summaryrefslogtreecommitdiffstats
path: root/drivers/pci
Commit message (Collapse)AuthorAgeFilesLines
* PCI: qcom: Add support for tx term offset for rev 2.1.0Ansuel Smith2020-08-211-1/+16
| | | | | | | | | | | | | | | | | commit de3c4bf648975ea0b1d344d811e9b0748907b47c upstream. Add tx term offset support to pcie qcom driver need in some revision of the ipq806x SoC. Ipq8064 needs tx term offset set to 7. Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: qcom: Define some PARF params needed for ipq8064 SoCAnsuel Smith2020-08-211-0/+24
| | | | | | | | | | | | | | | | | | commit 5149901e9e6deca487c01cc434a3ac4125c7b00b upstream. Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization needed on some ipq8064 based device (Netgear R7800 for example). Without this the system locks on kernel load. Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Add device even if driver attach failedRajat Jain2020-08-211-5/+1
| | | | | | | | | | | | | | | | | | | | | | commit 2194bc7c39610be7cabe7456c5f63a570604f015 upstream. device_attach() returning failure indicates a driver error while trying to probe the device. In such a scenario, the PCI device should still be added in the system and be visible to the user. When device_attach() fails, merely warn about it and keep the PCI device in the system. This partially reverts ab1a187bba5c ("PCI: Check device_attach() return value always"). Link: https://lore.kernel.org/r/20200706233240.3245512-1-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Mark AMD Navi10 GPU rev 0x00 ATS as brokenKai-Heng Feng2020-08-211-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 45beb31d3afb651bb5c41897e46bd4fa9980c51c upstream. We are seeing AMD Radeon Pro W5700 doesn't work when IOMMU is enabled: iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0] iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01c0] The error also makes graphics driver fail to probe the device. It appears to be the same issue as commit 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") addresses, and indeed the same ATS quirk can workaround the issue. See-also: 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208725 Link: https://lore.kernel.org/r/20200728104554.28927-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI/ATS: Add pci_pri_supported() to check device or associated PFAshok Raj2020-08-211-0/+15
| | | | | | | | | | | | | | | | | | | | | | | commit 3f9a7a13fe4cb6e119e4e4745fbf975d30bfac9b upstream. For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and the PRI Capability is allowed for PFs but not for VFs. Searching for the PRI Capability on a VF always fails, even if its associated PF supports PRI. Add pci_pri_supported() to check whether device or its associated PF supports PRI. [bhelgaas: commit log, avoid "!!"] Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()Rafael J. Wysocki2020-08-211-3/+11
| | | | | | | | | | | | | | | | commit dae68d7fd4930315389117e9da35b763f12238f9 upstream. If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen. Fixes: edf5bf34d408 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts") Reported-by: Vasily Averin <vvs@virtuozzo.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* irqdomain/treewide: Free firmware node after domain removalJon Derrick2020-08-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream. Commit 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commit e3beca48a45b fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed. The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards. Add the missing free operations after domain removal where where appropriate. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Release IVRS table in AMD ACS quirkHanjun Guo2020-08-191-0/+2
| | | | | | | | | | | | | | | | [ Upstream commit 090688fa4e448284aaa16136372397d7d10814db ] The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping. In pci_quirk_amd_sb_acs(), IVRS table is just used for checking AMD IOMMU is supported, not used at runtime, so put the table after using it. Fixes: 15b100dfd1c9 ("PCI: Claim ACS support for AMD southbridge devices") Link: https://lore.kernel.org/r/1595411068-15440-1-git-send-email-guohanjun@huawei.com Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID registerKishon Vijay Abraham I2020-08-191-2/+7
| | | | | | | | | | | | | | | | | | [ Upstream commit e3bca37d15dca118f2ef1f0a068bb6e07846ea20 ] Commit 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller") in order to update Vendor ID, directly wrote to PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration space is read-only register and writing to it will have no effect. Use local management register to configure Vendor ID and Subsystem Vendor ID. Link: https://lore.kernel.org/r/20200722110317.4744-10-kishon@ti.com Fixes: 1b79c5284439 ("PCI: cadence: Add host driver for Cadence PCIe controller") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error pathKishon Vijay Abraham I2020-08-192-12/+3
| | | | | | | | | | | | | | | | | [ Upstream commit 19abcd790b51b26d775e1170ba2ac086823cceeb ] commit bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library") while refactoring the Cadence PCIe driver to be used as library, removed pm_runtime_get_sync() from cdns_pcie_ep_setup() and cdns_pcie_host_setup() but missed to remove the corresponding pm_runtime_put_sync() in the error path. Fix it here. Link: https://lore.kernel.org/r/20200722110317.4744-3-kishon@ti.com Fixes: bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/ASPM: Add missing newline in sysfs 'policy'Xiongfeng Wang2020-08-191-0/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 3167e3d340c092fd47924bc4d23117a3074ef9a9 ] When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline. [root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]# Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/1594972765-10404-1-git-send-email-wangxiongfeng2@huawei.com Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Fix pci_cfg_wait queue locking problemBjorn Helgaas2020-08-191-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2a7e32d0547f41c5ce244f84cf5d6ca7fccee7eb ] The pci_cfg_wait queue is used to prevent user-space config accesses to devices while they are recovering from reset. Previously we used these operations on pci_cfg_wait: __add_wait_queue(&pci_cfg_wait, ...) __remove_wait_queue(&pci_cfg_wait, ...) wake_up_all(&pci_cfg_wait) The wake_up acquires the wait queue lock, but the add and remove do not. Originally these were all protected by the pci_lock, but cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved wake_up_all() outside pci_lock, so it could race with add/remove operations, which caused occasional kernel panics, e.g., during vfio-pci hotplug/unplug testing: Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000 Resolve this by using wait_event() instead of __add_wait_queue() and __remove_wait_queue(). The wait queue lock is held by both wait_event() and wake_up_all(), so it provides mutual exclusion. Fixes: cdcb33f98244 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock") Link: https://lore.kernel.org/linux-pci/79827f2f-9b43-4411-1376-b9063b67aee3@huawei.com/T/#u Based-on: https://lore.kernel.org/linux-pci/20191210031527.40136-1-zhengxiang9@huawei.com/ Based-on-patch-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xiang Zheng <zhengxiang9@huawei.com> Cc: Heyi Guo <guoheyi@huawei.com> Cc: Biaoxiang Ye <yebiaoxiang@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: tegra: Revert tegra124 raw_violation_fixupNicolas Chauvet2020-08-111-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e7b856dfcec6d3bf028adee8c65342d7035914a1 upstream. As reported in https://bugzilla.kernel.org/206217 , raw_violation_fixup is causing more harm than good in some common use-cases. This patch is a partial revert of commit: 191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations") and fixes the following regression since then. * Description: When both the NIC and MMC are used one can see the following message: NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out and pcieport 0000:00:02.0: AER: Uncorrected (Non-Fatal) error received: 0000:01:00.0 r8169 0000:01:00.0: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) r8169 0000:01:00.0: AER: device [10ec:8168] error status/mask=00004000/00400000 r8169 0000:01:00.0: AER: [14] CmpltTO (First) r8169 0000:01:00.0: AER: can't recover (no error_detected callback) pcieport 0000:00:02.0: AER: device recovery failed After that, the ethernet NIC is not functional anymore even after reloading the r8169 module. After a reboot, this is reproducible by copying a large file over the NIC to the MMC. For some reason this is not reproducible when files are copied to a tmpfs. * Little background on the fixup, by Manikanta Maddireddy: "In the internal testing with dGPU on Tegra124, CmplTO is reported by dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module get full by upstream posted writes. Back to back upstream writes interleaved with infrequent reads, triggers RAW violation and CmpltTO. This is fixed by reducing the posted write credits and by changing updateFC timer frequency. These settings are fixed after stress test. In the current case, RTL NIC is also reporting CmplTO. These settings seems to be aggravating the issue instead of fixing it." Link: https://lore.kernel.org/r/20200718100710.15398-1-kwizart@gmail.com Fixes: 191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations") Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridgeRobert Hancock2020-08-051-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b361663c5a40c8bc758b7f7f2239f7a192180e7c upstream. Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e59e8a ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.com Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"Bjorn Helgaas2020-07-291-21/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d08c30d7a0d1826f771f16cde32bd86e48401791 ] This reverts commit ec411e02b7a2e785a4ed9ed283207cd14f48699d. Patrick reported that this commit broke hybrid graphics on a ThinkPad X1 Extreme 2nd with Intel UHD Graphics 630 and NVIDIA GeForce GTX 1650 Mobile: nouveau 0000:01:00.0: fifo: PBDMA0: 01000000 [] ch 0 [00ff992000 DRM] subc 0 mthd 0008 data 00000000 Karol reported that this commit broke Nouveau firmware loading on a Lenovo P1G2 with Intel UHD Graphics 630 and NVIDIA TU117GLM [Quadro T1000 Mobile]: nouveau 0000:01:00.0: acr: AHESASC binary failed In both cases, reverting ec411e02b7a2 solved the problem. Unfortunately, this revert will reintroduce the "Thunderbolt bridges take long time to resume from D3cold" problem: https://bugzilla.kernel.org/show_bug.cgi?id=206837 Link: https://lore.kernel.org/r/CAErSpo5sTeK_my1dEhWp7aHD0xOp87+oHYWkTjbL7ALgDbXo-Q@mail.gmail.com Link: https://lore.kernel.org/r/CACO55tsAEa5GXw5oeJPG=mcn+qxNvspXreJYWDJGZBy5v82JDA@mail.gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=208597 Reported-by: Patrick Volkerding <volkerdi@gmail.com> Reported-by: Karol Herbst <kherbst@redhat.com> Fixes: ec411e02b7a2 ("PCI/PM: Assume ports without DLL Link Active train links in 100 ms") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* irqdomain/treewide: Keep firmware node unconditionally allocatedThomas Gleixner2020-07-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ] Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/PM: Call .bridge_d3() hook only if non-NULLBjorn Helgaas2020-07-221-1/+3
| | | | | | | | | | | | | | | | | | | | commit c3aaf086701d05a82c8156ee8620af41e5a7d6fe upstream. 26ad34d510a8 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports") added the struct pci_platform_pm_ops.bridge_d3() function pointer and platform_pci_bridge_d3() to use it. The .bridge_d3() op is implemented by acpi_pci_platform_pm, but not by mid_pci_platform_pm. We don't expect platform_pci_bridge_d3() to be called on Intel MID platforms, but nothing in the code itself would prevent that. Check the .bridge_d3() pointer for NULL before calling it. Fixes: 26ad34d510a8 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up linkMarc Zyngier2020-06-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ] The vim3l board does not work with a standard PCIe switch (ASM1184e), spitting all kind of errors - hinting at HW misconfiguration (no link, port enumeration issues, etc). According to the the Synopsys DWC PCIe Reference Manual, in the section dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as: "Sets all internal timers to fast mode for simulation purposes." it is sound to set this bit from a simulation perspective, but on actual silicon, which expects timers to have a nominal value, it is not. Make sure the FAST_LINK_MODE bit is cleared when configuring the RC to solve this problem. Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Marc Zyngier <maz@kernel.org> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: dwc: Fix inner MSI IRQ domain registrationMarc Zyngier2020-06-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0414b93e78d87ecc24ae1a7e61fe97deb29fa2f4 ] On a system that uses the internal DWC MSI widget, I get this warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected: debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present! This is due to the fact that the DWC MSI code tries to register two IRQ domains for the same firmware node, without telling the low level code how to distinguish them (by setting a bus token). This further confuses debugfs which tries to create corresponding files for each domain. Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is the closest thing we have as to "generic MSI". Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()Wei Yongjun2020-06-241-5/+3
| | | | | | | | | | | | | | | [ Upstream commit c8a119779f5609de8dcd98630f71cc7f1b2e4e8c ] platform_get_resource() may fail and return NULL, so we had better check its return value to avoid a NULL pointer dereference a bit later in the code. Fix it to use devm_platform_ioremap_resource_byname() instead of calling platform_get_resource_byname() and devm_ioremap(). Link: https://lore.kernel.org/r/20200429015027.134485-1-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream PortBjorn Helgaas2020-06-241-5/+17
| | | | | | | | | | | | | | | | | | | [ Upstream commit 7b38fd9760f51cc83d80eed2cfbde8b5ead9e93a ] Except for Endpoints, we enable PTM at enumeration-time. Previously we did not account for the fact that Switch Downstream Ports are not permitted to have a PTM capability; their PTM behavior is controlled by the Upstream Port (PCIe r5.0, sec 7.9.16). Since Downstream Ports don't have a PTM capability, we did not mark them as "ptm_enabled", which meant that pci_enable_ptm() on an Endpoint failed because there was no PTM path to it. Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM enabled. Fixes: eec097d43100 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints") Reported-by: Aditya Paluri <Venkata.AdityaPaluri@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: aardvark: Issue PERST via GPIOPali Rohár2020-06-241-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 ] Add support for issuing PERST via GPIO specified in 'reset-gpios' property (as described in PCI device tree bindings). Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected after reboot when PERST is not issued during driver initialization. If bootloader already enabled link training then issuing PERST has no effect for some buggy cards (e.g. Compex WLE900VX) and these cards are not detected. We therefore clear the LINK_TRAINING_EN register before. It was observed that Compex WLE900VX card needs to be in PERST reset for at least 10ms if bootloader enabled link training. Tested on Turris MOX. Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: aardvark: Improve link trainingMarek Behún2020-06-241-25/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 43fc679ced18006b12d918d7a8a4af392b7fbfe7 ] Currently the aardvark driver trains link in PCIe gen2 mode. This may cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or even not detected. Moreover when ASPM code tries to retrain link second time, these cards may stop responding and link goes down. If gen1 is used this does not happen. Unconditionally forcing gen1 is not a good solution since it may have performance impact on gen2 cards. To overcome this, read 'max-link-speed' property (as defined in PCI device tree bindings) and use this as max gen mode. Then iteratively try link training at this mode or lower until successful. After successful link training choose final controller gen based on Negotiated Link Speed from Link Status register, which should match card speed. Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: aardvark: Train link immediately after enabling trainingPali Rohár2020-06-241-6/+9
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6964494582f56a3882c2c53b0edbfe99eb32b2e1 ] Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link training and starting link training causes detection issues with some buggy cards (such as Compex WLE900VX). Move the code which enables link training immediately before the one which starts link traning. This fixes detection issues of Compex WLE900VX card on Turris MOX after cold boot. Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...") Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/PM: Assume ports without DLL Link Active train links in 100 msMika Westerberg2020-06-241-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ec411e02b7a2e785a4ed9ed283207cd14f48699d ] Kai-Heng Feng reported that it takes a long time (> 1 s) to resume Thunderbolt-connected devices from both runtime suspend and system sleep (s2idle). This was because some Downstream Ports that support > 5 GT/s do not also support Data Link Layer Link Active reporting. Per PCIe r5.0 sec 6.6.1: With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3). Sec 7.5.3.6 requires such Ports to support DLL Link Active reporting, but at least the Intel JHL6240 Thunderbolt 3 Bridge [8086:15c0] and the Intel JHL7540 Thunderbolt 3 Bridge [8086:15ea] do not. Previously we tried to wait for Link training to complete, but since there was no DLL Link Active reporting, all we could do was wait the worst-case 1000 ms, then another 100 ms. Instead of using the supported speeds to determine whether to wait for Link training, check whether the port supports DLL Link Active reporting. The Ports in question do not, so we'll wait only the 100 ms required for Ports that support Link speeds <= 5 GT/s. This of course assumes these Ports always train the Link within 100 ms even if they are operating at > 5 GT/s, which is not required by the spec. [bhelgaas: commit log, comment] Link: https://bugzilla.kernel.org/show_bug.cgi?id=206837 Link: https://lore.kernel.org/r/20200514133043.27429-1-mika.westerberg@linux.intel.com Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Fix pci_register_host_bridge() device_register() error handlingRob Herring2020-06-241-2/+3
| | | | | | | | | | | | | | | [ Upstream commit 1b54ae8327a4d630111c8d88ba7906483ec6010b ] If device_register() has an error, we should bail out of pci_register_host_bridge() rather than continuing on. Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface") Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: brcmstb: Assert fundamental reset on initializationNicolas Saenz Julienne2020-06-241-0/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 22e21e51ce755399fd42055a3f668ee4af370881 ] While preparing the driver for upstream this detail was missed. If not asserted during the initialization process, devices connected on the bus will not be made aware of the internal reset happening. This, potentially resulting in unexpected behavior. Link: https://lore.kernel.org/r/20200507172020.18000-1-nsaenzjulienne@suse.de Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X BridgesKai-Heng Feng2020-06-241-10/+0
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 66ff14e59e8a30690755b08bc3042359703fb07a ] 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge. Remove this exclusion so we can enable ASPM on these links. The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings. [bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571 Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: rcar: Fix incorrect programming of OB windowsAndrew Murray2020-06-241-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2b9f217433e31d125fb697ca7974d3de3ecc3e92 ] The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between a CPU address (which is determined by the window number 'x') and a programmed PCI address - Thus allowing the controller to translate CPU accesses into PCI accesses. However the existing code incorrectly writes the CPU address - lets fix this by writing the PCI address instead. For memory transactions, existing DT users describe a 1:1 identity mapping and thus this change should have no effect. However the same isn't true for I/O. Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling pathsChristophe JAILLET2020-06-241-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit bca718988b9008d0d5f504e2d318178fc84958c1 ] If we fails somewhere in 'v3_pci_probe()', we need to free 'host'. Use the managed version of 'pci_alloc_host_bridge()' to do that easily. The use of managed resources is already widely used in this driver. Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.fr Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: vmd: Filter resource type bits from shadow registerJon Derrick2020-06-241-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3e5095eebe015d5a4d566aa5e03c8621add5f0a7 ] Versions of VMD with the Host Physical Address shadow register use this register to calculate the bus address offset needed to do guest passthrough of the domain. This register shadows the Host Physical Address registers including the resource type bits. After calculating the offset, the extra resource type bits lead to the VMD resources being over-provisioned at the front and under-provisioned at the back. Example: pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit] Expected: pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit] If other devices are mapped in the over-provisioned front, it could lead to resource conflict issues with VMD or those devices. Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com Fixes: a1a30170138c9 ("PCI: vmd: Fix shadow offsets to reflect spec changes") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: pci-bridge-emul: Fix PCIe bit conflictsJon Derrick2020-06-241-3/+3
| | | | | | | | | | | | | | | | | | | | [ Upstream commit c88d19181771bd189147681ef38fc1533ebeff4c ] This patch fixes two bit conflicts in the pci-bridge-emul driver: 1. Bit 3 of Device Status (19 of Device Control) is marked as both Write-1-to-Clear and Read-Only. It should be Write-1-to-Clear. The Read-Only and Reserved bitmasks are shifted by 1 bit due to this error. 2. Bit 12 of Slot Control is marked as both Read-Write and Reserved. It should be Read-Write. Link: https://lore.kernel.org/r/20200511162117.6674-2-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only ↵Pali Rohár2020-06-241-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | register [ Upstream commit 90c6cb4a355e7befcb557d217d1d8b8bd5875a05 ] Trying to change Link Status register does not have any effect as this is a read-only register. Trying to overwrite bits for Negotiated Link Width does not make sense. In future proper change of link width can be done via Lane Count Select bits in PCIe Control 0 register. Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link Control register is wrong. There should be at least some detection if endpoint supports L0s as isn't mandatory. Moreover ASPM Control bits in Link Control register are controlled by pcie/aspm.c code which sets it according to system ASPM settings, immediately after aardvark driver probes. So setting these bits by aardvark driver has no long running effect. Remove code which touches ASPM L0s bits from this driver and let kernel's ASPM implementation to set ASPM state properly. Some users are reporting issues that this code is problematic for some Intel wifi cards and removing it fixes them, see e.g.: https://bugzilla.kernel.org/show_bug.cgi?id=196339 If problems with Intel wifi cards occur even after this commit, then pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state for affected problematic cards. Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: brcmstb: Fix window register offset from 4 to 8Jim Quinlan2020-06-241-2/+2
| | | | | | | | | | | | | | | | [ Upstream commit 077a4fa92a615a4d0f86eae68d777b9dd5e5a95b ] The outbound memory window registers were being referenced with an incorrect stride offset. This probably wasn't noticed previously as there was likely only one such window employed. Link: https://lore.kernel.org/r/20200507201544.43432-3-james.quinlan@broadcom.com Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Jim Quinlan <jquinlan@broadcom.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: endpoint: functions/pci-epf-test: Fix DMA channel releaseKunihiko Hayashi2020-06-241-0/+3
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 0e86d981f9b7252e9716c5137cd8e4d9ad8ef32f ] When unbinding pci_epf_test, pci_epf_test_clean_dma_chan() is called in pci_epf_test_unbind() even though epf_test->dma_supported is false. As a result, dma_release_channel() will trigger a NULL pointer dereference because dma_chan is not set. Avoid calling dma_release_channel() if epf_test->dma_supported is false. Link: https://lore.kernel.org/r/1587540287-10458-1-git-send-email-hayashi.kunihiko@socionext.com Fixes: 5ebf3fc59bd2 ("PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Allow pci_resize_resource() for devices on root busArd Biesheuvel2020-06-241-4/+5
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d09ddd8190fbdc07696bf34b548ae15aa1816714 ] When resizing a BAR, pci_reassign_bridge_resources() is invoked to bring the bridge windows of parent bridges in line with the new BAR assignment. This assumes the device whose BAR is being resized lives on a subordinate bus, but this is not necessarily the case. A device may live on the root bus, in which case dev->bus->self is NULL, and passing a NULL pci_dev pointer to pci_reassign_bridge_resources() will cause it to crash. So let's make the call to pci_reassign_bridge_resources() conditional on whether dev->bus->self is non-NULL in the first place. Fixes: 8bb705e3e79d84e7 ("PCI: Add pci_resize_resource() for resizing BARs") Link: https://lore.kernel.org/r/20200421162256.26887-1-ardb@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Program MPS for RCiEP devicesAshok Raj2020-06-221-1/+21
| | | | | | | | | | | | | | | | | | | | | | commit aa0ce96d72dd2e1b0dfd0fb868f82876e7790878 upstream. Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge, so pci_configure_mps() previously ignored them, which may result in reduced performance. Instead, program the Max_Payload_Size of RCiEPs to the maximum supported value (unless it is limited for the PCIE_BUS_PEER2PEER case). This also affects the subsequent programming of Max_Read_Request_Size because Linux programs MRRS based on the MPS value. Fixes: 9dae3a97297f ("PCI: Move MPS configuration check to pci_configure_device()") Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.com Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Add ACS quirk for Intel Root Complex Integrated EndpointsAshok Raj2020-06-221-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3247bd10a4502a3075ce8e1c3c7d31ef76f193ce ] All Intel platforms guarantee that all root complex implementations must send transactions up to IOMMU for address translations. Hence for Intel RCiEP devices, we can assume some ACS-type isolation even without an ACS capability. From the Intel VT-d spec, r3.1, sec 3.16 ("Root-Complex Peer to Peer Considerations"): When DMA remapping is enabled, peer-to-peer requests through the Root-Complex must be handled as follows: - The input address in the request is translated (through first-level, second-level or nested translation) to a host physical address (HPA). The address decoding for peer addresses must be done only on the translated HPA. Hardware implementations are free to further limit peer-to-peer accesses to specific host physical address regions (or to completely disallow peer-forwarding of translated requests). - Since address translation changes the contents (address field) of the PCI Express Transaction Layer Packet (TLP), for PCI Express peer-to-peer requests with ECRC, the Root-Complex hardware must use the new ECRC (re-computed with the translated address) if it decides to forward the TLP as a peer request. - Root-ports, and multi-function root-complex integrated endpoints, may support additional peer-to-peer control features by supporting PCI Express Access Control Services (ACS) capability. Refer to ACS capability in PCI Express specifications for details. Since Linux didn't give special treatment to allow this exception, certain RCiEP MFD devices were grouped in a single IOMMU group. This doesn't permit a single device to be assigned to a guest for instance. In one vendor system: Device 14.x were grouped in a single IOMMU group. /sys/kernel/iommu_groups/5/devices/0000:00:14.0 /sys/kernel/iommu_groups/5/devices/0000:00:14.2 /sys/kernel/iommu_groups/5/devices/0000:00:14.3 After this patch: /sys/kernel/iommu_groups/5/devices/0000:00:14.0 /sys/kernel/iommu_groups/5/devices/0000:00:14.2 /sys/kernel/iommu_groups/6/devices/0000:00:14.3 <<< new group 14.0 and 14.2 are integrated devices, but legacy end points, whereas 14.3 was a PCIe-compliant RCiEP. 00:14.3 Network controller: Intel Corporation Device 9df0 (rev 30) Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 This permits assigning this device to a guest VM. [bhelgaas: drop "Fixes" tag since this doesn't fix a bug in that commit] Link: https://lore.kernel.org/r/1590699462-7131-1-git-send-email-ashok.raj@intel.com Tested-by: Darrel Goeddel <dgoeddel@forcepoint.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Mark Scott <mscott@forcepoint.com>, Cc: Romil Sharma <rsharma@forcepoint.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Avoid FLR for AMD Starship USB 3.0Kevin Buettner2020-06-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5727043c73fdfe04597971b5f3f4850d879c1f4f ] The AMD Starship USB 3.0 host controller advertises Function Level Reset support, but it apparently doesn't work. Add a quirk to prevent use of FLR on this device. Without this quirk, when attempting to assign (pass through) an AMD Starship USB 3.0 host controller to a guest OS, the system becomes increasingly unresponsive over the course of several minutes, eventually requiring a hard reset. Shortly after attempting to start the guest, I see these messages: vfio-pci 0000:05:00.3: not ready 1023ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 2047ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 4095ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 8191ms after FLR; waiting And then eventually: vfio-pci 0000:05:00.3: not ready 65535ms after FLR; giving up INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.000 msecs perf: interrupt took too long (642744 > 2500), lowering kernel.perf_event_max_sample_rate to 1000 INFO: NMI handler (perf_event_nmi_handler) took too long to run: 82.270 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 680.608 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 100.952 msecs ... watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [qemu-system-x86:7487] Tested on a Micro-Star International Co., Ltd. MS-7C59/Creator TRX40 motherboard with an AMD Ryzen Threadripper 3970X. Link: https://lore.kernel.org/r/20200524003529.598434ff@f31-4.lan Signed-off-by: Kevin Buettner <kevinb@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0Marcos Scriven2020-06-221-4/+14
| | | | | | | | | | | | | | | | | | | [ Upstream commit 0d14f06cd6657ba3446a5eb780672da487b068e7 ] The AMD Matisse HD Audio & USB 3.0 devices advertise Function Level Reset support, but hang when an FLR is triggered. To reproduce the problem, attach the device to a VM, then detach and try to attach again. Rename the existing quirk_intel_no_flr(), which was not Intel-specific, to quirk_no_flr(), and apply it to prevent the use of FLR on these AMD devices. Link: https://lore.kernel.org/r/CAAri2DpkcuQZYbT6XsALhx2e6vRqPHwtbjHYeiH7MNp4zmt1RA@mail.gmail.com Signed-off-by: Marcos Scriven <marcos@scriven.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Avoid Pericom USB controller OHCI/EHCI PME# defectKai-Heng Feng2020-06-221-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 68f5fc4ea9ddf9f77720d568144219c4e6452cde ] Both Pericom OHCI and EHCI devices advertise PME# support from all power states: 06:00.0 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] (rev 01) (prog-if 10 [OHCI]) Subsystem: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 06:00.2 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] (rev 01) (prog-if 20 [EHCI]) Subsystem: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) But testing shows that it's unreliable: there is a 20% chance PME# won't be asserted when a USB device is plugged. Remove PME support for both devices to make USB plugging work reliably. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205981 Link: https://lore.kernel.org/r/20200508065343.32751-2-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Don't disable decoding when mmio_always_on is setJiaxun Yang2020-06-221-1/+1
| | | | | | | | | | | | | | | [ Upstream commit b6caa1d8c80cb71b6162cb1f1ec13aa655026c9f ] Don't disable MEM/IO decoding when a device have both non_compliant_bars and mmio_always_on. That would allow us quirk devices with junk in BARs but can't disable their decoding. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI/PM: Adjust pcie_wait_for_link_delay() for caller delayBjorn Helgaas2020-06-171-2/+2
| | | | | | | | | | | | | | | | [ Upstream commit f044baaff1eb7ae5aa7a36f1b7ad5bd8eeb672c4 ] The caller of pcie_wait_for_link_delay() specifies the time to wait after the link becomes active. When the downstream port doesn't support link active reporting, obviously we can't tell when the link becomes active, so we waited the worst-case time (1000 ms) plus 100 ms, ignoring the delay from the caller. Instead, wait for 1000 ms + the delay from the caller. Fixes: 4827d63891b6 ("PCI/PM: Add pcie_wait_for_link_delay()") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PCI: Move Apex Edge TPU class quirk to fix BAR assignmentBjorn Helgaas2020-04-141-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Debugged-by: Luís Mendes <luis.p.mendes@gmail.com> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com>
* Merge tag 'iommu-updates-v5.7' of ↵Linus Torvalds2020-04-081-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM-SMMU support for the TLB range invalidation command in SMMUv3.2 - ARM-SMMU introduction of command batching helpers to batch up CD and ATC invalidation - ARM-SMMU support for PCI PASID, along with necessary PCI symbol exports - Introduce a generic (actually rename an existing) IOMMU related pointer in struct device and reduce the IOMMU related pointers - Some fixes for the OMAP IOMMU driver to make it build on 64bit architectures - Various smaller fixes and improvements * tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits) iommu: Move fwspec->iommu_priv to struct dev_iommu iommu/virtio: Use accessor functions for iommu private data iommu/qcom: Use accessor functions for iommu private data iommu/mediatek: Use accessor functions for iommu private data iommu/renesas: Use accessor functions for iommu private data iommu/arm-smmu: Use accessor functions for iommu private data iommu/arm-smmu: Refactor master_cfg/fwspec usage iommu/arm-smmu-v3: Use accessor functions for iommu private data iommu: Introduce accessors for iommu private data iommu/arm-smmu: Fix uninitilized variable warning iommu: Move iommu_fwspec to struct dev_iommu iommu: Rename struct iommu_param to dev_iommu iommu/tegra-gart: Remove direct access of dev->iommu_fwspec drm/msm/mdp5: Remove direct access of dev->iommu_fwspec ACPI/IORT: Remove direct access of dev->iommu_fwspec iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE iommu/virtio: Fix freeing of incomplete domains iommu/virtio: Fix sparse warning iommu/vt-d: Add build dependency on IOASID ...
| *-. Merge branches 'iommu/fixes', 'arm/qcom', 'arm/omap', 'arm/smmu', 'x86/amd', ↵Joerg Roedel2020-03-271-0/+4
| |\ \ | | | | | | | | | | | | 'x86/vt-d', 'virtio' and 'core' into next
| | | * PCI/ATS: Export symbols of PASID functionsJean-Philippe Brucker2020-03-181-0/+4
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | The Arm SMMUv3 driver uses pci_{enable,disable}_pasid() and related functions. Export them to allow the driver to be built as a module. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
* | | Merge tag 'powerpc-5.7-1' of ↵Linus Torvalds2020-04-053-4/+7
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...
| * | | powerpc/eeh: Make early EEH init pseries specificOliver O'Halloran2020-03-253-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eeh_ops->probe() function is called from two different contexts: 1. On pseries, where we set EEH_PROBE_MODE_DEVTREE, it's called in eeh_add_device_early() which is supposed to run before we create a pci_dev. 2. On PowerNV, where we set EEH_PROBE_MODE_DEV, it's called in eeh_device_add_late() which is supposed to run *after* the pci_dev is created. The "early" probe is required because PAPR requires that we perform an RTAS call to enable EEH support on a device before we start interacting with it via config space or MMIO. This requirement doesn't exist on PowerNV and shoehorning two completely separate initialisation paths into a common interface just results in a convoluted code everywhere. Additionally the early probe requires the probe function to take an pci_dn rather than a pci_dev argument. We'd like to make pci_dn a pseries specific data structure since there's no real requirement for them on PowerNV. To help both goals move the early probe into the pseries containment zone so the platform depedence is more explicit. Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200306073904.4737-5-oohall@gmail.com
| * | | powerpc/eeh: Do early EEH init only when requiredOliver O'Halloran2020-03-252-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pci hotplug helper (pci_hp_add_devices()) calls eeh_add_device_tree_early() to scan the device-tree for new PCI devices and do the early EEH probe before the device is scanned. This early probe is a no-op in a lot of cases because: a) The early init is only required to satisfy a PAPR requirement that EEH be configured before we start doing config accesses. On PowerNV it is a no-op. b) It's a no-op for devices that have already had their eeh_dev initialised. There are four callers of pci_hp_add_devices(): 1. arch/powerpc/kernel/eeh_driver.c Here the hotplug helper is called when re-scanning pci_devs that were removed during an EEH recovery pass. The EEH stat for each removed device (the eeh_dev) is retained across a recovery pass so the early init is a no-op in this case. 2. drivers/pci/hotplug/pnv_php.c This is also a no-op since the PowerNV hotplug driver is, suprisingly, PowerNV specific. 3. drivers/pci/hotplug/rpaphp_core.c 4. drivers/pci/hotplug/rpaphp_pci.c In these two cases new devices have been hotplugged and FW has provided new DT nodes for each. These are the only two cases where the EEH we might have new PCI device nodes in the DT so these are the only two cases where the early EEH probe needs to be done. We can move the calls to eeh_add_device_tree_early() to the locations where it's needed and remove it from the generic path. This is preparation for making the early EEH probe pseries specific. Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200306073904.4737-3-oohall@gmail.com
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-23 08:53:02 +0000