summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller
Commit message (Collapse)AuthorAgeFilesLines
* PCI/ASPM: Fix deadlock when enabling ASPMJohan Hovold2024-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7
* Merge tag 'pci-v6.8-changes' of ↵Linus Torvalds2024-01-1747-492/+797
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...
| * Merge branch 'pci/irq-clean-up'Bjorn Helgaas2024-01-1521-178/+165
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec terminology (Bjorn Helgaas) - Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence, designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape, mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop the redundant pci_epc_irq_type enum with the same values (Damien Le Moal) - Use "intx" instead of "leg" or "legacy" when describing INTx interrupts in endpoint core, endpoint tests, cadence, dra7xx, designware, dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4, rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal) * pci/irq-clean-up: PCI: xilinx-nwl: Use INTX instead of legacy PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler() PCI: rockchip-ep: Use INTX instead of legacy PCI: uniphier: Use INTX instead of legacy PCI: tegra194: Use INTX instead of legacy PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler() PCI: keystone: Use INTX instead of legacy PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq() PCI: cadence: Use INTX instead of legacy PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq() misc: pci_endpoint_test: Use INTX instead of LEGACY PCI: endpoint: Rename LEGACY to INTX in test function driver PCI: endpoint: Use INTX instead of legacy PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX
| | * PCI: xilinx-nwl: Use INTX instead of legacyDamien Le Moal2023-12-191-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the xilinx-nwl controller driver, change all use of "legacy" and "leg" to "intx", to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-17-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler()Damien Le Moal2023-12-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the function rockchip_pcie_legacy_int_handler() of the rockchip host driver to rockchip_pcie_intx_handler() to match the PCI_IRQ_INTX macro name used to control this function execution, and to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-16-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: rockchip-ep: Use INTX instead of legacyDamien Le Moal2023-12-191-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the function rockchip_pcie_ep_send_legacy_irq() of the rockchip endpoint driver to rockchip_pcie_ep_send_intx_irq(). Uses of the term "legacy" are also replaced with "INTX" in comments. Link: https://lore.kernel.org/r/20231122060406.14695-15-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: uniphier: Use INTX instead of legacyDamien Le Moal2023-12-192-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Designware uniphier controller driver, including the endpoint driver, change all names using "legacy" to use "intx", to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-14-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: tegra194: Use INTX instead of legacyDamien Le Moal2023-12-191-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Designware tegra194 controller driver, change all names using "legacy" to use "intx", to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-13-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler()Damien Le Moal2023-12-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the function rockchip_pcie_legacy_int_handler() to rockchip_pcie_intx_handler() to match the code managing INTX interrupts (e.g. intx_domain_ops) and the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-12-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: keystone: Use INTX instead of legacyDamien Le Moal2023-12-191-40/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Keystone controller driver, change all names using "legacy" to use "intx" instead, to match the term used in the PCI specifications. Given that the field legacy_intc_np of struct keystone_pcie is unused, this field is removed instead of being renamed. Link: https://lore.kernel.org/r/20231122060406.14695-11-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq()Damien Le Moal2023-12-197-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the function dw_pcie_ep_raise_legacy_irq() of the Designware endpoint controller driver to dw_pcie_ep_raise_intx_irq() to match the name of the PCI_IRQ_INTX macro. Link: https://lore.kernel.org/r/20231122060406.14695-10-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: cadence: Use INTX instead of legacyDamien Le Moal2023-12-192-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Cadence endpoint controller driver, rename the function cdns_pcie_ep_send_legacy_irq() to cdns_pcie_ep_send_intx_irq() to match the macro PCI_IRQ_INTX name. Related comments and messages mentioning "legacy" are also changed to refer to "intx". Link: https://lore.kernel.org/r/20231122060406.14695-9-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq()Damien Le Moal2023-12-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the function dra7xx_pcie_raise_legacy_irq() to dra7xx_pcie_raise_intx_irq() to match the use of the PCI_IRQ_INTX macro. Link: https://lore.kernel.org/r/20231122060406.14695-8-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
| | * PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitionsDamien Le Moal2023-12-1816-64/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint definitions provided by enum pci_epc_irq_type. This removes the need for defining this enum type completely. Link: https://lore.kernel.org/r/20231122060406.14695-3-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
| * | Merge branch 'pci/controller/remove-void-return'Bjorn Helgaas2024-01-153-12/+6
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) * pci/controller/remove-void-return: PCI: kirin: Convert to platform remove callback returning void PCI: keystone: Convert to platform remove callback returning void PCI: exynos: Convert to platform remove callback returning void
| | * | PCI: kirin: Convert to platform remove callback returning voidUwe Kleine-König2023-12-161-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/linux-pci/c3a51791d54deaa818b8526975fc4e16ef1090ce.1701682617.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| | * | PCI: keystone: Convert to platform remove callback returning voidUwe Kleine-König2023-12-161-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/linux-pci/06612aff79dfb52d5b0b20129dff5e4b1f04d3a7.1701682617.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| | * | PCI: exynos: Convert to platform remove callback returning voidUwe Kleine-König2023-12-161-4/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/linux-pci/50de44ea8931465fd9cdc821854ea761cb43adf6.1701682617.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| * | Merge branch 'pci/controller/xilinx'Bjorn Helgaas2024-01-151-9/+5
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) * pci/controller/xilinx: PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: xilinx-xdma: Remove redundant dev_err()
| | * | PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()Harshit Mogalapalli2024-01-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, if the function irq_domain_add_linear() fails to allocate a new IRQ domain and returns NULL, we would then still return a success from the xilinx_pl_dma_pcie_init_irq_domain() function regardless, as the PTR_ERR(NULL) would return a value of zero. This is not a desirable outcome. Thus, fix the incorrect error code and return the -ENOMEM error code if the irq_domain_add_linear() fails to allocate a new IRQ domain. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231030072757.3236546-1-harshit.m.mogalapalli@oracle.com Fixes: 8d786149d78c ("PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| | * | PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()Krzysztof Wilczyński2024-01-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error paths that follow calls to the devm_request_irq() functions within the xilinx_pl_dma_pcie_setup_irq() reference an uninitialized symbol each that also so happens to be incorrect. Thus, fix this omission and reference the correct variable when invoking a given dev_err() function following an error. This problem was found using smatch via the 0-DAY CI Kernel Test service: drivers/pci/controller/pcie-xilinx-dma-pl.c:638 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'. drivers/pci/controller/pcie-xilinx-dma-pl.c:645 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'. Fixes: 8d786149d78c ("PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver") Link: https://lore.kernel.org/oe-kbuild/202312120248.5DblxkBp-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202312120248.5DblxkBp-lkp@intel.com/ Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| | * | PCI: xilinx-xdma: Remove redundant dev_err()Yang Li2023-12-181-6/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. ./drivers/pci/controller/pcie-xilinx-dma-pl.c:688:2-9: line 688 is redundant because platform_get_irq() already prints an error ./drivers/pci/controller/pcie-xilinx-dma-pl.c:702:2-9: line 702 is redundant because platform_get_irq() already prints an error Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7074 Link: https://lore.kernel.org/linux-pci/20231030061242.51475-1-yang.lee@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| * | Merge branch 'pci/controller/vmd'Bjorn Helgaas2024-01-151-3/+3
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | - Use ida_alloc() instead of deprecated ida_simple_get() (Christophe JAILLET) * pci/controller/vmd: PCI: vmd: Remove usage of the deprecated ida_simple_xx() API
| | * | PCI: vmd: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET2023-12-131-3/+3
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Link: https://lore.kernel.org/linux-pci/270f25cdc154f3b0309e57b2f6421776752e2170.1702230593.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| * | Merge branch 'pci/controller/rcar'Bjorn Helgaas2024-01-152-2/+18
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) * pci/controller/rcar: PCI: rcar-host: Add support for optional regulators dt-bindings: PCI: rcar-pci-host: Add optional regulators PCI: rcar-gen4: Replace of_device.h with explicit of.h include
| | * | PCI: rcar-host: Add support for optional regulatorsWolfram Sang2023-12-141-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The KingFisher board has regulators for miniPCIe, so enable these optional regulators using devm. devm will automatically disable them when the driver releases the device. Order variables in reverse-xmas while we are here. [kwilczynski: update style to match rest of the code] Link: https://lore.kernel.org/linux-pci/20231105092908.3792-3-wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Manivannan Sadhasivam <mani@kernel.org>
| | * | PCI: rcar-gen4: Replace of_device.h with explicit of.h includeRob Herring2023-12-141-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231207165251.2855783-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
| * | Merge branch 'pci/controller/mediatek'Bjorn Helgaas2024-01-152-37/+58
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) * pci/controller/mediatek: PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler
| | * | PCI: mediatek-gen3: Fix translation window size calculationJianjun Wang2024-01-091-35/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using the fls() helper, the translation table should be a power of two; otherwise, the resulting value will not be correct. For example, given fls(0x3e00000) - 1 = 25, the PCIe translation window size will be set to 0x2000000 instead of the expected size 0x3e00000. Fix the translation window by splitting the MMIO space into multiple tables if its size is not a power of two. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231023081423.18559-1-jianjun.wang@mediatek.com Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192") Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
| | * | PCI: mediatek: Clear interrupt status before dispatching handlerqizhong cheng2024-01-091-2/+8
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We found a failure when using the iperf tool during WiFi performance testing, where some MSIs were received while clearing the interrupt status, and these MSIs cannot be serviced. The interrupt status can be cleared even if the MSI status remains pending. As such, given the edge-triggered interrupt type, its status should be cleared before being dispatched to the handler of the underling device. [kwilczynski: commit log, code comment wording] Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: rewrap comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: <stable@vger.kernel.org>
| * | Merge branch 'pci/controller/layerscape'Bjorn Helgaas2024-01-152-31/+176
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add suspend/resume support for Layerscape LS1043a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) * pci/controller/layerscape: PCI: layerscape: Add suspend/resume for ls1043a PCI: layerscape(ep): Rename pf_* as pf_lut_* PCI: layerscape: Add suspend/resume for ls1021a PCI: layerscape: Add function pointer for exit_from_l2()
| | * | PCI: layerscape: Add suspend/resume for ls1043aFrank Li2023-12-121-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add suspend/resume support for Layerscape LS1043a. In the suspend path, PME_Turn_Off message is sent to the endpoint to transition the link to L2/L3_Ready state. In this SoC, there is no way to check if the controller has received the PME_To_Ack from the endpoint or not. So to be on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on the VAUX supply. In the resume path, the link is brought back from L2 to L0 by doing a software reset. Link: https://lore.kernel.org/r/20231204160829.2498703-5-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
| | * | PCI: layerscape(ep): Rename pf_* as pf_lut_*Frank Li2023-12-122-25/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'pf' and 'lut' are two different acronyms describing the same thing, basically it is a MMIO base address plus an offset. Rename them to avoid duplicate pf_* and lut_* naming schemes in the driver. Link: https://lore.kernel.org/r/20231204160829.2498703-4-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
| | * | PCI: layerscape: Add suspend/resume for ls1021aFrank Li2023-12-121-3/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add suspend/resume support for Layerscape LS1021a. In the suspend path, PME_Turn_Off message is sent to the endpoint to transition the link to L2/L3_Ready state. In this SoC, there is no way to check if the controller has received the PME_To_Ack from the endpoint or not. So to be on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on the VAUX supply. In the resume path, the link is brought back from L2 to L0 by doing a software reset. Link: https://lore.kernel.org/r/20231204160829.2498703-3-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
| | * | PCI: layerscape: Add function pointer for exit_from_l2()Frank Li2023-12-121-2/+9
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since different SoCs require different sequences for exiting L2, let's add a separate "exit_from_l2()" callback to handle SoC specific sequences. Change ls_pcie_exit_from_l2() return value from void to int in order to propagate errors. Return an error if the exit_from_l2() callback fails in the resume flow. Link: https://lore.kernel.org/r/20231204160829.2498703-2-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
| * | Merge branch 'pci/controller/kirin'Bjorn Helgaas2024-01-151-8/+5
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Use devm_kasprintf() to dynamically allocate clock names, removing need for an intermediate buffer (Christophe JAILLET) * pci/controller/kirin: PCI: kirin: Use devm_kasprintf() to dynamically allocate clock names
| | * | PCI: kirin: Use devm_kasprintf() to dynamically allocate clock namesChristophe JAILLET2023-12-171-8/+5
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_kasprintf() instead of open coding it. This saves the need of an intermediate buffer. There was also no reason to use devm_kstrdup_const() as string is known to be constant. [kwilczynski: commit log, and add missing Reviewed-by tag] Link: https://lore.kernel.org/linux-pci/1bad6879083a7d836c8a47418a0afa22485e8f69.1700294127.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
| * | Merge branch 'pci/controller/keystone'Bjorn Helgaas2024-01-151-0/+9
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) * pci/controller/keystone: PCI: keystone: Fix race condition when initializing PHYs
| | * | PCI: keystone: Fix race condition when initializing PHYsSiddharth Vadapalli2024-01-091-0/+9
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy() function. The PHY in this case is the Serdes. It is possible that the PCI instance is configured for two lane operation across two different Serdes instances, using one lane of each Serdes. In such a configuration, if the reference clock for one Serdes is provided by the other Serdes, it results in a race condition. After the Serdes providing the reference clock is initialized by the PCI driver by invoking its PHY APIs, it is not guaranteed that this Serdes remains powered on long enough for the PHY APIs based initialization of the dependent Serdes. In such cases, the PLL of the dependent Serdes fails to lock due to the absence of the reference clock from the former Serdes which has been powered off by the PM Core. Fix this by obtaining reference to the PHYs before invoking the PHY initialization APIs and releasing reference after the initialization is complete. Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
| * | Merge branch 'pci/controller/dwc'Bjorn Helgaas2024-01-1531-193/+222
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) - Cast iproc and rcar-gen4 of_device_get_match_data() results to uintptr_t to avoid clang "cast to smaller integer type" warnings (Justin Stitt, Yoshihiro Shimoda) * pci/controller/dwc: PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support PCI: dwc: Convert SOC_SIFIVE to ARCH_SIFIVE
| | * | PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast errorYoshihiro Shimoda2024-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building with clang 18 with the -Werror compiler option enabled, the following error will be reported: drivers/pci/controller/dwc/pcie-rcar-gen4.c:439:15: error: cast to smaller integer type 'enum dw_pcie_device_mode' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] 439 | rcar->mode = (enum dw_pcie_device_mode)of_device_get_match_data(&rcar->pdev->dev); To fix this issue, cast the data the of_device_get_match_data() helper returns to uintptr_t rather than the dw_pcie_device_mode enum. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-7-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
| | * | PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warningJustin Stitt2024-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building with clang 18, the following warning will be reported: drivers/pci/controller/pcie-iproc-platform.c:54:15: warning: cast to smaller integer type 'enum iproc_pcie_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] 55 | pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev); To fix this issue, cast the data the of_device_get_match_data() helper returns to uintptr_t rather than the iproc_pcie_type enum. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-6-yoshihiro.shimoda.uh@renesas.com Link: https://github.com/ClangBuiltLinux/linux/issues/1910 Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
| | * | PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpersYoshihiro Shimoda2024-01-062-124/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code calculated some dbi[2] registers' offset by calling dw_pcie_ep_get_dbi[2]_offset() in each function. To improve the code readability, add dw_pcie_ep_{read,write}_dbi[2} and some data-width related helpers. Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
| | * | PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_opsYoshihiro Shimoda2024-01-064-60/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the struct member .func_conf_select makes the intentions behind it difficult to ascertain from its name alone, rename it to .get_dbi_offset to make the intended usage more obvious. [kwilczynski: commmit log] Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
| | * | PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_opsYoshihiro Shimoda2024-01-0612-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the name of the dw_pcie_ep_ops struct makes it obvious that it's for the PCIe Endpoint, rename the struct member .ep_init to .init. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
| | * | PCI: dwc: Drop host prefix from struct dw_pcie_host_ops membersYoshihiro Shimoda2024-01-0623-47/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the name of the dw_pcie_host_ops struct makes it obvious that it's for the PCIe Host, drop the host prefix from the struct members. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Lei Chuanhua <lchuanhua@maxlinear.com> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
| | * | PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment supportNiklas Cassel2023-12-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to support iATUs which require a specific alignment. However, this support cannot have been properly tested. The whole point is for the iATU to map an address that is aligned, using dw_pcie_ep_map_addr(), and then let the writel() write to ep->msi_mem + aligned_offset. Thus, modify the address that is mapped such that it is aligned. With this change, dw_pcie_ep_raise_msix_irq() matches the logic in dw_pcie_ep_raise_msi_irq(). Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org # 5.7 Cc: Kishon Vijay Abraham I <kishon@kernel.org>
| | * | PCI: dwc: Convert SOC_SIFIVE to ARCH_SIFIVEConor Dooley2023-12-161-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the SiFive PCI drivers to use the newer symbol. Link: https://lore.kernel.org/linux-pci/20230918-safeness-cornflake-62278bc3aaaa@wendy Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
| * | Merge branch 'pci/controller/cadence'Bjorn Helgaas2024-01-152-5/+42
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) * pci/controller/cadence: PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI: j721e: Add PCIe 4x lane selection support PCI: j721e: Add per platform maximum lane settings dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
| | * | PCI: j721e: Make TI J721E depend on ARCH_K3Peter Robinson2024-01-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The J721E PCIe is hardware specific to TI SoC parts so add a dependency on that so it's available for those SoC parts and for compile testing but not necessarily everyone who enables the Cadence PCIe controller. Link: https://lore.kernel.org/linux-pci/20240104213910.1426843-1-pbrobinson@gmail.com Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-25 09:33:25 +0000