summaryrefslogtreecommitdiffstats
path: root/drivers/spi/Makefile
Commit message (Collapse)AuthorAgeFilesLines
...
* | spi: npcm-fiu: add NPCM FIU controller driverTomer Maimon2019-08-301-0/+1
|/ | | | | | | | | | | | | | | | | | Add Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master controller driver using SPI-MEM interface. The FIU supports single, dual or quad communication interface. the FIU controller can operate in following modes: - User Mode Access(UMA): provides flash access by using an indirect address/data mechanism. - direct rd/wr mode: maps the flash memory into the core address space. - SPI-X mode: used for an expansion bus to an ASIC or CPLD. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20190828142513.228556-3-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Add spi driver for Socionext SynQuacer platformMasahisa Kojima2019-06-041-0/+1
| | | | | | | | | This patch adds support for controller found on synquacer platforms. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: spi-mem: Add support for Zynq QSPI controllerNaga Sureshkumar Relli2019-04-051-0/+1
| | | | | | | Add support for QSPI controller driver used by Xilinx Zynq SOC. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: mt7621: Move SPI driver out of stagingStefan Roese2019-03-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch moves the MT7621 SPI driver, which is used on some Ralink / MediaTek MT76xx MIPS SoC's, out of the staging directory. No changes to the source code are done in this patch. This driver version was tested successfully on an MT7688 based platform with an SPI NOR on CS0 and an SPI NAND on CS1 without any issues (so far). This patch also documents the devicetree bindings for the MT7621 SPI device driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Rob Herring <robh@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: NeilBrown <neil@brown.name> Cc: Sankalp Negi <sankalpnegi2310@gmail.com> Cc: Chuanhong Guo <gch981213@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Armando Miraglia <arma2ff0@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: sifive: Add driver for the SiFive SPI controllerYash Shah2019-02-191-0/+1
| | | | | | | | | | Add driver for the SiFive SPI controller on the HiFive Unleashed board. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: spi-mem: Add driver for NXP FlexSPI controllerYogesh Narayan Gaur2019-01-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add driver for NXP FlexSPI host controller (0) What is the FlexSPI controller? FlexSPI is a flexsible SPI host controller which supports two SPI channels and up to 4 external devices. Each channel supports Single/Dual/Quad/Octal mode data transfer (1/2/4/8 bidirectional data lines) i.e. FlexSPI acts as an interface to external devices, maximum 4, each with up to 8 bidirectional data lines. It uses new SPI memory interface of the SPI framework to issue flash memory operations to up to four connected flash devices (2 buses with 2 CS each). (1) Tested this driver with the mtd_debug and JFFS2 filesystem utility on NXP LX2160ARDB and LX2160AQDS targets. LX2160ARDB is having two NOR slave device connected on single bus A i.e. A0 and A1 (CS0 and CS1). LX2160AQDS is having two NOR slave device connected on separate buses one flash on A0 and second on B1 i.e. (CS0 and CS3). Verified this driver on following SPI NOR flashes: Micron, mt35xu512ab, [Read - 1 bit mode] Cypress, s25fl512s, [Read - 1/2/4 bit mode] Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Tested-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Add a driver for the Freescale/NXP QuadSPI controllerFrieder Schrempf2019-01-071-0/+1
| | | | | | | | | | | | | | | | | | | | This driver is derived from the SPI NOR driver at mtd/spi-nor/fsl-quadspi.c. It uses the new SPI memory interface of the SPI framework to issue flash memory operations to up to four connected flash chips (2 buses with 2 CS each). The controller does not support generic SPI messages. This patch also disables the build of the "old" driver and reuses its Kconfig option CONFIG_SPI_FSL_QUADSPI to replace it. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Han Xu <han.xu@nxp.com> Reviewed-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Tested-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Tested-by: Han Xu <han.xu@nxp.com> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'spi/topic/mem' and 'spi/topic/mtd' into spi-nextMark Brown2018-12-201-0/+1
|\ \
| | * spi: Add QuadSPI driver for Atmel SAMA5D2Piotr Bugalski2018-11-071-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | Kernel contains QSPI driver strongly tied to MTD and nor-flash memory. New spi-mem interface allows usage also other memory types, especially much larger NAND with SPI interface. This driver works as SPI controller and is not related to MTD, however can work with NAND-flash or other peripherals using spi-mem interface. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Piotr Bugalski <bugalski.piotr@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: npcm: add NPCM PSPI controller driverTomer Maimon2018-11-131-0/+1
| | | | | | | | | | | | | | Add Nuvoton NPCM BMC Peripheral SPI controller driver. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Add MXIC controller driverMason Yang2018-11-051-0/+1
|/ | | | | | | | Add a driver for Macronix SPI controller IP. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge tag 'mfd-next-4.20' of ↵Linus Torvalds2018-10-251-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - Add support for USART SPI to AT91* New Functionality - Add support for Audio CODECs to motorola-cpcap Fix-ups - DT documentation fix-ups; atmel-usart - Staticise functions/structs; spi-at91-usart, arizona-core - Constify; ti-lmu - Fix memory leaks; menelaus - Change device 'wake-up' status; ti_am335x_tscadc, max8997 - Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997 - SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers), - Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_* - Build as module; sec-irq - Use new %pOFn printk format for device_node.name; max77620 - Remove unused code; madera - Use generic MACROs; intel_msic, intel_soc_pmic_crc - Move to GPIOD; ti-lmu - Use managed resources; ti-lmu Bug Fixes - Add missing headers; at91-usart - Prevent device from entering low-power mode; arizona-core - Poll for BOOT_DONE to avoid still-booting NACK; madera-core - Prevent ADC read from shutting down device; mc13xxx-core" * tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: cros_ec: Avoid unneeded internal declaration warning mfd: ti-lmu: Use of_device_get_match_data() helper mfd: ti-lmu: Use managed resource for everything mfd: ti-lmu: Switch to GPIOD mfd: ti-lmu: constify mfd_cell tables mfd: max8997: Disable interrupt handling for suspend/resume cycle mfd: max8997: Enale irq-wakeup unconditionally mfd: arizona: Make array mclk_name static, shrinks object size MAINTAINERS: Add myself as designated reviewer of Intel MFD PMIC mfd: Convert Intel PMIC drivers to use SPDX identifier 1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier. mfd: Sort headers alphabetically for Intel PMIC drivers mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macro mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macro mfd: intel_msic: Use DEFINE_RES_IRQ() macro mfd: motorola-cpcap: Add audio-codec support mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values mfd: madera: Remove unused forward reference mfd: max77620: Convert to using %pOFn instead of device_node.name mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE ...
| * spi: at91-usart: Add driver for at91-usart as SPIRadu Pirea2018-09-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the driver for at91-usart in spi mode. The USART IP can be configured to work in many modes and one of them is SPI. The driver was tested on sama5d3-xplained and sama5d4-xplained boards with enc28j60 ethernet controller as slave. Signed-off-by: Radu Pirea <radu.pirea@microchip.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviwed-by: Mark Brown <broonie@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | spi: spi-mem: add stm32 qspi controllerLudovic Barre2018-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qspi controller is a specialized communication interface targeting single, dual or quad SPI Flash memories (NOR/NAND). It can operate in any of the following modes: -indirect mode: all the operations are performed using the quadspi registers -read memory-mapped mode: the external Flash memory is mapped to the microcontroller address space and is seen by the system as if it was an internal memory tested on: -NOR: mx66l51235l -NAND: MT29F2G01ABAGD Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: spi-geni-qcom: Add SPI driver support for GENI based QUPGirish Mahadevan2018-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver supports GENI based SPI Controller in the Qualcomm SOCs. The Qualcomm Generic Interface (GENI) is a programmable module supporting a wide range of serial interfaces including SPI. This driver supports SPI operations using FIFO mode of transfer. Signed-off-by: Girish Mahadevan <girishm@codeaurora.org> Signed-off-by: Dilip Kota <dkota@codeaurora.org> Signed-off-by: Alok Chauhan <alokc@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: Introduce new driver for Qualcomm QuadSPI controllerGirish Mahadevan2018-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | New driver for Qualcomm QuadSPI(QSPI) controller that is used to communicate with slaves such as flash memory devices. The QSPI controller can operate in 2 or 4 wire mode but only supports SPI Mode 0. The controller can also operate in Single or Dual data rate modes. Signed-off-by: Girish Mahadevan <girishm@codeaurora.org> Signed-off-by: Ryan Case <ryandcase@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: mediatek: add spi slave for Mediatek MT2712Leilk Liu2018-09-281-0/+1
| | | | | | | | | | | | | | This patch adds basic spi slave for MT2712. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: sprd: Add SPI driver for Spreadtrum SC9860Lanqing Liu2018-08-281-0/+1
|/ | | | | | | | This patch adds the SPI controller driver for Spreadtrum SC9860 platform. Signed-off-by: Lanqing Liu <lanqing.liu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: add SPI controller driver for UniPhier SoCKeiji Hayashibara2018-08-011-0/+1
| | | | | | | | | | | | | | | | | | Add SPI controller driver implemented in Socionext UniPhier SoCs. UniPhier SoCs have two types SPI controllers; SCSSI supports a single channel, and MCSSI supports multiple channels. This driver supports SCSSI only. This controller has 32bit TX/RX FIFO with depth of eight entry, and supports the SPI master mode only. This commit is implemented in PIO transfer mode, not DMA transfer. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: Extend the core to ease integration of SPI memory controllersBoris Brezillon2018-05-111-0/+1
| | | | | | | | | | | | | | | | Some controllers are exposing high-level interfaces to access various kind of SPI memories. Unfortunately they do not fit in the current spi_controller model and usually have drivers placed in drivers/mtd/spi-nor which are only supporting SPI NORs and not SPI memories in general. This is an attempt at defining a SPI memory interface which works for all kinds of SPI memories (NORs, NANDs, SRAMs). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de> Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: remove forgotten CONFIG_SPI_BCM53XXRafał Miłecki2018-05-101-1/+0
| | | | | | | | | | | I accidentally sent an early version of patch removing spi-bcm53xx driver which got rid of .c and .h files *only*. I amended local commit but forgot to re-format the patch. This commit removes leftovers of dropped driver. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: remove blackfin related host driversArnd Bergmann2018-03-261-3/+0
| | | | | | | | | The blackfin architecture is getting removed, so these won't be needed any more. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
*-. Merge remote-tracking branches 'spi/topic/sh-msiof', 'spi/topic/slave', ↵Mark Brown2017-11-101-0/+1
|\ \ | | | | | | | | | 'spi/topic/spreadtrum' and 'spi/topic/tegra114' into spi-next
| | * spi: Add ADI driver for Spreadtrum platformBaolin Wang2017-09-191-0/+1
| |/ | | | | | | | | | | | | | | This patch adds ADI driver based on SPI framework for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* / License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
*-. Merge remote-tracking branches 'spi/topic/spidev', 'spi/topic/st-ssc4' and ↵Mark Brown2017-07-031-0/+1
|\ \ | | | | | | | | | 'spi/topic/stm32' into spi-next
| | * spi: add driver for STM32 SPI controllerAmelie Delaunay2017-06-211-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | The STM32 Serial Peripheral Interface (SPI) can be used to communicate with external devices while using the specific synchronous protocol. It supports a half-duplex, full-duplex and simplex synchronous, serial communication with external devices with 4-bit to 16/32-bit per word. It has two 8x/16x 8-bit embedded Rx and TxFIFOs with DMA capability. It can operate in master or slave mode. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| |
| \
*-. \ Merge remote-tracking branches 'spi/topic/loopback', ↵Mark Brown2017-07-031-0/+1
|\ \ \ | | |/ | |/| | | | 'spi/topic/meson-spicc', 'spi/topic/mtk' and 'spi/topic/omap2-mcspi' into spi-next
| | * spi: Add Meson SPICC driverNeil Armstrong2017-05-241-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | The SPICC hardware block on the Amlogic SoCs is Communication oriented and can do Full-Duplex 8- to 32-bit width SPI transfers up to 30MHz. The current driver only supportd the PIO transfer mode since the DMA seems broken on available hardware. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: slave: Add SPI slave handler controlling system stateGeert Uytterhoeven2017-05-261-0/+1
| | | | | | | | | | | | | | | | | | Add an example SPI slave handler to allow remote control of system reboot, power off, halt, and suspend. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: slave: Add SPI slave handler reporting uptime at previous messageGeert Uytterhoeven2017-05-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add an example SPI slave handler responding with the uptime at the time of reception of the last SPI message. This can be used by an external microcontroller as a dead man's switch. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: core: Add support for registering SPI slave controllersGeert Uytterhoeven2017-05-261-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | Add support for registering SPI slave controllers using the existing SPI master framework: - SPI slave controllers must use spi_alloc_slave() instead of spi_alloc_master(), and should provide an additional callback "slave_abort" to abort an ongoing SPI transfer request, - SPI slave controllers are added to a new "spi_slave" device class, - SPI slave handlers can be bound to the SPI slave device represented by an SPI slave controller using a DT child node named "slave", - Alternatively, (un)binding an SPI slave handler to the SPI slave device represented by an SPI slave controller can be done by (un)registering the slave device through a sysfs virtual file named "slave". From the point of view of an SPI slave protocol handler, an SPI slave controller looks almost like an ordinary SPI master controller. The only exception is that a transfer request will block on the remote SPI master, and may be cancelled using spi_slave_abort(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: lantiq-ssc: add support for Lantiq SSC SPI controllerHauke Mehrtens2017-02-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | This driver supports the Lantiq SSC SPI controller in master mode. This controller is found on Intel (former Lantiq) SoCs like the Danube, Falcon, xRX200, xRX300. The hardware uses two hardware FIFOs one for received and one for transferred bytes. When the driver writes data into the transmit FIFO the complete word is taken from the FIFO into a shift register. The data from this shift register is then written to the wire. This driver uses the interrupts signaling the status of the FIFOs and not the shift register. It is also possible to use the interrupts for the shift register, but they will send a signal after every word. When using the interrupts for the shift register we get a signal when the last word is written into the shift register and not when it is written to the wire. After all FIFOs are empty the driver busy waits till the hardware is not busy any more and returns the transfer status. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'spi/topic/fsl-lpspi', 'spi/topic/imx', ↵Mark Brown2016-12-121-0/+1
|\ \ | | | | | | | | | 'spi/topic/jcore' and 'spi/topic/omap' into spi-next
| * | spi: imx: add lpspi bus driverGao Pan2016-11-221-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | This patch adds lpspi driver to support new i.MX products which use lpspi instead of ecspi. The lpspi can continue operating in stop mode when an appropriate clock is available. It is also designed for low CPU overhead with DMA offloading of FIFO register accesses. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* / spi: Add support for Armada 3700 SPI ControllerRomain Perier2016-12-081-0/+1
|/ | | | | | | | | | | | | | | | | Marvell Armada 3700 SoC comprises an SPI Controller. This Controller supports up to 4 SPI slave devices, with dedicated chip selects,supports SPI mode 0/1/2 and 3, CPIO or Fifo mode with DMA transfers and different SPI transfer mode (Single, Dual or Quad). This commit adds basic driver support for FIFO mode. In this mode, dedicated registers are used to store the instruction, the address, the read mode and the data. Write and Read FIFO are used to store the outcoming or incoming data. The data FIFOs are accessible via DMA or by the CPU. Only the CPU is supported for now. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*-. Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/pic32-sqi', ↵Mark Brown2016-09-301-0/+2
|\ \ | | | | | | | | | 'spi/topic/pxa2xx' and 'spi/topic/qup' into spi-next
| * | spi: octeon: Add ThunderX driverJan Glauber2016-08-191-0/+2
| |/ | | | | | | | | | | | | | | | | | | Add ThunderX SPI driver using the shared part from the Octeon driver. The main difference of the ThunderX driver is that it is a PCI device so probing is different. The system clock settings can be specified in device tree. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| |
| \
*-. \ Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/imx', ↵Mark Brown2016-09-301-0/+1
|\ \ \ | | |/ | |/| | | | 'spi/topic/jcore', 'spi/topic/loopback' and 'spi/topic/meson' into spi-next
| | * spi: add driver for J-Core SPI controllerRich Felker2016-08-081-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The J-Core "spi2" device is a PIO-based SPI master controller. It differs from "bitbang" devices in that that it's clocked in hardware rather than via soft clock modulation over gpio, and performs byte-at-a-time transfers between the cpu and SPI controller. This driver will be extended to support future versions of the J-Core SPI controller with DMA transfers when they become available. Signed-off-by: Rich Felker <dalias@libc.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: iproc-qspi: Add Broadcom iProc SoCs supportKamal Dasu2016-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | This spi driver uses the common spi-bcm-qspi driver and implements iProc SoCs specific interrupt controller. The common driver now calls the SoC handlers when present. Adding support for both muxed l1 and unmuxed interrupt sources. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: brcmstb-qspi: Broadcom settop platform driverKamal Dasu2016-09-141-1/+1
| | | | | | | | | | | | | | | | | | Adding the settop SoC platfrom driver, this driver is compatible with the settop MSPI+BSPI and MSPI only blocks implemented on the SoCs. Driver calls the spi-bcm-qspi probe(), remove() and pm_ops. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | spi: bcm-qspi: Add Broadcom MSPI driverKamal Dasu2016-09-141-0/+1
|/ | | | | | | | | | | Master SPI driver for Broadcom settop, iProc SoCs. The driver is used for devices that use SPI protocol on BRCMSTB, NSP, NS2 SoCs. SoC platform driver call exported porbe(), remove() and suspend/resume pm_ops implemented in this common driver. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Yendapally Reddy Dhananjaya Reddy Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: octeon: Split driver into Octeon specific and common partsJan Glauber2016-07-241-0/+1
| | | | | | | | Separate driver probing from SPI transfer functions. Signed-off-by: Jan Glauber <jglauber@cavium.com> Tested-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: pic32-sqi: add SPI driver for PIC32 SQI controller.Purna Chandra Mandal2016-04-181-0/+1
| | | | | | | | | | | | This driver implements SPI master interface for Quad SPI controller, specifically for accessing quad SPI flash. It uses descriptor-based DMA transfer mode and supports half-duplex communication for single, dual and quad SPI transactions. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: spi-pic32: Add PIC32 SPI master driverPurna Chandra Mandal2016-04-041-0/+1
| | | | | | | | | | | The PIC32 SPI driver is capable of performing SPI transfers using PIO or external DMA engine. GPIO controlled /CS support is made default in the driver for correct operation of the controller. This can be enabled by adding "cs-gpios" property of the SPI node in board dts file. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
*---. Merge remote-tracking branches 'spi/topic/lp8841', 'spi/topic/msg', ↵Mark Brown2016-03-111-2/+2
|\ \ \ | | | | | | | | | | | | 'spi/topic/pl022' and 'spi/topic/pxa2xx' into spi-next
| | | * Merge branch 'topic/acpi' of ↵Mark Brown2016-02-091-0/+1
| | | |\ | | | |/ | | |/| | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-pxa2xx
| | | * spi: pxa2xx: Remove CONFIG_SPI_PXA2XX_DMAJarkko Nikula2016-01-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After removal of legacy PXA DMA code by the commit 6356437e65c2 ("spi: spi-pxa2xx: remove legacy PXA DMA bits") the CONFIG_SPI_PXA2XX_DMA follows the CONFIG_SPI_PXA2XX and cannot be disabled alone. Therefore remove this config symbol and dead definitions from the spi-pxa2xx.h. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | spi: master driver to enable RTC on ICPDAS LP-8841Sergei Ianovich2016-02-241-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ICP DAS LP-8841 contains a DS-1302 RTC. This driver provides an SPI master which makes the RTC usable. The driver is not supposed to work with anything else. The driver uses the standard MicroWire half-duplex transfer timing. Master output is set on low clock and sensed by the RTC on the rising edge. Master input is set by the RTC on the trailing edge and is sensed by the master on low clock. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 17:09:24 +0000