summaryrefslogtreecommitdiffstats
path: root/drivers/char
Commit message (Collapse)AuthorAgeFilesLines
* hwrng: stm32 - rename readl return valueTomas Marek2022-11-181-3/+3
| | | | | | | | | Use a more meaningful name for the readl return value variable. Link: https://lore.kernel.org/all/Y1J3QwynPFIlfrIv@loth.rohan.me.apana.org.au/ Signed-off-by: Tomas Marek <tomas.marek@elrest.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* hwrng: core - treat default_quality as a maximum and default to 1024Jason A. Donenfeld2022-11-188-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most hw_random devices return entropy which is assumed to be of full quality, but driver authors don't bother setting the quality knob. Some hw_random devices return less than full quality entropy, and then driver authors set the quality knob. Therefore, the entropy crediting should be opt-out rather than opt-in per-driver, to reflect the actual reality on the ground. For example, the two Raspberry Pi RNG drivers produce full entropy randomness, and both EDK2 and U-Boot's drivers for these treat them as such. The result is that EFI then uses these numbers and passes the to Linux, and Linux credits them as boot, thereby initializing the RNG. Yet, in Linux, the quality knob was never set to anything, and so on the chance that Linux is booted without EFI, nothing is ever credited. That's annoying. The same pattern appears to repeat itself throughout various drivers. In fact, very very few drivers have bothered setting quality=1024. Looking at the git history of existing drivers and corresponding mailing list discussion, this conclusion tracks. There's been a decent amount of discussion about drivers that set quality < 1024 -- somebody read and interepreted a datasheet, or made some back of the envelope calculation somehow. But there's been very little, if any, discussion about most drivers where the quality is just set to 1024 or unset (or set to 1000 when the authors misunderstood the API and assumed it was base-10 rather than base-2); in both cases the intent was fairly clear of, "this is a hardware random device; it's fine." So let's invert this logic. A hw_random struct's quality knob now controls the maximum quality a driver can produce, or 0 to specify 1024. Then, the module-wide switch called "default_quality" is changed to represent the maximum quality of any driver. By default it's 1024, and the quality of any particular driver is then given by: min(default_quality, rng->quality ?: 1024); This way, the user can still turn this off for weird reasons (and we can replace whatever driver-specific disabling hacks existed in the past), yet we get proper crediting for relevant RNGs. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* hwrng: stm32 - fix read of the last wordTomas Marek2022-10-211-1/+1
| | | | | | | | | | | | | | The stm32_rng_read() function samples TRNG by 4 bytes until at least 5 bytes are free in the input buffer. The last four bytes are never read. For example, 60 bytes are returned in case the input buffer size is 64 bytes. Read until at least 4 bytes are free in the input buffer. Fill the buffer entirely in case the buffer size is divisible by 4. Cc: Oleg Karfich <oleg.karfich@wago.com> Signed-off-by: Tomas Marek <tomas.marek@elrest.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* hwrng: stm32 - fix number of returned bytes on readTomas Marek2022-10-211-2/+4
| | | | | | | | | | | | | | | | | | | The stm32_rng_read() function uses `retval` variable as a counter of generated random bytes. However, the same variable is used to store a result of the polling function in case the driver is waiting until the TRNG is ready. The TRNG generates random numbers by 16B. One loop read 4B. So, the function calls the polling every 16B, i.e. every 4th loop. The `retval` counter is reset on poll call and only number of bytes read after the last poll call is returned to the caller. The remaining sampled random bytes (for example 48 out of 64 in case 64 bytes are read) are not used. Use different variable to store the polling function result and do not overwrite `retval` counter. Cc: Oleg Karfich <oleg.karfich@wago.com> Signed-off-by: Tomas Marek <tomas.marek@elrest.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* hwrng: mtk - add mt7986 supportMingming.Su2022-10-211-2/+3
| | | | | | | | | 1. Add trng compatible name for MT7986 2. Fix mtk_rng_wait_ready() function Signed-off-by: Mingming.Su <Mingming.Su@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* hwrng: npcm - Add NPCM8XX supportTomer Maimon2022-10-211-4/+10
| | | | | | | | | | | | Adding RNG NPCM8XX support to NPCM RNG driver. RNG NPCM8XX uses a different clock prescaler. As part of adding NPCM8XX support: - Add NPCM8XX specific compatible string. - Add data to handle architecture specific clock prescaler. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* prandom: remove unused functionsJason A. Donenfeld2022-10-111-6/+5
| | | | | | | | | | | | With no callers left of prandom_u32() and prandom_bytes(), as well as get_random_int(), remove these deprecated wrappers, in favor of get_random_u32() and get_random_bytes(). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* Merge tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds2022-10-117-33/+38
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull IPMI updates from Corey Minyard: "Fix a bunch of little problems in IPMI This is mostly just doc, config, and little tweaks. Nothing big, which is why there was nothing for 6.0. There is one crash fix, but it's not something that I think anyone is using yet" * tag 'for-linus-6.1-1' of https://github.com/cminyard/linux-ipmi: ipmi: Remove unused struct watcher_entry ipmi: kcs: aspeed: Update port address comments ipmi: Add __init/__exit annotations to module init/exit funcs ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failure ipmi:ipmb: Fix a vague comment and a typo dt-binding: ipmi: add fallback to npcm845 compatible ipmi: Fix comment typo char: ipmi: modify NPCM KCS configuration dt-bindings: ipmi: Add npcm845 compatible
| * ipmi: Remove unused struct watcher_entryYuan Can2022-09-281-6/+0
| | | | | | | | | | | | | | | | | | After commit e86ee2d44b44("ipmi: Rework locking and shutdown for hot remove"), no one use struct watcher_entry, so remove it. Signed-off-by: Yuan Can <yuancan@huawei.com> Message-Id: <20220927133814.98929-1-yuancan@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
| * ipmi: kcs: aspeed: Update port address commentsChia-Wei Wang2022-09-221-11/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove AST_usrGuide_KCS.pdf as it is no longer maintained. Add more descriptions as the driver now supports the I/O address configurations for both the KCS Data and Cmd/Status interface registers. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Message-Id: <20220920020333.601-1-chiawei_wang@aspeedtech.com> [I don't like removing documentation, but the document in question was a personal note by an employee and nothing official and not necessarily guaranteed to be accurate in the future. So go ahead and remove it.] Signed-off-by: Corey Minyard <cminyard@mvista.com>
| * ipmi: Add __init/__exit annotations to module init/exit funcsXiu Jianfeng2022-09-223-6/+6
| | | | | | | | | | | | | | | | Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Message-Id: <20220922111924.36044-1-xiujianfeng@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
| * ipmi:ipmb: Don't call ipmi_unregister_smi() on a register failureCorey Minyard2022-09-091-4/+8
| | | | | | | | | | | | | | The data structure won't be set up to be unregistered, and it can result in crashes if the register fails. Signed-off-by: Corey Minyard <minyard@acm.org>
| * ipmi:ipmb: Fix a vague comment and a typoCorey Minyard2022-09-041-2/+2
| | | | | | | | | | | | | | | | | | Sending an IPMI response message gets a reponse to the response, but the comment saying that just said "response response", which is hard to understand. Also fix an obvious typo. Reported-by: Shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
| * ipmi: Fix comment typoJason Wang2022-07-181-1/+1
| | | | | | | | | | | | | | | | The double `the' is duplicated in line 4360, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Message-Id: <20220715054156.6342-1-wangborong@cdjrlc.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
| * char: ipmi: modify NPCM KCS configurationTomer Maimon2022-07-181-3/+3
| | | | | | | | | | | | | | | | Modify NPCM IPMI KCS configuration to support all NPCM BMC SoC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Message-Id: <20220717121124.154734-3-tmaimon77@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
* | Merge tag 'tpmdd-next-v6.1-rc1' of ↵Linus Torvalds2022-10-101-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: "Just a few bug fixes this time" * tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle security/keys: Remove inconsistent __user annotation char: move from strlcpy with unused retval to strscpy
| * | char: move from strlcpy with unused retval to strscpyWolfram Sang2022-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
* | | Merge tag 'v6.1-p1' of ↵Linus Torvalds2022-10-103-69/+41
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
| * | | hwrng: core - start hwrng kthread also for untrusted sourcesDominik Brodowski2022-09-301-26/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Start the hwrng kthread even if the hwrng source has a quality setting of zero. Then, every crng reseed interval, one batch of data from this zero-quality hwrng source will be mixed into the CRNG pool. This patch is based on the assumption that data from a hwrng source will not actively harm the CRNG state. Instead, many hwrng sources (such as TPM devices), even though they are assigend a quality level of zero, actually provide some entropy, which is good enough to mix into the CRNG pool every once in a while. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear()Kshitiz Varshney2022-09-021-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: While servicing interrupt, if the IRQ happens to be because of a SEED_DONE due to a previous boot stage, you end up completing the completion prematurely, hence causing kernel to crash while booting. Fix: Moving IRQ handler registering after imx_rngc_irq_mask_clear() Fixes: 1d5449445bd0 (hwrng: mx-rngc - add a driver for Freescale RNGC) Signed-off-by: Kshitiz Varshney <kshitiz.varshney@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | hwrng: imx-rngc - use devres for hwrng registrationMartin Kaiser2022-08-261-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace hwrng_register with devm_hwrng_register and let devres unregister our hwrng when the device is removed. It's possible to do this now that devres also handles clock disable+uprepare. When we had to disable+unprepare the clock ourselves, we had to unregister the hwrng before this and couldn't use devres. There's nothing left to do for imx_rngc_remove, this function can go. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | hwrng: imx-rngc - use devm_clk_get_enabledMartin Kaiser2022-08-261-19/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new devm_clk_get_enabled function to get our clock. We don't have to disable and unprepare the clock ourselves any more in error paths and in the remove function. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | hwrng: imx-rngc - use KBUILD_MODNAME as driver nameMartin Kaiser2022-08-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use KBUILD_MODNAME instead of hard coding the driver name. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | hwrng: arm-smccc-trng - fix NO_ENTROPY handlingJames Cowgill2022-08-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SMCCC_RET_TRNG_NO_ENTROPY switch arm is never used because the NO_ENTROPY return value is negative and negative values are handled above the switch by immediately returning. Fix by handling errors using a default arm in the switch. Fixes: 0888d04b47a1 ("hwrng: Add Arm SMCCC TRNG based driver") Signed-off-by: James Cowgill <james.cowgill@blaize.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | hwrng: core - let sleep be interrupted when unregistering hwrngJason A. Donenfeld2022-08-191-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two deadlock scenarios that need addressing, which cause problems when the computer goes to sleep, the interface is set down, and hwrng_unregister() is called. When the deadlock is hit, sleep is delayed for tens of seconds, causing it to fail. These scenarios are: 1) The hwrng kthread can't be stopped while it's sleeping, because it uses msleep_interruptible() which does not react to kthread_stop. 2) A normal user thread can't be interrupted by hwrng_unregister() while it's sleeping, because hwrng_unregister() is called from elsewhere. We solve both issues by add a completion object called dying that fulfils waiters once we have started the process in hwrng_unregister. At the same time, we should cleanup a common and useless dmesg splat in the same area. Cc: <stable@vger.kernel.org> Reported-by: Gregory Erwin <gregerwin256@gmail.com> Fixes: fcd09c90c3c5 ("ath9k: use hw_random API instead of directly dumping into random.c") Link: https://lore.kernel.org/all/CAO+Okf6ZJC5-nTE_EJUGQtd8JiCkiEHytGgDsFGTEjs0c00giw@mail.gmail.com/ Link: https://lore.kernel.org/lkml/CAO+Okf5k+C+SE6pMVfPf-d8MfVPVq4PO7EY8Hys_DVXtent3HA@mail.gmail.com/ Link: https://bugs.archlinux.org/task/75138 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds2022-10-102-60/+83
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Huawei reported that when they updated their kernel from 4.4 to something much newer, some userspace code they had broke, the culprit being the accidental removal of O_NONBLOCK from /dev/random way back in 5.6. It's been gone for over 2 years now and this is the first we've heard of it, but userspace breakage is userspace breakage, so O_NONBLOCK is now back. - Use randomness from hardware RNGs much more often during early boot, at the same interval that crng reseeds are done, from Dominik. - A semantic change in hardware RNG throttling, so that the hwrng framework can properly feed random.c with randomness from hardware RNGs that aren't specifically marked as creditable. A related patch coming to you via Herbert's hwrng tree depends on this one, not to compile, but just to function properly, so you may want to merge this PULL before that one. - A fix to clamp credited bits from the interrupts pool to the size of the pool sample. This is mainly just a theoretical fix, as it'd be pretty hard to exceed it in practice. - Oracle reported that InfiniBand TCP latency regressed by around 10-15% after a change a few cycles ago made at the request of the RT folks, in which we hoisted a somewhat rare operation (1 in 1024 times) out of the hard IRQ handler and into a workqueue, a pretty common and boring pattern. It turns out, though, that scheduling a worker from there has overhead of its own, whereas scheduling a timer on that same CPU for the next jiffy amortizes better and doesn't incur the same overhead. I also eliminated a cache miss by moving the work_struct (and subsequently, the timer_list) to below a critical cache line, so that the more critical members that are accessed on every hard IRQ aren't split between two cache lines. - The boot-time initialization of the RNG has been split into two approximate phases: what we can accomplish before timekeeping is possible and what we can accomplish after. This winds up being useful so that we can use RDRAND to seed the RNG before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in addition to other early uses of randomness. The effect is that systems with RDRAND (or a bootloader seed) will never see any warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And kfence benefits from getting a better seed of its own. - Small systems without much entropy sometimes wind up putting some truncated serial number read from flash into hostname, so contribute utsname changes to the RNG, without crediting. - Add smaller batches to serve requests for smaller integers, and make use of them when people ask for random numbers bounded by a given compile-time constant. This has positive effects all over the tree, most notably in networking and kfence. - The original jitter algorithm intended (I believe) to schedule the timer for the next jiffy, not the next-next jiffy, yet it used mod_timer(jiffies + 1), which will fire on the next-next jiffy, instead of what I believe was intended, mod_timer(jiffies), which will fire on the next jiffy. So fix that. - Fix a comment typo, from William. * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: clear new batches when bringing new CPUs online random: fix typos in get_random_bytes() comment random: schedule jitter credit for next jiffy, not in two jiffies prandom: make use of smaller types in prandom_u32_max random: add 8-bit and 16-bit batches utsname: contribute changes to RNG random: use init_utsname() instead of utsname() kfence: use better stack hash seed random: split initialization into early step and later step random: use expired timer rather than wq for mixing fast pool random: avoid reading two cache lines on irq randomness random: clamp credited irq bits to maximum mixed random: throttle hwrng writes if no entropy is credited random: use hwgenerator randomness more frequently at early boot random: restore O_NONBLOCK support
| * | | | random: clear new batches when bringing new CPUs onlineJason A. Donenfeld2022-10-061-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit that added the new get_random_{u8,u16}() functions neglected to update the code that clears the batches when bringing up a new CPU. It also forgot a few comments and helper defines, so add those in too. Fixes: 585cd5fe9f73 ("random: add 8-bit and 16-bit batches") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: fix typos in get_random_bytes() commentWilliam Zijl2022-10-011-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove extra whitespace and add a missing word to a sentence describing get_random_bytes(). Signed-off-by: William Zijl <postmaster@gusted.xyz> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: schedule jitter credit for next jiffy, not in two jiffiesJason A. Donenfeld2022-10-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Counterintuitively, mod_timer(..., jiffies + 1) will cause the timer to fire not in the next jiffy, but in two jiffies. The way to cause the timer to fire in the next jiffy is with mod_timer(..., jiffies). Doing so then lets us bump the upper bound back up again. Fixes: 50ee7529ec45 ("random: try to actively add entropy rather than passively wait for it") Fixes: 829d680e82a9 ("random: cap jitter samples per bit to factor of HZ") Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: add 8-bit and 16-bit batchesJason A. Donenfeld2022-09-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are numerous places in the kernel that would be sped up by having smaller batches. Currently those callsites do `get_random_u32() & 0xff` or similar. Since these are pretty spread out, and will require patches to multiple different trees, let's get ahead of the curve and lay the foundation for `get_random_u8()` and `get_random_u16()`, so that it's then possible to start submitting conversion patches leisurely. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: use init_utsname() instead of utsname()Jason A. Donenfeld2022-09-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than going through the current-> indirection for utsname, at this point in boot, init_utsname()==utsname(), so just use it directly that way. Additionally, init_utsname() appears to be available nearly always, so move it into random_init_early(). Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: split initialization into early step and later stepJason A. Donenfeld2022-09-291-20/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The full RNG initialization relies on some timestamps, made possible with initialization functions like time_init() and timekeeping_init(). However, these are only available rather late in initialization. Meanwhile, other things, such as memory allocator functions, make use of the RNG much earlier. So split RNG initialization into two phases. We can provide arch randomness very early on, and then later, after timekeeping and such are available, initialize the rest. This ensures that, for example, slabs are properly randomized if RDRAND is available. Without this, CONFIG_SLAB_FREELIST_RANDOM=y loses a degree of its security, because its random seed is potentially deterministic, since it hasn't yet incorporated RDRAND. It also makes it possible to use a better seed in kfence, which currently relies on only the cycle counter. Another positive consequence is that on systems with RDRAND, running with CONFIG_WARN_ALL_UNSEEDED_RANDOM=y results in no warnings at all. One subtle side effect of this change is that on systems with no RDRAND, RDTSC is now only queried by random_init() once, committing the moment of the function call, instead of multiple times as before. This is intentional, as the multiple RDTSCs in a loop before weren't accomplishing very much, with jitter being better provided by try_to_generate_entropy(). Plus, filling blocks with RDTSC is still being done in extract_entropy(), which is necessarily called before random bytes are served anyway. Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: use expired timer rather than wq for mixing fast poolJason A. Donenfeld2022-09-281-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the fast pool was dumped into the main pool periodically in the fast pool's hard IRQ handler. This worked fine and there weren't problems with it, until RT came around. Since RT converts spinlocks into sleeping locks, problems cropped up. Rather than switching to raw spinlocks, the RT developers preferred we make the transformation from originally doing: do_some_stuff() spin_lock() do_some_other_stuff() spin_unlock() to doing: do_some_stuff() queue_work_on(some_other_stuff_worker) This is an ordinary pattern done all over the kernel. However, Sherry noticed a 10% performance regression in qperf TCP over a 40gbps InfiniBand card. Quoting her message: > MT27500 Family [ConnectX-3] cards: > Infiniband device 'mlx4_0' port 1 status: > default gid: fe80:0000:0000:0000:0010:e000:0178:9eb1 > base lid: 0x6 > sm lid: 0x1 > state: 4: ACTIVE > phys state: 5: LinkUp > rate: 40 Gb/sec (4X QDR) > link_layer: InfiniBand > > Cards are configured with IP addresses on private subnet for IPoIB > performance testing. > Regression identified in this bug is in TCP latency in this stack as reported > by qperf tcp_lat metric: > > We have one system listen as a qperf server: > [root@yourQperfServer ~]# qperf > > Have the other system connect to qperf server as a client (in this > case, it’s X7 server with Mellanox card): > [root@yourQperfClient ~]# numactl -m0 -N0 qperf 20.20.20.101 -v -uu -ub --time 60 --wait_server 20 -oo msg_size:4K:1024K:*2 tcp_lat Rather than incur the scheduling latency from queue_work_on, we can instead switch to running on the next timer tick, on the same core. This also batches things a bit more -- once per jiffy -- which is okay now that mix_interrupt_randomness() can credit multiple bits at once. Reported-by: Sherry Yang <sherry.yang@oracle.com> Tested-by: Paul Webb <paul.x.webb@oracle.com> Cc: Sherry Yang <sherry.yang@oracle.com> Cc: Phillip Goerl <phillip.goerl@oracle.com> Cc: Jack Vogel <jack.vogel@oracle.com> Cc: Nicky Veitch <nicky.veitch@oracle.com> Cc: Colm Harrington <colm.harrington@oracle.com> Cc: Ramanan Govindarajan <ramanan.govindarajan@oracle.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Tejun Heo <tj@kernel.org> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: stable@vger.kernel.org Fixes: 58340f8e952b ("random: defer fast pool mixing to worker") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: avoid reading two cache lines on irq randomnessJason A. Donenfeld2022-09-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to avoid reading and dirtying two cache lines on every IRQ, move the work_struct to the bottom of the fast_pool struct. add_ interrupt_randomness() always touches .pool and .count, which are currently split, because .mix pushes everything down. Instead, move .mix to the bottom, so that .pool and .count are always in the first cache line, since .mix is only accessed when the pool is full. Fixes: 58340f8e952b ("random: defer fast pool mixing to worker") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: clamp credited irq bits to maximum mixedJason A. Donenfeld2022-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the most that's mixed into the pool is sizeof(long)*2, don't credit more than that many bytes of entropy. Fixes: e3e33fc2ea7f ("random: do not use input pool from hard IRQs") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: throttle hwrng writes if no entropy is creditedJason A. Donenfeld2022-09-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a hwrng source does not provide an entropy estimate, it currently does not contribute at all to the CRNG. In order to help fix this, in case add_hwgenerator_randomness() is called with the entropy parameter set to zero, go to sleep until one reseed interval has passed. While the hwrng thread currently only runs under conditions where this is non-zero, this change is not harmful and prepares for future updates to the hwrng core. Cc: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: use hwgenerator randomness more frequently at early bootDominik Brodowski2022-09-231-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mix in randomness from hw-rng sources more frequently during early boot, approximately once for every rng reseed. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
| * | | | random: restore O_NONBLOCK supportJason A. Donenfeld2022-09-232-2/+7
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to 5.6, when /dev/random was opened with O_NONBLOCK, it would return -EAGAIN if there was no entropy. When the pools were unified in 5.6, this was lost. The post 5.6 behavior of blocking until the pool is initialized, and ignoring O_NONBLOCK in the process, went unnoticed, with no reports about the regression received for two and a half years. However, eventually this indeed did break somebody's userspace. So we restore the old behavior, by returning -EAGAIN if the pool is not initialized. Unlike the old /dev/random, this can only occur during early boot, after which it never blocks again. In order to make this O_NONBLOCK behavior consistent with other expectations, also respect users reading with preadv2(RWF_NOWAIT) and similar. Fixes: 30c08efec888 ("random: make /dev/random be almost like /dev/urandom") Reported-by: Guozihua <guozihua@huawei.com> Reported-by: Zhongguohua <zhongguohua1@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Andrew Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* | | | Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds2022-10-071-1/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
| * | | | Merge 6.0-rc4 into tty-nextGreg Kroah-Hartman2022-09-051-0/+6
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: Make ->set_termios() old ktermios constIlpo Järvinen2022-08-301-1/+2
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'v6.0-rc5' into i2c/for-mergewindowWolfram Sang2022-09-161-0/+6
|\ \ \ \ | | |/ / | |/| | | | | | Linux 6.0-rc5
| * | | /dev/null: add IORING_OP_URING_CMD supportPaul Moore2022-08-261-0/+6
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the io_uring command pass through, aka IORING_OP_URING_CMD, to the /dev/null driver. As with all of the /dev/null functionality, the implementation is just a simple sink where commands go to die, but it should be useful for developers who need a simple IORING_OP_URING_CMD test device that doesn't require any special hardware. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paul Moore <paul@paul-moore.com>
* / / i2c: Make remove callback return voidUwe Kleine-König2022-08-169-26/+11
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* | Merge tag 's390-5.20-1' of ↵Linus Torvalds2022-08-061-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Rework copy_oldmem_page() callback to take an iov_iter. This includes a few prerequisite updates and fixes to the oldmem reading code. - Rework cpufeature implementation to allow for various CPU feature indications, which is not only limited to hardware capabilities, but also allows CPU facilities. - Use the cpufeature rework to autoload Ultravisor module when CPU facility 158 is available. - Add ELF note type for encrypted CPU state of a protected virtual CPU. The zgetdump tool from s390-tools package will decrypt the CPU state using a Customer Communication Key and overwrite respective notes to make the data accessible for crash and other debugging tools. - Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto test. - Fix incorrect recovery of kretprobe modified return address in stacktrace. - Switch the NMI handler to use generic irqentry_nmi_enter() and irqentry_nmi_exit() helper functions. - Rework the cryptographic Adjunct Processors (AP) pass-through design to support dynamic changes to the AP matrix of a running guest as well as to implement more of the AP architecture. - Minor boot code cleanups. - Grammar and typo fixes to hmcdrv and tape drivers. * tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) Revert "s390/smp: enforce lowcore protection on CPU restart" Revert "s390/smp: rework absolute lowcore access" Revert "s390/smp,ptdump: add absolute lowcore markers" s390/unwind: fix fgraph return address recovery s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit() s390: add ELF note type for encrypted CPU state of a PV VCPU s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/setup: rearrange absolute lowcore initialization s390/boot: cleanup adjust_to_uv_max() function s390/smp: enforce lowcore protection on CPU restart s390/tape: fix comment typo s390/hmcdrv: fix Kconfig "its" grammar s390/docs: fix warnings for vfio_ap driver doc s390/docs: fix warnings for vfio_ap driver lock usage doc s390/crash: support multi-segment iterators s390/crash: use static swap buffer for copy_to_user_real() s390/crash: move copy_to_user_real() to crash_dump.c s390/zcore: fix race when reading from hardware system area s390/crash: fix incorrect number of bytes to copy to user space ...
| * | s390/cpufeature: rework to allow more than only hwcap bitsHeiko Carstens2022-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework cpufeature implementation to allow for various cpu feature indications, which is not only limited to hwcap bits. This is achieved by adding a sequential list of cpu feature numbers, where each of them is mapped to an entry which indicates what this number is about. Each entry contains a type member, which indicates what feature name space to look into (e.g. hwcap, or cpu facility). If wanted this allows also to automatically load modules only in e.g. z/VM configurations. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Link: https://lore.kernel.org/r/20220713125644.16121-2-seiden@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
* | | Merge tag 'powerpc-6.0-1' of ↵Linus Torvalds2022-08-061-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add support for syscall stack randomization - Add support for atomic operations to the 32 & 64-bit BPF JIT - Full support for KASAN on 64-bit Book3E - Add a watchdog driver for the new PowerVM hypervisor watchdog - Add a number of new selftests for the Power10 PMU support - Add a driver for the PowerVM Platform KeyStore - Increase the NMI watchdog timeout during live partition migration, to avoid timeouts due to increased memory access latency - Add support for using the 'linux,pci-domain' device tree property for PCI domain assignment - Many other small features and fixes Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada, Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu Jianfeng, and Zhouyi Zhou. * tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits) powerpc/64e: Fix kexec build error EDAC/ppc_4xx: Include required of_irq header directly powerpc/pci: Fix PHB numbering when using opal-phbid powerpc/64: Init jump labels before parse_early_param() selftests/powerpc: Avoid GCC 12 uninitialised variable warning powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address powerpc/xive: Fix refcount leak in xive_get_max_prio powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader powerpc/perf: Include caps feature for power10 DD1 version powerpc: add support for syscall stack randomization powerpc: Move system_call_exception() to syscall.c powerpc/powernv: rename remaining rng powernv_ functions to pnv_ powerpc/powernv/kvm: Use darn for H_RANDOM on Power9 powerpc/powernv: Avoid crashing if rng is NULL selftests/powerpc: Fix matrix multiply assist test powerpc/signal: Update comment for clarity powerpc: make facility_unavailable_exception 64s powerpc/platforms/83xx/suspend: Remove write-only global variable powerpc/platforms/83xx/suspend: Prevent unloading the driver powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration ...
| * | | powerpc/powernv: rename remaining rng powernv_ functions to pnv_Jason A. Donenfeld2022-07-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The preferred nomenclature is pnv_, not powernv_, but rng.c used powernv_ for some reason, which isn't consistent with the rest. A recent commit added a few pnv_ functions to rng.c, making the file a bit of a mishmash. This commit just replaces the rest of them. Fixes: f3eac426657d ("powerpc/powernv: wire up rng during setup_arch") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> [mpe: Reorder after bug fix commits] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220727143219.2684192-3-mpe@ellerman.id.au
* | | | Merge tag 'iommu-updates-v5.20-or-v6.0' of ↵Linus Torvalds2022-08-061-10/+7
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - The most intrusive patch is small and changes the default allocation policy for DMA addresses. Before the change the allocator tried its best to find an address in the first 4GB. But that lead to performance problems when that space gets exhaused, and since most devices are capable of 64-bit DMA these days, we changed it to search in the full DMA-mask range from the beginning. This change has the potential to uncover bugs elsewhere, in the kernel or the hardware. There is a Kconfig option and a command line option to restore the old behavior, but none of them is enabled by default. - Add Robin Murphy as reviewer of IOMMU code and maintainer for the dma-iommu and iova code - Chaning IOVA magazine size from 1032 to 1024 bytes to save memory - Some core code cleanups and dead-code removal - Support for ACPI IORT RMR node - Support for multiple PCI domains in the AMD-Vi driver - ARM SMMU changes from Will Deacon: - Add even more Qualcomm device-tree compatible strings - Support dumping of IMP DEF Qualcomm registers on TLB sync timeout - Fix reference count leak on device tree node in Qualcomm driver - Intel VT-d driver updates from Lu Baolu: - Make intel-iommu.h private - Optimize the use of two locks - Extend the driver to support large-scale platforms - Cleanup some dead code - MediaTek IOMMU refactoring and support for TTBR up to 35bit - Basic support for Exynos SysMMU v7 - VirtIO IOMMU driver gets a map/unmap_pages() implementation - Other smaller cleanups and fixes * tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits) iommu/amd: Fix compile warning in init code iommu/amd: Add support for AVIC when SNP is enabled iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement ACPI/IORT: Fix build error implicit-function-declaration drivers: iommu: fix clang -wformat warning iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop iommu/arm-smmu-qcom: Add SM6375 SMMU compatible dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375 MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled iommu/amd: Set translation valid bit only when IO page tables are in use iommu/amd: Introduce function to check and enable SNP iommu/amd: Globally detect SNP support iommu/amd: Process all IVHDs before enabling IOMMU features iommu/amd: Introduce global variable for storing common EFR and EFR2 iommu/amd: Introduce Support for Extended Feature 2 Register iommu/amd: Change macro for IOMMU control register bit shift to decimal value iommu/exynos: Enable default VM instance on SysMMU v7 iommu/exynos: Add SysMMU v7 register set ...
| | \ \ \
| | \ \ \
| *-. \ \ \ Merge branches 'arm/exynos', 'arm/mediatek', 'arm/msm', 'arm/smmu', ↵Joerg Roedel2022-07-291-10/+7
| |\ \ \ \ \ | | | |_|/ / | | |/| | / | | |_|_|/ | |/| | | 'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 00:54:32 +0000