| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
| |
Enable the primary plane for mgag200 hardware via atomic_enable.
Atomic helpers invoke this callback only when the plane becomes
active.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-5-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
| |
The primary plane has the atomic_disable helper set, so atomic_update
won't be called if the plane gets disabled. Remove the respective branch
from the helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-4-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While working on a drm driver that doesn't need the i2c algobit stuff I
noticed that DRM selects this code even though only 8 drivers actually use
it. While also only some drivers use i2c, keep the select for I2C for the
next cleanup patch. Still prepare this already by also selecting I2C for
the individual drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove include statements for <drm/drm_fb_helper.h> where it is not
required (i.e., most of them). In a few places include other header
files that are required by the source code.
v3:
* fix amdgpu include statements
* fix rockchip include statements
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-23-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The fb_base in struct drm_mode_config has been unused for a long time.
Some drivers set it and some don't leading to a very confusing state
where the variable can't be relied upon, because there's no indication
as to which driver sets it and which doesn't.
The only usage of fb_base is internal to two drivers so instead of trying
to force it into all the drivers to get it into a coherent state
completely remove it.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For G200_SE_A, PLL M setting is wrong, which leads to blank screen,
or "signal out of range" on VGA display.
previous code had "m |= 0x80" which was changed to
m |= ((pixpllcn & BIT(8)) >> 1);
Tested on G200_SE_A rev 42
This line of code was moved to another file with
commit 877507bb954e ("drm/mgag200: Provide per-device callbacks for
PIXPLLC") but can be easily backported before this commit.
v2: * put BIT(7) First to respect MSB-to-LSB (Thomas)
* Add a comment to explain that this bit must be set (Thomas)
Fixes: 2dd040946ecf ("drm/mgag200: Store values (not bits) in struct mgag200_pll_values")
Cc: stable@vger.kernel.org
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013132810.521945-1-jfalempe@redhat.com
|
|\
| |
| |
| |
| |
| | |
Let's kick-off this release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Pull drm updates from Dave Airlie:
"Lots of stuff all over, some new AMD IP support and gang submit
support. i915 has further DG2 and Meteorlake pieces, and a bunch of
i915 display refactoring. msm has a shrinker rework. There are also a
bunch of conversions to use kunit.
This has two external pieces, some MEI changes needed for future Intel
discrete GPUs. These should be acked by Greg. There is also a cross
maintainer shared tree with some backlight rework from Hans in here.
Core:
- convert selftests to kunit
- managed init for more objects
- move to idr_init_base
- rename fb and gem cma helpers to dma
- hide unregistered connectors from getconnector ioctl
- DSC passthrough aux support
- backlight handling improvements
- add dma_resv_assert_held to vmap/vunmap
edid:
- move luminance calculation to core
fbdev:
- fix aperture helper usage
fourcc:
- add more format helpers
- add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx
- add packed AYUV8888, XYUV8888
- add some kunit tests
ttm:
- allow bos without backing store
- rewrite placement to use intersect/compatible functions
dma-buf:
- docs update
- improve signalling when debugging
udmabuf:
- fix failure path GPF
dp:
- drop dp/mst legacy code
- atomic mst state support
- audio infoframe packing
panel:
- Samsung LTL101AL01
- B120XAN01.0
- R140NWF5 RH
- DMT028VGHMCMI-1A T
- AUO B133UAN02.1
- IVO M133NW4J-R3
- Innolux N120ACA-EA1
amdgpu:
- Gang submit support
- Mode2 reset for RDNA2
- New IP support:
DCN 3.1.4, 3.2
SMU 13.x
NBIO 7.7
GC 11.x
PSP 13.x
SDMA 6.x
GMC 11.x
- DSC passthrough support
- PSP fixes for TA support
- vangogh GFXOFF stats
- clang fixes
- gang submit CS cleanup prep work
- fix VRAM eviction issues
amdkfd:
- GC 10.3 IP ISA fixes
- fix CRIU regression
- CPU fault on COW mapping fixes
i915:
- align fw versioning with kernel practices
- add display substruct to i915 private
- add initial runtime info to driver info
- split out HDCP and backlight registers
- MEI XeHP SDV GSC support
- add per-gt sysfs defaults
- TLB invalidation improvements
- Disable PCI BAR resize on 32-bit
- GuC firmware updates and compat changes
- GuC log timestamp translation
- DG2 preemption workaround changes
- DG2 improved HDMI pixel clocks support
- PCI BAR sanity checks
- Enable DC5 on DG2
- DG2 DMC fw bumped
- ADL-S PCI ID added
- Meteorlake enablement
- Rename ggtt_view to gtt_view
- host RPS fixes
- release mmaps on rpm suspend on discrete
- clocking and dpll refactoring
- VBT definitions and parsing updates
- SKL watermark code extracted to separate file
- allow seamless M/N changes on eDP panels
- BUG_ON removal and cleanups
msm:
- DPU:
simplified VBIF configuration
cleanup CTL interfaces
- DSI:
removed unused msm_display_dsc_config struct
switch regulator calls to new API
switched to PANEL_BRIDGE for direct attached panels
- DSI_PHY: convert drivers to parent_hws
- DP: cleanup pixel_rate handling
- HDMI: turned hdmi-phy-8996 into OF clk provider
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
- gem: Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduce lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
virtio:
- improve error and edge conditions handling
- convert to use managed helpers
- stop exposing LINEAR modifier
mgag200:
- split modeset handling per model
udl:
- suspend/disconnect handling improvements
vc4:
- rework HDMI power up
- depend on PM
- better unplugging support
ast:
- resolution handling improvements
ingenic:
- add JZ4760(B) support
- avoid a modeset when sharpness property is unchanged
- use the new PM ops
it6505:
- power seq and clock updates
ssd130x:
- regmap bulk write
- use atomic helpers instead of simple helpers
via:
- rename via_drv to via_dri1, consolidate all code.
radeon:
- drop DP MST experimental support
- delayed work flush fix
- use time_after
ti-sn65dsi86:
- DP support
mediatek:
- MT8195 DP support
- drop of_gpio header
- remove unneeded result
- small DP code improvements
vkms:
- RGB565, XRGB64 and ARGB64 support
sun4i:
- tv: convert to atomic
rcar-du:
- Synopsys DW HDMI bridge DT bindings update
exynos:
- use drm_display_info.is_hdmi
- correct return of mixer_mode_valid and hdmi_mode_valid
omap:
- refcounting fix
rockchip:
- RK3568 support
- RK3399 gamma support"
* tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits)
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdkfd: Track unified memory when switching xnack mode
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
drm/msm: Fix build break with recent mm tree
drm/panel: simple: Use dev_err_probe() to simplify code
drm/panel: panel-edp: Use dev_err_probe() to simplify code
drm/panel: simple: Add Multi-Inno Technology MI0800FT-9
dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel
drm/amdgpu: correct the memcpy size for ip discovery firmware
drm/amdgpu: Skip put_reset_domain if it doesn't exist
drm/amdgpu: remove switch from amdgpu_gmc_noretry_set
drm/amdgpu: Fix mc_umc_status used uninitialized warning
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/amdgpu: add page retirement handling for CPU RAS
drm/amdgpu: use RAS error address convert api in mca notifier
drm/amdgpu: support to convert dedicated umc mca address
drm/amdgpu: export umc error address convert interface
drm/amdgpu: fix sdma v4 init microcode error
drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()
...
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
G200ER does not seem to support 24 bpp, so force the console to
use 32 bpp. The problem got introduced when commit 73f54d5d9682
("drm/mgag200: Remove special case for G200SE with <2 MiB") changed
the preferred color depth from 32 bit to 24 bit.
A setting of 24 is the correct color depth, but G200ER doesn't seem
to be able to use the respective RGB888 color format. Using 24-bit
color with forced 32 bpp works around the problem.
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 73f54d5d9682 ("drm/mgag200: Remove special case for G200SE with <2 MiB")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220915150348.31504-1-tzimmermann@suse.de
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from mgag200.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in mgag200. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-2-javierm@redhat.com
|
| |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.
Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.
v5:
* rebase on top of udl changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy()
that uses struct iosys_map for buffers. The new function also supports
multi-plane color formats. Convert all users of the original helpers.
v2:
* rebase onto refactored mgag200
* use drm_formap_info_bpp() (Sam)
* do static init in hyperv and mgag200 (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de
|
|\|
| |
| |
| |
| |
| | |
Backmerging to pick up fixes from amdgpu.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Remove the read operation from mgag200_init_pci_options(). It was
incorrectly added while refactoring the code. Reading the PCI option
register clears the register's new value and subsequently leads to
re-writing the old value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: ce19021fd99a ("drm/mgag200: Move PCI-option setup into model-specific code")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220708072114.13960-1-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Each model's specific code is located in a separate file. The type
field in struct mga_device is no unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-15-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The CRTC atomic_enable helper contains per-model branches for
G200ER, G200EV and G200SE devices. Implement a dedicated helper
for each of them and remove the branches from the shared helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-14-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Move the mode-config code into model-specific code and call the
plane/CRTC helpers as needed. This will help with providing per-
model implementations of individual helpers.
Duplication of the pipeline init function is accepted. Some macros
simplify this for shared helpers.
v3:
* clean up style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-13-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Move the PIXPLLC code into per-model source files and wire it up
with per-model callbacks. No functional changes.
The PIXPLLC pixel-clock is part of the CRTC, but really separate
hardware that varies with each model of the G200. Move the PIXPLLC
code for each model into the per-model source file and call it from
CRTC helpers via device functions.
This allows to remove struct mgag200_pll and the related code. The
new callbacks behave like the CRTC's atomic_check and atomic_enable
functions.
v3:
* clean up style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-12-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Move the BMC-related code into its own file and wire it up with device
callbacks.
While programming a new display mode, G200EW3 and G200WB have to de-
synchronize with the BMC. Synchronization is done via VIDRST pins
and controlled via VRSTEN and HRSTEN bits. Move the BMC code behind
a serviceable interface and call it from the CRTC's enable and
disable functions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-11-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
While currently empty, the device callbacks will allow mgag200's
modesetting code to interact with the BMC and PIXPLLC.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-10-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The SCROFF bit controls reading the primary plane's scanout buffer
from video memory. Set it from primary-plane code, instead of CRTC
code.
v3:
* only flip SCROFF when enabling/disabling the plane (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-9-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Drop simple-KMS in favor of regular atomic helpers. Makes the code
more modular and hence better to adapt to per-model requirements.
The simple-KMS helpers provide few extra features, so the patch is
mostly about open-coding what simple-KMS does. The simple-KMS helpers
do mix up plane and CRTC state. Changing to regular atomic helpers
requires to split some of the simple-pipe functions into per-plane
and per-CRTC code
No functional changes.
v3:
* always run drm_atomic_helper_check_plane_state()
* clean up style
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-8-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Move around some modesetting code before dropping simple-KMS helpers.
Makes the next patch more readable. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-7-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Store the primary plane's color format in the CRTC state and use
it for programming the CRTC's gamma LUTs.
Gamma tables (i.e., color management) are provided by the CRTC, but
depend in the primary plane's color format. Store the format in the
CRTC state and use it. This has not been an issue with simple-KMS
helpers, which mix-up plane and CRTC state to some extent. For using
regular atomic helpers, it's necessary to distinguish between the two.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-6-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Hold I/O-register lock in atomic_commit_tail to protect all pipeline
updates at once. Protects against concurrent I/O access in get-modes
helper.
Complex modesetting operations involve mode changes, plane updates and
possibly BMC updates. Make all this atomic wrt to reading display modes
via EDID. It's not so much an issue with simple-KMS helpers, but will
become necessary for using regular atomic helpers.
v4:
* remove empty line
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-5-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The register initialization code contains special cases for G200ER
and G200EW3 hardware. Move this to per-model code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-4-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Provide an init function for each model's DAC registers. Remove
the shared helper.
The code for initializing the DAC registers consisted of a large
table of default value, plus many exceptions for the various G200
models. Providing a per-model implementation makes if more readable.
At some point, some of the initialization should probably move into
the modesetting code.
v2:
* don't duplicate DAC values unnecessarily (Sam, Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-3-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Split mgag200_modeset_init() into smaller helpers to initialize
the mode_config structure and the pipeline. This will be helpful
for transforming this code into per-model functions. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-2-tzimmermann@suse.de
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Remove the include statement for drm_plane_helper.h from all the files
that don't need it. Althogh the header file is almost empty, many drivers
include it somewhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
|
|/
|
|
|
|
|
|
| |
there is a repeated word "or" in comments, so remove it.
Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220718145536.4866-1-dengshaomin@cdjrlc.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.
Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After moving the vmalloc() call to another file, the rsp include
statement needs to be moved as well. Resolves a build warning on
parisc.
drivers/gpu/drm/mgag200/mgag200_g200.c: In function
'mgag200_g200_init_refclk':
drivers/gpu/drm/mgag200/mgag200_g200.c:120:16: error: implicit
declaration of function 'vmalloc'; did you mean 'kvmalloc'?
[-Werror=implicit-function-declaration]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 85397f6bc4ff ("drm/mgag200: Initialize each model in separate function")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/all/202206080734.ztAvDG7O-lkp@intel.com/
Link: https://patchwork.freedesktop.org/patch/msgid/20220608115122.7448-1-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
| |
The bits for accessing I2C data and clock channels varies among
models. Store them in the device-info structure for consumption
by the DDC code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-11-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
| |
Set new vidrst flag in device info for models that synchronize with
external sources (i.e., BMCs). In modesetting, set the corresponding
bits from the device-info flag.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-10-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The maximum resolution and memory bandwidth are model-specific limits.
Both are used during display-mode validation. Store the values in struct
mgag200_device_info and simplify the validation code.
v2:
* 'bandwith' -> 'bandwidth' in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-9-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
| |
Flag devices with broken handling of the startadd field in
struct mgag200_device_info, instead of PCI driver data. This
reduces the driver data to a simple type constant.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-8-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
| |
While currently empty, struct mgag200_device_info, will provide static,
constant information on each device model.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-7-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rework mgag200_regs_init() and mgag200_mm_init() into device preinit
and init functions. The preinit function, mgag200_device_preinit(),
requests and maps a device's I/O and video memory. The init function,
mgag200_device_init() initializes the state of struct mga_device.
Splitting the initialization between the two functions is necessary
to perform per-model operations between the two calls, such as reading
the unique revision ID on G200SEs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-6-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
| |
Call mgag200_device_probe_vram() from each model's initializer. The
G200EW3 uses a special helper with additional instructions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-5-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split the PCI code into a single call for each model. G200 and G200SE
each contain a dedicated helper with additional instructions. Noteably,
the G200ER has no code for PCI setup.
In a later patch, the magic numbers should be replaced by descriptive
constants.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-4-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a separate initializer function for each model. Add separate
devic structures for G200 and G200SE, which require additional
information.
Also move G200's and G200SE's helpers for reading the BIOS and
version id into model-specific code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-3-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove old test for 32-bit vs 16-bit colors. Prefer 24-bit color depth
on all devices. 32-bit color depth doesn't exist, it should have always
been 24-bit.
G200SE with less than 2 MiB of video memory have defaulted to 16-bit
color depth, as the original revision of the G200SE had only 1.75 MiB
of video memory. Using 16-bit colors enabled XGA resolution. But we
now already limit these devices to VGA resolutions as the memory-bandwith
test assumes 32-bit pixel size. So drop the special case from color-depth
selection.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601112522.5774-2-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split up the connector's mode_valid helper into a simple-pipe and a
mode-config helper. The simple-pipe helper tests for display-size
limits while the mode-config helper tests for memory-bandwidth limits.
Also add the mgag200_ prefix to mga_vga_calculate_mode_bandwidth() and
comment on the function's purpose.
The memory-bandwidth tests assume that the display uses 4 bytes per
pixel. The first models of G200SE-A only had 1.75 MiB of VRAM, which
limits these devices to 640x480-32.
v2:
* note the memory constraints on early G200SE-A
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-8-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Test for a mode's memory requirements in the device-wide mode_valid
helper. For simplicify, always assume a 32-bit color format. While
some rejected modes would work with less colors, implementing this
is probably not worth the effort.
Also remove the memory-related test from the connector's mode_valid
helper. The test uses the bpp value that users can specify on the
kernel's command line. This value is unrelated and the test would
belong into atomic_check.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-7-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
| |
struct mga_connector has outlived its purpose. Inline the rsp init
helper into the mode-config code and remove the data structure. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-6-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
| |
Store the I2C state within struct mga_device and switch I2C to
managed release. Simplifies the related code and lets us remove
mga_connector_destroy().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-5-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Provide drm_connector_helper_get_modes_from_ddc() to implement the
connector's get_modes callback. The new helper updates the connector
from DDC-provided EDID data.
v2:
* clear property if EDID is NULL in helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-4-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Initialization of the I2C adapter was allowed to fail. The mgag200
driver would have continued without DDC support. Had this happened in
practice, it would have led to segmentation faults in the connector
code. Resolve this problem by failing driver initialization on I2C-
related errors.
v2:
* initialize 'ret' before drm_err() (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-3-tzimmermann@suse.de
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DDC operation conflicts with concurrent mode setting. Acquire the
driver's I/O lock in get_modes to prevent this. This change should
have been part of commit 931e3f3a0e99 ("drm/mgag200: Protect
concurrent access to I/O registers with lock"), but apparently got
lost somewhere.
v3:
* fix commit message to say 'drm/mgag200' (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 931e3f3a0e99 ("drm/mgag200: Protect concurrent access to I/O registers with lock")
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-2-tzimmermann@suse.de
|