summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: mt7530: fix handling of 802.1X PAE framesArınç ÜNAL2023-08-192-0/+6
| | | | | | | | | | | | 802.1X PAE frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as regular multicast frames, therefore flooding them to user ports. To fix this, set 802.1X PAE frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: felix: fix oversize frame dropping for always closed tc-taprio gatesVladimir Oltean2023-08-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The blamed commit resolved a bug where frames would still get stuck at egress, even though they're smaller than the maxSDU[tc], because the driver did not take into account the extra 33 ns that the queue system needs for scheduling the frame. It now takes that into account, but the arithmetic that we perform in vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on 64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS may become a very large integer if gate_len_ns < 33 ns. In practice, this means that we've introduced a regression where all traffic class gates which are permanently closed will not get detected by the driver, and we won't enable oversize frame dropping for them. Before: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS After: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: mv88e6xxx: Wait for EEPROM done before HW resetAlfred Lee2023-08-161-0/+8
| | | | | | | | | | | | | | | | If the switch is reset during active EEPROM transactions, as in just after an SoC reset after power up, the I2C bus transaction may be cut short leaving the EEPROM internal I2C state machine in the wrong state. When the switch is reset again, the bad state machine state may result in data being read from the wrong memory location causing the switch to enter unexpected mode rendering it inoperational. Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset") Signed-off-by: Alfred Lee <l00g33k@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on ↵Vladimir Oltean2023-08-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | driver remove When the tagging protocol in current use is "ocelot-8021q" and we unbind the driver, we see this splat: $ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind mscc_felix 0000:00:00.5 swp0: left promiscuous mode sja1105 spi2.0: Link is Down DSA: tree 1 torn down mscc_felix 0000:00:00.5 swp2: left promiscuous mode sja1105 spi2.2: Link is Down DSA: tree 3 torn down fsl_enetc 0000:00:00.2 eno2: left promiscuous mode mscc_felix 0000:00:00.5: Link is Down ------------[ cut here ]------------ RTNL: assertion failed at net/dsa/tag_8021q.c (409) WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0 Modules linked in: CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771 pc : dsa_tag_8021q_unregister+0x12c/0x1a0 lr : dsa_tag_8021q_unregister+0x12c/0x1a0 Call trace: dsa_tag_8021q_unregister+0x12c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ RTNL: assertion failed at net/8021q/vlan_core.c (376) WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0 CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771 pc : vlan_vid_del+0x1b8/0x1f0 lr : vlan_vid_del+0x1b8/0x1f0 dsa_tag_8021q_unregister+0x8c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 DSA: tree 0 torn down This was somewhat not so easy to spot, because "ocelot-8021q" is not the default tagging protocol, and thus, not everyone who tests the unbinding path may have switched to it beforehand. The default felix_tag_npi_teardown() does not require rtnl_lock() to be held. Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundariesLukasz Majewski2023-07-291-20/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit (SHA1: 5c844d57aa7894154e49cf2fc648bfe2f1aefc1c) provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9477 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: fix value check in bcm_sf2_sw_probe()Yuanjun Gong2023-07-271-2/+6
| | | | | | | | | | | | in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi2023-07-261-0/+6
| | | | | | | | | | | | | | The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: qca8k: fix broken search_and_delChristian Marangi2023-07-261-0/+4
| | | | | | | | | | | | | | | | | | | | On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: qca8k: fix search_and_insert wrong handling of new ruleChristian Marangi2023-07-261-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | On inserting a mdb entry, fdb_search_and_insert is used to add a port to the qca8k target entry in the FDB db. A FDB entry can't be modified so it needs to be removed and insert again with the new values. To detect if an entry already exist, the SEARCH operation is used and we check the aging of the entry. If the entry is not 0, the entry exist and we proceed to delete it. Current code have 2 main problem: - The condition to check if the FDB entry exist is wrong and should be the opposite. - When a FDB entry doesn't exist, aging was never actually set to the STATIC value resulting in allocating an invalid entry. Fix both problem by adding aging support to the function, calling the function with STATIC as aging by default and finally by correct the condition to check if the entry actually exist. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: qca8k: enable use_single_write for qca8xxxChristian Marangi2023-07-261-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qca8xxx switch supports 2 way to write reg values, a slow way using mdio and a fast way by sending specially crafted mgmt packet to read/write reg. The fast way can support up to 32 bytes of data as eth packet are used to send/receive. This correctly works for almost the entire regmap of the switch but with the use of some kernel selftests for dsa drivers it was found a funny and interesting hw defect/limitation. For some specific reg, bulk write won't work and will result in writing only part of the requested regs resulting in half data written. This was especially hard to track and discover due to the total strangeness of the problem and also by the specific regs where this occurs. This occurs in the specific regs of the ATU table, where multiple entry needs to be written to compose the entire entry. It was discovered that with a bulk write of 12 bytes on QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2 were written, but QCA8K_REG_ATU_DATA1 was always zero. Tcpdump was used to make sure the specially crafted packet was correct and this was confirmed. The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1 resulted in an entry somehow possible as the first bytes of the mac address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in QCA8K_REG_ATU_DATA2. Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and QCA8K_REG_ATU_FUNC correctly written. A speculation on the problem might be that there are some kind of indirection internally when accessing these regs and they can't be accessed all together, due to the fact that it's really a table mapped somewhere in the switch SRAM. Even more funny is the fact that every other reg was tested with all kind of combination and they are not affected by this problem. Read operation was also tested and always worked so it's not affected by this problem. The problem is not present if we limit writing a single reg at times. To handle this hardware defect, enable use_single_write so that bulk api can correctly split the write in multiple different operation effectively reverting to a non-bulk write. Cc: Mark Brown <broonie@kernel.org> Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: correct KSZ8795 static MAC table accessTristram Ha2023-07-173-5/+18
| | | | | | | | | | | | | | | | | | | The KSZ8795 driver code was modified to use on KSZ8863/73, which has different register definitions. Some of the new KSZ8795 register information are wrong compared to previous code. KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading than writing. To compensate that a special code was added to shift the register value by 1 before applying those bits. This is wrong when the code is running on KSZ8863, so this special code is only executed when KSZ8795 is detected. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: ar9331: Use explict flags for regmap single read/writeMark Brown2023-07-141-2/+2
| | | | | | | | | | | | | | | The at9331 is only able to read or write a single register at once. The driver has a custom regmap bus and chooses to tell the regmap core about this by reporting the maximum transfer sizes rather than the explicit flags that exist at the regmap level. Since there are a number of problems with the raw transfer limits and the regmap level flags are better integrated anyway convert the driver to use the flags. No functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: mv88e6xxx: Do a final check before timing outLinus Walleij2023-07-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I get sporadic timeouts from the driver when using the MV88E6352. Reading the status again after the loop fixes the problem: the operation is successful but goes undetected. Some added prints show things like this: [ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1b reg 0b, mask 8000, val 0000, data c000 [ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for ATU op 4000, fid 0001 (...) [ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1c reg 18, mask 8000, val 0000, data 9860 [ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting for PHY command 1860 to complete The reason is probably not the commands: I think those are mostly fine with the 50+50ms timeout, but the problem appears when OpenWrt brings up several interfaces in parallel on a system with 7 populated ports: if one of them take more than 50 ms and waits one or more of the others can get stuck on the mutex for the switch and then this can easily multiply. As we sleep and wait, the function loop needs a final check after exiting the loop if we were successful. Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: Tobias Waldekranz <tobias@waldekranz.com> Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: Removed unneeded of_node_put in felix_parse_ports_nodeLu Hongfei2023-07-111-1/+0
| | | | | | | | | | | | Remove unnecessary of_node_put from the continue path to prevent child node from being released twice, which could avoid resource leak or other unexpected issues. Signed-off-by: Lu Hongfei <luhongfei@vivo.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: de879a016a94 ("net: dsa: felix: add functionality when not all ports are supported") Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dsa: qca8k: Add check for skb_copyJiasheng Jiang2023-07-101-0/+3
| | | | | | | | | | Add check for the return value of skb_copy in order to avoid NULL pointer dereference. Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mscc: ocelot: fix oversize frame dropping for preemptible TCsVladimir Oltean2023-07-061-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This switch implements Hold/Release in a strange way, with no control from the user as required by IEEE 802.1Q-2018 through Set-And-Hold-MAC and Set-And-Release-MAC, but rather, it emits HOLD requests implicitly based on the schedule. Namely, when the gate of a preemptible TC is about to close (actually QSYS::PREEMPTION_CFG.HOLD_ADVANCE octet times in advance of this event), the QSYS seems to emit a HOLD request pulse towards the MAC which preempts the currently transmitted packet, and further packets are held back in the queue system. This allows large frames to be squeezed through small time slots, because HOLD requests initiated by the gate events result in the frame being segmented in multiple fragments, the bit time of which is equal to the size of the time slot. It has been reported that the vsc9959_tas_guard_bands_update() logic breaks this, because it doesn't take preemptible TCs into account, and enables oversized frame dropping when the time slot doesn't allow a full MTU to be sent, but it does allow 2*minFragSize to be sent (128B). Packets larger than 128B are dropped instead of being sent in multiple fragments. Confusingly, the manual says: | For guard band, SDU calculation of a traffic class of a port, if | preemption is enabled (through 'QSYS::PREEMPTION_CFG.P_QUEUES') then | QSYS::PREEMPTION_CFG.HOLD_ADVANCE is used, otherwise | QSYS::QMAXSDU_CFG_*.QMAXSDU_* is used. but this only refers to the static guard band durations, and the QMAXSDU_CFG_* registers have dual purpose - the other being oversized frame dropping, which takes place irrespective of whether frames are preemptible or express. So, to fix the problem, we need to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and modify the guard band logic to consider a different (lower) oversize limit for preemptible traffic classes. Fixes: 403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-4-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: felix: make vsc9959_tas_guard_bands_update() visible to ocelot->opsVladimir Oltean2023-07-063-5/+3
| | | | | | | | | | | | | | | | In a future change we will need to make ocelot_port_update_active_preemptible_tcs() call vsc9959_tas_guard_bands_update(), but that is currently not possible, since the ocelot switch lib does not have access to functions private to the DSA wrapper. Move the pointer to vsc9959_tas_guard_bands_update() from felix->info (which is private to the DSA driver) to ocelot->ops (which is also visible to the ocelot switch lib). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-3-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: mscc: ocelot: extend ocelot->fwd_domain_lock to cover ocelot->tas_lockVladimir Oltean2023-07-062-16/+24
| | | | | | | | | | | | | | | | | | In a future commit we will have to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and that will be impossible due to the AB/BA locking dependencies between ocelot->tas_lock and ocelot->fwd_domain_lock. Just like we did in commit 3ff468ef987e ("net: mscc: ocelot: remove struct ocelot_mm_state :: lock"), the only solution is to expand the scope of ocelot->fwd_domain_lock for it to also serialize changes made to the Time-Aware Shaper, because those will have to result in a recalculation of cut-through TCs, which is something that depends on the forwarding domain. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-2-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: sja1105: always enable the send_meta optionsVladimir Oltean2023-07-043-48/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless PTP RX timestamping is enabled. The incl_srcpt option was initially unconditionally enabled, then that changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that it now needs to be always enabled, otherwise the driver does not have a reliable source of information regarding source_port and switch_id for link-local traffic (tag_8021q VLANs may be imprecise since now they identify an entire bridging domain when ports are not standalone). If we accept that PTP RX timestamping (and therefore, meta frame generation) is always enabled in hardware, then that limitation could be avoided and packets with any MAC DA can be properly received, because meta frames do contain the original bytes from the MAC DA of their associated link-local packet. This change enables meta frame generation unconditionally, which also has the nice side effects of simplifying the switch control path (a switch reset is no longer required on hwtstamping settings change) and the tagger data path (it no longer needs to be informed whether to expect meta frames or not - it always does). Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: vsc73xx: fix MTU configurationPawel Dembicki2023-06-291-3/+3
| | | | | | | | | | | | | | | Switch in MAXLEN register stores the maximum size of a data frame. The MTU size is 18 bytes smaller than the frame size. The current settings are causing problems with packet forwarding. This patch fixes the MTU settings to proper values. Fixes: fb77ffc6ec86 ("net: dsa: vsc73xx: make the MTU configurable") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230628194327.1765644-1-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: sja1105: always enable the INCL_SRCPT optionVladimir Oltean2023-06-291-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Link-local traffic on bridged SJA1105 ports is sometimes tagged by the hardware with source port information (when the port is under a VLAN aware bridge). The tag_8021q source port identification has become more loose ("imprecise") and will report a plausible rather than exact bridge port, when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local traffic always needs to know the precise source port. Modify the driver logic (and therefore: the tagging protocol itself) to always include the source port information with link-local packets, regardless of whether the port is standalone, under a VLAN-aware or VLAN-unaware bridge. This makes it possible for the tagging driver to give priority to that information over the tag_8021q VLAN header. The big drawback with INCL_SRCPT is that it makes it impossible to distinguish between an original MAC DA of 01:80:C2:XX:YY:ZZ and 01:80:C2:AA:BB:ZZ, because the tagger just patches MAC DA bytes 3 and 4 with zeroes. Only if PTP RX timestamping is enabled, the switch will generate a META follow-up frame containing the RX timestamp and the original bytes 3 and 4 of the MAC DA. Those will be used to patch up the original packet. Nonetheless, in the absence of PTP RX timestamping, we have to live with this limitation, since it is more important to have the more precise source port information for link-local traffic. Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID") Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dsa: felix: don't drop PTP frames with tag_8021q when RX timestamping ↵Vladimir Oltean2023-06-291-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | is disabled The driver implements a workaround for the fact that it doesn't have an IRQ source to tell it whether PTP frames are available through the extraction registers, for those frames to be processed and passed towards the network stack. That workaround is to configure the switch, through felix_hwtstamp_set() -> felix_update_trapping_destinations(), to create two copies of PTP packets: one sent over Ethernet to the DSA master, and one to be consumed through the aforementioned CPU extraction queue registers. The reason why we want PTP packets to be consumed through the CPU extraction registers in the first place is because we want to see their hardware RX timestamp. With tag_8021q, that is only visible that way, and it isn't visible with the copy of the packet that's transmitted over Ethernet. The problem with the workaround implementation is that it drops the packet received over Ethernet, in expectation of its copy being present in the CPU extraction registers. However, if felix_hwtstamp_set() hasn't run (aka PTP RX timestamping is disabled), the driver will drop the original PTP frame and there will be no copy of it in the CPU extraction registers. So, the network stack will simply not see any PTP frame. Look at the port's trapping configuration to see whether the driver has previously enabled the CPU extraction registers. If it hasn't, just don't RX timestamp the frame and let it be passed up the stack by DSA, which is perfectly fine. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dsa: qca8k: add support for additional modes for netdev triggerChristian Marangi2023-06-221-0/+20
| | | | | | | | | | | | | | | | | | | | | The QCA8K switch supports additional modes that can be handled in hardware for the LED netdev trigger. Add these additional modes to further support the Switch LEDs and offload more blink modes. Add additional modes: - link_10 - link_100 - link_1000 - half_duplex - full_duplex Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230621095409.25859-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: fix writes to phy registers >= 0x10Rasmus Villemoes2023-06-221-1/+17
| | | | | | | | | | | | | | According to the errata sheets for ksz9477 and ksz9567, writes to the PHY registers 0x10-0x1f (i.e. those located at addresses 0xN120 to 0xN13f) must be done as a 32 bit write to the 4-byte aligned address containing the register, hence requires a RMW in order not to change the adjacent PHY register. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230620113855.733526-4-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: add ksz_prmw32() helperRasmus Villemoes2023-06-221-0/+7
| | | | | | | | | | | This will be used in a subsequent patch fixing an errata for writes to certain PHY registers. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20230620113855.733526-3-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: simplify ksz_prmw8()Rasmus Villemoes2023-06-221-11/+2
| | | | | | | | | | | Implement ksz_prmw8() in terms of ksz_rmw8(), just as all the other ksz_pX are implemented in terms of ksz_X. No functional change. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20230620113855.733526-2-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: mt7530: update PCS driver to use neg_modeRussell King (Oracle)2023-06-221-1/+2
| | | | | | | | | | Update mt7530's embedded PCS driver to use neg_mode, even though it makes no use of it or the "mode" argument. This makes the driver consistent with converted drivers. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qA8Ej-00EaGR-Fk@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: b53: update PCS driver to use neg_modeRussell King (Oracle)2023-06-221-1/+2
| | | | | | | | | | | Update B53's embedded PCS driver to use neg_mode, even though it makes no use of it or the "mode" argument. This makes the driver consistent with converted drivers. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/E1qA8Ee-00EaGL-Az@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: qca8k: update PCS driver to use neg_modeRussell King (Oracle)2023-06-221-7/+6
| | | | | | | | | | Update qca8k's embedded PCS driver to use neg_mode rather than the mode argument. As there is no pcs_link_up() method, this only affects the pcs_config() method. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qA8EU-00EaG9-1l@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: pcs: xpcs: update PCS driver to use neg_modeRussell King (Oracle)2023-06-221-8/+6
| | | | | | | | | | Update xpcs to use neg_mode to configure whether inband negotiation should be used. We need to update sja1105 as well as that directly calls into the XPCS driver's config function. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qA8Dt-00EaFS-W9@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-06-222-10/+44
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled") dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.") https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/ https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: dsa: introduce preferred_default_local_cpu_port and use on MT7530Vladimir Oltean2023-06-201-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the introduction of the OF bindings, DSA has always had a policy that in case multiple CPU ports are present in the device tree, the numerically smallest one is always chosen. The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because it has higher bandwidth. The MT7530 driver developers had 3 options: - to modify DSA when the MT7531 switch support was introduced, such as to prefer the better port - to declare both CPU ports in device trees as CPU ports, and live with the sub-optimal performance resulting from not preferring the better port - to declare just port 6 in the device tree as a CPU port Of course they chose the path of least resistance (3rd option), kicking the can down the road. The hardware description in the device tree is supposed to be stable - developers are not supposed to adopt the strategy of piecemeal hardware description, where the device tree is updated in lockstep with the features that the kernel currently supports. Now, as a result of the fact that they did that, any attempts to modify the device tree and describe both CPU ports as CPU ports would make DSA change its default selection from port 6 to 5, effectively resulting in a performance degradation visible to users with the MT7531BE switch as can be seen below. Without preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender [ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver With preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender [ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver Using one port for WAN and the other ports for LAN is a very popular use case which is what this test emulates. As such, this change proposes that we retroactively modify stable kernels (which don't support the modification of the CPU port assignments, so as to let user space fix the problem and restore the throughput) to keep the mt7530 driver preferring port 6 even with device trees where the hardware is more fully described. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: mt7530: fix handling of LLDP framesArınç ÜNAL2023-06-202-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | LLDP frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat LLDP frames as regular multicast frames, therefore flooding them to user ports. To fix this, set LLDP frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: mt7530: fix handling of BPDUs on MT7530 switchArınç ÜNAL2023-06-201-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BPDUs are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT7530 switch treats BPDUs as regular multicast frames, therefore flooding them to user ports. To fix this, set BPDUs to be trapped to the CPU port. Group this on mt7530_setup() and mt7531_setup_common() into mt753x_trap_frames() and call that. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: mt7530: fix trapping frames on non-MT7621 SoC MT7530 switchArınç ÜNAL2023-06-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | All MT7530 switch IP variants share the MT7530_MFC register, but the current driver only writes it for the switch variant that is integrated in the MT7621 SoC. Modify the code to include all MT7530 derivatives. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAPArınç ÜNAL2023-06-202-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU frames (further restricted by PCR_MATRIX). Currently the driver sets the first CPU port as the single port in this bit mask, which works fine regardless of whether the device tree defines port 5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's logic of picking the first CPU port as the CPU port that all user ports are affine to, by default. An upcoming change would like to influence DSA's selection of the default CPU port to no longer be the first one, and in that case, this logic needs adaptation. Since there is no observed leakage or duplication of frames if all CPU ports are defined in this bit mask, simply include them all. Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-06-151-1/+1
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo framesVladimir Oltean2023-06-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535. Plus 2 * VLAN_HLEN (4), that is up to 65543. The picos_per_byte variable is the largest when "speed" is lowest - SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000. Their product - 52434400000 - exceeds 32 bits, which is a problem, because apparently, a multiplication between two 32-bit factors is evaluated as 32-bit before being assigned to a 64-bit variable. In fact it's a problem for any MTU value larger than 5368. Cast one of the factors of the multiplication to u64 to force the multiplication to take place on 64 bits. Issue found by Coverity. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-06-082-4/+1
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()") net/ipv4/sysctl_net_ipv4.c e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294") ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear") https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: dsa: qca8k: add CONFIG_LEDS_TRIGGERS dependencyArnd Bergmann2023-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without LED triggers, the driver now fails to build: drivers/net/dsa/qca/qca8k-leds.c: In function 'qca8k_parse_port_leds': drivers/net/dsa/qca/qca8k-leds.c:403:31: error: 'struct led_classdev' has no member named 'hw_control_is_supported' 403 | port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported; | ^ There is a mix of 'depends on' and 'select' for LEDS_TRIGGERS, so it's not clear what we should use here, but in general using 'depends on' causes fewer problems, so use that. Fixes: e0256648c831a ("net: dsa: qca8k: implement hw_control ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: lan9303: allow vid != 0 in port_fdb_{add|del} methodsAlexander Sverdlin2023-06-011-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LAN9303 doesn't associate FDB (ALR) entries with VLANs, it has just one global Address Logic Resolution table [1]. Ignore VID in port_fdb_{add|del} methods, go on with the global table. This is the same semantics as hellcreek or RZ/N1 implement. Visible symptoms: LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to delete 00:xx:xx:xx:xx:cf vid 1 from fdb: -2 LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to add 00:xx:xx:xx:xx:cf vid 1 to fdb: -95 [1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002308A.pdf Fixes: 0620427ea0d6 ("net: dsa: lan9303: Add fdb/mdb manipulation") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230531143826.477267-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: dsa: mv88e6xxx: implement USXGMII mode for mv88e6393xMichal Smulski2023-06-074-4/+53
| | | | | | | | | | | | | | | | Enable USXGMII mode for mv88e6393x chips. Tested on Marvell 88E6191X. Signed-off-by: Michal Smulski <michal.smulski@ooma.com> Link: https://lore.kernel.org/r/20230605174442.12493-1-msmulski2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: dsa: qca8k: remove unnecessary (void*) conversionsAtin Bainada2023-06-073-12/+12
| | | | | | | | | | | | | | Pointer variables of (void*) type do not require type cast. Signed-off-by: Atin Bainada <hi@atinb.me> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: ocelot: unlock on error in vsc9959_qos_port_tas_set()Dan Carpenter2023-06-071-1/+2
| | | | | | | | | | | | | | | | | | | | This error path needs call mutex_unlock(&ocelot->tas_lock) before returning. Fixes: 2d800bc500fb ("net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enum") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: microchip: remove KSZ9477 PHY errata handlingRobert Hancock2023-06-063-75/+4
| | | | | | | | | | | | | | | | | | | | | | The KSZ9477 PHY errata handling code has now been moved into the Micrel PHY driver, so it is no longer needed inside the DSA switch driver. Remove it. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: dsa: sja1105: use xpcs_create_mdiodev()Russell King (Oracle)2023-06-051-9/+1
| | | | | | | | | | | | | | | | | | | | Use the new xpcs_create_mdiodev() creator, which simplifies the creation and destruction of the mdio device associated with xpcs. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: sja1105: allow XPCS to handle mdiodev lifetimeRussell King (Oracle)2023-06-051-2/+1
| | | | | | | | | | | | | | | | | | | | Put the mdiodev after xpcs_create() so that the XPCS driver can manage the lifetime of the mdiodev its using. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-06-011-1/+1
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/sfc/tc.c 622ab656344a ("sfc: fix error unwinds in TC offload") b6583d5e9e94 ("sfc: support TC decap rules matching on enc_src_port") net/mptcp/protocol.c 5b825727d087 ("mptcp: add annotations around msk->subflow accesses") e76c8ef5cc5b ("mptcp: refactor mptcp_stream_accept()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: dsa: mv88e6xxx: Increase wait after reset deactivationAndreas Svensson2023-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by: Andreas Svensson <andreas.svensson@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enumVladimir Oltean2023-05-313-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Inspired from struct flow_cls_offload :: cmd, in order for taprio to be able to report statistics (which is future work), it seems that we need to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) multiplexing, and pass the command as part of the common portion of the muxed structure. Since we already have an "enable" variable in tc_taprio_qopt_offload, refactor all drivers to check for "cmd" instead of "enable", and reject every other command except "replace" and "destroy" - to be future proof. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-07 23:07:56 +0000