summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/i915_debugfs.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/i915: Pull obj->userfault tracking under the ggtt->mutexChris Wilson2019-08-221-1/+1
| | | | | | | | | | Since we want to revoke the ggtt vma from only under the ggtt->mutex, we need to move protection of the userfault tracking from the struct_mutex to the ggtt->mutex. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-2-chris@chris-wilson.co.uk
* drm/i915: Track ggtt fence reservations under its own mutexChris Wilson2019-08-221-2/+3
| | | | | | | | | | | | We can reduce the locking for fence registers from the dev->struct_mutex to a local mutex. We could introduce a mutex for the sole purpose of tracking the fence acquisition, except there is a little bit of overlap with the fault tracking, so use the i915_ggtt.mutex as it covers both. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-1-chris@chris-wilson.co.uk
* drm/i915/guc: Don't open log relay if GuC is not runningMichal Wajdeczko2019-08-181-8/+9
| | | | | | | | | | | | | | As we plan to continue driver load after GuC initialization failure, we can't assume that GuC log data will be available just because GuC was initially enabled. We must check that GuC is still running instead. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-2-michal.wajdeczko@intel.com
* drm/i915: Extract intel_frontbuffer active trackingChris Wilson2019-08-161-5/+0
| | | | | | | | | | | | | Move the active tracking for the frontbuffer operations out of the i915_gem_object and into its own first class (refcounted) object. In the process of detangling, we switch from low level request tracking to the easier i915_active -- with the plan that this avoids any potential atomic callbacks as the frontbuffer tracking wishes to sleep as it flushes. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190816074635.26062-1-chris@chris-wilson.co.uk
* drm/i915/guc: Remove client->submissionsDaniele Ceraolo Spurio2019-08-141-24/+8
| | | | | | | | | | | | | | | | The engine->guc_id is GuC FW defined and it is not guaranteed to be below I915_NUM_ENGINES, so we shouldn't use it with the i915-defined client->submissions, as we might overflow. Instead of fixing it, just get rid of client->submissions, because the information we get from it is not interesting anymore now that we only have 1 client. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190814002145.29056-1-daniele.ceraolospurio@intel.com
* drm/i915: Forgo last_fence active request trackingChris Wilson2019-08-121-3/+1
| | | | | | | | | | | | | | | | | We were using the last_fence to track the last request that used this vma that might be interpreted by a fence register and forced ourselves to wait for this request before modifying any fence register that overlapped our vma. Due to requirement that we need to track any XY_BLT command, linear or tiled, this in effect meant that we have to track the vma for its active lifespan anyway, so we can forgo the explicit last_fence tracking and just use the whole vma->active. Another solution would be to pipeline the register updates, and would help resolve some long running stalls for gen3 (but only gen 2 and 3!) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812174804.26180-1-chris@chris-wilson.co.uk
* drm/i915: Remove unused debugfs/i915_emon_statusChris Wilson2019-08-111-25/+0
| | | | | | | | | | | Before we start upon our great GT interrupt refactor, throw out the cruft! In this case, it is an unloved debugfs showing the current ips status, a fairly meaningless bunch of numbers that we are not checking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Acked-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190810090329.6966-1-chris@chris-wilson.co.uk
* drm/i915: split out uncore_mmio_debugDaniele Ceraolo Spurio2019-08-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Multiple uncore structures will share the debug infrastructure, so move it to a common place and add extra locking around it. Also, since we now have a separate object, it is cleaner to have dedicated functions working on the object to stop and restart the mmio debug. Apart from the cosmetic changes, this patch introduces 2 functional updates: - All calls to check_for_unclaimed_mmio will now return false when the debug is suspended, not just the ones that are active only when i915_modparams.mmio_debug is set. If we don't trust the result of the check while a user is doing mmio access then we shouldn't attempt the check anywhere. - i915_modparams.mmio_debug is not save/restored anymore around user access. The value is now never touched by the kernel while debug is disabled so no need for save/restore. v2: squash mmio_debug patches, restrict mmio_debug lock usage (Chris) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190809063116.7527-1-chris@chris-wilson.co.uk
* drm/i915: Push the ring creation flags to the backendChris Wilson2019-08-091-8/+15
| | | | | | | | | | Push the ring creation flags from the outer GEM context to the inner intel_context to avoid an unsightly back-reference from inside the backend. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-3-chris@chris-wilson.co.uk
* drm/i915: Make debugfs/per_file_stats scale betterChris Wilson2019-08-081-23/+38
| | | | | | | | | | | Currently we walk the entire list of obj->vma for each obj within a file to find the matching vma of this context. Since we know we are searching for a particular vma bound to a user context, we can use the rbtree to search for it rather than repeatedly walk everything. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808162407.28121-1-chris@chris-wilson.co.uk
* drm/i915: Defer final intel_wakeref_put to process contextChris Wilson2019-08-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we need to acquire a mutex to serialise the final intel_wakeref_put, we need to ensure that we are in process context at that time. However, we want to allow operation on the intel_wakeref from inside timer and other hardirq context, which means that need to defer that final put to a workqueue. Inside the final wakeref puts, we are safe to operate in any context, as we are simply marking up the HW and state tracking for the potential sleep. It's only the serialisation with the potential sleeping getting that requires careful wait avoidance. This allows us to retain the immediate processing as before (we only need to sleep over the same races as the current mutex_lock). v2: Add a selftest to ensure we exercise the code while lockdep watches. v3: That test was extremely loud and complained about many things! v4: Not a whale! Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111295 References: https://bugs.freedesktop.org/show_bug.cgi?id=111245 References: https://bugs.freedesktop.org/show_bug.cgi?id=111256 Fixes: 18398904ca9e ("drm/i915: Only recover active engines") Fixes: 51fbd8de87dc ("drm/i915/pmu: Atomically acquire the gt_pm wakeref") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808202758.10453-1-chris@chris-wilson.co.uk
* drm/i915: rename intel_drv.h to display/intel_display_types.hJani Nikula2019-08-071-1/+1
| | | | | | | | | | | | | | | Everything about the file is about display, and mostly about types related to display. Move under display/ as intel_display_types.h to reflect the facts. There's still plenty to clean up, but start off with moving the file where it logically belongs and naming according to contents. v2: fix the include guard name in the renamed file Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com
* drm/i915: avoid including intel_drv.h via i915_drv.h->i915_trace.hJani Nikula2019-08-071-0/+1
| | | | | | | | | | Disentangle i915_drv.h from intel_drv.h, which gets included via i915_trace.h. This necessitates including i915_trace.h wherever it's needed. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ed82bf259d3b725a1a1a3c3e9d6fb5c08bc4d489.1565085691.git.jani.nikula@intel.com
* drm/i915/gt: Move the [class][inst] lookup for engines onto the GTChris Wilson2019-08-061-11/+6
| | | | | | | | | | | | | | | | | To maintain a fast lookup from a GT centric irq handler, we want the engine lookup tables on the intel_gt. To avoid having multiple copies of the same multi-dimension lookup table, move the generic user engine lookup into an rbtree (for fast and flexible indexing). v2: Split uabi_instance cf uabi_class v3: Set uabi_class/uabi_instance after collating all engines to provide a stable uabi across parallel unordered construction. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20190806124300.24945-2-chris@chris-wilson.co.uk
* drm/i915: Replace struct_mutex for batch pool serialisationChris Wilson2019-08-041-68/+0
| | | | | | | | | | Switch to tracking activity via i915_active on individual nodes, only keeping a list of retired objects in the cache, and reaping the cache when the engine itself idles. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190804124826.30272-2-chris@chris-wilson.co.uk
* drm/i915: Hide unshrinkable context objects from the shrinkerChris Wilson2019-08-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | The shrinker cannot touch objects used by the contexts (logical state and ring). Currently we mark those as "pin_global" to let the shrinker skip over them, however, if we remove them from the shrinker lists entirely, we don't event have to include them in our shrink accounting. By keeping the unshrinkable objects in our shrinker tracking, we report a large number of objects available to be shrunk, and leave the shrinker deeply unsatisfied when we fail to reclaim those. The shrinker will persist in trying to reclaim the unavailable objects, forcing the system into a livelock (not even hitting the dread oomkiller). v2: Extend unshrinkable protection for perma-pinned scratch and guc allocations (Tvrtko) v3: Notice that we should be pinned when marking unshrinkable and so the link cannot be empty; merge duplicate paths. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190802212137.22207-1-chris@chris-wilson.co.uk
* drm/i915/uc: Move GuC error log to uc and release it on finiMichal Wajdeczko2019-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we fail to load GuC and want to abort probe, we hit: <7> [229.915779] i915 0000:00:02.0: [drm:intel_uc_init_hw [i915]] GuC initialization failed -6 <7> [229.915813] i915 0000:00:02.0: [drm:i915_gem_init_hw [i915]] Enabling uc failed (-6) <4> [229.953354] ------------[ cut here ]------------ <4> [229.953355] WARN_ON(dev_priv->mm.shrink_count) <4> [229.953406] WARNING: CPU: 9 PID: 3287 at drivers/gpu/drm/i915/i915_gem.c:1684 i915_gem_cleanup_early+0xfc/0x110 [i915] <4> [229.953464] Call Trace: <4> [229.953489] i915_driver_late_release+0x19/0x60 [i915] <4> [229.953514] i915_driver_probe+0xb82/0x18a0 [i915] <4> [229.953519] ? __pm_runtime_resume+0x4f/0x80 <4> [229.953545] i915_pci_probe+0x43/0x1b0 [i915] ... <4> [229.962951] ------------[ cut here ]------------ <4> [229.962956] DEBUG_LOCKS_WARN_ON(lock->magic != lock) <4> [229.962959] WARNING: CPU: 8 PID: 2395 at kernel/locking/mutex.c:912 __mutex_lock+0x750/0x9b0 <4> [229.963091] Call Trace: <4> [229.963129] ? i915_vma_destroy+0x86/0x350 [i915] <4> [229.963166] ? i915_vma_destroy+0x86/0x350 [i915] <4> [229.963201] i915_vma_destroy+0x86/0x350 [i915] <4> [229.963236] __i915_gem_free_objects+0xb8/0x510 [i915] <4> [229.963270] __i915_gem_free_work+0x5a/0x90 [i915] <4> [229.963275] process_one_work+0x245/0x610 as since commit 6f76098fe0f3 ("drm/i915/uc: Move uC early functions inside the GT ones") we cleanup uc after gem. Move captured GuC load error log to uc struct and release it in intel_uc_fini() instead of intel_uc_driver_late_release() Note that intel_uc_driver_late_release() is now empty, but we can leave it as a placeholder for future code. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190802184055.31988-5-michal.wajdeczko@intel.com
* drm/i915/tgl: Add and use new DC5 and DC6 residency counter registersJosé Roberto de Souza2019-08-011-8/+13
| | | | | | | | | | | | | | Tiger Lake has a new register offset for DC5 and DC6 residency counters. v2: - Rename registers since they are not in the CSR memory range (requested by Anshuman) - Fix type (requested by Matthew) Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190726002412.5827-2-lucas.demarchi@intel.com
* drm/i915/uc: Unify uC platform checkDaniele Ceraolo Spurio2019-07-251-3/+3
| | | | | | | | | | | | | | | | | We have several HAS_* checks for GuC and HuC but we mostly use HAS_GUC and HAS_HUC, with only 1 exception. Since our HW always has either both uC or neither of them, just replace all the checks with a unified HAS_UC. v2: use HAS_GT_UC (Michal) v3: fix comment (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-2-daniele.ceraolospurio@intel.com
* drm/i915: Add HDCP capability info to i915_display_info.Anshuman Gupta2019-07-231-12/+28
| | | | | | | | | | | | | | | | | | | | | To identify the HDCP capability of the display connected to CI systems, we need to add the hdcp capability probing in i915_display_info. This will also help to populate the HDCP capability of the CI systems to CI H/W logs maintained at https://intel-gfx-ci.01.org/hardware/. It will facilitate to determine the kms_content_protection behavior on a particular CI system. v2: Reused the intel_hdcp_info() in i915_hdcp_sink_capability_show(). [Ram] Shifted intel_hdcp_info() to the end of intel_dp_info. [Ram] v3: used seq_puts() instead of seq_pritnf(). [Ram] Cc: daniel.vetter@intel.com Cc: ramalingam.c@intel.com Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190719055513.2089-1-anshuman.gupta@intel.com
* drm/i915: Add support for retrying hotplugImre Deak2019-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | There is some scenarios that we are aware that sink probe can fail, so lets add the infrastructure to let hotplug() hook to request another probe after some time. v2: Handle shared HPD pins (Imre) v3: Rebased v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep it consistent(Rodrigo) v5: Making the working queue used explicit through all the callers to hotplug_work (Ville) Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-1-jose.souza@intel.com
* drm/i915/uc: move GuC/HuC inside intel_gt under a new intel_ucDaniele Ceraolo Spurio2019-07-131-13/+13
| | | | | | | | | | | | | | | | | | Being part of the GT HW, it make sense to keep the guc/huc structures inside the GT structure. To help with the encapsulation work done by the following patches, both structures are placed inside a new intel_uc container. Although this results in code with ugly nested dereferences (i915->gt.uc.guc...), it saves us the extra work required in moving the structures twice (i915 -> gt -> uc). The following patches will reduce the number of places where we try to access the guc/huc structures directly from i915 and reduce the ugliness. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-7-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915/uc: move GuC and HuC files under gt/uc/Daniele Ceraolo Spurio2019-07-131-1/+1
| | | | | | | | | | | | | | Both microcontrollers are part of the GT HW and are closely related to GT operations. To keep all the files cleanly together, they've been placed in their own subdir inside the gt/ folder Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-6-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
* drm/i915/gt: Use intel_gt as the primary object for handling resetsChris Wilson2019-07-121-39/+24
| | | | | | | | | | | | | Having taken the first step in encapsulating the functionality by moving the related files under gt/, the next step is to start encapsulating by passing around the relevant structs rather than the global drm_i915_private. In this step, we pass intel_gt to intel_reset.c Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk
* drm/i915/tgl: Add power well supportImre Deak2019-07-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds the new power wells introduced by TGL (GEN 12) and maps these to existing/new power domains. The changes for GEN 12 wrt to GEN 11 are the following: - Transcoder#EDP removed from power well#1 (Transcoder#A used in low-power mode instead) - Transcoder#A is now backed by power well#1 instead of power well#3 - The DDI#B/C combo PHY ports are now backed by power well#1 instead of power well#3 - New power well#5 added for pipe#D functionality (TODO) - 2 additional TC ports (TC#5-6) backed by power well#3, 2 port specific IO power wells (only for the non-TBT modes) and 4 port specific AUX power wells (2-2 for TBT vs. non-TBT modes) - Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for eDP and MIPI DSI (TODO) On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we have the following naming for ports: - Combo PHYs (native DP/HDMI): DDI#A-B - TBT/non-TBT (TC altmode, native DP/HDMI) PHYs: DDI#C-F Starting from GEN 12 we have the following naming for ports: - Combo PHYs (native DP/HDMI): DDI#A-C - TBT/non-TBT (TC altmode, native DP/HDMI) PHYs: DDI TC#1-6 To save some space in the power domain enum the power domain naming in the driver reflects the above change, that is power domains TC#1-3 are added as aliases for DDI#D-F and new power domains are reserved for TC#4-6. v2 (Lucas): - Separate out the bits and definitions for TGL from the ICL ones. Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since we don't define TRANSCODER_A_VDSC power domain to spare a one bit in the bitmask (suggested by Ville) v3 (Lucas): - Fix missing squashes on v2 - Rebase on renamed TRANSCODER_EDP_VDSC Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-9-lucas.demarchi@intel.com
* drm/i915/guc: Simplify guc clientDaniele Ceraolo Spurio2019-07-111-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | We originally added support, in some cases partial, for different modes of operations via guc clients: - proxy vs direct submission; - variable engine mask per-client. We only ever used one flow (all submissions via a single proxy), so the other code paths haven't been exercised and are most likely non-functional. The guc firmware interface is also in the process of being updated to better fit the i915 flow and our client abstraction will need to change accordingly (or possibly go away entirely), so these old unused paths can be considered dead and removed. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Acked-by: Matthew Brost <Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-3-daniele.ceraolospurio@intel.com
* drm/i915/guc: Remove preemption support for current fwChris Wilson2019-07-111-5/+0
| | | | | | | | | | | | | | | | | | | | | | Preemption via GuC submission is not being supported with its current legacy incarnation. The current FW does support a similar pre-emption flow via H2G, but it is class-based instead of being instance-based, which doesn't fit well with the i915 tracking. To fix this, the firmware is being updated to better support our needs with a new flow, so we can safely remove the old code. v2 (Daniele): resurrect & rebase, reword commit message, remove preempt_context as well Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Acked-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-2-daniele.ceraolospurio@intel.com
* drm/i915: Show instdone for each engine in debugfsChris Wilson2019-07-041-20/+13
| | | | | | | | | | Although polling each engine quickly is preferable as it should give us a sample of each engine at roughly the same time, keep it simple and just sample the engine as print out the debug state. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190704200455.14870-3-chris@chris-wilson.co.uk
* drm/i915: Dump w/a lists on all enginesChris Wilson2019-07-041-7/+21
| | | | | | | | | | We store separate wa_list on every engine, so be sure to include all when dumping the current set via debugfs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190703135805.7310-1-chris@chris-wilson.co.uk
* drm/i915: synchronize_irq() against the actual irqVille Syrjälä2019-07-031-1/+1
| | | | | | | | | | | | | | | | | | When eliminating our use of drm_irq_install() I failed to convert all our synchronize_irq() calls to consult pdev->irq instead of dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq we're no longer synchronizing against anything. v2: Add intel_syncrhonize_irq() (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Imre Deak <imre.deak@intel.com> Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com
* drm/i915: Throw away the active object retirement complexityChris Wilson2019-06-211-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | Remove the accumulated optimisations that we have for i915_vma_retire and reduce it to the bare essential of tracking the active object reference. This allows us to only use atomic operations, and so will be able to avoid the struct_mutex requirement. The principal loss here is the shrinker MRU bumping, so now if we have to shrink, we will do so in much more random order and more likely to try and shrink recently used objects. That is a nuisance, but shrinking active objects is a second step we try to avoid and will always be a system-wide performance issue. The other loss is here is in the automatic pruning of the reservation_object when idling. This is not as large an issue as upon reservation_object introduction as now adding new fences into the object replaces already signaled fences, keeping the array compact. But we do lose the auto-expiration of stale fences and unused arrays. That may be a noticeable problem for which we need to re-implement autopruning. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-3-chris@chris-wilson.co.uk
* drm/i915: no need to check return value of debugfs_create functionsGreg Kroah-Hartman2019-06-171-13/+7
| | | | | | | | | | | | | | | | | When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613145229.21389-1-jani.nikula@intel.com
* drm/i915: move modesetting core code under display/Jani Nikula2019-06-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Now that we have a new subdirectory for display code, continue by moving modesetting core code. display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this is, again, a surprisingly clean operation. v2: - don't move intel_sideband.[ch] (Ville) - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
* drm/i915: move modesetting output/encoder code under display/Jani Nikula2019-06-171-2/+3
| | | | | | | | | | | | | | | | | | | | | Add a new subdirectory for display code, and start off by moving modesetting output/encoder code. Judging by the include changes, this is a surprisingly clean operation. v2: - move intel_sdvo_regs.h too - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com
* drm/i915: update with_intel_runtime_pm to use the rpm structureDaniele Ceraolo Spurio2019-06-141-12/+12
| | | | | | | | | | | Matching the underlying get/put functions. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com
* drm/i915: update rpm_get/put to use the rpm structureDaniele Ceraolo Spurio2019-06-141-24/+25
| | | | | | | | | | | | | | The functions where internally already only using the structure, so we need to just flip the interface. v2: rebase Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com
* drm/i915: move a few more functions to accept the rpm structureDaniele Ceraolo Spurio2019-06-141-1/+1
| | | | | | | | | | | Focusing on the functions called in few places. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-6-daniele.ceraolospurio@intel.com
* drm/i915: Move fence register tracking from i915->mm to ggttChris Wilson2019-06-131-20/+22
| | | | | | | | | | | As the fence registers only apply to regions inside the GGTT is makes more sense that we track these as part of the i915_ggtt and not the general mm. In the next patch, we will then pull the register locking underneath the i915_ggtt.mutex. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk
* drm/i915: Remove I915_READ16 and I915_WRITE16Tvrtko Ursulin2019-06-121-17/+20
| | | | | | | | | Remove call sites in favour of uncore mmio accessors and remove the old macros. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-6-tvrtko.ursulin@linux.intel.com
* drm/i915: Combine unbound/bound list tracking for objectsChris Wilson2019-06-121-183/+8
| | | | | | | | | | | | With async binding, we don't want to manage a bound/unbound list as we may end up running before we even acquire the pages. All that is required is keeping track of shrinkable objects, so reduce it to the minimum list. Fixes: 6951e5893b48 ("drm/i915: Move GEM object domain management from struct_mutex to local") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190612105720.30310-1-chris@chris-wilson.co.uk
* drm/i915: Pull kref into i915_address_spaceChris Wilson2019-06-111-1/+1
| | | | | | | | | Make the kref common to both derived structs (i915_ggtt and i915_ppgtt) so that we can safely reference count an abstract ctx->vm address space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-1-chris@chris-wilson.co.uk
* drm/i915: Promote i915->mm.obj_lock to be irqsafeChris Wilson2019-06-101-4/+6
| | | | | | | | | | | | | | | | | The intent is to be able to update the mm.lists from inside an irqsoff section (e.g. from a softirq rcu workqueue), ergo we need to make the i915->mm.obj_lock irqsafe. v2: can_discard_pages() ensures we are shrinkable v3: Beware shadowing of 'flags' Fixes: 3b4fa9640ccd ("drm/i915: Track the purgeable objects on a separate eviction list") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110869 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610145430.17717-1-chris@chris-wilson.co.uk
* drm/i915: Report all objects with allocated pages to the shrinkerChris Wilson2019-05-311-54/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we try to report to the shrinker the precise number of objects (pages) that are available to be reaped at this moment. This requires searching all objects with allocated pages to see if they fulfill the search criteria, and this count is performed quite frequently. (The shrinker tries to free ~128 pages on each invocation, before which we count all the objects; counting takes longer than unbinding the objects!) If we take the pragmatic view that with sufficient desire, all objects are eventually reapable (they become inactive, or no longer used as framebuffer etc), we can simply return the count of pinned pages maintained during get_pages/put_pages rather than walk the lists every time. The downside is that we may (slightly) over-report the number of objects/pages we could shrink and so penalize ourselves by shrinking more than required. This is mitigated by keeping the order in which we shrink objects such that we avoid penalizing active and frequently used objects, and if memory is so tight that we need to free them we would need to anyway. v2: Only expose shrinkable objects to the shrinker; a small reduction in not considering stolen and foreign objects. v3: Restore the tracking from a "backup" copy from before the gem/ split Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-2-chris@chris-wilson.co.uk
* Revert "drm/i915: Expand subslice mask"Jani Nikula2019-05-291-21/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 1ac159e23c2c ("drm/i915: Expand subslice mask"), which kills ICL due to GEM_BUG_ON() sanity checks before CI even gets a chance to do anything. The commit exposes an issue in commit 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads"), which will also need to be addressed. There's a proposed fix [1], but considering the seeming uncertainty with the fix as well as the size of the regressing commit (in this context, the one that actually brings down ICL), this warrants a revert to get ICL working, and gives us time to get all of this right without rushing. Even if this means shooting the messenger. <3>[ 9.426327] intel_sseu_get_subslices:46 GEM_BUG_ON(slice >= sseu->max_slices) <4>[ 9.426355] ------------[ cut here ]------------ <2>[ 9.426357] kernel BUG at drivers/gpu/drm/i915/gt/intel_sseu.c:46! <4>[ 9.426371] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 9.426377] CPU: 1 PID: 364 Comm: systemd-udevd Not tainted 5.2.0-rc2-CI-CI_DRM_6159+ #1 <4>[ 9.426385] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4>[ 9.426444] RIP: 0010:intel_sseu_get_subslices+0x8a/0xe0 [i915] <4>[ 9.426452] Code: d5 76 b7 e0 48 8b 35 9d 24 21 00 49 c7 c0 07 f0 72 a0 b9 2e 00 00 00 48 c7 c2 00 8e 6d a0 48 c7 c7 a5 14 5b a0 e8 36 3c be e0 <0f> 0b 48 c7 c1 80 d5 6f a0 ba 30 00 00 00 48 c7 c6 00 8e 6d a0 48 <4>[ 9.426468] RSP: 0018:ffffc9000037b9c8 EFLAGS: 00010282 <4>[ 9.426475] RAX: 000000000000000f RBX: 0000000000000000 RCX: 0000000000000000 <4>[ 9.426482] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88849e346f98 <4>[ 9.426490] RBP: ffff88848a200000 R08: 0000000000000004 R09: ffff88849d50b000 <4>[ 9.426497] R10: 0000000000000000 R11: ffff88849e346f98 R12: ffff88848a209e78 <4>[ 9.426505] R13: 0000000003000000 R14: ffff88848a20b1a8 R15: 0000000000000000 <4>[ 9.426513] FS: 00007f73d5ae8680(0000) GS:ffff88849fc80000(0000) knlGS:0000000000000000 <4>[ 9.426521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 9.426527] CR2: 0000561417b01260 CR3: 0000000494764003 CR4: 0000000000760ee0 <4>[ 9.426535] PKRU: 55555554 <4>[ 9.426538] Call Trace: <4>[ 9.426585] wa_init_mcr+0xd5/0x110 [i915] <4>[ 9.426597] ? lock_acquire+0xa6/0x1c0 <4>[ 9.426645] icl_gt_workarounds_init+0x21/0x1a0 [i915] <4>[ 9.426694] ? i915_driver_load+0xfcf/0x18a0 [i915] <4>[ 9.426739] gt_init_workarounds+0x14c/0x230 [i915] <4>[ 9.426748] ? _raw_spin_unlock_irq+0x24/0x50 <4>[ 9.426789] intel_gt_init_workarounds+0x1b/0x30 [i915] <4>[ 9.426835] i915_driver_load+0xfd7/0x18a0 [i915] <4>[ 9.426843] ? lock_acquire+0xa6/0x1c0 <4>[ 9.426850] ? __pm_runtime_resume+0x4f/0x80 <4>[ 9.426857] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 9.426863] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 9.426870] ? lockdep_hardirqs_on+0xe3/0x1b0 <4>[ 9.426915] i915_pci_probe+0x29/0xa0 [i915] <4>[ 9.426923] pci_device_probe+0x9e/0x120 <4>[ 9.426930] really_probe+0xea/0x3c0 <4>[ 9.426936] driver_probe_device+0x10b/0x120 <4>[ 9.426942] device_driver_attach+0x4a/0x50 <4>[ 9.426948] __driver_attach+0x97/0x130 <4>[ 9.426954] ? device_driver_attach+0x50/0x50 <4>[ 9.426960] bus_for_each_dev+0x74/0xc0 <4>[ 9.426966] bus_add_driver+0x13f/0x210 <4>[ 9.426971] ? 0xffffffffa083b000 <4>[ 9.426976] driver_register+0x56/0xe0 <4>[ 9.426982] ? 0xffffffffa083b000 <4>[ 9.426987] do_one_initcall+0x58/0x300 <4>[ 9.426994] ? do_init_module+0x1d/0x1f6 <4>[ 9.427001] ? rcu_read_lock_sched_held+0x6f/0x80 <4>[ 9.427007] ? kmem_cache_alloc_trace+0x261/0x290 <4>[ 9.427014] do_init_module+0x56/0x1f6 <4>[ 9.427020] load_module+0x24d1/0x2990 <4>[ 9.427032] ? __se_sys_finit_module+0xd3/0xf0 <4>[ 9.427037] __se_sys_finit_module+0xd3/0xf0 <4>[ 9.427047] do_syscall_64+0x55/0x1c0 <4>[ 9.427053] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 9.427059] RIP: 0033:0x7f73d5609839 <4>[ 9.427064] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 <4>[ 9.427082] RSP: 002b:00007ffdf34477b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4>[ 9.427091] RAX: ffffffffffffffda RBX: 00005559fd5d7b40 RCX: 00007f73d5609839 <4>[ 9.427099] RDX: 0000000000000000 RSI: 00007f73d52e8145 RDI: 000000000000000f <4>[ 9.427106] RBP: 00007f73d52e8145 R08: 0000000000000000 R09: 00007ffdf34478d0 <4>[ 9.427114] R10: 000000000000000f R11: 0000000000000246 R12: 0000000000000000 <4>[ 9.427121] R13: 00005559fd5c90f0 R14: 0000000000020000 R15: 00005559fd5d7b40 <4>[ 9.427131] Modules linked in: i915(+) mei_hdcp x86_pkg_temp_thermal coretemp snd_hda_intel crct10dif_pclmul crc32_pclmul snd_hda_codec snd_hwdep e1000e snd_hda_core ghash_clmulni_intel ptp snd_pcm cdc_ether usbnet mii pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc <4>[ 9.427254] ---[ end trace af3eeb543bd66e66 ]--- [1] http://patchwork.freedesktop.org/patch/msgid/20190528200655.11605-1-chris@chris-wilson.co.uk References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6159/fi-icl-u2/pstore0-1517155098_Oops_1.log References: 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads") Fixes: 1ac159e23c2c ("drm/i915: Expand subslice mask") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Yunwei Zhang <yunwei.zhang@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190529082150.31526-1-jani.nikula@intel.com
* drm/i915: Expand subslice maskStuart Summers2019-05-281-19/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated: slice * subslice stride + subslice index / 8 v2: fix spacing in set_sseu_info args use set_sseu_info to initialize sseu data when building device status in debugfs rename variables in intel_engine_types.h to avoid checkpatch warnings v3: update headers in intel_sseu.h v4: add const to some sseu_dev_info variables use sseu->eu_stride for EU stride calculations v5: address review comments from Tvrtko and Daniele v6: remove extra space in intel_sseu_get_subslices return the correct subslice enable in for_each_instdone add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size use printk formatted string for subslice mask v7: remove string.h header and rebase Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
* drm/i915: Refactor sseu helper functionsStuart Summers2019-05-281-2/+2
| | | | | | | | | | | | | | | | | | | | | Move functions to intel_sseu.h and remove inline qualifier. Additionally, ensure these are all prefixed with intel_sseu_* to match the convention of other functions in i915. v2: fix spacing from checkpatch warning v3: squash helper function changes into a single patch break 80 character line to fix checkpatch warning move get/set_eus helpers to intel_device_info.c v4: Remove intel_ prefix from static functions in intel_device_info.c and correctly copy changes to stride calculation in those functions. Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com
* drm/i915: Move calculation of subslices per slice to new functionStuart Summers2019-05-281-1/+1
| | | | | | | | | | | | | | Add a new function to return the number of subslices per slice to consolidate code usage. v2: rebase on changes to move sseu struct to intel_sseu.h v3: add intel_* prefix to sseu_subslices_per_slice Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-4-stuart.summers@intel.com
* drm/i915: Move more GEM objects under gem/Chris Wilson2019-05-281-1/+1
| | | | | | | | Continuing the theme of separating out the GEM clutter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-8-chris@chris-wilson.co.uk
* drm/i915: Make sandybridge_pcode_read() deal with the second data registerVille Syrjälä2019-05-271-2/+2
| | | | | | | | | | | | The pcode mailbox has two data registers. So far we've only ever used the one, but that's about to change. Expose the second data register to the callers of sandybridge_pcode_read(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190521164025.30225-1-ville.syrjala@linux.intel.com
* drm/i915: Add a new "remapped" gtt_viewVille Syrjälä2019-05-201-0/+12
| | | | | | | | | | | | | | | | | | | | | | | To overcome display engine stride limits we'll want to remap the pages in the GTT. To that end we need a new gtt_view type which is just like the "rotated" type except not rotated. v2: Use intel_remapped_plane_info base type s/unused/unused_mbz/ (Chris) Separate BUILD_BUG_ON()s (Chris) Use I915_GTT_PAGE_SIZE (Chris) v3: Use i915_gem_object_get_dma_address() (Chris) Trim the sg (Tvrtko) v4: Actually trim this time. Limit the max length to one row of pages to keep things simple Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-29 16:28:39 +0000