summaryrefslogtreecommitdiffstats
path: root/drivers/extcon
Commit message (Collapse)AuthorAgeFilesLines
* extcon: max8997: Add missing modalias stringMarek Szyprowski2021-07-201-0/+1
| | | | | | | | | | | | | [ Upstream commit dc11fc2991e9efbceef93912b83e333d2835fb19 ] The platform device driver name is "max8997-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: sm5502: Drop invalid register write in sm5502_reg_dataStephan Gerhold2021-07-201-1/+0
| | | | | | | | | | | | | | | | | [ Upstream commit d25b224f8e5507879b36a769a6d1324cf163466c ] When sm5502_init_dev_type() iterates over sm5502_reg_data to initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data). There is no need to add another empty element to sm5502_reg_data. Having the additional empty element in sm5502_reg_data will just result in writing 0xff to register 0x00, which does not really make sense. Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has ↵Hans de Goede2021-05-221-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | been unplugged [ Upstream commit c309a3e8793f7e01c4a4ec7960658380572cb576 ] When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: Fix error handling in extcon_dev_registerDinghao Liu2021-04-071-0/+1
| | | | | | | | | | | | [ Upstream commit d3bdd1c3140724967ca4136755538fa7c05c2b4e ] When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: max77693: Fix modalias stringMarek Szyprowski2020-12-291-1/+1
| | | | | | | | | | | | | [ Upstream commit e1efdb604f5c9903a5d92ef42244009d3c04880f ] The platform device driver name is "max77693-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'Christophe JAILLET2020-06-251-2/+1
| | | | | | | | | | | | | | | | | [ Upstream commit bc84cff2c92ae5ccb2c37da73756e7174b1b430f ] In some error handling paths, a call to 'iio_channel_get()' is not balanced by a corresponding call to 'iio_channel_release()'. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function. Fixes: 19939860dcae ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: sm5502: Reset registers during initializationStephan Gerhold2019-12-312-0/+6
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6942635032cfd3e003e980d2dfa4e6323a3ce145 ] On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader seems to keep interrupts enabled for SM5502 when booting Linux. Changing the cable state (i.e. plugging in a cable) - until the driver is loaded - will therefore produce an interrupt that is never read. In this situation, the cable state will be stuck forever on the initial state because SM5502 stops sending interrupts. This can be avoided by clearing those pending interrupts after the driver has been loaded. One way to do this is to reset all registers to default state by writing to SM5502_REG_RESET. This ensures that we start from a clean state, with all interrupts disabled. Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: max8997: Fix lack of path setting in USB device modeMarek Szyprowski2019-12-171-6/+4
| | | | | | | | | | | | | | | | | [ Upstream commit a2dc50914744eea9f83a70a5db0486be625e5dc0 ] MAX8997 driver disables automatic path selection from MicroUSB connector and manually sets path to either UART or USB lines. However the code for setting USB path worked only for USB host mode (when ID pin is set to ground). When standard USB cable (USB device mode) is connected, path registers are not touched. This means that once the non-USB accessory is connected to MAX8997-operated micro USB port, the path is no longer set to USB and USB device mode doesn't work. This patch fixes it by setting USB path both for USB and USB host modes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: cht-wc: Return from default case to avoid warningsAndy Shevchenko2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 962341b54b99965ebec5f70c8d39f1c382eea833 ] When we have first case to fall through it's not enough to put single comment there to satisfy compiler. Instead of doing that, return fall back value directly from default case. This to avoid following warnings: drivers/extcon/extcon-intel-cht-wc.c: In function ‘cht_wc_extcon_get_charger’: include/linux/device.h:1420:2: warning: this statement may fall through [-Wimplicit-fallthrough=] _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/extcon/extcon-intel-cht-wc.c:148:3: note: in expansion of macro ‘dev_warn’ dev_warn(ext->dev, ^~~~~~~~ drivers/extcon/extcon-intel-cht-wc.c:152:2: note: here case CHT_WC_USBSRC_TYPE_SDP: ^~~~ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: arizona: Disable mic detect if running when driver is removedCharles Keepax2019-05-311-0/+10
| | | | | | | | | | | | | | | | | | [ Upstream commit 00053de52231117ddc154042549f2256183ffb86 ] Microphone detection provides the button detection features on the Arizona CODECs as such it will be running if the jack is currently inserted. If the driver is unbound whilst the jack is still inserted this will cause warnings from the regulator framework as the MICVDD regulator is put but was never disabled. Correct this by disabling microphone detection on driver removal and if the microphone detection was running disable the regulator and put the runtime reference that was currently held. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* extcon: Release locking when sending the notification of connector stateChanwoo Choi2018-09-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | commit 8a9dbb779fe882325b9a0238494a7afaff2eb444 upstream. Previously, extcon used the spinlock before calling the notifier_call_chain to prevent the scheduled out of task and to prevent the notification delay. When spinlock is locked for sending the notification, deadlock issue occured on the side of extcon consumer device. To fix this issue, extcon consumer device should always use the work. it is always not reasonable to use work. To fix this issue on extcon consumer device, release locking when sending the notification of connector state. Fixes: ab11af049f88 ("extcon: Add the synchronization extcon APIs to support the notification") Cc: stable@vger.kernel.org Cc: Roger Quadros <rogerq@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* extcon: intel-cht-wc: Set direction and drv flags for V5 boost GPIOHans de Goede2018-04-241-4/+7
| | | | | | | | | | | | | | | | | | commit ad49aee401dd1997ec71360df6e51a91ad3cf516 upstream. Sometimes (firmware bug?) the V5 boost GPIO is not configured as output by the BIOS, leading to the 5V boost convertor being permanently on, Explicitly set the direction and drv flags rather then inheriting them from the firmware to fix this. Fixes: 585cb239f4de ("extcon: intel-cht-wc: Disable external 5v boost ...") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* extcon: int3496: process id-pin first so that we start with the right statusHans de Goede2018-02-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | commit 0434352d3d2e950cf5e743f6062abd87de22f960 upstream. Some other drivers may be waiting for our extcon to show-up, exiting their probe methods with -EPROBE_DEFER until we show up. These drivers will typically get the cable state directly after getting the extcon, this commit changes the int3496 code to wait for the initial processing of the id-pin to complete before exiting probe() with 0, which will cause devices waiting on the defered probe to get reprobed. This fixes a race where the initial work might still be running while other drivers were already calling extcon_get_state(). Fixes: 2f556bdb9f2e ("extcon: int3496: Add Intel INT3496 ACPI ... driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-022-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* extcon: max77693: Allow MHL attach notifierMaciej Purski2017-08-251-3/+2
| | | | | | | Without this patch extcon couldn't notify attaching MHL cable. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Correct description to improve the readabilityChanwoo Choi2017-08-162-166/+158
| | | | | | | | | | | | | | | The extcon files explains the detailed operation for functions and what is meaning of extcon structure. There are different explanation even if the same argument. So, it modifies the description for both functions and structures in order to improve the readability and guide the role of functions more well. Also, this patch fixes the mismatching license info as a GPL v2 and removes the inactive author information. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Remove unused CABLE_NAME_MAX definitionChanwoo Choi2017-08-161-1/+0
| | | | | | This patch removes the unused CABLE_NAME_MAX definition. Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
* extcon: cros-ec: Fix a potential NULL pointer dereferenceChristophe JAILLET2017-08-071-0/+2
| | | | | | | | | Return -ENOMEM in case of memory allocation failure. This avoids a NULL pointer dereference. Fixes: c69831666109 ("extcon: cros-ec: Add extcon-cros-ec driver to support display out") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Convert to using %pOF instead of full_nameRob Herring2017-07-191-2/+2
| | | | | | | | | Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* Merge remote-tracking branch 'origin/ib-extcon-mfd-4.14' into extcon-nextChanwoo Choi2017-07-173-0/+423
|\
| * extcon: cros-ec: Add extcon-cros-ec driver to support display outBenson Leung2017-07-173-0/+423
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the driver for the USB Type C cable detection mechanism built into the ChromeOS Embedded Controller on systems that have USB Type-C ports. At present, this allows for the presence of display out, but in future, it may also be used to notify host and device type cables and the presence of power. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Chanwoo Choi <cw00.chio@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | extcon: int3496: Constify acpi_device_idArvind Yadav2017-07-161-1/+1
|/ | | | | | | | | | | | | | | | | acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 1733 352 0 2085 825 drivers/extcon/extcon-intel-int3496.o File size After adding 'const': text data bss dec hex filename 1797 272 0 2069 815 drivers/extcon/extcon-intel-int3496.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Switch to devm_acpi_dev_add_driver_gpios()Andy Shevchenko2017-06-121-4/+1
| | | | | | | | Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assingment if ->probe() fails. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: qcom-spmi-misc: add dependency on ARCH_QCOMPeter Robinson2017-05-231-0/+1
| | | | | | | | Depend on the architecture the device actuall is in, also add dep on the compile test to ensure continued coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: arizona: Use devm_kcalloc() in arizona_extcon_get_micd_configs()Markus Elfring2017-05-231-3/+1
| | | | | | | | | | | | | | * A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Fix a typo in three comment linesMarkus Elfring2017-05-231-3/+3
| | | | | | | Adjust three words in this description for a function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Use devm_kcalloc() in extcon_dev_register()Markus Elfring2017-05-231-3/+2
| | | | | | | | | A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Use BIT() macro for the left-shift operationChanwoo Choi2017-04-061-1/+1
| | | | | | This patch just uses the BIT() macro to make the code simple. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exitHans de Goede2017-04-061-4/+11
| | | | | | | | | | | | | When we leave host-mode because the id-pin is no longer connected to ground, the 5v boost converter is normally still on, so we will see Vbus, but it is not from a charger (normally) so the charger-type detection will fail. This commit silences the cht_wc_extcon_get_charger() false-positive errors when we're leaving host mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: intel-cht-wc: Disable external 5v boost converter on probeHans de Goede2017-04-061-0/+35
| | | | | | | | | | | | | | | | | | | Disable the 5v boost converter on probe in case it was left on by the BIOS, this fixes 2 problems: 1) This gets seen by the external battery charger as a valid Vbus supply and it then tries to feed Vsys from this creating a feedback loop which causes aprox. 300 mA extra battery drain (and unless we drive the external-charger-disable pin high it also tries to charge the battery causing even more feedback). 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply Since the external battery charger has its own 5v boost converter which does not have these issues, we simply turn the separate external 5v boost converter off and leave it off entirely. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Remove porting compatibility of swich classChanwoo Choi2017-04-061-20/+0
| | | | | | | | This patch removes the porting compatibility for switch class because there is no any usage and requirement of swich class over a couple of years. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: intel-cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driverHans de Goede2017-04-063-0/+361
| | | | | | | | Add a driver for charger detection / control on the Intel Cherrytrail Whiskey Cove PMIC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: palmas: Don't miss GPIO events during suspend/resumeRoger Quadros2017-04-061-0/+6
| | | | | | | | The USB cable state can change during suspend/resume so be sure to check and update the extcon state. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: usb-gpio: Don't miss event during suspend/resumeRoger Quadros2017-04-061-3/+2
| | | | | | | | | | | We must check for ID/VBUS changes during resume irrespective of whether our device wakeup is enabled or not. Without this we seem to be missing ID/VBUS events after system suspend/resume. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: usb-gpio: Do not enable USB as wakeup source by defaultPeter Chen2017-04-061-1/+1
| | | | | | | | Whether the USB port as a wakeup source should be determined by user, but not enabled by default. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: arizona: Wait for any running HPDETs to complete on jack removalCharles Keepax2017-04-061-0/+46
| | | | | | | | | | As the HPDET can't be aborted mid way through we should not allow any new insertion to be processed until the previous HPDET has finished. It is very unlikely but with low enough debounce settings you could start a new HPDET before the old one has completed, which results in an erroneous reading. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* Merge branch 'ib-extcon-4.12' into HEADChanwoo Choi2017-04-063-0/+130
|\
| * extcon: Add new extcon_register_notifier_all() to monitor all external ↵Chanwoo Choi2017-04-043-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | connectors The extcon core already provides the extcon_register_notifier() function in order to register the notifier block which is used to monitor the state change for the specific external connector such as EXTCON_USB, EXTCON_USB_HOST and so on. The extcon consumer uses the this function. The extcon consumer might need to monitor the all supported external connectors from the extcon device. In this case, The extcon consumer should have each notifier_block structure for each external connector. This patch adds the new extcon_register_notifier_all() function that extcon consumer is able to monitor the state change of all supported external connectors by using only one notifier_block structure. - List of new added functions: int extcon_register_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int extcon_unregister_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int devm_extcon_register_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); void devm_extcon_unregister_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* | Revert "extcon: usb-gpio: add support for ACPI gpio interface"Andy Shevchenko2017-03-271-2/+1
|/ | | | | | | | | | | | The commit 942c7924a51e introduced a check for ACPI handle for the device that never appears on any ACPI-enabled platform so far. It seems a confusion with extcon-intel-int3496 which does support ACPI-enabled platforms. Revert commit 942c7924a51e to avoid any confusion in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Set the id pin to direction-input if necessaryHans de Goede2017-03-221-0/+3
| | | | | | | | | | | | | | | | | | | | With the new more strict ACPI gpio code the dsdt's IoRestriction flags are honored on gpiod_get, but in some dsdt's it is wrong, so explicitly call gpiod_direction_input on the id gpio if necessary. This fixes the following errors when the int3496 code is used together with the new more strict ACPI gpio code: [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22 [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Use gpiod_get instead of gpiod_get_indexHans de Goede2017-03-221-9/+3
| | | | | | | | | Now that we've an acpi mapping table we should be using gpiod_get instead of gpiod_get_index. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Add dependency on X86 as it's Intel specificPeter Robinson2017-03-221-1/+1
| | | | | | | | Add dependency on X86 so it doesn't show up on other arches and add a option for compile test so it still gets build coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Add GPIO ACPI mapping tableAndy Shevchenko2017-03-221-0/+20
| | | | | | | | | | | | In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Rename GPIO pins in accordance with bindingAndy Shevchenko2017-03-221-2/+2
| | | | | | | | Update GPIO pin names in extcon-intel-int3496.c driver to follow the existing extcon binding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Propagate error code of gpiod_to_irq()Andy Shevchenko2017-03-131-2/+2
| | | | | | | | gpiod_to_irq() doesn't return 0. Thus, we just adjust condition and replace -EINVAL by actual error code it returns. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* scripts/spelling.txt: add "swithc" pattern and fix typo instancesMasahiro Yamada2017-02-271-1/+1
| | | | | | | | | | | | | Fix typos and add the following to the scripts/spelling.txt: swithc||switch swithced||switched swithcing||switching Link: http://lkml.kernel.org/r/1481573103-11329-3-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* extcon: palmas: Use dev_dbg macro for the debug messagesRoger Quadros2017-01-251-8/+8
| | | | | | | | User is not interested in USB cable events appearing on the console. Use dev_dbg() instead of dev_info() for these events. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Modify the name of EXTCON_USB_HOST connectorChanwoo Choi2017-01-091-1/+1
| | | | | | | | This patch renames the EXTCON_USB_HOST by using '-' char because the name of all external connector use the '-' char instead of '_' char. - "USB_HOST" -> "USB-HOST" Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Add new EXTCON_CHG_USB_PD type for USB Power DeliveryChanwoo Choi2017-01-091-0/+5
| | | | | | | | | | | This patch adds the new EXTCON_CHG_USB_PD for USB PD (Power Delivery)[1]. The USB Power Delivery specification specifies that USB cable provides the increased power more than 7.5W to device with larger power demand. The EXTCON_CHG_USB_PD has the EXTCON_TYPE_CHG and EXTCON_TYPE_USB type. [1] https://en.wikipedia.org/wiki/USB#PD Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: usb-gpio: Add pinctrl operation during system PMPeter Chen2017-01-091-0/+7
| | | | | | | | | | | At some systems, the pinctrl setting will be lost or needs to set as "sleep" state to save power consumption. So, we need to configure pinctrl as "sleep" state when system enters suspend, and as "default" state after system resumes. In this way, the pinctrl value can be recovered as "default" state after resuming. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-11 09:02:40 +0000