summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* mwifiex: pcie: don't leak DMA buffers when removingBrian Norris2017-03-301-21/+20
| | | | | | | | | | | | | | | | | | commit 4e841d3eb9294ce4137fdb5d0a88f1bceab9c212 upstream. When PCIe FLR support was added, much of the remove/release code for PCIe was migrated to ->down_dev(), but ->down_dev() is never called for device removal. Let's refactor the cleanup to be done in both cases. Also, drop the comments above mwifiex_cleanup_pcie(), because they were clearly wrong, and it's better to have clear and obvious code than to detail the code steps in comments anyway. Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: bcmgenet: remove bcmgenet_internal_phy_setup()Doug Berger2017-03-301-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 31739eae738ccbe8b9d627c3f2251017ca03f4d2 ] Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and bcmgenet_internal_phy_setup() functions. In so doing it broke the reset of the internal PHY devices used by the GENETv1-GENETv3 which required this reset before the UniMAC was enabled. It also broke the internal GPHY devices used by the GENETv4 because the config_init that installed the AFE workaround was no longer occurring after the reset of the GPHY performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). In addition the code in bcmgenet_internal_phy_setup() related to the "enable APD" comment goes with the bcmgenet_mii_reset() so it should have also been removed. Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the bcmgenet_power_up() function, but failed to remove it from the bcmgenet_internal_phy_setup() function. Had it done so, the bcmgenet_internal_phy_setup() function would have been empty and could have been removed at that time. Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") was submitted to correct the functional problems introduced by commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It was included in v4.4 and made available on 4.3-stable. Unfortunately, it didn't fully revert the commit because this bcmgenet_mii_reset() doesn't apply the soft reset to the internal GPHY used by GENETv4 like the previous one did. This prevents the restoration of the AFE work- arounds for internal GPHY devices after the bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). This commit takes the alternate approach of removing the unnecessary bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3 so that when bcmgenet_mii_reset() was restored it should have only gone into bcmgenet_power_up(). This will avoid the problems while also removing the redundancy (and hopefully some of the confusion). Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Count LRO packets correctlyGal Pressman2017-03-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8ab7e2ae15d84ba758b2c8c6f4075722e9bd2a08 ] RX packets statistics ('rx_packets' counter) used to count LRO packets as one, even though it contains multiple segments. This patch will increment the counter by the number of segments, and align the driver with the behavior of other drivers in the stack. Note that no information is lost in this patch due to 'rx_lro_packets' counter existence. Before, ethtool showed: $ ethtool -S ens6 | egrep "rx_packets|rx_lro_packets" rx_packets: 435277 rx_lro_packets: 35847 rx_packets_phy: 1935066 Now, we will see the more logical statistics: $ ethtool -S ens6 | egrep "rx_packets|rx_lro_packets" rx_packets: 1935066 rx_lro_packets: 35847 rx_packets_phy: 1935066 Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Gal Pressman <galp@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Count GSO packets correctlyGal Pressman2017-03-301-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d3a4e4da54c7adb420d5f48e89be913b14bdeff1 ] TX packets statistics ('tx_packets' counter) used to count GSO packets as one, even though it contains multiple segments. This patch will increment the counter by the number of segments, and align the driver with the behavior of other drivers in the stack. Note that no information is lost in this patch due to 'tx_tso_packets' counter existence. Before, ethtool showed: $ ethtool -S ens6 | egrep "tx_packets|tx_tso_packets" tx_packets: 61340 tx_tso_packets: 60954 tx_packets_phy: 2451115 Now, we will see the more logical statistics: $ ethtool -S ens6 | egrep "tx_packets|tx_tso_packets" tx_packets: 2451115 tx_tso_packets: 60954 tx_packets_phy: 2451115 Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Gal Pressman <galp@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5: Increase number of max QPs in default profileMaor Gottlieb2017-03-301-1/+1
| | | | | | | | | | | | | | [ Upstream commit 5f40b4ed975c26016cf41953b7510fe90718e21c ] With ConnectX-4 sharing SRQs from the same space as QPs, we hit a limit preventing some applications to allocate needed QPs amount. Double the size to 256K. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Use the proper UAPI values when offloading TC vlan actionsOr Gerlitz2017-03-301-2/+4
| | | | | | | | | | | | | | | [ Upstream commit 09c91ddf2cd33489c2c14edfef43ae38d412888e ] Currently we use the non UAPI values and we miss erring on the modify action which is not supported, fix that. Fixes: 8b32580df1cb ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5: Add missing entries for set/query rate limit commandsOr Gerlitz2017-03-301-0/+4
| | | | | | | | | | | | | | | [ Upstream commit 1f30a86c58093046dc3e49c23d2618894e098f7a ] The switch cases for the rate limit set and query commands were missing, which could get us wrong under fw error or driver reset flow, fix that. Fixes: 1466cc5b23d1 ('net/mlx5: Rate limit tables support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: vrf: Reset rt6i_idev in local dst after putDavid Ahern2017-03-301-1/+3
| | | | | | | | | | | | | | | | | | [ Upstream commit 3dc857f0e8fc22610a59cbb346ba62c6e921863f ] The VRF driver takes a reference to the inet6_dev on the VRF device for its rt6_local dst when handling local traffic through the VRF device as a loopback. When the device is deleted the driver does a put on the idev but does not reset rt6i_idev in the rt6_info struct. When the dst is destroyed, dst_destroy calls ip6_dst_destroy which does a second put for what is essentially the same reference causing it to be prematurely freed. Reset rt6i_idev after the put in the vrf driver. Fixes: b4869aa2f881e ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* qmi_wwan: add Dell DW5811eBjørn Mork2017-03-301-0/+2
| | | | | | | | | | | | [ Upstream commit 6bd845d1cf98b45c634baacb8381436dad3c2dd0 ] This is a Dell branded Sierra Wireless EM7455. It is operating in MBIM mode by default, but can be configured to provide two QMI/RMNET functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* amd-xgbe: Fix jumbo MTU processing on newer hardwareLendacky, Thomas2017-03-303-50/+78
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 622c36f143fc9566ba49d7cec994c2da1182d9e2 ] Newer hardware does not provide a cumulative payload length when multiple descriptors are needed to handle the data. Once the MTU increases beyond the size that can be handled by a single descriptor, the SKB does not get built properly by the driver. The driver will now calculate the size of the data buffers used by the hardware. The first buffer of the first descriptor is for packet headers or packet headers and data when the headers can't be split. Subsequent descriptors in a multi-descriptor chain will not use the first buffer. The second buffer is used by all the descriptors in the chain for payload data. Based on whether the driver is processing the first, intermediate, or last descriptor it can calculate the buffer usage and build the SKB properly. Tested and verified on both old and new hardware. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabledFlorian Fainelli2017-03-301-2/+4
| | | | | | | | | | | | [ Upstream commit 5371bbf4b295eea334ed453efa286afa2c3ccff3 ] Suspending the PHY would be putting it in a low power state where it may no longer allow us to do Wake-on-LAN. Fixes: cc013fb48898 ("net: bcmgenet: correctly suspend and resume PHY device") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ibmveth: calculate gso_segs for large packetsThomas Falcon2017-03-221-2/+10
| | | | | | | | | | | | | | [ Upstream commit 94acf164dc8f1184e8d0737be7125134c2701dbe ] Include calculations to compute the number of segments that comprise an aggregated large packet. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jonathan Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* igb: add i211 to i210 PHY workaroundTodd Fujinaka2017-03-221-1/+1
| | | | | | | | | | | | | [ Upstream commit 5bc8c230e2a993b49244f9457499f17283da9ec7 ] i210 and i211 share the same PHY but have different PCI IDs. Don't forget i211 for any i210 workarounds. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* igb: Workaround for igb i210 firmware issueChris J Arges2017-03-221-0/+4
| | | | | | | | | | | | | | | | [ Upstream commit 4e684f59d760a2c7c716bb60190783546e2d08a1 ] Sometimes firmware may not properly initialize I347AT4_PAGE_SELECT causing the probe of an igb i210 NIC to fail. This patch adds an addition zeroing of this register during igb_get_phy_id to workaround this issue. Thanks for Jochen Henneberg for the idea and original patch. Signed-off-by: Chris J Arges <christopherarges@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tun: fix premature POLLOUT notification on tun devicesHannes Frederic Sowa2017-03-221-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b20e2d54789c6acbf6bd0efdbec2cf5fa4d90ef1 ] aszlig observed failing ssh tunnels (-w) during initialization since commit cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE"). We already had reports that the mentioned commit breaks Juniper VPN connections. I can't clearly say that the Juniper VPN client has the same problem, but it is worth a try to hint to this patch. Because of the early generation of link local addresses, the kernel now can start asking for routers on the local subnet much earlier than usual. Those router solicitation packets arrive inside the ssh channels and should be transmitted to the tun fd before the configuration scripts might have upped the interface and made it ready for transmission. ssh polls on the interface and receives back a POLL_OUT. It tries to send the earily router solicitation packet to the tun interface. Unfortunately it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh doesn't retry again and considers the tun interface broken forever. Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131 Fixes: cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE") Cc: Bjørn Mork <bjorn@mork.no> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reported-by: Jonas Lippuner <jonas@lippuner.ca> Cc: Jonas Lippuner <jonas@lippuner.ca> Reported-by: aszlig <aszlig@redmoonstudios.org> Cc: aszlig <aszlig@redmoonstudios.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vrf: Fix use-after-free in vrf_xmitDavid Ahern2017-03-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f7887d40e541f74402df0684a1463c0a0bb68c68 ] KASAN detected a use-after-free: [ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0 [ 269.467067] Read of size 4 by task ssh/1879 [ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249 [ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 269.467067] Call Trace: [ 269.467067] dump_stack+0x81/0xb6 [ 269.467067] kasan_object_err+0x21/0x78 [ 269.467067] kasan_report+0x2f7/0x450 [ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf] [ 269.467067] ? ip_output+0xa4/0xdb [ 269.467067] __asan_load4+0x6b/0x6d [ 269.467067] vrf_xmit+0x7f1/0x827 [vrf] ... Which corresponds to the skb access after xmit handling. Fix by saving skb->len and using the saved value to update stats. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlxsw: spectrum_router: Avoid potential packets lossIdo Schimmel2017-03-221-10/+20
| | | | | | | | | | | | | | | | [ Upstream commit f7df4923fa986247e93ec2cdff5ca168fff14dcf ] When the structure of the LPM tree changes (f.e., due to the addition of a new prefix), we unbind the old tree and then bind the new one. This may result in temporary packet loss. Instead, overwrite the old binding with the new one. Fixes: 6b75c4807db3 ("mlxsw: spectrum_router: Add virtual router management") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* geneve: lock RCU on TX pathJakub Kicinski2017-03-221-2/+8
| | | | | | | | | | | | [ Upstream commit a717e3f740803cc88bd5c9a70c93504f6a368663 ] There is no guarantees that callers of the TX path will hold the RCU lock. Grab it explicitly. Fixes: fceb9c3e3825 ("geneve: avoid using stale geneve socket.") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vxlan: lock RCU on TX pathJakub Kicinski2017-03-221-5/+8
| | | | | | | | | | | | [ Upstream commit 56de859e9967c070464a9a9f4f18d73f9447298e ] There is no guarantees that callers of the TX path will hold the RCU lock. Grab it explicitly. Fixes: c6fcc4fc5f8b ("vxlan: avoid using stale vxlan socket.") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: phy: Avoid deadlock during phy_error()Florian Fainelli2017-03-221-5/+9
| | | | | | | | | | | | | | | | | [ Upstream commit eab127717a6af54401ba534790c793ec143cd1fc ] phy_error() is called in the PHY state machine workqueue context, and calls phy_trigger_machine() which does a cancel_delayed_work_sync() of the workqueue we execute from, causing a deadlock situation. Augment phy_trigger_machine() machine with a sync boolean indicating whether we should use cancel_*_sync() or just cancel_*_work(). Fixes: 3c293f4e08b5 ("net: phy: Trigger state machine on state change and not polling.") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vxlan: don't allow overwrite of config src addrBrian Russell2017-03-221-7/+5
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1158632b5a2dcce0786c1b1b99654e81cc867981 ] When using IPv6 transport and a default dst, a pointer to the configured source address is passed into the route lookup. If no source address is configured, then the value is overwritten. IPv6 route lookup ignores egress ifindex match if the source address is set, so if egress ifindex match is desired, the source address must be passed as any. The overwrite breaks this for subsequent lookups. Avoid this by copying the configured address to an existing stack variable and pass a pointer to that instead. Fixes: 272d96a5ab10 ("net: vxlan: lwt: Use source ip address during route lookup.") Signed-off-by: Brian Russell <brussell@brocade.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vxlan: correctly validate VXLAN ID against VXLAN_N_VIDMatthias Schiffer2017-03-221-1/+1
| | | | | | | | | | | | | [ Upstream commit 4e37d6911f36545b286d15073f6f2222f840e81c ] The incorrect check caused an off-by-one error: the maximum VID 0xffffff was unusable. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Fix wrong CQE decompressionTariq Toukan2017-03-221-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 36154be40a28e4afaa0416da2681d80b7e2ca319 ] In cqe compression with striding RQ, the decompression of the CQE field wqe_counter was done with a wrong wraparound value. This caused handling cqes with a wrong pointer to wqe (rx descriptor) and creating SKBs with wrong data, pointing to wrong (and already consumed) strides/pages. The meaning of the CQE field wqe_counter in striding RQ holds the stride index instead of the WQE index. Hence, when decompressing a CQE, wqe_counter should have wrapped-around the number of strides in a single multi-packet WQE. We dropped this wrap-around mask at all in CQE decompression of striding RQ. It is not needed as in such cases the CQE compression session would break because of different value of wqe_id field, starting a new compression session. Tested: ethtool -K ethxx lro off/on ethtool --set-priv-flags ethxx rx_cqe_compress on super_netperf 16 {ipv4,ipv6} -t TCP_STREAM -m 50 -D verified no csum errors and no page refcount issues. Fixes: 7219ab34f184 ("net/mlx5e: CQE compression") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Tom Herbert <tom@herbertland.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Do not reduce LRO WQE size when not using build_skbTariq Toukan2017-03-221-6/+5
| | | | | | | | | | | | | [ Upstream commit 4078e637c12f1e0a74293f1ec9563f42bff14a03 ] When rq_type is Striding RQ, no room of SKB_RESERVE is needed as SKB allocation is not done via build_skb. Fixes: e4b85508072b ("net/mlx5e: Slightly reduce hardware LRO size") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Register/unregister vport representors on interface attach/detachSaeed Mahameed2017-03-221-8/+15
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 6f08a22c5fb2b9aefb8ecd8496758e7a677c1fde ] Currently vport representors are added only on driver load and removed on driver unload. Apparently we forgot to handle them when we added the seamless reset flow feature. This caused to leave the representors netdevs alive and active with open HW resources on pci shutdown and on error reset flows. To overcome this we move their handling to interface attach/detach, so they would be cleaned up on shutdown and recreated on reset flows. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cpmac: remove hopeless #warningArnd Bergmann2017-03-181-1/+1
| | | | | | | | | | | | | | | | | commit d43e6fb4ac4abfe4ef7c102833ed02330ad701e0 upstream. The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bcm63xx_enet: avoid uninitialized variable warningArnd Bergmann2017-03-181-2/+4
| | | | | | | | | | | | | | | | | | | commit df384d435a5c034c735df3d9ea87a03172c59b56 upstream. gcc-7 and probably earlier versions get confused by this function and print a harmless warning: drivers/net/ethernet/broadcom/bcm63xx_enet.c: In function 'bcm_enet_open': drivers/net/ethernet/broadcom/bcm63xx_enet.c:1130:3: error: 'phydev' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an initialization for the 'phydev' variable when it is unused and changes the check to test for that NULL pointer to make it clear that we always pass a valid pointer here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: fix incorrect event channel deductionGavin Li2017-03-151-1/+1
| | | | | | | | | | | | | | | | | | | | commit 8e290cecdd0178f3d4cf7d463c51dc7e462843b4 upstream. brcmf_sdio_fromevntchan() was being called on the the data frame rather than the software header, causing some frames to be mischaracterized as on the event channel rather than the data channel. This fixes a major performance regression (due to dropped packets). With this patch the download speed jumped from 1Mbit/s back up to 40MBit/s due to the sheer amount of packets being incorrectly processed. Fixes: c56caa9db8ab ("brcmfmac: screening firmware event packet") Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [kvalo@codeaurora.org: improve commit logs based on email discussion] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()Thomas Petazzoni2017-03-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 239a3b663647869330955ec59caac0100ef9b60a upstream. When TX descriptors are filled in, the buffer DMA address is split between the tx_desc->buf_phys_addr field (high-order bits) and tx_desc->packet_offset field (5 low-order bits). However, when we re-calculate the DMA address from the TX descriptor in mvpp2_txq_inc_put(), we do not take tx_desc->packet_offset into account. This means that when the DMA address is not aligned on a 32 bytes boundary, we end up calling dma_unmap_single() with a DMA address that was not the one returned by dma_map_single(). This inconsistency is detected by the kernel when DMA_API_DEBUG is enabled. We fix this problem by properly calculating the DMA address in mvpp2_txq_inc_put(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl8192c-common: Fix "BUG: KASAN:Larry Finger2017-03-122-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6773386f977ce5af339f9678fa2918909a946c6b upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: Fix alignment issuesPing-Ke Shih2017-03-122-2/+2
| | | | | | | | | | | | | | | | | commit 40b368af4b750863b2cb66a3a9513241db2f0793 upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: usb_8dev: Fix memory leak of priv->cmd_msg_bufferMarc Kleine-Budde2017-03-121-6/+3
| | | | | | | | | | | | commit 7c42631376306fb3f34d51fda546b50a9b6dd6ec upstream. The priv->cmd_msg_buffer is allocated in the probe function, but never kfree()ed. This patch converts the kzalloc() to resource-managed kzalloc. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: gs_usb: Don't use stack memory for USB transfersEthan Zonca2017-03-121-11/+29
| | | | | | | | | | | | | | | commit c919a3069c775c1c876bec55e00b2305d5125caa upstream. Fixes: 05ca5270005c can: gs_usb: add ethtool set_phys_id callback to locate physical device The gs_usb driver is performing USB transfers using buffers allocated on the stack. This causes the driver to not function with vmapped stacks. Instead, allocate memory for the transfer buffers. Signed-off-by: Ethan Zonca <e@ethanzonca.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: use correct OTP register offsets for the AR9340 and AR9550Christian Lamparter2017-03-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit c9f1e32600816d695f817477d56490bfc2ba43c6 upstream. This patch fixes the OTP register definitions for the AR934x and AR9550 WMAC SoC. Previously, the ath9k driver was unable to initialize the integrated WMAC on an Aerohive AP121: | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 | ath: phy0: Unable to initialize hardware; initialization status: -5 | ath9k ar934x_wmac: failed to initialize device | ath9k: probe of ar934x_wmac failed with error -5 It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA definitions contain a typo. Cc: Gabor Juhos <juhosg@openwrt.org> Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550" Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: fix race condition in enabling/disabling IRQsFelix Fietkau2017-03-125-26/+48
| | | | | | | | | | | | | | | | | | | | | | | | commit 3a5e969bb2f6692a256352649355d56d018d6b88 upstream. The code currently relies on refcounting to disable IRQs from within the IRQ handler and re-enabling them again after the tasklet has run. However, due to race conditions sometimes the IRQ handler might be called twice, or the tasklet may not run at all (if interrupted in the middle of a reset). This can cause nasty imbalances in the irq-disable refcount which will get the driver permanently stuck until the entire radio has been stopped and started again (ath_reset will not recover from this). Instead of using this fragile logic, change the code to ensure that running the irq handler during tasklet processing is safe, and leave the refcount untouched. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath5k: drop bogus warning on drv_set_key with unsupported cipherFelix Fietkau2017-03-121-2/+1
| | | | | | | | | | | commit a70e1d6fd6b5e1a81fa6171600942bee34f5128f upstream. Simply return -EOPNOTSUPP instead. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath10k: fix boot failure in UTF mode/testmodeTamizh chelvam2017-03-121-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | commit cb4281528b62207918b1e95827cad7527aa4dbaa upstream. Rx filter reset and the dynamic tx switch mode (EXT_RESOURCE_CFG) configuration are causing the following errors when UTF firmware is loaded to the target. Error message 1: [ 598.015629] ath10k_pci 0001:01:00.0: failed to ping firmware: -110 [ 598.020828] ath10k_pci 0001:01:00.0: failed to reset rx filter: -110 [ 598.141556] ath10k_pci 0001:01:00.0: failed to start core (testmode): -110 Error message 2: [ 668.615839] ath10k_ahb a000000.wifi: failed to send ext resource cfg command : -95 [ 668.618902] ath10k_ahb a000000.wifi: failed to start core (testmode): -95 Avoiding these configurations while bringing the target in testmode is solving the problem. Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/downMichael Schenk2017-02-261-0/+18
| | | | | | | | | | | | | | | commit 575ddce0507789bf9830d089557d2199d2f91865 upstream. In the function rtl_usb_start we pre-allocate a certain number of urbs for RX path but they will not be freed when calling rtl_usb_stop. This results in leaking urbs when doing ifconfig up and down. Eventually, the system has no available urbs. Signed-off-by: Michael Schenk <michael.schenk@albis-elcon.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vxlan: fix oops in dev_fill_metadata_dstPaolo Abeni2017-02-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 22f0708a718daea5e79de2d29b4829de016a4ff4 ] Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device") vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL dst_cache pointer, so the latter should explicitly check for valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") removed said check. As a result is possible to trigger a null pointer access calling vxlan_fill_metadata_dst(), e.g. with: ovs-vsctl add-br ovs-br0 ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \ type=vxlan options:remote_ip=192.168.1.1 \ options:key=1234 options:dst_port=4789 ofport_request=10 ip address add dev ovs-br0 172.16.1.2/24 ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \ targets=\"172.16.1.1:1234\" sampling=1 iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234 This commit addresses the issue passing to vxlan_get_route() the dst_cache already available into the lwt info processed by vxlan_fill_metadata_dst(). Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: ethernet: ti: cpsw: fix cpsw assignment in resumeIvan Khoronzhuk2017-02-261-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit a60ced990e309666915d21445e95347d12406694 ] There is a copy-paste error, which hides breaking of resume for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev) in suspend, but left it unchanged in resume. Fixes: 606f39939595a4d4540406bfc11f265b2036af6d (ti: cpsw: move platform data and slaves info to cpsw_common) Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Disable preemption when doing TC statistics upcallOr Gerlitz2017-02-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fed06ee89b78d3af32e235e0e89ad0d946fcb95d ] When called by HW offloading drivers, the TC action (e.g net/sched/act_mirred.c) code uses this_cpu logic, e.g _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets) per the kernel documention, preemption should be disabled, add that. Before the fix, when running with CONFIG_PREEMPT set, we get a BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793 asserion from the TC action (mirred) stats_update callback. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5: Don't unlock fte while still using itMark Bloch2017-02-181-2/+4
| | | | | | | | | | | | | | commit 0fd758d6112f867b2cc6df0f6a856048ff99b211 upstream. When adding a new rule to an fte, we need to hold the fte lock until we add that rule to the fte and increase the fte ref count. Fixes: 0c56b97503fd ("net/mlx5_core: Introduce flow steering API") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: introduce device min_header_lenWillem de Bruijn2017-02-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 217e6fa24ce28ec87fca8da93c9016cb78028612 ] The stack must not pass packets to device drivers that are shorter than the minimum link layer header length. Previously, packet sockets would drop packets smaller than or equal to dev->hard_header_len, but this has false positives. Zero length payload is used over Ethernet. Other link layer protocols support variable length headers. Support for validation of these protocols removed the min length check for all protocols. Introduce an explicit dev->min_header_len parameter and drop all packets below this value. Initially, set it to non-zero only for Ethernet and loopback. Other protocols can follow in a patch to net-next. Fixes: 9ed988cd5915 ("packet: validate variable length ll headers") Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlx4: Invoke softirqs after napi_rescheduleBenjamin Poirier2017-02-181-1/+4
| | | | | | | | | | | | | | | | | | | | [ Upstream commit bd4ce941c8d5b862b2f83364be5dbe8fc8ab48f8 ] mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run in a deterministic time frame and the following message may be logged: NOHZ: local_softirq_pending 08 The problem is the same as what was described in commit ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule") and this patch applies the same fix to mlx4. Fixes: 07841f9d94c1 ("net/mlx4_en: Schedule napi when RX buffers allocation fails") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* catc: Use heap buffer for memory size testBen Hutchings2017-02-181-7/+18
| | | | | | | | | | | | [ Upstream commit 2d6a0e9de03ee658a9adc3bfb2f0ca55dff1e478 ] Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* catc: Combine failure cleanup code in catc_probe()Ben Hutchings2017-02-181-16/+17
| | | | | | | | [ Upstream commit d41149145f98fe26dcd0bfd1d6cc095e6e041418 ] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtl8150: Use heap buffers for all register accessBen Hutchings2017-02-181-7/+27
| | | | | | | | | | | | [ Upstream commit 7926aff5c57b577ab0f43364ff0c59d968f6a414 ] Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pegasus: Use heap buffers for all register accessBen Hutchings2017-02-181-4/+25
| | | | | | | | | | | | | | | [ Upstream commit 5593523f968bc86d42a035c6df47d5e0979b5ace ] Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") References: https://bugs.debian.org/852556 Reported-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Tested-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* macvtap: read vnet_hdr_size onceWillem de Bruijn2017-02-181-2/+2
| | | | | | | | | | | | | | | | | | [ Upstream commit 837585a5375c38d40361cfe64e6fd11e1addb936 ] When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Macvtap functions read the value once, but unless READ_ONCE is used, the compiler may ignore this and read multiple times. Enforce a single read and locally cached value to avoid updates between test and use. Signed-off-by: Willem de Bruijn <willemb@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tun: read vnet_hdr_sz onceWillem de Bruijn2017-02-181-4/+6
| | | | | | | | | | | | | | | | | | [ Upstream commit e1edab87faf6ca30cd137e0795bc73aa9a9a22ec ] When IFF_VNET_HDR is enabled, a virtio_net header must precede data. Data length is verified to be greater than or equal to expected header length tun->vnet_hdr_sz before copying. Read this value once and cache locally, as it can be updated between the test and use (TOCTOU). Signed-off-by: Willem de Bruijn <willemb@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-08 13:45:19 +0000