summaryrefslogtreecommitdiffstats
path: root/drivers/iio
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'iio-fixes-for-4.16a' of ↵Greg Kroah-Hartman2018-02-205-10/+15
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 4.16 cycle. One nasty very old crash around polling for buffers that aren't there - though that can only cause effects on drivers that support events but not buffers. * buffer / kfifo handling in the core. - Check there is a buffer and return 0 from poll directly if there isn't. Poll doesn't make sense in this circumstances, but best to close the hole. * ad5933 - Change the marked buffer mode to a software buffer as the meaning of the hardware buffer label has long since changed and this uses a front end software buffer anyway. * ad7192 - Fix the fact the external clock frequency was only set when using the internal clock which was less than helpful. * adis_lib - Initialize the trigger before requesting the interrupt. Some newer parts can power up with interrupt generation enabled so ordering now matters. * aspeed-adc - Fix an errror handling path as labels and general ordering were wrong. * srf08 - Fix a link error due to undefined devm_iio_triggered_buffer_setup. * stm32-adc - Fix error handling unwind squence in stm32h7_adc_enable.
| * iio: buffer: check if a buffer has been set up when poll is calledStefan Windfeldt-Prytz2018-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | If no iio buffer has been set up and poll is called return 0. Without this check there will be a null pointer dereference when calling poll on a iio driver without an iio buffer. Cc: stable@vger.kernel.org Signed-off-by: Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adis_lib: Initialize trigger before requesting interruptLars-Peter Clausen2018-02-171-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefinedAndreas Klinger2018-02-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Functions for triggered buffer support are needed by this module. If they are not defined accidentally by another driver, there's an error thrown out while linking. Add a select of IIO_BUFFER and IIO_TRIGGERED_BUFFER in the Kconfig file. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Fixes: a83195937151 ("iio: srf08: add triggered buffer support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: stm32: fix stm32h7_adc_enable error handlingFabrice Gasnier2018-01-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Error handling in stm32h7_adc_enable routine doesn't unwind enable sequence correctly. ADEN can only be cleared by hardware (e.g. by writing one to ADDIS). It's also better to clear ADRDY just after it's been set by hardware. Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: aspeed: Fix error handling pathChristophe JAILLET2018-01-141-3/+4
| | | | | | | | | | | | | | | | | | The labels and branching order of the error path of 'aspeed_adc_probe()' are broken. Re-order the labels and goto statements. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* | vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2018-02-113-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'staging-4.16-rc1' of ↵Linus Torvalds2018-02-0159-808/+2756
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big Staging and IIO driver patches for 4.16-rc1. There is the normal amount of new IIO drivers added, like all releases. The networking IPX and the ncpfs filesystem are moved into the staging tree, as they are on their way out of the kernel due to lack of use anymore. The visorbus subsystem finall has started moving out of the staging tree to the "real" part of the kernel, and the most and fsl-mc codebases are almost ready to move out, that will probably happen for 4.17-rc1 if all goes well. Other than that, there is a bunch of license header cleanups in the tree, along with the normal amount of coding style churn that we all know and love for this codebase. I also got frustrated at the Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting huge chunks of it that were never even being used. Full details of everything is in the shortlog. All of these patches have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits) staging: rtlwifi: remove redundant initialization of 'cfg_cmd' staging: rtl8723bs: remove a couple of redundant initializations staging: comedi: reformat lines to 80 chars or less staging: lustre: separate a connection destroy from free struct kib_conn Staging: rtl8723bs: Use !x instead of NULL comparison Staging: rtl8723bs: Remove dead code Staging: rtl8723bs: Change names to conform to the kernel code staging: ccree: Fix missing blank line after declaration staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd' staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST staging: fbtft: remove unused FB_TFT_SSD1325 kconfig staging: comedi: dt2811: remove redundant initialization of 'ns' staging: wilc1000: fix alignments to match open parenthesis staging: wilc1000: removed unnecessary defined enums typedef staging: wilc1000: remove unnecessary use of parentheses staging: rtl8192u: remove redundant initialization of 'timeout' staging: sm750fb: fix CamelCase for dispSet var staging: lustre: lnet/selftest: fix compile error on UP build staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons staging: rts5208: Fix "seg_no" calculation in reset_ms_card() ...
| * iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channelsNarcisa Ana Maria Vasile2018-01-081-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in_concentration_raw should report, according to sysfs-bus-iio documentation, a "Raw (unscaled no offset etc.) percentage reading of a substance." Modify scale to convert from ppm/ppb to percentage: 1 ppm = 0.0001% 1 ppb = 0.0000001% There is no offset needed to convert the ppm/ppb to percentage, so remove offset from IIO_CONCENTRATION (IIO_MOD_CO2) channel. Cc'd stable to reduce chance of userspace breakage in the long run as we fix this wrong bit of ABI usage. Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Cc: <Stable@vger.kernel.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * imu:adis16480: fix debugfs_simple_attr.cocci warningsVenkat Prashanth B U2018-01-081-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * gyro:adis16136: fix debugfs_simple_attr.cocci warningsVenkat Prashanth B U2018-01-081-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: imu: st_lsm6dsx: remove st_lsm6dsx_write_with_mask() declarationLorenzo Bianconi2018-01-081-2/+0
| | | | | | | | | | | | | | | | | | Remove st_lsm6dsx_write_with_mask() declaration since it has been removed in commit 6674bef628e6 ("iio: imu: st_lsm6dsx: add regmap API support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: imu: st_lsm6dsx: pre-allocate read buffer at bootstrapLorenzo Bianconi2018-01-083-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate device read buffer at bootstrap and do not put it on the stack since it is pretty big (~200B) and its size will increase adding support to device hw timestamp. Moreover this patch fixes following sparse warnings: drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:250:17: warning: Variable length array is used. drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:283:55: error: cannot size expression Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: stm32: fix scan of multiple channels with DMAFabrice Gasnier2018-01-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default, watermark is set to '1'. Watermark is used to fine tune cyclic dma buffer period. In case watermark is left untouched (e.g. 1) and several channels are being scanned, buffer period is wrongly set (e.g. to 1 sample). As a consequence, data is never pushed to upper layer. Fix buffer period size, by taking scan channels number into account. Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Drivers:iio:adc:ti_am335x_adc remove comparison to boolVenkat Prashanth B U2018-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | This is the patch to the file ti_am335x_adc.c which fixes the following coccinelle warning: WARNING: Comparison to bool Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: common: ssp_sensors: account for const type of of_device_id.dataJulia Lawall2018-01-082-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver creates a number of const structures that it stores in the data field of an of_device_id array. Add const to the declaration of the location that receives a value from the data field to ensure that the compiler will continue to check that the value is not modified and remove the const-dropping cast on the access to the data field. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: imu: st_lsm6dsx: add regmap API supportLorenzo Bianconi2018-01-086-211/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduce regmap API support to access to i2c/spi bus instead of using a custom support. Set max bulk read to (32 / SAMPLE_SIZE) * SAMPLE_SIZE since spi_write_then_read() used in regmap_spi indicates that is the max buffer length to use in order to avoid a kmalloc for each bus access. Remove lock mutex since concurrency is already managed by regmap API Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: imu: st_lsm6dsx: introduce conf_lock mutexLorenzo Bianconi2018-01-083-8/+21
| | | | | | | | | | | | | | | | | | Add conf_lock mutex to prevent concurrent FIFO configuration update Fixes: 290a6ce11d93 (iio: imu: add support to lsm6dsx driver) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: imu: st_lsm6dsx: fix endianness in st_lsm6dsx_read_oneshot()Lorenzo Bianconi2018-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | Apply le16_to_cpu() to data read from the sensor in order to take into account architecture endianness Fixes: 290a6ce11d93 (iio: imu: add support to lsm6dsx driver) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: humidity: hts221: move common code in hts221_coreLorenzo Bianconi2018-01-084-35/+22
| | | | | | | | | | | | | | | | Move duplicated i2c/spi probe code in hts221_probe() Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio:pressure:bmp280: Read calibration data in probeStefan Tatschner2018-01-081-71/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch affects BME280 and BMP280. The readout of the calibration data is moved to the probe function. Each sensor data access triggered reading the full calibration data before this patch. According to the datasheet, Section 4.4.2., the calibration data is stored in non-volatile memory. Since the calibration data does not change, and cannot be changed by the user, we can reduce bus traffic by reading the calibration data once. Additionally, proper organization of the data types enables removing some odd casts in the compensation formulas. Signed-off-by: Stefan Tatschner <stefan.tatschner@gmail.com> Tested-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Actually align the loop with the conversion ready flagStefan Brüns2018-01-081-19/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the registers are read out once per conversion interval. If the reading is delayed as the conversion has not yet finished, this extra time is treated as being part of the readout, although it should delay the start of the poll interval. This results in the interval starting slightly earlier in each iteration, until all time between reads is spent polling the status registers instead of sleeping. To fix this, the delay has to account for the state of the conversion ready flag. Whenever the conversion is already finished, schedule the next read on the regular interval, otherwise schedule it one interval after the flag bit has been set. Split the work function in two functions, one for the status poll and one for reading the values, to be able to note down the time when the flag bit is raised. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Align timestamp with conversion ready flagStefan Brüns2018-01-081-2/+2
| | | | | | | | | | | | | | | | | | As the timestamp is no longer (ab-)used to measure the function run time, it can be taken at the correct time, i.e. when the conversion has finished. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Use a monotonic clock for delay calculationStefan Brüns2018-01-081-14/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iio timestamp clock is user selectable and may be non-monotonic. Also, only part of the acquisition time is measured, thus the delay was longer than intended. Use a monotonic timestamp to track the time for the next poll iteration. The timestamp is advanced by the sampling interval each iteration. In case the conversion overrruns the register readout (i.e. fast sampling combined with a slow bus), one or multiple samples will be dropped. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Make calibration register value fixedMaciej Purski2018-01-081-31/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calibration register is used for calculating current register in hardware according to datasheet: current = shunt_volt * calib_register / 2048 (ina 226) current = shunt_volt * calib_register / 4096 (ina 219) Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in order to avoid truncation error and provide best precision allowed by shunt_voltage measurement. Make current scale value follow changes of shunt_resistor from sysfs as calib_register value is now fixed. Power_lsb value should also follow shunt_resistor changes as stated in datasheet: power_lsb = 25 * current_lsb (ina 226) power_lsb = 20 * current_lsb (ina 219) This is a part of the patchset: https://lkml.org/lkml/2017/11/22/394 Signed-off-by: Maciej Purski <m.purski@samsung.com> Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Drivers: iio:adc: fix brace coding style issue in at91_adc.cVenkat Prashanth B U2018-01-081-2/+2
| | | | | | | | | | | | | | | | | | This is a patch to the at91_adc.c file that fixes up a brace warning found by the checkpatch.pl tool Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: hx711: fix bug in reset functionalityAndreas Klinger2018-01-081-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return value in hx711_reset() should indicate status of dout otherwise the calling function is reporting an error as false positive If there are two reads too close to each other, then the second one will never succeed. This happens especially when using buffered mode with both channels enabled. When changing the channel on every trigger event the former 100 ms are not enough for waiting until the device indicates normal mode. Wait up to 1 second until the device turns into normal mode. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: hx711: add triggered buffer supportAndreas Klinger2018-01-082-23/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add buffer to device data struct and add trigger function Data format is quite simple: voltage - channel 0 32 Bit voltage - channel 1 32 Bit timestamp 64 Bit Using both channels at the same time is working quite slow because of changing the channel which needs a dummy read. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Do not udelay for several secondsStefan Brüns2018-01-081-3/+5
| | | | | | | | | | | | | | | | | | The conversion time can be up to 16 seconds (8 ms per channel, 2 channels, 1024 times averaging). Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flagStefan Brüns2018-01-081-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Although the datasheet states the CNVR flag is cleared by reading the BUS_VOLTAGE register, it is actually cleared by reading any of the voltage/current/power registers. The behaviour has been confirmed by TI support: http://e2e.ti.com/support/amplifiers/current-shunt-monitors/f/931/p/647053/2378282 Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Clarify size requirement for data bufferStefan Brüns2018-01-081-1/+2
| | | | | | | | | | | | | | | | | | | | The timestamp is inserted into the buffer after the sample data by iio_push_to_buffers_with_timestamp, document the space requirement for the timestamp. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: ina2xx: Remove bogus cast for data argumentStefan Brüns2018-01-081-2/+1
| | | | | | | | | | | | | | | | | | iio_push_to_buffers_with_timestamp expects a void pointer, so the cast is both unnecessary and misleading. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: meson-saradc: program the channel muxes during initializationMartin Blumenstingl2018-01-081-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some Meson8 devices the channel muxes are not programmed. This results in garbage values when trying to read channels that are not set up. Fix this by initializing the channel 0 and 1 muxes in MESON_SAR_ADC_CHAN_10_SW as well as the muxes for all other channels in MESON_SAR_ADC_AUX_SW based on what the vendor driver does (which is simply a 1:1 mapping of channel number and channel mux). This only showed up on Meson8 devices, because for GXBB and newer BL30 is taking care of initializing the channel muxes. This additionally fixes a typo in the MESON_SAR_ADC_AUX_SW_MUX_SEL_CHAN_MASK macro because the old definition assumed that the register fields were 2 bit wide, while they are actually 3 bit wide. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: adc: meson-saradc: fix the clock frequency on Meson8 and Meson8bMartin Blumenstingl2018-01-081-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GX SoCs use a 1.2 MHz ADC clock, while the older SoCs use a 1.14 MHz clock. A comment in the driver from Amlogic's GPL kernel says that it's running at 1.28 MHz. However, it's actually programming a divider of 20 + 1. With a XTAL clock of 24 MHz this results in a frequency of 1.14 MHz. (their calculation might be based on a 27 MHz XTAL clock, but this is not what we have on the Meson8 and Meson8b SoCs). The ADC was still working with the 1.2MHz clock. In my own tests I did not see a difference between 1.2 and 1.14 MHz (regardless of the clock frequency used, the ADC results were identical). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * drivers: iio: gyro: remove duplicate includesPravin Shedge2018-01-081-1/+0
| | | | | | | | | | | | | | | | | | These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: dac: mcp4725: Remove unneeded conversions to boolAndrew F. Davis2018-01-081-1/+1
| | | | | | | | | | | | | | | | Found with scripts/coccinelle/misc/boolconv.cocci. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: stm32: Adopt SPDX identifierBenjamin Gaignard2018-01-089-85/+9
| | | | | | | | | | | | | | | | | | | | Add SPDX identifier in stm32's files in IIO directory Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: light: make a couple of config structures staticColin Ian King2018-01-082-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Structures st_uvis25_i2c_regmap_config and st_uvis25_spi_regmap_config are local to the source and do not need to be in global scope, so make them both static. Cleans up sparse warnings: warning: symbol 'st_uvis25_i2c_regmap_config' was not declared. Should it be static? warning: symbol 'st_uvis25_spi_regmap_config' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: buffer: Expose data availableMatt Fornero2018-01-081-0/+15
| | | | | | | | | | | | | | | | | | | | Add a sysfs attribute that exposes buffer data available to userspace. This attribute can be checked at runtime to determine the overall buffer fill level (across all allocated buffers). Signed-off-by: Matt Fornero <matt.fornero@mathworks.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: mma8452: replace license description with SPDX specifierMartin Kepplinger2018-01-081-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | This replaces the custom license information text with the appropriate SPDX identifier. While the information here stays the same, it is easier to read. Signed-off-by: Martin Kepplinger <martink@posteo.de> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by: Harinath Nampally <harinath922@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: common: ssp_sensors: use ktime_get_real_ns() timestampsArnd Bergmann2018-01-081-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | getnstimeofday() suffers from the overflow in y2038 on 32-bit architectures and requires a conversion into the nanosecond format that we want here. This changes ssp_parse_dataframe() to use ktime_get_real_ns() directly, which does not have that problem. An open question is what time base should be used here. Normally timestamps should use ktime_get_ns() or ktime_get_boot_ns() to read monotonic time instead of "real" time, which suffers from time jumps due to settimeofday() calls or leap seconds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: dummy_evgen: modify the return value check for irq_sim_init()Bartosz Golaszewski2018-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | As discussed with Marc Zyngier: irq_sim_init() and its devres variant should return the base of the allocated interrupt range on success rather than 0. This will be modified later - first, change the way users handle the return value of these routines. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge Linus's staging merge point into staging-nextGreg Kroah-Hartman2017-12-065-14/+55
| |\ | | | | | | | | | | | | | | | | | | | | | This resolves the merge issue pointed out by Stephen in drivers/iio/adc/meson_saradc.c. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | iio: Add macro to populate struct iio_map arrayLukas Wunner2017-12-021-14/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPIO core provides a handy GPIO_LOOKUP() macro to populate a struct gpiod_lookup array without having to spell out attribute names (but still avoid breakage when attributes within the struct are rearranged or added). The axp288_adc.c driver uses a similar macro to populate a struct iio_map array. Make it available to others. Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: accel: bmc150: Add OF device ID tableJavier Martinez Canillas2017-12-021-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. The I2C device ID table entries have the .driver_data field set, but they are not used in the driver so weren't set in the OF device table entries. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: adc: meson-saradc: remove irrelevant clock "sana"Xingyu Chen2017-12-021-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "sana" clock is not used at SAR ADC module in Amlogic Meson SoC, it is irrelevant for the SAR ADC. Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: accel: st_accel: remove redundant pointer pdataColin Ian King2017-12-021-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pointer pdata is being assigned but it is never being used, hence it is redundant and can be removed. Cleans up clang warning: drivers/iio/accel/st_accel_core.c:952:3: warning: Value stored to 'pdata' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio:accel:da280: Linx 820 Windows tablet has a da280 mapped via ACPILuke Ross2017-12-021-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | This adds an ACPI table to the driver and the ACPI ID of the sensor on the tablet. Signed-off-by: Luke Ross <luke@lukeross.name> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: light: add support for UVIS25 sensorLorenzo Bianconi2017-12-026-0/+560
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for STMicroelectronics UVIS25 uv sensor http://www.st.com/resource/en/datasheet/uvis25.pdf - continuos mode support - i2c support - spi support - trigger mode support - system PM support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: adc: aspeed: Deassert reset in probeJoel Stanley2017-12-021-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASPEED SoC must deassert a reset in order to use the ADC peripheral. The device tree bindings are updated to document the resets phandle, and the example is updated to match what is expected for both the reset and clock phandle. Note that the bindings should have always had the reset controller, as the hardware is unusable without it. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 15:05:56 +0000