summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe
Commit message (Collapse)AuthorAgeFilesLines
* ixgbe: Fix race when the VF driver does a resetRoss Lagerwall2018-12-121-1/+10
| | | | | | | | | | | | | | | | | When the VF driver does a reset, it (at least the Linux one) writes to the VFCTRL register to issue a reset and then immediately sends a reset message using the mailbox API. This is racy because when the PF driver detects that the VFCTRL register reset pin has been asserted, it clears the mailbox memory. Depending on ordering, the reset message sent by the VF could be cleared by the PF driver. It then responds to the cleared message with a NACK which causes the VF driver to malfunction. Fix this by deferring clearing the mailbox memory until the reset message is received. Fixes: 939b701ad633 ("ixgbe: fix driver behaviour after issuing VFLR") Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: recognize 1000BaseLX SFP modules as 1GbpsJosh Elsasser2018-11-281-1/+3
| | | | | | | | | | | | | Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules, allowing the core driver code to establish a link over this SFP type. This is done by the out-of-tree driver but the fix wasn't in mainline. Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”) Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers") Signed-off-by: Josh Elsasser <jelsasser@appneta.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix MAC anti-spoofing filter after VFLRRadoslaw Tyl2018-10-311-1/+3
| | | | | | | | | | | | | | This change resolves a driver bug where the driver is logging a message that says "Spoofed packets detected". This can occur on the PF (host) when a VF has VLAN+MACVLAN enabled and is re-started with a different MAC address. MAC and VLAN anti-spoofing filters are to be enabled together. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe/ixgbevf: fix XFRM_ALGO dependencyJeff Kirsher2018-10-313-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on the original work from Arnd Bergmann. When XFRM_ALGO is not enabled, the new ixgbe IPsec code produces a link error: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.o: In function `ixgbe_ipsec_vf_add_sa': ixgbe_ipsec.c:(.text+0x1266): undefined reference to `xfrm_aead_get_byname' Simply selecting XFRM_ALGO from here causes circular dependencies, so to fix it, we probably want this slightly more complex solution that is similar to what other drivers with XFRM offload do: A separate Kconfig symbol now controls whether we include the IPsec offload code. To keep the old behavior, this is left as 'default y'. The dependency in XFRM_OFFLOAD still causes a circular dependency but is not actually needed because this symbol is not user visible, so removing that dependency on top makes it all work. CC: Arnd Bergmann <arnd@arndb.de> CC: Shannon Nelson <shannon.nelson@oracle.com> Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2018-10-261-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "What better way to start off a weekend than with some networking bug fixes: 1) net namespace leak in dump filtering code of ipv4 and ipv6, fixed by David Ahern and Bjørn Mork. 2) Handle bad checksums from hardware when using CHECKSUM_COMPLETE properly in UDP, from Sean Tranchetti. 3) Remove TCA_OPTIONS from policy validation, it turns out we don't consistently use nested attributes for this across all packet schedulers. From David Ahern. 4) Fix SKB corruption in cadence driver, from Tristram Ha. 5) Fix broken WoL handling in r8169 driver, from Heiner Kallweit. 6) Fix OOPS in pneigh_dump_table(), from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits) net/neigh: fix NULL deref in pneigh_dump_table() net: allow traceroute with a specified interface in a vrf bridge: do not add port to router list when receives query with source 0.0.0.0 net/smc: fix smc_buf_unuse to use the lgr pointer ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are called net/{ipv4,ipv6}: Do not put target net if input nsid is invalid lan743x: Remove SPI dependency from Microchip group. drivers: net: remove <net/busy_poll.h> inclusion when not needed net: phy: genphy_10g_driver: Avoid NULL pointer dereference r8169: fix broken Wake-on-LAN from S5 (poweroff) octeontx2-af: Use GFP_ATOMIC under spin lock net: ethernet: cadence: fix socket buffer corruption problem net/ipv6: Allow onlink routes to have a device mismatch if it is the default route net: sched: Remove TCA_OPTIONS from policy ice: Poll for link status change ice: Allocate VF interrupts and set queue map ice: Introduce ice_dev_onetime_setup net: hns3: Fix for warning uninitialized symbol hw_err_lst3 octeontx2-af: Copy the right amount of memory net: udp: fix handling of CHECKSUM_COMPLETE packets ...
| * drivers: net: remove <net/busy_poll.h> inclusion when not neededEric Dumazet2018-10-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Drivers using generic NAPI interface no longer need to include <net/busy_poll.h>, since busy polling was moved to core networking stack long ago. See commit 79e7fff47b7b ("net: remove support for per driver ndo_busy_poll()") for reference. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds2018-10-251-10/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
| * PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep2018-10-021-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-10-031-5/+7
|\ \ | | | | | | | | | | | | | | | | | | Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: check return value of napi_complete_done()Song Liu2018-10-031-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NIC driver should only enable interrupts when napi_complete_done() returns true. This patch adds the check for ixgbe. Cc: stable@vger.kernel.org # 4.10+ Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ixgbe: add AF_XDP zero-copy Tx supportBjörn Töpel2018-10-033-1/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds zero-copy Tx support for AF_XDP sockets. It implements the ndo_xsk_async_xmit netdev ndo and performs all the Tx logic from a NAPI context. This means pulling egress packets from the Tx ring, placing the frames on the NIC HW descriptor ring and completing sent frames back to the application via the completion ring. The regular XDP Tx ring is used for AF_XDP as well. This rationale for this is as follows: XDP_REDIRECT guarantees mutual exclusion between different NAPI contexts based on CPU id. In other words, a netdev can XDP_REDIRECT to another netdev with a different NAPI context, since the operation is bound to a specific core and each core has its own hardware ring. As the AF_XDP Tx action is running in the same NAPI context and using the same ring, it will also be protected from XDP_REDIRECT actions with the exact same mechanism. As with AF_XDP Rx, all AF_XDP Tx specific functions are added to ixgbe_xsk.c. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: move common Tx functions to ixgbe_txrx_common.hBjörn Töpel2018-10-032-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares for the upcoming zero-copy Tx functionality by moving common functions used both by the regular path and zero-copy path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: add AF_XDP zero-copy Rx supportBjörn Töpel2018-10-036-21/+745
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds zero-copy Rx support for AF_XDP sockets. Instead of allocating buffers of type MEM_TYPE_PAGE_SHARED, the Rx frames are allocated as MEM_TYPE_ZERO_COPY when AF_XDP is enabled for a certain queue. All AF_XDP specific functions are added to a new file, ixgbe_xsk.c. Note that when AF_XDP zero-copy is enabled, the XDP action XDP_PASS will allocate a new buffer and copy the zero-copy frame prior passing it to the kernel stack. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: move common Rx functions to ixgbe_txrx_common.hBjörn Töpel2018-10-032-18/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares for the upcoming zero-copy Rx functionality, by moving/changing linkage of common functions, used both by the regular path and zero-copy path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: added Rx/Tx ring disable/enable functionsBjörn Töpel2018-10-032-0/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add functions for Rx/Tx ring enable/disable. Instead of resetting the whole device, only the affected ring is disabled or enabled. This plumbing is used in later commits, when zero-copy AF_XDP support is introduced. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: Fix crash with VFs and flow director on interface flapRadoslaw Tyl2018-10-031-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fix crash when we have restore flow director filters after reset adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the rx_ring array, as it has a VF identifier in the upper 32 bits. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: remove redundant function ixgbe_fw_recovery_mode()YueHaibing2018-10-031-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | There are no in-tree callers. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: Fix ixgbe TX hangs with XDP_TX beyond queue limitRadoslaw Tyl2018-10-031-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | We have Tx hang when number Tx and XDP queues are more than 64. In XDP always is MTQC == 0x0 (64TxQs). We need more space for Tx queues. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-09-251-25/+0
|\| | | | | | | | | | | | | | | | | | | | | | | | | | Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ixgbe: remove ndo_poll_controllerEric Dumazet2018-09-231-25/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbe uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Reported-by: Song Liu <songliubraving@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Song Liu <songliubraving@fb.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | intel-ethernet: use correct module licenseJesse Brandeburg2018-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | We recently updated all our SPDX identifiers to correctly indicate our net/ethernet/intel/* drivers were always released and intended to be released under GPL v2, but the MODULE_LICENSE declaration was never updated. Fix the MODULE_LICENSE to be GPL v2, for all our drivers. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: fix the return value for unsupported VF offloadShannon Nelson2018-08-281-1/+1
| | | | | | | | | | | | | | | | | | When failing the request because we can't support that offload, reporting EOPNOTSUPP makes much more sense than ENXIO. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: disallow IPsec Tx offload when in SR-IOV modeShannon Nelson2018-08-281-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There seems to be a problem in the x540's internal switch wherein if SR-IOV mode is enabled and an offloaded IPsec packet is sent to a local VF, the packet is silently dropped. This might never be a problem as it is somewhat a corner case, but if someone happens to be using IPsec offload from the PF to a VF that just happens to get migrated to the local box, communication will mysteriously fail. Not good. A simple way to protect from this is to simply not allow any IPsec offloads for outgoing packets when num_vfs != 0. This doesn't help any offloads that were created before SR-IOV was enabled, but we'll get to that later. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: add VF IPsec offload request message handlingShannon Nelson2018-08-283-6/+35
| | | | | | | | | | | | | | | | | | | | | | | | Add an add and a delete message for IPsec offload requests from the VF. These call into the IPsec functions that can translate the message buffer into a useful IPsec offload. These new messages bump the mbox API version to 1.4. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: add VF IPsec offload enable flagShannon Nelson2018-08-283-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a private flag to expressly enable support for VF IPsec offload. The VF will have to be "trusted" in order to use the hardware offload, but because of the general concerns of managing VF access, we want to be sure the user specifically is enabling the feature. This is likely a candidate for becoming a netdev feature flag. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: add VF IPsec managementShannon Nelson2018-08-282-9/+260
| | | | | | | | | | | | | | | | | | Add functions to translate VF IPsec offload add and delete requests into something the existing code can work with. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: prep IPsec constants for later useShannon Nelson2018-08-281-3/+5
| | | | | | | | | | | | | | | | | | Pull out a couple of values from a function so they can be used later elsewhere. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: reload IPsec IP table after sa tablesShannon Nelson2018-08-281-8/+8
| | | | | | | | | | | | | | | | | | | | Restore the IPsec hardware IP table after reloading the SA tables. This doesn't make much difference now, but will matter when we add support for VF IPsec offloads. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: don't clear IPsec sa counters on HW clearingShannon Nelson2018-08-281-4/+0
| | | | | | | | | | | | | | | | | | | | | | The software SA record counters should not be cleared when clearing the hardware tables. This causes the counters to be out of sync after a driver reset. Fixes: 63a67fe229ea ("ixgbe: add ipsec offload add and remove SA") Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | ixgbe: firmware recovery modeSebastian Basierski2018-08-284-0/+71
|/ | | | | | | | | Add check for FW NVM recovery mode during driver initialization and service task. If in recovery mode, log message and unregister device Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: fix driver behaviour after issuing VFLRSebastian Basierski2018-08-242-0/+27
| | | | | | | | | | Since VFLR doesn't clear VFMBMEM (VF Mailbox Memory) and is not re-enabling queues correctly we should fix this behavior. Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Prevent unsupported configurations with XDPTony Nguyen2018-08-242-2/+31
| | | | | | | | | | | | | | | | | | | These changes address comments by Jakub Kicinski on commit 38b7e7f8ae82 ("ixgbe: Do not allow LRO or MTU change with XDP"). Change the MTU check with XDP to allow any supported value and only reject those outside of the range as opposed to rejecting any change when XDP is active. In situations where MTU size is not supported, return -EINVAL instead of -EPERM. Add checks when enabling SRIOV, DCB, or adding L2FW offloaded device as they are not supported with XDP. CC: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Replace GFP_ATOMIC with GFP_KERNELJia-Ju Bai2018-08-242-3/+3
| | | | | | | | | | | | | | ixgbe_fcoe_ddp_setup(), ixgbe_setup_fcoe_ddp_resources() and ixgbe_sw_init() are never called in atomic context. They call kmalloc(), dma_pool_alloc() and kzalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* net_sched: remove list_head from tc_actionCong Wang2018-08-211-4/+2
| | | | | | | | | | | | After commit 90b73b77d08e, list_head is no longer needed. Now we just need to convert the list iteration to array iteration for drivers. Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: Refactor queue disable logic to take completion time into accountAlexander Duyck2018-07-263-91/+224
| | | | | | | | | | | | | | This change is meant to allow us to take completion time into account when disabling queues. Previously we were just working with hard coded values for how long we should wait. This worked fine for the standard case where completion timeout was operating in the 50us to 50ms range, however on platforms that have higher completion timeout times this was resulting in Rx queues disable messages being displayed as we weren't waiting long enough for outstanding Rx DMA completions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Reorder Tx/Rx shutdown to reduce time needed to stop deviceAlexander Duyck2018-07-261-7/+7
| | | | | | | | | | | | | | | | | | This change is meant to help reduce the time needed to shutdown the transmit and receive paths for the device. Specifically what we now do after this patch is disable the transmit path first at the netdev level, and then work on disabling the Rx. This way while we are waiting on the Rx queues to be disabled the Tx queues have an opportunity to drain out. In addition I have dropped the 10ms timeout that was left in the ixgbe_down function that seems to have been carried through from back in e1000 as far as I can tell. We shouldn't need it since we don't actually disable the Tx until much later and we have additional logic in place for verifying the Tx queues have been disabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: add ipsec security registers into ethtool register dumpShannon Nelson2018-07-261-1/+9
| | | | | | | | | Add the ixgbe's security configuration registers into the register dump. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* ixgbe: Do not allow LRO or MTU change with XDPTony Nguyen2018-07-261-0/+10
| | | | | | | | | | | | XDP does not support jumbo frames or LRO. These checks are being made outside the driver when an XDP program is loaded, however, there is nothing preventing these from changing after an XDP program is loaded. Add the checks so that while an XDP program is loaded, do not allow MTU to be changed or LRO to be enabled. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller2018-07-202-2/+12
|\ | | | | | | | | | | | | All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: Off by one in ixgbe_ipsec_tx()Dan Carpenter2018-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The ipsec->tx_tbl[] has IXGBE_IPSEC_MAX_SA_COUNT elements so the > needs to be changed to >= so we don't read one element beyond the end of the array. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * ixgbe: Be more careful when modifying MAC filtersAlexander Duyck2018-07-121-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2018-07-141-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-15 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various different arm32 JIT improvements in order to optimize code emission and make the JIT code itself more robust, from Russell. 2) Support simultaneous driver and offloaded XDP in order to allow for advanced use-cases where some work is offloaded to the NIC and some to the host. Also add ability for bpftool to load programs and maps beyond just the cgroup case, from Jakub. 3) Add BPF JIT support in nfp for multiplication as well as division. For the latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong. 4) Add BTF pretty print functionality to bpftool in plain and JSON output format, from Okash. 5) Add build and installation to the BPF helper man page into bpftool, from Quentin. 6) Add a TCP BPF callback for listening sockets which is triggered right after the socket transitions to TCP_LISTEN state, from Andrey. 7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup tree and prints all attached programs, from Roman. 8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged packets, from Jesper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | xdp: don't make drivers report attachment modeJakub Kicinski2018-07-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
* | | net: allow fallback function to pass netdevAlexander Duyck2018-07-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For most of these calls we can just pass NULL through to the fallback function as the sb_dev. The only cases where we cannot are the cases where we might be dealing with either an upper device or a driver that would have configured things to support an sb_dev itself. The only driver that has any significant change in this patch set should be ixgbe as we can drop the redundant functionality that existed in both the ndo_select_queue function and the fallback function that was passed through to us. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | net: allow ndo_select_queue to pass netdevAlexander Duyck2018-07-091-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | net: Add support for subordinate traffic classes to netdev_pick_txAlexander Duyck2018-07-091-13/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes it so that we can support the concept of subordinate device traffic classes to the core networking code. In doing this we can start pulling out the driver specific bits needed to support selecting a queue based on an upper device. The solution at is currently stands is only partially implemented. I have the start of some XPS bits in here, but I would still need to allow for configuration of the XPS maps on the queues reserved for the subordinate devices. For now I am using the reference to the sb_dev XPS map as just a way to skip the lookup of the lower device XPS map for now as that would result in the wrong queue being picked. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | ixgbe: Add code to populate and use macvlan TC to Tx queue mapAlexander Duyck2018-07-091-6/+38
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes it so that we use the tc_to_txq mapping in the macvlan device in order to select the Tx queue for outgoing packets. The idea here is to try and move away from using ixgbe_select_queue and to come up with a generic way to make this work for devices going forward. By encoding this information in the netdev this can become something that can be used generically as a solution for similar setups going forward. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-07-031-10/+14
|\| | | | | | | | | | | | | | | | | | | Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: split XDP_TX tail and XDP_REDIRECT map flushingJesper Dangaard Brouer2018-06-281-10/+14
| | | | | | | | | | | | | | | | | | | | The driver was combining the XDP_TX tail flush and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. Fixes: 11393cc9b9be ("xdp: Add batching support to redirect map") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sched: pass extack pointer to block binds and cb registrationJohn Hurley2018-06-261-1/+1
|/ | | | | | | | | | | | Pass the extact struct from a tc qdisc add to the block bind function and, in turn, to the setup_tc ndo of binding device via the tc_block_offload struct. Pass this back to any block callback registrations to allow netlink logging of fails in the bind process. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 21:28:31 +0000