summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core
Commit message (Collapse)AuthorAgeFilesLines
* mmc: core: Export device/vendor ids from Common CIS for SDIO cardsPali Rohár2020-05-293-2/+51
| | | | | | | | | | | | | | | | | | | | | | | Device/vendor ids from Common CIS (Card Information Structure) may be different as device/vendor ids from CIS on particular SDIO function. Kernel currently exports only device/vendor ids from SDIO functions and not "main" device/vendor ids from Common CIS. This patch exports "main" device/vendor ids for SDIO and SD combo cards at top level mmc device in sysfs hierarchy. Userspace can use e.g. udev rules to correctly match whole SDIO card based on Common CIS device/vendor id and not only one particular SDIO function. Having this information in userspace also helps developers to debug whole SDIO card as e.g. kernel mmc quirks use device/vendor ids from Common CIS and not from particular SDIO function. Also it allows to write userspace applications which list all connected SDIO cards based on CIS ids. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Link: https://lore.kernel.org/r/20200527110858.17504-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cardsPali Rohár2020-05-291-0/+7
| | | | | | | | | | SDIO non-combo cards are not handled by mmc_block driver and do not have accessible CID register which is used for MMC_NAME= construction. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Link: https://lore.kernel.org/r/20200527110858.17504-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdio: Fix macro name for Marvell device with ID 0x9134Pali Rohár2020-05-281-1/+1
| | | | | | | | | | | | | | | | | | Marvell SDIO device ID 0x9134 is used in SDIO Common CIS (Card Information Structure) and not in SDIO wlan function (with ID 1). SDIO Common CIS is accessed by function ID 0. So change this misleading macro name to SDIO_DEVICE_ID_MARVELL_8887_F0 as it does not refer to wlan function. It refers to function 0. Wlan module on this SDIO card is available at function ID 1 and is identified by different SDIO device ID 0x9135. Kernel quirks for SDIO devices are matched against device ID from SDIO Common CIS. Therefore device ID used in quirk is correct, just has misleading name. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* Merge branch 'fixes' into nextUlf Hansson2020-05-281-1/+1
|\
| * mmc: block: Fix use-after-free issue for rpmbPeng Hao2020-05-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The data structure member “rpmb->md” was passed to a call of the function “mmc_blk_put” after a call of the function “put_device”. Reorder these function calls to keep the data accesses consistent. Fixes: 1c87f7357849 ("mmc: block: Fix bug when removing RPMB chardev ") Signed-off-by: Peng Hao <richard.peng@oppo.com> Cc: stable@vger.kernel.org [Uffe: Fixed up mangled patch and updated commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Enable erase/discard/trim support for all mmc hostsUlf Hansson2020-05-281-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | Step by step, mmc host drivers and the mmc core have been improved in regards to support erase/discard/trim operations. We have now reached a point when it no longer seems reasonable to use an opt-in approach to enable the functionality. Therefore, let's switch to make the operations always supported. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200508112853.23525-1-ulf.hansson@linaro.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* | mmc: core: expose info about enhanced rpmb supportKrishna Konda2020-05-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following eMMC JEDEC JESD84-B51 standard, an enhanced form of rpmb is supported. What this enhanced mode supports is in addition to be able to write one rpmb or two rpmb frames at a time, 32 frames can be written at a time. Expose this information present in ext csd field so that the user space application that wants to make use of this can do so. Signed-off-by: Krishna Konda <kkonda@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1588341189-4371-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdio: Align the initialization commands in retry path for UHS-IUlf Hansson2020-05-281-27/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | According to the comment in mmc_sdio_reinit_card(), some SDIO cards may require a "[CMD5,5,3,7] init sequence", which isn't always obeyed in mmc_sdio_init_card(). Especially, when we end up retrying the UHS-I specific initialization, there is a missing CMD5. Let's update the code to make the behaviour consistent and let's also take the opportunity to clean up the code a bit, to avoid open coding. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-5-ulf.hansson@linaro.org
* | mmc: sdio: Re-use negotiated OCR mask when re-sending CMD8Ulf Hansson2020-05-281-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | While initializing an SDIO card in mmc_sdio_init_card(), we may need to retry the UHS-I specific initialization, in case the first attempt fails. This leads to resending a CMD8, but also to restart from scratch with the so called OCR mask negotiations. This is unnecessary as we already have a negotiated OCR mask, so let's use that instead. In this way, the behaviour also becomes more consistent with other similar paths. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-4-ulf.hansson@linaro.org
* | mmc: sdio: Fix several potential memory leaks in mmc_sdio_init_card()Ulf Hansson2020-05-281-31/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Over the years, the code in mmc_sdio_init_card() has grown to become quite messy. Unfortunate this has also lead to that several paths are leaking memory in form of an allocated struct mmc_card, which includes additional data, such as initialized struct device for example. Unfortunate, it's a too complex task find each offending commit. Therefore, this change fixes all memory leaks at once. Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-3-ulf.hansson@linaro.org
* | mmc: sdio: Fix potential NULL pointer error in mmc_sdio_init_card()Ulf Hansson2020-05-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I specific initialization, which leads to removal of the previously allocated card. A new card is then re-allocated while retrying. However, in one of the corresponding error paths we may end up to remove an already removed card, which likely leads to a NULL pointer exception. So, let's fix this. Fixes: 5fc3d80ef496 ("mmc: sdio: don't use rocr to check if the card could support UHS mode") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org
* | mmc: core: Use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTEZou Wei2020-05-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes coccicheck warning: drivers/mmc/core/debugfs.c:222:0-23: WARNING: mmc_clock_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files Fixes: 703aae3d09a4b ("mmc: add a file to debugfs for changing host clock at runtime") Fixes: a04c50aaa916f ("mmc: core: no need to check return value of debugfs_create functions") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1587633319-19835-1-git-send-email-zou_wei@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sd: use HIGH_SPEED_BUS_SPEED in mmc_sd_switch_hs()Jisheng Zhang2020-05-281-2/+2
| | | | | | | | | | | | | | | | | | Use the well defined HIGH_SPEED_BUS_SPEED macro in mmc_sd_switch_hs() to make code more readable. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200410145643.630b0731@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: core: Return 1 from mmc_regulator_set_vqmmc() if switch skippedMarek Vasut2020-05-281-3/+14
|/ | | | | | | | | | | Adjust mmc_regulator_set_vqmmc() to return 1 if the voltage switch was skipped because the regulator voltage was already correct. This allows drivers to detect such condition and possibly skip various voltage switching extras. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20200416163649.336967-2-marex@denx.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: Fix request completion in the CQE timeout pathAdrian Hunter2020-05-081-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | First, it should be noted that the CQE timeout (60 seconds) is substantial so a CQE request that times out is really stuck, and the race between timeout and completion is extremely unlikely. Nevertheless this patch fixes an issue with it. Commit ad73d6feadbd7b ("mmc: complete requests from ->timeout") preserved the existing functionality, to complete the request. However that had only been necessary because the block layer timeout handler had been marking the request to prevent it from being completed normally. That restriction was removed at the same time, the result being that a request that has gone will have been completed anyway. That is, the completion was unnecessary. At the time, the unnecessary completion was harmless because the block layer would ignore it, although that changed in kernel v5.0. Note for stable, this patch will not apply cleanly without patch "mmc: core: Fix recursive locking issue in CQE recovery path" Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: ad73d6feadbd7b ("mmc: complete requests from ->timeout") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200508062227.23144-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Fix recursive locking issue in CQE recovery pathSarthak Garg2020-05-081-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Consider the following stack trace -001|raw_spin_lock_irqsave -002|mmc_blk_cqe_complete_rq -003|__blk_mq_complete_request(inline) -003|blk_mq_complete_request(rq) -004|mmc_cqe_timed_out(inline) -004|mmc_mq_timed_out mmc_mq_timed_out acquires the queue_lock for the first time. The mmc_blk_cqe_complete_rq function also tries to acquire the same queue lock resulting in recursive locking where the task is spinning for the same lock which it has already acquired leading to watchdog bark. Fix this issue with the lock only for the required critical section. Cc: <stable@vger.kernel.org> Fixes: 1e8e55b67030 ("mmc: block: Add CQE support") Suggested-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1588868135-31783-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Check request type before completing the requestVeerabhadrarao Badiganti2020-05-081-1/+2
| | | | | | | | | | | | | | | | | | | | | In the request completion path with CQE, request type is being checked after the request is getting completed. This is resulting in returning the wrong request type and leading to the IO hang issue. ASYNC request type is getting returned for DCMD type requests. Because of this mismatch, mq->cqe_busy flag is never getting cleared and the driver is not invoking blk_mq_hw_run_queue. So requests are not getting dispatched to the LLD from the block layer. All these eventually leading to IO hang issues. So, get the request type before completing the request. Cc: <stable@vger.kernel.org> Fixes: 1e8e55b67030 ("mmc: block: Add CQE support") Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1588775643-18037-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: make mmc_interrupt_hpi() staticJason Yan2020-04-201-1/+1
| | | | | | | | | | | | | Fix the following sparse warning: drivers/mmc/core/mmc_ops.c:881:5: warning: symbol 'mmc_interrupt_hpi' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Fixes: 55c2b8b9a383 ("mmc: core: Re-work the code for eMMC sanitize") Link: https://lore.kernel.org/r/20200403034727.11879-1-yanaijie@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Re-work the code for eMMC sanitizeUlf Hansson2020-03-264-60/+38
| | | | | | | | | | | | | | | | | | | | The error path for sanitize operations that completes with -ETIMEDOUT, is tightly coupled with the internal request handling code of the core. More precisely, mmc_wait_for_req_done() checks for specific sanitize errors. This is not only inefficient as it affects all types of requests, but also hackish. Therefore, let's improve the behaviour by moving the error path out of the mmc core. To do that, retuning needs to be held while running the sanitize operation. Moreover, to avoid exporting unnecessary symbols to the mmc block module, let's move the code into the mmc_ops.c file. While updating the actual code, let's also take the opportunity to clean up some of the mess around it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200316152152.15122-1-ulf.hansson@linaro.org
* mmc: mmc_test: Pass different sg lists for non-blocking requestsVeerabhadrarao Badiganti2020-03-241-12/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supply a separate sg list for each of the request in non-blocking IO test cases where two requests will be issued at same time. Otherwise, sg memory may get unmapped when a request is done while same memory is being accessed by controller from the other request, and it leads to iommu errors with below call stack: __arm_lpae_unmap+0x2e0/0x478 arm_lpae_unmap+0x54/0x70 arm_smmu_unmap+0x64/0xa4 __iommu_unmap+0xb8/0x1f0 iommu_unmap_fast+0x38/0x48 __iommu_dma_unmap+0x88/0x108 iommu_dma_unmap_sg+0x90/0xa4 sdhci_post_req+0x5c/0x78 mmc_test_start_areq+0x10c/0x120 [mmc_test] mmc_test_area_io_seq+0x150/0x264 [mmc_test] mmc_test_rw_multiple+0x174/0x1c0 [mmc_test] mmc_test_rw_multiple_sg_len+0x44/0x6c [mmc_test] mmc_test_profile_sglen_wr_nonblock_perf+0x6c/0x94 [mmc_test] mtf_test_write+0x238/0x3cc [mmc_test] Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1582714668-17247-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Fix indentationJérôme Pouiller2020-03-241-7/+8
| | | | | | | | sdio_single_irq_set() was indented with a mix of tabs and spaces. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200221163147.608677-1-Jerome.Pouiller@silabs.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Fixup support for HW busy detection for HPI commandsUlf Hansson2020-03-241-11/+25
| | | | | | | | | | | | | | | | | | | In case the host specify a max_busy_timeout, we need to validate that the needed timeout for the HPI command conforms to that requirement. If that's not the case, let's convert from a R1B response to a R1 response, as to instruct the host to avoid HW busy detection. Additionally, when R1B is used we must also inform the host about the busy timeout for the command, so let's do that via updating cmd.busy_timeout. Finally, when R1B is used and in case the host supports HW busy detection, there should be no need for doing polling, so then skip that. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-12-ulf.hansson@linaro.org
* mmc: core: Convert to mmc_poll_for_busy() for HPI commandsUlf Hansson2020-03-242-15/+6
| | | | | | | | | | | | | | | | | | | Rather than open coding the polling loop in mmc_interrupt_hpi(), let's convert to use mmc_poll_for_busy(). Note that, moving to mmc_poll_for_busy() for HPI also improves the behaviour according to below. - Adds support for polling via the optional ->card_busy() host ops. - Require R1_READY_FOR_DATA to be set in the CMD13 response before exiting the polling loop. - Adds a throttling mechanism to avoid CPU hogging when polling. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-11-ulf.hansson@linaro.org
* mmc: core: Drop redundant out-parameter to mmc_send_hpi_cmd()Ulf Hansson2020-03-241-4/+2
| | | | | | | | | | The 'u32 *status' is unused by the caller, so let's drop it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-10-ulf.hansson@linaro.org
* mmc: core: Convert to mmc_poll_for_busy() for erase/trim/discardUlf Hansson2020-03-243-40/+33
| | | | | | | | | | | | | | | | | | | | | | | | | Rather than open coding the polling loop in mmc_do_erase(), let's convert to use mmc_poll_for_busy(). To allow a slightly different error parsing during polling, compared to the __mmc_switch() case, a new in-parameter to mmc_poll_for_busy() is needed, but other than that the conversion is straight forward. Besides addressing the open coding issue, moving to mmc_poll_for_busy() for erase/trim/discard improves the behaviour according to below. - Adds support for polling via the optional ->card_busy() host ops. - Returns zero to indicate success when the final polling attempt finds the card non-busy, even if the timeout expired. - Exits the polling loop when state moves to R1_STATE_TRAN, rather than when leaving R1_STATE_PRG. - Decreases the starting range for throttling to 32-64us. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-9-ulf.hansson@linaro.org
* mmc: core: Update CMD13 busy check for CMD6 commandsUlf Hansson2020-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Through mmc_poll_for_busy() a CMD13 may be sent to get the status of the (e)MMC card. If the state of the card is R1_STATE_PRG, the card is considered as being busy, which means we continue to poll with CMD13. This seems to be sufficient, but it's also unnecessary fragile, as it means a new command/request could potentially be sent to the card when it's in an unknown state. To try to improve the situation, but also to move towards a more consistent CMD13 polling behaviour in the mmc core, let's deploy the same policy we use for regular I/O write requests. In other words, let's check that card returns to the R1_STATE_TRAN and that the R1_READY_FOR_DATA bit is set in the CMD13 response, before exiting the polling loop. Note that, potentially this changed behaviour could lead to unnecessary waiting for the timeout to expire, if the card for some reason, moves to an unexpected error state. However, as we bail out from the polling loop when R1_SWITCH_ERROR bit is set or when the CMD13 fails, this shouldn't be an issue. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-8-ulf.hansson@linaro.org
* mmc: core: Enable re-use of mmc_blk_in_tran_state()Ulf Hansson2020-03-241-20/+4
| | | | | | | | | | | | | To allow subsequent changes to re-use the code from the static function mmc_blk_in_tran_state(), let's move it to a public header. While at it, let's also rename it to mmc_ready_for_data(), as to try to better describe its purpose. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-7-ulf.hansson@linaro.org
* mmc: core: Split up mmc_poll_for_busy()Ulf Hansson2020-03-241-16/+31
| | | | | | | | | | | | To make the code more readable, move the part that gets the busy status of the card out into a separate function, mmc_busy_status(). Then call it from mmc_poll_for_busy(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-6-ulf.hansson@linaro.org
* mmc: core: Drop redundant in-parameter to __mmc_switch()Ulf Hansson2020-03-243-20/+15
| | | | | | | | | | | The use_busy_signal in-parameter is set true by all callers of __mmc_switch(), hence it's redundant so drop it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-5-ulf.hansson@linaro.org
* mmc: core: Extend mmc_switch_status() to rid of __mmc_switch_status()Ulf Hansson2020-03-243-17/+11
| | | | | | | | | | | | To simplify code, let's extend mmc_switch_status() to cope with needs addressed in __mmc_switch_status(). Then move all users to the updated mmc_switch_status() API and drop __mmc_switch_status() altogether. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-4-ulf.hansson@linaro.org
* mmc: core: Drop unused defineUlf Hansson2020-03-241-1/+0
| | | | | | | | | | | The last user of MMC_OPS_TIMEOUT_MS was recently removed, however the define stayed around. Let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-3-ulf.hansson@linaro.org
* mmc: core: Throttle polling rate for CMD6Ulf Hansson2020-03-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | In mmc_poll_for_busy() we loop continuously, either by sending a CMD13 or by invoking the ->card_busy() host ops, as to detect when the card stops signaling busy. This behaviour is problematic as it may cause CPU hogging, especially when the busy signal time reaches beyond a few ms. Let's fix the issue by adding a throttling mechanism, that inserts a usleep_range() in between the polling attempts. The sleep range starts at 32-64us, but increases for each loop by a factor of 2, up until the range reaches ~32-64ms. In this way, we are able to keep the loop fine-grained enough for short busy signaling times, while also not hogging the CPU for longer times. Note that, this change is inspired by the similar throttling mechanism that we already use for mmc_do_erase(). Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200204085449.32585-2-ulf.hansson@linaro.org
* mmc: core: Enable the MMC host software queue for the SD cardBaolin Wang2020-03-241-0/+10
| | | | | | | | | | | | | | | | | Enable the MMC host software queue for the SD card if the host controller supports the MMC host software queue. On my Spreadtrum platform, I did not see any obvious performance changes in 4K block size when changing to use hsq for the SD cards, I think the reason is the SD card works at a low speed on my platform, and most of time is spent in the hardware. But we can see some obvious improvements when enabling the packed request based on hsq, that's why we still add hsq support for the SD cards. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/0065b4631fef2d61c3b89d14a4ea4f2b7499ea56.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: Add MMC host software queue supportBaolin Wang2020-03-243-11/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the MMC read/write stack will always wait for previous request is completed by mmc_blk_rw_wait(), before sending a new request to hardware, or queue a work to complete request, that will bring context switching overhead and spend some extra time to poll the card for busy completion for I/O writes via sending CMD13, especially for high I/O per second rates, to affect the IO performance. Thus this patch introduces MMC software queue interface based on the hardware command queue engine's interfaces, which is similar with the hardware command queue engine's idea, that can remove the context switching. Moreover we set the default queue depth as 64 for software queue, which allows more requests to be prepared, merged and inserted into IO scheduler to improve performance, but we only allow 2 requests in flight, that is enough to let the irq handler always trigger the next request without a context switch, as well as avoiding a long latency. Moreover the host controller should support HW busy detection for I/O operations when enabling the host software queue. That means, the host controller must not complete a data transfer request, until after the card stops signals busy. From the fio testing data in cover letter, we can see the software queue can improve some performance with 4K block size, increasing about 16% for random read, increasing about 90% for random write, though no obvious improvement for sequential read and write. Moreover we can expand the software queue interface to support MMC packed request or packed command in future. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/4409c1586a9b3ed20d57ad2faf6c262fc3ccb6e2.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep commandUlf Hansson2020-03-121-2/+5
| | | | | | | | | | | | | | | | | The busy timeout for the CMD5 to put the eMMC into sleep state, is specific to the card. Potentially the timeout may exceed the host->max_busy_timeout. If that becomes the case, mmc_sleep() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200311092036.16084-1-ulf.hansson@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discardUlf Hansson2020-03-111-1/+4
| | | | | | | | | | | | | | | | | | | | The busy timeout that is computed for each erase/trim/discard operation, can become quite long and may thus exceed the host->max_busy_timeout. If that becomes the case, mmc_do_erase() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-By: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Allow host controllers to require R1B for CMD6Ulf Hansson2020-03-111-2/+4
| | | | | | | | | | | | | | | | | | It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this. In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout. Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Cc: <stable@vger.kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Tested-by: Faiz Abbas <faiz_abbas@ti.com> Tested-By: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()Ulf Hansson2020-01-241-14/+11
| | | | | | | | | | | | | All callers of __mmc_switch() should now be specifying a valid timeout for the CMD6 command. However, just to be sure, let's print a warning and default to use the generic_cmd6_time in case the provided timeout_ms argument is zero. In this context, let's also simplify some of the corresponding code and clarify some related comments. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org
* mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSDUlf Hansson2020-01-241-3/+3
| | | | | | | | | | | | | The INAND_CMD38_ARG_EXT_CSD is a vendor specific EXT_CSD register, which is used to prepare an erase/trim operation. However, it doesn't make sense to use a timeout of 10 minutes while updating the register, which becomes the case when the timeout_ms argument for mmc_switch() is set to zero. Instead, let's use the generic_cmd6_time, as that seems like a reasonable timeout to use for these cases. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200122142747.5690-3-ulf.hansson@linaro.org
* mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMCUlf Hansson2020-01-241-3/+6
| | | | | | | | | | | The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH to complete, are not defined by the eMMC spec. However, a timeout of 10 minutes as is currently being used, is just silly for both of these cases. Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for CACHE_FLUSH. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@linaro.org
* mmc: core: limit probe clock frequency to configured f_maxMichał Mirosław2020-01-201-2/+8
| | | | | | | | | | Currently MMC core disregards host->f_max during card initialization phase. Obey upper boundary for the clock frequency and skip faster speeds when they are above the limit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/f471bceaf237d582d746bd289c4c4f3639cb7b45.1577962382.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Remove mmc_gpiod_request_*(invert_gpio)Michał Mirosław2019-12-182-16/+4
| | | | | | | | Now that invert_gpio arguments are unused, let's remove them. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/64d766d1f8af2e22bce32f4ffa453f7234207ad6.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Rework cd-gpio handlingMichał Mirosław2019-12-182-26/+12
| | | | | | | | | | | | There are a few places around the code that invert inverted and possibly inverted CD line. That's really confusing. Squash them all into one place in mmc_gpiod_request_cd(). MMC_CAP2_CD_ACTIVE_HIGH is used analogously to WP line: in GPIO mode it is used only at probe time to switch polarity, for native mode it is left as is. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/db189b715596d63caf8c6a088bddc71dd69a879b.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Rework wp-gpio handlingMichał Mirosław2019-12-182-7/+7
| | | | | | | | | | Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be inverted compared to DT/platform-specified polarity. The flag is not used after init in GPIO mode anyway. No functional changes intended. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/a60f563f11bbff821da2fa2949ca82922b144860.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Fix size overflow for mmc partitionsBradley Bolen2019-11-181-5/+4
| | | | | | | | | | With large eMMC cards, it is possible to create general purpose partitions that are bigger than 4GB. The size member of the mmc_part struct is only an unsigned int which overflows for gp partitions larger than 4GB. Change this to a u64 to handle the overflow. Signed-off-by: Bradley Bolen <bradleybolen@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: fix wl1251 sdio quirksH. Nikolaus Schaller2019-11-151-0/+7
| | | | | | | | | | wl1251 and wl1271 have different vendor id and device id. So we need to handle both with sdio quirks. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Re-work HW reset for SDIO cardsUlf Hansson2019-11-144-5/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It have turned out that it's not a good idea to unconditionally do a power cycle and then to re-initialize the SDIO card, as currently done through mmc_hw_reset() -> mmc_sdio_hw_reset(). This because there may be multiple SDIO func drivers probed, who also shares the same SDIO card. To address these scenarios, one may be tempted to use a notification mechanism, as to allow the core to inform each of the probed func drivers, about an ongoing HW reset. However, supporting such an operation from the func driver point of view, may not be entirely trivial. Therefore, let's use a more simplistic approach to solve the problem, by instead forcing the card to be removed and re-detected, via scheduling a rescan-work. In this way, we can rely on existing infrastructure, as the func driver's ->remove() and ->probe() callbacks, becomes invoked to deal with the cleanup and the re-initialization. This solution may be considered as rather heavy, especially if a func driver doesn't share its card with other func drivers. To address this, let's keep the current immediate HW reset option as well, but run it only when there is one func driver probed for the card. Finally, to allow the caller of mmc_hw_reset(), to understand if the reset is being asynchronously managed from a scheduled work, it returns 1 (propagated from mmc_sdio_hw_reset()). If the HW reset is executed successfully and synchronously it returns 0, which maintains the existing behaviour. Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: core: Drop check for mmc_card_is_removable() in mmc_rescan()Ulf Hansson2019-11-141-5/+2
| | | | | | | | | | | | | | | Upfront in mmc_rescan() we use the host->rescan_entered flag, to allow scanning only once for non-removable cards. Therefore, it's also not possible that we can have a corresponding card bus attached (host->bus_ops is NULL), when we are scanning non-removable cards. For this reason, let' drop the check for mmc_card_is_removable() as it's redundant. Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: Add CMD13 polling for MMC IOCTLS with R1B responseChaotian Jing2019-11-131-92/+55
| | | | | | | | | | | | MMC IOCTLS with R1B responses may cause the card to enter the busy state, which means it's not ready to receive a new request. To prevent new requests from being sent to the card, use a CMD13 polling loop to verify that the card returns to the transfer state, before completing the request. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: block: Make card_busy_detect() a bit more genericChaotian Jing2019-11-131-8/+8
| | | | | | | | | | | To prepare for more users of card_busy_detect(), let's drop the struct request * as an in-parameter and convert to log the error message via dev_err() instead of pr_err(). Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 07:21:45 +0000