summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/pci_irq.c
Commit message (Collapse)AuthorAgeFilesLines
* ACPI / PCI: fix LPIC IRQ model default PCI IRQ polarityJianmin Lv2022-11-261-2/+4
| | | | | | | | | | | | | | | | | | | | | On LoongArch based systems, the PCI devices (e.g. SATA controllers and PCI-to-PCI bridge controllers) in Loongson chipsets output high-level interrupt signal to the interrupt controller they are connected (see Loongson 7A1000 Bridge User Manual v2.00, sec 5.3, "For the bridge chip, AC97 DMA interrupts are edge triggered, gpio interrupts can be configured to be level triggered or edge triggered as needed, and the rest of the interrupts are level triggered and active high."), while the IRQs are active low from the perspective of PCI (see Conventional PCI spec r3.0, sec 2.2.6, "Interrupts on PCI are optional and defined as level sensitive, asserted low."), which means that the interrupt output of PCI devices plugged into PCI-to-PCI bridges of Loongson chipset will be also converted to high-level. So high level triggered type is required to be passed to acpi_register_gsi() when creating mappings for PCI devices. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221022075955.11726-2-lvjianmin@loongson.cn
* ACPI: PCI: IRQ: Consolidate printing diagnostic messagesRafael J. Wysocki2021-03-081-24/+10
| | | | | | | | | | | | | | | | | | | | | | | The code in pci_irq.c prints diagnostic messages using different and inconsistent methods. The majority of them are printed with the help of the dev_*() familiy of logging functions, but ACPI_DEBUG_PRINT() and ACPI_DEBUG_PRINT_RAW() are still used in some places which requires the ACPICA debug to be enabled additionally which is a nuisance and one message is printed using the raw printk(). To consolidate the printing of messages in that code, convert all of the ACPI_DEBUG_PRINT() instances in it into dev_dbg(), which is consistent with the way the other messages are printed by it, replace the only ACPI_DEBUG_PRINT_RAW() instance with pr_debug() and make it use pr_warn() istead of printk(KERN_WARNING ). Also add a pr_fmt() definition to that file and drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not used any more after the above changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
* ACPI: Fix whitespace inconsistenciesMaximilian Luz2020-11-091-1/+1
| | | | | | | | Replaces spaces with tabs where spaces have been (inconsistently) used for indentation and removes trailing whitespaces. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / PCI: fix acpi_pci_irq_enable() memory leakWenwen Wang2019-09-031-1/+3
| | | | | | | | | | | In acpi_pci_irq_enable(), 'entry' is allocated by kzalloc() in acpi_pci_irq_check_entry() (invoked from acpi_pci_irq_lookup()). However, it is not deallocated if acpi_pci_irq_valid() returns false, leading to a memory leak. To fix this issue, free 'entry' before returning 0. Fixes: e237a5518425 ("x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner2019-05-301-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI / PCI: fix GIC irq model default PCI IRQ polarityLorenzo Pieralisi2016-09-101-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ACPI ARM based systems the GIC interrupt controller and corresponding interrupt model permit only the high polarity for level interrupts. ACPI firmware describes PCI legacy IRQs through entries in the _PRT objects. Entries in the _PRT can be of two types: - Static: not configurable, trigger/polarity default to level-low, _PRT entry defines the global GSI interrupt number - Configurable: _PRT interrupt entry contains a reference to the corresponding PCI interrupt link device (that in turn provides the interrupt descriptor through its _CRS/_PRS methods) Configurable IRQ entries are not currently allowed by the ACPI specification on ARM since they can only be used for interrupt pins that are routable, as per ACPI specifications (version 6.1, 6.2.13): "[...] There are two ways that _PRT can be used. Typically, the interrupt input that a given PCI interrupt is on is configurable. For example, a given PCI interrupt might be configured for either IRQ 10 or 11 on an 8259 interrupt controller. In this model, each interrupt is represented in the ACPI namespace as a PCI Interrupt Link Device. [...]" ARM platforms GIC configurations do not allow dynamic IRQ routing, since routing is statically laid out at synthesis time; therefore PCI interrupt links cannot be used for PCI legacy IRQ descriptions in the _PRT on ARM systems. On the other hand, current core ACPI code handling PCI legacy IRQs consider IRQ trigger/polarity for static _PRT entries as level-low. On ARM systems with a GIC interrupt controller and corresponding ACPI interrupt model this does not work in that GIC interrupt controller is only capable of handling level interrupts whose polarity is high (for PCI legacy IRQs - that are level-low by specification - this means that the legacy IRQs are inverted before reaching the interrupt controller pin), resulting in IRQ allocation failures such as: genirq: Setting trigger mode 8 for irq 18 failed (gic_set_type+0x0/0x48) Change the default polarity for PCI legacy IRQs to high on systems booting wth ACPI on platforms with a GIC interrupt controller model, fixing the discrepancy between specification and HW behaviour. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Duc Dang <dhdang@apm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"Chen Fan2016-03-091-4/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in the Interrupt Line register means "unknown" or "no connection." Previously, when we couldn't derive an IRQ from the _PRT, we fell back to using the value from Interrupt Line as an IRQ. It's questionable whether we should do that at all, but the spec clearly suggests we shouldn't do it for the value 255 on x86. Calling request_irq() with IRQ 255 may succeed, but the driver won't receive any interrupts. Or, if IRQ 255 is shared with another device, it may succeed, and the driver's ISR will be called at random times when the *other* device interrupts. Or it may fail if another device is using IRQ 255 with incompatible flags. What we *want* is for request_irq() to fail predictably so the driver can fall back to polling. On x86, assume 255 in the Interrupt Line means the INTx line is not connected. In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq() will fail gracefully with -ENOTCONN. We found this problem on a system where Secure Boot firmware assigned Interrupt Line 255 to an i801_smbus device and another device was already using MSI-X IRQ 255. This was in v3.10, where i801_probe() fails if request_irq() fails: i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143) i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C i801_smbus 0000:00:1f.3: PCI INT C: no GSI genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa) CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1 Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5 Call Trace: dump_stack+0x19/0x1b __setup_irq+0x54a/0x570 request_threaded_irq+0xcc/0x170 i801_probe+0x32f/0x508 [i2c_i801] local_pci_probe+0x45/0xa0 i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16 i801_smbus: probe of 0000:00:1f.3 failed with error -16 After aeb8a3d16ae0 ("i2c: i801: Check if interrupts are disabled"), i801_probe() will fall back to polling if request_irq() fails. But we still need this patch because request_irq() may succeed or fail depending on other devices in the system. If request_irq() fails, i801_smbus will work by falling back to polling, but if it succeeds, i801_smbus won't work because it expects interrupts that it may not receive. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"Bjorn Helgaas2016-02-271-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug. Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not v4.3 and bisected it to 991de2e59090. Sunjin reported that the RocketRAID 272x driver worked in v4.2 but not v4.3. In both cases booting with "pci=routirq" is a workaround. I think the problem is that after 991de2e59090, we no longer call pcibios_enable_irq() for upstream bridges. Prior to 991de2e59090, when a driver called pci_enable_device(), we recursively called pcibios_enable_irq() for upstream bridges via pci_enable_bridge(). After 991de2e59090, we call pcibios_enable_irq() from pci_device_probe() instead of the pci_enable_device() path, which does *not* call pcibios_enable_irq() for upstream bridges. Revert 991de2e59090 to fix these driver regressions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru> Reported-by: Sunjin Yang <fan4326@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com>
* Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"Bjorn Helgaas2016-02-171-4/+6
| | | | | | | | | | | | | | Revert 811a4e6fce09 ("PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"). This is part of reverting 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com>
* ACPI, PCI, irq: remove redundant check for null string pointerColin Ian King2016-01-051-3/+0
| | | | | | | | | | | | source is decleared as a 4 byte char array in struct acpi_pci_routing_table so !prt->source is a redundant null string pointer check. Detected with smatch: drivers/acpi/pci_irq.c:134 do_prt_fixups() warn: this array is probably non-NULL. 'prt->source' Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQJiang Liu2015-09-261-0/+1
| | | | | | | | | | | | | | | | | Avoid IRQs occupied by ISA IRQs when allocating IRQs for PCI link devices, otherwise it may cause interrupt storm due to incompatible pin attributes. This issue was triggered on a KVM virtual machine, which 1) uses IRQ9 for SCI in high level mode. 2) defines an PCI interrupt link device (LNKS) with IRQ9 as the only possible irq. 3) has an PCI device referring to link device LNKS. So it causes interrupt storm when enabling the PCI device because PCI IRQ works in low level mode. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge tag 'pm+acpi-4.3-rc1' of ↵Linus Torvalds2015-09-011-4/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "From the number of commits perspective, the biggest items are ACPICA and cpufreq changes with the latter taking the lead (over 50 commits). On the cpufreq front, there are many cleanups and minor fixes in the core and governors, driver updates etc. We also have a new cpufreq driver for Mediatek MT8173 chips. ACPICA mostly updates its debug infrastructure and adds a number of fixes and cleanups for a good measure. The Operating Performance Points (OPP) framework is updated with new DT bindings and support for them among other things. We have a few updates of the generic power domains framework and a reorganization of the ACPI device enumeration code and bus type operations. And a lot of fixes and cleanups all over. Included is one branch from the MFD tree as it contains some PM-related driver core and ACPI PM changes a few other commits are based on. Specifics: - ACPICA update to upstream revision 20150818 including method tracing extensions to allow more in-depth AML debugging in the kernel and a number of assorted fixes and cleanups (Bob Moore, Lv Zheng, Markus Elfring). - ACPI sysfs code updates and a documentation update related to AML method tracing (Lv Zheng). - ACPI EC driver fix related to serialized evaluations of _Qxx methods and ACPI tools updates allowing the EC userspace tool to be built from the kernel source (Lv Zheng). - ACPI processor driver updates preparing it for future introduction of CPPC support and ACPI PCC mailbox driver updates (Ashwin Chaugule). - ACPI interrupts enumeration fix for a regression related to the handling of IRQ attribute conflicts between MADT and the ACPI namespace (Jiang Liu). - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar). - ACPI device registration code reorganization to separate the sysfs-related code and bus type operations from the rest (Rafael J Wysocki). - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause, Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss). - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan Xinhui, Rafael J Wysocki). - cpufreq core cleanups on top of the previous changes allowing it to preseve its sysfs directories over system suspend/resume (Viresh Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior). - cpufreq fixes and cleanups related to governors (Viresh Kumar). - cpufreq updates (core and the cpufreq-dt driver) related to the turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz). - New DT bindings for Operating Performance Points (OPP), support for them in the OPP framework and in the cpufreq-dt driver plus related OPP framework fixes and cleanups (Viresh Kumar). - cpufreq powernv driver updates (Shilpasri G Bhat). - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen). - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean). - intel_pstate driver updates including Skylake-S support, support for enabling HW P-states per CPU and an additional vendor bypass list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao). - cpuidle core fixes related to the handling of coupled idle states (Xunlei Pang). - intel_idle driver updates including Skylake Client support and support for freeze-mode-specific idle states (Len Brown). - Driver core updates related to power management (Andy Shevchenko, Rafael J Wysocki). - Generic power domains framework fixes and cleanups (Jon Hunter, Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson). - Device PM QoS framework update to allow the latency tolerance setting to be exposed to user space via sysfs (Mika Westerberg). - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas). - System sleep support updates (Alan Stern, Len Brown, SungEun Kim). - rockchip-io AVS support updates (Heiko Stuebner). - PM core clocks support fixup (Colin Ian King). - Power capping RAPL driver update including support for Skylake H/S and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi). - Generic device properties framework fixes related to the handling of static (driver-provided) property sets (Andy Shevchenko). - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat, Shreyas B Prabhu)" * tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings PM / Domains: Fix typo in description of genpd_dev_pm_detach() PM / Domains: Remove unusable governor dummies PM / Domains: Make pm_genpd_init() available to modules PM / domains: Align column headers and data in pm_genpd_summary output powercap / RAPL: disable the 2nd power limit properly tools: cpupower: Fix error when running cpupower monitor PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) PM / OPP: Fix static checker warning (broken 64bit big endian systems) ...
| * ACPI: Remove FSF mailing addressesJarkko Nikula2015-07-081-4/+0
| | | | | | | | | | | | | | | | There is no need to carry potentially outdated Free Software Foundation mailing address in file headers since the COPYING file includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managedJiang Liu2015-07-301-6/+4
| | | | | | | | | | | | | | | | | | Add pci_has_managed_irq(), pci_set_managed_irq(), and pci_reset_managed_irq() to simplify code. No functional change. [bhelgaas: changelog] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
* | PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()Jiang Liu2015-07-301-8/+1
|/ | | | | | | | | | | | | | To support IOAPIC hotplug, we need to allocate PCI IRQ resources on demand and free them when not used anymore. Implement pcibios_alloc_irq() and pcibios_free_irq() to dynamically allocate and free PCI IRQs. Remove mp_should_keep_irq(), which is no longer used. [bhelgaas: changelog] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
* Merge tag 'pm+acpi-4.2-rc1' of ↵Linus Torvalds2015-06-231-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "The rework of backlight interface selection API from Hans de Goede stands out from the number of commits and the number of affected places perspective. The cpufreq core fixes from Viresh Kumar are quite significant too as far as the number of commits goes and because they should reduce CPU online/offline overhead quite a bit in the majority of cases. From the new featues point of view, the ACPICA update (to upstream revision 20150515) adding support for new ACPI 6 material to ACPICA is the one that matters the most as some new significant features will be based on it going forward. Also included is an update of the ACPI device power management core to follow ACPI 6 (which in turn reflects the Windows' device PM implementation), a PM core extension to support wakeup interrupts in a more generic way and support for the ACPI _CCA device configuration object. The rest is mostly fixes and cleanups all over and some documentation updates, including new DT bindings for Operating Performance Points. There is one fix for a regression introduced in the 4.1 cycle, but it adds quite a number of lines of code, it wasn't really ready before Thursday and you were on vacation, so I refrained from pushing it on the last minute for 4.1. Specifics: - ACPICA update to upstream revision 20150515 including basic support for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM, FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore, Lv Zheng). - ACPI device power management core code update to follow ACPI 6 which reflects the ACPI device power management implementation in Windows (Rafael J Wysocki). - rework of the backlight interface selection logic to reduce the number of kernel command line options and improve the handling of DMI quirks that may be involved in that and to make the code generally more straightforward (Hans de Goede). - fixes for the ACPI Embedded Controller (EC) driver related to the handling of EC transactions (Lv Zheng). - fix for a regression related to the ACPI resources management and resulting from a recent change of ACPI initialization code ordering (Rafael J Wysocki). - fix for a system initialization regression related to ACPI introduced during the 3.14 cycle and caused by running the code that switches the platform over to the ACPI mode too early in the initialization sequence (Rafael J Wysocki). - support for the ACPI _CCA device configuration object related to DMA cache coherence (Suravee Suthikulpanit). - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov). - ACPI battery driver cleanups (Luis Henriques, Mathias Krause). - ACPI processor driver cleanups (Hanjun Guo). - cleanups and documentation update related to the ACPI device properties interface based on _DSD (Rafael J Wysocki). - ACPI device power management fixes (Rafael J Wysocki). - assorted cleanups related to ACPI (Dominik Brodowski, Fabian Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki). - fix for a long-standing issue causing General Protection Faults to be generated occasionally on return to user space after resume from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar). - fix to make the suspend core code return -EBUSY consistently in all cases when system suspend is aborted due to wakeup detection (Ruchi Kandoi). - support for automated device wakeup IRQ handling allowing drivers to make their PM support more starightforward (Tony Lindgren). - new tracepoints for suspend-to-idle tracing and rework of the prepare/complete callbacks tracing in the PM core (Todd E Brandt, Rafael J Wysocki). - wakeup sources framework enhancements (Jin Qian). - new macro for noirq system PM callbacks (Grygorii Strashko). - assorted cleanups related to system suspend (Rafael J Wysocki). - cpuidle core cleanups to make the code more efficient (Rafael J Wysocki). - powernv/pseries cpuidle driver update (Shilpasri G Bhat). - cpufreq core fixes related to CPU online/offline that should reduce the overhead of these operations quite a bit, unless the CPU in question is physically going away (Viresh Kumar, Saravana Kannan). - serialization of cpufreq governor callbacks to avoid race conditions in some cases (Viresh Kumar). - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit Bhargava, Joe Konno). - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep Holla, Felipe Balbi, Tang Yuantian). - assorted cleanups in cpufreq drivers and core (Shailendra Verma, Fabian Frederick, Wang Long). - new Device Tree bindings for representing Operating Performance Points (Viresh Kumar). - updates for the common clock operations support code in the PM core (Rajendra Nayak, Geert Uytterhoeven). - PM domains core code update (Geert Uytterhoeven). - Intel Knights Landing support for the RAPL (Running Average Power Limit) power capping driver (Dasaratharaman Chandramouli). - fixes related to the floor frequency setting on Atom SoCs in the RAPL power capping driver (Ajay Thomas). - runtime PM framework documentation update (Ben Dooks). - cpupower tool fix (Herton R Krzesinski)" * tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits) cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state x86: Load __USER_DS into DS/ES after resume PM / OPP: Add binding for 'opp-suspend' PM / OPP: Allow multiple OPP tables to be passed via DT PM / OPP: Add new bindings to address shortcomings of existing bindings ACPI: Constify ACPI device IDs in documentation ACPI / enumeration: Document the rules regarding the PRP0001 device ID ACPI / video: Make acpi_video_unregister_backlight() private acpi-video-detect: Remove old API toshiba-acpi: Port to new backlight interface selection API thinkpad-acpi: Port to new backlight interface selection API sony-laptop: Port to new backlight interface selection API samsung-laptop: Port to new backlight interface selection API msi-wmi: Port to new backlight interface selection API msi-laptop: Port to new backlight interface selection API intel-oaktrail: Port to new backlight interface selection API ideapad-laptop: Port to new backlight interface selection API fujitsu-laptop: Port to new backlight interface selection API eeepc-laptop: Port to new backlight interface selection API dell-wmi: Port to new backlight interface selection API ...
| * ACPI / PCI: remove stale list_head in struct acpi_prt_entryHanjun Guo2015-05-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | list_head "list" in struct acpi_prt_entry was used to connect _PRT entries for PCI irq, but after commit 181380b702ee ("PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers"), the list head for _PRT entries was removed, but left "list" in struct acpi_prt_entry which is useless and stale, remove it now. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PCI: Account for ARI in _PRT lookupsAlex Williamson2015-05-301-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCIe specification, rev 3.0, section 2.2.8.1, contains the following implementation note: Virtual Wire Mapping for INTx Interrupts From ARI Devices The implied Device Number for an ARI Device is 0. When ARI-aware software (including BIOS and operating system) enables ARI Forwarding in the Downstream Port immediately above an ARI Device in order to access its Extended Functions, software must comprehend that the Downstream Port will use Device Number 0 for the virtual wire mappings of INTx interrupts coming from all Functions of the ARI Device. If non-ARI-aware software attempts to determine the virtual wire mappings for Extended Functions, it can come up with incorrect mappings by examining the traditional Device Number field and finding it to be non-0. We account for this in pci_swizzle_interrupt_pin(), but it looks like we miss it here, looking for a _PRT entry with a slot matching the ARI device slot number. This can cause errors like: pcieport 0000:80:03.0: can't derive routing for PCI INT B sfc 0000:82:01.1: PCI INT B: no GSI pci_dev.irq is then invalid, resulting in errors for drivers that attempt to enable INTx on the device. Fix by using slot 0 for ARI enabled devices. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Revert "x86/PCI: Refine the way to release PCI IRQ resources"Rafael J. Wysocki2015-03-201-1/+8
| | | | | | | | | | | | | | | | | | | | | | Commit b4b55cda5874 (Refine the way to release PCI IRQ resources) introduced a regression in the PCI IRQ resource management by causing the IRQ resource of a device, established when pci_enabled_device() is called on a fully disabled device, to be released when the driver is unbound from the device, regardless of the enable_cnt. This leads to the situation that an ill-behaved driver can now make a device unusable to subsequent drivers by an imbalance in their use of pci_enable/disable_device(). That is a serious problem for secondary drivers like vfio-pci, which are innocent of the transgressions of the previous driver. Since the solution of this problem is not immediate and requires further discussion, revert commit b4b55cda5874 and the issue it was supposed to address (a bug related to xen-pciback) will be taken care of in a different way going forward. Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* x86/PCI: Refine the way to release PCI IRQ resourcesJiang Liu2015-02-051-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI device drivers assume that pci_dev->irq won't change after calling pci_disable_device() and pci_enable_device() during suspend and resume. Commit c03b3b0738a5 ("x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled") frees PCI IRQ resources when pci_disable_device() is called and reallocate IRQ resources when pci_enable_device() is called again. This breaks above assumption. So commit 3eec595235c1 ("x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation") and 9eabc99a635a ("x86, irq, PCI: Keep IRQ assignment for runtime power management") fix the issue by avoiding freeing/reallocating IRQ resources during PCI device suspend/resume. They achieve this by checking dev.power.is_prepared and dev.power.runtime_status. PM maintainer, Rafael, then pointed out that it's really an ugly fix which leaking PM internal state information to IRQ subsystem. Recently David Vrabel <david.vrabel@citrix.com> also reports an regression in pciback driver caused by commit cffe0a2b5a34 ("x86, irq: Keep balance of IOAPIC pin reference count"). Please refer to: http://lkml.org/lkml/2015/1/14/546 So this patch refine the way to release PCI IRQ resources. Instead of releasing PCI IRQ resources in pci_disable_device()/ pcibios_disable_device(), we now release it at driver unbinding notification BUS_NOTIFY_UNBOUND_DRIVER. In other word, we only release PCI IRQ resources when there's no driver bound to the PCI device, and it keeps the assumption that pci_dev->irq won't through multiple invocation of pci_enable_device()/pci_disable_device(). Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable()Jiang Liu2015-01-201-1/+0
| | | | | | | | | | | | | | | | | | | | | Xen pciback driver assumes that pci_dev->irq won't change after calling pci_disable_device(). But commit cffe0a2b5a34c95a4dadc9ec7132690a5b0f6687 ("x86, irq: Keep balance of IOAPIC pin reference count") frees irq resources and resets pci_dev->irq to zero when pci_disable_device() is called. So this is a hotfix for 3.19 to avoid resetting pci_dev->irq, and another proper fix will be prepared for next merging window. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Cc: Tony Luck <tony.luck@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1421720467-7709-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds2014-12-191-2/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "After stopping the full x86/apic branch, I took some time to go through the first block of patches again, which are mostly cleanups and preparatory work for the irqdomain conversion and ioapic hotplug support. Unfortunaly one of the real problematic commits was right at the beginning, so I rebased this portion of the pending patches without the offenders. It would be great to get this into 3.19. That makes reworking the problematic parts simpler. The usual tip testing did not unearth any issues and it is fully bisectible now. I'm pretty confident that this wont affect the calmness of the xmas season. Changes: - Split the convoluted io_apic.c code into domain specific parts (vector, ioapic, msi, htirq) - Introduce proper helper functions to retrieve irq specific data instead of open coded dereferencing of pointers - Preparatory work for ioapic hotplug and irqdomain conversion - Removal of the non functional pci-ioapic driver - Removal of unused irq entry stubs - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC allocations for everything which is called from there. - Small cleanups and fixes" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC x86, irq: Move IRQ initialization routines from io_apic.c into vector.c x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h x86, irq: Move HT IRQ related code from io_apic.c into htirq.c x86, irq: Move PCI MSI related code from io_apic.c into msi.c x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities x86, irq: Make UP version of irq_complete_move() an inline stub x86, irq: Move local APIC related code from io_apic.c into vector.c x86, irq: Introduce helpers to access struct irq_cfg x86, irq: Protect __clear_irq_vector() with vector_lock x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx() x86, irq: Refine hw_irq.h to prepare for irqdomain support x86, irq: Convert irq_2_pin list to generic list x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector() x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI x86, irq: Introduce helper to check whether an IOAPIC has been registered ...
| * x86, irq: Keep balance of IOAPIC pin reference countJiang Liu2014-12-161-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To keep balance of IOAPIC pin reference count, we need to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. There are two cases which will cause reentrance. The first case is caused by suspend/hibernation. If pcibios_disable_irq is called during suspending/hibernating, we don't release the assigned IRQ number, otherwise it may break the suspend/hibernation. So late when pcibios_enable_irq is called during resume, we shouldn't allocate IRQ number again. The second case is that function acpi_pci_irq_enable() may be called twice for PCI devices present at boot time as below: 1) pci_acpi_init() --> acpi_pci_irq_enable() if pci_routeirq is true 2) pci_enable_device() --> pcibios_enable_device() --> acpi_pci_irq_enable() We can't kill kernel parameter pci_routeirq yet because it's still needed for debugging purpose. So flag irq_managed is introduced to track whether IRQ number is assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI coreRafael J. Wysocki2014-12-041-1/+1
|/ | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in the ACPI core code. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* x86, irq, PCI: Keep IRQ assignment for runtime power managementJiang Liu2014-08-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins. We need to keep IRQ assignment for PCI devices during runtime power management, otherwise it may cause failure of device wakeups. Commit 3eec595235c17a7 "x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation" has fixed the issue for suspend/ hibernation, we also need the same fix for runtime device sleep too. Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271 Reported-and-Tested-by: EmanueL Czirai <amanual@openmailbox.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: EmanueL Czirai <amanual@openmailbox.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernationJiang Liu2014-08-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins. We need to keep IRQ assignment for PCI devices during suspend/hibernation, otherwise it may cause failure of suspend/hibernation due to: 1) Device driver calls pci_enable_device() to allocate an IRQ number and register interrupt handler on the returned IRQ. 2) Device driver's suspend callback calls pci_disable_device() and release assigned IRQ in turn. 3) Device driver's resume callback calls pci_enable_device() to allocate IRQ number again. A different IRQ number may be assigned by IOAPIC driver this time. 4) Now the hardware delivers interrupt to the new IRQ but interrupt handler is still registered against the old IRQ, so it breaks suspend/hibernation. To fix this issue, we keep IRQ assignment during suspend/hibernation. Flag pci_dev.dev.power.is_prepared is used to detect that pci_disable_device() is called during suspend/hibernation. Reported-and-Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1407478071-29399-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86, irq, ACPI: Release IOAPIC pin when PCI device is disabledJiang Liu2014-06-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | Release IOAPIC pin associated with PCI device when the PCI device is disabled. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Link: http://lkml.kernel.org/r/1402380987-32577-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ACPI / PCI: Do not call ISA-specific code if ISA is not supportedTomasz Nowicki2014-02-201-11/+25
| | | | | | | | | This commit moves ISA-specific code to separate function and makes that function depend on CONFIG_{E}ISA so that we do not have to maintain acpi_isa_irq_to_gsi() function for architectures which do not support ISA. Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()Tomasz Nowicki2014-02-181-0/+1
| | | | | | | | | | | acpi_pci_link_allocate_irq() can return negative gsi even if entry != NULL. For that case we have a memory leak, so free entry before returning from acpi_pci_irq_enable() for gsi < 0. Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: All applicable <stable@vger.kernel.org> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI: Clean up inclusions of ACPI header filesLv Zheng2013-12-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbersYinghai Lu2013-02-161-68/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12) contents and associated each _PRT entry with a PCI bus number. The bus number association means dependencies on PCI device enumeration and bus number assignment, as well as on the PCI/ACPI binding process. After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"), these dependencies caused the IRQ issues reported by Peter: pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode) pci 0000:00:1e.0: can't derive routing for PCI INT A snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5 irq 18: nobody cared (try booting with the "irqpoll" option) This patch removes _PRT caching. Instead, we evaluate _PRT as needed in the pci_enable_device() path. This also removes the dependency on PCI bus numbers: we can simply look at the _PRT associated with each bridge as we walk upstream toward the root. [bhelgaas: changelog] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561 Reported-and-tested-by: Peter Hurley <peter@hurleysoftware.com> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2012-12-131-9/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
| * ACPI: Pass segment/bus to _PRT add/del so they don't depend on pci_busBjorn Helgaas2012-11-051-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | This effectively reverts 859a3f86ca8 ("ACPI: simplify acpi_pci_irq_add_prt() API") and d9efae3688a ("ACPI: simplify acpi_pci_irq_del_prt() API"). The reason is to disentangle these routines from the struct pci_bus. We want to be able to add the _PRT before the struct pci_bus exists, and delete the _PRT after we've removed the pci_bus. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
* | Merge branch 'acpi-general'Rafael J. Wysocki2012-11-291-5/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-general: (38 commits) ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device() ACPI: Fix logging when no pci_irq is allocated ACPI: Update Dock hotplug error messages ACPI: Update Container hotplug error messages ACPI: Update Memory hotplug error messages ACPI: Update CPU hotplug error messages ACPI: Add acpi_handle_<level>() interfaces ACPI: remove use of __devexit ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist. ACPI / battery: Correct battery capacity values on Thinkpads Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info" ACPI: create _SUN sysfs file ACPI / memhotplug: bind the memory device when the driver is being loaded ACPI / memhotplug: don't allow to eject the memory device if it is being used ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug ACPI / memhotplug: deal with eject request in hotplug queue ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove() ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device ... Conflicts: include/linux/acpi.h (two additions at the end of the same file)
| * | ACPI: Fix logging when no pci_irq is allocatedJoe Perches2012-11-211-5/+5
| |/ | | | | | | | | | | | | | | Work around a defect in the printk subsystem introduced by a logging change. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* / ACPI / x86: Export acpi_[un]register_gsi()Andy Shevchenko2012-11-151-5/+0
|/ | | | | | | | | | | | | | | These functions might be called from modules as well so make sure they are exported. In addition, implement empty version of acpi_unregister_gsi() and remove the one from pci_irq.c. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PCI/PM/Runtime: make PCI traces quieterVincent Palatin2012-01-061-5/+5
| | | | | | | | | | | When the runtime PM is activated on PCI, if a device switches state frequently (e.g. an EHCI controller with autosuspending USB devices connected) the PCI configuration traces might be very verbose in the kernel log. Let's guard those traces with DEBUG condition. Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQSStefan Assmann2011-07-161-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following was observed by Steve Rostedt on 3.0.0-rc5 Backtrace: irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 65, comm: irq/16-uhci_hcd Not tainted 3.0.0-rc5-test+ #94 Call Trace: [<ffffffff810aa643>] __report_bad_irq+0x37/0xc1 [<ffffffff810aaa2d>] note_interrupt+0x14e/0x1c9 [<ffffffff810a9a05>] ? irq_thread_fn+0x3c/0x3c [<ffffffff810a990e>] irq_thread+0xf6/0x1b1 [<ffffffff810a9818>] ? irq_finalize_oneshot+0xb3/0xb3 [<ffffffff8106b4d6>] kthread+0x9f/0xa7 [<ffffffff814f1f04>] kernel_thread_helper+0x4/0x10 [<ffffffff8103ca09>] ? finish_task_switch+0x7b/0xc0 [<ffffffff814eac78>] ? retint_restore_args+0x13/0x13 [<ffffffff8106b437>] ? __init_kthread_worker+0x5a/0x5a [<ffffffff814f1f00>] ? gs_change+0x13/0x13 handlers: [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq Disabling IRQ #16 The problem being that a device triggers boot interrupts (due to threaded interrupt handling and masking of the IO-APIC), which are forwarded to the PIRQ line of the device. These interrupts are not handled on the PIRQ line because the interrupt handler is not present there. This should have already been fixed by CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS. However some parts of the quirk got lost in the ACPI merge. This is a resent of the patch proposed in 2009. See http://lkml.org/lkml/2009/9/7/192 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: remove unused declaration of proc_fs.hZhang Rui2010-10-151-1/+0
| | | | | | | Remove unused declaration of proc_fs.h. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* x86, acpi/irq: pci device dev->irq is an isa irq not a gsiEric W. Biederman2010-05-041-3/+5
| | | | | | | | | | | Strictly speaking on x86 (where acpi is used) dev->irq must be a dual i8259 irq input aka an isa irq. Therefore we should translate that isa irq into a gsi before passing it to a function that takes a gsi. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> LKML-Reference: <1269936436-7039-3-git-send-email-ebiederm@xmission.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown2009-08-281-0/+2
| | | | | | | | | | | | | Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
*-. Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown2009-06-241-8/+9
|\ \ | | | | | | | | | 'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
| | * ACPI: simplify acpi_pci_irq_del_prt() APIAlexander Chiang2009-06-171-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to pass a segment/bus tuple to this API, as the callsite always has a struct pci_bus. We can derive segment/bus from the struct pci_bus, so let's take this opportunit to simplify the API and make life easier for the callers. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI: simplify acpi_pci_irq_add_prt() APIAlexander Chiang2009-06-171-5/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | A PCI domain cannot change as you descend down subordinate buses, which makes the 'segment' argument to acpi_pci_irq_add_prt() useless. Change the interface to take a struct pci_bus *, from whence we can derive the bus number and segment. Reducing the number of arguments makes life simpler for callers. Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
* / irq: change ACPI GSI APIs to also take a device argumentYinghai Lu2009-04-281-2/+3
|/ | | | | | | | | | | | | | | | | | | | | We want to use dev_to_node() later on, to be aware of the 'home node' of the GSI in question. [ Impact: cleanup, prepare the IRQ code to be more NUMA aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-acpi@vger.kernel.org Cc: linux-ia64@vger.kernel.org LKML-Reference: <49F65560.20904@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'misc' into releaseLen Brown2009-04-051-8/+8
|\
| * ACPI: constify tables in pci_irq.cJan Beulich2009-04-031-8/+8
| | | | | | | | | | Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: PCI: use generic pci_swizzle_interrupt_pin()Bjorn Helgaas2009-03-171-1/+1
|/ | | | | | | Use the generic pci_swizzle_interrupt_pin() instead of ACPI-specific code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: PCI: add HP copyrightBjorn Helgaas2008-12-301-0/+2
| | | | | | | Add HP copyright to pci_irq.c. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 07:15:03 +0000