summaryrefslogtreecommitdiffstats
path: root/drivers/bus
Commit message (Collapse)AuthorAgeFilesLines
* bus: arm-ccn: fix module unloading Error: Removing state 147 which has ↵Kim Phillips2017-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | instances left. Unregistering the driver before calling cpuhp_remove_multi_state() removes any remaining hotplug cpu instances so __cpuhp_remove_state_cpuslocked() doesn't emit this warning: [ 268.748362] Error: Removing state 147 which has instances left. [ 268.748373] ------------[ cut here ]------------ [ 268.748386] WARNING: CPU: 2 PID: 5476 at kernel/cpu.c:1734 __cpuhp_remove_state_cpuslocked+0x454/0x4f0 [ 268.748389] Modules linked in: arm_ccn(-) [last unloaded: arm_ccn] [ 268.748403] CPU: 2 PID: 5476 Comm: rmmod Tainted: G W 4.14.0-rc4+ #3 [ 268.748406] Hardware name: AMD Seattle/Seattle, BIOS 10:18:39 Dec 8 2016 [ 268.748410] task: ffff8001a18ca000 task.stack: ffff80019c120000 [ 268.748416] PC is at __cpuhp_remove_state_cpuslocked+0x454/0x4f0 [ 268.748421] LR is at __cpuhp_remove_state_cpuslocked+0x448/0x4f0 [ 268.748425] pc : [<ffff2000081729ec>] lr : [<ffff2000081729e0>] pstate: 60000145 [ 268.748427] sp : ffff80019c127d30 [ 268.748430] x29: ffff80019c127d30 x28: ffff8001a18ca000 [ 268.748437] x27: ffff20000c2cb000 x26: 1fffe4000042d490 [ 268.748443] x25: ffff20000216a480 x24: 0000000000000000 [ 268.748449] x23: ffff20000b08e000 x22: 0000000000000001 [ 268.748455] x21: 0000000000000093 x20: 00000000000016f8 [ 268.748460] x19: ffff20000c2cbb80 x18: 0000ffffb5fe7c58 [ 268.748466] x17: 00000000004402d0 x16: 1fffe40001864f01 [ 268.748472] x15: ffff20000c4bf8b0 x14: 0000000000000000 [ 268.748477] x13: 0000000000007032 x12: ffff20000829ae48 [ 268.748483] x11: ffff20000c4bf000 x10: 0000000000000004 [ 268.748488] x9 : 0000000000006fbc x8 : ffff20000c318a40 [ 268.748494] x7 : 0000000000000000 x6 : ffff040001864f02 [ 268.748500] x5 : 0000000000000000 x4 : 0000000000000000 [ 268.748505] x3 : 0000000000000007 x2 : dfff200000000000 [ 268.748510] x1 : 000000000000ad3d x0 : 00000000000001f0 [ 268.748516] Call trace: [ 268.748521] Exception stack(0xffff80019c127bf0 to 0xffff80019c127d30) [ 268.748526] 7be0: 00000000000001f0 000000000000ad3d [ 268.748531] 7c00: dfff200000000000 0000000000000007 0000000000000000 0000000000000000 [ 268.748535] 7c20: ffff040001864f02 0000000000000000 ffff20000c318a40 0000000000006fbc [ 268.748539] 7c40: 0000000000000004 ffff20000c4bf000 ffff20000829ae48 0000000000007032 [ 268.748544] 7c60: 0000000000000000 ffff20000c4bf8b0 1fffe40001864f01 00000000004402d0 [ 268.748548] 7c80: 0000ffffb5fe7c58 ffff20000c2cbb80 00000000000016f8 0000000000000093 [ 268.748553] 7ca0: 0000000000000001 ffff20000b08e000 0000000000000000 ffff20000216a480 [ 268.748557] 7cc0: 1fffe4000042d490 ffff20000c2cb000 ffff8001a18ca000 ffff80019c127d30 [ 268.748562] 7ce0: ffff2000081729e0 ffff80019c127d30 ffff2000081729ec 0000000060000145 [ 268.748566] 7d00: 00000000000001f0 0000000000000000 0001000000000000 0000000000000000 [ 268.748569] 7d20: ffff80019c127d30 ffff2000081729ec [ 268.748575] [<ffff2000081729ec>] __cpuhp_remove_state_cpuslocked+0x454/0x4f0 [ 268.748580] [<ffff200008172adc>] __cpuhp_remove_state+0x54/0x80 [ 268.748597] [<ffff20000215dd84>] arm_ccn_exit+0x2c/0x70 [arm_ccn] [ 268.748604] [<ffff20000834cfbc>] SyS_delete_module+0x5a4/0x708 [ 268.748607] Exception stack(0xffff80019c127ec0 to 0xffff80019c128000) [ 268.748612] 7ec0: 0000000019bb7258 0000000000000800 ba64d0fb3d26a800 00000000000000da [ 268.748616] 7ee0: 0000ffffb6144e28 0000ffffcd95b409 fefefefefefefeff 7f7f7f7f7f7f7f7f [ 268.748621] 7f00: 000000000000006a 1999999999999999 0000ffffb6179000 0000000000bbcc6d [ 268.748625] 7f20: 0000ffffb6176b98 0000ffffcd95c2d0 0000ffffb5fe7b58 0000ffffb6163000 [ 268.748630] 7f40: 0000ffffb60ad3e0 00000000004402d0 0000ffffb5fe7c58 0000000019bb71f0 [ 268.748634] 7f60: 0000ffffcd95c740 0000000000000000 0000000019bb71f0 0000000000416700 [ 268.748639] 7f80: 0000000000000000 00000000004402e8 0000000019bb6010 0000ffffcd95c748 [ 268.748643] 7fa0: 0000000000000000 0000ffffcd95c460 00000000004113a8 0000ffffcd95c460 [ 268.748648] 7fc0: 0000ffffb60ad3e8 0000000080000000 0000000019bb7258 000000000000006a [ 268.748652] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 268.748657] [<ffff200008084f9c>] __sys_trace_return+0x0/0x4 [ 268.748661] ---[ end trace a996d358dcaa7f9c ]--- Fixes: 8df038725ad5 ("bus/arm-ccn: Use cpu-hp's multi instance support instead custom list") Signed-off-by: Kim Phillips <kim.phillips@arm.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* bus: arm-cci: Fix use of smp_processor_id() in preemptible contextMarc Zyngier2017-12-041-2/+5
| | | | | | | | | | | | | | | The ARM CCI driver seem to be using smp_processor_id() in a preemptible context, which is likely to make a DEBUG_PREMPT kernel scream at boot time. Turn this into a get_cpu()/put_cpu() that extends over the CPU hotplug registration, making sure that we don't race against a CPU down operation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* bus: arm-ccn: Fix use of smp_processor_id() in preemptible contextMarc Zyngier2017-12-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting a DEBUG_PREEMPT enabled kernel on a CCN-based system results in the following splat: [...] arm-ccn e8000000.ccn: No access to interrupts, using timer. BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id+0x1c/0x28 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.13.0 #6111 Hardware name: AMD Seattle/Seattle, BIOS 17:08:23 Jun 26 2017 Call trace: [<ffff000008089e78>] dump_backtrace+0x0/0x278 [<ffff00000808a22c>] show_stack+0x24/0x30 [<ffff000008bc3bc4>] dump_stack+0x8c/0xb0 [<ffff00000852b534>] check_preemption_disabled+0xfc/0x100 [<ffff00000852b554>] debug_smp_processor_id+0x1c/0x28 [<ffff000008551bd8>] arm_ccn_probe+0x358/0x4f0 [...] as we use smp_processor_id() in the wrong context. Turn this into a get_cpu()/put_cpu() that extends over the CPU hotplug registration, making sure that we don't race against a CPU down operation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* bus: arm-ccn: Simplify codeChristophe JAILLET2017-12-041-4/+2
| | | | | | | | Use 'devm_kasprintf()' to simplify the code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* bus: arm-ccn: Check memory allocation failureChristophe JAILLET2017-12-041-0/+5
| | | | | | | | | | | Check memory allocation failures and return -ENOMEM in such cases This avoids a potential NULL pointer dereference. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* bus: arm-ccn: constify attribute_group structures.Arvind Yadav2017-12-041-4/+4
| | | | | | | | | | | | | | | | | attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9074 5592 416 15082 3aea drivers/bus/arm-ccn.o File size After adding 'const': text data bss dec hex filename 9327 5336 416 15079 3ae7 drivers/bus/arm-ccn.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2017-11-163-0/+384
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
| * bus: add driver for the Technologic Systems NBUSSebastien Bourdelin2017-11-073-0/+384
| | | | | | | | | | | | | | | | | | | | This driver implements a GPIOs bit-banged bus, called the NBUS by Technologic Systems. It is used to communicate with the peripherals in the FPGA on the TS-4600 SoM. Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | Merge tag 'armsoc-soc' of ↵Linus Torvalds2017-11-163-0/+591
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...
| * | bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding removeTony Lindgren2017-10-131-0/+25
| | | | | | | | | | | | | | | | | | | | | Looks like we're missing remove() that's needed if a driver instance rebound. Otherwise we will get "Unbalanced pm_runtime_enable!". Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | bus: ti-sysc: mark PM functions as __maybe_unusedArnd Bergmann2017-10-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new bus driver causes a harmless compile-time warning when CONFIG_PM is disabled: drivers/bus/ti-sysc.c:440:12: error: 'sysc_runtime_resume' defined but not used [-Werror=unused-function] static int sysc_runtime_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~ drivers/bus/ti-sysc.c:421:12: error: 'sysc_runtime_suspend' defined but not used [-Werror=unused-function] static int sysc_runtime_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~~ This marks the two unused functions as __maybe_unused to shut up that warning. Fixes: 0eecc636e5a2 ("bus: ti-sysc: Add minimal TI sysc interconnect target driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | bus: ti-sysc: Add minimal TI sysc interconnect target driverTony Lindgren2017-10-103-0/+566
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can handle the sysc interconnect target module in a generic way for many TI SoCs. Initially let's just enable runtime PM with autosuspend, and probe the children. This can already be used for idling interconnect target modules that don't have any device driver available for the child devices. For now, the "ti,hwmods" custom binding is still required. That will be eventually deprecated in later patches. And more features will be added, such as parsing for sysc capabilities so we can continue removing the legacy platform data. Cc: Benoît Cousson <bcousson@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Nishanth Menon <nm@ti.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'arm64-upstream' of ↵Linus Torvalds2017-11-151-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...
| * | arm-ccn: perf: Prevent module unload while PMU is in useSuzuki K Poulose2017-11-031-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | When the PMU driver is built as a module, the perf expects the pmu->module to be valid, so that the driver is prevented from being unloaded while it is in use. Fix the CCN pmu driver to fill in this field. Fixes: a33b0daab73a0 ("bus: ARM CCN PMU driver") Cc: Pawel Moll <pawel.moll@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-022-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | bus: mbus: fix window size calculation for 4GB windowsJan Luebbe2017-10-121-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | At least the Armada XP SoC supports 4GB on a single DRAM window. Because the size register values contain the actual size - 1, the MSB is set in that case. For example, the SDRAM window's control register's value is 0xffffffe1 for 4GB (bits 31 to 24 contain the size). The MBUS driver reads back each window's size from registers and calculates the actual size as (control_reg | ~DDR_SIZE_MASK) + 1, which overflows for 32 bit values, resulting in other miscalculations further on (a bad RAM window for the CESA crypto engine calculated by mvebu_mbus_setup_cpu_target_nooverlap() in my case). This patch changes the type in 'struct mbus_dram_window' from u32 to u64, which allows us to keep using the same register calculation code in most MBUS-using drivers (which calculate ->size - 1 again). Fixes: fddddb52a6c4 ("bus: introduce an Marvell EBU MBus driver") CC: stable@vger.kernel.org Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2017-09-104-22/+22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
| * Merge tag 'sunxi-drivers-for-4.14' of ↵Arnd Bergmann2017-08-211-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers Pull "Allwinner driver changes for 4.14" from Chen-Yu Tsai: Usual driver changes: - SUNXI_RSB bus driver enabled by default for ARM64 - Support for SRAM controller and SRAM C block on the A64 added * tag 'sunxi-drivers-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64
| | * bus: sunxi-rsb: Enable by default for ARM64Jagan Teki2017-08-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner's A64 SoC uses the "Reduced Serial Bus" to communicate with its companion PMIC. Since arm64 does not have separate defconfigs for each platform or processor family, enable this driver by default for ARM64 as well. Note that the Kconfig symbol already depends on ARCH_SUNXI. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [wens@csie.org: Refined commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
| * | bus: Convert to using %pOF instead of full_nameRob Herring2017-08-163-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | | Merge tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of ↵Arnd Bergmann2017-08-191-2/+7
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Pull "non-urgent fixes for omaps for v4.14" from Tony Lindgren: Non-urgent fixes for omaps for v4.14 merge window. These all can wait for the merge window as we have not seemed to hit any of these so far: - Fix error handling in omap_ocp2scp_probe affecting runtime PM error path - Drop broken RPM status update for omap_device - Two fixes for of_irq_get() usage that can return 0 * tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4+: PRM: fix of_irq_get() result checks ARM: OMAP3+: PRM: fix of_irq_get() result check ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe
| * | bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probeKishon Vijay Abraham I2017-07-121-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error handling code in omap_ocp2scp_probe fails to invoke pm_runtime_disable and fails to initialize return value in certain cases. Fix it here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | bus: uniphier-system-bus: set up registers when resumingMasahiro Yamada2017-08-041-0/+14
| |/ |/| | | | | | | | | | | When resuming, set up registers that have been lost in the sleep state. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2017-07-091-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "This is the main pull request for the drm, I think I've got one later driver pull for mediatek SoC driver, I'm undecided on if it needs to go to you yet. Otherwise summary below: Core drm: - Atomic add driver private objects - Deprecate preclose hook in modern drivers - MST bandwidth tracking - Use kvmalloc in more places - Add mode_valid hook for crtc/encoder/bridge - Reduce sync_file construction time - Documentation updates - New DRM synchronisation object support New drivers: - pl111 - pl111 CLCD display controller Panel: - Innolux P079ZCA panel driver - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels - panel-samsung-s6e3ha2: Add s6e3hf2 panel support i915: - SKL+ watermark fixes - G4x/G33 reset improvements - DP AUX backlight improvements - Buffer based GuC/host communication - New getparam for (sub)slice infomation - Cannonlake and Coffeelake initial patches - Execbuf optimisations radeon/amdgpu: - Lots of Vega10 bug fixes - Preliminary raven support - KIQ support for compute rings - MEC queue management rework - DCE6 Audio support - SR-IOV improvements - Better radeon/amdgpu selection support nouveau: - HDMI stereoscopic support - Display code rework for >= GM20x GPUs msm: - GEM rework for fine-grained locking - Per-process pagetable work - HDMI fixes for Snapdragon 820. vc4: - Remove 256MB CMA limit from vc4 - Add out-fence support - Add support for cygnus - Get/set tiling ioctls support - Add T-format tiling support for scanout zte: - add VGA support. etnaviv: - Thermal throttle support for newer GPUs - Restore userspace buffer cache performance - dma-buf sync fix stm: - add stm32f429 display support exynos: - Rework vblank handling - Fixup sw-trigger code sun4i: - V3s display engine support - HDMI support for older SoCs - Preliminary work on dual-pipeline SoCs. rcar-du: - VSP work imx-drm: - Remove counter load enable from PRE - Double read/write reduction flag support tegra: - Documentation for the host1x and drm driver. - Lots of staging ioctl fixes due to grate project work. omapdrm: - dma-buf fence support - TILER rotation fixes" * tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits) drm: Remove unused drm_file parameter to drm_syncobj_replace_fence() drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu. amdgpu: Set cik/si_support to 1 by default if radeon isn't built drm/amdgpu/gfx9: fix driver reload with KIQ drm/amdgpu/gfx8: fix driver reload with KIQ drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay drm/ttm: Fix use-after-free in ttm_bo_clean_mm drm/amd/amdgpu: move get memory type function from early init to sw init drm/amdgpu/cgs: always set reference clock in mode_info drm/amdgpu: fix vblank_time when displays are off drm/amd/powerplay: power value format change for Vega10 drm/amdgpu/gfx9: support the amdgpu.disable_cu option drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10 drm/amdgpu: Make amdgpu_cs_parser_init static (v2) drm/amdgpu/cs: fix a typo in a comment drm/amdgpu: Fix the exported always on CU bitmap drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup drm/amd/powerplay/cz: print message if smc message fails drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init ...
| * | bus: SIMPLE_PM_BUS does not depend on ARCH_RENESASRob Clark2017-06-171-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | In fact, it is needed for PCI to work on msm8996 (and probably other things). No idea why it was depending on renesas but that doesn't make any sense. So drop the dependency. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Arnd Bergmann <arnd@arndb.de>
* | Merge tag 'armsoc-drivers' of ↵Linus Torvalds2017-07-042-50/+73
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
| * | bus: brcmstb_gisb: update to support new revisionDoug Berger2017-05-131-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | The 7278 introduces a new version of this core. This commit adds support for that revision. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | bus: brcmstb_gisb: enable driver for ARM64 architectureDoug Berger2017-05-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM64 architecture can provide meaningful diagnostic output from the GISB arbiter solely from interrupts and notifiers without the need to hook the low level fault handlers. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | bus: brcmstb_gisb: remove low-level ARM hooksDoug Berger2017-05-131-30/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM architecture can provide meaningful diagnostic output from the GISB arbiter solely from interrupts and notifiers without the need to hook the low level fault handlers. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | bus: brcmstb_gisb: add notifier handlingDoug Berger2017-05-131-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for GISB arbitration errors through a chained notifier when a process dies or a kernel panic occurs. This allows a meaningful GISB diagnostic message to occur along with other diagnostic information from the event. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | bus: brcmstb_gisb: correct support for 64-bit address outputDoug Berger2017-05-131-16/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GISB bus can support addresses beyond 32-bits. So this commit corrects support for reading a captured 64-bit address into a 64-bit variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR register (when present) and then outputting the full 64-bit value. It also removes unused definitions. Fixes: 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | bus: brcmstb_gisb: Use register offsets with writes tooDoug Berger2017-05-131-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | This commit corrects the bug introduced in commit f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") such that gisb_write() translates the register enumeration into an offset from the base address for writes as well as reads. Fixes: f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* | bus: arm-ccn: Enable stats for CCN-502 interconnectVelibor Markovski2017-06-231-0/+1
| | | | | | | | | | | | | | | | | | Add compatible string for the ARM CCN-502 interconnect Signed-off-by: Velibor Markovski <velibor.markovski@broadcom.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | bus: arm-ccn: Use devm_kcalloc() in arm_ccn_probe()Markus Elfring2017-06-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "devm_kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* | bus: arm-ccn: Fix module autoloadJavier Martinez Canillas2017-06-231-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/bus/arm-ccn.ko | grep alias $ After this patch: $ modinfo drivers/bus/arm-ccn.ko | grep alias alias: of:N*T*Carm,ccn-504C* alias: of:N*T*Carm,ccn-504 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2017-02-231-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ...
| * bus: qcom_ebi2: default y if ARCH_QCOMLinus Walleij2017-01-161-0/+1
| | | | | | | | | | | | | | | | | | | | Since we want this external bus to be available on multi_v7 builds, set to default ARCH_QCOM so we get it selected whenever QCOM is enabled. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* | bus: da850-mstpri: fix my e-mail addressBartosz Golaszewski2017-01-021-1/+1
|/ | | | | | | I noticed my e-mail address is wrong in this one. This patch fixes it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* cpu/hotplug: Cleanup state namesThomas Gleixner2016-12-252-2/+2
| | | | | | | | | | | | | | | | | When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* bus: arm-ccn: Prevent hotplug callback leakThomas Gleixner2016-12-251-1/+4
| | | | | | | | | | | | | | | | In case the driver registration fails, the hotplug callback is leaked. Not fatal, because it's never invoked as there are no instances registered, but wrong nevertheless. Fixes: fdc15a36d84e ("bus/arm-ccn: Convert to hotplug statemachine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2016-12-154-0/+570
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
| * Merge tag 'davinci-for-v4.10/drivers-2' of ↵Arnd Bergmann2016-11-301-3/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers Pull "DaVinci driver updates for v4.10 (part 2)" from Sekhar Nori: Fixes for drivers already queued to prevent section mismatch warnings introduced by them. * tag 'davinci-for-v4.10/drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
| | * bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()Bartosz Golaszewski2016-11-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to avoid a section mismatch drop the call to of_flat_dt_get_machine_name() when printing the error message. While we're at it: fix a typo. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
| * | Merge tag 'tegra-for-4.10-bus' of ↵Olof Johansson2016-11-183-0/+292
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers bus: Add Tegra GMI support This provides a driver to enable the use of the Generic Memory Interface found on Tegra SoCs that can host various types of high-speed devices. * tag 'tegra-for-4.10-bus' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: bus: Add support for Tegra Generic Memory Interface dt/bindings: Add bindings for Tegra GMI controller Signed-off-by: Olof Johansson <olof@lixom.net>
| | * bus: Add support for Tegra Generic Memory InterfaceMirza Krak2016-11-153-0/+292
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Generic Memory Interface bus can be used to connect high-speed devices such as NOR flash, FPGAs, DSPs... Signed-off-by: Mirza Krak <mirza.krak@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board Acked-by: Jon Hunter <jonathanh@nvidia.com> [treding@nvidia.com: symmetry and coding style OCD] Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | bus: davinci: add support for da8xx bus master priority controlBartosz Golaszewski2016-11-143-0/+280
| |/ | | | | | | | | | | | | | | | | | | | | | | Create the driver for the da8xx master peripheral priority configuration and implement support for writing to the three Master Priority registers on da850 SoCs. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [nsekhar@ti.com: subject line adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* | Merge tag 'armsoc-soc' of ↵Linus Torvalds2016-12-151-0/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - Added support for the TI DRA71x family of SoCs in mach-omap2, this is an new variant of the the DRA72x/DRA74x automotive infotainment chips we already supported for a while. - Added support for the ST STM32F746 SoC, the first Cortex-M7 based microcontroller we support, related to the smaller STM32F4 family. - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see http://elinux.org/RZ-G - SMP is now supported on the OX820 platform - A lot of code in mach-omap2 gets removed as a follow-up to removing support for board files in the previous release - Davinci has some new work to improve USB support - For i.MX, the performance monitor now supports profiling the memory controller using 'perf'" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits) ARM: davinci: da830-evm: use gpio descriptor for mmc pins ARM: davinci: da850-evm: use gpio descriptor for mmc pins ARM: davinci: hawk: use gpio descriptor for mmc pins ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6 ARM: davinci: da8xx: Fix ohci device name ARM: oxnas: Add OX820 config and makefile entry ARM: oxnas: Add OX820 SMP support ARM: davinci: PM: fix build when da850 not compiled in ARM: orion5x: remove legacy support of ls-chl ARM: integrator: drop EBI access use syscon ARM: BCM5301X: Add back handler ignoring external imprecise aborts ARM: davinci: PM: support da8xx DT platforms ARM: davinci: PM: cleanup: remove references to pdata ARM: davinci: PM: rework init, remove platform device ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: mach-stm32: Add a new SOC - STM32F746 ARM: shmobile: document SK-RZG1E board ARM: shmobile: r8a7745: basic SoC support ARM: imx: mach-imx6ul: add imx6ull support ARM: zynq: Reserve correct amount of non-DMA RAM ...
| * | drivers: cci: add missing CCI port availability firmware checkLorenzo Pieralisi2016-10-171-0/+10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CCI ports programming interface is available to the kernel only when booted in secure mode (or when firmware enables non-secure access to override CCI ports control). In both cases, firmware reports the CCI ports availability through the device tree CCI ports nodes, which must be parsed and their status checked by the kernel probing path. This check is currently missing and may cause the kernel to erroneously believe it is free to take control of CCI ports where in practice CCI ports control is forbidden. Add the missing CCI port availability check to the CCI driver in order to guarantee sane CCI usage. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
* | bus: vexpress-config: fix device reference leakJohan Hovold2016-11-301-1/+6
| | | | | | | | | | | | | | | | | | | | Make sure to drop the reference to the parent device taken by class_find_device() after populating the bus. Fixes: 3b9334ac835b ("mfd: vexpress: Convert custom func API to regmap") Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TESTLinus Walleij2016-10-171-0/+1
|/ | | | | | | | | | | This hides the option for people who do not want their Kconfig vision cluttered (i.e. x86) and enables compile testing apart from the supported main arch. Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 18:31:31 +0000