summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
Commit message (Collapse)AuthorAgeFilesLines
* scsi: libsas: initialize sas_phy status according to response of DISCOVERchenxiang2018-04-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: libsas: fix error when getting phy eventsJason Yan2018-04-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ] The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: chenqilin <chenqilin2@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: libsas: fix memory leak in sas_smp_get_phy_events()Jason Yan2018-04-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: chenqilin <chenqilin2@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: libiscsi: Allow sd_shutdown on bad transportRafael David Tinoco2018-04-131-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ] If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()Maurizio Lombardi2018-04-132-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c2dd893a3b0772d1c680e109b9d5715d7f73022b ] If multiple tasks attempt to read the stats, it may happen that the start_req_done completion is re-initialized while still being used by another task, causing a list corruption. This patch fixes the bug by adding a mutex to serialize the calls to bnx2fc_get_host_stats(). WARNING: at lib/list_debug.c:48 list_del+0x6e/0xa0() (Not tainted) Hardware name: PowerEdge R820 list_del corruption. prev->next should be ffff882035627d90, but was ffff884069541588 Pid: 40267, comm: perl Not tainted 2.6.32-642.3.1.el6.x86_64 #1 Call Trace: [<ffffffff8107c691>] ? warn_slowpath_common+0x91/0xe0 [<ffffffff8107c796>] ? warn_slowpath_fmt+0x46/0x60 [<ffffffff812ad16e>] ? list_del+0x6e/0xa0 [<ffffffff81547eed>] ? wait_for_common+0x14d/0x180 [<ffffffff8106c4a0>] ? default_wake_function+0x0/0x20 [<ffffffff81547fd3>] ? wait_for_completion_timeout+0x13/0x20 [<ffffffffa05410b1>] ? bnx2fc_get_host_stats+0xa1/0x280 [bnx2fc] [<ffffffffa04cf630>] ? fc_stat_show+0x90/0xc0 [scsi_transport_fc] [<ffffffffa04cf8b6>] ? show_fcstat_tx_frames+0x16/0x20 [scsi_transport_fc] [<ffffffff8137c647>] ? dev_attr_show+0x27/0x50 [<ffffffff8113b9be>] ? __get_free_pages+0xe/0x50 [<ffffffff812170e1>] ? sysfs_read_file+0x111/0x200 [<ffffffff8119a305>] ? vfs_read+0xb5/0x1a0 [<ffffffff8119b0b6>] ? fget_light_pos+0x16/0x50 [<ffffffff8119a651>] ? sys_read+0x51/0xb0 [<ffffffff810ee1fe>] ? __audit_syscall_exit+0x25e/0x290 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: virtio_scsi: always read VPD pages for multiqueue tooPaolo Bonzini2018-04-081-0/+1
| | | | | | | | | | | | | | | | | | commit a680f1d463aeaeb00d22af257a56e111967c2f18 upstream. Multi-queue virtio-scsi uses a different scsi_host_template struct. Add the .device_alloc field there, too. Fixes: 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 Cc: stable@vger.kernel.org Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: don't return bogus Sg_requestsJohannes Thumshirn2018-04-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | commit 48ae8484e9fc324b4968d33c585e54bc98e44d61 upstream. If the list search in sg_get_rq_mark() fails to find a valid request, we return a bogus element. This then can later lead to a GPF in sg_remove_scat(). So don't return bogus Sg_requests in sg_get_rq_mark() but NULL in case the list search doesn't find a valid request. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Doug Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Doug Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: mac_esp: Replace bogus memory barrier with spinlockFinn Thain2018-03-241-10/+23
| | | | | | | | | | | | | | | | | | [ Upstream commit 4da2b1eb230ba4ad19b58984dc52e05b1073df5f ] Commit da244654c66e ("[SCSI] mac_esp: fix for quadras with two esp chips") added mac_scsi_esp_intr() to handle the IRQ lines from a pair of on-board ESP chips (a normal shared IRQ did not work). Proper mutual exclusion was missing from that patch. This patch fixes race conditions between comparison and assignment of esp_chips[] pointers. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Fix driver usage of 128B WQEs when WQ_CREATE is V1.James Smart2018-03-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3f247de750b8dd8f50a2c1390e2a1238790a9dff ] There are two versions of a structure for queue creation and setup that the driver shares with FW. The driver was only treating as version 0. Verify WQ_CREATE with 128B WQEs in V0 and V1. Code review of another bug showed the driver passing 128B WQEs and 8 pages in WQ CREATE and V0. Code inspection/instrumentation showed that the driver uses V0 in WQ_CREATE and if the caller passes queue->entry_size 128B, the driver sets the hdr_version to V1 so all is good. When I tested the V1 WQ_CREATE, the mailbox failed causing the driver to unload. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: virtio_scsi: Always try to read VPD pagesDavid Gibson2018-03-241-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 ] Passed through SCSI targets may have transfer limits which come from the host SCSI controller or something on the host side other than the target itself. To make this work properly, the hypervisor can adjust the target's VPD information to advertise these limits. But for that to work, the guest has to look at the VPD pages, which we won't do by default if it is an SPC-2 device, even if it does actually support it. This adds a workaround to address this, forcing devices attached to a virtio-scsi controller to always check the VPD pages. This is modelled on a similar workaround for the storvsc (Hyper-V) SCSI controller, although that exists for slightly different reasons. A specific case which causes this is a volume from IBM's IPR RAID controller (which presents as an SPC-2 device, although it does support VPD) passed through with qemu's 'scsi-block' device. [mkp: fixed typo] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: only check for dxfer_len greater than 256MJohannes Thumshirn2018-03-221-30/+2
| | | | | | | | | | | | | | | | | | | | | commit f930c7043663188429cd9b254e9d761edfc101ce upstream. Don't make any assumptions on the sg_io_hdr_t::dxfer_direction or the sg_io_hdr_t::dxferp in order to determine if it is a valid request. The only way we can check for bad requests is by checking if the length exceeds 256M. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Fixes: 28676d869bbb (scsi: sg: check for valid direction before starting the request) Reported-by: Jason L Tibbitts III <tibbs@math.uh.edu> Tested-by: Jason L Tibbitts III <tibbs@math.uh.edu> Suggested-by: Doug Gilbert <dgilbert@interlog.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: <stable@vger.kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: fix static checker warning in sg_is_valid_dxferJohannes Thumshirn2018-03-221-2/+5
| | | | | | | | | | | | | | | | | | | | commit 14074aba4bcda3764c9a702b276308b89901d5b6 upstream. dxfer_len is an unsigned int and we always assign a value > 0 to it, so it doesn't make any sense to check if it is < 0. We can't really check dxferp as well as we have both NULL and not NULL cases in the possible call paths. So just return true for SG_DXFER_FROM_DEV transfer in sg_is_valid_dxfer(). Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Colin Ian King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: fix SG_DXFER_FROM_DEV transfersJohannes Thumshirn2018-03-221-1/+4
| | | | | | | | | | | | | | | | | | | | | | | commit 68c59fcea1f2c6a54c62aa896cc623c1b5bc9b47 upstream. SG_DXFER_FROM_DEV transfers do not necessarily have a dxferp as we set it to NULL for the old sg_io read/write interface, but must have a length bigger than 0. This fixes a regression introduced by commit 28676d869bbb ("scsi: sg: check for valid direction before starting the request") Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Fixes: 28676d869bbb ("scsi: sg: check for valid direction before starting the request") Reported-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Cristian Crinteanu <crinteanu.cristian@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: devinfo: apply to HP XP the same flags as Hitachi VSPXose Vazquez Perez2018-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b369a0471503130cfc74f9f62071db97f48948c3 ] Commit 56f3d383f37b ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entry") modified some Hitachi entries: HITACHI is always supporting VPD pages, even though it's claiming to support SCSI Revision 3 only. The same should have been done also for HP-rebranded. [mkp: checkpatch and tweaked commit message] Cc: Hannes Reinecke <hare@suse.de> Cc: Takahiro Yasui <takahiro.yasui@hds.com> Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: close race condition in sg_remove_sfp_usercontext()Hannes Reinecke2018-03-221-2/+10
| | | | | | | | | | | | | | | | [ Upstream commit 97d27b0dd015e980ade63fda111fd1353276e28b ] sg_remove_sfp_usercontext() is clearing any sg requests, but needs to take 'rq_list_lock' when modifying the list. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: check for valid direction before starting the requestJohannes Thumshirn2018-03-221-12/+34
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 28676d869bbb5257b5f14c0c95ad3af3a7019dd5 ] Check for a valid direction before starting the request, otherwise we risk running into an assertion in the scsi midlayer checking for valid requests. [mkp: fixed typo] Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Link: http://www.spinics.net/lists/linux-scsi/msg104400.html Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: ipr: Fix missed EH wakeupBrian King2018-03-221-4/+12
| | | | | | | | | | | | | | | | | [ Upstream commit 66a0d59cdd12546ddf01d229de28b07ccf6d637f ] Following a command abort or device reset, ipr's EH handlers wait for the commands getting aborted to get sent back from the adapter prior to returning from the EH handler. This fixes up some cases where the completion handler was not getting called, which would have resulted in the EH thread waiting until it timed out, greatly extending EH time. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com> Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTShimanshu.madhani@cavium.com2018-03-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1514839b366417934e2f1328edb50ed1e8a719f5 upstream. This patch fixes NULL pointer crash due to active timer running for abort IOCB. From crash dump analysis it was discoverd that get_next_timer_interrupt() encountered a corrupted entry on the timer list. #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8 [exception RIP: get_next_timer_interrupt+440] RIP: ffffffff90ea3088 RSP: ffff95e1f6f0fdf0 RFLAGS: 00010013 RAX: ffff95e1f6451028 RBX: 000218e2389e5f40 RCX: 00000001232ad600 RDX: 0000000000000001 RSI: ffff95e1f6f0fdf0 RDI: 0000000001232ad6 RBP: ffff95e1f6f0fe40 R8: ffff95e1f6451188 R9: 0000000000000001 R10: 0000000000000016 R11: 0000000000000016 R12: 00000001232ad5f6 R13: ffff95e1f6450000 R14: ffff95e1f6f0fdf8 R15: ffff95e1f6f0fe10 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Looking at the assembly of get_next_timer_interrupt(), address came from %r8 (ffff95e1f6451188) which is pointing to list_head with single entry at ffff95e5ff621178. 0xffffffff90ea307a <get_next_timer_interrupt+426>: mov (%r8),%rdx 0xffffffff90ea307d <get_next_timer_interrupt+429>: cmp %r8,%rdx 0xffffffff90ea3080 <get_next_timer_interrupt+432>: je 0xffffffff90ea30a7 <get_next_timer_interrupt+471> 0xffffffff90ea3082 <get_next_timer_interrupt+434>: nopw 0x0(%rax,%rax,1) 0xffffffff90ea3088 <get_next_timer_interrupt+440>: testb $0x1,0x18(%rdx) crash> rd ffff95e1f6451188 10 ffff95e1f6451188: ffff95e5ff621178 ffff95e5ff621178 x.b.....x.b..... ffff95e1f6451198: ffff95e1f6451198 ffff95e1f6451198 ..E.......E..... ffff95e1f64511a8: ffff95e1f64511a8 ffff95e1f64511a8 ..E.......E..... ffff95e1f64511b8: ffff95e77cf509a0 ffff95e77cf509a0 ...|.......|.... ffff95e1f64511c8: ffff95e1f64511c8 ffff95e1f64511c8 ..E.......E..... crash> rd ffff95e5ff621178 10 ffff95e5ff621178: 0000000000000001 ffff95e15936aa00 ..........6Y.... ffff95e5ff621188: 0000000000000000 00000000ffffffff ................ ffff95e5ff621198: 00000000000000a0 0000000000000010 ................ ffff95e5ff6211a8: ffff95e5ff621198 000000000000000c ..b............. ffff95e5ff6211b8: 00000f5800000000 ffff95e751f8d720 ....X... ..Q.... ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080. CACHE NAME OBJSIZE ALLOCATED TOTAL SLABS SSIZE ffff95dc7fd74d00 mnt_cache 384 19785 24948 594 16k SLAB MEMORY NODE TOTAL ALLOCATED FREE ffffdc5dabfd8800 ffff95e5ff620000 1 42 29 13 FREE / [ALLOCATED] ffff95e5ff621080 (cpu 6 cache) Examining the contents of that memory reveals a pointer to a constant string in the driver, "abort\0", which is set by qla24xx_async_abort_cmd(). crash> rd ffffffffc059277c 20 ffffffffc059277c: 6e490074726f6261 0074707572726574 abort.Interrupt. ffffffffc059278c: 00676e696c6c6f50 6920726576697244 Polling.Driver i ffffffffc059279c: 646f6d207325206e 6974736554000a65 n %s mode..Testi ffffffffc05927ac: 636976656420676e 786c252074612065 ng device at %lx ffffffffc05927bc: 6b63656843000a2e 646f727020676e69 ...Checking prod ffffffffc05927cc: 6f20444920746375 0a2e706968632066 uct ID of chip.. ffffffffc05927dc: 5120646e756f4600 204130303232414c .Found QLA2200A ffffffffc05927ec: 43000a2e70696843 20676e696b636568 Chip...Checking ffffffffc05927fc: 65786f626c69616d 6c636e69000a2e73 mailboxes...incl ffffffffc059280c: 756e696c2f656475 616d2d616d642f78 ude/linux/dma-ma crash> struct -ox srb_iocb struct srb_iocb { union { struct {...} logio; struct {...} els_logo; struct {...} tmf; struct {...} fxiocb; struct {...} abt; struct ct_arg ctarg; struct {...} mbx; struct {...} nack; [0x0 ] } u; [0xb8] struct timer_list timer; [0x108] void (*timeout)(void *); } SIZE: 0x110 crash> ! bc ibase=16 obase=10 B8+40 F8 The object is a srb_t, and at offset 0xf8 within that structure (i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list. Cc: <stable@vger.kernel.org> #4.4+ Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.") Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_errorCathy Avery2018-03-031-1/+2
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit d1b8b2391c24751e44f618fcf86fb55d9a9247fd ] When an I/O is returned with an srb_status of SRB_STATUS_INVALID_LUN which has zero good_bytes it must be assigned an error. Otherwise the I/O will be continuously requeued and will cause a deadlock in the case where disks are being hot added and removed. sd_probe_async will wait forever for its I/O to complete while holding scsi_sd_probe_domain. Also returning the default error of DID_TARGET_FAILURE causes multipath to not retry the I/O resulting in applications receiving I/O errors before a failover can occur. Signed-off-by: Cathy Avery <cavery@redhat.com> Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_infoTyrel Datwyler2018-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit c39813652700f3df552b6557530f1e5f782dbe2f upstream. The fcp_rsp_info structure as defined in the FC spec has an initial 3 bytes reserved field. The ibmvfc driver mistakenly defined this field as 4 bytes resulting in the rsp_code field being defined in what should be the start of the second reserved field and thus always being reported as zero by the driver. Ideally, we should wire ibmvfc up with libfc for the sake of code deduplication, and ease of maintaining standardized structures in a single place. However, for now simply fixup the definition in ibmvfc for backporting to distros on older kernels. Wiring up with libfc will be done in a followup patch. Cc: <stable@vger.kernel.org> Reported-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vregGustavo A. R. Silva2018-02-071-2/+5
| | | | | | | | | | | | | | | | | | | [ Upstream commit 727535903bea924c4f73abb202c4b3e85fff0ca4 ] _vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa4976130934 ("ufs: Add regulator enable support") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: libiscsi: fix shifting of DID_REQUEUE host byteJohannes Thumshirn2018-01-311-1/+1
| | | | | | | | | | | | | | | | | | | commit eef9ffdf9cd39b2986367bc8395e2772bc1284ba upstream. The SCSI host byte should be shifted left by 16 in order to have scsi_decide_disposition() do the right thing (.i.e. requeue the command). Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Fixes: 661134ad3765 ("[SCSI] libiscsi, bnx2i: make bound ep check common") Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Cc: Chris Leech <cleech@redhat.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: disable SET_FORCE_LOW_DMAHannes Reinecke2018-01-311-21/+9
| | | | | | | | | | | | | | | | commit 745dfa0d8ec26b24f3304459ff6e9eacc5c8351b upstream. The ioctl SET_FORCE_LOW_DMA has never worked since the initial git check-in, and the respective setting is nowadays handled correctly. So disable it entirely. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: PLOGI failures during NPIV testingDick Kennedy2017-12-251-1/+2
| | | | | | | | | | | | | | | | | | [ Upstream commit e8bcf0ae4c0346fdc78ebefe0eefcaa6a6622d38 ] Local Reject/Invalid RPI errors seen during discovery. Temporary RPI cleanup was occurring regardless of SLI rev. It's only necessary on SLI-4. Adjust the test for whether cleanup is necessary. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: Fix secure firmware updatesDick Kennedy2017-12-251-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 184fc2b9a8bcbda9c14d0a1e7fbecfc028c7702e ] Firmware update fails with: status x17 add_status x56 on the final write If multiple DMA buffers are used for the download, some firmware revs have difficulty with signatures and crcs split across the dma buffer boundaries. Resolve by making all writes be a single 4k page in length. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: cxgb4i: fix Tx skb leakVarun Prakash2017-12-251-0/+1
| | | | | | | | | | | | | [ Upstream commit 9b3a081fb62158b50bcc90522ca2423017544367 ] In case of connection reset Tx skb queue can have some skbs which are not transmitted so purge Tx skb queue in release_offload_resources() to avoid skb leak. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: Fix PT2PT PRLI rejectDick Kennedy2017-12-251-1/+2
| | | | | | | | | | | | | | | | | | [ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ] lpfc cannot establish connection with targets that send PRLI in P2P configurations. If lpfc rejects a PRLI that is sent from a target the target will not resend and will reject the PRLI send from the initiator. [mkp: applied by hand] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: bfa: integer overflow in debugfsDan Carpenter2017-12-201-2/+3
| | | | | | | | | | | | | | | | | | [ Upstream commit 3e351275655d3c84dc28abf170def9786db5176d ] We could allocate less memory than intended because we do: bfad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. I fixed the network version of this in March with commit 13e2d5187f6b ("bna: integer overflow bug in debugfs"). Fixes: ab2a9ba189e8 ("[SCSI] bfa: add debugfs support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entryKurt Garloff2017-12-201-1/+1
| | | | | | | | | | | | | [ Upstream commit 909cf3e16a5274fe2127cf3cea5c8dba77b2c412 ] All EMC SYMMETRIX support REPORT_LUNS, even if configured to report SCSI-2 for whatever reason. Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adaptersJames Smart2017-12-161-4/+10
| | | | | | | | | | | | | [ Upstream commit 5d181531bc6169e19a02a27d202cf0e982db9d0e ] if REG_VPI fails, the driver was incorrectly issuing INIT_VFI (a SLI4 command) on a SLI3 adapter. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: Correct issue leading to oops during link resetJames Smart2017-11-211-0/+1
| | | | | | | | | | | | | | | [ Upstream commit e6c6acc0e0223ddaf867628d420ee196349c6fae ] Correct issue leading to oops during link reset. Missing vport pointer. [mkp: fixed typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: Correct host name in symbolic_name fieldJames Smart2017-11-211-0/+17
| | | | | | | | | | | | | [ Upstream commit 6c9231f604c2575be24c96d38deb70f145172f92 ] Correct host name in symbolic_name field of nameserver registrations Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: FCoE VPort enable-disable does not bring up the VPortJames Smart2017-11-211-0/+8
| | | | | | | | | | | | | | [ Upstream commit 104450eb08ca662e6b1d02da11aca9598e978f3e ] FCoE VPort enable-disable does not bring up the VPort. VPI structure needed to be initialized before being re-registered. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: lpfc: Add missing memory barrierJames Smart2017-11-211-0/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit 6b3b3bdb83b4ad51252d21bb13596db879e51850 ] On loosely ordered memory systems (PPC for example), the WQE elements were being updated in memory, but not necessarily flushed before the separate doorbell was written to hw which would cause hw to dma the WQE element. Thus, the hardware occasionally received partially updated WQE data. Add the memory barrier after updating the WQE memory. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: Re-fix off by one in sg_fill_request_table()Ben Hutchings2017-11-021-1/+1
| | | | | | | | | | | | | | | | | | | commit 587c3c9f286cee5c9cac38d28c8ae1875f4ec85b upstream. Commit 109bade9c625 ("scsi: sg: use standard lists for sg_requests") introduced an off-by-one error in sg_ioctl(), which was fixed by commit bd46fc406b30 ("scsi: sg: off by one in sg_ioctl()"). Unfortunately commit 4759df905a47 ("scsi: sg: factor out sg_fill_request_table()") moved that code, and reintroduced the bug (perhaps due to a botched rebase). Fix it again. Fixes: 4759df905a47 ("scsi: sg: factor out sg_fill_request_table()") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: scsi_dh_emc: return success in clariion_std_inquiry()Dan Carpenter2017-10-211-1/+1
| | | | | | | | | | | | | [ Upstream commit 4d7d39a18b8b81511f0b893b7d2203790bf8a58b ] We accidentally return an uninitialized variable on success. Fixes: b6ff1b14cdf4 ("[SCSI] scsi_dh: Update EMC handler") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: scsi_transport_iscsi: fix the issue that iscsi_if_rx doesn't parse ↵Xin Long2017-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nlmsg properly commit c88f0e6b06f4092995688211a631bb436125d77b upstream. ChunYu found a kernel crash by syzkaller: [ 651.617875] kasan: CONFIG_KASAN_INLINE enabled [ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 651.618731] general protection fault: 0000 [#1] SMP KASAN [ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32 [ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000 [ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590 [...] [ 651.627260] Call Trace: [ 651.629156] skb_release_all+0x4f/0x60 [ 651.629450] consume_skb+0x1a5/0x600 [ 651.630705] netlink_unicast+0x505/0x720 [ 651.632345] netlink_sendmsg+0xab2/0xe70 [ 651.633704] sock_sendmsg+0xcf/0x110 [ 651.633942] ___sys_sendmsg+0x833/0x980 [ 651.637117] __sys_sendmsg+0xf3/0x240 [ 651.638820] SyS_sendmsg+0x32/0x50 [ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2 It's caused by skb_shared_info at the end of sk_buff was overwritten by ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx. During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh), ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a new value to skb_shinfo(SKB)->nr_frags by ev->type. This patch is to fix it by checking nlh->nlmsg_len properly there to avoid over accessing sk_buff. Reported-by: ChunYu Wang <chunwang@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: qla2xxx: Fix an integer overflow in sysfs codeDan Carpenter2017-09-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | commit e6f77540c067b48dee10f1e33678415bfcc89017 upstream. The value of "size" comes from the user. When we add "start + size" it could lead to an integer overflow bug. It means we vmalloc() a lot more memory than we had intended. I believe that on 64 bit systems vmalloc() can succeed even if we ask it to allocate huge 4GB buffers. So we would get memory corruption and likely a crash when we call ha->isp_ops->write_optrom() and ->read_optrom(). Only root can trigger this bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194061 Fixes: b7cc176c9eb3 ("[SCSI] qla2xxx: Allow region-based flash-part accesses.") Reported-by: shqking <shqking@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: fixup infoleak when using SG_GET_REQUEST_TABLEHannes Reinecke2017-09-271-3/+2
| | | | | | | | | | | | | | | | | commit 3e0097499839e0fe3af380410eababe5a47c4cf9 upstream. When calling SG_GET_REQUEST_TABLE ioctl only a half-filled table is returned; the remaining part will then contain stale kernel memory information. This patch zeroes out the entire table to avoid this issue. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: factor out sg_fill_request_table()Hannes Reinecke2017-09-271-26/+35
| | | | | | | | | | | | | | | commit 4759df905a474d245752c9dc94288e779b8734dd upstream. Factor out sg_fill_request_table() for better readability. [mkp: typos, applied by hand] Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: off by one in sg_ioctl()Dan Carpenter2017-09-271-1/+1
| | | | | | | | | | | | | | commit bd46fc406b30d1db1aff8dabaff8d18bb423fdcf upstream. If "val" is SG_MAX_QUEUE then we are one element beyond the end of the "rinfo" array so the > should be >=. Fixes: 109bade9c625 ("scsi: sg: use standard lists for sg_requests") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: use standard lists for sg_requestsHannes Reinecke2017-09-271-86/+61
| | | | | | | | | | | | | | | commit 109bade9c625c89bb5ea753aaa1a0a97e6fbb548 upstream. 'Sg_request' is using a private list implementation; convert it to standard lists. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: remove 'save_scat_len'Hannes Reinecke2017-09-271-2/+0
| | | | | | | | | | | | | | commit 136e57bf43dc4babbfb8783abbf707d483cacbe3 upstream. Unused. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: recheck MMAP_IO request length with lock heldTodd Poynor2017-09-131-2/+5
| | | | | | | | | | | | | | | | | | | | | | | commit 8d26f491116feaa0b16de370b6a7ba40a40fa0b4 upstream. Commit 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array") adds needed concurrency protection for the "reserve" buffer. Some checks that are initially made outside the lock are replicated once the lock is taken to ensure the checks and resulting decisions are made using consistent state. The check that a request with flag SG_FLAG_MMAP_IO set fits in the reserve buffer also needs to be performed again under the lock to ensure the reserve buffer length compared against matches the value in effect when the request is linked to the reserve buffer. An -ENOMEM should be returned in this case, instead of switching over to an indirect buffer as for non-MMAP_IO requests. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZETodd Poynor2017-09-131-3/+9
| | | | | | | | | | | | | | | | | | commit 6a8dadcca81fceff9976e8828cceb072873b7bd5 upstream. Take f_mutex around mmap() processing to protect against races with the SG_SET_RESERVED_SIZE ioctl. Ensure the reserve buffer length remains consistent during the mapping operation, and set the "mmap called" flag to prevent further changes to the reserved buffer size as an atomic operation with the mapping. [mkp: fixed whitespace] Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: reset 'res_in_use' after unlinking reserved arrayHannes Reinecke2017-09-021-0/+2
| | | | | | | | | | | | | | | | | | | commit e791ce27c3f6a1d3c746fd6a8f8e36c9540ec6f9 upstream. Once the reserved page array is unused we can reset the 'res_in_use' state; here we can do a lazy update without holding the mutex as we only need to check against concurrent access, not concurrent release. [mkp: checkpatch] Fixes: 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array") Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Todd Poynor <toddpoynor@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: protect accesses to 'reserved' page arrayHannes Reinecke2017-09-021-21/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1bc0eb0446158cc76562176b80623aa119afee5b upstream. The 'reserved' page array is used as a short-cut for mapping data, saving us to allocate pages per request. However, the 'reserved' array is only capable of holding one request, so this patch introduces a mutex for protect 'sg_fd' against concurrent accesses. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [toddpoynor@google.com: backport to 3.18-4.9, fixup for bad ioctl SG_SET_FORCE_LOW_DMA code removed in later versions and not modified by the original patch.] Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: isci: avoid array subscript warningArnd Bergmann2017-09-021-0/+3
| | | | | | | | | | | | | | | | | | commit 5cfa2a3c7342bd0b50716c8bb32ee491af43c785 upstream. I'm getting a new warning with gcc-7: isci/remote_node_context.c: In function 'sci_remote_node_context_destruct': isci/remote_node_context.c:69:16: error: array subscript is above array bounds [-Werror=array-bounds] This is odd, since we clearly cover all values for enum scis_sds_remote_node_context_states here. Anyway, checking for an array overflow can't harm and it makes the warning go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: qla2xxx: Get mutex lock before checking optrom_stateMilan P. Gandhi2017-08-111-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c7702b8c22712a06080e10f1d2dee1a133ec8809 ] There is a race condition with qla2xxx optrom functions where one thread might modify optrom buffer, optrom_state while other thread is still reading from it. In couple of crashes, it was found that we had successfully passed the following 'if' check where we confirm optrom_state to be QLA_SREADING. But by the time we acquired mutex lock to proceed with memory_read_from_buffer function, some other thread/process had already modified that option rom buffer and optrom_state from QLA_SREADING to QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system: if (ha->optrom_state != QLA_SREADING) return 0; mutex_lock(&ha->optrom_mutex); rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer, ha->optrom_region_size); mutex_unlock(&ha->optrom_mutex); With current optrom function we get following crash due to a race condition: [ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1479.466707] IP: [<ffffffff81326756>] memcpy+0x6/0x110 [...] [ 1479.473673] Call Trace: [ 1479.474296] [<ffffffff81225cbc>] ? memory_read_from_buffer+0x3c/0x60 [ 1479.474941] [<ffffffffa01574dc>] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx] [ 1479.475571] [<ffffffff8127e76b>] read+0xdb/0x1f0 [ 1479.476206] [<ffffffff811fdf9e>] vfs_read+0x9e/0x170 [ 1479.476839] [<ffffffff811feb6f>] SyS_read+0x7f/0xe0 [ 1479.477466] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b Below patch modifies qla2x00_sysfs_read_optrom, qla2x00_sysfs_write_optrom functions to get the mutex_lock before checking ha->optrom_state to avoid similar crashes. The patch was applied and tested and same crashes were no longer observed again. Tested-by: Milan P. Gandhi <mgandhi@redhat.com> Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mpt3sas: Don't overreach ioc->reply_post[] during initializationCalvin Owens2017-08-111-17/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5ec8a1753bc29efa7e4b1391d691c9c719b30257 upstream. In _base_make_ioc_operational(), we walk ioc->reply_queue_list and pull a pointer out of successive elements of ioc->reply_post[] for each entry in that list if RDPQ is enabled. Since the code pulls the pointer for the next iteration at the bottom of the loop, it triggers the a KASAN dump on the final iteration: BUG: KASAN: slab-out-of-bounds in _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] at addr ffff880754816ab0 Read of size 8 by task modprobe/305 <snip> Call Trace: [<ffffffff81dfc591>] dump_stack+0x4d/0x6c [<ffffffff814c9689>] print_trailer+0xf9/0x150 [<ffffffff814ceda4>] object_err+0x34/0x40 [<ffffffff814d1231>] kasan_report_error+0x221/0x530 [<ffffffff814d1673>] __asan_report_load8_noabort+0x43/0x50 [<ffffffffa0043637>] _base_make_ioc_operational+0x47b7/0x47e0 [mpt3sas] [<ffffffffa0049a51>] mpt3sas_base_attach+0x1991/0x2120 [mpt3sas] [<ffffffffa0053c93>] _scsih_probe+0xeb3/0x16b0 [mpt3sas] [<ffffffff81ebd047>] local_pci_probe+0xc7/0x170 [<ffffffff81ebf2cf>] pci_device_probe+0x20f/0x290 [<ffffffff820d50cd>] really_probe+0x17d/0x600 [<ffffffff820d56a3>] __driver_attach+0x153/0x190 [<ffffffff820cffac>] bus_for_each_dev+0x11c/0x1a0 [<ffffffff820d421d>] driver_attach+0x3d/0x50 [<ffffffff820d378a>] bus_add_driver+0x44a/0x5f0 [<ffffffff820d666c>] driver_register+0x18c/0x3b0 [<ffffffff81ebcb76>] __pci_register_driver+0x156/0x200 [<ffffffffa00c8135>] _mpt3sas_init+0x135/0x1000 [mpt3sas] [<ffffffff81000423>] do_one_initcall+0x113/0x2b0 [<ffffffff813caa5a>] do_init_module+0x1d0/0x4d8 [<ffffffff81273909>] load_module+0x6729/0x8dc0 [<ffffffff81276123>] SYSC_init_module+0x183/0x1a0 [<ffffffff8127625e>] SyS_init_module+0xe/0x10 [<ffffffff828fe7d7>] entry_SYSCALL_64_fastpath+0x12/0x6a Fix this by pulling the value at the beginning of the loop. Signed-off-by: Calvin Owens <calvinowens@fb.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jens Axboe <axboe@fb.com> Acked-by: Chaitra Basappa <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-10 05:34:32 +0000