summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: b53: VLAN filtering is global to all usersFlorian Fainelli2021-03-301-7/+7
| | | | | | | | | | | | | | commit d45c36bafb94e72fdb6dee437279b61b6d97e706 upstream. The bcm_sf2 driver uses the b53 driver as a library but does not make usre of the b53_setup() function, this made it fail to inherit the vlan_filtering_is_global attribute. Fix this by moving the assignment to b53_switch_alloc() which is used by bcm_sf2. Fixes: 7228b23e68f7 ("net: dsa: b53: Let DSA handle mismatched VLAN filtering settings") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: Qualify phydev->dev_flags based on portFlorian Fainelli2021-03-301-2/+4
| | | | | | | | | | | | | | | [ Upstream commit 47142ed6c34d544ae9f0463e58d482289cbe0d46 ] Similar to commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ("net: bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to qualify the phydev->dev_flags based on whether the port is connected to an internal or external PHY otherwise we risk having a flags collision with a completely different interpretation depending on the driver. Fixes: aa9aef77c761 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: b53: Support setting learning on portFlorian Fainelli2021-03-203-5/+19
| | | | | | | | | | | | | | | | | | commit f9b3827ee66cfcf297d0acd6ecf33653a5f297ef upstream. Add support for being able to set the learning attribute on port, and make sure that the standalone ports start up with learning disabled. We can remove the code in bcm_sf2 that configured the ports learning attribute because we want the standalone ports to have learning disabled by default and port 7 cannot be bridged, so its learning attribute will not change past its initial configuration. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_addDENG Qingfang2021-02-101-1/+5
| | | | | | | | | | | | | | | | commit f72f2fb8fb6be095b98af5d740ac50cffd0b0cae upstream. Having multiple destination ports for a unicast address does not make sense. Make port_db_load_purge override existent unicast portvec instead of adding a new port bit. Fixes: 884729399260 ("net: dsa: mv88e6xxx: handle multiple ports in ATU") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: put device node before returnPan Bian2021-02-071-2/+6
| | | | | | | | | | | | commit cf3c46631e1637582f517a574c77cd6c05793817 upstream. Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: fix an off by one in checking "vlan->vid"Dan Carpenter2021-01-271-1/+1
| | | | | | | | | | | | | | | | | commit 8e4052c32d6b4b39c1e13c652c7e33748d447409 upstream. The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes2021-01-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 87fe04367d842c4d97a77303242d4dd4ac351e46 upstream. mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbEAleksander Jan Bajkowski2021-01-171-3/+4
| | | | | | | | | | | | | | [ Upstream commit 3545454c7801e391b0d966f82c98614d45394770 ] Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210107195818.3878-1-olek2@wp.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register accessMartin Blumenstingl2021-01-121-17/+6
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 709a3c9dff2a639966ae7d8ba6239d2b8aba036d ] There is one GSWIP_MII_CFG register for each switch-port except the CPU port. The register offset for the first port is 0x0, 0x02 for the second, 0x04 for the third and so on. Update the driver to not only restrict the GSWIP_MII_CFG registers to ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This means we are not overwriting the configuration for the third port (port two since we start counting from zero) with the settings for the sixth port (with number five) anymore. The GSWIP_MII_PCDU(p) registers are not updated because there's really only three (one for each of the following ports: 0, 1, 5). Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYsMartin Blumenstingl2021-01-121-3/+1
| | | | | | | | | | | | | | | | [ Upstream commit c1a9ec7e5d577a9391660800c806c53287fca991 ] Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow. Without this the PHY link is detected properly and ethtool statistics for TX are increasing but there's no RX traffic coming in. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Suggested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mv88e6xxx: Wait for EEPROM done after HW resetAndrew Lunn2020-12-023-0/+34
| | | | | | | | | | | | | | | | | [ Upstream commit a3dcb3e7e70c72a68a79b30fc3a3adad5612731c ] When the switch is hardware reset, it reads the contents of the EEPROM. This can contain instructions for programming values into registers and to perform waits between such programming. Reading the EEPROM can take longer than the 100ms mv88e6xxx_hardware_reset() waits after deasserting the reset GPIO. So poll the EEPROM done bit to ensure it is complete. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ruslan Sushko <rus@sushko.dev> Link: https://lore.kernel.org/r/20201116164301.977661-1-rus@sushko.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: lantiq: Wait for the GPHY firmware to be readyMartin Blumenstingl2020-11-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2a1828e378c1b5ba1ff283ed8f8c5cc37bb391dc ] A user reports (slightly shortened from the original message): libphy: lantiq,xrx200-mdio: probed mdio_bus 1e108000.switch-mii: MDIO device at address 17 is missing. gswip 1e108000.switch lan: no phy at 2 gswip 1e108000.switch lan: failed to connect to port 2: -19 lantiq,xrx200-net 1e10b308.eth eth0: error -19 setting up slave phy This is a single-port board using the internal Fast Ethernet PHY. The user reports that switching to PHY scanning instead of configuring the PHY within device-tree works around this issue. The documentation for the standalone variant of the PHY11G (which is probably very similar to what is used inside the xRX200 SoCs but having the firmware burnt onto that standalone chip in the factory) states that the PHY needs 300ms to be ready for MDIO communication after releasing the reset. Add a 300ms delay after initializing all GPHYs to ensure that the GPHY firmware had enough time to initialize and to appear on the MDIO bus. Unfortunately there is no (known) documentation on what the minimum time to wait after releasing the reset on an internal PHY so play safe and take the one for the external variant. Only wait after the last GPHY firmware is loaded to not slow down the initialization too much ( xRX200 has two GPHYs but newer SoCs have at least three GPHYs). Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201115165757.552641-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mv88e6xxx: Avoid VTU corruption on 6097Tobias Waldekranz2020-11-241-10/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 92307069a96c07d9b6e74b96b79390e7cd7d2111 ] As soon as you add the second port to a VLAN, all other port membership configuration is overwritten with zeroes. The HW interprets this as all ports being "unmodified members" of the VLAN. In the simple case when all ports belong to the same VLAN, switching will still work. But using multiple VLANs or trying to set multiple ports as tagged members will not work. On the 6352, doing a VTU GetNext op, followed by an STU GetNext op will leave you with both the member- and state- data in the VTU/STU data registers. But on the 6097 (which uses the same implementation), the STU GetNext will override the information gathered from the VTU GetNext. Separate the two stages, parsing the result of the VTU GetNext before doing the STU GetNext. We opt to update the existing implementation for all applicable chips, as opposed to creating a separate callback for 6097, because although the previous implementation did work for (at least) 6352, the datasheet does not mention the masking behavior. Fixes: ef6fcea37f01 ("net: dsa: mv88e6xxx: get STU entry on VTU GetNext") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20201112114335.27371-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: rtl8366rb: Support all 4096 VLANsLinus Walleij2020-10-291-1/+1
| | | | | | | | | | | | | | [ Upstream commit a7920efdd86d8a0d74402dbc80ead03b023294ba ] There is an off-by-one error in rtl8366rb_is_vlan_valid() making VLANs 0..4094 valid while it should be 1..4095. Fix it. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: rtl8366: Skip PVID setting if not requestedLinus Walleij2020-10-291-0/+3
| | | | | | | | | | | | | [ Upstream commit 3dfe8dde093a07e82fa472c0f8c29a7f6a2006a5 ] We go to lengths to determine whether the PVID should be set for this port or not, and then fail to take it into account. Fix this oversight. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: rtl8366: Refactor VLAN/PVID initLinus Walleij2020-10-292-131/+146
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7e1301ed1881447d2a25f9c6423738c33cbca133 ] The VLANs and PVIDs on the RTL8366 utilizes a "member configuration" (MC) which is largely unexplained in the code. This set-up requires a special ordering: rtl8366_set_pvid() must be called first, followed by rtl8366_set_vlan(), else the MC will not be properly allocated. Relax this by factoring out the code obtaining an MC and reuse the helper in both rtl8366_set_pvid() and rtl8366_set_vlan() so we remove this strict ordering requirement. In the process, add some better comments and debug prints so people who read the code understand what is going on. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: rtl8366: Check validity of passed VLANsLinus Walleij2020-10-291-0/+6
| | | | | | | | | | | | | | [ Upstream commit 6641a2c42b0a307b7638d10e5d4b90debc61389d ] The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid VLANs tossed at it, especially VLAN0, something the hardware and driver cannot handle. Check validity and bail out like we do in the other callbacks. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: rtl8366: Properly clear member configLinus Walleij2020-09-261-7/+13
| | | | | | | | | | | | | | | | | | [ Upstream commit 4ddcaf1ebb5e4e99240f29d531ee69d4244fe416 ] When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "net: dsa: microchip: set the correct number of ports"Sasha Levin2020-09-092-6/+0
| | | | | | | | | | This reverts commit d55dad8b1d893fae0c4e778abf2ace048bcbad86. Upstream commit af199a1a9cb0 ("net: dsa: microchip: set the correct number of ports") seems to have been applied twice on top of the 5.4 branch. This revert the second instance of said commit. Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: mt7530: fix advertising unsupported 1000baseT_HalfLanden Chao2020-09-091-1/+1
| | | | | | | | | | | | | | [ Upstream commit f272285f6abb9178d029375599626baf3d5f4e8a ] Remove 1000baseT_Half to advertise correct hardware capability in phylink_validate() callback function. Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: b53: check for timeoutTom Rix2020-08-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ] clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: rtl8366: Fix VLAN set-upLinus Walleij2020-08-191-7/+7
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 788abc6d9d278ed6fa1fa94db2098481a04152b7 ] Alter the rtl8366_vlan_add() to call rtl8366_set_vlan() inside the loop that goes over all VIDs since we now properly support calling that function more than once. Augment the loop to postincrement as this is more intuitive. The loop moved past the last VID but called rtl8366_set_vlan() with the port number instead of the VID, assuming a 1-to-1 correspondence between ports and VIDs. This was also a bug. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: rtl8366: Fix VLAN semanticsLinus Walleij2020-08-191-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 15ab7906cc9290afb006df1bb1074907fbcc7061 ] The RTL8366 would not handle adding new members (ports) to a VLAN: the code assumed that ->port_vlan_add() was only called once for a single port. When intializing the switch with .configure_vlan_while_not_filtering set to true, the function is called numerous times for adding all ports to VLAN1, which was something the code could not handle. Alter rtl8366_set_vlan() to just |= new members and untagged flags to 4k and MC VLAN table entries alike. This makes it possible to just add new ports to a VLAN. Put in some helpful debug code that can be used to find any further bugs here. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: mv88e6xxx: MV88E6097 does not support jumbo configurationChris Packham2020-08-191-1/+0
| | | | | | | | | | | | | | | [ Upstream commit 0f3c66a3c7b4e8b9f654b3c998e9674376a51b0f ] The MV88E6097 chip does not support configuring jumbo frames. Prior to commit 5f4366660d65 only the 6352, 6351, 6165 and 6320 chips configured jumbo mode. The refactor accidentally added the function for the 6097. Remove the erroneous function pointer assignment. Fixes: 5f4366660d65 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: microchip: call phy_remove_link_mode during probeHelmut Grohne2020-07-293-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3506b2f42dff66ea6814c3dfa1988bafb79e6f88 ] When doing "ip link set dev ... up" for a ksz9477 backed link, ksz9477_phy_setup is called and it calls phy_remove_link_mode to remove 1000baseT HDX. During phy_remove_link_mode, phy_advertise_supported is called. Doing so reverts any previous change to advertised link modes e.g. using a udevd .link file. phy_remove_link_mode is not meant to be used while opening a link and should be called during phy probe when the link is not yet available to userspace. Therefore move the phy_remove_link_mode calls into ksz9477_switch_register. It indirectly calls dsa_register_switch, which creates the relevant struct phy_devices and we update the link modes right after that. At that time dev->features is already initialized by ksz9477_switch_detect. Remove phy_setup from ksz_dev_ops as no users remain. Link: https://lore.kernel.org/netdev/20200715192722.GD1256692@lunn.ch/ Fixes: 42fc6a4c613019 ("net: dsa: microchip: prepare PHY for proper advertisement") Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: bcm_sf2: Fix node reference countFlorian Fainelli2020-07-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8dbe4c5d5e40fe140221024f7b16bec9f310bf70 ] of_find_node_by_name() will do an of_node_put() on the "from" argument. With CONFIG_OF_DYNAMIC enabled which checks for device_node reference counts, we would be getting a warning like this: [ 6.347230] refcount_t: increment on 0; use-after-free. [ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156 refcount_inc_checked+0x38/0x44 [ 6.360601] Modules linked in: [ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W 5.4.46-gb78b3e9956e6 #13 [ 6.372546] Hardware name: BCM97278SV (DT) [ 6.376649] Workqueue: events deferred_probe_work_func [ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO) [ 6.386595] pc : refcount_inc_checked+0x38/0x44 [ 6.391133] lr : refcount_inc_checked+0x38/0x44 ... [ 6.478791] Call trace: [ 6.481243] refcount_inc_checked+0x38/0x44 [ 6.485433] kobject_get+0x3c/0x4c [ 6.488840] of_node_get+0x24/0x34 [ 6.492247] of_irq_find_parent+0x3c/0xe0 [ 6.496263] of_irq_parse_one+0xe4/0x1d0 [ 6.500191] irq_of_parse_and_map+0x44/0x84 [ 6.504381] bcm_sf2_sw_probe+0x22c/0x844 [ 6.508397] platform_drv_probe+0x58/0xa8 [ 6.512413] really_probe+0x238/0x3fc [ 6.516081] driver_probe_device+0x11c/0x12c [ 6.520358] __device_attach_driver+0xa8/0x100 [ 6.524808] bus_for_each_drv+0xb4/0xd0 [ 6.528650] __device_attach+0xd0/0x164 [ 6.532493] device_initial_probe+0x24/0x30 [ 6.536682] bus_probe_device+0x38/0x98 [ 6.540524] deferred_probe_work_func+0xa8/0xd4 [ 6.545061] process_one_work+0x178/0x288 [ 6.549078] process_scheduled_works+0x44/0x48 [ 6.553529] worker_thread+0x218/0x270 [ 6.557285] kthread+0xdc/0xe4 [ 6.560344] ret_from_fork+0x10/0x18 [ 6.563925] ---[ end trace 68f65caf69bb152a ]--- Fix this by adding a of_node_get() to increment the reference count prior to the call. Fixes: afa3b592953b ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: microchip: set the correct number of portsCodrin Ciubotariu2020-07-222-0/+6
| | | | | | | | | | | | | | | | [ Upstream commit af199a1a9cb02ec0194804bd46c174b6db262075 ] The number of ports is incorrectly set to the maximum available for a DSA switch. Even if the extra ports are not used, this causes some functions to be called later, like port_disable() and port_stp_state_set(). If the driver doesn't check the port index, it will end up modifying unknown registers. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: microchip: set the correct number of portsCodrin Ciubotariu2020-07-162-0/+6
| | | | | | | | | | | | | | | | [ Upstream commit af199a1a9cb02ec0194804bd46c174b6db262075 ] The number of ports is incorrectly set to the maximum available for a DSA switch. Even if the extra ports are not used, this causes some functions to be called later, like port_disable() and port_stp_state_set(). If the driver doesn't check the port index, it will end up modifying unknown registers. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: lantiq_gswip: fix and improve the unsupported interface errorMartin Blumenstingl2020-06-241-1/+2
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4d3da2d8d91f66988a829a18a0ce59945e8ae4fb ] While trying to use the lantiq_gswip driver on one of my boards I made a mistake when specifying the phy-mode (because the out-of-tree driver wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the following error is printed multiple times: Unsupported interface: 3 While it gives at least a hint at what may be wrong it is not very user friendly. Print the human readable phy-mode and also which port is configured incorrectly (this hardware supports ports 0..6) to improve the cases where someone made a mistake. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: mt7530: set CPU port to fallback modeDENG Qingfang2020-06-072-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 upstream. Currently, setting a bridge's self PVID to other value and deleting the default VID 1 renders untagged ports of that VLAN unable to talk to the CPU port: bridge vlan add dev br0 vid 2 pvid untagged self bridge vlan del dev br0 vid 1 self bridge vlan add dev sw0p0 vid 2 pvid untagged bridge vlan del dev sw0p0 vid 1 # br0 cannot send untagged frames out of sw0p0 anymore That is because the CPU port is set to security mode and its PVID is still 1, and untagged frames are dropped due to VLAN member violation. Set the CPU port to fallback mode so untagged frames can pass through. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mt7530: fix roaming from DSA user portsDENG Qingfang2020-06-032-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5e5502e012b8129e11be616acb0f9c34bc8f8adb ] When a client moves from a DSA user port to a software port in a bridge, it cannot reach any other clients that connected to the DSA user ports. That is because SA learning on the CPU port is disabled, so the switch ignores the client's frames from the CPU port and still thinks it is at the user port. Fix it by enabling SA learning on the CPU port. To prevent the switch from learning from flooding frames from the CPU port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames, and let the switch flood them instead of trapping to the CPU port. Multicast frames still need to be trapped to the CPU port for snooping, so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames to disable SA learning. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: loop: Add module soft dependencyFlorian Fainelli2020-05-201-0/+1
| | | | | | | | | | | | | | [ Upstream commit 3047211ca11bf77b3ecbce045c0aa544d934b945 ] There is a soft dependency against dsa_loop_bdinfo.ko which sets up the MDIO device registration, since there are no symbols referenced by dsa_loop.ko, there is no automatic loading of dsa_loop_bdinfo.ko which is needed. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVLFlorian Fainelli2020-04-292-0/+5
| | | | | | | | | | | | | [ Upstream commit 64fec9493f7dc9bdd7233bcfe98985c45bd0e3c1 ] Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status, the default is to perform Shared VLAN learning instead of Individual learning. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: Rework ARL bin logicFlorian Fainelli2020-04-292-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ] When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: Fix ARL register definitionsFlorian Fainelli2020-04-291-2/+2
| | | | | | | | | | | | | | [ Upstream commit c2e77a18a7ed65eb48f6e389b6a59a0fd753646a ] The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: Fix valid setting for MDB entriesFlorian Fainelli2020-04-291-1/+0
| | | | | | | | | | | | | | | | | [ Upstream commit eab167f4851a19c514469dfa81147f77e17b5b20 ] When support for the MDB entries was added, the valid bit was correctly changed to be assigned depending on the remaining port bitmask, that is, if there were no more ports added to the entry's port bitmask, the entry now becomes invalid. There was another assignment a few lines below that would override this which would invalidate entries even when there were still multiple ports left in the MDB entry. Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: Lookup VID in ARL searches when VLAN is enabledFlorian Fainelli2020-04-291-0/+3
| | | | | | | | | | | | | | [ Upstream commit 2e97b0cd1651a270f3a3fcf42115c51f3284c049 ] When VLAN is enabled, and an ARL search is issued, we also need to compare the full {MAC,VID} tuple before returning a successful search result. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: Fix overflow checksFlorian Fainelli2020-04-231-6/+3
| | | | | | | | | | | | | | | | | | | | commit d0802dc411f469569a537283b6f3833af47aece9 upstream. Commit f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") tried to fix the some user controlled buffer overflows in bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is not representative of what the device actually supports. Correct that by using bcm_sf2_cfp_rule_size() instead. The latter subtracts the number of rules by 1, so change the checks from greater than or equal to greater than accordingly. Fixes: f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mt7530: move mt7623 settings out off the mt7530René van Dorst2020-04-212-95/+0
| | | | | | | | | | | | | | | [ Upstream commit 84d2f7b708c374a15a2abe092a74e0e47d018286 ] Moving mt7623 logic out off mt7530, is required to make hardware setting consistent after we introduce phylink to mtk driver. Fixes: ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK API") Reviewed-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware modeDENG Qingfang2020-04-212-6/+19
| | | | | | | | | | | | | | | [ Upstream commit e045124e93995fe01e42ed530003ddba5d55db4f ] In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN Control register must be set to Consistent to let tagged frames pass through as is, otherwise their tags will be stripped. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mt7530: fix null pointer dereferencing in port5 setupChuanhong Guo2020-04-131-0/+3
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0452800f6db4ed0a42ffb15867c0acfd68829f6a ] The 2nd gmac of mediatek soc ethernet may not be connected to a PHY and a phy-handle isn't always available. Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always connected to switch port 5 and setup mt7530 according to phy address of 2nd gmac node, causing null pointer dereferencing when phy-handle isn't defined in dts. This commit fix this setup code by checking return value of of_parse_phandle before using it. Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: Ensure correct sub-node is parsedFlorian Fainelli2020-04-131-1/+6
| | | | | | | | | | | | | | | | | [ Upstream commit afa3b592953bfaecfb4f2f335ec5f935cff56804 ] When the bcm_sf2 was converted into a proper platform device driver and used the new dsa_register_switch() interface, we would still be parsing the legacy DSA node that contained all the port information since the platform firmware has intentionally maintained backward and forward compatibility to client programs. Ensure that we do parse the correct node, which is "ports" per the revised DSA binding. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: Do not register slave MDIO bus with OFFlorian Fainelli2020-04-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 536fab5bf5826404534a6c271f622ad2930d9119 ] We were registering our slave MDIO bus with OF and doing so with assigning the newly created slave_mii_bus of_node to the master MDIO bus controller node. This is a bad thing to do for a number of reasons: - we are completely lying about the slave MII bus is arranged and yet we still want to control which MDIO devices it probes. It was attempted before to play tricks with the bus_mask to perform that: https://www.spinics.net/lists/netdev/msg429420.html but the approach was rightfully rejected - the device_node reference counting is messed up and we are effectively doing a double probe on the devices we already probed using the master, this messes up all resources reference counts (such as clocks) The proper fix for this as indicated by David in his reply to the thread above is to use a platform data style registration so as to control exactly which devices we probe: https://www.spinics.net/lists/netdev/msg430083.html By using mdiobus_register(), our slave_mii_bus->phy_mask value is used as intended, and all the PHY addresses that must be redirected towards our slave MDIO bus is happening while other addresses get redirected towards the master MDIO bus. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mt7530: Change the LINK bit to reflect the link statusRené van Dorst2020-04-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 22259471b51925353bd7b16f864c79fdd76e425e ] Andrew reported: After a number of network port link up/down changes, sometimes the switch port gets stuck in a state where it thinks it is still transmitting packets but the cpu port is not actually transmitting anymore. In this state you will see a message on the console "mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter in ifconfig will be incrementing on virtual port, but not incrementing on cpu port. The issue is that MAC TX/RX status has no impact on the link status or queue manager of the switch. So the queue manager just queues up packets of a disabled port and sends out pause frames when the queue is full. Change the LINK bit to reflect the link status. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reported-by: Andrew Smith <andrew.smith@digi.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: mv88e6xxx: fix lockup on warm bootRussell King2020-03-181-1/+7
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0395823b8d9a4d87bd1bf74359123461c2ae801b ] If the switch is not hardware reset on a warm boot, interrupts can be left enabled, and possibly pending. This will cause us to enter an infinite loop trying to service an interrupt we are unable to handle, thereby preventing the kernel from booting. Ensure that the global 2 interrupt sources are disabled before we claim the parent interrupt. Observed on the ZII development revision B and C platforms with reworked serdes support, and using reboot -f to reboot the platform. Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/secFlorian Fainelli2020-03-121-2/+1
| | | | | | | | | | | | | | | | [ Upstream commit 98c5f7d44fef309e692c24c6d71131ee0f0871fb ] We are still experiencing some packet loss with the existing advanced congestion buffering (ACB) settings with the IMP port configured for 2Gb/sec, so revert to conservative link speeds that do not produce packet loss until this is resolved. Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: b53: Ensure the default VID is untaggedFlorian Fainelli2020-03-051-0/+3
| | | | | | | | | | | | | | | [ Upstream commit d965a5432d4c3e6b9c3d2bc1d4a800013bbf76f6 ] We need to ensure that the default VID is untagged otherwise the switch will be sending tagged frames and the results can be problematic. This is especially true with b53 switches that use VID 0 as their default VLAN since VID 0 has a special meaning. Fixes: fea83353177a ("net: dsa: b53: Fix default VLAN ID") Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: microchip: enable module autoprobeRazvan Stefanescu2020-02-111-0/+6
| | | | | | | | | | | | | | | | | [ Upstream commit f8c2afa66d5397b0b9293c4347dac6dabb327685 ] This matches /sys/devices/.../spi1.0/modalias content. Fixes: 9b2d9f05cddf ("net: dsa: microchip: add ksz9567 to ksz9477 driver") Fixes: d9033ae95cf4 ("net: dsa: microchip: add KSZ8563 compatibility string") Fixes: 8c29bebb1f8a ("net: dsa: microchip: add KSZ9893 switch support") Fixes: 45316818371d ("net: dsa: add support for ksz9897 ethernet switch") Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP portFlorian Fainelli2020-02-111-1/+3
| | | | | | | | | | | | | [ Upstream commit de34d7084edd069dac5aa010cfe32bd8c4619fa6 ] The 7445 switch clocking profiles do not allow us to run the IMP port at 2Gb/sec in a way that it is reliable and consistent. Make sure that the setting is only applied to the 7278 family. Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: Always use dev->vlan_enabled in b53_configure_vlan()Florian Fainelli2020-02-111-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit df373702bc0f8f2d83980ea441e71639fc1efcf8 ] b53_configure_vlan() is called by the bcm_sf2 driver upon setup and indirectly through resume as well. During the initial setup, we are guaranteed that dev->vlan_enabled is false, so there is no change in behavior, however during suspend, we may have enabled VLANs before, so we do want to restore that setting. Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-25 13:51:49 +0000