summaryrefslogtreecommitdiffstats
path: root/drivers/nvme/host/pci.c
Commit message (Collapse)AuthorAgeFilesLines
* nvme-pci: Use PCI bus address for data/queues in CMBChristoph Hellwig2017-10-121-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | commit 8969f1f8291762c13147c1ba89d46238af01675b upstream. Currently, NVMe PCI host driver is programming CMB dma address as I/O SQs addresses. This results in failures on systems where 1:1 outbound mapping is not used (example Broadcom iProc SOCs) because CMB BAR will be progammed with PCI bus address but NVMe PCI EP will try to access CMB using dma address. To have CMB working on systems without 1:1 outbound mapping, we program PCI bus address for I/O SQs instead of dma address. This approach will work on systems with/without 1:1 outbound mapping. Based on a report and previous patch from Abhishek Shah. Fixes: 8ffaadf7 ("NVMe: Use CMB for the IO SQes if available") Reported-by: Abhishek Shah <abhishek.shah@broadcom.com> Tested-by: Abhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvme: unmap CMB and remove sysfs file in reset pathJon Derrick2017-05-251-1/+6
| | | | | | | | | | | | | | | | | | commit f63572dff1421b6ca6abce71d46e03411e605c94 upstream. CMB doesn't get unmapped until removal while getting remapped on every reset. Add the unmapping and sysfs file removal to the reset path in nvme_pci_disable to match the mapping path in nvme_pci_enable. Fixes: 202021c1a ("nvme : Add sysfs entry for NVMe CMBs when appropriate") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Acked-by: Keith Busch <keith.busch@intel.com> Reviewed-By: Stephen Bates <sbates@raithlin.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvme/pci: Disable on removal when disconnectedKeith Busch2017-04-081-1/+3
| | | | | | | | | | | | | | | | | commit 6db28eda266052f86a6b402422de61eeb7d2e351 upstream. If the device is not present, the driver should disable the queues immediately. Prior to this, the driver was relying on the watchdog timer to kill the queues if requests were outstanding to the device, and that just delays removal up to one second. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvme/pci: Don't free queues on errorKeith Busch2016-11-161-14/+4
| | | | | | | | | | | | | | | The nvme_remove function tears down all allocated resources in the correct order, so no need to free queues on error during initialization. This fixes possible use-after-free errors when queues are still associated with a blk-mq hctx. Reported-by: Scott Bauer <scott.bauer@intel.com> Tested-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2016-10-211-23/+54
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: "A set of fixes that missed the merge window, mostly due to me being away around that time. Nothing major here, a mix of nvme cleanups and fixes, and one fix for the badblocks handling" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: use symbolic constants for CNS values nvme: use symbolic constants for CNS values nvme.h: add an enum for cns values nvme.h: don't use uuid_be nvme.h: resync with nvme-cli nvme: Add tertiary number to NVME_VS nvme : Add sysfs entry for NVMe CMBs when appropriate nvme: don't schedule multiple resets nvme: Delete created IO queues on reset nvme: Stop probing a removed device badblocks: fix overlapping check for clearing
| * nvme: Add tertiary number to NVME_VSGabriel Krisman Bertazi2016-10-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | NVMe 1.2.1 specification adds a tertiary element to the version number. This updates the macro and its callers to include the final number and fixup a single place in nvmet where the version was generated manually. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme : Add sysfs entry for NVMe CMBs when appropriateStephen Bates2016-10-121-9/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a sysfs attribute that contains salient information about the NVMe Controller Memory Buffer when one is present. For now, just display the information about the CMB available from the control registers. We attach the CMB attribute file to the existing nvme_ctrl sysfs group so it can handle the sysfs teardown. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Stephen Bates <sbates@raithlin.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: don't schedule multiple resetsKeith Busch2016-10-121-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The queue_work only fails if the work is pending, but not yet running. If the work is running, the work item would get requeued, triggering a double reset. If the first reset fails for any reason, the second reset triggers: WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING) Hitting that schedules controller deletion for a second time, which potentially takes a reference on the device that is being deleted. If the reset occurs at the same time as a hot removal event, this causes a double-free. This patch has the reset helper function check if the work is busy prior to queueing, and changes all places that schedule resets to use this function. Since most users don't want to sync with that work, the "flush_work" is moved to the only caller that wants to sync. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg<sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: Delete created IO queues on resetKeith Busch2016-10-121-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | The driver was decrementing the online_queues prior to attempting to delete those IO queues, so the driver ended up not requesting the controller delete any. This patch saves the online_queues prior to suspending them, and adds that parameter for deleting io queues. Fixes: c21377f8 ("nvme: Suspend all queues before deletion") Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* | nvme: use the DMA_ATTR_NO_WARN attributeMauricio Faria de Oliveira2016-10-111-1/+2
|/ | | | | | | | | | | | | | | | Use the DMA_ATTR_NO_WARN attribute for the dma_map_sg() call of the nvme driver that returns BLK_MQ_RQ_QUEUE_BUSY (not for BLK_MQ_RQ_QUEUE_ERROR). Link: http://lkml.kernel.org/r/1470092390-25451-4-git-send-email-mauricfo@linux.vnet.ibm.com Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Jens Axboe <axboe@fb.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-4.9/block-irq' of git://git.kernel.dk/linux-blockLinus Torvalds2016-10-091-73/+36
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull blk-mq irq/cpu mapping updates from Jens Axboe: "This is the block-irq topic branch for 4.9-rc. It's mostly from Christoph, and it allows drivers to specify their own mappings, and more importantly, to share the blk-mq mappings with the IRQ affinity mappings. It's a good step towards making this work better out of the box" * 'for-4.9/block-irq' of git://git.kernel.dk/linux-block: blk_mq: linux/blk-mq.h does not include all the headers it depends on blk-mq: kill unused blk_mq_create_mq_map() blk-mq: get rid of the cpumask in struct blk_mq_tags nvme: remove the post_scan callout nvme: switch to use pci_alloc_irq_vectors blk-mq: provide a default queue mapping for PCI device blk-mq: allow the driver to pass in a queue mapping blk-mq: remove ->map_queue blk-mq: only allocate a single mq_map per tag_set blk-mq: don't redistribute hardware queues on a CPU hotplug event
| * nvme: switch to use pci_alloc_irq_vectorsChristoph Hellwig2016-09-151-71/+36
| | | | | | | | | | | | | | | | | | Use the new helper to automatically select the right interrupt type, as well as to use the automatic interupt affinity assignment. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * blk-mq: remove ->map_queueChristoph Hellwig2016-09-151-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | All drivers use the default, so provide an inline version of it. If we ever need other queue mapping we can add an optional method back, although supporting will also require major changes to the queue setup code. This provides better code generation, and better debugability as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | nvme/quirk: Add a delay before checking device ready for memblaze deviceWenbo Wang2016-09-081-0/+2
| | | | | | | | | | Signed-off-by: Wenbo Wang <wenbo.wang@memblaze.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | nvme: Don't suspend admin queue that wasn't createdGabriel Krisman Bertazi2016-09-071-1/+6
|/ | | | | | | | | | | | | | | | This fixes a regression in my previous commit c21377f8366c ("nvme: Suspend all queues before deletion"), which provoked an Oops in the removal path when removing a device that became IO incapable very early at probe (i.e. after a failed EEH recovery). Turns out, if the error occurred very early at the probe path, before even configuring the admin queue, we might try to suspend the uninitialized admin queue, accessing bad memory. Fixes: c21377f8366c ("nvme: Suspend all queues before deletion") Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* nvme: Suspend all queues before deletionGabriel Krisman Bertazi2016-08-111-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When nvme_delete_queue fails in the first pass of the nvme_disable_io_queues() loop, we return early, failing to suspend all of the IO queues. Later, on the nvme_pci_disable path, this causes us to disable MSI without actually having freed all the IRQs, which triggers the BUG_ON in free_msi_irqs(), as show below. This patch refactors nvme_disable_io_queues to suspend all queues before start submitting delete queue commands. This way, we ensure that we have at least returned every IRQ before continuing with the removal path. [ 487.529200] kernel BUG at ../drivers/pci/msi.c:368! cpu 0x46: Vector: 700 (Program Check) at [c0000078c5b83650] pc: c000000000627a50: free_msi_irqs+0x90/0x200 lr: c000000000627a40: free_msi_irqs+0x80/0x200 sp: c0000078c5b838d0 msr: 9000000100029033 current = 0xc0000078c5b40000 paca = 0xc000000002bd7600 softe: 0 irq_happened: 0x01 pid = 1376, comm = kworker/70:1H kernel BUG at ../drivers/pci/msi.c:368! Linux version 4.7.0.mainline+ (root@iod76) (gcc version 5.3.1 20160413 (Ubuntu/IBM 5.3.1-14ubuntu2.1) ) #104 SMP Fri Jul 29 09:20:17 CDT 2016 enter ? for help [c0000078c5b83920] d0000000363b0cd8 nvme_dev_disable+0x208/0x4f0 [nvme] [c0000078c5b83a10] d0000000363b12a4 nvme_timeout+0xe4/0x250 [nvme] [c0000078c5b83ad0] c0000000005690e4 blk_mq_rq_timed_out+0x64/0x110 [c0000078c5b83b40] c00000000056c930 bt_for_each+0x160/0x170 [c0000078c5b83bb0] c00000000056d928 blk_mq_queue_tag_busy_iter+0x78/0x110 [c0000078c5b83c00] c0000000005675d8 blk_mq_timeout_work+0xd8/0x1b0 [c0000078c5b83c50] c0000000000e8cf0 process_one_work+0x1e0/0x590 [c0000078c5b83ce0] c0000000000e9148 worker_thread+0xa8/0x660 [c0000078c5b83d80] c0000000000f2090 kthread+0x110/0x130 [c0000078c5b83e30] c0000000000095f0 ret_from_kernel_thread+0x5c/0x6c Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: linux-nvme@lists.infradead.org Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds2016-08-021-12/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
| * NVMe: Use pci_(request|release)_mem_regionsJohannes Thumshirn2016-06-211-7/+3
| | | | | | | | | | | | | | | | | | | | | | Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the NVMe driver. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Keith Busch <keith.busch@intel.com> CC: Jens Axboe <axboe@fb.com>
* | Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2016-07-261-32/+36
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block driver updates from Jens Axboe: "This branch also contains core changes. I've come to the conclusion that from 4.9 and forward, I'll be doing just a single branch. We often have dependencies between core and drivers, and it's hard to always split them up appropriately without pulling core into drivers when that happens. That said, this contains: - separate secure erase type for the core block layer, from Christoph. - set of discard fixes, from Christoph. - bio shrinking fixes from Christoph, as a followup up to the op/flags change in the core branch. - map and append request fixes from Christoph. - NVMeF (NVMe over Fabrics) code from Christoph. This is pretty exciting! - nvme-loop fixes from Arnd. - removal of ->driverfs_dev from Dan, after providing a device_add_disk() helper. - bcache fixes from Bhaktipriya and Yijing. - cdrom subchannel read fix from Vchannaiah. - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier. - set of drbd updates and fixes from Fabian, Lars, and Philipp. - mg_disk error path fix from Bart. - user notification for failed device add for loop, from Minfei. - NVMe in general: + NVMe delay quirk from Guilherme. + SR-IOV support and command retry limits from Keith. + fix for memory-less NUMA node from Masayoshi. + use UINT_MAX for discard sectors, from Minfei. + cancel IO fixes from Ming. + don't allocate unused major, from Neil. + error code fixup from Dan. + use constants for PSDT/FUSE from James. + variable init fix from Jay. + fabrics fixes from Ming, Sagi, and Wei. + various fixes" * 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits) nvme/pci: Provide SR-IOV support nvme: initialize variable before logical OR'ing it block: unexport various bio mapping helpers scsi/osd: open code blk_make_request target: stop using blk_make_request block: simplify and export blk_rq_append_bio block: ensure bios return from blk_get_request are properly initialized virtio_blk: use blk_rq_map_kern memstick: don't allow REQ_TYPE_BLOCK_PC requests block: shrink bio size again block: simplify and cleanup bvec pool handling block: get rid of bio_rw and READA block: don't ignore -EOPNOTSUPP blkdev_issue_write_same block: introduce BLKDEV_DISCARD_ZERO to fix zeroout NVMe: don't allocate unused nvme_major nvme: avoid crashes when node 0 is memoryless node. nvme: Limit command retries loop: Make user notify for adding loop device failed nvme-loop: fix nvme-loop Kconfig dependencies nvmet: fix return value check in nvmet_subsys_alloc() ...
| * | nvme/pci: Provide SR-IOV supportKeith Busch2016-07-201-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | This registers an sr-iov callback for nvme. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme: avoid crashes when node 0 is memoryless node.Masayoshi Mizuma2016-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_NUMA is enabled and node 0 is memoryless, the system crashes because nvme_probe() sets the device->numa_node to 0 by set_dev_node(&pdev->dev, 0), so it tries to allocate memory from node 0. To avoid the crash, we should change the 0 to first_memory_node. Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme: Limit command retriesKeith Busch2016-07-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many controller implementations will return errors to commands that will not succeed, but without the DNR bit set. The driver previously retried these commands an unlimited number of times until the command timeout has exceeded, which takes an unnecessarilly long period of time. This patch limits the number of retries a command can have, defaulting to 5, but is user tunable at load or runtime. The struct request's 'retries' field is used to track the number of retries attempted. This is in contrast with scsi's use of this field, which indicates how many retries are allowed. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme/quirk: Add a delay before checking for adapter readinessGuilherme G. Piccoli2016-07-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When disabling the controller, the specification says the register NVME_REG_CC should be written and then driver needs to wait the adapter to be ready, which is checked by reading another register bit (NVME_CSTS_RDY). There's a timeout validation in this checking, so in case this timeout is reached the driver gives up and removes the adapter from the system. After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003) (HGST adapter) end up being removed if we issue a reset_controller, because driver keeps verifying the NVME_REG_CSTS until the timeout is reached. This patch adds a necessary quirk for this adapter, by introducing a delay before nvme_wait_ready(), so the reset procedure is able to be completed. This quirk is needed because just increasing the timeout is not enough in case of this adapter - the driver must wait before start reading NVME_REG_CSTS register on this specific device. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme.h: add NVMe over Fabrics definitionsChristoph Hellwig2016-07-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NVMe over Fabrics specification defines a protocol interface and related extensions to NVMe that enable operation over network protocols. The NVMe over Fabrics specification has an NVMe Transport binding for each NVMe Transport. This patch adds the fabrics related definitions: - fabric specific command set and error codes - transport addressing and binding definitions - fabrics sgl extensions - controller identification fabrics enhancements - discovery log page definition Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme: add fabrics sysfs attributesMing Lin2016-07-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - delete_controller: This attribute allows to delete a controller. A driver is not obligated to support it (pci doesn't) so it is created only if the driver supports it. The new fabrics drivers will support it (essentialy a disconnect operation). Usage: echo > /sys/class/nvme/nvme0/delete_controller - subsysnqn: This attribute shows the subsystem nqn of the configured device. If a driver does not implement the get_subsysnqn method, the file will not appear in sysfs. - transport: This attribute shows the transport name. Added a "name" field to struct nvme_ctrl_ops. For loop, cat /sys/class/nvme/nvme0/transport loop For RDMA, cat /sys/class/nvme/nvme0/transport rdma For PCIe, cat /sys/class/nvme/nvme0/transport pcie - address: This attributes shows the controller address. The fabrics drivers that will implement get_address can show the address of the connected controller. example: cat /sys/class/nvme/nvme0/address traddr=192.168.2.2,trsvcid=1023 Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme: Modify and export sync command submission for fabricsChristoph Hellwig2016-07-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NVMe over fabrics will use __nvme_submit_sync_cmd in the the transport and require a few tweaks to it. For that we export it and add a few more paramters: 1. allow passing a queue ID to the block layer For the NVMe over Fabrics connect command we need to able to specify a queue ID that we want to send the command on. Add a qid parameter to the relevant functions to enable this behavior. 2. allow submitting at_head commands In cases where we want to (re)connect to a controller where we have inflight queued commands we want to first connect and only then allow the other queued commands to be kicked. This will prevents failures in controller resets and reconnects. 3. allow passing flags to blk_mq_allocate_request Both for Fabrics connect the the keep-alive feature in NVMe 1.2.1 we want to be able to use reserved requests. Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme: move the workaround for I/O queue-less controllers from PCIe to coreChristoph Hellwig2016-06-121-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to apply this to Fabrics drivers as well, so move it to common code. Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme: move nvme_cancel_request() to common codeMing Lin2016-06-071-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So it can be used by fabrics driver also. Signed-off-by: Ming Lin <ming.l@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Keith Busch <keith.bsuch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | nvme: update and rename nvme_cancel_io to nvme_cancel_requestMing Lin2016-06-071-4/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | nvme_cancel_io is a bit confusing (given the distinction of io/admin), so rename it to nvme_cancel_request. And update it a bit to pass in struct nvme_ctrl, so it can be used by Fabrics driver also. Signed-off-by: Ming Lin <ming.l@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Keith Busch <keith.bsuch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* / NVMe: Only release requested regionsJohannes Thumshirn2016-06-091-2/+7
|/ | | | | | | | | The NVMe driver only requests the PCIe device's memory regions but releases all possible regions (including eventual I/O regions). This leads to a stale warning entry in dmesg about freeing non existent resources. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* NVMe: Add device ID's with stripe quirkKeith Busch2016-05-171-0/+6
| | | | | | | Adds two Intel controllers that have the "stripe" quirk. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* NVMe: Short-cut removal on surprise hot-unplugKeith Busch2016-05-171-0/+4
| | | | | | | | | | | | | | | This patch adds a new state that when set has the core automatically kill request queues prior to removing namespaces. If PCI device is not present at the time the nvme driver's remove is called, we can kill all IO queues immediately instead of waiting for the watchdog thread to do that at its polling interval. This improves scenarios where multiple hot plug events occur at the same time since it doesn't block the pci enumeration for as long. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* NVMe: Reduce driver log spammingKeith Busch2016-05-171-1/+4
| | | | | | | | Reduce error logging when no corrective action is required. Suggessted-by: Chris Petersen <cpetersen@fb.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* NVMe: Unbind driver on failureKeith Busch2016-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | Instead of removing the PCI device from the kernel's topology on controller failure, this patch simply requests unbinding the device from the driver. This avoids concurrently running pci removal with the hot plug event, which has been reported to be problematic when multiple surprise events occur near simultaneously. The other benefit is that we will have PCI config and memory space available to poke around for debugging a failed controller, assuming the device was not physically removed. The down side occurs if the platform and/or kernel do not support any type of surprise hot removal. The device will remain visible through sysfs (and therefore lspci), and some manual work is necessary to get the logical topology corrected. But if your platform and/or kernel don't support surprise removal, you probably shouldn't be doing that anyway. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* NVMe: Delete only created queuesKeith Busch2016-05-171-2/+2
| | | | | | | | | | | | Use the online queue count instead of the number of allocated queues. The controller should just return an invalid queue identifier error to the commands if a queue wasn't created. While it's not harmful, it's still not correct. Reported-by: Saar Gross <saar@annapurnalabs.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* NVMe: Allocate queues only for online cpusKeith Busch2016-05-171-1/+1
| | | | | | | | | | | | | The driver previously requested allocating queues for the total possible number of CPUs so that blk-mq could rebalance these if CPUs were added after initialization. The number of hardware contexts can now be changed at runtime, so we only need to allocate the number of online queues since we can add more later. Suggested-by: Jeff Lien <jeff.lien@hgst.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge branch 'for-4.7/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2016-05-171-162/+87
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block driver updates from Jens Axboe: "On top of the core pull request, this is the drivers pull request for this merge window. This contains: - Switch drivers to the new write back cache API, and kill off the flush flags. From me. - Kill the discard support for the STEC pci-e flash driver. It's trivially broken, and apparently unmaintained, so it's safer to just remove it. From Jeff Moyer. - A set of lightnvm updates from the usual suspects (Matias/Javier, and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei Tao. - A set of updates for NVMe: - Turn the controller state management into a proper state machine. From Christoph. - Shuffling of code in preparation for NVMe-over-fabrics, also from Christoph. - Cleanup of the command prep part from Ming Lin. - Rewrite of the discard support from Ming Lin. - Deadlock fix for namespace removal from Ming Lin. - Use the now exported blk-mq tag helper for IO termination. From Sagi. - Various little fixes from Christoph, Guilherme, Keith, Ming Lin, Wang Sheng-Hui. - Convert mtip32xx to use the now exported blk-mq tag iter function, from Keith" * 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits) lightnvm: reserved space calculation incorrect lightnvm: rename nr_pages to nr_ppas on nvm_rq lightnvm: add is_cached entry to struct ppa_addr lightnvm: expose gennvm_mark_blk to targets lightnvm: remove mgt targets on mgt removal lightnvm: pass dma address to hardware rather than pointer lightnvm: do not assume sequential lun alloc. nvme/lightnvm: Log using the ctrl named device lightnvm: rename dma helper functions lightnvm: enable metadata to be sent to device lightnvm: do not free unused metadata on rrpc lightnvm: fix out of bound ppa lun id on bb tbl lightnvm: refactor set_bb_tbl for accepting ppa list lightnvm: move responsibility for bad blk mgmt to target lightnvm: make nvm_set_rqd_ppalist() aware of vblks lightnvm: remove struct factory_blks lightnvm: refactor device ops->get_bb_tbl() lightnvm: introduce nvm_for_each_lun_ppa() macro lightnvm: refactor dev->online_target to global nvm_targets lightnvm: rename nvm_targets to nvm_tgt_type ...
| * NVMe: Fix reset/remove raceKeith Busch2016-05-031-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a scenario where device is present and being reset, but a request to unbind the driver occurs. A previous patch series addressing a device failure removal scenario flushed reset_work after controller disable to unblock reset_work waiting on a completion that wouldn't occur. This isn't safe as-is. The broken scenario can potentially be induced with: modprobe nvme && modprobe -r nvme To fix, the reset work is flushed immediately after setting the controller removing flag, and any subsequent reset will not proceed with controller initialization if the flag is set. The controller status must be polled while active, so the watchdog timer is also left active until the controller is disabled to cleanup requests that may be stuck during namespace removal. [Fixes: ff23a2a15a2117245b4599c1352343c8b8fb4c43] Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: add helper nvme_cleanup_cmd()Ming Lin2016-05-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | This hides command cleanup into nvme.h and fabrics drivers will also use it. Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: move AER handling to common codeChristoph Hellwig2016-05-021-40/+9
| | | | | | | | | | | | | | | | | | The transport driver still needs to do the actual submission, but all the higher level code can be shared. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: move namespace scanning to coreChristoph Hellwig2016-05-021-27/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the scan work item and surrounding code to the common code. For now we need a new finish_scan method to allow the PCI driver to set the irq affinity hints, but I have plans in the works to obsolete this as well. Note that this moves the namespace scanning from nvme_wq to the system workqueue, but as we don't rely on namespace scanning to finish from reset or I/O this should be fine. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by Jon Derrick: <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: tighten up state check for namespace scanningChristoph Hellwig2016-05-021-2/+4
| | | | | | | | | | | | | | | | | | | | | | We only should be scanning namespaces if the controller is live. Currently we call the function just before setting it live, so fix the code up to move the call to nvme_queue_scan to just below the state change. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Acked-by Jon Derrick: <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: introduce a controller state machineChristoph Hellwig2016-05-021-13/+12
| | | | | | | | | | | | | | | | | | | | Replace the adhoc flags in the PCI driver with a state machine in the core code. Based on code from Sagi Grimberg for the Fabrics driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Acked-by Jon Derrick: <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: remove the io_incapable methodChristoph Hellwig2016-05-021-8/+0
| | | | | | | | | | | | | | | | | | It's unused since "NVMe: Move error handling to failed reset handler". Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
| * NVMe: Fix check_flush_dependency warningKeith Busch2016-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | If the controller fails and is degraded after a reset, we need to kill off all requests queues before removing the inaccessble namespaces. This will prevent del_gendisk from syncing dirty data, which we can't due from a WQ_MEM_RECLAIM work queue. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: Avoid reset work on watchdog timer function during error recoveryGuilherme G. Piccoli2016-04-131-8/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a check on nvme_watchdog_timer() function to avoid the call to reset_work() when an error recovery process is ongoing on controller. The check is made by looking at pci_channel_offline() result. If we don't check for this on nvme_watchdog_timer(), error recovery mechanism can't recover well, because reset_work() won't be able to do its job (since we're in the middle of an error) and so the controller is removed from the system before error recovery mechanism can perform slot reset (which would allow the adapter to recover). In this patch we also have split the huge condition expression on nvme_watchdog_timer() by introducing an auxiliary function to help make the code more readable. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * NVMe: silence warning about unused 'dev'Jens Axboe2016-04-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Depending on options, we might not be using dev in nvme_cancel_io(): drivers/nvme/host/pci.c: In function ‘nvme_cancel_io’: drivers/nvme/host/pci.c:970:19: warning: unused variable ‘dev’ [-Wunused-variable] struct nvme_dev *dev = data; ^ So get rid of it, and just cast for the dev_dbg_ratelimited() call. Fixes: 82b4552b91c4 ("nvme: Use blk-mq helper for IO termination") Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: Use blk-mq helper for IO terminationSagi Grimberg2016-04-121-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | blk-mq offers a tagset iterator so let's use that instead of using nvme_clear_queues. Note, we changed nvme_queue_cancel_ios name to nvme_cancel_io as there is no concept of a queue now in this function (we also lost the print). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * NVMe: Skip async events for degraded controllersKeith Busch2016-04-121-2/+10
| | | | | | | | | | | | | | | | | | | | | | If the controller is degraded, the driver should stay out of the way so the user can recover the drive. This patch skips driver initiated async event requests when the drive is in this state. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * nvme: add helper nvme_setup_cmd()Ming Lin2016-04-121-46/+1
| | | | | | | | | | | | | | | | | | | | | | This moves nvme_setup_{flush,discard,rw} calls into a common nvme_setup_cmd() helper. So we can eventually hide all the command setup in the core module and don't even need to update the fabrics drivers for any specific command type. Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-23 10:16:25 +0000