summaryrefslogtreecommitdiffstats
path: root/drivers/ata/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* ahci_imx: add ahci sata support on imx platformsRichard Zhu2013-07-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | imx6q contains one Synopsys AHCI SATA controller, But it can't share ahci_platform driver with other controllers because there are some misalignments of the generic AHCI controller - the bits definitions of the HBA registers, the Vendor Specific registers, the AHCI PHY clock and the AHCI signals adjustment window(GPR13 register). - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0', should be configured to be '1' - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL should be set to be '1'.(default 0) - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be configured regarding to the frequency of AHB bus clock. - Configurations of the AHCI PHY clock, and the signal parameters of the GPR13 Setup its own ahci sata driver, contained the imx6q specific initialized codes, re-use the generic ahci_platform driver, and keep the generic ahci_platform driver clean as much as possible. tj: patch description reformatted Signed-off-by: Richard Zhu <r65037@freescale.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
* libata: add R-Car SATA driverVladimir Barinov2013-02-201-0/+1
| | | | | | | | | Add Renesas R-Car on-chip 3Gbps SATA controller driver. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> [Sergei: few bugs fixed, significant cleanup] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: identify and init ZPODD devicesAaron Lu2013-01-211-0/+1
| | | | | | | | | | | | | | | | | | | The ODD can be enabled for ZPODD if the following three conditions are satisfied: 1 The ODD supports device attention; 2 The platform can runtime power off the ODD through ACPI; 3 The ODD is either slot type or drawer type. For such ODDs, zpodd_init is called and a new structure is allocated for it to store ZPODD related stuffs. And the zpodd_dev_enabled function is used to test if ZPODD is currently enabled for this ODD. A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [libata] Makefile: Fix build error in sata_highbankMark Langsdorf2012-10-011-1/+1
| | | | | | | Allow sata_highbank to build even if no other users of libahci.o are built. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ata: add platform driver for Calxeda AHCI controllerMark Langsdorf2012-09-131-0/+1
| | | | | | | | | | | | | | Calxeda highbank SATA phy has intermittent problems bringing up a link with Gen3 drives. Retrying the phy hard reset can work-around this issue, but each reset also disables spread spectrum support. The reset function also needs to reprogram the phy to enable spread spectrum support. Create a new driver based on ahci_platform to support the Calxeda Highbank SATA controller. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* PATA host controller driver for ep93xxRafal Prylowski2012-05-221-0/+1
| | | | | | | | | | | | Add PATA host controller driver for ep93xx. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Cc: Joao Ramos <joao.ramos@inov.pt> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: remove no longer needed pata_qdi driverBartlomiej Zolnierkiewicz2011-10-141-1/+0
| | | | | | | | | | | | QDI65x0 controllers are fully supported by pata_legacy driver so remove no longer needed pata_qdi driver. Leave PATA_QDI config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_qdi driver. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ata: Add iMX pata supportArnaud Patard (Rtp)2011-08-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add basic support for pata on iMX. It has been tested only on imx51. SDMA support will probably be added later so this version supports only PIO. v2: - enable only when needed IORDY - use dev_get_drvdata v3: - add missing clk_put() calls - use platform_get_irq() - fix resume code to avoid disabling IORDY on resume v4: - Remove EXPERIMENTAL and switch to depends on ARCH_MXC - Use devm_kzalloc() - make clock a must-have - Use only 1 ioremap Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_arasan_cf: Adding support for arasan compact flash host controllerViresh Kumar2011-03-141-0/+1
| | | | | | | | | | | The Arasan CompactFlash Device Controller has three basic modes of operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card ATA using true IDE modes. Currently driver supports only True IDE mode. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [libata] new driver acard_ahci, for ATP8620 host controllerDavid Milburn2011-01-051-0/+1
| | | | | | | | | Add support for Acard ATP8620 host controller. Based upon initial version by Jeff Garzik. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_mpc52xx: driver needs BMDMAWolfram Sang2010-12-241-1/+1
| | | | | | | | | | | | | | Found by this build-error if BMDMA is disabled: drivers/ata/pata_mpc52xx.c: In function 'mpc52xx_ata_init_one': drivers/ata/pata_mpc52xx.c:662: error: 'ata_bmdma_interrupt' undeclared (first use in this function) ... Move the Kconfig entry to the proper location as needed since 9a7780c9acb821fe1c2b6fc53f74cc2556ff5364 (libata-sff: make BMDMA optional) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Drivers: ata: Makefile: replace the use of <module>-objs with <module>-yTracey Dent2010-10-211-1/+1
| | | | | | | Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [libata] Add ATA transport classGwendal Grignou2010-10-211-1/+1
| | | | | | | | | | | | This is a scheleton for libata transport class. All information is read only, exporting information from libata: - ata_port class: one per ATA port - ata_link class: one per ATA port or 15 for SATA Port Multiplier - ata_device class: up to 2 for PATA link, usually one for SATA. Signed-off-by: Gwendal Grignou <gwendal@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: remove no longer needed pata_winbond driverBartlomiej Zolnierkiewicz2010-08-251-1/+0
| | | | | | | | | | | | Winbond W83759A controller is fully supported by pata_legacy driver so remove no longer needed pata_winbond driver. Leave PATA_WINBOND_VLB config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_winbond driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge branches 'master' and 'devel' into for-linusRussell King2010-08-101-0/+2
|\ | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
| * [ARM] pata_pxa: DMA-capable PATA driverMarek Vasut2010-06-181-0/+2
| | | | | | | | | | | | | | | | | | | | This patch adds a driver for a harddrive attached to PXA address and data bus. Unlike pata_platform, this driver allows usage of PXA DMA controller, making the transmission speed 3x higher. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* | [libata] Add Samsung PATA controller driver, pata_samsung_cfAbhilash Kesavan2010-08-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Adds support for the Samsung PATA controller. This driver is based on the Libata subsystem and references the earlier patches sent for IDE subsystem. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | [libata] Add 460EX on-chip SATA driver, sata_dwc_460exRupjyoti Sarmah2010-08-011-0/+1
|/ | | | | | | | | | This patch enables the on-chip DWC SATA controller of the AppliedMicro processor 460EX. Signed-off-by: Rupjyoti Sarmah <rsarmah@appliedmicro.com> Signed-off-by: Mark Miesfeld <mmiesfeld@appliedmicro.com> Signed-off-by: Prodyut Hazarika <phazarika@appliedmicro.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata-sff: make BMDMA optionalTejun Heo2010-05-251-37/+46
| | | | | | | | | | | | | | | | | | | | | Make BMDMA optional depending on new config variable CONFIG_ATA_BMDMA. In Kconfig, drivers are grouped into five groups - non-SFF native, SFF w/ custom DMA interface, SFF w/ BMDMA, PIO-only SFF, and generic fallback / legacy ones. Kconfig and Makefile are reorganized according to the groups and ordered alphabetically inside each group. ata_ioports.bmdma_addr and ata_port.bmdma_prd[_dma] are put into CONFIG_ATA_BMDMA, as are all bmdma related ops, variables and functions. This increase the binary size slightly when BMDMA is enabled but on both native-only and PIO-only configurations the size is slightly reduced. Either way, the size difference is insignificant. This change is more meaningful to signify the separation between SFF and BMDMA and as a tool to verify the separation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: Add platform driverAnton Vorontsov2010-05-141-0/+1
| | | | | | | | This can be used for AHCI-compatible interfaces implemented inside System-On-Chip solutions, or AHCI devices connected via localbus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: Move generic code into libahciAnton Vorontsov2010-05-141-1/+1
| | | | | | | | This patch should contain no functional changes, just moves code around. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge commit 'origin/master' into nextBenjamin Herrenschmidt2009-12-091-0/+1
|\ | | | | | | | | Conflicts: include/linux/kvm.h
| * pata_piccolo: Driver for old Toshiba chipsetsAlan Cox2009-12-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | libata/drivers: Add driver for Apple "MacIO" IDE controllerBenjamin Herrenschmidt2009-12-091-0/+1
|/ | | | | | | | | | | | | | | This is a libata driver for the "macio" IDE controller used on most Apple PowerMac and PowerBooks. It's a libata equivalent of drivers/ide/ppc/pmac.c It supports all the features of its predecessor, including mediabay hotplug and suspend/resume. It should also support module load/unload. The timing calculations have been simplified to use pre-calculated tables compared to drivers/ide/pmac.c and it uses the new mediabay interface provided by a previous patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tejun Heo <tj@kernel.org>
* libata: Add pata_atp867x driver for Artop/Acard ATP867X controllersJohn(Jung-Ik) Lee2009-09-171-0/+1
| | | | | | | | | | | This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane <ericu@google.com>. Signed-off-by: John(Jung-Ik) Lee <jilee@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Reviewed-by: Gwendal Gringo <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [libata] Add pata_rdc driver for RDC ATA devicesAlan Cox2009-09-011-0/+1
| | | | | | | From: Alan Cox <alan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [libata] PATA driver for CF interface on AT91SAM9260 SoCSergey Matyukevich2009-06-231-0/+1
| | | | | | | | This patch provides PATA driver for CompactFlash interface in True IDE mode on AT91SAM9260 SoC. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [ARM] 5522/1: PalmLD: IDE supportMarek VaĊĦut2009-05-311-0/+1
| | | | | | | | Support for Palm LifeDrive's internal harddrive. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* libata: New driver for OCTEON SOC Compact Flash interface (v7).David Daney2009-01-161-0/+1
| | | | | | | | | | | | Cavium OCTEON processor support was recently merged, so now we have this CF driver for your consideration. Most OCTEON variants have *no* DMA or interrupt support on the CF interface so for these, only PIO is supported. Although if DMA is available, we do take advantage of it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: Add Intel SCH PATA driverAlek Du2008-05-061-0/+1
| | | | | | | | This patch adds Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L) PATA controller support. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [MIPS] ATA: Rename routerboard 500 to 532Ralf Baechle2008-04-291-1/+1
| | | | | | | | The platform is actually named routerboard 532 so let's call it this. This patch only rename files, Kconfig and C symbols; no functional changes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: make PMP support optionalTejun Heo2008-04-171-1/+2
| | | | | | | | | | Make PMP support optional by adding CONFIG_SATA_PMP and leaving out libata-pmp.c if it isn't set. PMP helpers return constant values if PMP support is not enabled and PMP declarations alias non-PMP counterparts. This makes the compiler to leave out PMP related part out and LLDs to use non-PMP counterparts automatically. Signed-off-by: Tejun Heo <htejun@gmail.com>
* libata: make SFF support optionalTejun Heo2008-04-171-2/+2
| | | | | | | | | | Now that SFF support is completely separated out from the core layer, it can be made optional. Add CONFIG_ATA_SFF and let SFF drivers depend on it. If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c and data structures for SFF support are disabled. This saves good number of bytes for small systems. Signed-off-by: Tejun Heo <htejun@gmail.com>
* [libata] Add support for the RB500 PATA CompactFlashFlorian Fainelli2008-03-101-0/+1
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'linux-2.6'Paul Mackerras2008-01-311-0/+1
|\
| * pata_ninja32: Cardbus ATA initial supportAlan Cox2008-01-231-0/+1
| | | | | | | | | | | | | | | | | | Lots of work needed to bring it up to scratch but it does work so you can now use the card. That makes it at least useful, especially as the other cardbus cards are usually INIC162x which aren't yet supported well. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | libata: pata_of_platform: OF-Platform PATA device driverAnton Vorontsov2008-01-151-0/+1
|/ | | | | | | | | | | This driver nicely wraps around pata_platform library functions, and provides OF platform bus bindings to the PATA devices. Also add || PPC to the PATA_PLATFORM's "depends on" Kconfig entry, needed for PA Semi Electra. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* drivers/ata: add support to Freescale 3.0Gbps SATA ControllerLi Yang2007-10-171-0/+1
| | | | | | | | | | This patch adds support for Freescale 3.0Gbps SATA Controller supporting Native Command Queueing(NCQ), device hotplug, and ATAPI. This controller can be found on MPC8315 and MPC8378. Signed-off-by: Ashish Kalra <ashish.kalra@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_cs5536: ATA driver for Geode companion chipMartin K. Petersen2007-10-151-0/+1
| | | | | | | | | | | | | This is a driver for the ATA controller on the Geode CS5536 companion chip. The PCI device ID for this device was previously claimed by pata_amd.c but the PIO timings were not correct. This driver also works around a bug in some BIOSes that handle unaligned access to the PCI config registers poorly. Finally, the driver allows fallback to using MSR registers for configuration on BIOSes that are truly broken. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_acpi: ACPI driver supportAlan Cox2007-10-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a cable there may be eighty wires or perhaps forty and we learn about its type In the world of ACPI So we call the GTM And we find the the timing rate And we look through it to see If eighty wire it must be Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines And the drivers last you see Picking up unknown pci ids and the code begins to work Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines [Full speed ahead, Mr Hacker, full speed ahead] Full speed over here sir! Checking Cable, checking cable Aye aye, 80 wire, Heaven heaven] If we use ACPI (ACPI) Every box (every box) has all we need (has all we need) Cable type (cable type) and mode timing (mode timing) In our ATA (in our ATA) subroutines (subroutines, ha ha) Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines Timing lives in ACPI routines ACPI routines, ACPI routines Timing lives in ACPI routines ACPI routes ACPI routines Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-pmp: implement Port Multiplier supportTejun Heo2007-10-121-1/+2
| | | | | | | | | | | | | | | | | | | | | Implement Port Multiplier support. To support PMP, a LLDD has to supply ops->pmp_read() and pmp_write(). If non-null, ->pmp_attach and ->pmp_detach are called on PMP attach and detach, respectively. ->pmp_read/write() can be called while the port is frozen, so they must be implemented by polling. This patch supplies several helpers to ease ->pmp_read/write() implementation. Also, irq_handler and error_handler must be PMP aware. Most of PMP aware EH can be done by calling ata_pmp_do_eh() with appropriate methods. PMP EH uses separate set of reset methods and this patch implements standard prereset, hardreset and postreset methods. This patch only implements PMP support. The next patch will integrate PMP into the reset of libata and thus enable PMP support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_ns87415: Initial cut at 87415/87560 IDE supportAlan Cox2007-10-121-0/+1
| | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> [plus SuperIO fixes by Kyle McMartin] [plus a cleanup from me] Signed-off-by: Jeff Garzik <jeff@garzik.org>
* AVR32 PATA driverKristoffer Nyborg Gregertsen2007-10-121-0/+1
| | | | | | | | | | | | | | | | | Updated and simplified driver. Use only register transfer timing for both data and register transfers. This gives poorer performance in PIO1 and 2, but should not be a problem in PIO3 and 4, correct me if I'm wrong :) The driver works very we'll but I still wonder about the interrupts. I have an interrupt line, that works nicely when POLLING flag is not set. The problem is the number of interrupts that eat away my CPU cycles. When using the POLLING flag there seem to be some interrupts that dosen't get cleared. Furthermore the device dosen't drive INTRQ high, it stays at 2.5 volts and generates a lot of interrupts due to ripple / noise. What to do? Signed-off-by: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata driver for bf548 on chip ATAPI controller.Sonic Zhang2007-10-121-0/+1
| | | | | | | | Fix all issues pointed out in Jeff's email. Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/Tejun Heo2007-05-111-1/+1
| | | | | | | | ACPI applies to both SATA and PATA. Drop the 'S' from the config variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2007-05-061-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits) [ARM] Add comments marking in-use ptrace numbers [ARM] Move syscall saving out of the way of utrace [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header [ARM] mm 10: allow memory type to be specified with ioremap [ARM] mm 9: add additional device memory types [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6 [ARM] iop: add missing parens in macro [ARM] mm 7: remove duplicated __ioremap() prototypes ARM: OMAP: fix OMAP1 mpuio suspend/resume oops ARM: OMAP: MPUIO wake updates ARM: OMAP: speed up gpio irq handling ARM: OMAP: plat-omap changes for 2430 SDP ARM: OMAP: gpio object shrinkage, cleanup ARM: OMAP: /sys/kernel/debug/omap_gpio ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon ARM: OMAP: Enable 24xx GPIO autoidling [ARM] 4318/2: DSM-G600 Board Support [ARM] 4227/1: minor head.S fixups [ARM] 4328/1: Move i.MX UART regs to driver ...
| * [ARM] Add support for ICSIDE interface on RiscPCRussell King2007-05-031-0/+1
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | pata_cmd640: CMD640 PCI supportAlan Cox2007-04-281-0/+1
|/ | | | | | | | Support for the PCI CMD640 (not VLB) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: PATA driver for CellebAkira Iguchi2007-02-211-0/+1
| | | | | | | | | | | | | | This is the patch for PATA controller of Celleb. This driver uses the managed iomap (devres). Because this driver needs special taskfile accesses, there is a copy of ata_std_softreset(). ata_dev_try_classify() is exported so that it can be used in this function. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: ACPI and _GTF supportKristen Carlson Accardi2007-02-161-1/+1
| | | | | | | | | | _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 14:33:38 +0000