summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* net: dpaa: avoid one skb_reset_mac_header() in dpaa_enable_tx_csum()Vladimir Oltean2023-04-231-7/+2
| | | | | | | | | | | | | | | | It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header() to get to the VLAN header using skb_mac_header(). We can use skb_vlan_eth_hdr() to get to the VLAN header based on skb->data directly. This avoids spending a few cycles to set skb->mac_header. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: introduce skb_vlan_eth_hdr()Vladimir Oltean2023-04-239-15/+11
| | | | | | | | | | | | | | | | | Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/phy: add driver for Microchip LAN867x 10BASE-T1S PHYRamón Nordin Rodriguez2023-04-233-0/+144
| | | | | | | | | This patch adds support for the Microchip LAN867x 10BASE-T1S family (LAN8670/1/2). The driver supports P2MP with PLCA. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch '100GbE' of ↵David S. Miller2023-04-235-53/+36
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== This series lowers the CPU usage of the ice driver when using its provided /dev/gnss*. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * ice: sleep, don't busy-wait, in the SQ send retry loopMichal Schmidt2023-04-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 10 ms is a lot of time to spend busy-waiting. Sleeping is clearly allowed here, because we have just returned from ice_sq_send_cmd(), which takes a mutex. On kernels with HZ=100, this msleep may be twice as long, but I don't think it matters. I did not actually observe any retries happening here. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: remove unused buffer copy code in ice_sq_send_cmd_retry()Michal Schmidt2023-04-201-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'buf_cpy'-related code in ice_sq_send_cmd_retry() looks broken. 'buf' is nowhere copied into 'buf_cpy'. The reason this does not cause problems is that all commands for which 'is_cmd_for_retry' is true go with a NULL buf. Let's remove 'buf_cpy'. Add a WARN_ON in case the assumption no longer holds in the future. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: sleep, don't busy-wait, for ICE_CTL_Q_SQ_CMD_TIMEOUTMichal Schmidt2023-04-203-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver polls for ice_sq_done() with a 100 µs period for up to 1 s and it uses udelay to do that. Let's use usleep_range instead. We know sleeping is allowed here, because we're holding a mutex (cq->sq_lock). To preserve the total max waiting time, measure the timeout in jiffies. ICE_CTL_Q_SQ_CMD_TIMEOUT is used also in ice_release_res(), but there the polling period is 1 ms (i.e. 10 times longer). Since the timeout was expressed in terms of the number of loops, the total timeout in this function is 10 s. I do not know if this is intentional. This patch keeps it. The patch lowers the CPU usage of the ice-gnss-<dev_name> kernel thread on my system from ~8 % to less than 1 %. I received a report of high CPU usage with ptp4l where the busy-waiting in ice_sq_send_cmd dominated the profile. This patch has been tested in that usecase too and it made a huge improvement there. Tested-by: Brent Rowsell <browsell@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: remove ice_ctl_q_info::sq_cmd_timeoutMichal Schmidt2023-04-203-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | sq_cmd_timeout is initialized to ICE_CTL_Q_SQ_CMD_TIMEOUT and never changed, so just use the constant directly. Suggested-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: increase the GNSS data polling interval to 20 msMichal Schmidt2023-04-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Double the GNSS data polling interval from 10 ms to 20 ms. According to Karol Kolacinski from the Intel team, they have been planning to make this change. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: do not busy-wait to read GNSS dataMichal Schmidt2023-04-202-25/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice-gnss-<dev_name> kernel thread, which reads data from the u-blox GNSS module, keep a CPU core almost 100% busy. The main reason is that it busy-waits for data to become available. A simple improvement would be to replace the "mdelay(10);" in ice_gnss_read() with sleeping. A better fix is to not do any waiting directly in the function and just requeue this delayed work as needed. The advantage is that canceling the work from ice_gnss_exit() becomes immediate, rather than taking up to ~2.5 seconds (ICE_MAX_UBX_READ_TRIES * 10 ms). This lowers the CPU usage of the ice-gnss-<dev_name> thread on my system from ~90 % to ~8 %. I am not sure if the larger 0.1 s pause after inserting data into the gnss subsystem is really necessary, but I'm keeping that as it was. Of course, ideally the driver would not have to poll at all, but I don't know if the E810 can watch for GNSS data availability over the i2c bus by itself and notify the driver. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | net: mtk_eth_soc: mediatek: fix ppe flow accounting for v1 hardwareFelix Fietkau2023-04-232-3/+10
| | | | | | | | | | | | | | | | | | | | Older chips (like MT7622) use a different bit in ib2 to enable hardware counter support. Add macros for both and select the appropriate bit. Fixes: 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'mlx5-updates-2023-04-20' of ↵Jakub Kicinski2023-04-2117-272/+262
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-04-20 1) Dragos Improves RX page pool, and provides some fixes to his previous series: 1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case 1.2) Hook NAPIs to page pools to gain more performance. 2) From Roi, Some cleanups to TC and eswitch modules. 3) Maher migrates vnic diagnostic counters reporting from debugfs to a dedicated devlink health reporter Maher Says: =========== net/mlx5: Expose vnic diagnostic counters using devlink Currently, vnic diagnostic counters are exposed through the following debugfs: $ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/ cq_overrun quota_exceeded_command total_q_under_processor_handle invalid_command send_queue_priority_update_flow nic_receive_steering_discard The current design does not allow the hypervisor to view the diagnostic counters of its VFs, in case the VFs get bound to a VM. In other words, the counters are not exposed for representor interfaces. Furthermore, the debugfs design is inconvenient future-wise, in case more counters need to be reported by the driver in the future. As these counters pertain to vNIC health, it is more appropriate to utilize the devlink health reporter to expose them. Thus, this patchest includes the following changes: * Drop the current vnic diagnostic counters debugfs interface. * Add a vnic devlink health reporter for PFs/VFs core devices, which when diagnosed will dump vnic diagnostic counter values that are queried from FW. * Add a vnic devlink health reporter for the representor interface, which serves the same purpose listed in the previous point, in addition to allowing the hypervisor to view its VFs diagnostic counters, even when the VFs are bounded to external VMs. Example of devlink health reporter usage is: $devlink health diagnose pci/0000:08:00.0 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 =========== 4) SW steering fixes and improvements Yevgeny Kliteynik Says: ======================= These short patch series are just small fixes / improvements for SW steering: - Patch 1: Fix dumping of legacy modify_hdr in debug dump to align to what is expected by parser - Patch 2: Have separate threshold for ICM sync per ICM type - Patch 3: Add more info to the steering debug dump - Linux version and device name - Patch 4: Keep track of number of buddies that are currently in use per domain per buddy type ======================= * tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Update op_mode to op_mod for port selection net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set() net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc() net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn() net/mlx5e: RX, Hook NAPIs to page pools net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ net/mlx5e: Add vnic devlink health reporter to representors net/mlx5: Add vnic devlink health reporter to PFs/VFs Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports" Revert "net/mlx5: Expose steering dropped packets counter" net/mlx5: DR, Add memory statistics for domain object net/mlx5: DR, Add more info in domain dbg dump net/mlx5: DR, Calculate sync threshold of each pool according to its type net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump ==================== Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | net/mlx5: Update op_mode to op_mod for port selectionRoi Dayan2023-04-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | To be consistent with the other enum keys use OP_MOD instead of OP_MODE. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()Roi Dayan2023-04-202-23/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unused function which also seems a duplicate of esw_port_metadata_set(). Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()Roi Dayan2023-04-201-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | The passded esw->dev is redundant as esw being passed and esw->dev being used inside. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()Eli Cohen2023-04-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add include directive to assure pci_msix_can_alloc_dyn() prototype. Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303291328.sNmTyyWF-lkp@intel.com/ Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5e: RX, Hook NAPIs to page poolsDragos Tatulea2023-04-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linking the NAPI to the rq page_pool to improve page_pool cache usage during skb recycling. Here are the observed improvements for a iperf single stream test case: - For 1500 MTU and legacy rq, seeing a 20% improvement of cache usage. - For 9K MTU, seeing 33-40 % page_pool cache usage improvements for both striding and legacy rq (depending if the application is running on the same core as the rq or not). Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear caseDragos Tatulea2023-04-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the XDP handler marks the data for transmission (XDP_TX), it is incorrect to release the page fragment. Instead, the fragments should be marked as MLX5E_WQE_FRAG_SKIP_RELEASE because XDP will release the page directly to the page_pool (page_pool_put_defragged_page) after TX completion. The linear case already does this. This patch fixes the nonlinear part as well. Also, the looping over the fragments was incorrect: When handling pages after XDP_TX in the legacy rq nonlinear case, the loop was skipping the first wqe fragment. Fixes: 3f93f82988bc ("net/mlx5e: RX, Defer page release in legacy rq for better recycling") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQDragos Tatulea2023-04-201-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mlx5e_free_rx_descs is responsible for calling the dealloc_wqe op which returns pages to the page_pool. This can happen during flush or close. For XSK, the regular RQ is flushed (when replaced by the XSK RQ) and also closed later. This is normally not a problem as the wqe list is empty on a second call to mlx5e_free_rx_descs. However, for striding RQ, the previously released wqes from the list will appear as missing and will be released a second time by mlx5e_free_rx_missing_descs. This patch sets the no release bits on the striding RQ wqes in the dealloc_wqe op to prevent releasing the pages a second time. Please note that the bits are set only in the control path during close and not in the data path. Fixes: 4c2a13236807 ("net/mlx5e: RX, Defer page release in striding rq for better recycling") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5e: Add vnic devlink health reporter to representorsMaher Sanalla2023-04-202-2/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new devlink health reporter for representor interface, which reports the values of representor vnic diagnostic counters when diagnosed. This patch will allow admins to monitor VF diagnostic counters through the representor-interface vnic reporter. Example of usage: $ devlink health diagnose pci/0000:08:00.0/65537 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: Add vnic devlink health reporter to PFs/VFsMaher Sanalla2023-04-204-1/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a vnic devlink health reporter for PFs/VFs interfaces. The reporter's diagnose callback displays the values of vNIC/vport transport debug counters of PFs/VFs, as follows: $ devlink health diagnose pci/0000:08:00.0 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 Moreover, add documentation on the reporter functionality and the counters description. While at it, expose the vNIC counters diagnose function to be used by the downstream patch, which will reveal the counters for representor interfaces. Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"Maher Sanalla2023-04-205-197/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 606e6a72e29dff9e3341c4cc9b554420e4793f401 which exposes the vnic diagnostic counters via debugfs. Instead, The upcoming series will expose the same counters through devlink health reporter. Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | Revert "net/mlx5: Expose steering dropped packets counter"Maher Sanalla2023-04-201-19/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 4fe1b3a5f8fe2fdcedcaba9561e5b0ae5cb1d15b, which exposes the steering dropped packets counter via debugfs. The upcoming series will expose the counter via devlink health reporter instead of debugfs. Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: DR, Add memory statistics for domain objectYevgeny Kliteynik2023-04-203-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add counters for number of buddies that are currently in use per domain per buddy type (STE, MODIFY-HEADER, MODIFY-PATTERN). Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: DR, Add more info in domain dbg dumpYevgeny Kliteynik2023-04-201-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | Add additinal items to domain info dump: Linux version and device name. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: DR, Calculate sync threshold of each pool according to its typeYevgeny Kliteynik2023-04-201-15/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When certain ICM chunk is no longer needed, it needs to be freed. Fully freeing ICM memory involves issuing FW SYNC_STEERING command. This is very time consuming, and it is impractical to do it for every freed chunk. Instead, we manage these 'freed' chunks in hot list (list of chunks that are not required by SW any more, but HW might still access them). When size of the hot list reaches certain threshold, we purge it and issue SYNC_STEERING FW command. There is one threshold for all the different ICM types, which is not optimal, as different ICM types require different approach: STEs pool is very large, and it is very 'dynamic' in its nature, so letting hot list to become too large will result in a significant perf hiccup when purging the hot list. Modify action is much smaller and less dynamic, so we can let the hot list to grow to almost the size of the whole pool. This patch fixes this problem: instead of having same hot memory threshold for all the pools, sync operation will be triggered in accordance with the ICM type. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
| * | net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dumpYevgeny Kliteynik2023-04-201-4/+6
| |/ | | | | | | | | | | | | | | | | | | The steering dump parser expects to see 0 as rewrite num of actions in case pattern/args aren't supported - parsing of legacy modify header is based on this assumption. Fix this to align to parser's expectation. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
* | net: dsa: qca8k: fix LEDS_CLASS dependencyArnd Bergmann2023-04-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With LEDS_CLASS=m, a built-in qca8k driver fails to link: arm-linux-gnueabi-ld: drivers/net/dsa/qca/qca8k-leds.o: in function `qca8k_setup_led_ctrl': qca8k-leds.c:(.text+0x1ea): undefined reference to `devm_led_classdev_register_ext' Change the dependency to avoid the broken configuration. Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230420213639.2243388-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: add basic driver for NXP CBTX PHYVladimir Oltean2023-04-213-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CBTX PHY is a Fast Ethernet PHY integrated into the SJA1110 A/B/C automotive Ethernet switches. It was hoped it would work with the Generic PHY driver, but alas, it doesn't. The most important reason why is that the PHY is powered down by default, and it needs a vendor register to power it on. It has a linear memory map that is accessed over SPI by the SJA1110 switch driver, which exposes a fake MDIO controller. It has the following (and only the following) standard clause 22 registers: 0x0: MII_BMCR 0x1: MII_BMSR 0x2: MII_PHYSID1 0x3: MII_PHYSID2 0x4: MII_ADVERTISE 0x5: MII_LPA 0x6: MII_EXPANSION 0x7: the missing MII_NPAGE for Next Page Transmit Register Every other register is vendor-defined. The register map expands the standard clause 22 5-bit address space of 0x20 registers, however the driver does not need to access the extra registers for now (and hopefully never). If it ever needs to do that, it is possible to implement a fake (software) page switching mechanism between the PHY driver and the SJA1110 MDIO controller driver. Also, Auto-MDIX is turned off by default in hardware, the driver turns it on by default and reports the current status. I've tested this with a VSC8514 link partner and a crossover cable, by forcing the mode on the link partner, and seeing that the CBTX PHY always sees the reverse of the mode forced on the VSC8514 (and that traffic works). The link doesn't come up (as expected) if MDI modes are forced on both ends in the same way (with the cross-over cable, that is). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230418190141.1040562-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski2023-04-21223-2582/+22850
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * \ Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo2023-04-2037-228/+481
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ath.git patches for v6.4. Major changes: wcn36xx * support for pronto v3 hardware ath11k * PCIe DeviceTree bindings * WCN6750: enable SAR support ath10k * convert DeviceTree bindings to YAML
| | * | wifi: ath11k: Remove disabling of 80+80 and 160 MHzMuna Sinada2023-04-192-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a regression fix for 80+80 and 160 MHz support bits being cleared, therefore not adverised. Remove disable of 80+80 and 160 MHz capability flags and assign valid center frequency 2 similar to VHT80_80. Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware") Reported-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Robert Marko <robert.marko@sartura.hr> # IPQ8074 WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217299 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1681762947-13882-1-git-send-email-quic_msinada@quicinc.com
| | * | wifi: ath9k: Don't mark channelmap stack variable read-only in ↵Toke Høiland-Jørgensen2023-04-191-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ath9k_mci_update_wlan_channels() This partially reverts commit e161d4b60ae3a5356e07202e0bfedb5fad82c6aa. Turns out the channelmap variable is not actually read-only, it's modified through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function, so making it read-only causes page faults when that code is hit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183 Fixes: e161d4b60ae3 ("wifi: ath9k: Make arrays prof_prio and channelmap static const") Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk
| | * | wifi: ath11k: Fix SKB corruption in REO destination ringNagarajan Maran2023-04-191-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running traffics for a long time, randomly an RX descriptor filled with value "0" from REO destination ring is received. This descriptor which is invalid causes the wrong SKB (SKB stored in the IDR lookup with buffer id "0") to be fetched which in turn causes SKB memory corruption issue and the same leads to crash after some time. Changed the start id for idr allocation to "1" and the buffer id "0" is reserved for error validation. Introduced Sanity check to validate the descriptor, before processing the SKB. Crash Signature : Unable to handle kernel paging request at virtual address 3f004900 PC points to "b15_dma_inv_range+0x30/0x50" LR points to "dma_cache_maint_page+0x8c/0x128". The Backtrace obtained is as follows: [<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128) [<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc) [<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k]) [<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k]) [<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci]) [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8) [<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280) [<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280) [<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4) [<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4) [<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90) [<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403191533.28114-1-quic_nmaran@quicinc.com
| | * | wifi: ath11k: Fix incorrect update of radiotap fieldsPradeep Kumar Chitrapu2023-04-192-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix incorrect update of ppdu stats causing incorrect radiotap fields. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-3-quic_pradeepc@quicinc.com
| | * | wifi: ath11k: fix tx status reporting in encap offload modePradeep Kumar Chitrapu2023-04-193-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ieee80211_tx_status() treats packets in 802.11 frame format and tries to extract sta address from packet header. When tx encap offload is enabled, this becomes invalid operation. Hence, switch to using ieee80211_tx_status_ext() after filling in station address for handling both 802.11 and 802.3 frames. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-2-quic_pradeepc@quicinc.com
| | * | wifi: ath11k: add peer mac information in failure casesHarshitha Prem2023-04-191-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During reo command failure, the peer mac detail for which the reo command was not successful is unknown. Hence, to improve the debuggability, add the peer mac information in the failure cases which would be useful during multi client cases. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-4-quic_hprem@quicinc.com
| | * | wifi: ath11k: Prevent REO cmd failuresHarshitha Prem2023-04-192-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent REO cmd failures causing double free by increasing REO cmd ring size and moving REO status ring mask to IRQ group 3 from group 0 to separate from tx completion ring on IRQ group 0 which may delay reo status processing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-3-quic_hprem@quicinc.com
| | * | wifi: ath11k: fix double free of peer rx_tid during reo cmd failureHarshitha Prem2023-04-191-12/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Peer rx_tid is locally copied thrice during peer_rx_tid_cleanup to send REO_CMD_UPDATE_RX_QUEUE followed by REO_CMD_FLUSH_CACHE to flush all aged REO descriptors from HW cache. When sending REO_CMD_FLUSH_CACHE fails, we do dma unmap of already mapped rx_tid->vaddr and free it. This is not checked during reo_cmd_list_cleanup() and dp_reo_cmd_free() before trying to free and unmap again. Fix this by setting rx_tid->vaddr NULL in rx tid delete and also wherever freeing it to check in reo_cmd_list_cleanup() and reo_cmd_free() before trying to free again. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-2-quic_hprem@quicinc.com
| | * | wifi: ath9k: fix per-packet TX-power cap for TPCJonas Jelonek2023-04-171-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix incorrect usage of plain rate_idx as index into the max (power) per rate lookup table. For transmit power control (TPC), the ath9k driver maintains internal tables (in struct ath_hw) to store the max allowed power level per rate. They are used to limit a given TX-power according to regulatory and user limits in the TX-path per packet. The tables are filled in a predefined order, starting with values for CCK + OFDM rates and followed by the values for MCS rates. Thus, the maximum power levels for MCS do not start at index 0 in the table but are shifted by a fixed value. The TX-power limiting in ath_get_rate_txpower currently does not apply this shift, thus retrieves the incorrect maximum power level for a given rate. In particular for MCS rates, the maximum power levels for CCK/OFDM rates were used, e.g. maximum power for OFDM 0 was used for MCS 0. If STBC is used, the power is mostly limited to 0 because the STBC table is zeroed for legacy CCK/OFDM rates. Encountered this during testing of our work-in-progress TPC per packet for ath9k. This only has an effect when TPC is enabled in ath9k (tpc_enabled in struct ath_hw) which defaults to false. In this case it has a significant impact on the used TX-power, throughput + RSSI. Otherwise the affected code is just skipped and TX-power is limited with the hardware registers only. This patch fixes this table lookup. Tested on OpenWrt (kernel 5.15.98, but backported ath9k driver) with small desk setup using ath9k chips AR9280 and AR9580. Cap of TX-power is working properly for all rates now, throughput and RSSI as expected, equal to as if TPC was disabled. Compile-tested with latest 6.3 kernel + allyesconfig. Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230330132159.758088-1-jelonek.jonas@gmail.com
| | * | wifi: ath11k: fix undefined behavior with __fls in dpHarshitha Prem2023-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "__fls" would have an undefined behavior if the argument is passed as "0". Hence, added changes to handle the same. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403184155.8670-3-quic_nmaran@quicinc.com
| | * | wifi: ath11k: Ignore frags from uninitialized peer in dp.Harshitha Prem2023-04-173-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When max virtual ap interfaces are configured in all the bands with ACS and hostapd restart is done every 60s, a crash is observed at random times. In this certain scenario, a fragmented packet is received for self peer, for which rx_tid and rx_frags are not initialized in datapath. While handling this fragment, crash is observed as the rx_frag list is uninitialised and when we walk in ath11k_dp_rx_h_sort_frags, skb null leads to exception. To address this, before processing received fragments we check dp_setup_done flag is set to ensure that peer has completed its dp peer setup for fragment queue, else ignore processing the fragments. Call trace: ath11k_dp_process_rx_err+0x550/0x1084 [ath11k] ath11k_dp_service_srng+0x70/0x370 [ath11k] 0xffffffc009693a04 __napi_poll+0x30/0xa4 net_rx_action+0x118/0x270 __do_softirq+0x10c/0x244 irq_exit+0x64/0xb4 __handle_domain_irq+0x88/0xac gic_handle_irq+0x74/0xbc el1_irq+0xf0/0x1c0 arch_cpu_idle+0x10/0x18 do_idle+0x104/0x248 cpu_startup_entry+0x20/0x64 rest_init+0xd0/0xdc arch_call_rest_init+0xc/0x14 start_kernel+0x480/0x4b8 Code: f9400281 f94066a2 91405021 b94a0023 (f9406401) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403184155.8670-2-quic_nmaran@quicinc.com
| | * | wifi: ath11k: print a warning when crypto_alloc_shash() failsKalle Valo2023-04-171-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Christoph reported that ath11k failed to initialise when michael_mic.ko module was not installed. To make it easier to notice that case print a warning when crypto_alloc_shash() fails. Compile tested only. Reported-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/all/20221130133016.GC3055@lst.de/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405090425.1351-1-kvalo@kernel.org
| | * | wifi: ath11k: pci: Add more MODULE_FIRMWARE() entriesTakashi Iwai2023-04-171-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As there are a few more models supported by the driver, let's add the missing MODULE_FIRMWARE() entries for them. The lack of them resulted in the missing device enablement on some systems, such as the installation image of openSUSE. While we are at it, use the wildcard instead of listing each firmware files individually for each. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230330143718.19511-1-tiwai@suse.de
| | * | wifi: ath11k: enable SAR support on WCN6750Youghandhar Chintala2023-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, SAR is enabled only on WCN6855, enable this for WCN6750 too. This functionality gets triggered, when the user space application calls NL80211_CMD_SET_SAR_SPECS. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230328113455.11252-1-quic_youghand@quicinc.com
| | * | wifi: ath11k: Disable Spectral scan upon removing interfaceTamizh Chelvam Raja2023-04-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Host might receive spectral events during interface down sequence and this might create below errors. failed to handle dma buf release event -22 failed to handle dma buf release event -22 Fix this by disabling spectral config during remove interface. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230328071150.29645-1-quic_tamizhr@quicinc.com
| | * | wifi: ath12k: Remove redundant pci_clear_masterCai Huoqing2023-04-121-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-3-cai.huoqing@linux.dev
| | * | wifi: ath10k: Remove redundant pci_clear_masterCai Huoqing2023-04-121-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-2-cai.huoqing@linux.dev
| | * | wifi: ath11k: Remove redundant pci_clear_masterCai Huoqing2023-04-121-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-1-cai.huoqing@linux.dev
| | * | wifi: ath11k: Send 11d scan start before WMI_START_SCAN_CMDIDManikanta Pubbisetty2023-04-122-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Firmwares advertising the support of triggering 11d algorithm on the scan results of a regular scan expects driver to send WMI_11D_SCAN_START_CMDID before sending WMI_START_SCAN_CMDID. Triggering 11d algorithm on the scan results of a normal scan helps in completely avoiding a separate 11d scan for determining regdomain. This indirectly helps in speeding up connections on station interfaces on the chipsets supporting 11D scan. To enable this feature, send WMI_11D_SCAN_START_CMDID just before sending WMI_START_SCAN_CMDID if the firmware advertises WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN service flag. WCN6750 & WCN6855 supports this feature. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230315161817.29627-1-quic_mpubbise@quicinc.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 00:02:21 +0000