summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/virtual
Commit message (Collapse)AuthorAgeFilesLines
* drm/amd/display: make virtual_disable_link_output staticAlex Deucher2022-10-111-1/+1
| | | | | | | | It's not used outside of virtual_link_hwss.c. Fixes a -Wmissing-prototypes warning. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: rework recent update PHY state commitWenjing Liu2022-09-191-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] Original change 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Move all linux includes into OS typesHarry Wentland2022-07-052-4/+0
| | | | | | | | | Move all linux includes into OS types. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: add virtual_setup_stream_attribute decl to headerTom Rix2022-04-191-0/+1
| | | | | | | | | | | | | | | | Smatch reports this issue virtual_link_hwss.c:32:6: warning: symbol 'virtual_setup_stream_attribute' was not declared. Should it be static? virtual_setup_stream_attribute is only used in virtual_link_hwss.c, but the other functions in the file are declared in the header file and used elsewhere. For consistency, add the virtual_setup_stream_attribute decl to virtual_link_hwss.h. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: extract set stream attribute to link_hwssWenjing Liu2022-04-051-0/+5
| | | | | | | | | | | | [why] Extract set stream attribute into link_hwss as part of the link hwss refactor work. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: move link_hwss to link folder and break down to filesWenjing Liu2022-02-023-1/+78
| | | | | | | | | | | | [why] Move link_hwss to its own folder as part of DC LIB and break it down to separate file one for each type of backend for code isolation. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: add set dp lane settings to link_hwssWenjing Liu2022-02-021-1/+2
| | | | | | | | | | | | | [why] Factor set dp lane settings to link_hwss. v2: fix statement with no effect warning (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Fix issue with dynamic bpp change for DCN3xGuo, Bing2021-09-231-1/+2
| | | | | | | | | | | | | | | | | Why: Screen sometimes would have artifacts or blink once at the time when bpp is dynamically changed. How: 1. Changed to update PPS infopacket in frame mode instead of immediate mode since other updates for bpp change are double-buffered. 2. Changed double-buffering enablement programming for DCN30 as advised by ASIC team Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add DPCD writes at key pointsLeo (Hanghong) Ma2021-09-141-0/+2
| | | | | | | | | | | | | This reverts commit "Revert "Add DPCD writes at key points" ". The following patch will fix the system hang issue. v2: squash in indentation warning fix Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add dp_set_dsc_pps_info_packet to virtual stream encoderEric Bernstein2020-09-291-0/+7
| | | | | | | Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Rename set_mst_bandwidth to align with DP specGeorge Shen2020-09-151-4/+5
| | | | | | | | | | | | | | [Why] The function set_mst_bandwidth is poorly name since it isn't clear what it does, and it also does not reflect any part of the allocation sequence described in the DP spec. [How] Rename the function set_mst_bandwidth to set_throttled_vcp_size. Signed-off-by: George Shen <george.shen@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Update virtual stream encoderEric Bernstein2020-08-041-0/+13
| | | | | | | Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: determine USB C DP2 mode only when USB DP Alt is enabledWenjing Liu2020-04-091-0/+9
| | | | | | | | | | | | | | | | [why] When display is connected with a native DP port, DP2 mode register value is a don't care. Driver mistakenly reduce max supported lane count to 2 lane based on the don't care value. [how] Add additional check only if USB C DP alt mode is enabled, we will determine max lane count supported based on current mode. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTEDBhawanpreet Lakha2019-11-131-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: set MSA MISC1 bit 6 while sending colorimetry in VSC SDPAnthony Koo2019-11-131-0/+1
| | | | | | | | | | | | | | | | | | | | | [Why] It is confusing to sinks if we send VSC SDP only on some format. Today we signal colorimetry format using MSA while in formats like sRGB. But when we switch to BT2020 we set the bit to ignore MSA colorimetry and instead use the colorimetry information in the VSC SDP. But if sink supports signaling of colorimetry via VSC SDP we should always set the MSA MISC1 bit 6, instead of doing so selectively. [How] If sink supports signaling of colorimetry via VSC SDP, and we are sending the colorimetry info via VSC SDP with packet revision 05h, then always set MSA MISC1 bit 6. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: reset hdmi tmds rate and data scramble on pipe resetWenjing Liu2019-08-151-0/+5
| | | | | | | | | | | | | [why] hdmi data scramble and tmds rate is not reset during pipe reset. [how] reset hdmi tmds rate and data scramble on pipe reset Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge branch 'drm-next' into drm-next-5.3Alex Deucher2019-06-252-0/+4
|\ | | | | | | | | | | Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amd: drop use of drmp.h in os_types.hSam Ravnborg2019-06-102-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop use of the deprecated drmP.h from display/dc/os_types.h Fix all fallout after this change. Most of the fixes was adding a missing include of vmalloc.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-4-sam@ravnborg.org
* | drm/amd/display: Add DSC support for Navi (v2)Harry Wentland2019-06-221-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for DCN2 DSC (Display Stream Compression) HW Blocks: +--------++------+ +----------+ | HUBBUB || HUBP | <-- | MMHUBBUB | +--------++------+ +----------+ | ^ v | +--------+ +--------+ | DPP | | DWB | +--------+ +--------+ | v ^ +--------+ | | MPC | | +--------+ | | | v | +-------+ +-------+ | | OPP | <--> | DSC | | +-------+ +-------+ | | | v | +--------+ / | OPTC | -------------- +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ v2: rebase (Alex) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | drm/amd/display: Add DCN2 DIOHarry Wentland2019-06-211-0/+5
|/ | | | | | | | | | | | | | Add support for the DIO (Display IO) block of DCN2, which entails our stream and link encoders. HW Blocks: +--------+ | DIO | +--------+ Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Pass SDP spliting in parametersNikola Cornij2019-03-271-1/+2
| | | | | | | | | pass SDP splitting when setting stream attributes for future use Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Pass signal directly to enable_tmds_outputHarry Wentland2018-03-071-2/+1
| | | | | | | | | | This makes the check for HDMI and dual-link DVI a bit more straightforward. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* BackMerge tag 'v4.15-rc4' into drm-nextDave Airlie2017-12-191-0/+21
|\ | | | | | | | | | | Linux 4.15-rc4 Daniel requested it to fix some messy conflicts.
| * drm/amdgpu: add license to MakefilesAlex Deucher2017-12-041-0/+21
| | | | | | | | | | | | | | | | | | Was missing license text. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | drm/amd/display: Don't use dc_link in link_encoderAndrew Jiang2017-12-061-2/+1
|/ | | | | | | | | | | dc_link is at a higher level than link_encoder, and we only want higher-level components to be able to access lower-level ones, not the other way around. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Move power control from link encoder to hwsequencerAndrew Jiang2017-10-211-5/+0
| | | | | | | | | | | | | | | | A recent commit moved the backlight control code along with the register defines, but did not move the power control code. This along with remnant fields in the dce110_link_enc_registers struct made it so that the code still compiled, but any attempts to access the LVTMA_PWRSEQ_STATE register led to reading from an address of 0. This patch corrects that. Also, rename blacklight_control to edp_backlight_control (Typo fix). Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: moving backlight registers to hwsequencerYue Hin Lau2017-10-211-6/+2
| | | | | | | Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Use kernel alloc/freeHarry Wentland2017-09-282-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Abstractions are frowned upon. cocci script: virtual context virtual patch virtual org virtual report @@ expression ptr; @@ - dm_alloc(ptr) + kzalloc(ptr, GFP_KERNEL) @@ expression ptr, size; @@ - dm_realloc(ptr, size) + krealloc(ptr, size, GFP_KERNEL) @@ expression ptr; @@ - dm_free(ptr) + kfree(ptr) v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Rename dc_stream to dc_stream_stateHarry Wentland2017-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream/struct dc_stream_state/g' find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream_state_update/struct dc_stream_update/g' find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream_state_status/struct dc_stream_status/g' Plus some manual changes Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Roll core_stream into dc_streamLeo (Sunpeng) Li2017-09-261-1/+1
| | | | | | Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Move stream validations into seperate function.Andrey Grodzovsky2017-09-261-1/+1
| | | | | | | | | | | | | Stateless streams validations (not require resource population) moved into hook to be called directly from DM. Call dc_validate_stream be before validate_with_context for non Linux APIs Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix aviInfoFrame bar Info and add set_avMuteCharlene Liu2017-09-261-0/+4
| | | | | | | Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Move backlight from encoder to ABMAnthony Koo2017-09-261-13/+0
| | | | | | | Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: simplify link_encoderTony Cheng2017-09-261-4/+0
| | | | | | | | | - remove unnecessary feature flags - remove wireless and VGA validation Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/dc: Add dc display driver (v2)Harry Wentland2017-09-265-0/+364
Supported DCE versions: 8.0, 10.0, 11.0, 11.2 v2: rebase against 4.11 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-14 22:15:15 +0000