summaryrefslogtreecommitdiffstats
path: root/drivers/md
Commit message (Collapse)AuthorAgeFilesLines
...
* md-cluster: fix wild pointer of unlock_all_bitmaps()Zhao Heming2020-08-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 60f80d6f2d07a6d8aee485a1d1252327eeee0c81 ] reproduction steps: ``` node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb node2 # mdadm -A /dev/md0 /dev/sda /dev/sdb node1 # mdadm -G /dev/md0 -b none mdadm: failed to remove clustered bitmap. node1 # mdadm -S --scan ^C <==== mdadm hung & kernel crash ``` kernel stack: ``` [ 335.230657] general protection fault: 0000 [#1] SMP NOPTI [...] [ 335.230848] Call Trace: [ 335.230873] ? unlock_all_bitmaps+0x5/0x70 [md_cluster] [ 335.230886] unlock_all_bitmaps+0x3d/0x70 [md_cluster] [ 335.230899] leave+0x10f/0x190 [md_cluster] [ 335.230932] ? md_super_wait+0x93/0xa0 [md_mod] [ 335.230947] ? leave+0x5/0x190 [md_cluster] [ 335.230973] md_cluster_stop+0x1a/0x30 [md_mod] [ 335.230999] md_bitmap_free+0x142/0x150 [md_mod] [ 335.231013] ? _cond_resched+0x15/0x40 [ 335.231025] ? mutex_lock+0xe/0x30 [ 335.231056] __md_stop+0x1c/0xa0 [md_mod] [ 335.231083] do_md_stop+0x160/0x580 [md_mod] [ 335.231119] ? 0xffffffffc05fb078 [ 335.231148] md_ioctl+0xa04/0x1930 [md_mod] [ 335.231165] ? filename_lookup+0xf2/0x190 [ 335.231179] blkdev_ioctl+0x93c/0xa10 [ 335.231205] ? _cond_resched+0x15/0x40 [ 335.231214] ? __check_object_size+0xd4/0x1a0 [ 335.231224] block_ioctl+0x39/0x40 [ 335.231243] do_vfs_ioctl+0xa0/0x680 [ 335.231253] ksys_ioctl+0x70/0x80 [ 335.231261] __x64_sys_ioctl+0x16/0x20 [ 335.231271] do_syscall_64+0x65/0x1f0 [ 335.231278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ``` Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm: use noio when sending kobject eventMikulas Patocka2020-07-221-3/+12
| | | | | | | | | | | | | | | | | | | | commit 6958c1c640af8c3f40fa8a2eee3b5b905d95b677 upstream. kobject_uevent may allocate memory and it may be called while there are dm devices suspended. The allocation may recurse into a suspended device, causing a deadlock. We must set the noio flag when sending a uevent. The observed deadlock was reported here: https://www.redhat.com/archives/dm-devel/2020-March/msg00025.html Reported-by: Khazhismel Kumykov <khazhy@google.com> Reported-by: Tahsin Erdogan <tahsin@google.com> Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm zoned: assign max_io_len correctlyHou Tao2020-07-091-1/+1
| | | | | | | | | | | | | | | | commit 7b2377486767503d47265e4d487a63c651f6b55d upstream. The unit of max_io_len is sector instead of byte (spotted through code review), so fix it. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md: add feature flag MD_FEATURE_RAID0_LAYOUTNeilBrown2020-06-252-0/+16
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 33f2c35a54dfd75ad0e7e86918dcbe4de799a56c ] Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bcache: fix potential deadlock problem in btree_gc_coalesceZhiqiang Liu2020-06-251-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit be23e837333a914df3f24bf0b32e87b0331ab8d1 ] coccicheck reports: drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417 In btree_gc_coalesce func, if the coalescing process fails, we will goto to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock. Then, it will cause a deadlock when trying to acquire new_nodes[i]-> write_lock for freeing new_nodes[i] before return. btree_gc_coalesce func details as follows: if alloc new_nodes[i] fails: goto out_nocoalesce; // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock) // main coalescing process for (i = nodes - 1; i > 0; --i) [snipped] if coalescing process fails: // Here, directly goto out_nocoalesce // tag will cause a deadlock goto out_nocoalesce; [snipped] // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock) // coalesing succ, return return; out_nocoalesce: btree_node_free(new_nodes[i]) // free new_nodes[i] // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock); // set flag for reuse clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags); // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock); To fix the problem, we add a new tag 'out_unlock_nocoalesce' for releasing new_nodes[i]->write_lock before out_nocoalesce tag. If coalescing process fails, we will go to out_unlock_nocoalesce tag for releasing new_nodes[i]->write_lock before free new_nodes[i] in out_nocoalesce tag. (Coly Li helps to clean up commit log format.) Fixes: 2a285686c109816 ("bcache: btree locking rework") Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm zoned: return NULL if dmz_get_zone_for_reclaim() fails to find a zoneHannes Reinecke2020-06-252-4/+4
| | | | | | | | | | | | | | [ Upstream commit 489dc0f06a5837f87482c0ce61d830d24e17082e ] The only case where dmz_get_zone_for_reclaim() cannot return a zone is if the respective lists are empty. So we should just return a simple NULL value here as we really don't have an error code which would make sense. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm mpath: switch paths in dm_blk_ioctl() code pathMartin Wilck2020-06-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2361ae595352dec015d14292f1b539242d8446d6 ] SCSI LUN passthrough code such as qemu's "scsi-block" device model pass every IO to the host via SG_IO ioctls. Currently, dm-multipath calls choose_pgpath() only in the block IO code path, not in the ioctl code path (unless current_pgpath is NULL). This has the effect that no path switching and thus no load balancing is done for SCSI-passthrough IO, unless the active path fails. Fix this by using the same logic in multipath_prepare_ioctl() as in multipath_clone_and_map(). Note: The allegedly best path selection algorithm, service-time, still wouldn't work perfectly, because the io size of the current request is always set to 0. Changing that for the IO passthrough case would require the ioctl cmd and arg to be passed to dm's prepare_ioctl() method. Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm crypt: avoid truncating the logical block sizeEric Biggers2020-06-201-1/+1
| | | | | | | | | | | | | | | | commit 64611a15ca9da91ff532982429c44686f4593b5f upstream. queue_limits::logical_block_size got changed from unsigned short to unsigned int, but it was forgotten to update crypt_io_hints() to use the new type. Fix it. Fixes: ad6bf88a6c19 ("block: fix an integer overflow in logical block size") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md: don't flush workqueue unconditionally in md_openGuoqing Jiang2020-06-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f6766ff6afff70e2aaf39e1511e16d471de7c3ae ] We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue. kernel: [ 154.522645] ====================================================== kernel: [ 154.522647] WARNING: possible circular locking dependency detected kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O kernel: [ 154.522651] ------------------------------------------------------ kernel: [ 154.522653] mdadm/2482 is trying to acquire lock: kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0 kernel: [ 154.522673] kernel: [ 154.522673] but task is already holding lock: kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522691] kernel: [ 154.522691] which lock already depends on the new lock. kernel: [ 154.522691] kernel: [ 154.522694] kernel: [ 154.522694] the existing dependency chain (in reverse order) is: kernel: [ 154.522696] kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}: kernel: [ 154.522704] __mutex_lock+0x87/0x950 kernel: [ 154.522706] __blkdev_get+0x79/0x590 kernel: [ 154.522708] blkdev_get+0x65/0x140 kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40 kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod] kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod] kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod] kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522735] vfs_write+0xad/0x1a0 kernel: [ 154.522737] ksys_write+0xa4/0xe0 kernel: [ 154.522745] do_syscall_64+0x64/0x2b0 kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522749] kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}: kernel: [ 154.522752] __mutex_lock+0x87/0x950 kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod] kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522763] vfs_write+0xad/0x1a0 kernel: [ 154.522765] ksys_write+0xa4/0xe0 kernel: [ 154.522767] do_syscall_64+0x64/0x2b0 kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522770] kernel: [ 154.522770] -> #2 (kn->count#253){++++}: kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0 kernel: [ 154.522778] kernfs_remove+0x1f/0x30 kernel: [ 154.522780] kobject_del+0x28/0x60 kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod] kernel: [ 154.522786] process_one_work+0x2a7/0x5f0 kernel: [ 154.522788] worker_thread+0x2d/0x3d0 kernel: [ 154.522793] kthread+0x117/0x130 kernel: [ 154.522795] ret_from_fork+0x3a/0x50 kernel: [ 154.522796] kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}: kernel: [ 154.522800] process_one_work+0x27e/0x5f0 kernel: [ 154.522802] worker_thread+0x2d/0x3d0 kernel: [ 154.522804] kthread+0x117/0x130 kernel: [ 154.522806] ret_from_fork+0x3a/0x50 kernel: [ 154.522807] kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}: kernel: [ 154.522813] __lock_acquire+0x1392/0x1690 kernel: [ 154.522816] lock_acquire+0xb4/0x1a0 kernel: [ 154.522818] flush_workqueue+0xab/0x4b0 kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522823] __blkdev_get+0xea/0x590 kernel: [ 154.522825] blkdev_get+0x65/0x140 kernel: [ 154.522828] do_dentry_open+0x1d1/0x380 kernel: [ 154.522831] path_openat+0x567/0xcc0 kernel: [ 154.522834] do_filp_open+0x9b/0x110 kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522838] do_sys_open+0x57/0x80 kernel: [ 154.522840] do_syscall_64+0x64/0x2b0 kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522844] kernel: [ 154.522844] other info that might help us debug this: kernel: [ 154.522844] kernel: [ 154.522846] Chain exists of: kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex kernel: [ 154.522846] kernel: [ 154.522850] Possible unsafe locking scenario: kernel: [ 154.522850] kernel: [ 154.522852] CPU0 CPU1 kernel: [ 154.522853] ---- ---- kernel: [ 154.522854] lock(&bdev->bd_mutex); kernel: [ 154.522856] lock(&mddev->reconfig_mutex); kernel: [ 154.522858] lock(&bdev->bd_mutex); kernel: [ 154.522860] lock((wq_completion)md_misc); kernel: [ 154.522861] kernel: [ 154.522861] *** DEADLOCK *** kernel: [ 154.522861] kernel: [ 154.522864] 1 lock held by mdadm/2482: kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522868] kernel: [ 154.522868] stack backtrace: kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25 kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 kernel: [ 154.522878] Call Trace: kernel: [ 154.522881] dump_stack+0x8f/0xcb kernel: [ 154.522884] check_noncircular+0x194/0x1b0 kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690 kernel: [ 154.522890] __lock_acquire+0x1392/0x1690 kernel: [ 154.522893] lock_acquire+0xb4/0x1a0 kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522898] flush_workqueue+0xab/0x4b0 kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522910] __blkdev_get+0xea/0x590 kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522914] blkdev_get+0x65/0x140 kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522918] do_dentry_open+0x1d1/0x380 kernel: [ 154.522921] path_openat+0x567/0xcc0 kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690 kernel: [ 154.522926] do_filp_open+0x9b/0x110 kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0 kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630 kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0 kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522944] do_sys_open+0x57/0x80 kernel: [ 154.522946] do_syscall_64+0x64/0x2b0 kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm verity fec: fix hash block number in verity_fec_decodeSunwook Eom2020-05-051-1/+1
| | | | | | | | | | | | | | | | commit ad4e80a639fc61d5ecebb03caa5cdbfb91fcebfc upstream. The error correction data is computed as if data and hash blocks were concatenated. But hash block number starts from v->hash_start. So, we have to calculate hash block number based on that. Fixes: a739ff3f543af ("dm verity: add support for forward error correction") Cc: stable@vger.kernel.org Signed-off-by: Sunwook Eom <speed.eom@samsung.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm flakey: check for null arg_name in parse_features()Goldwyn Rodrigues2020-04-241-0/+5
| | | | | | | | | | | | | | [ Upstream commit 7690e25302dc7d0cd42b349e746fe44b44a94f2b ] One can crash dm-flakey by specifying more feature arguments than the number of features supplied. Checking for null in arg_name avoids this. dmsetup create flakey-test --table "0 66076080 flakey /dev/sdb9 0 0 180 2 drop_writes" Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone()Bob Liu2020-04-241-1/+0
| | | | | | | | | | | | | | | | | | [ Upstream commit b8fdd090376a7a46d17db316638fe54b965c2fb0 ] zmd->nr_rnd_zones was increased twice by mistake. The other place it is increased in dmz_init_zone() is the only one needed: 1131 zmd->nr_useable_zones++; 1132 if (dmz_is_rnd(zone)) { 1133 zmd->nr_rnd_zones++; ^^^ Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm verity fec: fix memory leak in verity_fec_dtrShetty, Harshini X (EXT-Sony Mobile)2020-04-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 75fa601934fda23d2f15bf44b09c2401942d8e15 upstream. Fix below kmemleak detected in verity_fec_ctr. output_pool is allocated for each dm-verity-fec device. But it is not freed when dm-table for the verity target is removed. Hence free the output mempool in destructor function verity_fec_dtr. unreferenced object 0xffffffffa574d000 (size 4096): comm "init", pid 1667, jiffies 4294894890 (age 307.168s) hex dump (first 32 bytes): 8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00 .6..f........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000060e82407>] __kmalloc+0x2b4/0x340 [<00000000dd99488f>] mempool_kmalloc+0x18/0x20 [<000000002560172b>] mempool_init_node+0x98/0x118 [<000000006c3574d2>] mempool_init+0x14/0x20 [<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0 [<000000000887261b>] verity_ctr+0x87c/0x8d0 [<000000002b1e1c62>] dm_table_add_target+0x174/0x348 [<000000002ad89eda>] table_load+0xe4/0x328 [<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0 [<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928 [<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98 [<000000005361e2e8>] el0_svc_common+0xa0/0x158 [<000000001374818f>] el0_svc_handler+0x6c/0x88 [<000000003364e9f4>] el0_svc+0x8/0xc [<000000009d84cec9>] 0xffffffffffffffff Fixes: a739ff3f543af ("dm verity: add support for forward error correction") Depends-on: 6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()") Cc: stable@vger.kernel.org Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm bio record: save/restore bi_end_io and bi_integrityMike Snitzer2020-04-021-0/+15
| | | | | | | | | | | [ Upstream commit 1b17159e52bb31f982f82a6278acd7fab1d3f67b ] Also, save/restore __bi_remaining in case the bio was used in a BIO_CHAIN (e.g. due to blk_queue_split). Suggested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm integrity: fix a deadlock due to offloading to an incorrect workqueueMikulas Patocka2020-03-111-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 53770f0ec5fd417429775ba006bc4abe14002335 upstream. If we need to perform synchronous I/O in dm_integrity_map_continue(), we must make sure that we are not in the map function - in order to avoid the deadlock due to bio queuing in generic_make_request. To avoid the deadlock, we offload the request to metadata_wq. However, metadata_wq also processes metadata updates for write requests. If there are too many requests that get offloaded to metadata_wq at the beginning of dm_integrity_map_continue, the workqueue metadata_wq becomes clogged and the system is incapable of processing any metadata updates. This causes a deadlock because all the requests that need to do metadata updates wait for metadata_wq to proceed and metadata_wq waits inside wait_and_add_new_range until some existing request releases its range lock (which doesn't happen because the range lock is released after metadata update). In order to fix the deadlock, we create a new workqueue offload_wq and offload requests to it - so that processing of offload_wq is independent from processing of metadata_wq. Fixes: 7eada909bfd7 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Tested-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm cache: fix a crash due to incorrect work item cancellingMikulas Patocka2020-03-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7cdf6a0aae1cccf5167f3f04ecddcf648b78e289 upstream. The crash can be reproduced by running the lvm2 testsuite test lvconvert-thin-external-cache.sh for several minutes, e.g.: while :; do make check T=shell/lvconvert-thin-external-cache.sh; done The crash happens in this call chain: do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset -> memset -> __memset -- which accesses an invalid pointer in the vmalloc area. The work entry on the workqueue is executed even after the bitmap was freed. The problem is that cancel_delayed_work doesn't wait for the running work item to finish, so the work item can continue running and re-submitting itself even after cache_postsuspend. In order to make sure that the work item won't be running, we must use cancel_delayed_work_sync. Also, change flush_workqueue to drain_workqueue, so that if some work item submits itself or another work item, we are properly waiting for both of them. Fixes: c6b4fcbad044 ("dm: add cache target") Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bcache: explicity type cast in bset_bkey_last()Coly Li2020-02-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7c02b0055f774ed9afb6e1c7724f33bf148ffdc0 ] In bset.h, macro bset_bkey_last() is defined as, bkey_idx((struct bkey *) (i)->d, (i)->keys) Parameter i can be variable type of data structure, the macro always works once the type of struct i has member 'd' and 'keys'. bset_bkey_last() is also used in macro csum_set() to calculate the checksum of a on-disk data structure. When csum_set() is used to calculate checksum of on-disk bcache super block, the parameter 'i' data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in struct cache_sb) the member keys is __u16 type. But bkey_idx() expects unsigned int (a 32bit width), so there is problem when sending parameters via stack to call bkey_idx(). Sparse tool from Intel 0day kbuild system reports this incompatible problem. bkey_idx() is part of user space API, so the simplest fix is to cast the (i)->keys to unsigned int type in macro bset_bkey_last(). Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm: fix potential for q->make_request_fn NULL pointerMike Snitzer2020-02-141-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 47ace7e012b9f7ad71d43ac9063d335ea3d6820b upstream. Move blk_queue_make_request() to dm.c:alloc_dev() so that q->make_request_fn is never NULL during the lifetime of a DM device (even one that is created without a DM table). Otherwise generic_make_request() will crash simply by doing: dmsetup create -n test mount /dev/dm-N /mnt While at it, move ->congested_data initialization out of dm.c:alloc_dev() and into the bio-based specific init method. Reported-by: Stefan Bader <stefan.bader@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1860231 Fixes: ff36ab34583a ("dm: remove request-based logic from make_request_fn wrapper") Depends-on: c12c9a3c3860c ("dm: various cleanups to md->queue initialization code") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> [smb: adjusted for context and dm_init_md_queue() exitsting in older kernels] Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm crypt: fix benbi IV constructor crash if used in authenticated modeMilan Broz2020-02-141-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4ea9471fbd1addb25a4d269991dc724e200ca5b5 upstream. If benbi IV is used in AEAD construction, for example: cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256 the constructor uses wrong skcipher function and crashes: BUG: kernel NULL pointer dereference, address: 00000014 ... EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt] Call Trace: ? crypt_subkey_size+0x20/0x20 [dm_crypt] crypt_ctr+0x567/0xfc0 [dm_crypt] dm_table_add_target+0x15f/0x340 [dm_mod] Fix this by properly using crypt_aead_blocksize() in this case. Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # v4.12+ Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051 Reported-by: Jerad Simpson <jbsimpson@gmail.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm space map common: fix to ensure new block isn't already in useJoe Thornber2020-02-144-3/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4feaef830de7ffdd8352e1fe14ad3bf13c9688f8 upstream. The space-maps track the reference counts for disk blocks allocated by both the thin-provisioning and cache targets. There are variants for tracking metadata blocks and data blocks. Transactionality is implemented by never touching blocks from the previous transaction, so we can rollback in the event of a crash. When allocating a new block we need to ensure the block is free (has reference count of 0) in both the current and previous transaction. Prior to this fix we were doing this by searching for a free block in the previous transaction, and relying on a 'begin' counter to track where the last allocation in the current transaction was. This 'begin' field was not being updated in all code paths (eg, increment of a data block reference count due to breaking sharing of a neighbour block in the same btree leaf). This fix keeps the 'begin' field, but now it's just a hint to speed up the search. Instead the current transaction is searched for a free block, and then the old transaction is double checked to ensure it's free. Much simpler. This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when DM thin-provisioning's snapshots are heavily used. Reported-by: Eric Wheeler <dm-devel@lists.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm zoned: support zone sizes smaller than 128MiBDmitry Fomichev2020-02-141-9/+14
| | | | | | | | | | | | | | | | | | | | | | | commit b39962950339912978484cdac50069258545d753 upstream. dm-zoned is observed to log failed kernel assertions and not work correctly when operating against a device with a zone size smaller than 128MiB (e.g. 32768 bits per 4K block). The reason is that the bitmap size per zone is calculated as zero with such a small zone size. Fix this problem and also make the code related to zone bitmap management be able to handle per zone bitmaps smaller than a single block. A dm-zoned-tools patch is required to properly format dm-zoned devices with zone sizes smaller than 128MiB. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md: Avoid namespace collision with bitmap APIAndy Shevchenko2020-01-293-9/+9
| | | | | | | | | | | | | | | | | | commit e64e4018d572710c44f42c923d4ac059f0a23320 upstream. bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [only take the bitmap_free change for stable - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* block: fix an integer overflow in logical block sizeMikulas Patocka2020-01-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit ad6bf88a6c19a39fb3b0045d78ea880325dfcf15 upstream. Logical block size has type unsigned short. That means that it can be at most 32768. However, there are architectures that can run with 64k pages (for example arm64) and on these architectures, it may be possible to create block devices with 64k block size. For exmaple (run this on an architecture with 64k pages): Mount will fail with this error because it tries to read the superblock using 2-sector access: device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536 EXT4-fs (dm-0): unable to read superblock This patch changes the logical block size from unsigned short to unsigned int to avoid the overflow. Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md: raid1: check rdev before reference in raid1_sync_request funcZhiqiang Liu2020-01-091-1/+1
| | | | | | | | | | [ Upstream commit 028288df635f5a9addd48ac4677b720192747944 ] In raid1_sync_request func, rdev should be checked before reference. Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bcache: at least try to shrink 1 node in bch_mca_scan()Coly Li2020-01-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 9fcc34b1a6dd4b8e5337e2b6ef45e428897eca6b ] In bch_mca_scan(), the number of shrinking btree node is calculated by code like this, unsigned long nr = sc->nr_to_scan; nr /= c->btree_pages; nr = min_t(unsigned long, nr, mca_can_free(c)); variable sc->nr_to_scan is number of objects (here is bcache B+tree nodes' number) to shrink, and pointer variable sc is sent from memory management code as parametr of a callback. If sc->nr_to_scan is smaller than c->btree_pages, after the above calculation, variable 'nr' will be 0 and nothing will be shrunk. It is frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make nr to be zero. Then bch_mca_scan() will do nothing more then acquiring and releasing mutex c->bucket_lock. This patch checkes whether nr is 0 after the above calculation, if 0 is the result then set 1 to variable 'n'. Then at least bch_mca_scan() will try to shrink a single B+tree node. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm btree: increase rebalance threshold in __rebalance2()Hou Tao2019-12-211-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 474e559567fa631dea8fb8407ab1b6090c903755 upstream. We got the following warnings from thin_check during thin-pool setup: $ thin_check /dev/vdb examining superblock examining devices tree missing devices: [1, 84] too few entries in btree_node: 41, expected at least 42 (block 138, max_entries = 126) examining mapping tree The phenomenon is the number of entries in one node of details_info tree is less than (max_entries / 3). And it can be easily reproduced by the following procedures: $ new a thin pool $ presume the max entries of details_info tree is 126 $ new 127 thin devices (e.g. 1~127) to make the root node being full and then split $ remove the first 43 (e.g. 1~43) thin devices to make the children reblance repeatedly $ stop the thin pool $ thin_check The root cause is that the B-tree removal procedure in __rebalance2() doesn't guarantee the invariance: the minimal number of entries in non-root node should be >= (max_entries / 3). Simply fix the problem by increasing the rebalance threshold to make sure the number of entries in each child will be greater than or equal to (max_entries / 3 + 1), so no matter which child is used for removal, the number will still be valid. Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* raid5: need to set STRIPE_HANDLE for batch headGuoqing Jiang2019-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit a7ede3d16808b8f3915c8572d783530a82b2f027 ] With commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list"), we don't want to set STRIPE_HANDLE flag for sh which is already in batch list. However, the stripe which is the head of batch list should set this flag, otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head), it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved. Thanks for Xiao's effort to verify the change. Fixes: 6ce220dd2f8ea ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list") Reported-by: Xiao Ni <xni@redhat.com> Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm zoned: reduce overhead of backing device checksDmitry Fomichev2019-12-174-32/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | commit e7fad909b68aa37470d9f2d2731b5bec355ee5d6 upstream. Commit 75d66ffb48efb3 added backing device health checks and as a part of these checks, check_events() block ops template call is invoked in dm-zoned mapping path as well as in reclaim and flush path. Calling check_events() with ATA or SCSI backing devices introduces a blocking scsi_test_unit_ready() call being made in sd_check_events(). Even though the overhead of calling scsi_test_unit_ready() is small for ATA zoned devices, it is much larger for SCSI and it affects performance in a very negative way. Fix this performance regression by executing check_events() only in case of any I/O errors. The function dmz_bdev_is_dying() is modified to call only blk_queue_dying(), while calls to check_events() are made in a new helper function, dmz_check_bdev(). Reported-by: zhangxiaoxu <zhangxiaoxu5@huawei.com> Fixes: 75d66ffb48efb3 ("dm zoned: properly handle backing device failure") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md/raid0: Fix an error message in raid0_make_request()Dan Carpenter2019-12-171-1/+1
| | | | | | | | | | | | | [ Upstream commit e3fc3f3d0943b126f76b8533960e4168412d9e5a ] The first argument to WARN() is supposed to be a condition. The original code will just print the mdname() instead of the full warning message. Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm flakey: Properly corrupt multi-page bios.Sweet Tea2019-12-051-11/+22
| | | | | | | | | | | | | | | | | | [ Upstream commit a00f5276e26636cbf72f24f79831026d2e2868e7 ] The flakey target is documented to be able to corrupt the Nth byte in a bio, but does not corrupt byte indices after the first biovec in the bio. Change the corrupting function to actually corrupt the Nth byte no matter in which biovec that index falls. A test device generating two-page bios, atop a flakey device configured to corrupt a byte index on the second page, verified both the failure to corrupt before this patch and the expected corruption after this change. Signed-off-by: John Dorminy <jdorminy@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md/raid10: prevent access of uninitialized resync_pages offsetJohn Pittman2019-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | commit 45422b704db392a6d79d07ee3e3670b11048bd53 upstream. Due to unneeded multiplication in the out_free_pages portion of r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is possible to access a resync_pages offset that has not been initialized. This access translates into a crash of the system within resync_free_pages() while passing a bad pointer to put_page(). Remove the multiplication, preventing access to the uninitialized area. Fixes: f0250618361db ("md: raid10: don't use bio's vec table to manage resync pages") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: John Pittman <jpittman@redhat.com> Suggested-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm raid: avoid bitmap with raid4/5/6 journal deviceHeinz Mauelshagen2019-12-011-1/+1
| | | | | | | | | | [ Upstream commit d857ad75edf3c0066fcd920746f9dc75382b3324 ] With raid4/5/6, journal device and write intent bitmap are mutually exclusive. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bcache: recal cached_dev_sectors on detachShenghui Wang2019-11-241-0/+1
| | | | | | | | | | | | | | | [ Upstream commit 46010141da6677b81cc77f9b47f8ac62bd1cbfd3 ] Recal cached_dev_sectors on cached_dev detached, as recal done on cached_dev attached. Update the cached_dev_sectors before bcache_device_detach called as bcache_device_detach will set bcache_device->c to NULL. Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md: allow metadata updates while suspending an array - fixNeilBrown2019-11-241-10/+12
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 059421e041eb461fb2b3e81c9adaec18ef03ca3c ] Commit 35bfc52187f6 ("md: allow metadata update while suspending.") added support for allowing md_check_recovery() to still perform metadata updates while the array is entering the 'suspended' state. This is needed to allow the processes of entering the state to complete. Unfortunately, the patch doesn't really work. The test for "mddev->suspended" at the start of md_check_recovery() means that the function doesn't try to do anything at all while entering suspend. This patch moves the code of updating the metadata while suspending to *before* the test on mddev->suspended. Reported-by: Jeff Mahoney <jeffm@suse.com> Fixes: 35bfc52187f6 ("md: allow metadata update while suspending.") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm: Use kzalloc for all structs with embedded biosets/mempoolsKent Overstreet2019-11-067-7/+7
| | | | | | | | | | | | | | | [ Upstream commit d377535405686f735b90a8ad4ba269484cd7c96e ] mempool_init()/bioset_init() require that the mempools/biosets be zeroed first; they probably should not _require_ this, but not allocating those structs with kzalloc is a fairly nonsensical thing to do (calling mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal and safe, but only works if said memory was zeroed.) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm snapshot: rework COW throttling to fix deadlockMikulas Patocka2019-11-061-16/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b21555786f18cd77f2311ad89074533109ae3ffa ] Commit 721b1d98fb517a ("dm snapshot: Fix excessive memory usage and workqueue stalls") introduced a semaphore to limit the maximum number of in-flight kcopyd (COW) jobs. The implementation of this throttling mechanism is prone to a deadlock: 1. One or more threads write to the origin device causing COW, which is performed by kcopyd. 2. At some point some of these threads might reach the s->cow_count semaphore limit and block in down(&s->cow_count), holding a read lock on _origins_lock. 3. Someone tries to acquire a write lock on _origins_lock, e.g., snapshot_ctr(), which blocks because the threads at step (2) already hold a read lock on it. 4. A COW operation completes and kcopyd runs dm-snapshot's completion callback, which ends up calling pending_complete(). pending_complete() tries to resubmit any deferred origin bios. This requires acquiring a read lock on _origins_lock, which blocks. This happens because the read-write semaphore implementation gives priority to writers, meaning that as soon as a writer tries to enter the critical section, no readers will be allowed in, until all writers have completed their work. So, pending_complete() waits for the writer at step (3) to acquire and release the lock. This writer waits for the readers at step (2) to release the read lock and those readers wait for pending_complete() (the kcopyd thread) to signal the s->cow_count semaphore: DEADLOCK. The above was thoroughly analyzed and documented by Nikos Tsironis as part of his initial proposal for fixing this deadlock, see: https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html Fix this deadlock by reworking COW throttling so that it waits without holding any locks. Add a variable 'in_progress' that counts how many kcopyd jobs are running. A function wait_for_in_progress() will sleep if 'in_progress' is over the limit. It drops _origins_lock in order to avoid the deadlock. Reported-by: Guruswamy Basavaiah <guru2018@gmail.com> Reported-by: Nikos Tsironis <ntsironis@arrikto.com> Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com> Tested-by: Nikos Tsironis <ntsironis@arrikto.com> Fixes: 721b1d98fb51 ("dm snapshot: Fix excessive memory usage and workqueue stalls") Cc: stable@vger.kernel.org # v5.0+ Depends-on: 4a3f111a73a8c ("dm snapshot: introduce account_start_copy() and account_end_copy()") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm snapshot: introduce account_start_copy() and account_end_copy()Mikulas Patocka2019-11-061-3/+13
| | | | | | | | | | | | | | [ Upstream commit a2f83e8b0c82c9500421a26c49eb198b25fcdea3 ] This simple refactoring moves code for modifying the semaphore cow_count into separate functions to prepare for changes that will extend these methods to provide for a more sophisticated mechanism for COW throttling. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm snapshot: use mutex instead of rw_semaphoreMikulas Patocka2019-11-061-41/+43
| | | | | | | | | | | | [ Upstream commit ae1093be5a0ef997833e200a0dafb9ed0b1ff4fe ] The rw_semaphore is acquired for read only in two places, neither is performance-critical. So replace it with a mutex -- which is more efficient. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md/raid0: fix warning message for parameter default_layoutSong Liu2019-10-291-1/+1
| | | | | | | | | | | | [ Upstream commit 3874d73e06c9b9dc15de0b7382fc223986d75571 ] The message should match the parameter, i.e. raid0.default_layout. Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: NeilBrown <neilb@suse.de> Reported-by: Ivan Topolsky <doktor.yak@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md/raid0: avoid RAID0 data corruption due to layout confusion.NeilBrown2019-10-052-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c84a1372df929033cb1a0441fb57bd3932f39ac9 ] If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md: only call set_in_sync() when it is expected to succeed.NeilBrown2019-10-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 480523feae581ab714ba6610388a3b4619a2f695 upstream. Since commit 4ad23a976413 ("MD: use per-cpu counter for writes_pending"), set_in_sync() is substantially more expensive: it can wait for a full RCU grace period which can be 10s of milliseconds. So we should only call it when the cost is justified. md_check_recovery() currently calls set_in_sync() every time it finds anything to do (on non-external active arrays). For an array performing resync or recovery, this will be quite often. Each call will introduce a delay to the md thread, which can noticeable affect IO submission latency. In md_check_recovery() we only need to call set_in_sync() if 'safemode' was non-zero at entry, meaning that there has been not recent IO. So we save this "safemode was nonzero" state, and only call set_in_sync() if it was non-zero. This measurably reduces mean and maximum IO submission latency during resync/recovery. Reported-and-tested-by: Jack Wang <jinpu.wang@cloud.ionos.com> Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Cc: stable@vger.kernel.org (v4.12+) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md: don't report active array_state until after revalidate_disk() completes.NeilBrown2019-10-052-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9d4b45d6af442237560d0bb5502a012baa5234b7 upstream. Until revalidate_disk() has completed, the size of a new md array will appear to be zero. So we shouldn't report, through array_state, that the array is active until that time. udev rules check array_state to see if the array is ready. As soon as it appear to be zero, fsck can be run. If it find the size to be zero, it will fail. So add a new flag to provide an interlock between do_md_run() and array_state_show(). This flag is set while do_md_run() is active and it prevents array_state_show() from reporting that the array is active. Before do_md_run() is called, ->pers will be NULL so array is definitely not active. After do_md_run() is called, revalidate_disk() will have run and the array will be completely ready. We also move various sysfs_notify*() calls out of md_run() into do_md_run() after MD_NOT_READY is cleared. This ensure the information is ready before the notification is sent. Prior to v4.12, array_state_show() was called with the mddev->reconfig_mutex held, which provided exclusion with do_md_run(). Note that MD_NOT_READY cleared twice. This is deliberate to cover both success and error paths with minimal noise. Fixes: b7b17c9b67e5 ("md: remove mddev_lock() from md_attr_show()") Cc: stable@vger.kernel.org (v4.12++) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md/raid6: Set R5_ReadError when there is read failure on parity diskXiao Ni2019-10-051-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | commit 143f6e733b73051cd22dcb80951c6c929da413ce upstream. 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.") avoids rereading P when it can be computed from other members. However, this misses the chance to re-write the right data to P. This patch sets R5_ReadError if the re-read fails. Also, when re-read is skipped, we also missed the chance to reset rdev->read_errors to 0. It can fail the disk when there are many read errors on P member disk (other disks don't have read error) V2: upper layer read request don't read parity/Q data. So there is no need to consider such situation. This is Reported-by: kbuild test robot <lkp@intel.com> Fixes: 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.") Cc: <stable@vger.kernel.org> #4.4+ Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* raid5: don't increment read_errors on EILSEQ returnNigel Croxon2019-10-051-1/+2
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit b76b4715eba0d0ed574f58918b29c1b2f0fa37a8 ] While MD continues to count read errors returned by the lower layer. If those errors are -EILSEQ, instead of -EIO, it should NOT increase the read_errors count. When RAID6 is set up on dm-integrity target that detects massive corruption, the leg will be ejected from the array. Even if the issue is correctable with a sector re-write and the array has necessary redundancy to correct it. The leg is ejected because it runs up the rdev->read_errors beyond conf->max_nr_stripes. The return status in dm-drypt when there is a data integrity error is -EILSEQ (BLK_STS_PROTECTION). Signed-off-by: Nigel Croxon <ncroxon@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* raid5: don't set STRIPE_HANDLE to stripe which is in batch listGuoqing Jiang2019-10-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6ce220dd2f8ea71d6afc29b9a7524c12e39f374a ] If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe could be set with STRIPE_ACTIVE by the handle_stripe function. And if error happens to the batch_head at the same time, break_stripe_batch_list is called, then below warning could happen (the same report in [1]), it means a member of batch list was set with STRIPE_ACTIVE. [7028915.431770] stripe state: 2001 [7028915.431815] ------------[ cut here ]------------ [7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456] [...] [7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9 [7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018 [7028915.431888] Workqueue: raid5wq raid5_do_work [raid456] [7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000 [7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456] [7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286 [7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000 [7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458 [7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4 [7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00 [7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001 [7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000 [7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0 [7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7028915.431910] Call Trace: [7028915.431923] handle_stripe+0x8e7/0x2020 [raid456] [7028915.431930] ? __wake_up_common_lock+0x89/0xc0 [7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456] [7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456] Also commit 59fc630b8b5f9f ("RAID5: batch adjacent full stripe write") said "If a stripe is added to batch list, then only the first stripe of the list should be put to handle_list and run handle_stripe." So don't set STRIPE_HANDLE to stripe which is already in batch list, otherwise the stripe could be put to handle_list and run handle_stripe, then the above warning could be triggered. [1]. https://www.spinics.net/lists/raid/msg62552.html Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md/raid1: fail run raid1 array when active disk less than oneYufen Yu2019-10-051-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 07f1a6850c5d5a65c917c3165692b5179ac4cb6b ] When run test case: mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal mdadm -S /dev/md1 mdadm -A /dev/md1 /dev/sd[b-c] --run --force mdadm --zero /dev/sda mdadm /dev/md1 -a /dev/sda echo offline > /sys/block/sdc/device/state echo offline > /sys/block/sdb/device/state sleep 5 mdadm -S /dev/md1 echo running > /sys/block/sdb/device/state echo running > /sys/block/sdc/device/state mdadm -A /dev/md1 /dev/sd[a-c] --run --force mdadm run fail with kernel message as follow: [ 172.986064] md: kicking non-fresh sdb from array! [ 173.004210] md: kicking non-fresh sdc from array! [ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors [ 173.022406] md1: failed to create bitmap (-5) In fact, when active disk in raid1 array less than one, we need to return fail in raid1_run(). Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md: don't set In_sync if array is frozenGuoqing Jiang2019-10-051-2/+9
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 062f5b2ae12a153644c765e7ba3b0f825427be1d ] When a disk is added to array, the following path is called in mdadm. Manage_subdevs -> sysfs_freeze_array -> Manage_add -> sysfs_set_str(&info, NULL, "sync_action","idle") Then from kernel side, Manage_add invokes the path (add_new_disk -> validate_super = super_1_validate) to set In_sync flag. Since In_sync means "device is in_sync with rest of array", and the new added disk need to resync thread to help the synchronization of data. And md_reap_sync_thread would call spare_active to set In_sync for the new added disk finally. So don't set In_sync if array is in frozen. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md: don't call spare_active in md_reap_sync_thread if all member devices ↵Guoqing Jiang2019-10-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | can't work [ Upstream commit 0d8ed0e9bf9643f27f4816dca61081784dedb38d ] When add one disk to array, the md_reap_sync_thread is responsible to activate the spare and set In_sync flag for the new member in spare_active(). But if raid1 has one member disk A, and disk B is added to the array. Then we offline A before all the datas are synchronized from A to B, obviously B doesn't have the latest data as A, but B is still marked with In_sync flag. So let's not call spare_active under the condition, otherwise B is still showed with 'U' state which is not correct. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md/raid1: end bio when the device faultyYufen Yu2019-10-051-12/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit eeba6809d8d58908b5ed1b5ceb5fcb09a98a7cad ] When write bio return error, it would be added to conf->retry_list and wait for raid1d thread to retry write and acknowledge badblocks. In narrow_write_error(), the error bio will be split in the unit of badblock shift (such as one sector) and raid1d thread issues them one by one. Until all of the splited bio has finished, raid1d thread can go on processing other things, which is time consuming. But, there is a scene for error handling that is not necessary. When the device has been set faulty, flush_bio_list() may end bios in pending_bio_list with error status. Since these bios has not been issued to the device actually, error handlding to retry write and acknowledge badblocks make no sense. Even without that scene, when the device is faulty, badblocks info can not be written out to the device. Thus, we also no need to handle the error IO. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm zoned: fix invalid memory accessMikulas Patocka2019-10-051-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0c8e9c2d668278652af028c3cc068c65f66342f4 ] Commit 75d66ffb48efb30f2dd42f041ba8b39c5b2bd115 ("dm zoned: properly handle backing device failure") triggers a coverity warning: *** CID 1452808: Memory - illegal accesses (USE_AFTER_FREE) /drivers/md/dm-zoned-target.c: 137 in dmz_submit_bio() 131 clone->bi_private = bioctx; 132 133 bio_advance(bio, clone->bi_iter.bi_size); 134 135 refcount_inc(&bioctx->ref); 136 generic_make_request(clone); >>> CID 1452808: Memory - illegal accesses (USE_AFTER_FREE) >>> Dereferencing freed pointer "clone". 137 if (clone->bi_status == BLK_STS_IOERR) 138 return -EIO; 139 140 if (bio_op(bio) == REQ_OP_WRITE && dmz_is_seq(zone)) 141 zone->wp_block += nr_blocks; 142 The "clone" bio may be processed and freed before the check "clone->bi_status == BLK_STS_IOERR" - so this check can access invalid memory. Fixes: 75d66ffb48efb3 ("dm zoned: properly handle backing device failure") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 02:48:25 +0000