summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
...
* net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB valuesDoug Berger2017-12-202-10/+60
| | | | | | | | | | | | | | | | [ Upstream commit ffff71328a3c321f7c14cc1edd33577717037744 ] The location of the RBUF overflow and error counters has moved between different version of the GENET MAC. This commit corrects the driver to read from the correct locations depending on the version of the GENET MAC. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Ignore 0 value in autoneg supported speed from firmware.Michael Chan2017-12-201-2/+3
| | | | | | | | | | | | | | | [ Upstream commit 520ad89a54edea84496695d528f73ddcf4a52ea4 ] In some situations, the firmware will return 0 for autoneg supported speed. This may happen if the firmware detects no SFP module, for example. The driver should ignore this so that we don't end up with an invalid autoneg setting with nothing advertised. When SFP module is inserted, we'll get the updated settings from firmware at that time. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipvlan: fix ipv6 outbound deviceKeefe Liu2017-12-161-1/+1
| | | | | | | | | | | | | [ Upstream commit ca29fd7cce5a6444d57fb86517589a1a31c759e1 ] When process the outbound packet of ipv6, we should assign the master device to output device other than input device. Signed-off-by: Keefe Liu <liuqifa@huawei.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* stmmac: reset last TSO segment size after device openLars Persson2017-12-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 45ab4b13e46325d00f4acdb365d406e941a15f81 ] The mss variable tracks the last max segment size sent to the TSO engine. We do not update the hardware as long as we receive skb:s with the same value in gso_size. During a network device down/up cycle (mapped to stmmac_release() and stmmac_open() callbacks) we issue a reset to the hardware and it forgets the setting for mss. However we did not zero out our mss variable so the next transmission of a gso packet happens with an undefined hardware setting. This triggers a hang in the TSO engine and eventuelly the netdev watchdog will bark. Fixes: f748be531d70 ("stmmac: support new GMAC4") Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbnet: fix alignment for frames with no ethernet headerBjørn Mork2017-12-162-1/+6
| | | | | | | | | | | | | | | | | | [ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ] The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <jay@systech.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: qmi_wwan: add Quectel BG96 2c7c:0296Sebastian Sjoholm2017-12-161-0/+1
| | | | | | | | | | | | | | [ Upstream commit f9409e7f086fa6c4623769b4b2f4f17a024d8143 ] Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to qmi_wwan.c to allow QMI communication with the BG96. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()Ben Hutchings2017-12-141-1/+4
| | | | | | | | | | | | | | | [ Upstream commit 67bd52386125ce1159c0581cbcd2740addf33cd4 ] hwsim_new_radio_nl() now copies the name attribute in order to add a null-terminator. mac80211_hwsim_new_radio() (indirectly) copies it again into the net_device structure, so the first copy is not used or freed later. Free the first copy before returning. Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ibmvnic: Allocate number of rx/tx buffers agreed on by firmwareThomas Falcon2017-12-141-8/+8
| | | | | | | | | | | | | | [ Upstream commit 068d9f90a6978c3e3a662d9e85204a7d6be240d2 ] The amount of TX/RX buffers that the vNIC driver currently allocates is different from the amount agreed upon in negotiation with firmware. Correct that by allocating the requested number of buffers confirmed by firmware. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ibmvnic: Fix overflowing firmware/hardware TX queueThomas Falcon2017-12-142-1/+27
| | | | | | | | | | | | | | | | | | | [ Upstream commit 142c0ac445792c492579cb01f1cfd4e32e6dfcce ] Use a counter to track the number of outstanding transmissions sent that have not received completions. If the counter reaches the maximum number of queue entries, stop transmissions on that queue. As we receive more completions from firmware, wake the queue once the counter reaches an acceptable level. This patch prevents hardware/firmware TX queue from filling up and and generating errors. Since incorporating this fix, internal testing has reported that these firmware errors have stopped. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnx2x: do not rollback VF MAC/VLAN filters we did not configureMichal Schmidt2017-12-142-1/+8
| | | | | | | | | | | | [ Upstream commit 78d5505432436516456c12abbe705ec8dee7ee2b ] On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnx2x: fix detection of VLAN filtering feature for VFMichal Schmidt2017-12-141-5/+11
| | | | | | | | | | | | | | [ Upstream commit 83bd9eb8fc69cdd5135ed6e1f066adc8841800fd ] VFs are currently missing the VLAN filtering feature, because we were checking the PF's acquire response before actually performing the acquire. Fix it by setting the feature flag later when we have the PF response. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnx2x: fix possible overrun of VFPF multicast addresses arrayMichal Schmidt2017-12-141-12/+11
| | | | | | | | | | | | | | | | | [ Upstream commit 22118d861cec5da6ed525aaf12a3de9bfeffc58f ] It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnx2x: prevent crash when accessing PTP with interface downMichal Schmidt2017-12-141-1/+19
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 466e8bf10ac104d96e1ea813e8126e11cb72ea20 ] It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi_ks8995: regs_size incorrect for some devicesBlomme, Maarten2017-12-141-1/+1
| | | | | | | | | [ Upstream commit 239870f2a0ebf75cc8f6d987dc528c5243f93d69 ] Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi_ks8995: fix "BUG: key accdaa28 not in .data!"Blomme, Maarten2017-12-141-0/+1
| | | | | | | | | [ Upstream commit 4342696df764ec65dcdfbd0c10d90ea52505f8ba ] Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: change driver unbind order of the sdio function devicesArend Van Spriel2017-12-141-1/+1
| | | | | | | | | | | | | | | | | | | | | commit 5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 upstream. In the function brcmf_sdio_firmware_callback() the driver is unbound from the sdio function devices in the error path. However, the order in which it is done resulted in a use-after-free issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change the order and first unbind sdio function #2 device and then unbind sdio function #1 device. Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: usb_8dev: cancel urb on -EPIPE and -EPROTOMartin Kelly2017-12-141-0/+2
| | | | | | | | | | | | | | | | | commit 12147edc434c9e4c7c2f5fee2e5519b2e5ac34ce upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: esd_usb2: cancel urb on -EPIPE and -EPROTOMartin Kelly2017-12-141-0/+2
| | | | | | | | | | | | | | | | | commit 7a31ced3de06e9878e4f9c3abe8f87d9344d8144 upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: ems_usb: cancel urb on -EPIPE and -EPROTOMartin Kelly2017-12-141-0/+2
| | | | | | | | | | | | | | | | | commit bd352e1adfe0d02d3ea7c8e3fb19183dc317e679 upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: kvaser_usb: cancel urb on -EPIPE and -EPROTOMartin Kelly2017-12-141-0/+2
| | | | | | | | | | | | | | | | | commit 6aa8d5945502baf4687d80de59b7ac865e9e666b upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: kvaser_usb: ratelimit errors if incomplete messages are receivedJimmy Assarsson2017-12-141-3/+4
| | | | | | | | | | | | commit 8bd13bd522ff7dfa0eb371921aeb417155f7a3be upstream. Avoid flooding the kernel log with "Formate error", if incomplete message are received. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()Jimmy Assarsson2017-12-141-1/+1
| | | | | | | | | | | | | | | | | | | commit e84f44eb5523401faeb9cc1c97895b68e3cfb78d upstream. The conditon in the while-loop becomes true when actual_length is less than 2 (MSG_HEADER_LEN). In best case we end up with a former, already dispatched msg, that got msg->len greater than actual_length. This will result in a "Format error" error printout. Problem seen when unplugging a Kvaser USB device connected to a vbox guest. warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: kvaser_usb: free buf in error pathsJimmy Assarsson2017-12-141-0/+2
| | | | | | | | | | | commit 435019b48033138581a6171093b181fc6b4d3d30 upstream. The allocated buffer was not freed if usb_submit_urb() failed. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: ti_hecc: Fix napi poll return value for repollOliver Stäbler2017-12-141-0/+3
| | | | | | | | | | | | | commit f6c23b174c3c96616514827407769cbcfc8005cf upstream. After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. So we need to return budget if there are still packets to receive. Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen-netfront: avoid crashing on resume after a failure in talk_to_netback()Vitaly Kuznetsov2017-12-091-2/+1
| | | | | | | | | | | | | | | | | | | | commit d86b5672b1adb98b4cdd6fbf0224bbfb03db6e2e upstream. Unavoidable crashes in netfront_resume() and netback_changed() after a previous fail in talk_to_netback() (e.g. when we fail to read MAC from xenstore) were discovered. The failure path in talk_to_netback() does unregister/free for netdev but we don't reset drvdata and we try accessing it after resume. Fix the bug by removing the whole xen device completely with device_unregister(), this guarantees we won't have any calls into netfront after a failure. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fec: fix multicast filtering hardware setupRui Sousa2017-12-091-14/+9
| | | | | | | | | | | | | | | [ Upstream commit 01f8902bcf3ff124d0aeb88a774180ebcec20ace ] Fix hardware setup of multicast address hash: - Never clear the hardware hash (to avoid packet loss) - Construct the hash register values in software and then write once to hardware Signed-off-by: Rui Sousa <rui.sousa@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen-netback: vif counters from int/long to u64Mart van Santen2017-12-092-8/+8
| | | | | | | | | | | | | | | | [ Upstream commit ebf692f85ff78092cd238166d8d7ec51419f9c02 ] This patch fixes an issue where the type of counters in the queue(s) and interface are not in sync (queue counters are int, interface counters are long), causing incorrect reporting of tx/rx values of the vif interface and unclear counter overflows. This patch sets both counters to the u64 type. Signed-off-by: Mart van Santen <mart@greenhost.nl> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen-netfront: Improve error handling during initializationRoss Lagerwall2017-12-091-18/+11
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e2e004acc7cbe3c531e752a270a74e95cde3ea48 ] This fixes a crash when running out of grant refs when creating many queues across many netdevs. * If creating queues fails (i.e. there are no grant refs available), call xenbus_dev_fatal() to ensure that the xenbus device is set to the closed state. * If no queues are created, don't call xennet_disconnect_backend as netdev->real_num_tx_queues will not have been set correctly. * If setup_netfront() fails, ensure that all the queues created are cleaned up, not just those that have been set up. * If any queues were set up and an error occurs, call xennet_destroy_queues() to clean up the napi context. * If any fatal error occurs, unregister and destroy the netdev to avoid leaving around a half setup network device. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* be2net: fix initial MAC settingIvan Vecera2017-12-091-5/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4993b39ab04b083ff6ee1147e7e7f120feb6bf7f ] Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") allows privileged BE3 VFs to set its MAC address during initialization. Although the initial MAC for such VFs is already programmed by parent PF the subsequent setting performed by VF is OK, but in certain cases (after fresh boot) this command in VF can fail. The MAC should be initialized only when: 1) no MAC is programmed (always except BE3 VFs during first init) 2) programmed MAC is different from requested (e.g. MAC is set when interface is down). In this case the initial MAC programmed by PF needs to be deleted. The adapter->dev_mac contains MAC address currently programmed in HW so it should be zeroed when the MAC is deleted from HW and should not be filled when MAC is set when interface is down in be_mac_addr_set() as no programming is performed in this case. Example of failure without the fix (immediately after fresh boot): # ip link set eth0 up <- eth0 is BE3 PF be2net 0000:01:00.0 eth0: Link is Up # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create 1 VF ... be2net 0000:01:04.0: Emulex OneConnect(be3): VF port 0 # ip link set eth8 up <- eth8 is created privileged VF be2net 0000:01:04.0: opcode 59-1 failed:status 1-76 RTNETLINK answers: Input/output error # echo 0 > /sys/class/net/eth0/device/sriov_numvfs <- Delete VF iommu: Removing device 0000:01:04.0 from group 33 ... # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create it again iommu: Removing device 0000:01:04.0 from group 33 ... # ip link set eth8 up be2net 0000:01:04.0 eth8: Link is Up Initialization is now OK. v2 - Corrected the comment and condition check suggested by Suresh & Harsha Fixes: 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: thunderx: avoid dereferencing xcv when NULLVincent2017-12-091-2/+1
| | | | | | | | | | | | | | | | [ Upstream commit c73e44269369e936165f0f9b61f1f09a11dae01c ] This fixes the following smatch and coccinelle warnings: drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch] drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle] Fixes: 6465859aba1e66a5 ("net: thunderx: Add RGMII interface type support") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]PauseSean Nyekjaer2017-12-091-1/+1
| | | | | | | | | | | | | | [ Upstream commit cf626c3b252b2c9d131be0dd66096ec3bf729e54 ] As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gtp: fix cross netns recv on gtp socketAndreas Schultz2017-12-091-6/+4
| | | | | | | | | | | | | | | | | [ Upstream commit 3ab1b469e847ba425af3c5ad5068cc94b55b38d0 ] The use of the passed through netlink src_net to check for a cross netns operation was wrong. Using the GTP socket and the GTP netdevice is always correct (even if the netdev has been moved to new netns after link creation). Remove the now obsolete net field from gtp_dev. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gtp: clear DF bit on GTP packet txAndreas Schultz2017-12-091-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit c6ce1d08eede4c2968ed08aafa3165e8e183c5a1 ] 3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8, Section 13.2.2: > Backbone router: Any router in the backbone may fragment the GTP > packet if needed, according to IPv4. Signed-off-by: Andreas Schultz <aschultz@tpip.net> Acked-by: Harald Welte <laforge@netfilter.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ravb: Remove Rx overflow log messagesKazuya Mizuguchi2017-12-091-6/+2
| | | | | | | | | | | | | | | | | [ Upstream commit 18a3ed59d09cf81a6447aadf6931bf0c9ffec5e0 ] Remove Rx overflow log messages as in an environment where logging results in network traffic logging may cause further overflows. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: reworked changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/appletalk: Fix kernel memory disclosureVlad Tsyrklevich2017-12-091-1/+1
| | | | | | | | | | | | | | [ Upstream commit ce7e40c432ba84da104438f6799d460a4cad41bc ] ipddp_route structs contain alignment padding so kernel heap memory is leaked when they are copied to user space in ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear that memory. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* be2net: fix unicast list fillingIvan Vecera2017-12-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6052cd1af86f9833b6b0b60d5d4787c4a06d65ea ] The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b717241 be2net: replace polling with sleeping in the FW completion path Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* be2net: fix accesses to unicast listIvan Vecera2017-12-091-6/+3
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 1d0f110a2c6c4bca3dbcc4b0e27f1e3dc2d44a2c ] Commit 988d44b "be2net: Avoid redundant addition of mac address in HW" introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly access adapter->uc_list as an array of bytes instead of an array of be_eth_addr. Consequently NIC is not filled with valid data so unicast filtering is broken. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 988d44b be2net: Avoid redundant addition of mac address in HW Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: systemport: Pad packet before inserting TSBFlorian Fainelli2017-12-091-9/+9
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 38e5a85562a6cd911fc26d951d576551a688574c ] Inserting the TSB means adding an extra 8 bytes in front the of packet that is going to be used as metadata information by the TDMA engine, but stripped off, so it does not really help with the packet padding. For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP) we can end-up padding them after the TSB insertion, thus making them 64 bytes, but with the TDMA stripping off the first 8 bytes, they could still be smaller than 64 bytes which is required to ingress the switch. Fix this by swapping the padding and TSB insertion, guaranteeing that the packets have the right sizes. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: systemport: Utilize skb_put_padto()Florian Fainelli2017-12-091-3/+2
| | | | | | | | | | | | | [ Upstream commit bb7da333d0a9f3bddc08f84187b7579a3f68fd24 ] Since we need to pad our packets, utilize skb_put_padto() which increases skb->len by how much we need to pad, allowing us to eliminate the test on skb->len right below. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* libcxgb: fix error check for ip6_route_output()Varun Prakash2017-12-091-7/+5
| | | | | | | | | | | | [ Upstream commit a9a8cdb368d99bb655b5cdabea560446db0527cc ] ip6_route_output() never returns NULL so check dst->error instead of !dst. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx4_en: Fix type mismatch for 32-bit systemsSlava Shwartsman2017-12-091-6/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit 61b6034c6cfdcb265bb453505c3d688e7567727a ] is_power_of_2 expects unsigned long and we pass u64 max_val_cycles, this will be truncated on 32 bit systems, and the result is not what we were expecting. div_u64 expects u32 as a second argument and we pass max_val_cycles_rounded which is u64 hence it will always be truncated. Fix was tested on both 64 and 32 bit systems and got same results for max_val_cycles and max_val_cycles_rounded. Fixes: 4850cf458157 ("net/mlx4_en: Resolve dividing by zero in 32-bit system") Signed-off-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* adm80211: add checks for dma mapping errorsAlexey Khoroshilov2017-11-301-2/+22
| | | | | | | | | | | | | | [ Upstream commit d15697de60db5570532fdedb8e13b2251d65b8e3 ] The driver does not check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath10k: set CTS protection VDEV param only if VDEV is upBartosz Markowski2017-11-301-8/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7cfe0455ee1218add152e986b89b4bb8dbeafcdd ] The cts protection vdev parameter, in new QCA9377 TF2.0 firmware, requires bss peer to be created for the STATION vdev type. bss peer is being allocated by the firmware after vdev_start/_up commands. mac80211 may call the cts protection setup at any time, so the we needs to track the situation and defer the cts configuration to prevent firmware asserts, like below: [00]: 0x05020001 0x000015B3 0x0099ACE2 0x00955B31 [04]: 0x0099ACE2 0x00060730 0x00000004 0x00000000 [08]: 0x0044C754 0x00412C10 0x00000000 0x00409C54 [12]: 0x00000009 0x00000000 0x00952F6C 0x00952F77 [16]: 0x00952CC4 0x00910712 0x00000000 0x00000000 [20]: 0x4099ACE2 0x0040E858 0x00421254 0x004127F4 [24]: 0x8099B9B2 0x0040E8B8 0x00000000 0xC099ACE2 [28]: 0x800B75CB 0x0040E8F8 0x00000007 0x00005008 [32]: 0x809B048A 0x0040E958 0x00000010 0x00433B10 [36]: 0x809AFBBC 0x0040E9A8 0x0042BB74 0x0042BBBC [40]: 0x8091D252 0x0040E9C8 0x0042BBBC 0x00000001 [44]: 0x809FFA45 0x0040EA78 0x0043D3E4 0x0042C2C8 [48]: 0x809FCEF4 0x0040EA98 0x0043D3E4 0x00000001 [52]: 0x80911210 0x0040EAE8 0x00000010 0x004041D0 [56]: 0x80911154 0x0040EB28 0x00400000 0x00000000 Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Set default completion ring for async events.Michael Chan2017-11-301-0/+30
| | | | | | | | | | | | | | | [ Upstream commit 486b5c22ea1d35e00e90dd79a32a9ee530b18915 ] With the added support for the bnxt_re RDMA driver, both drivers can be allocating completion rings in any order. The firmware does not know which completion ring should be receiving async events. Add an extra step to tell firmware the completion ring number for receiving async events after bnxt_en allocates the completion rings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()Christian Lamparter2017-11-301-3/+9
| | | | | | | | | | | | | [ Upstream commit 097e46d2ae90265d1afe141ba6208ba598b79e01 ] ath10k_wmi_tlv_op_pull_fw_stats() uses tb = ath10k_wmi_tlv_parse_alloc(...) function, which allocates memory. If any of the three error-paths are taken, this tb needs to be freed. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath10k: ignore configuring the incorrect board_idRyan Hsu2017-11-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d2e202c06ca42d353d95df12437740921a6d05b5 ] With command to get board_id from otp, in the case of following boot get otp board id result 0x00000000 board_id 0 chip_id 0 boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=0" ... failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=0 from ath10k/QCA6174/hw3.0/board-2.bin The invalid board_id=0 will be used as index to search in the board-2.bin. Ignore the case with board_id=0, as it means the otp is not carrying the board id information. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath10k: fix incorrect txpower set by P2P_DEVICE interfaceRyan Hsu2017-11-301-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 88407beb1b1462f706a1950a355fd086e1c450b6 ] Ath10k reports the phy capability that supports P2P_DEVICE interface. When we use the P2P supported wpa_supplicant to start connection, it'll create two interfaces, one is wlan0 (vdev_id=0) and one is P2P_DEVICE p2p-dev-wlan0 which is for p2p control channel (vdev_id=1). ath10k_pci mac vdev create 0 (add interface) type 2 subtype 0 ath10k_add_interface: vdev_id: 0, txpower: 0, bss_power: 0 ... ath10k_pci mac vdev create 1 (add interface) type 2 subtype 1 ath10k_add_interface: vdev_id: 1, txpower: 0, bss_power: 0 And the txpower in per vif bss_conf will only be set to valid tx power when the interface is assigned with channel_ctx. But this P2P_DEVICE interface will never be used for any connection, so that the uninitialized bss_conf.txpower=0 is assinged to the arvif->txpower when interface created. Since the txpower configuration is firmware per physical interface. So the smallest txpower of all vifs will be the one limit the tx power of the physical device, that causing the low txpower issue on other active interfaces. wlan0: Limiting TX power to 21 (24 - 3) dBm ath10k_pci mac vdev_id 0 txpower 21 ath10k_mac_txpower_recalc: vdev_id: 1, txpower: 0 ath10k_mac_txpower_recalc: vdev_id: 0, txpower: 21 ath10k_pci mac txpower 0 This issue only happens when we use the wpa_supplicant that supports P2P or if we use the iw tool to create the control P2P_DEVICE interface. Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mwifiex: sdio: fix use after free issue for save_adapterAmitkumar Karwar2017-11-301-0/+6
| | | | | | | | | | | | | | [ Upstream commit 74c8719b8ee0922593a5cbec0bd6127d86d8a2f4 ] If we have sdio work requests received when sdio card reset is happening, we may end up accessing older save_adapter pointer later which is already freed during card reset. This patch solves the problem by cancelling those pending requests. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* adm80211: return an error if adm8211_alloc_rings() failsDan Carpenter2017-11-301-1/+2
| | | | | | | | | | | | | [ Upstream commit c705a6b3aa7804d7bc6660183f51e510c61dc807 ] We accidentally return success when adm8211_alloc_rings() fails but we should preserve the error code. Fixes: cc0b88cf5ecf ("[PATCH] Add adm8211 802.11b wireless driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rt2800: set minimum MPDU and PSDU lengths to sane valuesStanislaw Gruszka2017-11-301-2/+2
| | | | | | | | | [ Upstream commit a51b89698ccc93c7e274eb71377fae49c4593ab2 ] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-16 05:54:41 +0000