summaryrefslogtreecommitdiffstats
path: root/drivers/spi
Commit message (Collapse)AuthorAgeFilesLines
* spi: spi-gpio: fix SPI_CS_HIGH capabilityRussell King2019-09-161-2/+1
| | | | | | | | | | | | | | | | | [ Upstream commit b89fefda7d4e3a649129584d855be233c7465264 ] spi-gpio is capable of dealing with active-high chip-selects. Unfortunately, commit 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") broke this by setting master->mode_bits, which overrides the setting in the spi-bitbang code. Fix this. [Fixed a trivial conflict with SPI_3WIRE_HIZ support -- broonie] Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: bcm2835aux: fix corruptions for longer spi transfersMartin Sperl2019-09-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 73b114ee7db1750c0b535199fae383b109bd61d0 ] On long running tests with a mcp2517fd can controller it showed that on rare occations the data read shows corruptions for longer spi transfers. Example of a 22 byte transfer: expected (as captured on logic analyzer): FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b read by the driver: FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may read data from the fifo reliably without any corruption. Surprisingly the only values ever empirically read in BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30. So whenever the mask is not 0 we can read from the fifo in a safe manner. The patch has now been tested intensively and we are no longer able to reproduce the "RX" issue any longer. Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Reported-by: Hubert Denkmair <h.denkmair@intence.de> Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: bcm2835aux: remove dangerous uncontrolled read of fifoMartin Sperl2019-09-101-7/+0
| | | | | | | | | | | | | | | | | [ Upstream commit c7de8500fd8ecbb544846dd5f11dca578c3777e1 ] This read of the fifo is a potential candidate for a race condition as the spi transfer is not necessarily finished and so can lead to an early read of the fifo that still misses data. So it has been removed. Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Suggested-by: Hubert Denkmair <h.denkmair@intence.de> Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: bcm2835aux: unifying code between polling and interrupt driven codeMartin Sperl2019-09-101-33/+18
| | | | | | | | | | | [ Upstream commit 7188a6f0eee3f1fae5d826cfc6d569657ff950ec ] Sharing more code between polling and interrupt-driven mode. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: bcm2835: Fix 3-wire mode if DMA is enabledLukas Wunner2019-08-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8d8bef50365847134b51c1ec46786bc2873e4e47 upstream. Commit 6935224da248 ("spi: bcm2835: enable support of 3-wire mode") added 3-wire support to the BCM2835 SPI driver by setting the REN bit (Read Enable) in the CS register when receiving data. The REN bit puts the transmitter in high-impedance state. The driver recognizes that data is to be received by checking whether the rx_buf of a transfer is non-NULL. Commit 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") subsequently broke 3-wire support because it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is *always* non-NULL if DMA is enabled. Reinstate 3-wire support by not only checking whether rx_buf is non-NULL, but also checking that it is not the dummy buffer. Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Reported-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.2+ Cc: Martin Sperl <kernel@martin.sperl.org> Acked-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: bitbang: Fix NULL pointer dereference in spi_unregister_masterYueHaibing2019-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5caaf29af5ca82d5da8bc1d0ad07d9e664ccf1d8 ] If spi_register_master fails in spi_bitbang_start because device_add failure, We should return the error code other than 0, otherwise calling spi_bitbang_stop may trigger NULL pointer dereference like this: BUG: KASAN: null-ptr-deref in __list_del_entry_valid+0x45/0xd0 Read of size 8 at addr 0000000000000000 by task syz-executor.0/3661 CPU: 0 PID: 3661 Comm: syz-executor.0 Not tainted 5.1.0+ #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xa9/0x10e ? __list_del_entry_valid+0x45/0xd0 ? __list_del_entry_valid+0x45/0xd0 __kasan_report+0x171/0x18d ? __list_del_entry_valid+0x45/0xd0 kasan_report+0xe/0x20 __list_del_entry_valid+0x45/0xd0 spi_unregister_controller+0x99/0x1b0 spi_lm70llp_attach+0x3ae/0x4b0 [spi_lm70llp] ? 0xffffffffc1128000 ? klist_next+0x131/0x1e0 ? driver_detach+0x40/0x40 [parport] port_check+0x3b/0x50 [parport] bus_for_each_dev+0x115/0x180 ? subsys_dev_iter_exit+0x20/0x20 __parport_register_driver+0x1f0/0x210 [parport] ? 0xffffffffc1150000 do_one_initcall+0xb9/0x3b5 ? perf_trace_initcall_level+0x270/0x270 ? kasan_unpoison_shadow+0x30/0x40 ? kasan_unpoison_shadow+0x30/0x40 do_init_module+0xe0/0x330 load_module+0x38eb/0x4270 ? module_frob_arch_sections+0x20/0x20 ? kernel_read_file+0x188/0x3f0 ? find_held_lock+0x6d/0xd0 ? fput_many+0x1a/0xe0 ? __do_sys_finit_module+0x162/0x190 __do_sys_finit_module+0x162/0x190 ? __ia32_sys_init_module+0x40/0x40 ? __mutex_unlock_slowpath+0xb4/0x3f0 ? wait_for_completion+0x240/0x240 ? vfs_write+0x160/0x2a0 ? lockdep_hardirqs_off+0xb5/0x100 ? mark_held_locks+0x1a/0x90 ? do_syscall_64+0x14/0x2a0 do_syscall_64+0x72/0x2a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dmaengine: idma64: Use actual device for DMA transfersAndy Shevchenko2019-06-151-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5ba846b1ee0792f5a596b9b0b86d6e8cdebfab06 ] Intel IOMMU, when enabled, tries to find the domain of the device, assuming it's a PCI one, during DMA operations, such as mapping or unmapping. Since we are splitting the actual PCI device to couple of children via MFD framework (see drivers/mfd/intel-lpss.c for details), the DMA device appears to be a platform one, and thus not an actual one that performs DMA. In a such situation IOMMU can't find or allocate a proper domain for its operations. As a result, all DMA operations are failed. In order to fix this, supply parent of the platform device to the DMA engine framework and fix filter functions accordingly. We may rely on the fact that parent is a real PCI device, because no other configuration is present in the wild. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts] Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: Fix zero length xfer bugChris Lesiak2019-05-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5442dcaa0d90fc376bdfc179a018931a8f43dea4 ] This fixes a bug for messages containing both zero length and unidirectional xfers. The function spi_map_msg will allocate dummy tx and/or rx buffers for use with unidirectional transfers when the hardware can only do a bidirectional transfer. That dummy buffer will be used in place of a NULL buffer even when the xfer length is 0. Then in the function __spi_map_msg, if he hardware can dma, the zero length xfer will have spi_map_buf called on the dummy buffer. Eventually, __sg_alloc_table is called and returns -EINVAL because nents == 0. This fix prevents the error by not using the dummy buffer when the xfer length is zero. Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: imx: stop buffer overflow in RX FIFO flushTrent Piepho2019-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c842749ea1d32513f9e603c074d60d7aa07cb2ef ] Commit 71abd29057cb ("spi: imx: Add support for SPI Slave mode") added an RX FIFO flush before start of a transfer. In slave mode, the master may have sent more data than expected and this data will still be in the RX FIFO at the start of the next transfer, and so needs to be flushed. However, the code to do the flush was accidentally saving this data into the previous transfer's RX buffer, clobbering the contents of whatever followed that buffer. Change it to empty the FIFO and throw away the data. Every one of the RX functions for the different eCSPI versions and modes reads the RX FIFO data using the same readl() call, so just use that, rather than using the spi_imx->rx function pointer and making sure all the different rx functions have a working "throw away" mode. There is another issue, which affects master mode when switching from DMA to PIO. There can be extra data in the RX FIFO which triggers this flush code, causing memory corruption in the same manner. I don't know why this data is unexpectedly in the FIFO. It's likely there is a different bug or erratum responsible for that. But regardless of that, I think this is proper fix the for bug at hand here. Fixes: 71abd29057cb ("spi: imx: Add support for SPI Slave mode") Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: rspi: Fix sequencer reset during initializationGeert Uytterhoeven2019-05-311-3/+6
| | | | | | | | | | | | | | | | [ Upstream commit 26843bb128590edd7eba1ad7ce22e4b9f1066ce3 ] While the sequencer is reset after each SPI message since commit 880c6d114fd79a69 ("spi: rspi: Add support for Quad and Dual SPI Transfers on QSPI"), it was never reset for the first message, thus relying on reset state or bootloader settings. Fix this by initializing it explicitly during configuration. Fixes: 0b2182ddac4b8837 ("spi: add support for Renesas RSPI") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi : spi-topcliff-pch: Fix to handle empty DMA buffersAditya Pakki2019-05-311-2/+13
| | | | | | | | | | | | [ Upstream commit f37d8e67f39e6d3eaf4cc5471e8a3d21209843c6 ] pch_alloc_dma_buf allocated tx, rx DMA buffers which can fail. Further, these buffers are used without a check. The patch checks for these failures and sends the error upstream. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: tegra114: reset controller on probeSowjanya Komatineni2019-05-311-14/+18
| | | | | | | | | | | [ Upstream commit 019194933339b3e9b486639c8cb3692020844d65 ] Fixes: SPI driver can be built as module so perform SPI controller reset on probe to make sure it is in valid state before initiating transfer. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: pxa2xx: fix SCR (divisor) calculationFlavio Suligoi2019-05-311-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 29f2133717c527f492933b0622a4aafe0b3cbe9e ] Calculate the divisor for the SCR (Serial Clock Rate), avoiding that the SSP transmission rate can be greater than the device rate. When the division between the SSP clock and the device rate generates a reminder, we have to increment by one the divisor. In this way the resulting SSP clock will never be greater than the device SPI max frequency. For example, with: - ssp_clk = 50 MHz - dev freq = 15 MHz without this patch the SSP clock will be greater than 15 MHz: - 25 MHz for PXA25x_SSP and CE4100_SSP - 16,56 MHz for the others Instead, with this patch, we have in both case an SSP clock of 12.5MHz, so the max rate of the SPI device clock is respected. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: pxa2xx: Setup maximum supported DMA transfer lengthAndy Shevchenko2019-03-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | commit ef070b4e4aa25bb5f8632ad196644026c11903bf upstream. When the commit b6ced294fb61 ("spi: pxa2xx: Switch to SPI core DMA mapping functionality") switches to SPI core provided DMA helpers, it missed to setup maximum supported DMA transfer length for the controller and thus users mistakenly try to send more data than supported with the following warning: ili9341 spi-PRP0001:01: DMA disabled for transfer length 153600 greater than 65536 Setup maximum supported DMA transfer length in order to make users know the limit. Fixes: b6ced294fb61 ("spi: pxa2xx: Switch to SPI core DMA mapping functionality") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: ti-qspi: Fix mmap read when more than one CS in useVignesh R2019-03-231-3/+3
| | | | | | | | | | | | | | | | | | commit 673c865efbdc5fec3cc525c46d71844d42c60072 upstream. Commit 4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support") has has got order of parameter wrong when calling regmap_update_bits() to select CS for mmap access. Mask and value arguments are interchanged. Code will work on a system with single slave, but fails when more than one CS is in use. Fix this by correcting the order of parameters when calling regmap_update_bits(). Fixes: 4dea6c9b0b64 ("spi: spi-ti-qspi: add mmap mode read support") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: bcm2835: Unbreak the build of esoteric configsLukas Wunner2019-01-091-1/+1
| | | | | | | | | | | | | | | | | | | | commit 29bdedfd9cf40e59456110ca417a8cb672ac9b92 upstream. Commit e82b0b382845 ("spi: bcm2835: Fix race on DMA termination") broke the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit operands (xtensa, older arm ISAs). Fix by changing the dma_pending flag's type from bool to unsigned int. Fixes: e82b0b382845 ("spi: bcm2835: Fix race on DMA termination") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: bcm2835: Avoid finishing transfer prematurely in IRQ modeLukas Wunner2019-01-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 56c1723426d3cfd4723bfbfce531d7b38bae6266 upstream. The IRQ handler bcm2835_spi_interrupt() first reads as much as possible from the RX FIFO, then writes as much as possible to the TX FIFO. Afterwards it decides whether the transfer is finished by checking if the TX FIFO is empty. If very few bytes were written to the TX FIFO, they may already have been transmitted by the time the FIFO's emptiness is checked. As a result, the transfer will be declared finished and the chip will be reset without reading the corresponding received bytes from the RX FIFO. The odds of this happening increase with a high clock frequency (such that the TX FIFO drains quickly) and either passing "threadirqs" on the command line or enabling CONFIG_PREEMPT_RT_BASE (such that the IRQ handler may be preempted between filling the TX FIFO and checking its emptiness). Fix by instead checking whether rx_len has reached zero, which means that the transfer has been received in full. This is also more efficient as it avoids one bus read access per interrupt. Note that bcm2835_spi_transfer_one_poll() likewise uses rx_len to determine whether the transfer has finished. Signed-off-by: Lukas Wunner <lukas@wunner.de> Fixes: e34ff011c70e ("spi: bcm2835: move to the transfer_one driver model") Cc: stable@vger.kernel.org # v4.1+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: bcm2835: Fix book-keeping of DMA terminationLukas Wunner2019-01-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit dbc944115eed48af110646992893dc43321368d8 upstream. If submission of a DMA TX transfer succeeds but submission of the corresponding RX transfer does not, the BCM2835 SPI driver terminates the TX transfer but neglects to reset the dma_pending flag to false. Thus, if the next transfer uses interrupt mode (because it is shorter than BCM2835_SPI_DMA_MIN_LENGTH) and runs into a timeout, dmaengine_terminate_all() will be called both for TX (once more) and for RX (which was never started in the first place). Fix it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Cc: stable@vger.kernel.org # v4.2+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: bcm2835: Fix race on DMA terminationLukas Wunner2019-01-091-6/+4
| | | | | | | | | | | | | | | | | | | | | | | commit e82b0b3828451c1cd331d9f304c6078fcd43b62e upstream. If a DMA transfer finishes orderly right when spi_transfer_one_message() determines that it has timed out, the callbacks bcm2835_spi_dma_done() and bcm2835_spi_handle_err() race to call dmaengine_terminate_all(), potentially leading to double termination. Prevent by atomically changing the dma_pending flag before calling dmaengine_terminate_all(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Cc: stable@vger.kernel.org # v4.2+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: omap2-mcspi: Add missing suspend and resume callsTony Lindgren2018-12-171-12/+25
| | | | | | | | | | | | | | | | | [ Upstream commit 91b9deefedf4c35a01027ce38bed7299605026a3 ] I've been wondering still about omap2-mcspi related suspend and resume flakeyness and looks like we're missing calls to spi_master_suspend() and spi_master_resume(). Adding those and using pm_runtime_force_suspend() and pm_runtime_force_resume() makes things work for suspend and resume and allows us to stop using noirq suspend and resume. And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things further. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* spi: gpio: No MISO does not imply no RXLinus Walleij2018-11-131-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit abf5feef3ff0cefade0c76be53b59e55fdd46093 ] There is a logical problem in spi-gpio with host just assigning a MOSI line and no MISO: this is interpreted as the host cannot do RX and the host is flagged with SPI_MASTER_NO_RX. This is wrong: since GPIO lines can switch direction, in 3WIRE operation the host will simply reverse the direction of the GPIO line and start reading from it, there is even code for doing this in the driver, but it went unnoticed because it was tested by using a master with 4 wires but a device using just 3 wires. Remove the offending flag. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: spi-ep93xx: Use dma_data_direction for ep93xx_spi_dma_{finish,prepare}Nathan Chancellor2018-11-131-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a1108c7b2efb892350ba6a0e932dfd45622f4e2b ] Clang warns when one enumerated type is implicitly converted to another. drivers/spi/spi-ep93xx.c:342:62: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] nents = dma_map_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:428:58: note: expanded from macro 'dma_map_sg' #define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:348:57: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:377:56: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ 3 warnings generated. dma_{,un}map_sg expect an enum of type dma_data_direction but this driver uses dma_transfer_direction for everything. Convert the driver to use dma_data_direction for these two functions. There are two places that strictly require an enum of type dma_transfer_direction: the direction member in struct dma_slave_config and the direction parameter in dmaengine_prep_slave_sg. To avoid using an explicit cast, add a simple function, ep93xx_dma_data_to_trans_dir, to safely map between the two types because they are not 1 to 1 in meaning. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: bcm-qspi: fix calculation of address lengthRafał Miłecki2018-11-131-1/+1
| | | | | | | | | | | | | | | | commit 0976eda7915507fe94e07870c19d717c9994b57a upstream. During implementation of the new API bcm_qspi_bspi_set_flex_mode() has been modified breaking calculation of address length. An unnecessary multiplication was added breaking flash reads. Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: bcm-qspi: switch back to reading flash using smaller chunksRafał Miłecki2018-11-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 940ec770c295682993d1cccce3081fd7c74fece8 upstream. Fixing/optimizing bcm_qspi_bspi_read() performance introduced two changes: 1) It added a loop to read all requested data using multiple BSPI ops. 2) It bumped max size of a single BSPI block request from 256 to 512 B. The later change resulted in occasional BSPI timeouts causing a regression. For some unknown reason hardware doesn't always handle reads as expected when using 512 B chunks. In such cases it may happen that BSPI returns amount of requested bytes without the last 1-3 ones. It provides the remaining bytes later but doesn't raise an interrupt until another LR start. Switching back to 256 B reads fixes that problem and regression. Fixes: 345309fa7c0c ("spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: spi-mem: Adjust op len based on message/transfer size limitationsChuanhua Han2018-11-131-0/+15
| | | | | | | | | | | | | | | commit e757996cafbeb6b71234a17130674bcd8f44c59e upstream. We need that to adjust the len of the 2nd transfer (called data in spi-mem) if it's too long to fit in a SPI message or SPI transfer. Fixes: c36ff266dc82 ("spi: Extend the core to ease integration of SPI memory controllers") Cc: <stable@vger.kernel.org> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'spi-fix-v4.19-rc5' of ↵Greg Kroah-Hartman2018-09-284-15/+82
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark writes: "spi: Fixes for v4.19 Quite a few fixes for the Renesas drivers in here, plus a fix for the Tegra driver and some documentation fixes for the recently added spi-mem code. The Tegra fix is relatively large but fairly straightforward and mechanical, it runs on probe so it's been reasonably well covered in -next testing." * tag 'spi-fix-v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-mem: Move the DMA-able constraint doc to the kerneldoc header spi: spi-mem: Add missing description for data.nbytes field spi: rspi: Fix interrupted DMA transfers spi: rspi: Fix invalid SPI use during system suspend spi: sh-msiof: Fix handling of write value for SISTR register spi: sh-msiof: Fix invalid SPI use during system suspend spi: gpio: Fix copy-and-paste error spi: tegra20-slink: explicitly enable/disable clock
| * spi: rspi: Fix interrupted DMA transfersGeert Uytterhoeven2018-09-051-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When interrupted, wait_event_interruptible_timeout() returns -ERESTARTSYS, and the SPI transfer in progress will fail, as expected: m25p80 spi0.0: SPI transfer failed: -512 spi_master spi0: failed to transfer one message from queue However, as the underlying DMA transfers may not have completed, all subsequent SPI transfers may start to fail: spi_master spi0: receive timeout qspi_transfer_out_in() returned -110 m25p80 spi0.0: SPI transfer failed: -110 spi_master spi0: failed to transfer one message from queue Fix this by calling dmaengine_terminate_all() not only for timeouts, but also for errors. This can be reproduced on r8a7991/koelsch, using "hd /dev/mtd0" followed by CTRL-C. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * spi: rspi: Fix invalid SPI use during system suspendGeert Uytterhoeven2018-09-051-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the SPI queue is running during system suspend, the system may lock up. Fix this by stopping/restarting the queue during system suspend/resume, by calling spi_master_suspend()/spi_master_resume() from the PM callbacks. In-kernel users will receive an -ESHUTDOWN error while system suspend/resume is in progress. Based on a patch for sh-msiof by Gaku Inami. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * spi: sh-msiof: Fix handling of write value for SISTR registerHiromitsu Yamasaki2018-09-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes writing to the SISTR register according to the H/W user's manual. The TDREQ bit and RDREQ bits of SISTR are read-only, and must be written their initial values of zero. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> [geert: reword] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * spi: sh-msiof: Fix invalid SPI use during system suspendGaku Inami2018-09-051-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the SPI queue is running during system suspend, the system may lock up. Fix this by stopping/restarting the queue during system suspend/resume by calling spi_master_suspend()/spi_master_resume() from the PM callbacks. In-kernel users will receive an -ESHUTDOWN error while system suspend/resume is in progress. Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> [geert: Cleanup, reword] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * spi: gpio: Fix copy-and-paste errorLinus Walleij2018-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This fixes an embarrassing copy-and-paste error in the errorpath of spi_gpio_request(): we were checking the wrong struct member for error code right after retrieveing the sck GPIO. Fixes: 9b00bc7b901ff672 ("spi: spi-gpio: Rewrite to use GPIO descriptors") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: tegra20-slink: explicitly enable/disable clockMarcel Ziswiler2018-09-031-8/+23
| | | | | | | | | | | | | | | | | | | | | | Depending on the SPI instance one may get an interrupt storm upon requesting resp. interrupt unless the clock is explicitly enabled beforehand. This has been observed trying to bring up instance 4 on T20. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | Merge tag 'spi-fix-v4.19-rc4' of ↵Greg Kroah-Hartman2018-09-172-2/+17
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark writes: "spi: Fixes for v4.19 As well as one driver fix there's a couple of fixes here which address issues with the use of IDRs for allocation of dynamic bus numbers, ensuring that dynamic bus numbers interact well with static bus numbers assigned via DT and otherwise." * tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE spi: Fix double IDR allocation with DT aliases spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
| * spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODEAngelo Dureghello2018-08-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the dspi_eoq_write function used by the ColdFire mcf5441x family. The 16 bit cmd part must be re-set at each data transfer. Also, now that fifo_size variables are used for eoq_read/write, a proper fifo size must be set (16 slots for the ColdFire dspi module version). Signed-off-by: Angelo Dureghello <angelo@sysam.it> Acked-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * spi: Fix double IDR allocation with DT aliasesGeert Uytterhoeven2018-08-281-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the SPI bus number is provided by a DT alias, idr_alloc() is called twice, leading to: WARNING: CPU: 1 PID: 1 at drivers/spi/spi.c:2179 spi_register_controller+0x11c/0x5d8 couldn't get idr Fix this by moving the handling of fixed SPI bus numbers up, before the DT handling code fills in ctlr->bus_num. Fixes: 1a4327fbf4554d5b ("spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbersKirill Kapranov2018-08-151-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On systems where some controllers get a dynamic ID assigned and some have a fixed number (e.g. from ACPI tables), the current implementation might run into an IDR collision: in case of a fixed bus number is gotten by a driver (but not marked busy in IDR tree) and a driver with dynamic bus number gets the same ID and predictably fails. Fix this by means of checking-in fixed IDsin IDR as far as dynamic ones at the moment of the controller registration. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | Merge tag 'hwlock-v4.19' of git://github.com/andersson/remoteprocLinus Torvalds2018-08-181-7/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull hwspinlock updates from Bjorn Andersson: "This introduces devres helpers and an API to request a lock by name, then migrates the sprd SPI driver to use these" * tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc: hwspinlock: Fix incorrect return pointers spi: sprd: Change to use devm_hwspin_lock_request_specific() spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname() hwspinlock: Fix one comment mistake hwspinlock: Remove redundant config hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller hwspinlock: Add devm_xxx() APIs to request/free hwlock hwspinlock: Add one new API to support getting a specific hwlock by the name
| * | spi: sprd: Change to use devm_hwspin_lock_request_specific()Baolin Wang2018-06-261-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Change to use devm_hwspin_lock_request_specific() instead of freeing the hwlock explicitly when unbound the device. Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| * | spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()Baolin Wang2018-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the hwlock core has supplied new function to get a specific hwlock id by one hwlock name, which is more clear for users. So change to use of_hwspin_lock_get_id_byname(). Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* | | Merge branch 'spi-4.19' into spi-nextMark Brown2018-08-1020-350/+1121
|\ \ \ | | |/ | |/|
| * | spi: spi-mem: Extend the SPI mem interface to set a custom memory nameFrieder Schrempf2018-08-021-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When porting (Q)SPI controller drivers from the MTD layer to the SPI layer, the naming scheme for the memory devices changes. To be able to keep compatibility with the old drivers naming scheme, a name field is added to struct spi_mem and a hook is added to let controller drivers set a custom name for the memory device. Example for the FSL QSPI driver: Name with the old driver: 21e0000.qspi, or with multiple devices: 21e0000.qspi-0, 21e0000.qspi-1, ... Name with the new driver without spi_mem_get_name: spi4.0 Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: uniphier: remove unnecessary include headersKeiji Hayashibara2018-08-021-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | This commit removed include headers of linux/of.h and linux/of_platform.h, because they are not used. Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: spi-gpio: add SPI_3WIRE supportLorenzo Bianconi2018-08-012-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPI_3WIRE support to spi-gpio controller introducing set_line_direction function pointer in spi_bitbang data structure. Spi-gpio controller has been tested using hts221 temp/rh iio sensor running in 3wire mode and lsm6dsm running in 4wire mode Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: add flags parameter to txrx_word function pointersLorenzo Bianconi2018-08-017-43/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the capability to specify the flag parameter used in bitbang_txrx_be_cpha{0,1} through the txrx_word function pointers of spi_bitbang data structure. That feature will be used to add spi-3wire support to the spi-gpio controller Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: add SPI controller driver for UniPhier SoCKeiji Hayashibara2018-08-013-0/+539
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPI controller driver implemented in Socionext UniPhier SoCs. UniPhier SoCs have two types SPI controllers; SCSSI supports a single channel, and MCSSI supports multiple channels. This driver supports SCSSI only. This controller has 32bit TX/RX FIFO with depth of eight entry, and supports the SPI master mode only. This commit is implemented in PIO transfer mode, not DMA transfer. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: img-spfi: Set device select bits for SPFI port stateIonela Voinescu2018-07-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if the chip select line is not controlled by the SPFI hardware, the device select bits need to be set to specify the chip select line in use for the hardware to know what parameters to use for the current transfer. Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: omap2-mcspi: remove several redundant variablesColin Ian King2018-07-301-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Variable count, l, mcspi and spi_cntrl are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'count' set but not used [-Wunused-but-set-variable] warning: variable 'l' set but not used [-Wunused-but-set-variable] warning: variable 'mcspi' set but not used [-Wunused-but-set-variable] warning: variable 'spi_cntrl' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: dw-mmio: add MSCC Ocelot supportAlexandre Belloni2018-07-301-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because the SPI controller deasserts the chip select when the TX fifo is empty (which may happen in the middle of a transfer), the CS should be handled by linux. Unfortunately, some or all of the first four chip selects are not muxable as GPIOs, depending on the SoC. There is a way to bitbang those pins by using the SPI boot controller so use it to set the chip selects. At init time, it is also necessary to give control of the SPI interface to the Designware IP. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: dw: export dw_spi_set_csAlexandre Belloni2018-07-302-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Export dw_spi_set_cs so it can be used from the various IP integration modules. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: spi-fsl-espi: Log fifo counters on errorTiago Brusamarello2018-07-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | Log RX and TX fifo counters when a transfer is done and these are not zero. Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-25 11:28:35 +0000