summaryrefslogtreecommitdiffstats
path: root/drivers/pci/quirks.c
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Mark AMD Navi10 GPU rev 0x00 ATS as brokenKai-Heng Feng2020-08-211-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 45beb31d3afb651bb5c41897e46bd4fa9980c51c upstream. We are seeing AMD Radeon Pro W5700 doesn't work when IOMMU is enabled: iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0] iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01c0] The error also makes graphics driver fail to probe the device. It appears to be the same issue as commit 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") addresses, and indeed the same ATS quirk can workaround the issue. See-also: 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208725 Link: https://lore.kernel.org/r/20200728104554.28927-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Release IVRS table in AMD ACS quirkHanjun Guo2020-08-191-0/+2
| | | | | | | | | | | | | | | | [ Upstream commit 090688fa4e448284aaa16136372397d7d10814db ] The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping. In pci_quirk_amd_sb_acs(), IVRS table is just used for checking AMD IOMMU is supported, not used at runtime, so put the table after using it. Fixes: 15b100dfd1c9 ("PCI: Claim ACS support for AMD southbridge devices") Link: https://lore.kernel.org/r/1595411068-15440-1-git-send-email-guohanjun@huawei.com Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridgeRobert Hancock2020-08-051-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b361663c5a40c8bc758b7f7f2239f7a192180e7c upstream. Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e59e8a ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.com Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Add ACS quirk for Intel Root Complex Integrated EndpointsAshok Raj2020-06-221-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3247bd10a4502a3075ce8e1c3c7d31ef76f193ce ] All Intel platforms guarantee that all root complex implementations must send transactions up to IOMMU for address translations. Hence for Intel RCiEP devices, we can assume some ACS-type isolation even without an ACS capability. From the Intel VT-d spec, r3.1, sec 3.16 ("Root-Complex Peer to Peer Considerations"): When DMA remapping is enabled, peer-to-peer requests through the Root-Complex must be handled as follows: - The input address in the request is translated (through first-level, second-level or nested translation) to a host physical address (HPA). The address decoding for peer addresses must be done only on the translated HPA. Hardware implementations are free to further limit peer-to-peer accesses to specific host physical address regions (or to completely disallow peer-forwarding of translated requests). - Since address translation changes the contents (address field) of the PCI Express Transaction Layer Packet (TLP), for PCI Express peer-to-peer requests with ECRC, the Root-Complex hardware must use the new ECRC (re-computed with the translated address) if it decides to forward the TLP as a peer request. - Root-ports, and multi-function root-complex integrated endpoints, may support additional peer-to-peer control features by supporting PCI Express Access Control Services (ACS) capability. Refer to ACS capability in PCI Express specifications for details. Since Linux didn't give special treatment to allow this exception, certain RCiEP MFD devices were grouped in a single IOMMU group. This doesn't permit a single device to be assigned to a guest for instance. In one vendor system: Device 14.x were grouped in a single IOMMU group. /sys/kernel/iommu_groups/5/devices/0000:00:14.0 /sys/kernel/iommu_groups/5/devices/0000:00:14.2 /sys/kernel/iommu_groups/5/devices/0000:00:14.3 After this patch: /sys/kernel/iommu_groups/5/devices/0000:00:14.0 /sys/kernel/iommu_groups/5/devices/0000:00:14.2 /sys/kernel/iommu_groups/6/devices/0000:00:14.3 <<< new group 14.0 and 14.2 are integrated devices, but legacy end points, whereas 14.3 was a PCIe-compliant RCiEP. 00:14.3 Network controller: Intel Corporation Device 9df0 (rev 30) Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 This permits assigning this device to a guest VM. [bhelgaas: drop "Fixes" tag since this doesn't fix a bug in that commit] Link: https://lore.kernel.org/r/1590699462-7131-1-git-send-email-ashok.raj@intel.com Tested-by: Darrel Goeddel <dgoeddel@forcepoint.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Mark Scott <mscott@forcepoint.com>, Cc: Romil Sharma <rsharma@forcepoint.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Avoid FLR for AMD Starship USB 3.0Kevin Buettner2020-06-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5727043c73fdfe04597971b5f3f4850d879c1f4f ] The AMD Starship USB 3.0 host controller advertises Function Level Reset support, but it apparently doesn't work. Add a quirk to prevent use of FLR on this device. Without this quirk, when attempting to assign (pass through) an AMD Starship USB 3.0 host controller to a guest OS, the system becomes increasingly unresponsive over the course of several minutes, eventually requiring a hard reset. Shortly after attempting to start the guest, I see these messages: vfio-pci 0000:05:00.3: not ready 1023ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 2047ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 4095ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 8191ms after FLR; waiting And then eventually: vfio-pci 0000:05:00.3: not ready 65535ms after FLR; giving up INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.000 msecs perf: interrupt took too long (642744 > 2500), lowering kernel.perf_event_max_sample_rate to 1000 INFO: NMI handler (perf_event_nmi_handler) took too long to run: 82.270 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 680.608 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 100.952 msecs ... watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [qemu-system-x86:7487] Tested on a Micro-Star International Co., Ltd. MS-7C59/Creator TRX40 motherboard with an AMD Ryzen Threadripper 3970X. Link: https://lore.kernel.org/r/20200524003529.598434ff@f31-4.lan Signed-off-by: Kevin Buettner <kevinb@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0Marcos Scriven2020-06-221-4/+14
| | | | | | | | | | | | | | | | | | | [ Upstream commit 0d14f06cd6657ba3446a5eb780672da487b068e7 ] The AMD Matisse HD Audio & USB 3.0 devices advertise Function Level Reset support, but hang when an FLR is triggered. To reproduce the problem, attach the device to a VM, then detach and try to attach again. Rename the existing quirk_intel_no_flr(), which was not Intel-specific, to quirk_no_flr(), and apply it to prevent the use of FLR on these AMD devices. Link: https://lore.kernel.org/r/CAAri2DpkcuQZYbT6XsALhx2e6vRqPHwtbjHYeiH7MNp4zmt1RA@mail.gmail.com Signed-off-by: Marcos Scriven <marcos@scriven.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Avoid Pericom USB controller OHCI/EHCI PME# defectKai-Heng Feng2020-06-221-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 68f5fc4ea9ddf9f77720d568144219c4e6452cde ] Both Pericom OHCI and EHCI devices advertise PME# support from all power states: 06:00.0 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] (rev 01) (prog-if 10 [OHCI]) Subsystem: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 06:00.2 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] (rev 01) (prog-if 20 [EHCI]) Subsystem: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) But testing shows that it's unreliable: there is a 20% chance PME# won't be asserted when a USB device is plugged. Remove PME support for both devices to make USB plugging work reliably. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205981 Link: https://lore.kernel.org/r/20200508065343.32751-2-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Move Apex Edge TPU class quirk to fix BAR assignmentBjorn Helgaas2020-04-141-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Debugged-by: Luís Mendes <luis.p.mendes@gmail.com> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com>
* Merge branch 'pci/virtualization'Bjorn Helgaas2020-04-021-0/+29
|\ | | | | | | | | | | | | | | | | | | - Add ACS quirks for Zhaoxin Root Ports, Downstream Ports, and multi-function devices (Raymond Pang) * pci/virtualization: PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports PCI: Add ACS quirk for Zhaoxin multi-function devices PCI: Add Zhaoxin Vendor ID
| * PCI: Add ACS quirk for Zhaoxin Root/Downstream PortsRaymond Pang2020-03-281-0/+25
| | | | | | | | | | | | | | | | | | | | | | Many Zhaoxin Root Ports and Switch Downstream Ports do provide ACS-like capability but have no ACS Capability Structure. Peer-to-Peer transactions could be blocked between these ports, so add quirk so devices behind them could be assigned to different IOMMU group. Link: https://lore.kernel.org/r/20200327091148.5190-4-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * PCI: Add ACS quirk for Zhaoxin multi-function devicesRaymond Pang2020-03-281-0/+4
| | | | | | | | | | | | | | | | | | | | Some Zhaoxin endpoints are implemented as multi-function devices without an ACS capability, but they actually don't support peer-to-peer transactions. Add ACS quirks to declare DMA isolation. Link: https://lore.kernel.org/r/20200327091148.5190-3-RaymondPang-oc@zhaoxin.com Signed-off-by: Raymond Pang <RaymondPang-oc@zhaoxin.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'pci/misc'Bjorn Helgaas2020-04-021-0/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Move _HPX type array from stack to static data (Colin Ian King) - Avoid an ASMedia XHCI USB PME# defect; apparently it doesn't assert PME# when USB3.0 devices are hotplugged in D0 (Kai-Heng Feng) - Revert sysfs "rescan" file renames that broke an application (Kelsey Skunberg) * pci/misc: PCI: sysfs: Revert "rescan" file renames PCI: Avoid ASMedia XHCI USB PME# from D0 defect PCI/ACPI: Move pcie_to_hpx3_type[] from stack to static data
| * | PCI: Avoid ASMedia XHCI USB PME# from D0 defectKai-Heng Feng2020-03-191-0/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASMedia USB XHCI Controller claims to support generating PME# while in D0: 01:00.0 USB controller: ASMedia Technology Inc. Device 2142 (prog-if 30 [XHCI]) Subsystem: SUNIX Co., Ltd. Device 312b Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- However PME# only gets asserted when plugging USB 2.0 or USB 1.1 devices, but not for USB 3.0 devices. Remove PCI_PM_CAP_PME_D0 to avoid using PME under D0. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205919 Link: https://lore.kernel.org/r/20191219192006.16270-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* / PCI: Add boot interrupt quirk mechanism for Xeon chipsetsSean V Kelley2020-02-271-7/+73
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following was observed by Kar Hin Ong with RT patchset: Backtrace: irq 19: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 3329 Comm: irq/34-nipalk Tainted:4.14.87-rt49 #1 Hardware name: National Instruments NI PXIe-8880/NI PXIe-8880, BIOS 2.1.5f1 01/09/2020 Call Trace: <IRQ> ? dump_stack+0x46/0x5e ? __report_bad_irq+0x2e/0xb0 ? note_interrupt+0x242/0x290 ? nNIKAL100_memoryRead16+0x8/0x10 [nikal] ? handle_irq_event_percpu+0x55/0x70 ? handle_irq_event+0x4f/0x80 ? handle_fasteoi_irq+0x81/0x180 ? handle_irq+0x1c/0x30 ? do_IRQ+0x41/0xd0 ? common_interrupt+0x84/0x84 </IRQ> ... handlers: [<ffffffffb3297200>] irq_default_primary_handler threaded [<ffffffffb3669180>] usb_hcd_irq Disabling IRQ #19 The problem being that this device is triggering boot interrupts due to threaded interrupt handling and masking of the IO-APIC. These boot interrupts are then forwarded on to the legacy PCH's PIRQ lines where there is no handler present for the device. Whenever a PCI device fires interrupt (INTx) to Pin 20 of IOAPIC 2 (GSI 44), the kernel receives two interrupts: 1. Interrupt from Pin 20 of IOAPIC 2 -> Expected 2. Interrupt from Pin 19 of IOAPIC 1 -> UNEXPECTED Quirks for disabling boot interrupts (preferred) or rerouting the handler exist but do not address these Xeon chipsets' mechanism: https://lore.kernel.org/lkml/12131949181903-git-send-email-sassmann@suse.de/ Add a new mechanism via PCI CFG for those chipsets supporting CIPINTRC register's dis_intx_rout2ich bit. Link: https://lore.kernel.org/r/20200220192930.64820-2-sean.v.kelley@linux.intel.com Reported-by: Kar Hin Ong <kar.hin.ong@ni.com> Tested-by: Kar Hin Ong <kar.hin.ong@ni.com> Signed-off-by: Sean V Kelley <sean.v.kelley@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
* Merge tag 'pci-v5.6-changes' of ↵Linus Torvalds2020-01-311-47/+70
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Improve resource assignment for hot-added nested bridges, e.g., Thunderbolt (Nicholas Johnson) Power management: - Optionally print config space of devices before suspend (Chen Yu) - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake) Virtualization: - Generalize DMA alias quirks (James Sewart) - Add DMA alias quirk for PLX PEX NTB (James Sewart) - Fix IOV memory leak (Navid Emamdoost) AER: - Log which device prevents error recovery (Yicong Yang) Peer-to-peer DMA: - Whitelist Intel SkyLake-E (Armen Baloyan) Broadcom iProc host bridge driver: - Apply PAXC quirk whether driver is built-in or module (Wei Liu) Broadcom STB host bridge driver: - Add Broadcom STB PCIe host controller driver (Jim Quinlan) Intel Gateway SoC host bridge driver: - Add driver for Intel Gateway SoC (Dilip Kota) Intel VMD host bridge driver: - Add support for DMA aliases on other buses (Jon Derrick) - Remove dma_map_ops overrides (Jon Derrick) - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig) NVIDIA Tegra host bridge driver: - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler) Panasonic UniPhier host bridge driver: - Remove module code since driver can't be built as a module (Masahiro Yamada) Qualcomm host bridge driver: - Add support for SDM845 PCIe controller (Bjorn Andersson) TI Keystone host bridge driver: - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I) - Fix link training retries initiation (Yurii Monakov) - Fix outbound region mapping (Yurii Monakov) Misc: - Add Switchtec Gen4 support (Kelvin Cao) - Add Switchtec Intercomm Notify and Upstream Error Containment support (Logan Gunthorpe) - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit addressing (Wesley Sheng)" * tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits) PCI: Allow adjust_bridge_window() to shrink resource if necessary PCI: Set resource size directly in adjust_bridge_window() PCI: Rename extend_bridge_window() to adjust_bridge_window() PCI: Rename extend_bridge_window() parameter PCI: Consider alignment of hot-added bridges when assigning resources PCI: Remove local variable usage in pci_bus_distribute_available_resources() PCI: Pass size + alignment to pci_bus_distribute_available_resources() PCI: Rename variables PCI: vmd: Add two VMD Device IDs PCI: Remove unnecessary braces PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver x86/PCI: Remove X86_DEV_DMA_OPS PCI: vmd: Remove dma_map_ops overrides iommu/vt-d: Remove VMD child device sanity check iommu/vt-d: Use pci_real_dma_dev() for mapping PCI: Introduce pci_real_dma_dev() x86/PCI: Expose VMD's pci_dev in struct pci_sysdata x86/PCI: Add to_pci_sysdata() helper PCI/AER: Initialize aer_fifo ...
| * Merge branch 'pci/virtualization'Bjorn Helgaas2020-01-291-14/+24
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix memory leak in pci_iov_add_virtfn() (Navid Emamdoost) - Extend pci_add_dma_alias() so it can add a range of aliases (James Sewart) - Add DMA aliases for PLX PEX NTB (James Sewart) * pci/virtualization: PCI: Add DMA alias quirk for PLX PEX NTB PCI: Add nr_devfns parameter to pci_add_dma_alias() PCI: Fix pci_add_dma_alias() bitmask size PCI/IOV: Fix memory leak in pci_iov_add_virtfn()
| | * PCI: Add DMA alias quirk for PLX PEX NTBJames Sewart2019-12-181-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PLX PEX NTB forwards DMA transactions using Requester IDs that don't exist as PCI devices. The devfn for a transaction is used as an index into a lookup table storing the origin of a transaction on the other side of the bridge. Alias all possible devfns to the NTB device so that any transaction coming in is governed by the mappings for the NTB. Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
| | * PCI: Add nr_devfns parameter to pci_add_dma_alias()James Sewart2019-12-181-14/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a "nr_devfns" parameter to pci_add_dma_alias() so it can be used to create DMA aliases for a range of devfns. [bhelgaas: incorporate nr_devfns fix from James, update quirk_pex_vca_alias() and setup_aliases()] Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | Merge branch 'pci/switchtec'Bjorn Helgaas2020-01-291-0/+18
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Support 64-bit addressing for both streaming and coherent DMA (Wesley Sheng) - Read vep_vector_number with 16-bit, not 32-bit read (Logan Gunthorpe) - Add Intercomm Notify and Upstream Error Containment support (Logan Gunthorpe) - Remove redundant valid PFF number count (Wesley Sheng) - Avoid unnecessary CSR read in ISR (Wesley Sheng) - Rename Gen3-specific constants (Logan Gunthorpe) - Rework infrastructure to support Gen3- and Gen4-specific code (Logan Gunthorpe) - Add Gen4 system info register support (Logan Gunthorpe) - Add Gen4 flash information interface support (Kelvin Cao) - Add Gen4 MRPC GAS access permission check (Kelvin Cao) * pci/switchtec: PCI/switchtec: Add Gen4 device IDs PCI/switchtec: Add Gen4 MRPC GAS access permission check PCI/switchtec: Add Gen4 flash information interface support PCI/switchtec: Add Gen4 system info register support PCI/switchtec: Separate Gen3 register structures into unions PCI/switchtec: Factor out Gen3 ioctl_flash_part_info() PCI/switchtec: Add 'generation' variable PCI/switchtec: Rename generation-specific constants PCI/switchtec: Move check event ID from mask_event() to switchtec_event_isr() PCI/switchtec: Remove redundant valid PFF number count PCI/switchtec: Add support for Intercomm Notify and Upstream Error Containment PCI/switchtec: Fix vep_vector_number ioread width PCI/switchtec: Use dma_set_mask_and_coherent()
| | * | PCI/switchtec: Add Gen4 device IDsKelvin Cao2020-01-151-0/+18
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that Gen4 is properly supported, advertise support in the module's device ID table and add the same IDs to the list of switchtec quirks. [logang@deltatee.com: add commit message and quirk IDs] Link: https://lore.kernel.org/r/20200115035648.2578-8-logang@deltatee.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllersDaniel Drake2019-12-131-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Asus UX434DA (AMD Ryzen7 3700U) and Asus X512DK (AMD Ryzen5 3500U), the XHCI controller fails to resume from runtime suspend or s2idle, and USB becomes unusable from that point. xhci_hcd 0000:03:00.4: Refused to change power state, currently in D3 xhci_hcd 0000:03:00.4: enabling device (0000 -> 0002) xhci_hcd 0000:03:00.4: WARN: xHC restore state timeout xhci_hcd 0000:03:00.4: PCI post-resume error -110! xhci_hcd 0000:03:00.4: HC died; cleaning up During suspend, a transition to D3cold is attempted, however the affected platforms do not seem to cut the power to the PCI device when in this state, so the device stays in D3hot. Upon resume, the D3hot-to-D0 transition is successful only if the D3 delay is increased to 20ms. The transition failure does not appear to be detectable as a CRS condition. Add a PCI quirk to increase the delay on the affected hardware. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205587 Link: http://lkml.kernel.org/r/CAD8Lp47Vh69gQjROYG69=waJgL7hs1PwnLonL9+27S_TcRhixA@mail.gmail.com Link: https://lore.kernel.org/r/20191127053836.31624-2-drake@endlessm.com Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | PCI: Add generic quirk for increasing D3hot delayDaniel Drake2019-12-131-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the D3 delay increase functionality out of quirk_radeon_pm() into its own function so that it can be shared with other quirks, including the AMD Ryzen XHCI quirk that will be introduced in a followup commit. Tweak the function name and message to indicate more clearly that the delay relates to a D3hot-to-D0 transition. Link: https://lore.kernel.org/r/20191127053836.31624-1-drake@endlessm.com Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * | PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-inWei Liu2019-12-121-26/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously quirk_paxc_bridge() was applied when the iproc driver was built-in, but not when it was compiled as a module. This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM: PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be defined. Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk is always applied, whether iproc is built-in or a module. [bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c] Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds2020-01-271-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
| * | remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2020-01-061-2/+2
| |/ | | | | | | | | | | | | | | ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
* / PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as brokenAlex Deucher2020-01-151-6/+13
|/ | | | | | | | | | | | | | | | | | | | | | | To account for parts of the chip that are "harvested" (disabled) due to silicon flaws, caches on some AMD GPUs must be initialized before ATS is enabled. ATS is normally enabled by the IOMMU driver before the GPU driver loads, so this cache initialization would have to be done in a quirk, but that's too complex to be practical. For Navi14 (device ID 0x7340), this initialization is done by the VBIOS, but apparently some boards went to production with an older VBIOS that doesn't do it. Disable ATS for those boards. Link: https://lore.kernel.org/r/20200114205523.1054271-3-alexander.deucher@amd.com Bug: https://gitlab.freedesktop.org/drm/amd/issues/1015 See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: squash into one patch, simplify slightly, commit log] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
* Merge branch 'pci/trivial'Bjorn Helgaas2019-11-281-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski) * pci/trivial: PCI: Fix indentation PCI: Fix typos PCI: Remove useless comments and tidy others PCI: Remove unnecessary includes # Conflicts: # drivers/pci/probe.c
| * PCI: Fix typosBjorn Helgaas2019-11-201-1/+0
| | | | | | | | | | | | Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'pci/virtualization'Bjorn Helgaas2019-11-281-46/+106
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Unify ACS quirk implementations (Bjorn Helgaas) * pci/virtualization: PCI: Unify ACS quirk desired vs provided checking PCI: Make ACS quirk implementations more uniform PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes PCI: Add DMA alias quirk for Intel VCA NTB PCI: Fix Intel ACS quirk UPDCR register address PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL() PCI/ATS: Remove unused PRI and PASID stubs PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h PCI/ATS: Cache PRI PRG Response PASID Required bit PCI/ATS: Cache PASID Capability offset PCI/ATS: Cache PRI Capability offset PCI/ATS: Disable PF/VF ATS service independently PCI/ATS: Handle sharing of PF PASID Capability with all VFs PCI/ATS: Handle sharing of PF PRI Capability with all VFs PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
| * | PCI: Unify ACS quirk desired vs provided checkingBjorn Helgaas2019-11-141-22/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the ACS quirks have a similar pattern of: acs_flags &= ~( <controls provided by this device> ); return acs_flags ? 0 : 1; Pull this out into a helper function to simplify the quirks slightly. The helper function is also a convenient place for comments about what the list of ACS controls means. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
| * | PCI: Make ACS quirk implementations more uniformBjorn Helgaas2019-11-141-22/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACS quirks differ in needless ways, which makes them look more different than they really are. Reorder the ACS flags in order of definitions in the spec: PCI_ACS_SV Source Validation PCI_ACS_TB Translation Blocking PCI_ACS_RR P2P Request Redirect PCI_ACS_CR P2P Completion Redirect PCI_ACS_UF Upstream Forwarding PCI_ACS_EC P2P Egress Control PCI_ACS_DT Direct Translated P2P (PCIe r5.0, sec 7.7.8.2) and use similar code structure in all. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
| * | PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3George Cherian2019-11-111-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enhance the ACS quirk for Cavium Processors. Add the root port vendor IDs for ThunderX2 and ThunderX3 series of processors. [bhelgaas: add Fixes: and stable tag] Fixes: f2ddaf8dfd4a ("PCI: Apply Cavium ThunderX ACS quirk to more Root Ports") Link: https://lore.kernel.org/r/20191111024243.GA11408@dc5-eodlnx05.marvell.com Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Robert Richter <rrichter@marvell.com> Cc: stable@vger.kernel.org # v4.12+
| * | PCI: Add DMA alias quirk for Intel VCA NTBSlawomir Pawlowski2019-10-151-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices exposing computational units via Non Transparent Bridges (NTB, PEX 87xx). Similarly to MIC x200, we need to add DMA aliases to allow buffer access when IOMMU is enabled. Add aliases to allow computational unit access to host memory. These aliases mark the whole VCA device as one IOMMU group. All possible slot numbers (0x20) are used, since we are unable to tell what slot is used on other side. This quirk is intended for both host and computational unit sides. The VCA devices have up to five functions: four for DMA channels and one additional. Link: https://lore.kernel.org/r/5683A335CC8BE1438C3C30C49DCC38DF637CED8E@IRSMSX102.ger.corp.intel.com Signed-off-by: Slawomir Pawlowski <slawomir.pawlowski@intel.com> Signed-off-by: Przemek Kitszel <przemyslawx.kitszel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | PCI: Fix Intel ACS quirk UPDCR register addressSteffen Liebergeld2019-10-151-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to documentation [0] the correct offset for the Upstream Peer Decode Configuration Register (UPDCR) is 0x1014. It was previously defined as 0x1114. d99321b63b1f ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports") intended to enforce isolation between PCI devices allowing them to be put into separate IOMMU groups. Due to the wrong register offset the intended isolation was not fully enforced. This is fixed with this patch. Please note that I did not test this patch because I have no hardware that implements this register. [0] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/4th-gen-core-family-mobile-i-o-datasheet.pdf (page 325) Fixes: d99321b63b1f ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports") Link: https://lore.kernel.org/r/7a3505df-79ba-8a28-464c-88b83eefffa6@kernkonzept.com Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org # v3.15+
* / PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov2019-10-141-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
* Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds2019-09-231-1/+105
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
| * Merge branch 'lorenzo/pci/tegra'Bjorn Helgaas2019-09-231-0/+53
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak
| | * PCI: Disable MSI for Tegra root portsVidya Sagar2019-08-131-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra PCIe rootports don't generate MSI interrupts for PME and AER events. Since PCIe spec (Ref: r4.0 sec 7.7.1.2 and 7.7.2.2) doesn't support using a mix of INTx and MSI/MSI-X, MSI needs to be disabled to avoid root ports service drivers registering their respective ISRs with MSI interrupt and to let only INTx be used for all events. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
| * | Merge branch 'remotes/lorenzo/pci/al'Bjorn Helgaas2019-09-231-0/+38
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add driver for Amazon Annapurna Labs PCIe controller (Jonathan Chocron) - Disable MSI-X since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Disable VPD since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Add ACS quirk since Annapurna Labs doesn't support ACS but does provide some equivalent protections (Ali Saidi) * remotes/lorenzo/pci/al: PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID # Conflicts: # drivers/pci/quirks.c
| | * | PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root PortJonathan Chocron2019-09-161-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Root Port (identified by [1c36:0031]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: SError Interrupt on CPU2, code 0xbf000000 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __pci_enable_msix_range+0x4e4/0x608 lr : __pci_enable_msix_range+0x498/0x608 sp : ffffff80117db700 x29: ffffff80117db700 x28: 0000000000000001 x27: 0000000000000001 x26: 0000000000000000 x25: ffffffd3e9d8c0b0 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 x20: 0000000000000000 x19: ffffffd3e9d8c000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff80116496c8 x14: ffffffd3e9844503 x13: ffffffd3e9844502 x12: 0000000000000038 x11: ffffffffffffff00 x10: 0000000000000040 x9 : ffffff801165e270 x8 : ffffff801165e268 x7 : 0000000000000002 x6 : 00000000000000b2 x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffffd3e9844680 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 Hardware name: Annapurna Labs Alpine V3 EVP (DT) Call trace: dump_backtrace+0x0/0x140 show_stack+0x14/0x20 dump_stack+0xa8/0xcc panic+0x140/0x334 nmi_panic+0x6c/0x70 arm64_serror_panic+0x74/0x88 __pte_error+0x0/0x28 el1_error+0x84/0xf8 __pci_enable_msix_range+0x4e4/0x608 pci_alloc_irq_vectors_affinity+0xdc/0x150 pcie_port_device_register+0x2b8/0x4e0 pcie_portdrv_probe+0x34/0xf0 Notice that this quirk also disables MSI (which may work, but hasn't been tested nor has a current use case), since currently there is no standard way to disable only MSI-X. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
| | * | PCI: Add ACS quirk for Amazon Annapurna Labs root portsAli Saidi2019-09-161-0/+20
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Amazon's Annapurna Labs root ports don't advertise an ACS capability, but they don't allow peer-to-peer transactions and do validate bus numbers through the SMMU. Additionally, it's not possible for one RP to pass traffic to another RP. Signed-off-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
| * | Merge branch 'pci/misc'Bjorn Helgaas2019-09-231-0/+14
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Use devm_add_action_or_reset() helper (Fuqian Huang) - Mark expected switch fall-through (Gustavo A. R. Silva) - Convert sysfs device attributes from __ATTR() to DEVICE_ATTR() (Kelsey Skunberg) - Convert sysfs file permissions from S_IRUSR etc to octal (Kelsey Skunberg) - Move SR-IOV sysfs functions to iov.c (Kelsey Skunberg) - Add pci_info_ratelimited() to ratelimit PCI messages separately (Krzysztof Wilczynski) - Fix "'static' not at beginning of declaration" warnings (Krzysztof Wilczynski) - Clean up resource_alignment parameter to not require static buffer (Logan Gunthorpe) - Add ACS quirk for iProc PAXB (Abhinav Ratna) - Add pci_irq_vector() and other stubs for !CONFIG_PCI (Herbert Xu) * pci/misc: PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI PCI: Add ACS quirk for iProc PAXB PCI: Force trailing new line to resource_alignment_param in sysfs PCI: Move pci_[get|set]_resource_alignment_param() into their callers PCI: Clean up resource_alignment parameter to not require static buffer PCI: Use static const struct, not const static struct PCI: Add pci_info_ratelimited() to ratelimit PCI separately PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobe PCI/IOV: Move sysfs SR-IOV functions to iov.c PCI: sysfs: Change permissions from symbolic to octal PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO() PCI: sysfs: Define device attributes with DEVICE_ATTR*() PCI: Mark expected switch fall-through PCI: Use devm_add_action_or_reset()
| | * | PCI: Add ACS quirk for iProc PAXBAbhinav Ratna2019-09-051-0/+14
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iProc PAXB Root Ports don't advertise an ACS capability, but they do not allow peer-to-peer transactions between Root Ports. Add an ACS quirk so each Root Port can be in a separate IOMMU group. [bhelgaas: commit log, comment, use common implementation style] Link: https://lore.kernel.org/r/1566275985-25670-1-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com>
| * / PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski2019-08-281-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* / PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaroundLyude Paul2019-08-151-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around an apparent BIOS defect. It previously used pci_reset_function(), and the available method was a bus reset, which was fine because there was only one function on the bus. After b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), there are now two functions (the HDA controller and the GPU itself) on the bus, so the reset fails. Use pci_reset_bus() explicitly instead of pci_reset_function() since it's OK to reset both devices. [bhelgaas: commit log, add e0547c81bfcf] Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers") Fixes: e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary") Link: https://lore.kernel.org/r/20190801220117.14952-1-lyude@redhat.com Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Daniel Drake <drake@endlessm.com> Cc: Aaron Plattner <aplattner@nvidia.com> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Karol Herbst <kherbst@redhat.com> Cc: Maik Freudenberg <hhfeuer@gmx.de>
* PCI: Enable NVIDIA HDA controllersLukas Wunner2019-07-111-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many NVIDIA GPUs can be configured as either a single-function video device or a multi-function device with video at function 0 and an HDA audio controller at function 1. The HDA controller can be enabled or disabled by a bit in the function 0 config space. Some BIOSes leave the HDA disabled, which means the HDMI connector from the NVIDIA GPU may not work. Sometimes the BIOS enables the HDA if an HDMI cable is connected at boot time, but that doesn't handle hotplug cases. Enable the HDA controller on device enumeration and resume and re-read the header type, which tells us whether the GPU is a multi-function device. This quirk is limited to NVIDIA PCI devices with the VGA Controller device class. This is expected to correspond to product configurations where the NVIDIA GPU has connectors attached. Other products where the device class is 3D Controller are expected to correspond to configurations where the NVIDIA GPU is dedicated (dGPU) and has no connectors. See original post (URL below) for more details. This commit takes inspiration from an earlier patch by Daniel Drake. Link: https://lore.kernel.org/r/20190708051744.24039-1-drake@endlessm.com v2 Link: https://lore.kernel.org/r/20190613063514.15317-1-drake@endlessm.com v1 Link: https://devtalk.nvidia.com/default/topic/1024022 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75985 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Drake <drake@endlessm.com> [bhelgaas: commit log, log message, return early if already enabled] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Aaron Plattner <aplattner@nvidia.com> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Karol Herbst <kherbst@redhat.com> Cc: Maik Freudenberg <hhfeuer@gmx.de>
* PCI: Add NVIDIA GPU multi-function power dependenciesAbhishek Sahu2019-06-131-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NVIDIA Turing GPU is a multi-function PCI device with the following functions: - Function 0: VGA display controller - Function 1: Audio controller - Function 2: USB xHCI Host controller - Function 3: USB Type-C UCSI controller Function 0 is tightly coupled with other functions in the hardware. When function 0 is in D3, it gates power for hardware blocks used by other functions, which means those functions only work when function 0 is in D0. If any of these functions (1/2/3) are in D0, then function 0 should also be in D0. Commit 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") already creates a device link to show the dependency of function 1 on function 0 of this GPU. Create additional device links to express the dependencies of functions 2 and 3 on function 0. This means function 0 will be in D0 if any other function is in D0. [bhelgaas: I think the PCI spec expectation is that functions can be power-managed independently, so I don't think this device is technically compliant. For example, the PCIe r5.0 spec, sec 1.4, says "the PCI/PCIe hardware/software model includes architectural constructs necessary to discover, configure, and use a Function, without needing Function-specific knowledge" and sec 5.1 says "D states are associated with a particular Function" and "PM provides ... a mechanism to identify power management capabilities of a given Function [and] the ability to transition a Function into a certain power management state."] Link: https://lore.kernel.org/lkml/20190606092225.17960-3-abhsahu@nvidia.com Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Generalize multi-function power dependency device linksAbhishek Sahu2019-06-131-20/+34
| | | | | | | | | | | | | | | | | | | | | Although not allowed by the PCI specs, some multi-function devices have power dependencies between the functions. For example, function 1 may not work unless function 0 is in the D0 power state. The existing quirk_gpu_hda() adds a device link to express this dependency for GPU and HDA devices, but it really is not specific to those device types. Generalize it and rename it to pci_create_device_link() so we can create dependencies between any "consumer" and "producer" functions of a multi-function device, where the consumer is only functional if the producer is in D0. This reorganization should not affect any functionality. Link: https://lore.kernel.org/lkml/20190606092225.17960-2-abhsahu@nvidia.com Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com> [bhelgaas: commit log, reword diagnostic] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds2019-05-141-8/+84
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
| * Merge branch 'pci/printk'Bjorn Helgaas2019-05-131-8/+7
| |\ | | | | | | | | | | | | | | | | | | * pci/printk: PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 11:48:36 +0000