summaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt/switch.c
Commit message (Collapse)AuthorAgeFilesLines
* thunderbolt: Add support for enhanced uni-directional TMU modeMika Westerberg2023-06-161-0/+16
| | | | | | | | | | | | This is new TMU mode introduced with the USB4 v2. This mode is simpler than the existing ones and allows all CL states as well. Enable this for all links where both side routers are v2 and keep the existing functionality for the v1 and earlier links. Currently only support the MedRes rate. We can add the HiFi rate later too if it turns out to be useful. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Announce USB4 v2 connection manager supportGil Fine2023-06-161-2/+6
| | | | | | | | Program the CMUV (Connection Manager USB4 Version) field for USB4 v2 and v1 routers according to the spec. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for USB4 v2 80 Gb/s linkGil Fine2023-06-161-57/+128
| | | | | | | | | | | | | USB4 v2 bumps the per-lane speed up to 40 Gb/s. Also the lanes are always bonded which gives 80 Gb/s symmetric link (and 120/40 Gb/s asymmetric). This updates the speed and width of routers and XDomain connections to support the Gen 4 link. For now we keep the link as is even if it is already asymmetric. While there make tb_port_set_link_width() static. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Identify USB4 v2 routersGil Fine2023-06-161-2/+3
| | | | | | | | | Add a new function usb4_switch_version() that can be used to figure out the spec version of the router and make tb_switch_is_usb4() to use it as well. Update the uevent accordingly. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Do not touch lane 1 adapter path config spaceMika Westerberg2023-06-161-1/+1
| | | | | | | | It is not required to be implemented at all because USB4 does not use lane 1 for tunneling except when aggregated with lane 0. For this reason do not try to read the path config space of USB4 lane 1 adapters. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Initialize CL states from the hardwareMika Westerberg2023-06-091-0/+4
| | | | | | | In case the boot firmware enabled any of them, read the currently configured CL states and update the router structure accordingly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Switch CL states from enum to a bitmaskMika Westerberg2023-06-091-6/+1
| | | | | | | | | This is more natural and follows the hardware register layout better. This makes it easier to see which CL states we enable (even though they should be enabled together). Rename 'clx_mask' to 'clx' everywhere as this is now always bitmask. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Move CLx support functions into clx.cMika Westerberg2023-06-091-360/+2
| | | | | | | | | | There really don't belong to switch.c so move them into their own file. As we do this rename the functions to match the conventions used elsewhere in the driver. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Introduce tb_switch_downstream_port()Gil Fine2023-06-091-12/+7
| | | | | | | | | | | | | Introduce tb_switch_downstream_port() helper function that returns the downstream port of a parent switch that is connected to the upstream port of specified switch. From now on, we use it all across the driver where applicable. While there fix a whitespace in comment and rename 'downstream' to 'down' to be consistent with the rest of the driver. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* Merge tag 'thunderbolt-for-v6.4-rc1' of ↵Greg Kroah-Hartman2023-04-191-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v6.4 merge window This includes following Thunderbolt/USB4 changes for the v6.4 merge window: - Refactoring of DROM read code paths - Convert to use SI units from units.h - A couple of cleanups All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Introduce usb4_port_sb_opcode_err_to_errno() helper thunderbolt: Make use of SI units from units.h thunderbolt: Get rid of redundant 'else' thunderbolt: Refactor DROM reading thunderbolt: use `tb_eeprom_get_drom_offset` to discover DROM offset
| * thunderbolt: Get rid of redundant 'else'Andy Shevchenko2023-03-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | thunderbolt: Call tb_check_quirks() after initializing adaptersMika Westerberg2023-03-131-2/+2
|/ | | | | | | | | In order to apply quirks based on certain adapter types move call to tb_check_quirks() happen after the adapters are initialized. This should not affect the existing quirks. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds2023-02-241-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
| * driver core: make struct device_type.uevent() take a const *Greg Kroah-Hartman2023-01-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uevent() callback in struct device_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bard Liao <yung-chuan.liao@linux.intel.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jilin Yuan <yuanjilin@cdjrlc.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: Mark Gross <markgross@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Maximilian Luz <luzmaximilian@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Cc: Sean Young <sean@mess.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Won Chung <wonchung@google.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for Thunderbolt Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | thunderbolt: Take CL states into account when waiting for link to come upMika Westerberg2023-01-171-17/+25
|/ | | | | | | | | | If CL states are enabled for the link it may be in these states too when reading the lane adapter state but it will enter CL0 as soon as there is traffic in the high-speed lanes. Upon discovery we want to make sure that is accounted as the link being up, otherwise we end up tearing down the topology with no good reason. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Use str_enabled_disabled() helperAndy Shevchenko2022-10-231-2/+3
| | | | | | | Use str_enabled_disabled() helper instead of open coding the same. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* Merge tag 'usb-6.1-rc1' of ↵Linus Torvalds2022-10-071-226/+223
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1. Nothing major in here, lots of little things with new devices supported and updates for a few drivers. Highlights include: - thunderbolt/USB4 devices supported a bit better than before, and some new ids to enable new hardware devices - USB gadget uvc updates for newer video formats and better v4l integration (the v4l portions were acked by those maintainers) - typec updates for tiny issues and more typec drivers for new chips. - xhci tiny updates for minor issues - big usb-serial ftdi_sio driver update to handle new devices better - lots of tiny dwc3 fixes and updates for the IP block that is showing up everywhere these days - dts updates for new devices being supported - other tiny janitorial and cleanups fixes for lots of different USB drivers. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: gadget: uvc: don't put item still in use usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video() usb: host: ehci-exynos: switch to using gpiod API Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present" Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"" dt-bindings: usb: Convert FOTG210 to dt schema usb: mtu3: fix failed runtime suspend in host only mode USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl" usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra usb: typec: Replace custom implementation of device_match_fwnode() usb: typec: ucsi: Don't warn on probe deferral usb: add quirks for Lenovo OneLink+ Dock MAINTAINERS: switch dwc3 to Thinh usb: idmouse: fix an uninit-value in idmouse_open USB: PHY: JZ4770: Switch to use dev_err_probe() helper usb: phy: generic: Switch to use dev_err_probe() helper usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs usb: cdns3: remove dead code usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair usb: musb: sunxi: Switch to use dev_err_probe() helper ...
| * Merge tag 'thunderbolt-for-v6.1-rc1' of ↵Greg Kroah-Hartman2022-09-301-226/+223
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: "thunderbolt: Changes for v6.1 merge window This includes following Thunderbolt/USB4 changes for the v6.1 merge window: - Support for Intel Meteor Lake integrated Thunderbolt/USB4 controller - Support for ASMedia USB4 controller NVM firmware upgrade - Receiver lane margining support - Few fixes and cleanups. All these have been in linux-next with no reported issues." * tag 'thunderbolt-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Explicitly enable lane adapter hotplug events at startup thunderbolt: Use dev_err_probe() thunderbolt: Convert to use sysfs_emit()/sysfs_emit_at() APIs thunderbolt: Fix spelling mistake "simultaneusly" -> "simultaneously" thunderbolt: debugfs: Fix spelling mistakes in seq_puts text thunderbolt: Add support for ASMedia NVM image format thunderbolt: Move vendor specific NVM handling into nvm.c thunderbolt: Provide tb_retimer_nvm_read() analogous to tb_switch_nvm_read() thunderbolt: Rename and make nvm_read() available for other files thunderbolt: Extend NVM version fields to 32-bits thunderbolt: Allow NVM upgrade of USB4 host routers thunderbolt: Add support for receiver lane margining thunderbolt: Add helper to check if CL states are enabled on port thunderbolt: Pass CL state bitmask to tb_port_clx_supported() thunderbolt: Move port CL state functions into correct place in switch.c thunderbolt: Move tb_xdomain_parent() to tb.h thunderbolt: Add support for Intel Meteor Lake thunderbolt: Add comment where Thunderbolt 4 PCI IDs start thunderbolt: Add DP OUT resource when DP tunnel is discovered
| | * thunderbolt: Explicitly enable lane adapter hotplug events at startupMario Limonciello2022-09-261-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Software that has run before the USB4 CM in Linux runs may have disabled hotplug events for a given lane adapter. Other CMs such as that one distributed with Windows 11 will enable hotplug events. Do the same thing in the Linux CM which fixes hotplug events on "AMD Pink Sardine". Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| | * thunderbolt: Convert to use sysfs_emit()/sysfs_emit_at() APIsAndy Shevchenko2022-09-241-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. While at it, use Elvis operator in some cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| | * thunderbolt: Move vendor specific NVM handling into nvm.cSzuying Chen2022-09-071-92/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As there will be more USB4 devices that support NVM firmware upgrade from various vendors, it makes sense to split out the Intel specific NVM image handling from the generic code. This moves the Intel specific NVM handling into a new structure that will be matched by the device type and the vendor ID. Do this for both routers and retimers. This makes it easier to extend the NVM support to cover new vendors and NVM image formats in the future. Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| | * thunderbolt: Rename and make nvm_read() available for other filesSzuying Chen2022-09-071-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support non-Intel NVM formats the vendor specific NVM validation code that will live in nvm.c needs to be able to read various parts of the NVM so make the function available outside of switch.c and rename it accordingly. Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| | * thunderbolt: Extend NVM version fields to 32-bitsSzuying Chen2022-09-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support non-Intel NVM image formats extend the NVM major and minor version to 32-bits to better accommondate different versioning schemes. No functional impact. Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| | * thunderbolt: Add helper to check if CL states are enabled on portMika Westerberg2022-09-051-0/+28
| | | | | | | | | | | | | | | | | | We will need this when enabling lane margining support. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| | * thunderbolt: Pass CL state bitmask to tb_port_clx_supported()Mika Westerberg2022-09-051-11/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of testing just a single CL state we can pass a bitmask of states to check. This makes it simpler for callers of the function. We also add a check for CL2 even though not fully supported by the driver yet. Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| | * thunderbolt: Move port CL state functions into correct place in switch.cMika Westerberg2022-09-051-106/+106
| | | | | | | | | | | | | | | | | | | | | They should be close to other functions dealing with USB4 ports. No functional impact. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | | thunderbolt: Explicitly reset plug events delay back to USB4 spec valueMario Limonciello2022-09-221-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | If any software has interacted with the USB4 registers before the Linux USB4 CM runs, it may have modified the plug events delay. It has been observed that if this value too large, it's possible that hotplugged devices will negotiate a fallback mode instead in Linux. To prevent this, explicitly align the plug events delay with the USB4 spec value of 10ms. Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* / thunderbolt: Check router generation before connecting xHCIMika Westerberg2022-08-181-1/+5
|/ | | | | | | | | | | Only Thunderbolt 3 routers need the xHCI connection flow. This also ensures the router actually has both lane adapters (1 and 3). While there move declaration of the boolean variables inside the block where they are being used. Fixes: 30a4eca69b76 ("thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add CL1 support for USB4 and Titan Ridge routersGil Fine2022-06-061-43/+46
| | | | | | | | | | | | In this patch we add support for a second low power state of the link: CL1. Low power states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. We enable it, if both sides of the link support it, and only for the first hop router (i.e. the first device that connected to the host router). This is needed for better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Fix typos in CLx enablingGil Fine2022-06-061-1/+1
| | | | | | | Fix few typos in CLx enabling. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: CLx disable before system suspend only if previously enabledGil Fine2022-06-061-2/+4
| | | | | | | Disable CLx before system suspended only if previously was enabled. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Ignore port locked error in tb_port_wait_for_link_width()Mika Westerberg2022-05-051-3/+10
| | | | | | | | | Sometimes when polling for the port after target link width is changed we get back port locked notification (because the link actually was reset and then re-trained). Instead of bailing out we can ignore these when polling for the width change as this is expected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Split setting link width and lane bonding into own functionsMika Westerberg2022-05-051-14/+72
| | | | | | | | | | | | | When bonding lanes over XDomain the host that has "higher" UUID triggers link re-train for bonding, and the host that has "lower" UUID just waits for this to happen. To support this split setting the link width and triggering the actual bonding a separate functions that can be called as needed. While there remove duplicated empty line in the kernel-doc comment of tb_port_lane_bonding_disable(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add debug logging when lane is enabled/disabledMika Westerberg2022-05-051-2/+8
| | | | | | This is useful when debugging possible issues. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Do not make DROM read success compulsoryMario Limonciello2022-03-041-4/+2
| | | | | | | | | | | | | | The USB4 specification doesn't make any requirements that reading a device router's DROM is needed for the operation of the device. Other connection manager solutions don't necessarily read it or gate the usability of the device on whether it was read. So make failures when reading the DROM show warnings but not fail the initialization of the router. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Do not resume routers if UID is not setMario Limonciello2022-03-041-0/+4
| | | | | | | | | | | | | | | | | | Routers might not have a UID set if the DROM read failed during initialization previously. Normally upon resume the UID is re-read to confirm it's the same device connected. * If the DROM read failed during init but then succeeded during resume it could either be a new device or faulty device * If the DROM read failed during init and also failed during resume it might be a different device plugged in all together. Detect this situation and prevent re-using the same configuration in these cirucmstances. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devicesMika Westerberg2022-02-021-1/+70
| | | | | | | | | Both Alpine Ridge and Titan Ridge require special flows in order to activate the internal xHCI controller when there is USB device connected to the downstream type-C port. This implements the missing flows for both. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add module parameter for CLx disablingGil Fine2021-12-281-0/+11
| | | | | | | | Add a module parameter that allows user to completely disable CLx functionality in case problems are found. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Enable CL0s for Intel Titan RidgeGil Fine2021-12-281-3/+157
| | | | | | | | | | | Low power link states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. The simplest one being called CL0s. Follow what we already do for USB4 device routers and enable CL0s for Intel Titan Ridge device router too. This allows better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Implement TMU time disruption for Intel Titan RidgeGil Fine2021-12-221-0/+4
| | | | | | | | | Intel Titan Ridge based routers have slightly different flow for time disruption than USB4 compliant routers. This makes it work on Titan Ridge too. Needed to enable link low power states on Titan Ridge. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Move usb4_switch_wait_for_bit() to switch.cGil Fine2021-12-221-0/+34
| | | | | | | | | Currently usb4_switch_wait_for_bit() used only in usb4.c Moving to switch.c to call it from other files. Also change the prefix to "tb_" to follow to the naming convention. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add CL0s support for USB4 routersGil Fine2021-12-221-0/+263
| | | | | | | | | | | | | In this patch we add enabling of CL0s - a low power state of the link. Low power states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. For now, we add support only for first low power state: CL0s. We enable it, if both sides of the link support it, and only for the first hop router. (i.e. the first device that connected to the host router). This is needed for better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add debug logging of DisplayPort resource allocationMika Westerberg2021-12-071-2/+15
| | | | | | Add more debugging around DP resource allocation/de-allocation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Do not program path HopIDs for USB4 routersMika Westerberg2021-12-071-1/+6
| | | | | | | | These fields are marked read-only for USB4 routers so do not touch them in that case. Update the kernel-doc of tb_dp_port_set_hops() to reflect this too. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Do not allow subtracting more NFC credits than configuredMika Westerberg2021-12-071-0/+3
| | | | | | | | This might happen if the boot firmware uses different amount of NFC credits than what the router suggests, or we are dealing with pre-USB4 device. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* Merge tag 'thunderbolt-for-v5.15-rc1' of ↵Greg Kroah-Hartman2021-08-241-9/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.15 merge window This includes following Thunderbolt/USB4 changes for the v5.15 merge window: * Include authorized value in the KOBJ_CHANGE event of a device router * A couple of improvements to get the driver working also with the AMD USB4 host controller. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Fix port linking by checking all adapters thunderbolt: Do not read control adapter config space thunderbolt: Handle ring interrupt by reading interrupt status register thunderbolt: Add vendor specific NHI quirk for auto-clearing interrupt status thunderbolt: Add authorized value to the KOBJ_CHANGE uevent
| * thunderbolt: Fix port linking by checking all adaptersSanjay R Mehta2021-08-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In tb_switch_default_link_ports(), while linking of ports, only odd-numbered ports (1,3,5..) are considered and even-numbered ports are not considered. AMD host router has lane adapters at 2 and 3 and link ports at adapter 2 is not considered due to which lane bonding gets disabled. Hence added a fix such that all ports are considered during linking of ports. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * thunderbolt: Do not read control adapter config spaceSanjay R Mehta2021-08-091-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapter 0 is the control adapter and as per USB4 spec in section 2.2.6.2 control Adapters do not have an adapter configuration space. For this reason skip reading adapter config space in tb_port_init() when the port number is 0. This actually simplifies the rest of the function as we don't need to check for the port->port == 0 anymore. While there drop the extra empty line at the end of the function. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
| * thunderbolt: Add authorized value to the KOBJ_CHANGE ueventRajat Jain2021-08-021-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For security reasons, we would like to monitor and track when the Thunderbolt devices are authorized and deauthorized (i.e. when the Thunderbolt sysfs "authorized" attribute changes). Currently the userspace gets a udev change notification when there is a change, but the state may have changed (again) by the time we look at the authorized attribute in sysfs. So an authorization event may go unnoticed. Thus make it easier by informing the actual change (new value of authorized attribute) in the udev change notification. The change is included as a key value "authorized=<val>" where <val> is the new value of sysfs attribute "authorized", and is described at Documentation/ABI/testing/sysfs-bus-thunderbolt under /sys/bus/thunderbolt/devices/.../authorized. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* | Revert "thunderbolt: Hide authorized attribute if router does not support ↵Mika Westerberg2021-07-271-14/+1
|/ | | | | | | | | | | | | | | | | | | | PCIe tunnels" This reverts commit 6f3badead6a078cf3c71f381f9d84ac922984a00. It turns out bolt depends on having authorized attribute visible under each device. Hiding it makes bolt crash as several people have reported on various bug trackers. For this reason revert the commit. Link: https://gitlab.freedesktop.org/bolt/bolt/-/issues/174 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1979765 Link: https://bugs.archlinux.org/task/71569 Cc: stable@vger.kernel.org Cc: Christian Kellner <ckellner@redhat.com> Fixes: 6f3badead6a0 ("thunderbolt: Hide authorized attribute if router does not support PCIe tunnels") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210727142501.27476-1-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-08 13:13:29 +0000