series fixing elevator refcount issues (Christoph, Jinlong) - Series cleaning up references around queue destruction (Christoph) - Series doing quiesce by tagset, enabling cleanups in drivers (Christoph, Chao) - Series untangling the queue kobject and queue references (Christoph) - Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye, Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph) * tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits) blktrace: Fix output non-blktrace event when blk_classic option enabled block: sed-opal: Don't include <linux/kernel.h> sed-opal: allow using IOC_OPAL_SAVE for locking too blk-cgroup: Fix typo in comment block: remove bio_set_op_attrs nvmet: don't open-code NVME_NS_ATTR_RO enumeration nvme-pci: use the tagset alloc/free helpers nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers nvme: consolidate setting the tagset flags nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set block: bio_copy_data_iter nvme-pci: split out a nvme_pci_ctrl_is_dead helper nvme-pci: return early on ctrl state mismatch in nvme_reset_work nvme-pci: rename nvme_disable_io_queues nvme-pci: cleanup nvme_suspend_queue nvme-pci: remove nvme_pci_disable nvme-pci: remove nvme_disable_admin_queue nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl nvme: use nvme_wait_ready in nvme_shutdown_ctrl ...
| * block, bfq: don't declare 'bfqd' as type 'void *' in bfq_groupYu Kuai2022-11-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | Prevent unnecessary format conversion for bfqg->bfqd in multiple places. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Paolo Valente <paolo.valente@unimore.it> Link: https://lore.kernel.org/r/20221102022542.3621219-6-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: record how many queues have pending requestsYu Kuai2022-11-011-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Prepare to refactor the counting of 'num_groups_with_pending_reqs'. Add a counter in bfq_group, update it while tracking if bfqq have pending requests and when bfq_bfqq_move() is called. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220916071942.214222-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: fix null pointer dereference in bfq_bio_bfqg()Yu Kuai2022-11-081-0/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Out test found a following problem in kernel 5.10, and the same problem should exist in mainline: BUG: kernel NULL pointer dereference, address: 0000000000000094 PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 7 PID: 155 Comm: kworker/7:1 Not tainted 5.10.0-01932-g19e0ace2ca1d-dirty 4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-b4 Workqueue: kthrotld blk_throtl_dispatch_work_fn RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bfq_bic_update_cgroup+0x3c/0x350 ? ioc_create_icq+0x42/0x270 bfq_init_rq+0xfd/0x1060 bfq_insert_requests+0x20f/0x1cc0 ? ioc_create_icq+0x122/0x270 blk_mq_sched_insert_requests+0x86/0x1d0 blk_mq_flush_plug_list+0x193/0x2a0 blk_flush_plug_list+0x127/0x170 blk_finish_plug+0x31/0x50 blk_throtl_dispatch_work_fn+0x151/0x190 process_one_work+0x27c/0x5f0 worker_thread+0x28b/0x6b0 ? rescuer_thread+0x590/0x590 kthread+0x153/0x1b0 ? kthread_flush_work+0x170/0x170 ret_from_fork+0x1f/0x30 Modules linked in: CR2: 0000000000000094 ---[ end trace e2e59ac014314547 ]--- RIP: 0010:bfq_bio_bfqg+0x52/0xc0 Code: 94 00 00 00 00 75 2e 48 8b 40 30 48 83 05 35 06 c8 0b 01 48 85 c0 74 3d 4b RSP: 0018:ffffc90001a1fba0 EFLAGS: 00010002 RAX: ffff888100d60400 RBX: ffff8881132e7000 RCX: 0000000000000000 RDX: 0000000000000017 RSI: ffff888103580a18 RDI: ffff888103580a18 RBP: ffff8881132e7000 R08: 0000000000000000 R09: ffffc90001a1fe10 R10: 0000000000000a20 R11: 0000000000034320 R12: 0000000000000000 R13: ffff888103580a18 R14: ffff888114447000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000094 CR3: 0000000100cdb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Root cause is quite complex: 1) use bfq elevator for the test device. 2) create a cgroup CG 3) config blk throtl in CG blkg_conf_prep blkg_create 4) create a thread T1 and issue async io in CG: bio_init bio_associate_blkg ... submit_bio submit_bio_noacct blk_throtl_bio -> io is throttled // io submit is done 5) switch elevator: bfq_exit_queue blkcg_deactivate_policy list_for_each_entry(blkg, &q->blkg_list, q_node) blkg->pd[] = NULL // bfq policy is removed 5) thread t1 exist, then remove the cgroup CG: blkcg_unpin_online blkcg_destroy_blkgs blkg_destroy list_del_init(&blkg->q_node) // blkg is removed from queue list 6) switch elevator back to bfq bfq_init_queue bfq_create_group_hierarchy blkcg_activate_policy list_for_each_entry_reverse(blkg, &q->blkg_list) // blkg is removed from list, hence bfq policy is still NULL 7) throttled io is dispatched to bfq: bfq_insert_requests bfq_init_rq bfq_bic_update_cgroup bfq_bio_bfqg bfqg = blkg_to_bfqg(blkg) // bfqg is NULL because bfq policy is NULL The problem is only possible in bfq because only bfq can be deactivated and activated while queue is online, while others can only be deactivated while the device is removed. Fix the problem in bfq by checking if blkg is online before calling blkg_to_bfqg(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221108103434.2853269-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: remove unused functionsYu Kuai2022-08-221-5/+0
| | | | | | | | | | While doing code coverage testing(CONFIG_BFQ_CGROUP_DEBUG is disabled), we found that some functions doesn't have caller, thus remove them. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220816015631.1323948-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block/bfq: Use the new blk_opf_t typeBart Van Assche2022-07-141-13/+13
| | | | | | | | | | | | | Use the new blk_opf_t type for arguments and variables that represent request flags or a bitwise combination of a request operation and request flags. Rename those variables from 'op' into 'opf'. This patch does not change any functionality. Cc: Jan Kara <jack@suse.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-8-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: bfq: Fix kernel-doc headersBart Van Assche2022-06-271-2/+4
| | | | | | | | | | | | | | Fix the following warnings: block/bfq-cgroup.c:721: warning: Function parameter or member 'bfqg' not described in '__bfq_bic_change_cgroup' block/bfq-cgroup.c:721: warning: Excess function parameter 'blkcg' description in '__bfq_bic_change_cgroup' block/bfq-cgroup.c:870: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_leaf_entity' block/bfq-cgroup.c:900: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_active_queues' Cc: Jan Kara <jack@suse.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20220617210859.106623-1-bvanassche@acm.org
* block: bfq: Remove an unused function definitionBart Van Assche2022-06-271-2/+0
| | | | | | | | | This patch is the result of the analysis of a sparse report. Cc: Jan Kara <jack@suse.cz> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20220617204433.102022-1-bvanassche@acm.org
* bfq: Make sure bfqg for which we are queueing requests is onlineJan Kara2022-04-171-3/+12
| | | | | | | | | | | | | | | | | | Bios queued into BFQ IO scheduler can be associated with a cgroup that was already offlined. This may then cause insertion of this bfq_group into a service tree. But this bfq_group will get freed as soon as last bio associated with it is completed leading to use after free issues for service tree users. Fix the problem by making sure we always operate on online bfq_group. If the bfq_group associated with the bio is not online, we pick the first online parent. CC: stable@vger.kernel.org Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-9-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq: Get rid of __bio_blkcg() usageJan Kara2022-04-171-40/+23
| | | | | | | | | | | | | | | | | | | BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio would not be associated with any blkcg, the usage of __bio_blkcg() in BFQ is prone to races with the task being migrated between cgroups as __bio_blkcg() calls at different places could return different blkcgs. Convert BFQ to the new situation where bio->bi_blkg is initialized in bio_set_dev() and thus practically always valid. This allows us to save blkcg_gq lookup and noticeably simplify the code. CC: stable@vger.kernel.org Fixes: 0fe061b9f03c ("blkcg: fix ref count issue with bio_blkcg() using task_css") Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-8-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq: Track whether bfq_group is still onlineJan Kara2022-04-171-1/+2
| | | | | | | | | | | | | | | | Track whether bfq_group is still online. We cannot rely on blkcg_gq->online because that gets cleared only after all policies are offlined and we need something that gets updated already under bfqd->lock when we are cleaning up our bfq_group to be able to guarantee that when we see online bfq_group, it will stay online while we are holding bfqd->lock lock. CC: stable@vger.kernel.org Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-7-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq: Split shared queues on move between cgroupsJan Kara2022-04-171-3/+33
| | | | | | | | | | | | | | | | | | | | When bfqq is shared by multiple processes it can happen that one of the processes gets moved to a different cgroup (or just starts submitting IO for different cgroup). In case that happens we need to split the merged bfqq as otherwise we will have IO for multiple cgroups in one bfqq and we will just account IO time to wrong entities etc. Similarly if the bfqq is scheduled to merge with another bfqq but the merge didn't happen yet, cancel the merge as it need not be valid anymore. CC: stable@vger.kernel.org Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by: "yukuai (C)" <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220401102752.8599-3-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: don't move oom_bfqqYu Kuai2022-02-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [ 2073.020411] page dumped because: kasan: bad access detected [ 2073.020412] [ 2073.020414] Memory state around the buggy address: [ 2073.020420] ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020424] ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020430] ^ [ 2073.020434] ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020438] ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020439] ================================================================== The same problem exist in mainline as well. This is because oom_bfqq is moved to a non-root group, thus root_group is freed earlier. Thus fix the problem by don't move oom_bfqq. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220129015924.3958918-4-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: avoid moving bfqq to it's parent bfqgYu Kuai2022-02-181-1/+9
| | | | | | | | Moving bfqq to it's parent bfqg is pointless. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20220129015924.3958918-3-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: fix UAF problem in bfqg_stats_init()Zheng Liang2021-10-191-5/+7
| | | | | | | | | | | | | | | | | | In bfq_pd_alloc(), the function bfqg_stats_init() init bfqg. If blkg_rwstat_init() init bfqg_stats->bytes successful and init bfqg_stats->ios failed, bfqg_stats_init() return failed, bfqg will be freed. But blkg_rwstat->cpu_cnt is not deleted from the list of percpu_counters. If we traverse the list of percpu_counters, It will have UAF problem. we should use blkg_rwstat_exit() to cleanup bfqg_stats bytes in the above scenario. Fixes: commit fd41e60331b ("bfq-iosched: stop using blkg->stat_bytes and ->stat_ios") Signed-off-by: Zheng Liang <zhengliang6@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20211018024225.1493938-1-zhengliang6@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: move elevator.h to block/Christoph Hellwig2021-10-181-1/+1
| | | | | | | | | | | | Except for the features passed to blk_queue_required_elevator_features, elevator.h is only needed internally to the block layer. Move the ELEVATOR_F_* definitions to blkdev.h, and the move elevator.h to block/, dropping all the spurious includes outside of that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: reset last_bfqq_created on group changePaolo Valente2021-10-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ maintains a per-group pointer to the last bfq_queue created. If such a queue, say bfqq, happens to move to a different group, then bfqq is no more a valid last bfq_queue created for its previous group. That pointer must then be cleared. Not resetting such a pointer may also cause UAF, if bfqq happens to also be freed after being moved to a different group. This commit performs this missing reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"). Such a missing reset is most likely the cause of the crash reported in [1]. With some analysis, we found that this crash was due to the above UAF. And such UAF did go away with this commit applied [1]. Anyway, before this commit, that crash happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains no error related with the above UAF, and can then be restored. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Tested-by: Grzegorz Kowal <custos.mentis@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: merge bursts of newly-created queuesPaolo Valente2021-03-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many throughput-sensitive workloads are made of several parallel I/O flows, with all flows generated by the same application, or more generically by the same task (e.g., system boot). The most counterproductive action with these workloads is plugging I/O dispatch when one of the bfq_queues associated with these flows remains temporarily empty. To avoid this plugging, BFQ has been using a burst-handling mechanism for years now. This mechanism has proven effective for throughput, and not detrimental for service guarantees. This commit pushes this mechanism a little bit further, basing on the following two facts. First, all the I/O flows of a the same application or task contribute to the execution/completion of that common application or task. So the performance figures that matter are total throughput of the flows and task-wide I/O latency. In particular, these flows do not need to be protected from each other, in terms of individual bandwidth or latency. Second, the above fact holds regardless of the number of flows. Putting these two facts together, this commits merges stably the bfq_queues associated with these I/O flows, i.e., with the processes that generate these IO/ flows, regardless of how many the involved processes are. To decide whether a set of bfq_queues is actually associated with the I/O flows of a common application or task, and to merge these queues stably, this commit operates as follows: given a bfq_queue, say Q2, currently being created, and the last bfq_queue, say Q1, created before Q2, Q2 is merged stably with Q1 if - very little time has elapsed since when Q1 was created - Q2 has the same ioprio as Q1 - Q2 belongs to the same group as Q1 Merging bfq_queues also reduces scheduling overhead. A fio test with ten random readers on /dev/nullb shows a throughput boost of 40%, with a quadcore. Since BFQ's execution time amounts to ~50% of the total per-request processing time, the above throughput boost implies that BFQ's overhead is reduced by more than 50%. Tested-by: Jan Kara <jack@suse.cz> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Link: https://lore.kernel.org/r/20210304174627.161-7-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq: fix blkio cgroup leakage v4Dmitry Monakhov2020-08-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes from v1: - update commit description with proper ref-accounting justification commit db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") introduce leak forbfq_group and blkcg_gq objects because of get/put imbalance. In fact whole idea of original commit is wrong because bfq_group entity can not dissapear under us because it is referenced by child bfq_queue's entities from here: -> bfq_init_entity() ->bfqg_and_blkg_get(bfqg); ->entity->parent = bfqg->my_entity -> bfq_put_queue(bfqq) FINAL_PUT ->bfqg_and_blkg_put(bfqq_group(bfqq)) ->kmem_cache_free(bfq_pool, bfqq); So parent entity can not disappear while child entity is in tree, and child entities already has proper protection. This patch revert commit db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") bfq_group leak trace caused by bad commit: -> blkg_alloc -> bfq_pq_alloc -> bfqg_get (+1) ->bfq_activate_bfqq ->bfq_activate_requeue_entity -> __bfq_activate_entity ->bfq_get_entity ->bfqg_and_blkg_get (+1) <==== : Note1 ->bfq_del_bfqq_busy ->bfq_deactivate_entity+0x53/0xc0 [bfq] ->__bfq_deactivate_entity+0x1b8/0x210 [bfq] -> bfq_forget_entity(is_in_service = true) entity->on_st_or_in_serv = false <=== :Note2 if (is_in_service) return; ==> do not touch reference -> blkcg_css_offline -> blkcg_destroy_blkgs -> blkg_destroy -> bfq_pd_offline -> __bfq_deactivate_entity if (!entity->on_st_or_in_serv) /* true, because (Note2) return false; -> bfq_pd_free -> bfqg_put() (-1, byt bfqg->ref == 2) because of (Note2) So bfq_group and blkcg_gq will leak forever, see test-case below. ##TESTCASE_BEGIN: #!/bin/bash max_iters=${1:-100} #prep cgroup mounts mount -t tmpfs cgroup_root /sys/fs/cgroup mkdir /sys/fs/cgroup/blkio mount -t cgroup -o blkio none /sys/fs/cgroup/blkio # Prepare blkdev grep blkio /proc/cgroups truncate -s 1M img losetup /dev/loop0 img echo bfq > /sys/block/loop0/queue/scheduler grep blkio /proc/cgroups for ((i=0;i<max_iters;i++)) do mkdir -p /sys/fs/cgroup/blkio/a echo 0 > /sys/fs/cgroup/blkio/a/cgroup.procs dd if=/dev/loop0 bs=4k count=1 of=/dev/null iflag=direct 2> /dev/null echo 0 > /sys/fs/cgroup/blkio/cgroup.procs rmdir /sys/fs/cgroup/blkio/a grep blkio /proc/cgroups done ##TESTCASE_END: Fixes: db37a34c563b ("block, bfq: get a ref to a group when adding it to a service tree") Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: invoke flush_idle_tree after reparent_active_queues in pd_offlinePaolo Valente2020-03-211-7/+13
| | | | | | | | | | | | | | | | | In bfq_pd_offline(), the function bfq_flush_idle_tree() is invoked to flush the rb tree that contains all idle entities belonging to the pd (cgroup) being destroyed. In particular, bfq_flush_idle_tree() is invoked before bfq_reparent_active_queues(). Yet the latter may happen to add some entities to the idle tree. It happens if, in some of the calls to bfq_bfqq_move() performed by bfq_reparent_active_queues(), the queue to move is empty and gets expired. This commit simply reverses the invocation order between bfq_flush_idle_tree() and bfq_reparent_active_queues(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: make reparent_leaf_entity actually work only on leaf entitiesPaolo Valente2020-03-211-17/+31
| | | | | | | | | | | | | | | | | | | | bfq_reparent_leaf_entity() reparents the input leaf entity (a leaf entity represents just a bfq_queue in an entity tree). Yet, the input entity is guaranteed to always be a leaf entity only in two-level entity trees. In this respect, because of the error fixed by commit 14afc5936197 ("block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()"), all (wrongly collapsed) entity trees happened to actually have only two levels. After the latter commit, this does not hold any longer. This commit fixes this problem by modifying bfq_reparent_leaf_entity(), so that it searches an active leaf entity down the path that stems from the input entity. Such a leaf entity is guaranteed to exist when bfq_reparent_leaf_entity() is invoked. Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroupPaolo Valente2020-03-211-4/+1
| | | | | | | | | | | | | A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The goal of this put is to release a process reference to a bfq_queue. But process-reference releases may trigger also some extra operation, and, to this goal, are handled through bfq_release_process_ref(). So, turn the invocation of bfq_put_queue() into an invocation of bfq_release_process_ref(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: move forward the getting of an extra ref in bfq_bfqq_movePaolo Valente2020-03-211-7/+7
| | | | | | | | | | | | | | | | | | | | Commit ecedd3d7e199 ("block, bfq: get extra ref to prevent a queue from being freed during a group move") gets an extra reference to a bfq_queue before possibly deactivating it (temporarily), in bfq_bfqq_move(). This prevents the bfq_queue from disappearing before being reactivated in its new group. Yet, the bfq_queue may also be expired (i.e., its service may be stopped) before the bfq_queue is deactivated. And also an expiration may lead to a premature freeing. This commit fixes this issue by simply moving forward the getting of the extra reference already introduced by commit ecedd3d7e199 ("block, bfq: get extra ref to prevent a queue from being freed during a group move"). Reported-by: cki-project@redhat.com Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()Carlo Nonato2020-03-061-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | The bfq_find_set_group() function takes as input a blkcg (which represents a cgroup) and retrieves the corresponding bfq_group, then it updates the bfq internal group hierarchy (see comments inside the function for why this is needed) and finally it returns the bfq_group. In the hierarchy update cycle, the pointer holding the correct bfq_group that has to be returned is mistakenly used to traverse the hierarchy bottom to top, meaning that in each iteration it gets overwritten with the parent of the current group. Since the update cycle stops at root's children (depth = 2), the overwrite becomes a problem only if the blkcg describes a cgroup at a hierarchy level deeper than that (depth > 2). In this case the root's child that happens to be also an ancestor of the correct bfq_group is returned. The main consequence is that processes contained in a cgroup at depth greater than 2 are wrongly placed in the group described above by BFQ. This commits fixes this problem by using a different bfq_group pointer in the update cycle in order to avoid the overwrite of the variable holding the original group reference. Reported-by: Kwon Je Oh <kwonje.oh2@gmail.com> Signed-off-by: Carlo Nonato <carlo.nonato95@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: get a ref to a group when adding it to a service treePaolo Valente2020-02-031-1/+1
| | | | | | | | | | | | | | | BFQ schedules generic entities, which may represent either bfq_queues or groups of bfq_queues. When an entity is inserted into a service tree, a reference must be taken, to make sure that the entity does not disappear while still referred in the tree. Unfortunately, such a reference is mistakenly taken only if the entity represents a bfq_queue. This commit takes a reference also in case the entity represents a group. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Chris Evich <cevich@redhat.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: remove ifdefs from around gets/puts of bfq groupsPaolo Valente2020-02-031-0/+4
| | | | | | | | | ifdefs around gets and puts of bfq groups reduce readability, remove them. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: extend incomplete name of field on_stPaolo Valente2020-02-031-1/+1
| | | | | | | | | | | The flag on_st in the bfq_entity data structure is true if the entity is on a service tree or is in service. Yet the name of the field, confusingly, does not mention the second, very important case. Extend the name to mention the second case too. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: get extra ref to prevent a queue from being freed during a group ↵Paolo Valente2020-02-031-0/+8
| | | | | | | | | | | | | | | | | | | move In bfq_bfqq_move(), the bfq_queue, say Q, to be moved to a new group may happen to be deactivated in the scheduling data structures of the source group (and then activated in the destination group). If Q is referred only by the data structures in the source group when the deactivation happens, then Q is freed upon the deactivation. This commit addresses this issue by getting an extra reference before the possible deactivation, and releasing this extra reference after Q has been moved. Tested-by: Chris Evich <cevich@redhat.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq-iosched: Ensure bio->bi_blkg is valid before using itHou Tao2019-12-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bio->bi_blkg will be NULL when the issue of the request has bypassed the block layer as shown in the following oops: Internal error: Oops: 96000005 [#1] SMP CPU: 17 PID: 2996 Comm: scsi_id Not tainted 5.4.0 #4 Call trace: percpu_counter_add_batch+0x38/0x4c8 bfqg_stats_update_legacy_io+0x9c/0x280 bfq_insert_requests+0xbac/0x2190 blk_mq_sched_insert_request+0x288/0x670 blk_execute_rq_nowait+0x140/0x178 blk_execute_rq+0x8c/0x140 sg_io+0x604/0x9c0 scsi_cmd_ioctl+0xe38/0x10a8 scsi_cmd_blk_ioctl+0xac/0xe8 sd_ioctl+0xe4/0x238 blkdev_ioctl+0x590/0x20e0 block_ioctl+0x60/0x98 do_vfs_ioctl+0xe0/0x1b58 ksys_ioctl+0x80/0xd8 __arm64_sys_ioctl+0x40/0x78 el0_svc_handler+0xc4/0x270 so ensure its validity before using it. Fixes: fd41e60331b1 ("bfq-iosched: stop using blkg->stat_bytes and ->stat_ios") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq-iosched: stop using blkg->stat_bytes and ->stat_iosTejun Heo2019-11-071-12/+27
| | | | | | | | | | | | | | | | | | When used on cgroup1, bfq uses the blkg->stat_bytes and ->stat_ios from blk-cgroup core to populate six stat knobs. blk-cgroup core is moving away from blkg_rwstat to improve scalability and won't be able to support this usage. It isn't like the sharing gains all that much. Let's break it out to dedicated rwstat counters which are updated when on cgroup1. This makes use of bfqg_*rwstat*() helpers outside of CONFIG_BFQ_CGROUP_DEBUG. Move them out. v2: Compile fix when !CONFIG_BFQ_CGROUP_DEBUG. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq-iosched: relocate bfqg_*rwstat*() helpersTejun Heo2019-11-071-23/+23
| | | | | | | | | | | Collect them right under #ifdef CONFIG_BFQ_CGROUP_DEBUG. The next patch will use them from !DEBUG path and this makes it easy to move them out of the ifdef block. This is pure code reorganization. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq: Add per-device weightFam Zheng2019-09-061-11/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds to BFQ the missing per-device weight interfaces: blkio.bfq.weight_device on legacy and io.bfq.weight on unified. The implementation pretty closely resembles what we had in CFQ and the parsing code is basically reused. Tests ===== Using two cgroups and three block devices, having weights setup as: Cgroup test1 test2 ============================================ default 100 500 sda 500 100 sdb default default sdc 200 200 cgroup v1 runs -------------- sda.test1.out: READ: bw=913MiB/s sda.test2.out: READ: bw=183MiB/s sdb.test1.out: READ: bw=213MiB/s sdb.test2.out: READ: bw=1054MiB/s sdc.test1.out: READ: bw=650MiB/s sdc.test2.out: READ: bw=650MiB/s cgroup v2 runs -------------- sda.test1.out: READ: bw=915MiB/s sda.test2.out: READ: bw=184MiB/s sdb.test1.out: READ: bw=216MiB/s sdb.test2.out: READ: bw=1069MiB/s sdc.test1.out: READ: bw=621MiB/s sdc.test2.out: READ: bw=622MiB/s Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* bfq: Extract bfq_group_set_weight from bfq_io_set_weight_legacyFam Zheng2019-09-061-28/+32
| | | | | | | | | This function will be useful when we update weight from the soon-coming per-device interface. Signed-off-by: Fam Zheng <zhengfeiran@bytedance.com> Reviewed-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 23:41:41 +0000