summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
Commit message (Collapse)AuthorAgeFilesLines
* i2c: slave-eeprom: Add read only modeBjörn Ardö2019-09-281-3/+11
| | | | | | | | Add read-only versions of all EEPROMs. These versions are read-only on the i2c side, but can be written from the sysfs side. Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i801: Bring back Block Process Call support for certain platformsJarkko Nikula2019-09-281-0/+1
| | | | | | | | | | | | | | | Commit b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond") looks like to drop by accident Block Write-Block Read Process Call support for Intel Sunrisepoint, Lewisburg, Denverton and Kaby Lake. That support was added for above and newer platforms by the commit 315cd67c9453 ("i2c: i801: Add Block Write-Block Read Process Call support") so bring it back for above platforms. Fixes: b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: riic: Clear NACK in tend isrChris Brandt2019-09-281-0/+1
| | | | | | | | | | | | | | | The NACKF flag should be cleared in INTRIICNAKI interrupt processing as description in HW manual. This issue shows up quickly when PREEMPT_RT is applied and a device is probed that is not plugged in (like a touchscreen controller). The result is endless interrupts that halt system boot. Fixes: 310c18a41450 ("i2c: riic: add driver") Cc: stable@vger.kernel.org Reported-by: Chien Nguyen <chien.nguyen.eb@rvc.renesas.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630Lee Jones2019-09-281-4/+8
| | | | | | | | | | | | | | | We have a production-level laptop (Lenovo Yoga C630) which is exhibiting a rather horrific bug. When I2C HID devices are being scanned for at boot-time the QCom Geni based I2C (Serial Engine) attempts to use DMA. When it does, the laptop reboots and the user never sees the OS. Attempts are being made to debug the reason for the spontaneous reboot. No luck so far, hence the requirement for this hot-fix. This workaround will be removed once we have a viable fix. Signed-off-by: Lee Jones <lee.jones@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-5.4' of ↵Linus Torvalds2019-09-2429-236/+726
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
| * i2c: tegra: Move suspend handling to NOIRQ phaseJon Hunter2019-09-131-18/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit acc8abcb2a9c ("i2c: tegra: Add suspend-resume support") added suspend support for the Tegra I2C driver and following this change on Tegra30 the following WARNING is seen on entering suspend ... WARNING: CPU: 2 PID: 689 at /dvs/git/dirty/git-master_l4t-upstream/kernel/drivers/i2c/i2c-core.h:54 __i2c_transfer+0x35c/0x70c i2c i2c-4: Transfer while suspended Modules linked in: brcmfmac brcmutil CPU: 2 PID: 689 Comm: rtcwake Not tainted 5.3.0-rc7-g089cf7f6ecb2 #1 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [<c0112264>] (unwind_backtrace) from [<c010ca94>] (show_stack+0x10/0x14) [<c010ca94>] (show_stack) from [<c0a77024>] (dump_stack+0xb4/0xc8) [<c0a77024>] (dump_stack) from [<c0124198>] (__warn+0xe0/0xf8) [<c0124198>] (__warn) from [<c01241f8>] (warn_slowpath_fmt+0x48/0x6c) [<c01241f8>] (warn_slowpath_fmt) from [<c06f6c40>] (__i2c_transfer+0x35c/0x70c) [<c06f6c40>] (__i2c_transfer) from [<c06f7048>] (i2c_transfer+0x58/0xf4) [<c06f7048>] (i2c_transfer) from [<c06f7130>] (i2c_transfer_buffer_flags+0x4c/0x70) [<c06f7130>] (i2c_transfer_buffer_flags) from [<c05bee78>] (regmap_i2c_write+0x14/0x30) [<c05bee78>] (regmap_i2c_write) from [<c05b9cac>] (_regmap_raw_write_impl+0x35c/0x868) [<c05b9cac>] (_regmap_raw_write_impl) from [<c05b984c>] (_regmap_update_bits+0xe4/0xec) [<c05b984c>] (_regmap_update_bits) from [<c05bad04>] (regmap_update_bits_base+0x50/0x74) [<c05bad04>] (regmap_update_bits_base) from [<c04d453c>] (regulator_disable_regmap+0x44/0x54) [<c04d453c>] (regulator_disable_regmap) from [<c04cf9d4>] (_regulator_do_disable+0xf8/0x268) [<c04cf9d4>] (_regulator_do_disable) from [<c04d1694>] (_regulator_disable+0xf4/0x19c) [<c04d1694>] (_regulator_disable) from [<c04d1770>] (regulator_disable+0x34/0x64) [<c04d1770>] (regulator_disable) from [<c04d2310>] (regulator_bulk_disable+0x28/0xb4) [<c04d2310>] (regulator_bulk_disable) from [<c0495cd4>] (tegra_pcie_power_off+0x64/0xa8) [<c0495cd4>] (tegra_pcie_power_off) from [<c0495f74>] (tegra_pcie_pm_suspend+0x25c/0x3f4) [<c0495f74>] (tegra_pcie_pm_suspend) from [<c05af48c>] (dpm_run_callback+0x38/0x1d4) [<c05af48c>] (dpm_run_callback) from [<c05afe30>] (__device_suspend_noirq+0xc0/0x2b8) [<c05afe30>] (__device_suspend_noirq) from [<c05b1c24>] (dpm_noirq_suspend_devices+0x100/0x37c) [<c05b1c24>] (dpm_noirq_suspend_devices) from [<c05b1ebc>] (dpm_suspend_noirq+0x1c/0x48) [<c05b1ebc>] (dpm_suspend_noirq) from [<c017d2c0>] (suspend_devices_and_enter+0x1d0/0xa00) [<c017d2c0>] (suspend_devices_and_enter) from [<c017dd10>] (pm_suspend+0x220/0x74c) [<c017dd10>] (pm_suspend) from [<c017c2c8>] (state_store+0x6c/0xc8) [<c017c2c8>] (state_store) from [<c02ef398>] (kernfs_fop_write+0xe8/0x1c4) [<c02ef398>] (kernfs_fop_write) from [<c0271e38>] (__vfs_write+0x2c/0x1c4) [<c0271e38>] (__vfs_write) from [<c02748dc>] (vfs_write+0xa4/0x184) [<c02748dc>] (vfs_write) from [<c0274b7c>] (ksys_write+0x9c/0xdc) [<c0274b7c>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xe9f21fa8 to 0xe9f21ff0) 1fa0: 0000006c 004b2438 00000004 004b2438 00000004 00000000 1fc0: 0000006c 004b2438 004b1228 00000004 00000004 00000004 0049e78c 004b1228 1fe0: 00000004 be9809b8 b6f0bc0b b6e96206 The problem is that the Tegra PCIe driver indirectly uses I2C for controlling some regulators and the I2C driver is now being suspended before the PCIe driver causing the PCIe suspend to fail. The Tegra PCIe driver is suspended during the NOIRQ phase and this cannot be changed due to other dependencies. Therefore, we also need to move the suspend handling for the Tegra I2C driver to the NOIRQ phase as well. In order to move the I2C suspend handling to the NOIRQ phase we also need to avoid calling pm_runtime_get/put() because per commit 1e2ef05bb8cf ("PM: Limit race conditions between runtime PM and system sleep (v2)") these cannot be called early in resume. The function tegra_i2c_init(), called during resume, calls pm_runtime_get/put() and so move these calls outside of tegra_i2c_init(), so this function can be used during the NOIRQ resume phase. Fixes: acc8abcb2a9c ("i2c: tegra: Add suspend-resume support") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: imx: ACPI support for NXP i2c controllerChuanhua Han2019-09-131-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable NXP i2c controller to boot with ACPI. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Udit Kumar <udit.kumar@nxp.com> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: uniphier(-f): remove all dev_dbg()Masahiro Yamada2019-09-052-36/+4
| | | | | | | | | | | | | | | | | | | | | | I have fixed various bugs, and these drivers are (I hope) pretty stable now. Remove all dev_dbg() for code clean-up. If I end up with debugging the drivers again, I will locally revert this commit. I no longer need the debug code in upstream. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: uniphier(-f): use devm_platform_ioremap_resource()Masahiro Yamada2019-09-052-6/+2
| | | | | | | | | | | | | | | | | | | | | | Replace the chain of platform_get_resource() and devm_ioremap_resource() with devm_platform_ioremap_resource(). This allows to remove the local variable for (struct resource *), and have one function call less. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: slave-eeprom: Add comment about address handlingBjörn Ardö2019-09-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | The behaviour of the EEPROM in the case where we only send an 8bit address to a 16bit address EEPROM is not defined. Added comment about that the slave-eeprom might behave differently from how an actual device does (only one model measured). Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: exynos5: Remove IRQF_ONESHOTSebastian Andrzej Siewior2019-09-041-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers sets IRQF_ONESHOT and passes only a primary handler. The IRQ is masked while the primary is handler is invoked independently of IRQF_ONESHOT. With IRQF_ONESHOT the core code will not force-thread the interrupt and this is probably not intended. I *assume* that the original author copied the IRQ registration from another driver which passed a primary and secondary handler and removed the secondary handler but keeping the ONESHOT flag. Remove IRQF_ONESHOT. Reported-by: Benjamin Rouxel <benjamin.rouxel@uva.nl> Tested-by: Benjamin Rouxel <benjamin.rouxel@uva.nl> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: stm32f7: Make structure stm32f7_i2c_algo constantNishka Dasgupta2019-09-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Static structure stm32f7_i2c_algo, of type i2c_algorithm, is used only when it is assigned to constant field algo of a variable having type i2c_adapter. As stm32f7_i2c_algo is therefore never modified, make it const as well to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: cht-wc: drop check because i2c_unregister_device() is NULL safeWolfram Sang2019-09-041-2/+1
| | | | | | | | | | | | | | | | | | No need to check the argument of i2c_unregister_device() because the function itself does it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c-eeprom_slave: Add support for more eeprom modelsBjörn Ardö2019-09-041-11/+25
| | | | | | | | | | | | | | | | Add a 32 and a 64 kbit memory. These needs 16 bit address so added support for that as well. Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: fsi: Add of_put_node() before breakNishka Dasgupta2019-09-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | Each iteration of for_each_available_childe_of_node puts the previous node, but in the case of a break from the middle of the loop, there is no put, thus causing a memory leak. Add an of_node_put before the break. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: synquacer: Make synquacer_i2c_ops constantNishka Dasgupta2019-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Static structure synquacer_i2c_ops, of type i2c_adapter, is only used when it is copied into a field of another structure. It is not itself modified. Hence make it const to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: hix5hd2: Remove IRQF_ONESHOTSebastian Andrzej Siewior2019-09-031-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers sets IRQF_ONESHOT and passes only a primary handler. The IRQ is masked while the primary is handler is invoked independently of IRQF_ONESHOT. With IRQF_ONESHOT the core code will not force-thread the interrupt and this is probably not intended. I *assume* that the original author copied the IRQ registration from another driver which passed a primary and secondary handler and removed the secondary handler but keeping the ONESHOT flag. Remove IRQF_ONESHOT. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyondMika Westerberg2019-09-031-54/+88
| | | | | | | | | | | | | | | | | | | | | | | | Intel Cannon Lake PCH moved the NO_REBOOT bit to reside as part of the TCO registers instead so update the i2c-i801 driver so that for Cannon Lake and beyond register platform device for iTCO using version 6. The affected PCHs are Cannon Lake, Cedar Fork, Comet Lake, Elkhart Lake and Ice Lake. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: iproc: Make bcm_iproc_i2c_quirks constantNishka Dasgupta2019-08-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Static structure bcm_iproc_i2c_quirks, of type i2c_adapter_quirks, is only used when being assigned to constant field quirks of a variable having type i2c_adapter. Hence make bcm_iproc_i2c_quirks constant as well to prevent it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: iproc: Add full name of devicetree node to adapter nameLori Hikichi2019-08-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the full name of the devicetree node to the adapter name. Without this change, all adapters have the same name making it difficult to distinguish between multiple instances. The most obvious way to see this is to use the utility i2c_detect. e.g. "i2c-detect -l" Before i2c-1 i2c Broadcom iProc I2C adapter I2C adapter i2c-0 i2c Broadcom iProc I2C adapter I2C adapter After i2c-1 i2c Broadcom iProc (i2c@e0000) I2C adapter i2c-0 i2c Broadcom iProc (i2c@b0000) I2C adapter Now it is easy to figure out which adapter maps to a which DT node. Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: piix4: Add ACPI supportJean Delvare2019-08-291-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the i2c-piix4 SMBus controller driver to enumerate I2C slave devices using ACPI. It builds on the related I2C mux device work in commit 8eb5c87a92c0 ("i2c: add ACPI support for I2C mux ports") In the i2c-piix4 driver the adapters are enumerated as: Main SMBus adapter Port 0, Port 2, ..., aux port (i.e., ASF adapter) However, in the AMD BKDG documentation[1], the implied order of ports is: Main SMBus adapter Port 0, ASF adapter, Port 2, Port 3, ... This ordering difference is unfortunate. We assume that ACPI developers will use the AMD documentation ordering, so we have to pass an extra parameter to piix4_add_adapter(). [1] 52740 BIOS and Kernel Developer's Guide (BKDG) for AMD Family 16h Models 30h-3Fh Processors Based on earlier work by Andrew Cooks. Reported-by: Andrew Cooks <andrew.cooks@opengear.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30hJean Delvare2019-08-291-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent bus timeouts and resets on Family 16h Model 30h by not probing reserved Ports 3 and 4. According to the AMD BIOS and Kernel Developer's Guides (BKDG), Port 3 and Port 4 are reserved on the following devices: - Family 15h Model 60h-6Fh - Family 15h Model 70h-7Fh - Family 16h Model 30h-3Fh Based on earlier work by Andrew Cooks. Reported-by: Andrew Cooks <andrew.cooks@opengear.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: ocores: use request_any_context_irq() to register IRQ handlerFederico Vaga2019-08-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c-ocores device is an HDL component that get instantiated in FPGA. The software stack used to drive an FPGA can be very different, and the i2c-ocore ip-core must work in different context. With respect to this patch the IRQ controller behind this device, and its driver, can have different implementations (nested threads). For this reason, it is safer to use `request_any_context_irq()` to avoid errors at probe time. Signed-off-by: Federico Vaga <federico.vaga@cern.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: designware: Fix optional reset error handlingAndy Shevchenko2019-08-291-10/+6
| | | | | | | | | | | | | | | | | | | | | | The commit bb475230b8e5 ("reset: make optional functions really optional") brought a missed part of the support for an optional reset handlers. Since that we don't need to have special error handling in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: designware: assert reset when error happen at ->probe()Andy Shevchenko2019-08-291-2/+4
| | | | | | | | | | | | | | | | | | | | | | The commit c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") introduced an optional clock while missed correct error handling. assert reset line back if error happen at ->probe(). Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: taos-evm: Make structure tsl2550_info constantNishka Dasgupta2019-08-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Static structure tsl2550_info, of type i2c_board_info, is referenced only twice: the first time in arguments to dev_info() (which does not modify it) and the second time as the last argument to function i2c_new_device() (where the corresponding parameter is declared as const). As tsl2550_info is therefore never modified, make it const to protect it from unintended modifications. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: designware-pci: Add support for Elkhart Lake PSE I2CJarkko Nikula2019-08-291-0/+18
| | | | | | | | | | | | | | | | | | | | Add support for Intel(R) Programmable Services Engine (Intel(R) PSE) I2C controller in Intel Elkhart Lake when interface is assigned to the host processor. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: designware-pci: Switch over to MSI interruptsFelipe Balbi2019-08-291-3/+14
| | | | | | | | | | | | | | | | | | Some devices support MSI interrupts. Let's at least try to use them in platforms that provide MSI capability. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: axxia: support slave modeAdamski, Krzysztof (Nokia - PL/Wroclaw)2019-08-292-8/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device contains both master and slave controllers which can be enabled simultaneously. Both controllers share the same SDA/SCL lines and interrupt source but has separate control and status registers. Controllers also works in loopback mode - slave device can communicate with its own master controller internally. The controller can handle up to two addresses, both of which may be 10 bit. Most of the logic (sending (N)ACK, handling repeated start or switching between write/read) is handled automatically which makes working with this controller quite easy. For simplicity, this patch adds basic support, limiting to only one slave address. Support for the 2nd device may be added in the future. Note that synchronize_irq() is used to ensure any running slave interrupt is finished to make sure slave i2c_client structure can be safely used by i2c_slave_event. Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: icy: Add LTC2990 present on 2019 board revisionMax Staudt2019-08-292-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the 2019 a1k.org community re-print of these PCBs sports an LTC2990 hwmon chip as an example use case, let this driver autoprobe for that as well. If it is present, modprobing ltc2990 is sufficient. The property_entry enables the three additional inputs available on this particular board: in1 will be the voltage of the 5V rail, divided by 2. in2 will be the voltage of the 12V rail, divided by 4. temp3 will be measured using a PCB loop next the chip. Signed-off-by: Max Staudt <max@enpas.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: Add i2c-icy for I2C on m68k/AmigaMax Staudt2019-08-293-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the i2c-icy driver for the ICY board for Amiga computers. It connects a PCF8584 I2C controller to the Zorro bus, providing I2C connectivity. The original documentation can be found on Aminet: https://aminet.net/package/docs/hard/icy IRQ support is currently not implemented, as i2c-algo-pcf is built for the ISA bus and a straight implementation of the same stack locks up a Zorro machine. Signed-off-by: Max Staudt <max@enpas.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [wsa: added a missing newline reported by checkpatch] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: bcm2835: Add full name of devicetree node to adapter nameStefan Wahren2019-08-291-1/+2
| | | | | | | | | | | | | | | | | | | | Inspired by Lori Hikichi's patch for iproc, this adds the full name of the devicetree node to the adapter name. With the introduction of BCM2711 it's very difficult to distinguish between the multiple instances. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: bcm2835: Avoid clk stretch quirk for BCM2711Stefan Wahren2019-08-291-3/+5
| | | | | | | | | | | | | | | | | | The I2C block on the BCM2711 isn't affected by the clk stretching bug. So there is no need to apply the corresponding quirk. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c-cht-wc: Fix lockdep warningHans de Goede2019-08-141-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the kernel is build with lockdep support and the i2c-cht-wc driver is used, the following warning is shown: [ 66.674334] ====================================================== [ 66.674337] WARNING: possible circular locking dependency detected [ 66.674340] 5.3.0-rc4+ #83 Not tainted [ 66.674342] ------------------------------------------------------ [ 66.674345] systemd-udevd/1232 is trying to acquire lock: [ 66.674349] 00000000a74dab07 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}, at: regmap_write+0x31/0x70 [ 66.674360] but task is already holding lock: [ 66.674362] 00000000d44a85b7 (i2c_register_adapter){+.+.}, at: i2c_smbus_xfer+0x49/0xf0 [ 66.674370] which lock already depends on the new lock. [ 66.674371] the existing dependency chain (in reverse order) is: [ 66.674374] -> #1 (i2c_register_adapter){+.+.}: [ 66.674381] rt_mutex_lock_nested+0x46/0x60 [ 66.674384] i2c_smbus_xfer+0x49/0xf0 [ 66.674387] i2c_smbus_read_byte_data+0x45/0x70 [ 66.674391] cht_wc_byte_reg_read+0x35/0x50 [ 66.674394] _regmap_read+0x63/0x1a0 [ 66.674396] _regmap_update_bits+0xa8/0xe0 [ 66.674399] regmap_update_bits_base+0x63/0xa0 [ 66.674403] regmap_irq_update_bits.isra.0+0x3b/0x50 [ 66.674406] regmap_add_irq_chip+0x592/0x7a0 [ 66.674409] devm_regmap_add_irq_chip+0x89/0xed [ 66.674412] cht_wc_probe+0x102/0x158 [ 66.674415] i2c_device_probe+0x95/0x250 [ 66.674419] really_probe+0xf3/0x380 [ 66.674422] driver_probe_device+0x59/0xd0 [ 66.674425] device_driver_attach+0x53/0x60 [ 66.674428] __driver_attach+0x92/0x150 [ 66.674431] bus_for_each_dev+0x7d/0xc0 [ 66.674434] bus_add_driver+0x14d/0x1f0 [ 66.674437] driver_register+0x6d/0xb0 [ 66.674440] i2c_register_driver+0x45/0x80 [ 66.674445] do_one_initcall+0x60/0x2f4 [ 66.674450] kernel_init_freeable+0x20d/0x2b4 [ 66.674453] kernel_init+0xa/0x10c [ 66.674457] ret_from_fork+0x3a/0x50 [ 66.674459] -> #0 (intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock){+.+.}: [ 66.674465] __lock_acquire+0xe07/0x1930 [ 66.674468] lock_acquire+0x9d/0x1a0 [ 66.674472] __mutex_lock+0xa8/0x9a0 [ 66.674474] regmap_write+0x31/0x70 [ 66.674480] cht_wc_i2c_adap_smbus_xfer+0x72/0x240 [i2c_cht_wc] [ 66.674483] __i2c_smbus_xfer+0x1a3/0x640 [ 66.674486] i2c_smbus_xfer+0x67/0xf0 [ 66.674489] i2c_smbus_read_byte_data+0x45/0x70 [ 66.674494] bq24190_probe+0x26b/0x410 [bq24190_charger] [ 66.674497] i2c_device_probe+0x189/0x250 [ 66.674500] really_probe+0xf3/0x380 [ 66.674503] driver_probe_device+0x59/0xd0 [ 66.674506] device_driver_attach+0x53/0x60 [ 66.674509] __driver_attach+0x92/0x150 [ 66.674512] bus_for_each_dev+0x7d/0xc0 [ 66.674515] bus_add_driver+0x14d/0x1f0 [ 66.674518] driver_register+0x6d/0xb0 [ 66.674521] i2c_register_driver+0x45/0x80 [ 66.674524] do_one_initcall+0x60/0x2f4 [ 66.674528] do_init_module+0x5c/0x230 [ 66.674531] load_module+0x2707/0x2a20 [ 66.674534] __do_sys_init_module+0x188/0x1b0 [ 66.674537] do_syscall_64+0x5c/0xb0 [ 66.674541] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 66.674543] other info that might help us debug this: [ 66.674545] Possible unsafe locking scenario: [ 66.674547] CPU0 CPU1 [ 66.674548] ---- ---- [ 66.674550] lock(i2c_register_adapter); [ 66.674553] lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock); [ 66.674556] lock(i2c_register_adapter); [ 66.674559] lock(intel_soc_pmic_chtwc:167:(&cht_wc_regmap_cfg)->lock); [ 66.674561] *** DEADLOCK *** The problem is that the CHT Whiskey Cove PMIC's builtin i2c-adapter is itself a part of an i2c-client (the PMIC). This means that transfers done through it take adapter->bus_lock twice, once for the parent i2c-adapter and once for its own bus_lock. Lockdep does not like this nested locking. To make lockdep happy in the case of busses with muxes, the i2c-core's i2c_adapter_lock_bus function calls: rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter)); But i2c_adapter_depth only works when the direct parent of the adapter is another adapter, as it is only meant for muxes. In this case there is an i2c-client and MFD instantiated platform_device in the parent->child chain between the 2 devices. This commit overrides the default i2c_lock_operations, passing a hardcoded depth of 1 to rt_mutex_lock_nested, making lockdep happy. Note that if there were to be a mux attached to the i2c-wc-cht adapter, this would break things again since the i2c-mux code expects the root-adapter to have a locking depth of 0. But the i2c-wc-cht adapter always has only 1 client directly attached in the form of the charger IC paired with the CHT Whiskey Cove PMIC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: replace i2c_new_secondary_device with an ERR_PTR variantWolfram Sang2019-08-141-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the general move to have i2c_new_*_device functions which return ERR_PTR instead of NULL, this patch converts i2c_new_secondary_device(). There are only few users, so this patch converts the I2C core and all users in one go. The function gets renamed to i2c_new_ancillary_device() so out-of-tree users will get a build failure to understand they need to adapt their error checking code. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> # adv748x Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # adv7511 + adv7604 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # adv7604 Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: sprd: Validate the return value of clock initializationBaolin Wang2019-08-061-4/+7
| | | | | | | | | | | | | | | | | | The 'enable' clock of I2C master is required, we should return an error if failed to get the 'enable' clock, to make sure the I2C driver can be defer probe if the clock resource is not ready. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: sprd: Change to use devm_platform_ioremap_resource()Baolin Wang2019-08-061-3/+1
| | | | | | | | | | | | | | | | Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: sprd: Make I2C driver can be built as a moduleBaolin Wang2019-08-062-6/+6
| | | | | | | | | | | | | | | | | | Now there is no need to keep our I2C driver to be initialized so early, thus changing to module level and let it can be built as a module, meanwhile adding some module information. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: Drop unneeded check for of_nodeAndy Shevchenko2019-08-061-6/+4
| | | | | | | | | | | | | | | | | | of_find_property() will return NULL if of_node is NULL, thus of_irq_get_by_name() returns -EINVAL which we ignore, so no need to double check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: designware: Fix unused variable warningShaokun Zhang2019-08-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | drivers/i2c/busses/i2c-designware-master.c: In function ‘i2c_dw_init_recovery_info’: drivers/i2c/busses/i2c-designware-master.c:658:6: warning: unused variable ‘r’ [-Wunused-variable] int r; ^ Fixes: 33eb09a02e8d ("i2c: designware: make use of devm_gpiod_get_optional") Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: designware: make use of devm_gpiod_get_optionalUwe Kleine-König2019-08-011-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | There is a semantical change: if devm_gpiod_get_optional returns -ENOSYS this is passed as error to the caller. This effectively reverts commit d1fa74520dcd ("i2c: designware: Consider SCL GPIO optional") which shouldn't be necessary any more since gpiod_get_optional doesn't return -ENOSYS any more with GPIOLIB=n. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: busses: Use dev_get_drvdata where possibleChuhong Yuan2019-08-012-6/+3
| | | | | | | | | | | | | | | | | | | | Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: imx-lpi2c: use devm_platform_ioremap_resource() to simplify codeAnson Huang2019-08-011-3/+1
| | | | | | | | | | | | | | | | | | | | Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: mxs: use devm_platform_ioremap_resource() to simplify codeAnson Huang2019-08-011-3/+1
| | | | | | | | | | | | | | | | | | | | Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: ismt: Remove call to memset after dmam_alloc_coherentFuqian Huang2019-08-011-2/+0
| | | | | | | | | | | | | | | | | | | | In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: tegra: Compile PM functions unconditionallyDmitry Osipenko2019-08-011-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C driver fails to probe if CONFIG_PM_SLEEP=n because runtime PM doesn't depend on the PM sleep and in this case the runtime PM ops are not included in the driver, resulting in I2C clock not being enabled. It's much cleaner to simply allow compiler to remove the dead code instead of messing with the #ifdefs. This patch fixes such errors when CONFIG_PM_SLEEP=n: tegra-i2c 7000c400.i2c: timeout waiting for fifo flush tegra-i2c 7000c400.i2c: Failed to initialize i2c controller Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds2019-09-192-3/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
| * | mfd / platform: cros_ec: Reorganize platform and mfd includesEnric Balletbo i Serra2019-09-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a bit of mess between cros-ec mfd includes and platform includes. For example, we have a linux/mfd/cros_ec.h include that exports the interface implemented in platform/chrome/cros_ec_proto.c. Or we have a linux/mfd/cros_ec_commands.h file that is non related to the multifunction device (in the sense that is not exporting any function of the mfd device). This causes crossed includes between mfd and platform/chrome subsystems and makes the code difficult to read, apart from creating 'curious' situations where a platform/chrome driver includes a linux/mfd/cros_ec.h file just to get the exported functions that are implemented in another platform/chrome driver. In order to have a better separation on what the cros-ec multifunction driver does and what the cros-ec core provides move and rework the affected includes doing: - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c driver from include/linux/mfd/cros_ec.h to a new file include/linux/platform_data/cros_ec_proto.h - Update all the drivers with the new includes, so - Drivers that only need to know about the protocol include - linux/platform_data/cros_ec_proto.h - linux/platform_data/cros_ec_commands.h - Drivers that need to know about the cros-ec mfd device also include - linux/mfd/cros_ec.h Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Series changes: 3 - Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp) Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | mfd / platform: cros_ec: Move cros-ec core driver out from MFDEnric Balletbo i Serra2019-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, the ChromeOS EC core driver has nothing related to an MFD device, so move that driver from the MFD subsystem to the platform/chrome subsystem. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | Merge tag 'driver-core-5.4-rc1' of ↵Linus Torvalds2019-09-181-1/+14
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here is the big driver core update for 5.4-rc1. There was a bit of a churn in here, with a number of core and OF platform patches being added to the tree, and then after much discussion and review and a day-long in-person meeting, they were decided to be reverted and a new set of patches is currently being reviewed on the mailing list. Other than that churn, there are two "persistent" branches in here that other trees will be pulling in as well during the merge window. One branch to add support for drivers to have the driver core automatically add sysfs attribute files when a driver is bound to a device so that the driver doesn't have to manually do it (and then clean it up, as it always gets it wrong). There's another branch in here for generic lookup helpers for the driver core that lots of busses are starting to use. That's the majority of the non-driver-core changes in this patch series. There's also some on-going debugfs file creation cleanup that has been slowly happening over the past few releases, with the goal to hopefully get that done sometime next year. All of these have been in linux-next for a while now with no reported issues" [ Note that the above-mentioned generic lookup helpers branch was already brought in by the LED merge (commit 4feaab05dc1e) that had shared it. Also note that that common branch introduced an i2c bug due to a bad conversion, which got fixed here. - Linus ] * tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits) coccinelle: platform_get_irq: Fix parse error driver-core: add include guard to linux/container.h sysfs: add BIN_ATTR_WO() macro driver core: platform: Export platform_get_irq_optional() hwmon: pwm-fan: Use platform_get_irq_optional() driver core: platform: Introduce platform_get_irq_optional() Revert "driver core: Add support for linking devices during device addition" Revert "driver core: Add edit_links() callback for drivers" Revert "of/platform: Add functional dependency link from DT bindings" Revert "driver core: Add sync_state driver/bus callback" Revert "of/platform: Pause/resume sync state during init and of_platform_populate()" Revert "of/platform: Create device links for all child-supplier depencencies" Revert "of/platform: Don't create device links for default busses" Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()" Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning" Revert "of/platform: Disable generic device linking code for PowerPC" devcoredump: fix typo in comment devcoredump: use memory_read_from_buffer of/platform: Disable generic device linking code for PowerPC device.h: Fix warnings for mismatched parameter names in comments ...