| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Using FIELD_GET() fails in configurations that don't already include
the header file indirectly:
drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe':
drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
| ^~~~~~~~~
Fixes: 89108cb5c285 ("net: pse-pd: tps23881: Fix the device ID check")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
PPS was not stopped in `fec_ptp_stop()`, called when
the adapter was removed. Consequentially, you couldn't
safely reload the driver with the PPS signal on.
Fixes: 32cba57ba74b ("net: fec: introduce fec_ptp_stop and use in probe fail path")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79f
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806175659.3232204-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS
register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1)
rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this.
Fixes: 70523e639bf8c ("drivers: net: stmmac: reworking the PCS code.")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The second tagged commit started sometimes (very rarely, but possible)
throwing WARNs from
net/core/page_pool.c:page_pool_disable_direct_recycling().
Turned out idpf frees interrupt vectors with embedded NAPIs *before*
freeing the queues making page_pools' NAPI pointers lead to freed
memory before these pools are destroyed by libeth.
It's not clear whether there are other accesses to the freed vectors
when destroying the queues, but anyway, we usually free queue/interrupt
vectors only when the queues are destroyed and the NAPIs are guaranteed
to not be referenced anywhere.
Invert the allocation and freeing logic making queue/interrupt vectors
be allocated first and freed last. Vectors don't require queues to be
present, so this is safe. Additionally, this change allows to remove
that useless queue->q_vector pointer cleanup, as vectors are still
valid when freeing the queues (+ both are freed within one function,
so it's not clear why nullify the pointers at all).
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues")
Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The initialization of vport interrupt consists of two functions:
1) idpf_vport_intr_init() where a generic configuration is done
2) idpf_vport_intr_req_irq() where the irq for each q_vector is
requested.
The first function used to create a base name for each interrupt using
"kasprintf()" call. Unfortunately, although that call allocated memory
for a text buffer, that memory was never released.
Fix this by removing creating the interrupt base name in 1).
Instead, always create a full interrupt name in the function 2), because
there is no need to create a base name separately, considering that the
function 2) is never called out of idpf_vport_intr_init() context.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Cc: stable@vger.kernel.org # 6.7
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The second tagged commit introduced a UAF, as it removed restoring
q_vector->vport pointers after reinitializating the structures.
This is due to that all queue allocation functions are performed here
with the new temporary vport structure and those functions rewrite
the backpointers to the vport. Then, this new struct is freed and
the pointers start leading to nowhere.
But generally speaking, the current logic is very fragile. It claims
to be more reliable when the system is low on memory, but in fact, it
consumes two times more memory as at the moment of running this
function, there are two vports allocated with their queues and vectors.
Moreover, it claims to prevent the driver from running into "bad state",
but in fact, any error during the rebuild leaves the old vport in the
partially allocated state.
Finally, if the interface is down when the function is called, it always
allocates a new queue set, but when the user decides to enable the
interface later on, vport_open() allocates them once again, IOW there's
a clear memory leak here.
Just don't allocate a new queue set when performing a reset, that solves
crashes and memory leaks. Readd the old queue number and reopen the
interface on rollback - that solves limbo states when the device is left
disabled and/or without HW queues enabled.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Fixes: e4891e4687c8 ("idpf: split &idpf_queue into 4 strictly-typed queue structures")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
A recent commit has modified the code in __bnxt_reserve_rings() to
set the default RSS indirection table to default only when the number
of RX rings is changing. While this works for newer firmware that
requires RX ring reservations, it causes the regression on older
firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns
false).
With older firmware, RX ring reservations are not required and so
hw_resc->resv_rx_rings is not always set to the proper value. The
comparison:
if (old_rx_rings != bp->hw_resc.resv_rx_rings)
in __bnxt_reserve_rings() may be false even when the RX rings are
changing. This will cause __bnxt_reserve_rings() to skip setting
the default RSS indirection table to default to match the current
number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to
use an out-of-range index.
We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this
scenario. We just need to move it up in bnxt_need_reserve_rings()
to be called unconditionally when using older firmware. Without the
fix, if the TX rings are changing, we'll skip the
bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also
skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained
in the last paragraph. Without setting the default RSS indirection
table to default, it causes the regression:
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/ZrC6jpghA3PWVWSB@gmail.com/
Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240806053742.140304-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.
This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount.
Fixes: 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev= 4.14
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=6f345e48
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The wol variable in ksz_port_set_mac_address() is declared with random
data, but the code in ksz_get_wol call may not be executed so the
WAKE_MAGIC check may be invalid resulting in an error message when
setting a MAC address after starting the DSA driver.
Fixes: 3b454b6390c3 ("net: dsa: microchip: ksz9477: Add Wake on Magic Packet support")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240805235200.24982-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Free the unused skb when not ip packets arrive.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Don't break the resize action if the vq coalescing feature
named VIRTIO_NET_F_VQ_NOTF_COAL is not negotiated.
Fixes: f61fe5f081cf ("virtio-net: fix the vq coalescing setting for vq resize")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Eugenio Pé rez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Virtio spec says:
The driver MUST have negotiated the VIRTIO_NET_F_VQ_NOTF_COAL
feature when issuing commands VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET
and VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET.
So we add the feature negotiation check to
virtnet_send_{r,t}x_ctrl_coal_vq_cmd as a basis for the next bugfix patch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
GVE driver wrongly relies on netif_carrier_ok() to check the
interface administrative state when resources are being
allocated/deallocated for queue(s). netif_carrier_ok() needs
to be replaced with netif_running() for all such cases.
Administrative state is the result of "ip link set dev <dev>
up/down". It reflects whether the administrator wants to use
the device for traffic and the corresponding resources have
been allocated.
Fixes: 5f08cd3d6423 ("gve: Alloc before freeing when adjusting queues")
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240801205619.987396-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
| |
The DEVID register contains two pieces of information: the device ID in
the upper nibble, and the silicon revision number in the lower nibble.
The driver should work fine with any silicon revision, so let's mask
that out in the device ID check.
Fixes: 20e6d190ffe1 ("net: pse-pd: Add TI TPS23881 PSE controller driver")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240731154152.4020668-1-kyle.swenson@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, bleutooth, BPF and netfilter.
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq"
* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
mptcp: fix duplicate data handling
mptcp: fix bad RCVPRUNED mib accounting
ipv6: fix ndisc_is_useropt() handling for PIO
igc: Fix double reset adapter triggered from a single taprio cmd
net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
net: wan: fsl_qmc_hdlc: Discard received CRC
net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
net/mlx5e: Fix CT entry update leaks of modify header context
net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
net/mlx5: Fix missing lock on sync reset reload
net/mlx5: Lag, don't use the hardcoded value of the first port
net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
net/mlx5: Fix error handling in irq_pool_request_irq
net/mlx5: Always drain health in shutdown callback
net: Add skbuff.h to MAINTAINERS
r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
net: drop bad gso csum_start and offset in virtio_net_hdr
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Received frame from QMC contains the CRC.
Upper layers don't need this CRC and tcpdump mentioned trailing junk
data due to this CRC presence.
As some other HDLC driver, simply discard this CRC.
Fixes: d0f2258e79fd ("net: wan: Add support for QMC HDLC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063133.179598-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.
A run with PROVE_LOCKING enabled detected the issue:
[ BUG: Invalid wait context ]
...
c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
other info that might help us debug this:
context-{4:4}
2 locks held by ifconfig/146:
#0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
#1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98
Avoid the spinlock usage and convert carrier_lock to a mutex.
Fixes: 54762918ca85 ("net: wan: fsl_qmc_hdlc: Add framer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.
Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.
Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.
Fixes: 94ceffb48eac ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.
Fixes: fa5aa2f89073 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
On sync reset reload work, when remote host updates devlink on reload
actions performed on that host, it misses taking devlink lock before
calling devlink_remote_reload_actions_performed() which results in
triggering lock assert like the following:
WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50
…
CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S W 6.10.0-rc2+ #116
Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015
Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core]
RIP: 0010:devl_assert_locked+0x3e/0x50
…
Call Trace:
<TASK>
? __warn+0xa4/0x210
? devl_assert_locked+0x3e/0x50
? report_bug+0x160/0x280
? handle_bug+0x3f/0x80
? exc_invalid_op+0x17/0x40
? asm_exc_invalid_op+0x1a/0x20
? devl_assert_locked+0x3e/0x50
devlink_notify+0x88/0x2b0
? mlx5_attach_device+0x20c/0x230 [mlx5_core]
? __pfx_devlink_notify+0x10/0x10
? process_one_work+0x4b6/0xbb0
process_one_work+0x4b6/0xbb0
[…]
Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The cited commit didn't change the body of the loop as it should.
It shouldn't be using MLX5_LAG_P1.
Fixes: 7e978e7714d6 ("net/mlx5: Lag, use actual number of lag ports")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch reduces the size of hw_ste_arr_optimized array that is
allocated on stack from 640 bytes (5 match STEs + 5 action STES)
to 448 bytes (2 match STEs + 5 action STES).
This fixes the 'stack guard page was hit' issue, while still fitting
majority of the usecases (up to 2 match STEs).
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In case mlx5_irq_alloc fails, the previously allocated index remains
in the XArray, which could lead to inconsistencies.
Fix it by adding error handling that erases the allocated index
from the XArray if mlx5_irq_alloc returns an error.
Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
There is no point in recovery during device shutdown. if health
work started need to wait for it to avoid races and NULL pointer
access.
Hence, drain health WQ on shutdown callback.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Fixes: d2aa060d40fa ("net/mlx5: Cancel health poll before sending panic teardown command")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't
increment the tx_dropped counter.
Fixes: 188f4af04618 ("r8169: use NETDEV_TX_{BUSY/OK}")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/bbba9c48-8bac-4932-9aa1-d2ed63bc9433@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: fix AF_XDP ZC timeout and concurrency issues
Maciej Fijalkowski says:
Changes included in this patchset address an issue that customer has
been facing when AF_XDP ZC Tx sockets were used in combination with flow
control and regular Tx traffic.
After executing:
ethtool --set-priv-flags $dev link-down-on-close on
ethtool -A $dev rx on tx on
launching multiple ZC Tx sockets on $dev + pinging remote interface (so
that regular Tx traffic is present) and then going through down/up of
$dev, Tx timeout occurred and then most of the time ice driver was unable
to recover from that state.
These patches combined together solve the described above issue on
customer side. Main focus here is to forbid producing Tx descriptors when
either carrier is not yet initialized or process of bringing interface
down has already started.
v1: https://lore.kernel.org/netdev/20240708221416.625850-1-anthony.l.nguyen@intel.com/
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: fix txq interrupt mapping
ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_prog
ice: improve updating ice_{t,r}x_ring::xsk_pool
ice: toggle netif_carrier when setting up XSK pool
ice: modify error handling when setting XSK pool in ndo_bpf
ice: replace synchronize_rcu with synchronize_net
ice: don't busy wait for Rx queue disable in ice_qp_dis()
ice: respect netif readiness in AF_XDP ZC related ndo's
====================
Link: https://patch.msgid.link/20240729200716.681496-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
ice_cfg_txq_interrupt() internally handles XDP Tx ring. Do not use
ice_for_each_tx_ring() in ice_qvec_cfg_msix() as this causing us to
treat XDP ring that belongs to queue vector as Tx ring and therefore
misconfiguring the interrupts.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
It is read by data path and modified from process context on remote cpu
so it is needed to use WRITE_ONCE to clear the pointer.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
xsk_buff_pool pointers that ice ring structs hold are updated via
ndo_bpf that is executed in process context while it can be read by
remote CPU at the same time within NAPI poll. Use synchronize_net()
after pointer update and {READ,WRITE}_ONCE() when working with mentioned
pointer.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This so we prevent Tx timeout issues. One of conditions checked on
running in the background dev_watchdog() is netif_carrier_ok(), so let
us turn it off when we disable the queues that belong to a q_vector
where XSK pool is being configured. Turn carrier on in ice_qp_ena()
only when ice_get_link_status() tells us that physical link is up.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Don't bail out right when spotting an error within ice_qp_{dis,ena}()
but rather track error and go through whole flow of disabling and
enabling queue pair.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.
Additionally, turn off regular Tx queue before disabling irqs and NAPI.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b033f ("ice: Add support to
enable/disable all Rx queues before waiting").
To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.
Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.
Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.
Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit 708405f3e56e ("net: phy: aquantia: wait for the GLOBAL_CFG to
start returning real values") introduced a workaround for an issue
observed on aqr115c. However there were never any reports of it
happening on other models and the workaround has been reported to cause
and issue on aqr113c (and it may cause the same on any other model not
supporting 10M mode).
Let's limit the impact of the workaround to aqr113, aqr113c and aqr115c
and poll the 100M GLOBAL_CFG register instead as both models are known
to support it correctly.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/lkml/7c0140be-4325-4005-9068-7e0fc5ff344d@nvidia.com/
Fixes: 708405f3e56e ("net: phy: aquantia: wait for the GLOBAL_CFG to start returning real values")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20240729150315.65798-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The MDIX status is not accurately reflecting the current state after the link
partner has manually altered its MDIX configuration while operating in forced
mode.
Access information about Auto mdix completion and pair selection from the
KSZ9131's Auto/MDI/MDI-X status register
Fixes: b64e6a8794d9 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This function has a nested loop. The problem is that both the inside
and outside loop use the same variable as an iterator. I found this
via static analysis so I'm not sure the impact. It could be that it
loops forever or, more likely, the loop exits early.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/eaa8f403-7779-4d81-973d-a9ecddc0bf6f@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
softirq may get lost if an Rx interrupt comes before we call
napi_enable. Move napi_enable in front of axienet_setoptions(), which
turns on the device, to address the issue.
Link: https://lists.gnu.org/archive/html/qemu-devel/2024-07/msg06160.html
Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
As described in the kdoc for .create_rxfh_context we are responsible
for populating the defaults. The core will not call .get_rxfh
for non-0 context.
The problem can be easily observed since Netlink doesn't currently
use the cache. Using netlink ethtool:
$ ethtool -x eth0 context 1
[...]
RSS hash key:
13:60:cd:60:14:d3:55:36:86:df:90:f2:96:14:e2:21:05:57:a8:8f:a5:12:5e:54:62:7f:fd:3c:15:7e:76:05:71:42:a2:9a:73:80:09:9c
RSS hash function:
toeplitz: on
xor: off
crc32: off
But using IOCTL ethtool shows:
$ ./ethtool-old -x eth0 context 1
[...]
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
RSS hash function:
Operation not supported
Fixes: 7964e7884643 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In commit under Fixes I split the bnxt_set_rxfh_context() function,
and attached the appropriate chunks to new ops. I missed that
bnxt_set_rxfh_context() gets called after some initial checks
in bnxt_set_rxfh(), namely that the hash function is Toeplitz.
Fixes: 5c466b4d4e75 ("eth: bnxt: move from .set_rxfh to .create_rxfh_context and friends")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In testing the recent kernel I found that the fbnic driver couldn't be
enabled on x86_64 builds. A bit of digging showed that the fbnic driver was
the only one to check for S390 to be n, all others had checked for !S390.
Since it is a boolean and not a tristate I am not sure it will be N. So
just update it to use the !S390 flag.
A quick check via "make menuconfig" verified that after making this change
there was an option to select the fbnic driver.
Fixes 0e03c643dc93 ("eth: fbnic: fix s390 build.")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/172192698293.1903337.4255690118685300353.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of more urgent fixes:
* ath12k: wowlan loop iteration issue
* ath12k: fix soft lockup on suspend in certain scenarios
* mt76: fix crash when removing an interface
* mac80211: fix injection crash with some drivers that
don't want monitor vif
* cfg80211: fix S1G beacon parsing in scan
* cfg80211: fix MLO link status reporting on connect
* tag 'wireless-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath12k: fix soft lockup on suspend
wifi: mt76: mt7921: fix null pointer access in mt792x_mac_link_bss_remove
wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups()
wifi: cfg80211: correct S1G beacon length calculation
wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done
wifi: mac80211: use monitor sdata with driver only if desired
====================
Link: https://patch.msgid.link/20240726122638.942420-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The ext interrupts are enabled when the firmware has been started, but
this may never happen, for example, if the board configuration file is
missing.
When the system is later suspended, the driver unconditionally tries to
disable interrupts, which results in an irq disable imbalance and causes
the driver to spin indefinitely in napi_synchronize().
Make sure that the interrupts have been enabled before attempting to
disable them.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix null pointer access in mt792x_mac_link_bss_remove.
To prevent null pointer access, we should assign the vif to bss_conf in
mt7921_add_interface. This ensures that subsequent operations on the BSS
can properly reference the correct vif.
[ T843] Call Trace:
[ T843] <TASK>
[ T843] ? __die+0x1e/0x60
[ T843] ? page_fault_oops+0x157/0x450
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? search_bpf_extables+0x5a/0x80
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? exc_page_fault+0x2bb/0x670
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? lock_timer_base+0x71/0x90
[ T843] ? asm_exc_page_fault+0x26/0x30
[ T843] ? mt792x_mac_link_bss_remove+0x24/0x110 [mt792x_lib]
[ T843] ? mt792x_remove_interface+0x6e/0x90 [mt792x_lib]
[ T843] ? ieee80211_do_stop+0x507/0x7e0 [mac80211]
[ T843] ? ieee80211_stop+0x53/0x190 [mac80211]
[ T843] ? __dev_close_many+0xa5/0x120
[ T843] ? __dev_change_flags+0x18c/0x220
[ T843] ? dev_change_flags+0x21/0x60
[ T843] ? do_setlink+0xdf9/0x11d0
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? security_sock_rcv_skb+0x33/0x50
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? __nla_validate_parse+0x61/0xd10
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? genl_done+0x53/0x80
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? netlink_dump+0x357/0x410
[ T843] ? __rtnl_newlink+0x5d6/0x980
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? genl_family_rcv_msg_dumpit+0xdf/0xf0
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? __kmalloc_cache_noprof+0x44/0x210
[ T843] ? rtnl_newlink+0x42/0x60
[ T843] ? rtnetlink_rcv_msg+0x152/0x3f0
[ T843] ? mptcp_pm_nl_dump_addr+0x180/0x180
[ T843] ? rtnl_calcit.isra.0+0x130/0x130
[ T843] ? netlink_rcv_skb+0x56/0x100
[ T843] ? netlink_unicast+0x199/0x290
[ T843] ? netlink_sendmsg+0x21d/0x490
[ T843] ? __sock_sendmsg+0x78/0x80
[ T843] ? ____sys_sendmsg+0x23f/0x2e0
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? copy_msghdr_from_user+0x68/0xa0
[ T843] ? ___sys_sendmsg+0x81/0xd0
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? crng_fast_key_erasure+0xbc/0xf0
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? get_random_bytes_user+0x126/0x140
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? __fdget+0xb1/0xe0
[ T843] ? __sys_sendmsg+0x56/0xa0
[ T843] ? srso_alias_return_thunk+0x5/0xfbef5
[ T843] ? do_syscall_64+0x5f/0x170
[ T843] ? entry_SYSCALL_64_after_hwframe+0x55/0x5d
[ T843] </TASK>
Fixes: 1541d63c5fe2 ("wifi: mt76: mt7925: add mt7925_mac_link_bss_remove to remove per-link BSS")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/linux-wireless/2fee61f8c903d02a900ca3188c3742c7effd102e.camel@web.de/#b
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Bert Karwatzki <spasswolf@web.de>
Link: https://patch.msgid.link/20240718234633.12737-1-sean.wang@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Smatch throws below warning:
drivers/net/wireless/ath/ath12k/wow.c:434 ath12k_wow_vif_set_wakeups()
warn: reusing outside iterator: 'i'
drivers/net/wireless/ath/ath12k/wow.c
411 default:
412 break;
413 }
414
415 for (i = 0; i < wowlan->n_patterns; i++) {
^^^^^^^^^^^^^^^^^^^^^^
Here we loop until ->n_patterns
416 const struct cfg80211_pkt_pattern *eth_pattern = &patterns[i];
417 struct ath12k_pkt_pattern new_pattern = {};
418
419 if (WARN_ON(eth_pattern->pattern_len > WOW_MAX_PATTERN_SIZE))
420 return -EINVAL;
421
422 if (ar->ab->wow.wmi_conf_rx_decap_mode ==
423 ATH12K_HW_TXRX_NATIVE_WIFI) {
424 ath12k_wow_convert_8023_to_80211(ar, eth_pattern,
425 &new_pattern);
426
427 if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE))
428 return -EINVAL;
429 } else {
430 memcpy(new_pattern.pattern, eth_pattern->pattern,
431 eth_pattern->pattern_len);
432
433 /* convert bitmask to bytemask */
--> 434 for (i = 0; i < eth_pattern->pattern_len; i++)
435 if (eth_pattern->mask[i / 8] & BIT(i % 8))
436 new_pattern.bytemask[i] = 0xff;
This loop re-uses i and the loop ends with i == eth_pattern->pattern_len.
This looks like a bug.
Change to use a new iterator 'j' for the inner loop to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/d4975b95-9c43-45af-a0ab-80253f18c7f2@stanley.mountain/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240722033332.6273-1-quic_bqiang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885be36 ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.
Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.
Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Reported-by: Russell Senior <russell@personaltelco.net>
Closes: https://github.com/openwrt/openwrt/issues/15981
Link: https://github.com/openwrt/openwrt/issues/15739
Signed-off-by: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|