summaryrefslogtreecommitdiffstats
path: root/drivers/memory
Commit message (Collapse)AuthorAgeFilesLines
* memory: renesas-rpc-if: Avoid unaligned bus access for HyperFlashAndrew Gabbasov2022-07-121-2/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1869023e24c0de73a160a424dac4621cefd628ae ] HyperFlash devices in Renesas SoCs use 2-bytes addressing, according to HW manual paragraph 62.3.3 (which officially describes Serial Flash access, but seems to be applicable to HyperFlash too). And 1-byte bus read operations to 2-bytes unaligned addresses in external address space read mode work incorrectly (returns the other byte from the same word). Function memcpy_fromio(), used by the driver to read data from the bus, in ARM64 architecture (to which Renesas cores belong) uses 8-bytes bus accesses for appropriate aligned addresses, and 1-bytes accesses for other addresses. This results in incorrect data read from HyperFlash in unaligned cases. This issue can be reproduced using something like the following commands (where mtd1 is a parition on Hyperflash storage, defined properly in a device tree): [Correct fragment, read from Hyperflash] root@rcar-gen3:~# dd if=/dev/mtd1 of=/tmp/zz bs=32 count=1 root@rcar-gen3:~# hexdump -C /tmp/zz 00000000 f4 03 00 aa f5 03 01 aa f6 03 02 aa f7 03 03 aa |................| 00000010 00 00 80 d2 40 20 18 d5 00 06 81 d2 a0 18 a6 f2 |....@ ..........| 00000020 [Incorrect read of the same fragment: see the difference at offsets 8-11] root@rcar-gen3:~# dd if=/dev/mtd1 of=/tmp/zz bs=12 count=1 root@rcar-gen3:~# hexdump -C /tmp/zz 00000000 f4 03 00 aa f5 03 01 aa 03 03 aa aa |............| 0000000c Fix this issue by creating a local replacement of the copying function, that performs only properly aligned bus accesses, and is used for reading from HyperFlash. Fixes: ca7d8b980b67f ("memory: add Renesas RPC-IF driver") Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20210922184830.29147-1-andrew_gabbasov@mentor.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: samsung: exynos5422-dmc: Fix refcount leak in of_get_dram_timingsMiaoqian Lin2022-06-291-11/+18
| | | | | | | | | | | | | | | | commit 1332661e09304b7b8e84e5edc11811ba08d12abe upstream. of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function doesn't call of_node_put() in some error paths. To unify the structure, Add put_node label and goto it on errors. Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20220602041721.64348-1-linmq006@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* memory: samsung: exynos5422-dmc: Avoid some over memory allocationChristophe JAILLET2022-06-091-3/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit 56653827f0d7bc7c2d8bac0e119fd1521fa9990a ] 'dmc->counter' is a 'struct devfreq_event_dev **', so there is some over memory allocation. 'counters_size' should be computed with 'sizeof(struct devfreq_event_dev *)'. Use 'sizeof(*dmc->counter)' instead to fix it. While at it, use devm_kcalloc() instead of devm_kzalloc()+open coded multiplication. Fixes: 6e7674c3c6df ("memory: Add DMC driver for Exynos5422") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/69d7e69346986e2fdb994d4382954c932f9f0993.1647760213.git.christophe.jaillet@wanadoo.fr Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual ModeGeert Uytterhoeven2022-05-091-14/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7e842d70fe599bc13594b650b2144c4b6e6d6bf1 ] HyperFlash devices fail to probe: rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits (SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived from half of the transfer size, cfr. the rpcif_bits_set() helper function. However, rpcif_reg_{read,write}() does not take the bus size into account, and does not double all Manual Mode Data Register access sizes when communicating with a HyperFlash or Octal-SPI Flash device. Fix this, and avoid the back-and-forth conversion between transfer size and Transfer Data Enable bits, by explicitly storing the transfer size in struct rpcif, and using that value to determine access size in rpcif_reg_{read,write}(). Enforce that the "high" Manual Mode Read/Write Data Registers (SM[RW]DR1) are only used for 8-byte data accesses. While at it, forbid writing to the Manual Mode Read Data Registers, as they are read-only. Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: renesas-rpc-if: fix platform-device leak in error pathJohan Hovold2022-04-201-1/+9
| | | | | | | | | | | | | | | commit b452dbf24d7d9a990d70118462925f6ee287d135 upstream. Make sure to free the flash platform device in the event that registration fails during probe. Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver") Cc: stable@vger.kernel.org # 5.8 Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220303180632.3194-1-johan@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* memory: atmel-ebi: Fix missing of_node_put in atmel_ebi_probeMiaoqian Lin2022-04-201-6/+17
| | | | | | | | | | | | | | [ Upstream commit 6f296a9665ba5ac68937bf11f96214eb9de81baa ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 87108dc78eb8 ("memory: atmel-ebi: Enable the SMC clock if specified") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220309110144.22412-1-linmq006@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: emif: check the pointer temp in get_device_details()Jia-Ju Bai2022-04-081-1/+1
| | | | | | | | | | | | | [ Upstream commit 5b5ab1bfa1898c6d52936a57c25c5ceba2cb2f87 ] The pointer temp is allocated by devm_kzalloc(), so it should be checked for error handling. Fixes: 7ec944538dde ("memory: emif: add basic infrastructure for EMIF driver") Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20220225132552.27894-1-baijiaju1990@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: emif: Add check for setup_interruptsJiasheng Jiang2022-04-081-2/+4
| | | | | | | | | | | | | | [ Upstream commit fd7bd80b46373887b390852f490f21b07e209498 ] As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value of the setup_interrupts() and return error if fails. Fixes: 68b4aee35d1f ("memory: emif: add interrupt and temperature handling") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220224025444.3256530-1-jiasheng@iscas.ac.cn Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: renesas-rpc-if: Return error in case devm_ioremap_resource() failsLad Prabhakar2022-01-271-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit 818fdfa89baac77a8df5a2c30f4fb798cc937aa0 ] Make sure we return error in case devm_ioremap_resource() fails for dirmap resource. Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211025205631.21151-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: tegra20-emc: Add runtime dependency on devfreq governor moduleDmitry Osipenko2021-11-251-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit 14b43c20c283de36131da0cb44f3170b9ffa7630 ] Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq governor to the list of the Tegra20 EMC driver module softdeps to allow userspace initramfs tools like dracut to automatically pull the devfreq module into ramfs image together with the EMC module. Reported-by: Nicolas Chauvet <kwizart@gmail.com> Suggested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probeDongliang Mu2021-11-181-7/+6
| | | | | | | | | | | | | | | | | | [ Upstream commit 4ed2f3545c2e5acfbccd7f85fea5b1a82e9862d7 ] The error handling code of fsl_ifc_ctrl_probe is problematic. When fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails, it forgets to free the irq and nand_irq. Meanwhile, if request_irq of fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if the request_irq is not successful. Fix this by refactoring the error handling code. Fixes: d2ae2e20fbdd ("driver/memory:Move Freescale IFC driver to a common driver") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20210925151434.8170-1-mudongliangabcd@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* memory: renesas-rpc-if: Correct QSPI data transfer in Manual modeWolfram Sang2021-11-181-35/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit fff53a551db50f5edecaa0b29a64056ab8d2bbca upstream. This patch fixes 2 problems: [1] The output warning logs and data loss when performing mount/umount then remount the device with jffs2 format. [2] The access width of SMWDR[0:1]/SMRDR[0:1] register is wrong. This is the sample warning logs when performing mount/umount then remount the device with jffs2 format: jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x031c51d4: Read 0x00034e00, calculated 0xadb272a7 The reason for issue [1] is that the writing data seems to get messed up. Data is only completed when the number of bytes is divisible by 4. If you only have 3 bytes of data left to write, 1 garbage byte is inserted after the end of the write stream. If you only have 2 bytes of data left to write, 2 bytes of '00' are added into the write stream. If you only have 1 byte of data left to write, 2 bytes of '00' are added into the write stream. 1 garbage byte is inserted after the end of the write stream. To solve problem [1], data must be written continuously in serial and the write stream ends when data is out. Following HW manual 62.2.15, access to SMWDR0 register should be in the same size as the transfer size specified in the SPIDE[3:0] bits in the manual mode enable setting register (SMENR). Be sure to access from address 0. So, in 16-bit transfer (SPIDE[3:0]=b'1100), SMWDR0 should be accessed by 16-bit width. Similar to SMWDR1, SMDDR0/1 registers. In current code, SMWDR0 register is accessed by regmap_write() that only set up to do 32-bit width. To solve problem [2], data must be written 16-bit or 8-bit when transferring 1-byte or 2-byte. Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver") Cc: <stable@vger.kernel.org> Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com> [wsa: refactored to use regmap only via reg_read/reg_write] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210922091007.5516-1-wsa+renesas@sang-engineering.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'for-v5.15/omap-gpmc' into for-nextKrzysztof Kozlowski2021-07-291-73/+118
|\
| * memory: omap-gpmc: Drop custom PM calls with cpu_pm notifierTony Lindgren2021-07-291-75/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | We can now switch over to using cpu_pm instead of custom calls and make the context save and restore functions static. Let's also move the save and restore functions to avoid adding forward declarations for them. And get rid of the static data pointer while at it. Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210727101034.32148-2-tony@atomide.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: omap-gpmc: Clear GPMC_CS_CONFIG7 register on restore if unusedTony Lindgren2021-07-291-0/+2
| | | | | | | | | | | | | | | | | | | | We want to clear any unused GPMC_CS_CONFIG7 register on restore to ensure unused chip selects are not enabled. Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210727101034.32148-1-tony@atomide.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
* | memory: tegra: fix unused-function warningArnd Bergmann2021-07-231-0/+2
|/ | | | | | | | | | | | | | | | | The tegra186_mc_client_sid_override() is only called from an #ifdef block: drivers/memory/tegra/tegra186.c:74:13: error: 'tegra186_mc_client_sid_override' defined but not used [-Werror=unused-function] 74 | static void tegra186_mc_client_sid_override(struct tegra_mc *mc, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Add another #ifdef around the called function. Fixes: 393d66fd2cac ("memory: tegra: Implement SID override programming") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210722090748.1157470-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
* Merge tag 'memory-controller-drv-tegra-5.14-2' of ↵Olof Johansson2021-06-1615-3879/+5027
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.14 - Tegra SoC, part two Second set of changes for Tegra SoC memory controller drivers, containing patchset from Thierry Reding: "The goal here is to avoid early identity mappings altogether and instead postpone the need for the identity mappings to when devices are attached to the SMMU. This works by making the SMMU driver coordinate with the memory controller driver on when to start enforcing SMMU translations. This makes Tegra behave in a more standard way and pushes the code to deal with the Tegra-specific programming into the NVIDIA SMMU implementation." This pulls a dependency from Will Deacon (ARM SMMU driver) and contains further ARM SMMU driver patches to resolve complex dependencies between different patchsets. The pull from Will contains only one patch ("Implement ->probe_finalize()"). Further work in Will's tree might depend on this patch, therefore patch was applied there. On the other hand, this ("Implement ->probe_finalize()") patch is also a dependency for ARM SMMU driver changes for Tegra. These changes, bringing seamless transition from the firmware framebuffer to the OS framebuffer, depend on earlier Tegra memory controller driver patches. * tag 'memory-controller-drv-tegra-5.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (37 commits) iommu/arm-smmu: Use Tegra implementation on Tegra186 iommu/arm-smmu: tegra: Implement SID override programming iommu/arm-smmu: tegra: Detect number of instances at runtime dt-bindings: arm-smmu: Add Tegra186 compatible string memory: tegra: Delete dead debugfs checking code iommu/arm-smmu: Implement ->probe_finalize() memory: tegra: Implement SID override programming memory: tegra: Split Tegra194 data into separate file memory: tegra: Add memory client IDs to tables memory: tegra: Unify drivers memory: tegra: Only initialize reset controller if available memory: tegra: Make IRQ support opitonal memory: tegra: Parameterize interrupt handler memory: tegra: Extract setup code into callback memory: tegra: Make per-SoC setup more generic memory: tegra: Push suspend/resume into SoC drivers memory: tegra: Introduce struct tegra_mc_ops memory: tegra: Unify struct tegra_mc across SoC generations memory: tegra: Consolidate register fields memory: tegra30-emc: Use devm_tegra_core_dev_init_opp_table() ... Link: https://lore.kernel.org/r/20210614195200.21657-1-krzysztof.kozlowski@canonical.com Signed-off-by: Olof Johansson <olof@lixom.net>
| * memory: tegra: Delete dead debugfs checking codeDan Carpenter2021-06-104-16/+0
| | | | | | | | | | | | | | | | | | | | | | The debugfs_create_dir() function does not return NULL, it returns error pointers. But in normal situations like this where the caller is not dereferencing "emc->debugfs.root" then we are not supposed to check the return. So instead of fixing these checks, we should delete them. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YMCQDTSyG8UuQoh0@mwanda Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Implement SID override programmingThierry Reding2021-06-032-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | Instead of programming all SID overrides during early boot, perform the operation on-demand after the SMMU translations have been set up for a device. This reuses data from device tree to match memory clients for a device and programs the SID specified in device tree, which corresponds to the SID used for the SMMU context banks for the device. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210603164632.1000458-2-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Split Tegra194 data into separate fileThierry Reding2021-06-034-1349/+1358
| | | | | | | | | | | | | | | | | | Keep the directory structure consistent by splitting the Tegra194 data into a separate file. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-13-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Add memory client IDs to tablesThierry Reding2021-06-031-0/+205
| | | | | | | | | | | | | | | | | | The memory client IDs will subsequently be used to program override SIDs for the given clients depending on the device tree configuration. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-12-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Unify driversThierry Reding2021-06-034-95/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | The Tegra210 (and earlier) driver now supports all the functionality that the Tegra186 (and later) driver does, so they can be unified. Note that previously the Tegra186 (and later) driver could be unloaded, even if that was perhaps not very useful. Older chips don't support that yet, but once they do this code can be reenabled. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-11-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Only initialize reset controller if availableThierry Reding2021-06-031-4/+5
| | | | | | | | | | | | | | | | | | | | | | The memory controller hot resets are implemented in the BPMP on Tegra186 and later, so there's no need to provide an implementation via the memory controller driver. Conditionally register the reset controller only if needed. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-10-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Make IRQ support opitonalThierry Reding2021-06-031-11/+13
| | | | | | | | | | | | | | | | | | Make IRQ support optional to help unify the Tegra186 memory controller driver with this one. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-9-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Parameterize interrupt handlerThierry Reding2021-06-033-109/+104
| | | | | | | | | | | | | | | | | | | | Tegra20 requires a slightly different interrupt handler than Tegra30 and later, so parameterize the handler, so that each SoC implementation can provide its own. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-8-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Extract setup code into callbackThierry Reding2021-06-036-57/+84
| | | | | | | | | | | | | | | | | | Separate the setup code for Tegra30 and later into a ->setup() callback and set it for all applicable chips. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-7-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Make per-SoC setup more genericThierry Reding2021-06-032-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | The current per-SoC setup code runs at a fairly arbitrary point during probe, thereby making it less flexible for other SoC generations. Move the call around slightly (after only the very basic, common setup that applies to all SoC generations has been performed), which will allow it to be used for other implementations. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-6-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Push suspend/resume into SoC driversThierry Reding2021-06-033-20/+58
| | | | | | | | | | | | | | | | | | Continuing the scheme of unification, push suspend/resume callbacks into per-SoC driver so that they can be properly parameterized. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-5-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Introduce struct tegra_mc_opsThierry Reding2021-06-032-3/+7
| | | | | | | | | | | | | | | | | | | | Subsequent patches will introduce further callbacks, so create a new struct tegra_mc_ops to collect all of them in a single place. Move the existing ->init() callback into the new structure. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-4-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Unify struct tegra_mc across SoC generationsThierry Reding2021-06-031-445/+836
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As another step towards unifying both the Tegra210 (and earlier) and Tegra186 (and later) memory controller drivers, unify the structures that are used to represent them. Note that this comes at a slight space penalty since some fields are not used on all generations, but the benefits of unifying the driver outweigh the downsides. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-3-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra: Consolidate register fieldsThierry Reding2021-06-035-2371/+2910
| | | | | | | | | | | | | | | | | | | | Subsequent patches will add more register fields to the tegra_mc_client structure, so consolidate all register field definitions into a common sub-structure for coherency. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210602163302.120041-2-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * memory: tegra30-emc: Use devm_tegra_core_dev_init_opp_table()Dmitry Osipenko2021-06-031-44/+4
| | | | | | | | | | | | | | | | | | | | | | Use common devm_tegra_core_dev_init_opp_table() helper for the OPP table initialization. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * memory: tegra20-emc: Use devm_tegra_core_dev_init_opp_table()Dmitry Osipenko2021-06-031-44/+4
| | | | | | | | | | | | | | | | | | | | | | Use common devm_tegra_core_dev_init_opp_table() helper for the OPP table initialization. Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * memory: tegra: Enable compile testing for all driversDmitry Osipenko2021-06-031-7/+11
| | | | | | | | | | | | | | | | Enable compile testing for all Tegra memory drivers. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * memory: tegra: Fix compilation warnings on 64bit platformsDmitry Osipenko2021-06-012-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Fix compilation warning on 64bit platforms caused by implicit promotion of 32bit signed integer to a 64bit unsigned value which happens after enabling compile-testing of the EMC drivers. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | Merge tag 'memory-controller-drv-pl353-5.14' of ↵Olof Johansson2021-06-121-304/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.14 - PL353 Bigger work around ARM Primecell PL35x SMC memory controller driver by Miquel Raynal built on previous series from Naga Sureshkumar Relli. This includes bindings cleanup and correction, converting these to dtschema and several cleanyps in pl353-smc driver. * tag 'memory-controller-drv-pl353-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: dt-binding: memory: pl353-smc: Convert to yaml MAINTAINERS: Add PL353 SMC entry memory: pl353-smc: Declare variables following a reverse christmas tree order memory: pl353-smc: Avoid useless acronyms in descriptions memory: pl353-smc: Let lower level controller drivers handle inits memory: pl353-smc: Rename goto labels memory: pl353-smc: Fix style dt-binding: memory: pl353-smc: Fix the NAND controller node in the example dt-binding: memory: pl353-smc: Drop unsupported nodes from the example dt-binding: memory: pl353-smc: Fix the example syntax and style dt-binding: memory: pl353-smc: Describe the child reg property dt-binding: memory: pl353-smc: Drop the partitioning section dt-binding: memory: pl353-smc: Document the range property dt-binding: memory: pl353-smc: Rephrase the binding Link: https://lore.kernel.org/r/20210611140659.61980-2-krzysztof.kozlowski@canonical.com Signed-off-by: Olof Johansson <olof@lixom.net>
| * | memory: pl353-smc: Declare variables following a reverse christmas tree orderMiquel Raynal2021-06-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | This is a purely cosmetic change. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20210610082040.2075611-15-miquel.raynal@bootlin.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * | memory: pl353-smc: Avoid useless acronyms in descriptionsMiquel Raynal2021-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | APER does not mean anything, while it seems legitimate to call this clock the AXI peripheral clock. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20210610082040.2075611-14-miquel.raynal@bootlin.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * | memory: pl353-smc: Let lower level controller drivers handle initsMiquel Raynal2021-06-101-294/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no point in having all these definitions at the SMC bus level, these are extremely tight to the NAND controller driver implementation, are not particularly generic, imply more boilerplate than needed, do not really follow the device model by receiving no argument and some of them are actually buggy. Let's get rid of these right now as there is no current user and keep this driver at a simple level: only the SMC bare initializations. The NAND controller driver which I am going to introduce will take care of redefining properly all these helpers and using them directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20210610082040.2075611-13-miquel.raynal@bootlin.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * | memory: pl353-smc: Rename goto labelsMiquel Raynal2021-06-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A goto label is better named do_something: than out_something_to_do: Use the former wording and really describe what the jump involves. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20210610082040.2075611-12-miquel.raynal@bootlin.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
| * | memory: pl353-smc: Fix styleMiquel Raynal2021-06-101-2/+2
| |/ | | | | | | | | | | | | | | Use proper spacing. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20210610082040.2075611-11-miquel.raynal@bootlin.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
* | memory: emif: remove unused frequency and voltage notifiersKrzysztof Kozlowski2021-06-101-678/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver defined several functions related to handling of frequency and voltage changes: - freq_post_notify_handling - freq_pre_notify_handling - volt_notify_handling All these are static, not used inside or outside of driver, and marked as unused with comment: "TODO: voltage notify handling should be hooked up to regulator framework as soon as the necessary support is available in mainline kernel. This function is un-used right now.". These have been added with commit a93de288aad3 ("memory: emif: handle frequency and voltage change events") in 2012 and are unused since then. Additionally mentioned regulator and clock hooking did not happen since then. If it did not happen for nine years, let's assume it will not happen suddenly now. Remove all unused functions which also allows removal of "t_ck" static variable "t_ck" and "addressing" member of private structure. No functionality is lost. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210527154101.80556-1-krzysztof.kozlowski@canonical.com
* | memory: fsl_ifc: fix leak of private memory on probe failureKrzysztof Kozlowski2021-06-101-2/+2
| | | | | | | | | | | | | | | | | | On probe error the driver should free the memory allocated for private structure. Fix this by using resource-managed allocation. Fixes: a20cbdeffce2 ("powerpc/fsl: Add support for Integrated Flash Controller") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210527154322.81253-2-krzysztof.kozlowski@canonical.com
* | memory: fsl_ifc: fix leak of IO mapping on probe failureKrzysztof Kozlowski2021-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | On probe error the driver should unmap the IO memory. Smatch reports: drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298. Fixes: a20cbdeffce2 ("powerpc/fsl: Add support for Integrated Flash Controller") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210527154322.81253-1-krzysztof.kozlowski@canonical.com
* | memory: pl353: Fix error return code in pl353_smc_probe()Zhen Lei2021-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | When no child nodes are matched, an appropriate error code -ENODEV should be returned. However, we currently do not explicitly assign this error code to 'err'. As a result, 0 was incorrectly returned. Fixes: fee10bd22678 ("memory: pl353: Add driver for arm pl353 static memory controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210515040004.6983-1-thunder.leizhen@huawei.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
* | memory: atmel-ebi: add missing of_node_put for loop iterationKrzysztof Kozlowski2021-05-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | Early exits from for_each_available_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/memory/atmel-ebi.c:593:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 604. Fixes: 6a4ec4cd0888 ("memory: add Atmel EBI (External Bus Interface) driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210423101815.119341-2-krzysztof.kozlowski@canonical.com
* | memory: stm32-fmc2-ebi: add missing of_node_put for loop iterationKrzysztof Kozlowski2021-05-111-0/+4
|/ | | | | | | | | | | | | Early exits from for_each_available_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/memory/stm32-fmc2-ebi.c:1046:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 1051. Fixes: 66b8173a197f ("memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/r/20210423101815.119341-1-krzysztof.kozlowski@canonical.com
* .gitignore: prefix local generated files with a slashMasahiro Yamada2021-05-021-1/+1
| | | | | | | | | | | | The pattern prefixed with '/' matches files in the same directory, but not ones in sub-directories. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Andra Paraschiv <andraprs@amazon.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Gabriel Krisman Bertazi <krisman@collabora.com>
* Merge tag 'pm-5.13-rc1' of ↵Linus Torvalds2021-04-261-10/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add some new hardware support (for example, IceLake-D idle states in intel_idle), fix some issues (for example, the handling of negative "sleep length" values in cpuidle governors), add new functionality to the existing drivers (for example, scale-invariance support in the ACPI CPPC cpufreq driver) and clean up code all over. Specifics: - Add idle states table for IceLake-D to the intel_idle driver and update IceLake-X C6 data in it (Artem Bityutskiy). - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and drop the unused do_idle() firmware call from it (Dmitry Osipenko). - Fix cpuidle-qcom-spm Kconfig entry (He Ying). - Fix handling of possible negative tick_nohz_get_next_hrtimer() return values of in cpuidle governors (Rafael Wysocki). - Add support for frequency-invariance to the ACPI CPPC cpufreq driver and update the frequency-invariance engine (FIE) to use it as needed (Viresh Kumar). - Simplify the default delay_us setting in the ACPI CPPC cpufreq driver (Tom Saeger). - Clean up frequency-related computations in the intel_pstate cpufreq driver (Rafael Wysocki). - Fix TBG parent setting for load levels in the armada-37xx cpufreq driver and drop the CPU PM clock .set_parent method for armada-37xx (Marek Behún). - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár). - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in cpufreq-dt to take the -EPROBE_DEFER one into acconut as appropriate (Quanyang Wang). - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich). - Drop the unused for_each_policy() macro from cpufreq (Shaokun Zhang). - Simplify computations in the schedutil cpufreq governor to avoid unnecessary overhead (Yue Hu). - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury). - Fix cpufreq documentation links in Kconfig (Alexander Monakov). - Fix PCI device power state handling in pci_enable_device_flags() to avoid issuse in some cases when the device depends on an ACPI power resource (Rafael Wysocki). - Add missing documentation of pm_runtime_resume_and_get() (Alan Stern). - Add missing static inline stub for pm_runtime_has_no_callbacks() to pm_runtime.h and drop the unused try_to_freeze_nowarn() definition (YueHaibing). - Drop duplicate struct device declaration from pm.h and fix a structure type declaration in intel_rapl.h (Wan Jiabing). - Use dev_set_name() instead of an open-coded equivalent of it in the wakeup sources code and drop a redundant local variable initialization from it (Andy Shevchenko, Colin Ian King). - Use crc32 instead of md5 for e820 memory map integrity check during resume from hibernation on x86 (Chris von Recklinghausen). - Fix typos in comments in the system-wide and hibernation support code (Lu Jialin). - Modify the generic power domains (genpd) code to avoid resuming devices in the "prepare" phase of system-wide suspend and hibernation (Ulf Hansson). - Add Hygon Fam18h RAPL support to the intel_rapl power capping driver (Pu Wen). - Add MAINTAINERS entry for the dynamic thermal power management (DTPM) code (Daniel Lezcano). - Add devm variants of operating performance points (OPP) API functions and switch over some users of the OPP framework to the new resource-managed API (Yangtao Li and Dmitry Osipenko). - Update devfreq core: * Register devfreq devices as cooling devices on demand (Daniel Lezcano). * Add missing unlock opeation in devfreq_add_device() (Lukasz Luba). * Use the next frequency as resume_freq instead of the previous frequency when using the opp-suspend property (Dong Aisheng). * Check get_dev_status in devfreq_update_stats() (Dong Aisheng). * Fix set_freq path for the userspace governor in Kconfig (Dong Aisheng). * Remove invalid description of get_target_freq() (Dong Aisheng). - Update devfreq drivers: * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded of_match_ptr() (Dong Aisheng, Fabio Estevam). * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop references to undefined symbols (Enric Balletbo i Serra, Gaël PORTAY). * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof Kozlowski). * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam). - Fix kernel-doc warnings in three places (Pierre-Louis Bossart). - Fix typo in the pm-graph utility code (Ricardo Ribalda)" * tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) PM: wakeup: remove redundant assignment to variable retval PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check cpufreq: Kconfig: fix documentation links PM: wakeup: use dev_set_name() directly PM: runtime: Add documentation for pm_runtime_resume_and_get() cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits() cpufreq: armada-37xx: Fix module unloading cpufreq: armada-37xx: Remove cur_frequency variable cpufreq: armada-37xx: Fix determining base CPU frequency cpufreq: armada-37xx: Fix driver cleanup when registration failed clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz cpufreq: armada-37xx: Fix the AVS value for load L1 clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock cpufreq: armada-37xx: Fix setting TBG parent for load levels cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration cpuidle: tegra: Remove do_idle firmware call cpuidle: tegra: Fix C7 idling state on Tegra114 PM: sleep: fix typos in comments cpufreq: Remove unused for_each_policy macro ...
| * memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP APIYangtao Li2021-03-251-10/+3
| | | | | | | | | | | | | | | | | | Use resource-managed OPP API to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 20:20:22 +0000