summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice
Commit message (Collapse)AuthorAgeFilesLines
* ice: tc: check src_vsi in case of traffic from VFMichal Swiatkowski2024-04-161-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | In case of traffic going from the VF (so ingress for port representor) source VSI should be consider during packet classification. It is needed for hardware to not match packets from different ports with filters added on other port. It is only for "from VF" traffic, because other traffic direction doesn't have source VSI. Set correct ::src_vsi in rule_info to pass it to the hardware filter. For example this rule should drop only ipv4 packets from eth10, not from the others VF PRs. It is needed to check source VSI in this case. $tc filter add dev eth10 ingress protocol ip flower skip_sw action drop Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* ice: fix enabling RX VLAN filteringPetr Oros2024-04-031-10/+8
| | | | | | | | | | | | | | | | | | | ice_port_vlan_on/off() was introduced in commit 2946204b3fa8 ("ice: implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns ena_rx_filtering to inner_vlan_ops in DVM mode. This causes an error when rx_filtering cannot be enabled in legacy mode. Reproducer: echo 1 > /sys/class/net/$PF/device/sriov_numvfs ip link set $PF vf 0 spoofchk off trust on vlan 3 dmesg: ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95 Fixes: 2946204b3fa8 ("ice: implement bridge port vlan") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* ice: Fix freeing uninitialized pointersDan Carpenter2024-04-032-6/+6
| | | | | | | | | | | | Automatically cleaned up pointers need to be initialized before exiting their scope. In this case, they need to be initialized to NULL before any return statement. Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* Merge tag 'net-6.9-rc2' of ↵Linus Torvalds2024-03-285-24/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, WiFi and netfilter. Current release - regressions: - ipv6: fix address dump when IPv6 is disabled on an interface Current release - new code bugs: - bpf: temporarily disable atomic operations in BPF arena - nexthop: fix uninitialized variable in nla_put_nh_group_stats() Previous releases - regressions: - bpf: protect against int overflow for stack access size - hsr: fix the promiscuous mode in offload mode - wifi: don't always use FW dump trig - tls: adjust recv return with async crypto and failed copy to userspace - tcp: properly terminate timers for kernel sockets - ice: fix memory corruption bug with suspend and rebuild - at803x: fix kernel panic with at8031_probe - qeth: handle deferred cc1 Previous releases - always broken: - bpf: fix bug in BPF_LDX_MEMSX - netfilter: reject table flag and netdev basechain updates - inet_defrag: prevent sk release while still in use - wifi: pick the version of SESSION_PROTECTION_NOTIF - wwan: t7xx: split 64bit accesses to fix alignment issues - mlxbf_gige: call request_irq() after NAPI initialized - hns3: fix kernel crash when devlink reload during pf initialization" * tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) inet: inet_defrag: prevent sk release while still in use Octeontx2-af: fix pause frame configuration in GMP mode net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips net: bcmasp: Remove phy_{suspend/resume} net: bcmasp: Bring up unimac after PHY link up net: phy: qcom: at803x: fix kernel panic with at8031_probe netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c netfilter: nf_tables: skip netdev hook unregistration if table is dormant netfilter: nf_tables: reject table flag and netdev basechain updates netfilter: nf_tables: reject destroy command to remove basechain hooks bpf: update BPF LSM designated reviewer list bpf: Protect against int overflow for stack access size bpf: Check bloom filter map value size bpf: fix warning for crash_kexec selftests: netdevsim: set test timeout to 10 minutes net: wan: framer: Add missing static inline qualifiers mlxbf_gige: call request_irq() after NAPI initialized tls: get psock ref after taking rxlock to avoid leak selftests: tls: add test with a partially invalid iov tls: adjust recv return with async crypto and failed copy to userspace ...
| * ice: fix memory corruption bug with suspend and rebuildJesse Brandeburg2024-03-251-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.418614] ice_vsi_rebuild+0x34b/0x3c0 [ice] [1026677.423583] ice_vsi_rebuild_by_type+0x76/0x180 [ice] [1026677.429147] ice_rebuild+0x18b/0x520 [ice] [1026677.433746] ? delay_tsc+0x8f/0xc0 [1026677.437630] ice_do_reset+0xa3/0x190 [ice] [1026677.442231] ice_service_task+0x26/0x440 [ice] [1026677.447180] process_one_work+0x174/0x340 [1026677.451669] worker_thread+0x27e/0x390 [1026677.455890] ? __pfx_worker_thread+0x10/0x10 [1026677.460627] kthread+0xee/0x120 [1026677.464235] ? __pfx_kthread+0x10/0x10 [1026677.468445] ret_from_fork+0x2d/0x50 [1026677.472476] ? __pfx_kthread+0x10/0x10 [1026677.476671] ret_from_fork_asm+0x1b/0x30 [1026677.481050] </TASK> Fixes: b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") Reported-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: Refactor FW data type and fix bitmap casting issueSteven Zou2024-03-254-15/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the datasheet, the recipe association data is an 8-byte little-endian value. It is described as 'Bitmap of the recipe indexes associated with this profile', it is from 24 to 31 byte area in FW. Therefore, it is defined to '__le64 recipe_assoc' in struct ice_aqc_recipe_to_profile. And then fix the bitmap casting issue, as we must never ever use castings for bitmap type. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steven Zou <steven.zou@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | overflow: Change DEFINE_FLEX to take __counted_by memberKees Cook2024-03-226-18/+18
|/ | | | | | | | | | | | The norm should be flexible array structures with __counted_by annotations, so DEFINE_FLEX() is updated to expect that. Rename the non-annotated version to DEFINE_RAW_FLEX(), and update the few existing users. Additionally add selftests for the macros. Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-03-111-13/+11
|\ | | | | | | | | | | Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * ice: fix stats being updated by way too large valuesPrzemek Kitszel2024-03-061-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify stats accumulation logic to fix the case where we don't take previous stat value into account, we should always respect it. Main netdev stats of our PF (Tx/Rx packets/bytes) were reported orders of magnitude too big during OpenStack reconfiguration events, possibly other reconfiguration cases too. The regression was reported to be between 6.1 and 6.2, so I was almost certain that on of the two "preserve stats over reset" commits were the culprit. While reading the code, it was found that in some cases we will increase the stats by arbitrarily large number (thanks to ignoring "-prev" part of condition, after zeroing it). Note that this fixes also the case where we were around limits of u64, but that was not the regression reported. Full disclosure: I remember suggesting this particular piece of code to Ben a few years ago, so blame on me. Fixes: 2fd5e433cd26 ("ice: Accumulate HW and Netdev statistics over reset") Reported-by: Nebojsa Stevanovic <nebojsa.stevanovic@gcore.com> Link: https://lore.kernel.org/intel-wired-lan/VI1PR02MB439744DEDAA7B59B9A2833FE912EA@VI1PR02MB4397.eurprd02.prod.outlook.com Reported-by: Christian Rohmann <christian.rohmann@inovex.de> Link: https://lore.kernel.org/intel-wired-lan/f38a6ca4-af05-48b1-a3e6-17ef2054e525@inovex.de Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | Merge branch '100GbE' of ↵David S. Miller2024-03-113-5/+145
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ethtool: ice: Support for RSS settings to GTP Takeru Hayasaka enables RSS functionality for GTP packets on ice driver with ethtool. A user can include TEID and make RSS work for GTP-U over IPv4 by doing the following:`ethtool -N ens3 rx-flow-hash gtpu4 sde` In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d. gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does not include a TEID. gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that includes a TEID. gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios. gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6. gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended header includes Uplink, applicable to both IPv4 and IPv6. gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink, for both IPv4 and IPv6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ice: Implement RSS settings for GTP using ethtoolTakeru Hayasaka2024-03-063-5/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the addition of new GTP RSS hash options to ethtool.h, this patch implements the corresponding RSS settings for GTP packets in the Intel ice driver. It enables users to configure RSS for GTP-U and GTP-C traffic over IPv4 and IPv6, utilizing the newly defined hash options. The implementation covers the handling of gtpu(4|6), gtpc(4|6), gtpc(4|6)t, gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d traffic, providing enhanced load distribution for GTP traffic across multiple processing units. Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | net: introduce include/net/rps.hEric Dumazet2024-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move RPS related structures and helpers from include/linux/netdevice.h and include/net/sock.h to a new include file. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-03-077-20/+21
|\ \ \ | |/ / |/| / | |/ | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * Merge branch '100GbE' of ↵David S. Miller2024-03-065-12/+5
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-05 (idpf, ice, i40e, igc, e1000e) This series contains updates to idpf, ice, i40e, igc and e1000e drivers. Emil disables local BH on NAPI schedule for proper handling of softirqs on idpf. Jake stops reporting of virtchannel RSS option which in unsupported on ice. Rand Deeb adds null check to prevent possible null pointer dereference on ice. Michal Schmidt moves DPLL mutex initialization to resolve uninitialized mutex usage for ice. Jesse fixes incorrect variable usage for calculating Tx stats on ice. Ivan Vecera corrects logic for firmware equals check on i40e. Florian Kauer prevents memory corruption for XDP_REDIRECT on igc. Sasha reverts an incorrect use of FIELD_GET which caused a regression for Wake on LAN on e1000e. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * ice: fix typo in assignmentJesse Brandeburg2024-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an obviously incorrect assignment, created with a typo or cut-n-paste error. Fixes: 5995ef88e3a8 ("ice: realloc VSI stats arrays") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: fix uninitialized dplls mutex usageMichal Schmidt2024-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pf->dplls.lock mutex is initialized too late, after its first use. Move it to the top of ice_dpll_init. Note that the "err_exit" error path destroys the mutex. And the mutex is the last thing destroyed in ice_dpll_deinit. This fixes the following warning with CONFIG_DEBUG_MUTEXES: ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0 ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link) ice 0000:10:00.0: PTP init successful ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40 Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c> CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3 Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023 Workqueue: events work_for_cpu_fn RIP: 0010:__mutex_lock+0x773/0xd40 Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a> RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8 FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x84/0x170 ? __mutex_lock+0x773/0xd40 ? report_bug+0x1c7/0x1d0 ? prb_read_valid+0x1b/0x30 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __mutex_lock+0x773/0xd40 ? rcu_is_watching+0x11/0x50 ? __kmalloc_node_track_caller+0x346/0x490 ? ice_dpll_lock_status_get+0x28/0x50 [ice] ? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice] ? ice_dpll_lock_status_get+0x28/0x50 [ice] ice_dpll_lock_status_get+0x28/0x50 [ice] dpll_device_get_one+0x14f/0x2e0 dpll_device_event_send+0x7d/0x150 dpll_device_register+0x124/0x180 ice_dpll_init_dpll+0x7b/0xd0 [ice] ice_dpll_init+0x224/0xa40 [ice] ? _dev_info+0x70/0x90 ice_load+0x468/0x690 [ice] ice_probe+0x75b/0xa10 [ice] ? _raw_spin_unlock_irqrestore+0x4f/0x80 ? process_one_work+0x1a3/0x500 local_pci_probe+0x47/0xa0 work_for_cpu_fn+0x17/0x30 process_one_work+0x20d/0x500 worker_thread+0x1df/0x3e0 ? __pfx_worker_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> irq event stamp: 125197 hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0 hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0 softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 ---[ end trace 0000000000000000 ]--- Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink()Rand Deeb2024-03-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink") Signed-off-by: Rand Deeb <rand.sec96@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: virtchnl: stop pretending to support RSS over AQ or registersJacob Keller2024-03-052-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The E800 series hardware uses the same iAVF driver as older devices, including the virtchnl negotiation scheme. This negotiation scheme includes a mechanism to determine what type of RSS should be supported, including RSS over PF virtchnl messages, RSS over firmware AdminQ messages, and RSS via direct register access. The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its supported by the VF driver. However, if an older VF driver is loaded, it may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ. The ice driver happily agrees to support these methods. Unfortunately, the underlying hardware does not support these mechanisms. The E800 series VFs don't have the appropriate registers for RSS_REG. The mailbox queue used by VFs for VF to PF communication blocks messages which do not have the VF-to-PF opcode. Stop lying to the VF that it could support RSS over AdminQ or registers, as these interfaces do not work when the hardware is operating on an E800 series device. In practice this is unlikely to be hit by any normal user. The iAVF driver has supported RSS over PF virtchnl commands since 2016, and always defaults to using RSS_PF if possible. In principle, nothing actually stops the existing VF from attempting to access the registers or send an AQ command. However a properly coded VF will check the capability flags and will report a more useful error if it detects a case where the driver does not support the RSS offloads that it does. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Alan Brady <alan.brady@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | dpll: move all dpll<>netdev helpers to dpll codeJakub Kicinski2024-03-051-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Older versions of GCC really want to know the full definition of the type involved in rcu_assign_pointer(). struct dpll_pin is defined in a local header, net/core can't reach it. Move all the netdev <> dpll code into dpll, where the type is known. Otherwise we'd need multiple function calls to jump between the compilation units. This is the same problem the commit under fixes was trying to address, but with rcu_assign_pointer() not rcu_dereference(). Some of the exports are not needed, networking core can't be a module, we only need exports for the helpers used by drivers. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/ Fixes: 640f41ed33b5 ("dpll: fix build failure due to rcu_dereference_check() on unknown type") Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * ice: reconfig host after changing MSI-X on VFMichal Swiatkowski2024-03-011-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During VSI reconfiguration filters and VSI config which is set in ice_vf_init_host_cfg() are lost. Recall the host configuration function to restore them. Without this config VF on which MSI-X amount was changed might had a connection problems. Fixes: 4d38cb44bd32 ("ice: manage VFs MSI-X using resource tracking") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: reorder disabling IRQ and NAPI in ice_qp_disMaciej Fijalkowski2024-03-011-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ice_qp_dis() currently does things in very mixed way. Tx is stopped before disabling IRQ on related queue vector, then it takes care of disabling Rx and finally NAPI is disabled. Let us start with disabling IRQs in the first place followed by turning off NAPI. Then it is safe to handle queues. One subtle change on top of that is that even though ice_qp_ena() looks more sane, clear ICE_CFG_BUSY as the last thing there. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: avoid unnecessary devm_ usageMaciej Fijalkowski2024-03-042-30/+14
| | | | | | | | | | | | | | | | | | | | | | | | 1. pcaps are free'd right after AQ routines are done, no need for devm_'s 2. a test frame for loopback test in ethtool -t is destroyed at the end of the test so we don't need devm_ here either. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: do not disable Tx queues twice in ice_down()Maciej Fijalkowski2024-03-043-57/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | ice_down() clears QINT_TQCTL_CAUSE_ENA_M bit twice, which is not necessary. First clearing happens in ice_vsi_dis_irq() and second in ice_vsi_stop_tx_ring() - remove the first one. While at it, make ice_vsi_dis_irq() static as ice_down() is the only current caller of it. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: cleanup line splitting for context set functionsJacob Keller2024-03-042-13/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The indentation for ice_set_ctx and ice_write_rxq_ctx breaks the function name after the return type. This style of breaking is used a lot throughout the ice driver, even in cases where its not actually helpful for readability. We no longer prefer this style of line splitting in the driver, and new code is avoiding it. Normally, I would leave this alone unless the actual function contents or description needed updating. However, a future change is going to add inverse functions for converting packed context to unpacked context structures. To keep this code uniform with the existing set functions, fix up the style to the modern format of keeping the type on the same line. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: use GENMASK instead of BIT(n) - 1 in pack functionsJacob Keller2024-03-041-36/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions used to pack the Tx and Rx context into the hardware format rely on using BIT() and then subtracting 1 to get a bitmask. These functions even have a comment about how x86 machines can't use this method for certain widths because the SHL instructions will not work properly. The Linux kernel already provides the GENMASK macro for generating a suitable bitmask. Further, GENMASK is capable of generating the mask including the shift_width. Since width is the total field width, take care to subtract one to get the final bit position. Since we now include the shifted bits as part of the mask, shift the source value first before applying the mask. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: rename ice_write_* functions to ice_pack_ctx_*Jacob Keller2024-03-041-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ice_common.c there are 4 functions used for converting the unpacked software Tx and Rx context structure data into the packed format used by hardware. These functions have extremely generic names: * ice_write_byte * ice_write_word * ice_write_dword * ice_write_qword When I saw these function names my first thought was "write what? to where?". Understanding what these functions do requires looking at the implementation details. The functions take bits from an unpacked structure and copy them into the packed layout used by hardware. As part of live migration, we will want functions which perform the inverse operation of reading bits from the packed layout and copying them into the unpacked format. Naming these as "ice_read_byte", etc would be very confusing since they appear to write data. In preparation for adding this new inverse operation, rename the existing functions to use the prefix "ice_pack_ctx_". This makes it clear that they perform the bit packing while copying from the unpacked software context structure to the packed hardware context. The inverse operations can then neatly be named ice_unpack_ctx_*, clearly indicating they perform the bit unpacking while copying from the packed hardware context to the unpacked software context structure. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: remove vf->lan_vsi_num fieldJacob Keller2024-03-043-15/+1
| | | | | | | | | | | | | | | | | | | | The lan_vsi_num field of the VF structure is no longer used for any purpose. Remove it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: use relative VSI index for VFs instead of PF VSI numberJacob Keller2024-03-042-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When initializing over virtchnl, the PF is required to pass a VSI ID to the VF as part of its capabilities exchange. The VF driver reports this value back to the PF in a variety of commands. The PF driver validates that this value matches the value it sent to the VF. Some hardware families such as the E700 series could use this value when reading RSS registers or communicating directly with firmware over the Admin Queue. However, E800 series hardware does not support any of these interfaces and the VF's only use for this value is to report it back to the PF. Thus, there is no requirement that this value be an actual VSI ID value of any kind. The PF driver already does not trust that the VF sends it a real VSI ID. The VSI structure is always looked up from the VF structure. The PF does validate that the VSI ID provided matches a VSI associated with the VF, but otherwise does not use the VSI ID for any purpose. Instead of reporting the VSI number relative to the PF space, report a fixed value of 1. When communicating with the VF over virtchnl, validate that the VSI number is returned appropriately. This avoids leaking information about the firmware of the PF state. Currently the ice driver only supplies a VF with a single VSI. However, it appears that virtchnl has some support for allowing multiple VSIs. I did not attempt to implement this. However, space is left open to allow further relative indexes if additional VSIs are provided in future feature development. For this reason, keep the ice_vc_isvalid_vsi_id function in place to allow extending it for multiple VSIs in the future. This change will also simplify handling of live migration in a future series. Since we no longer will provide a real VSI number to the VF, there will be no need to keep track of this number when migrating to a new host. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: remove unnecessary duplicate checks for VF VSI IDJacob Keller2024-03-041-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice_vc_fdir_param_check() function validates that the VSI ID of the virtchnl flow director command matches the VSI number of the VF. This is already checked by the call to ice_vc_isvalid_vsi_id() immediately following this. This check is unnecessary since ice_vc_isvalid_vsi_id() already confirms this by checking that the VSI ID can locate the VSI associated with the VF structure. Furthermore, a following change is going to refactor the ice driver to report VSI IDs using a relative index for each VF instead of reporting the PF VSI number. This additional check would break that logic since it enforces that the VSI ID matches the VSI number. Since this check duplicates the logic in ice_vc_isvalid_vsi_id() and gets in the way of refactoring that logic, remove it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: pass VSI pointer into ice_vc_isvalid_q_idJacob Keller2024-03-041-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice_vc_isvalid_q_id() function takes a VSI index and a queue ID. It looks up the VSI from its index, and then validates that the queue number is valid for that VSI. The VSI ID passed is typically a VSI index from the VF. This VSI number is validated by the PF to ensure that it matches the VSI associated with the VF already. In every flow where ice_vc_isvalid_q_id() is called, the PF driver already has a pointer to the VSI associated with the VF. This pointer is obtained using ice_get_vf_vsi(), rather than looking up the VSI using the index sent by the VF. Since we already know which VSI to operate on, we can modify ice_vc_isvalid_q_id() to take a VSI pointer instead of a VSI index. Pass the VSI we found from ice_get_vf_vsi() instead of re-doing the lookup. This removes some unnecessary computation and scanning of the VSI list. It also removes the last place where the driver directly used the VSI number from the VF. This will pave the way for refactoring to communicate relative VSI numbers to the VF instead of absolute numbers from the PF space. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-02-295-39/+161
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * ice: Fix ASSERT_RTNL() warning during certain scenariosAmritha Nambiar2024-02-204-26/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") invoked the netif_queue_set_napi() call. This kernel function requires to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered. ice_vsi_rebuild() initiating this call is under rtnl_lock when the rebuild is in response to configuration changes from external interfaces (such as tc, ethtool etc. which holds the lock). But, the VSI rebuild generated from service tasks and resets (PFR/CORER/GLOBR) is not under rtnl lock protection. Handle these cases as well to hold lock before the kernel call (by setting the 'locked' boolean to false). netif_queue_set_napi() is also used to clear previously set napi in the q_vector unroll flow. Handle this for locked/lockless execution paths. Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: fix pin phase adjust updates on PF resetArkadiusz Kubalewski2024-02-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not allow to set phase adjust value for a pin if PF reset is in progress, this would cause confusing netlink extack errors as the firmware cannot process the request properly during the reset time. Return (-EBUSY) and report extack error for the user who tries configure pin phase adjust during the reset time. Test by looping execution of below steps until netlink error appears: - perform PF reset $ echo 1 > /sys/class/net/<ice PF>/device/reset - change pin phase adjust value: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-set --json '{"id":0, "phase-adjust":1000}' Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: fix dpll periodic work data updates on PF resetArkadiusz Kubalewski2024-02-201-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not allow dpll periodic work function to acquire data from firmware if PF reset is in progress. Acquiring data will cause dmesg errors as the firmware cannot respond or process the request properly during the reset time. Test by looping execution of below step until dmesg error appears: - perform PF reset $ echo 1 > /sys/class/net/<ice PF>/device/reset Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: fix dpll and dpll_pin data access on PF resetArkadiusz Kubalewski2024-02-201-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not allow to acquire data or alter configuration of dpll and pins through firmware if PF reset is in progress, this would cause confusing netlink extack errors as the firmware cannot respond or process the request properly during the reset time. Return (-EBUSY) and extack error for the user who tries access/modify the config of dpll/pin through firmware during the reset time. The PF reset and kernel access to dpll data are both asynchronous. It is not possible to guard all the possible reset paths with any determinictic approach. I.e., it is possible that reset starts after reset check is performed (or if the reset would be checked after mutex is locked), but at the same time it is not possible to wait for dpll mutex unlock in the reset flow. This is best effort solution to at least give a clue to the user what is happening in most of the cases, knowing that there are possible race conditions where the user could see a different error received from firmware due to reset unexpectedly starting. Test by looping execution of below steps until netlink error appears: - perform PF reset $ echo 1 > /sys/class/net/<ice PF>/device/reset - i.e. try to alter/read dpll/pin config: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --dump pin-get Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: fix dpll input pin phase_adjust value updatesArkadiusz Kubalewski2024-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value of phase_adjust for input pin shall be updated in ice_dpll_pin_state_update(..). Fix by adding proper argument to the firmware query function call - a pin's struct field pointer where the phase_adjust value during driver runtime is stored. Previously the phase_adjust used to misinform user about actual phase_adjust value. I.e., if phase_adjust was set to a non zero value and if driver was reloaded, the user would see the value equal 0, which is not correct - the actual value is equal to value set before driver reload. Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: fix connection state of DPLL and out pinYochai Hagvi2024-02-201-11/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the connection state between source DPLL and output pin, updating the attribute 'state' of 'parent_device'. Previously, the connection state was broken, and didn't reflect the correct state. When 'state_on_dpll_set' is called with the value 'DPLL_PIN_STATE_CONNECTED' (1), the output pin will switch to the given DPLL, and the state of the given DPLL will be set to connected. E.g.: --do pin-set --json '{"id":2, "parent-device":{"parent-id":1, "state": 1 }}' This command will connect DPLL device with id 1 to output pin with id 2. When 'state_on_dpll_set' is called with the value 'DPLL_PIN_STATE_DISCONNECTED' (2) and the given DPLL is currently connected, then the output pin will be disabled. E.g: --do pin-set --json '{"id":2, "parent-device":{"parent-id":1, "state": 2 }}' This command will disable output pin with id 2 if DPLL device with ID 1 is connected to it; otherwise, the command is ignored. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-02-152-2/+26
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * ice: Add check for lport extraction to LAG initDave Ertman2024-02-142-2/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To fully support initializing the LAG support code, a DDP package that extracts the logical port from the metadata is required. If such a package is not present, there could be difficulties in supporting some bond types. Add a check into the initialization flow that will bypass the new paths if any of the support pieces are missing. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240213183957.1483857-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ice: Fix debugfs with devlink reloadWojciech Drewek2024-02-124-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During devlink reload it is needed to remove debugfs entries correlated with only one PF. ice_debugfs_exit() removes all entries created by ice driver so we can't use it. Introduce ice_debugfs_pf_deinit() in order to release PF's debugfs entries. Move ice_debugfs_exit() call to ice_module_exit(), it makes more sense since ice_debugfs_init() is called in ice_module_init() and not in ice_probe(). Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: Remove and readd netdev during devlink reloadWojciech Drewek2024-02-123-131/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent changes to the devlink reload (commit 9b2348e2d6c9 ("devlink: warn about existing entities during reload-reinit")) force the drivers to destroy devlink ports during reinit. Adjust ice driver to this requirement, unregister netdvice, destroy devlink port. ice_init_eth() was removed and all the common code between probe and reload was moved to ice_load(). During devlink reload we can't take devl_lock (it's already taken) and in ice_probe() we have to lock it. Use devl_* variant of the API which does not acquire and release devl_lock. Guard ice_load() with devl_lock only in case of probe. Suggested-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: add support for 3k signing DDP sections for E825CGrzegorz Nitka2024-02-122-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | E825C devices shall support the new signing type of RSA 3K for new DDP section (SEGMENT_SIGN_TYPE_RSA3K_E825 (5) - already in the code). The driver is responsible to verify the presence of correct signing type. Add 3k signinig support for E825C devices based on mac_type: ICE_MAC_GENERIC_3K_E825; Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: Add helper function ice_is_generic_macGrzegorz Nitka2024-02-125-3/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E800 series devices have a couple of quirks: 1. Sideband control queues are not supported 2. The registers that the driver needs to program for the "Precision Time Protocol (PTP)" feature are different for E800 series devices compared to other devices supported by this driver. Both these require conditional logic based on the underlying device we are dealing with. The function ice_is_sbq_supported added by commit 8f5ee3c477a8 ("ice: add support for sideband messages") addresses (1). The same function can be used to address (2) as well but this just looks weird readability wise in cases that have nothing to do with sideband control queues: if (ice_is_sbq_supported(hw)) /* program register A */ else /* program register B */ For these cases, the function ice_is_generic_mac introduced by this patch communicates the idea/intention better. Also rework ice_is_sbq_supported to use this new function. As side-band queue is supported for E825C devices, it's mac_type is considered as generic mac_type. Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: introduce new E825C devices familyGrzegorz Nitka2024-02-124-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new Intel Ethernet E825C family devices. Add new PCI device IDs which are going to be supported by the driver: - 579C: Intel(R) Ethernet Connection E825-C for backplane - 579D: Intel(R) Ethernet Connection E825-C for QSFP - 579E: Intel(R) Ethernet Connection E825-C for SFP - 579F: Intel(R) Ethernet Connection E825-C for SGMII Add helper function ice_is_e825c() to verify if the running device belongs to E825C family. Co-developed-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-02-082-2/+2
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/stmicro/stmmac/common.h 38cc3c6dcc09 ("net: stmmac: protect updates of 64-bit statistics counters") fd5a6a71313e ("net: stmmac: est: Per Tx-queue error count for HLBF") c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") drivers/net/wireless/microchip/wilc1000/netdev.c c9013880284d ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000") 328efda22af8 ("wifi: wilc1000: do not realloc workqueue everytime an interface is added") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 1279f9d9dec2 ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: intel: fix old compiler regressionsJesse Brandeburg2024-02-072-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel build regressions/improvements email contained a couple of issues with old compilers (in fact all the reports were on different architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET() conversions. They're all because an integer #define that should have been declared as unsigned, was shifted to the point that it could set the sign bit. The fix just involves making sure the defines use the "U" identifier on the constants to make sure they're unsigned. Should make the checkers happier. Confirmed with objdump before/after that there is no change to the binaries. Issues were reported as follows: ./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET' (FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US)) ^ ./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’ orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver); ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’ u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M, ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’ oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype); ^ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/lkml/d03e90ca-8485-4d1b-5ec1-c3398e0e8da@linux-m68k.org/ #i40e #ice Fixes: 62589808d73b ("i40e: field get conversion") Fixes: 5a259f8e0baf ("ice: field get conversion") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20240206022906.2194214-1-jesse.brandeburg@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ice: remove incorrect commentPaul M Stillwell Jr2024-02-021-3/+0
| | | | | | | | | | | | | | | | | | Copy paste issue left a comment for this structure that has nothing to do with FW alignment; remove the comment. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: Add a new counter for Rx EIPE errorsAniruddha Paul2024-02-023-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HW incorrectly reports EIPE errors on encapsulated packets with L2 padding inside inner packet. HW shows outer UDP/IPV4 packet checksum errors as part of the EIPE flags of the Rx descriptor. These are reported only if checksum offload is enabled and L3/L4 parsed flag is valid in Rx descriptor. When that error is reported by HW, we don't act on it instead of incrementing main Rx errors statistic as it would normally happen. Add a new statistic to count these errors since we still want to print them. Signed-off-by: Aniruddha Paul <aniruddha.paul@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: make ice_vsi_cfg_txq() staticMaciej Fijalkowski2024-02-025-100/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, XSK control path in ice driver calls directly ice_vsi_cfg_txq() whereas we have ice_vsi_cfg_single_txq() for that purpose. Use the latter from XSK side and make ice_vsi_cfg_txq() static. ice_vsi_cfg_txq() resides in ice_base.c and is rather big, so to reduce the code churn let us move the callers of it from ice_lib.c to ice_base.c. This change puts ice_qp_ena() on nice diet due to the checks and operations that ice_vsi_cfg_single_{r,t}xq() do internally. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-182 (-182) Function old new delta ice_xsk_pool_setup 2165 1983 -182 Total: Before=472597, After=472415, chg -0.04% Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ice: make ice_vsi_cfg_rxq() staticMaciej Fijalkowski2024-02-025-63/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, XSK control path in ice driver calls directly ice_vsi_cfg_rxq() whereas we have ice_vsi_cfg_single_rxq() for that purpose. Use the latter from XSK side and make ice_vsi_cfg_rxq() static. ice_vsi_cfg_rxq() resides in ice_base.c and is rather big, so to reduce the code churn let us move two callers of it from ice_lib.c to ice_base.c. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 07:23:47 +0000