summaryrefslogtreecommitdiffstats
path: root/drivers/amba
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()Isaac Manjarres2022-08-301-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit f2d3b9a46e0e ("ARM: 9220/1: amba: Remove deferred device addition"), it became possible for amba_read_periphid() to be invoked concurrently from two threads for a particular AMBA device. Consider the case where a thread (T0) is registering an AMBA driver, and searching for all of the devices it can match with on the AMBA bus. Suppose that another thread (T1) is executing the deferred probe work, and is searching through all of the AMBA drivers on the bus for a driver that matches a particular AMBA device. Assume that both threads begin operating on the same AMBA device and the device's peripheral ID is still unknown. In this scenario, the amba_match() function will be invoked for the same AMBA device by both threads, which means amba_read_periphid() can also be invoked by both threads, and both threads will be able to manipulate the AMBA device's pclk pointer without any synchronization. It's possible that one thread will initialize the pclk pointer, then the other thread will re-initialize it, overwriting the previous value, and both will race to free the same pclk, resulting in a use-after-free for whichever thread frees the pclk last. Add a lock per AMBA device to synchronize the handling with detecting the peripheral ID to avoid the use-after-free scenario. The following KFENCE bug report helped detect this problem: ================================================================== BUG: KFENCE: use-after-free read in clk_disable+0x14/0x34 Use-after-free read at 0x(ptrval) (in kfence-#19): clk_disable+0x14/0x34 amba_read_periphid+0xdc/0x134 amba_match+0x3c/0x84 __driver_attach+0x20/0x158 bus_for_each_dev+0x74/0xc0 bus_add_driver+0x154/0x1e8 driver_register+0x88/0x11c do_one_initcall+0x8c/0x2fc kernel_init_freeable+0x190/0x220 kernel_init+0x10/0x108 ret_from_fork+0x14/0x3c 0x0 kfence-#19: 0x(ptrval)-0x(ptrval), size=36, cache=kmalloc-64 allocated by task 8 on cpu 0 at 11.629931s: clk_hw_create_clk+0x38/0x134 amba_get_enable_pclk+0x10/0x68 amba_read_periphid+0x28/0x134 amba_match+0x3c/0x84 __device_attach_driver+0x2c/0xc4 bus_for_each_drv+0x80/0xd0 __device_attach+0xb0/0x1f0 bus_probe_device+0x88/0x90 deferred_probe_work_func+0x8c/0xc0 process_one_work+0x23c/0x690 worker_thread+0x34/0x488 kthread+0xd4/0xfc ret_from_fork+0x14/0x3c 0x0 freed by task 8 on cpu 0 at 11.630095s: amba_read_periphid+0xec/0x134 amba_match+0x3c/0x84 __device_attach_driver+0x2c/0xc4 bus_for_each_drv+0x80/0xd0 __device_attach+0xb0/0x1f0 bus_probe_device+0x88/0x90 deferred_probe_work_func+0x8c/0xc0 process_one_work+0x23c/0x690 worker_thread+0x34/0x488 kthread+0xd4/0xfc ret_from_fork+0x14/0x3c 0x0 Cc: Saravana Kannan <saravanak@google.com> Cc: patches@armlinux.org.uk Fixes: f2d3b9a46e0e ("ARM: 9220/1: amba: Remove deferred device addition") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9220/1: amba: Remove deferred device additionSaravana Kannan2022-07-281-168/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uevents generated for an amba device need PID and CID information that's available only when the amba device is powered on, clocked and out of reset. So, if those resources aren't available, the information can't be read to generate the uevents. To workaround this requirement, if the resources weren't available, the device addition was deferred and retried periodically. However, this deferred addition retry isn't based on resources becoming available. Instead, it's retried every 5 seconds and causes arbitrary probe delays for amba devices and their consumers. Also, maintaining a separate deferred-probe like mechanism is maintenance headache. With this commit, instead of deferring the device addition, we simply defer the generation of uevents for the device and probing of the device (because drivers needs PID and CID to match) until the PID and CID information can be read. This allows us to delete all the amba specific deferring code and also avoid the arbitrary probing delays. Cc: Rob Herring <robh@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: patches@armlinux.org.uk Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9207/1: amba: fix refcount underflow if amba_device_add() failsWang Kefeng2022-07-141-6/+2
| | | | | | | | | | | | | | "ARM: 9192/1: amba: fix memory leak in amba_device_try_add()" leads to a refcount underflow if amba_device_add() fails, which called by of_amba_device_create(), the of_amba_device_create() already exists the error handling, so amba_put_device() only need to be added into amba_deferred_retry(). Fixes: 7719a68b2fa4 ("ARM: 9192/1: amba: fix memory leak in amba_device_try_add()") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* Merge tag 'driver-core-5.19-rc1' of ↵Linus Torvalds2022-06-031-24/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...
| * amba: Use driver_set_override() instead of open-codingKrzysztof Kozlowski2022-04-221-24/+4
| | | | | | | | | | | | | | | | | | | | Use a helper to set driver_override to reduce the amount of duplicated code. Make the driver_override field const char, because it is not modified by the core and it matches other subsystems. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220419113435.246203-3-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'iommu-updates-v5.19' of ↵Linus Torvalds2022-05-311-1/+36
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Intel VT-d driver updates: - Domain force snooping improvement. - Cleanups, no intentional functional changes. - ARM SMMU driver updates: - Add new Qualcomm device-tree compatible strings - Add new Nvidia device-tree compatible string for Tegra234 - Fix UAF in SMMUv3 shared virtual addressing code - Force identity-mapped domains for users of ye olde SMMU legacy binding - Minor cleanups - Fix a BUG_ON in the vfio_iommu_group_notifier: - Groundwork for upcoming iommufd framework - Introduction of DMA ownership so that an entire IOMMU group is either controlled by the kernel or by user-space - MT8195 and MT8186 support in the Mediatek IOMMU driver - Make forcing of cache-coherent DMA more coherent between IOMMU drivers - Fixes for thunderbolt device DMA protection - Various smaller fixes and cleanups * tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits) iommu/amd: Increase timeout waiting for GA log enablement iommu/s390: Tolerate repeat attach_dev calls iommu/vt-d: Remove hard coding PGSNP bit in PASID entries iommu/vt-d: Remove domain_update_iommu_snooping() iommu/vt-d: Check domain force_snooping against attached devices iommu/vt-d: Block force-snoop domain attaching if no SC support iommu/vt-d: Size Page Request Queue to avoid overflow condition iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller iommu/vt-d: Change return type of dmar_insert_one_dev_info() iommu/vt-d: Remove unneeded validity check on dev iommu/dma: Explicitly sort PCI DMA windows iommu/dma: Fix iova map result check bug iommu/mediatek: Fix NULL pointer dereference when printing dev_name iommu: iommu_group_claim_dma_owner() must always assign a domain iommu/arm-smmu: Force identity domains for legacy binding iommu/arm-smmu: Support Tegra234 SMMU dt-bindings: arm-smmu: Add compatible for Tegra234 SOC dt-bindings: arm-smmu: Document nvidia,memory-controller property iommu/arm-smmu-qcom: Add SC8280XP support dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP ...
| * | bus: platform,amba,fsl-mc,PCI: Add device DMA ownership managementLu Baolu2022-04-281-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The devices on platform/amba/fsl-mc/PCI buses could be bound to drivers with the device DMA managed by kernel drivers or user-space applications. Unfortunately, multiple devices may be placed in the same IOMMU group because they cannot be isolated from each other. The DMA on these devices must either be entirely under kernel control or userspace control, never a mixture. Otherwise the driver integrity is not guaranteed because they could access each other through the peer-to-peer accesses which by-pass the IOMMU protection. This checks and sets the default DMA mode during driver binding, and cleanups during driver unbinding. In the default mode, the device DMA is managed by the device driver which handles DMA operations through the kernel DMA APIs (see Documentation/core-api/dma-api.rst). For cases where the devices are assigned for userspace control through the userspace driver framework(i.e. VFIO), the drivers(for example, vfio_pci/ vfio_platfrom etc.) may set a new flag (driver_managed_dma) to skip this default setting in the assumption that the drivers know what they are doing with the device DMA. Calling iommu_device_use_default_domain() before {of,acpi}_dma_configure is currently a problem. As things stand, the IOMMU driver ignored the initial iommu_probe_device() call when the device was added, since at that point it had no fwspec yet. In this situation, {of,acpi}_iommu_configure() are retriggering iommu_probe_device() after the IOMMU driver has seen the firmware data via .of_xlate to learn that it actually responsible for the given device. As the result, before that gets fixed, iommu_use_default_domain() goes at the end, and calls arch_teardown_dma_ops() if it fails. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20220418005000.897664-5-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * | amba: Stop sharing platform_dma_configure()Lu Baolu2022-04-281-1/+18
| |/ | | | | | | | | | | | | | | | | | | Stop sharing platform_dma_configure() helper as they are about to have their own bus dma_configure callbacks. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220418005000.897664-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
* | ARM: 9192/1: amba: fix memory leak in amba_device_try_add()Wang Kefeng2022-05-201-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If amba_device_try_add() return error code (not EPROBE_DEFER), memory leak occurred when amba device fails to read periphid. unreferenced object 0xc1c60800 (size 1024): comm "swapper/0", pid 1, jiffies 4294937333 (age 75.200s) hex dump (first 32 bytes): 40 40 db c1 04 08 c6 c1 04 08 c6 c1 00 00 00 00 @@.............. 00 d9 c1 c1 84 6f 38 c1 00 00 00 00 01 00 00 00 .....o8......... backtrace: [<(ptrval)>] kmem_cache_alloc_trace+0x168/0x2b4 [<(ptrval)>] amba_device_alloc+0x38/0x7c [<(ptrval)>] of_platform_bus_create+0x2f4/0x4e8 [<(ptrval)>] of_platform_bus_create+0x380/0x4e8 [<(ptrval)>] of_platform_bus_create+0x380/0x4e8 [<(ptrval)>] of_platform_bus_create+0x380/0x4e8 [<(ptrval)>] of_platform_populate+0x70/0xc4 [<(ptrval)>] of_platform_default_populate_init+0xb4/0xcc [<(ptrval)>] do_one_initcall+0x58/0x218 [<(ptrval)>] kernel_init_freeable+0x250/0x29c [<(ptrval)>] kernel_init+0x24/0x148 [<(ptrval)>] ret_from_fork+0x14/0x1c [<00000000>] 0x0 unreferenced object 0xc1db4040 (size 64): comm "swapper/0", pid 1, jiffies 4294937333 (age 75.200s) hex dump (first 32 bytes): 31 63 30 66 30 30 30 30 2e 77 64 74 00 00 00 00 1c0f0000.wdt.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(ptrval)>] __kmalloc_track_caller+0x19c/0x2f8 [<(ptrval)>] kvasprintf+0x60/0xcc [<(ptrval)>] kvasprintf_const+0x54/0x78 [<(ptrval)>] kobject_set_name_vargs+0x34/0xa8 [<(ptrval)>] dev_set_name+0x40/0x5c [<(ptrval)>] of_device_make_bus_id+0x128/0x1f8 [<(ptrval)>] of_platform_bus_create+0x4dc/0x4e8 [<(ptrval)>] of_platform_bus_create+0x380/0x4e8 [<(ptrval)>] of_platform_bus_create+0x380/0x4e8 [<(ptrval)>] of_platform_bus_create+0x380/0x4e8 [<(ptrval)>] of_platform_populate+0x70/0xc4 [<(ptrval)>] of_platform_default_populate_init+0xb4/0xcc [<(ptrval)>] do_one_initcall+0x58/0x218 [<(ptrval)>] kernel_init_freeable+0x250/0x29c [<(ptrval)>] kernel_init+0x24/0x148 [<(ptrval)>] ret_from_fork+0x14/0x1c Fix them by adding amba_device_put() to release device name and amba device. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* | ARM: 9193/1: amba: Add amba_read_periphid() helperWang Kefeng2022-05-201-71/+62
|/ | | | | | | Add new amba_read_periphid() helper to simplify error handling. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9174/1: amba: Move EXPORT_SYMBOL() closer to definitionWang Kefeng2022-02-281-7/+5
| | | | | | | | | Some EXPORT_SYMBOL() is at the end of the function, but some is at the end of file. For reader sanity and be consistent, move all EXPORT_SYMBOL() declarations just after the end of the function. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9173/1: amba: kill amba_find_match()Wang Kefeng2022-02-281-61/+0
| | | | | | | There is no one use amba_find_match(), kill it. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9163/1: amba: Move of_amba_device_decode_irq() into amba_probe()Wang Kefeng2021-12-171-26/+26
| | | | | | | | Similar to other resources the AMBA bus "gets" for the device, move irq obtain from amba_device_add() to amba_probe(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9162/1: amba: Kill sysfs attribute file of irqWang Kefeng2021-12-171-17/+2
| | | | | | | | | | | | As Rob said[1], there doesn't seem to be any users about the sysfs attribute file of irq[0] and irq[1]. And we don't need to include <asm/irq.h> as NO_IRQ has gone. Let's kill both of them. [1] https://lkml.org/lkml/2021/8/25/461 Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9119/1: amba: Properly handle device probe without IRQ domainWang Kefeng2021-10-191-0/+27
| | | | | | | | | | | | | | | | | | | | | | of_amba_device_create() uses irq_of_parse_and_map() to translate a DT interrupt specification into a Linux virtual interrupt number. But it doesn't properly handle the case where the interrupt controller is not yet available, eg, when pl011 interrupt is connected to MBIGEN interrupt controller, because the mbigen initialization is too late, which will lead to no IRQ due to no IRQ domain found, log is shown below, "irq: no irq domain found for uart0 !" use of_irq_get() to return -EPROBE_DEFER as above, and in the function amba_device_try_add()/amba_device_add(), it will properly handle in such case, also return 0 in other fail cases to be consistent as before. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Reported-by: Ruizhe Lin <linruizhe@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"Wang Kefeng2021-10-191-3/+0
| | | | | | | | | | | | | | | | | | | After commit 77a7300abad7 ("of/irq: Get rid of NO_IRQ usage"), no irq case has been removed, irq_of_parse_and_map() will return 0 in all cases when get error from parse and map an interrupt into linux virq space. amba_device_register() is only used on no-DT initialization, see s3c64xx_pl080_init() arch/arm/mach-s3c/pl080.c ep93xx_init_devices() arch/arm/mach-ep93xx/core.c They won't set -1 to irq[0], so no need the warn. This reverts commit 2eac58d5026e4ec8b17ff8b62877fea9e1d2f1b3. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* ARM: 9121/1: amba: Drop unused functions about APB/AHB devices addWang Kefeng2021-10-191-72/+0
| | | | | | | | | | | | | | | No one use the following functions, kill them. amba_aphb_device_add() amba_apb_device_add() amba_apb_device_add_res() amba_ahb_device_add() amba_ahb_device_add_res() Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
* bus: Make remove callback return voidUwe Kleine-König2021-07-211-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* amba: Make use of bus_type functionsUwe Kleine-König2021-02-021-77/+81
| | | | | | | | | | | | | | | Instead of assigning the needed functions for each driver separately do it only once in amba_bustype. Move the definition of the functions to their proper place among the other callbacks used there. Note that the bus's shutdown function might be called for unbound devices, too, so it needs additional guarding. This prepares getting rid of these callbacks in struct device_driver. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210126165835.687514-6-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* amba: Make the remove callback return voidUwe Kleine-König2021-02-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* amba: reorder functionsUwe Kleine-König2021-02-021-38/+39
| | | | | | | | | | | Put helpers (here: amba_get_enable_pclk and amba_put_disable_pclk) at the top of the file and then define callbacks directly before the structs they are used in; in the same order. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210126165835.687514-3-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* amba: Fix resource leak for drivers without .removeUwe Kleine-König2021-02-021-8/+12
| | | | | | | | | | | | | | | | | | Consider an amba driver with a .probe but without a .remove callback (e.g. pl061_gpio_driver). The function amba_probe() is called to bind a device and so dev_pm_domain_attach() and others are called. As there is no remove callback amba_remove() isn't called at unbind time however and so calling dev_pm_domain_detach() is missed and the pm domain keeps active. To fix this always use the core driver callbacks and handle missing amba callbacks there. For probe refuse registration as a driver without probe doesn't make sense. Fixes: 7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* ARM: tegra: Replace zero-length array with flexible-arrayGustavo A. R. Silva2020-06-151-1/+1
| | | | | | | | | | | | There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2020-06-041-3/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
| * amba: Retry adding deferred devices at late_initcallRob Herring2020-05-051-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If amba bus devices defer when adding, the amba bus code simply retries adding the devices every 5 seconds. This doesn't work well as it completely unsynchronized with starting the init process which can happen in less than 5 secs. Add a retry during late_initcall. If the amba devices are added, then deferred probe takes over. If the dependencies have not probed at this point, then there's no improvement over previous behavior. To completely solve this, we'd need to retry after every successful probe as deferred probe does. The list_empty() check now happens outside the mutex, but the mutex wasn't necessary in the first place. This needed to use deferred probe instead of fragile initcall ordering on 32-bit VExpress systems where the apb_pclk has a number of probe dependencies (vexpress-sysregs, vexpress-config). Cc: John Stultz <john.stultz@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Russell King <linux@armlinux.org.uk> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
* | amba: Initialize dma_parms for amba devicesUlf Hansson2020-04-281-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | It's currently the amba driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common amba bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@armlinux.org.uk> Cc: <stable@vger.kernel.org> Tested-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200422101013.31267-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2019-10-231-3/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | :Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling
| * drivers/amba: fix reset control error handlingRussell King2019-10-091-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") it is possible for the the amba bus driver to defer probing the device for its IDs because the reset driver may be probed later. However when a subsequent probe occurs, the call to request_resource() in the driver returns -EBUSY as the driver has not released the resource from the initial probe attempt - or cleaned up any of the preceding actions. Fix this both for the deferred probe case as well as a failure to get the reset. Fixes: 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") Reported-by: Dinh Nguyen <dinguyen@kernel.org> Tested-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* | Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2019-09-221-0/+14
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...
| * ARM: 8906/1: drivers/amba: add reset control to amba bus probeDINH L NGUYEN2019-09-101-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The primecell controller on some SoCs, i.e. SoCFPGA, is held in reset by default. Until recently, the DMA controller was brought out of reset by the bootloader(i.e. U-Boot). But a recent change in U-Boot, the peripherals that are not used are held in reset and are left to Linux to bring them out of reset. Add a mechanism for getting the reset property and de-assert the primecell module from reset if found. This is a not a hard fail if the reset property is not present in the device tree node, so the driver will continue to probe. Because there are different variants of the controller that may have multiple reset signals, the code will find all reset(s) specified and de-assert them. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* | drivers: Introduce device lookup variants by of_nodeSuzuki K Poulose2019-07-301-10/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce wrappers for {bus/driver/class}_find_device() to locate devices by its of_node. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: devicetree@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-i2c@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Alan Tull <atull@kernel.org> Cc: linux-fpga@vger.kernel.org Cc: Peter Rosin <peda@axentia.se> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thor Thayer <thor.thayer@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Peter Rosin <peda@axentia.se> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # I2C part Acked-by: Moritz Fischer <mdf@kernel.org> # For FPGA part Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20190723221838.12024-3-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds2019-07-121-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
| * driver_find_device: Unify the match function with class_find_device()Suzuki K Poulose2019-06-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver_find_device() accepts a match function pointer to filter the devices for lookup, similar to bus/class_find_device(). However, there is a minor difference in the prototype for the match parameter for driver_find_device() with the now unified version accepted by {bus/class}_find_device(), where it doesn't accept a "const" qualifier for the data argument. This prevents us from reusing the generic match functions for driver_find_device(). For this reason, change the prototype of the driver_find_device() to make the "match" parameter in line with {bus/class}_find_device() and adjust its callers to use the const qualifier. Also, we could now promote the "data" parameter to const as we pass it down as a const parameter to the match functions. Cc: Corey Minyard <minyard@acm.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner2019-06-051-10/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* amba: tegra-ahb: Mark PM functions as __maybe_unusedArnd Bergmann2019-05-081-4/+2
| | | | | | | | | | | | | clang warns about an unused variable when CONFIG_PM is disabled, since it is only referenced from an #ifdef: drivers/amba/tegra-ahb.c:97:18: error: variable 'tegra_ahb_gizmo' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] Rather than trying to get the #ifdef right, remove it and use __maybe_unused here, which is less error prone. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: 8836/1: drivers: amba: Update component matching to use the CoreSight ↵Mike Leach2019-02-261-8/+37
| | | | | | | | | | | | | | | | | | | UCI values. The patches provide an update of amba_device and matching code to handle the additional registers required for the Class 0x9 (CoreSight) UCI. The *data pointer in the amba_id is used by the driver to provide extended ID register values for matching. CoreSight components where PID/CID pair is currently sufficient for unique identification need not provide this additional information. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2018-06-061-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: - Initial round of Spectre variant 1 and variant 2 fixes for 32-bit ARM - Clang support improvements - nommu updates for v8 MPU - enable ARM_MODULE_PLTS by default to avoid problems loading modules with larger kernels - vmlinux.lds and dma-mapping cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits) ARM: spectre-v1: fix syscall entry ARM: spectre-v1: add array_index_mask_nospec() implementation ARM: spectre-v1: add speculation barrier (csdb) macros ARM: KVM: report support for SMCCC_ARCH_WORKAROUND_1 ARM: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling ARM: spectre-v2: KVM: invalidate icache on guest exit for Brahma B15 ARM: KVM: invalidate icache on guest exit for Cortex-A15 ARM: KVM: invalidate BTB on guest exit for Cortex-A12/A17 ARM: spectre-v2: warn about incorrect context switching functions ARM: spectre-v2: add firmware based hardening ARM: spectre-v2: harden user aborts in kernel space ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit ARM: spectre-v2: harden branch predictor on context switches ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre ARM: bugs: add support for per-processor bug checking ARM: bugs: hook processor bug checking into SMP and suspend paths ARM: bugs: prepare processor bug infrastructure ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs ARM: 8774/1: remove no-op macro VMLINUX_SYMBOL() ARM: 8773/1: amba: Export amba_bustype ...
| * ARM: 8773/1: amba: Export amba_bustypeKim Phillips2018-05-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is provided in the context of allowing the Coresight driver subsystem to be loaded as modules. Coresight uses amba_bus in its call to bus_find_device() in of_coresight_get_endpoint_device() when searching for a configurable endpoint device. This patch allows Coresight to reference amba_bustype when built as a module. [original LKML submission here: https://lkml.org/lkml/2018/5/9/520] Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Todd Kjos <tkjos@google.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* | Merge tag 'char-misc-4.18-rc1' of ↵Linus Torvalds2018-06-051-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the "big" char and misc driver patches for 4.18-rc1. It's not a lot of stuff here, but there are some highlights: - coreboot driver updates - soundwire driver updates - android binder updates - fpga big sync, mostly documentation - lots of minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits) vmw_balloon: fixing double free when batching mode is off MAINTAINERS: Add driver-api/fpga path fpga: clarify that unregister functions also free documentation: fpga: move fpga-region.txt to driver-api documentation: fpga: add bridge document to driver-api documentation: fpga: move fpga-mgr.txt to driver-api Documentation: fpga: move fpga overview to driver-api fpga: region: kernel-doc fixes fpga: bridge: kernel-doc fixes fpga: mgr: kernel-doc fixes fpga: use SPDX fpga: region: change api, add fpga_region_create/free fpga: bridge: change api, don't use drvdata fpga: manager: change api, don't use drvdata fpga: region: don't use drvdata in common fpga code Drivers: hv: vmbus: Removed an unnecessary cast from void * ver_linux: Drop redundant calls to system() to test if file is readable ver_linux: Move stderr redirection from function parameter to function body misc: IBM Virtual Management Channel Driver (VMC) rpmsg: Correct support for MODULE_DEVICE_TABLE() ...
| * | ARM: amba: Fix wrong indentation in driver_override_store()Geert Uytterhoeven2018-05-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Indentation is one TAB and 7 spaces instead of 2 TABs. Fixes: 3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Todd Kjos <tkjos@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'pm-4.18-rc1' of ↵Linus Torvalds2018-06-051-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a significant update of the generic power domains (genpd) and Operating Performance Points (OPP) frameworks, mostly related to the introduction of power domain performance levels, cpufreq updates (new driver for Qualcomm Kryo processors, updates of the existing drivers, some core fixes, schedutil governor improvements), PCI power management fixes, ACPI workaround for EC-based wakeup events handling on resume from suspend-to-idle, and major updates of the turbostat and pm-graph utilities. Specifics: - Introduce power domain performance levels into the the generic power domains (genpd) and Operating Performance Points (OPP) frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter). - Fix two issues in the runtime PM framework related to the initialization and removal of devices using device links (Ulf Hansson). - Clean up the initialization of drivers for devices in PM domains (Ulf Hansson, Geert Uytterhoeven). - Fix a cpufreq core issue related to the policy sysfs interface causing CPU online to fail for CPUs sharing one cpufreq policy in some situations (Tao Wang). - Make it possible to use platform-specific suspend/resume hooks in the cpufreq-dt driver and make the Armada 37xx DVFS use that feature (Viresh Kumar, Miquel Raynal). - Optimize policy transition notifications in cpufreq (Viresh Kumar). - Improve the iowait boost mechanism in the schedutil cpufreq governor (Patrick Bellasi). - Improve the handling of deferred frequency updates in the schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki, Viresh Kumar). - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin). - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh Kumar). - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set and update stale comments in the PCI core PM code (Rafael Wysocki). - Work around an issue related to the handling of EC-based wakeup events in the ACPI PM core during resume from suspend-to-idle if the EC has been put into the low-power mode (Rafael Wysocki). - Improve the handling of wakeup source objects in the PM core (Doug Berger, Mahendran Ganesh, Rafael Wysocki). - Update the driver core to prevent deferred probe from breaking suspend/resume ordering (Feng Kan). - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael Wysocki). - Make the core suspend/resume code and cpufreq support the RT patch (Sebastian Andrzej Siewior, Thomas Gleixner). - Consolidate the PM QoS handling in cpuidle governors (Rafael Wysocki). - Fix a possible crash in the hibernation core (Tetsuo Handa). - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Update the turbostat utility (fixes, cleanups, new CPU IDs, new command line options, built-in "Low Power Idle" counters support, new POLL and POLL% columns) and add an entry for it to MAINTAINERS (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner, Prarit Bhargava, Srinivas Pandruvada). - Update the pm-graph to version 5.1 (Todd Brandt). - Update the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits) tools/power turbostat: update version number tools/power turbostat: Add Node in output tools/power turbostat: add node information into turbostat calculations tools/power turbostat: remove num_ from cpu_topology struct tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node tools/power turbostat: track thread ID in cpu_topology tools/power turbostat: Calculate additional node information for a package tools/power turbostat: Fix node and siblings lookup data tools/power turbostat: set max_num_cpus equal to the cpumask length tools/power turbostat: if --num_iterations, print for specific number of iterations tools/power turbostat: Add Cannon Lake support tools/power turbostat: delete duplicate #defines x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: add POLL and POLL% column tools/power turbostat: Fix --hide Pk%pc10 tools/power turbostat: Build-in "Low Power Idle" counters support tools/power turbostat: Don't make man pages executable tools/power turbostat: remove blank lines tools/power turbostat: a small C-states dump readability immprovement ...
| * | | amba: Respect all error codes from dev_pm_domain_attach()Ulf Hansson2018-05-141-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | The limitation of being able to check only for -EPROBE_DEFER from dev_pm_domain_attach() has been removed. Hence let's respect all error codes and bail out accordingly. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | drivers: remove force dma flag from busesChristoph Hellwig2018-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With each bus implementing its own DMA configuration callback, there is no need for bus to explicitly set the force_dma flag. Modify the of_dma_configure function to accept an input parameter which specifies if implicit DMA configuration is required when it is not described by the firmware. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Reviewed-by: Rob Herring <robh@kernel.org> [hch: tweaked the changelog a bit] Signed-off-by: Christoph Hellwig <hch@lst.de>
* | | dma-mapping: move dma configuration to bus infrastructureNipun Gupta2018-05-031-0/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI/OF support for configuration of DMA is a bus specific aspect, and thus should be configured by the bus. Introduces a 'dma_configure' bus method so that busses can control their DMA capabilities. Also update the PCI, Platform, ACPI and host1x buses to use the new method. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [hch: simplified host1x_dma_configure based on a comment from Thierry, rewrote changelog] Signed-off-by: Christoph Hellwig <hch@lst.de>
* | ARM: amba: Fix race condition with driver_overrideGeert Uytterhoeven2018-04-261-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver_override implementation is susceptible to a race condition when different threads are reading vs storing a different driver override. Add locking to avoid this race condition. Cfr. commits 6265539776a0810b ("driver core: platform: fix race condition with driver_override") and 9561475db680f714 ("PCI: Fix race condition with driver_override"). Fixes: 3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ARM: amba: Make driver_override output consistent with other busesGeert Uytterhoeven2018-04-261-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For AMBA devices with unconfigured driver override, the "driver_override" sysfs virtual file is empty, while it contains "(null)" for platform and PCI devices. Make AMBA consistent with other buses by dropping the test for a NULL pointer. Note that contrary to popular belief, sprintf() handles NULL pointers fine; they are printed as "(null)". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Reviewed-by: Todd Kjos <tkjos@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Revert "ARM: amba: Fix race condition with driver_override"Greg Kroah-Hartman2018-04-261-9/+2
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 6b614a87f3f477571e319281e84dba11e0ea0a76. My backport was incorrect, as Geert pointed out :( Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ARM: amba: Don't read past the end of sysfs "driver_override" bufferGeert Uytterhoeven2018-04-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count + 1 bytes for printing. Cfr. commits 4efe874aace57dba ("PCI: Don't read past the end of sysfs "driver_override" buffer") and bf563b01c2895a4b ("driver core: platform: Don't read past the end of "driver_override" buffer"). Fixes: 3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:50:32 +0000