summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/imx.c
Commit message (Collapse)AuthorAgeFilesLines
* tty: serial: imx: Fix broken RS485Rickard x Andersson2024-03-021-4/+18
| | | | | | | | | | | | | | | | | | | | | When about to transmit the function imx_uart_start_tx is called and in some RS485 configurations this function will call imx_uart_stop_rx. The problem is that imx_uart_stop_rx will enable loopback in order to release the RS485 bus, but when loopback is enabled transmitted data will just be looped to RX. This patch fixes the above problem by not enabling loopback when about to transmit. This driver now works well when used for RS485 half duplex master configurations. Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable <stable@kernel.org> Signed-off-by: Rickard x Andersson <rickaran@axis.com> Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Link: https://lore.kernel.org/r/20240221115304.509811-1-rickaran@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: core, imx: do not set RS485 enabled if it is not supportedLino Sanfilippo2024-01-041-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the imx driver cannot support RS485 it nullifies the ports rs485_supported structure. But it still calls uart_get_rs485_mode() which may set the RS485_ENABLED flag nevertheless. This may lead to an attempt to configure RS485 even if it is not supported when the flag is evaluated in uart_configure_port() at port startup. Avoid this by bailing out of uart_get_rs485_mode() if the RS485_ENABLED flag is not supported by the caller. With this fix a check for RTS availability is now obsolete in the imx driver, since it can not evaluate to true any more. So remove this check. Furthermore the explicit nullifcation of rs485_supported is not needed, since the memory has already been set to zeros at allocation. So remove this, too. Fixes: 00d7a00e2a6f ("serial: imx: Fill in rs485_supported") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-6-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Do not hold the port lock when setting rx-during-tx GPIOLino Sanfilippo2024-01-041-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Both the imx and stm32 driver set the rx-during-tx GPIO in rs485_config(). Since this function is called with the port lock held, this can be a problem in case that setting the GPIO line can sleep (e.g. if a GPIO expander is used which is connected via SPI or I2C). Avoid this issue by moving the GPIO setting outside of the port lock into the serial core and thus making it a generic feature. Also with commit c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") the SER_RS485_RX_DURING_TX flag is only set if a rx-during-tx GPIO is _not_ available, which is wrong. Fix this, too. Furthermore reset old GPIO settings in case that changing the RS485 configuration failed. Fixes: c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") Fixes: ca530cfa968c ("serial: imx: Add support for RS485 RX_DURING_TX output GPIO") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Ensure that imx_uart_rs485_config() is called with enabled clockChristoph Niedermaier2024-01-041-11/+12
| | | | | | | | | | | | | | | | | | | | | There are register accesses in the function imx_uart_rs485_config(). The clock must be enabled for these accesses. This was ensured by calling it via the function uart_rs485_config() in the probe() function within the range where the clock is enabled. With the commit 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") it was removed from the probe() function and is now only called through the function uart_add_one_port() which is located at the end of the probe() function. But the clock is already switched off in this area. To ensure that the clock is enabled during register access, move the disabling of the clock to the very end of the probe() function. To avoid leaking enabled clocks on error also add an error path for exiting with disabling the clock. Fixes: 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") Cc: stable <stable@kernel.org> Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20231226113647.39376-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Correct clock error message in function probe()Christoph Niedermaier2024-01-041-1/+1
| | | | | | | | | | Correct the clock error message by changing the clock name. Fixes: 1e512d45332b ("serial: imx: add error messages when .probe fails") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231224093209.2612-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: fix tx statemachine deadlockPaul Geurts2023-12-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | When using the serial port as RS485 port, the tx statemachine is used to control the RTS pin to drive the RS485 transceiver TX_EN pin. When the TTY port is closed in the middle of a transmission (for instance during userland application crash), imx_uart_shutdown disables the interface and disables the Transmission Complete interrupt. afer that, imx_uart_stop_tx bails on an incomplete transmission, to be retriggered by the TC interrupt. This interrupt is disabled and therefore the tx statemachine never transitions out of SEND. The statemachine is in deadlock now, and the TX_EN remains low, making the interface useless. imx_uart_stop_tx now checks for incomplete transmission AND whether TC interrupts are enabled before bailing to be retriggered. This makes sure the state machine handling is reached, and is properly set to WAIT_AFTER_SEND. Fixes: cb1a60923609 ("serial: imx: implement rts delaying for rs485") Signed-off-by: Paul Geurts <paul_geurts@live.nl> Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Tested-by: Eberhard Stoll <eberhard.stoll@gmx.de> Link: https://lore.kernel.org/r/AM0PR09MB26758F651BC1B742EB45775995B8A@AM0PR09MB2675.eurprd09.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: convert not to use dma_request_slave_channel()Christophe JAILLET2023-11-231-6/+11
| | | | | | | | | | | dma_request_slave_channel() is deprecated. dma_request_chan() should be used directly instead. Switch to the preferred function and update the error handling accordingly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/a46b493c6b5cfa09417e3e138e304fd01b61e748.1700410346.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Convert to platform remove callback returning voidUwe Kleine-König2023-11-231-4/+2
| | | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231110152927.70601-18-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Put DMA enabled UART in separate lock subclassSascha Hauer2023-10-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lockdep complains about possible circular locking dependencies when the i.MX SDMA driver issues console messages under its spinlock. While the SDMA driver calls back into the UART when issuing a message, the i.MX UART driver will never call back into the SDMA driver for this UART, because DMA is explicitly not used for UARTs providing the console. To avoid the lockdep warnings put the UART port lock for console devices into a separate subclass. This fixes possible deadlock warnings like the following which was provoked by adding a printk to the i.MX SDMA driver at a place where the driver holds its spinlock. ====================================================== WARNING: possible circular locking dependency detected 6.6.0-rc3-00045-g517852be693b-dirty #110 Not tainted ------------------------------------------------------ swapper/0/0 is trying to acquire lock: c1818e04 (console_owner){-...}-{0:0}, at: console_flush_all+0x1c4/0x634 but task is already holding lock: c44649e0 (&vc->lock){-...}-{3:3}, at: sdma_int_handler+0xc4/0x368 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&vc->lock){-...}-{3:3}: _raw_spin_lock_irqsave+0x4c/0x68 sdma_prep_dma_cyclic+0x1a8/0x21c imx_uart_startup+0x44c/0x5d4 uart_startup+0x120/0x2b0 uart_port_activate+0x44/0x98 tty_port_open+0x80/0xd0 uart_open+0x18/0x20 tty_open+0x120/0x664 chrdev_open+0xc0/0x214 do_dentry_open+0x1d0/0x544 path_openat+0xbb0/0xea0 do_filp_open+0x5c/0xd4 do_sys_openat2+0xb8/0xf0 sys_openat+0x8c/0xd8 ret_fast_syscall+0x0/0x1c -> #1 (&port_lock_key){-.-.}-{3:3}: _raw_spin_lock_irqsave+0x4c/0x68 imx_uart_console_write+0x164/0x1a0 console_flush_all+0x220/0x634 console_unlock+0x64/0x164 vprintk_emit+0xb0/0x390 vprintk_default+0x24/0x2c _printk+0x2c/0x5c register_console+0x244/0x478 serial_core_register_port+0x5c4/0x618 imx_uart_probe+0x4e0/0x7d4 platform_probe+0x58/0xb0 really_probe+0xc4/0x2e0 __driver_probe_device+0x84/0x1a0 driver_probe_device+0x2c/0x108 __driver_attach+0x94/0x17c bus_for_each_dev+0x7c/0xd0 bus_add_driver+0xc4/0x1cc driver_register+0x7c/0x114 imx_uart_init+0x20/0x40 do_one_initcall+0x7c/0x3c4 kernel_init_freeable+0x17c/0x228 kernel_init+0x14/0x140 ret_from_fork+0x14/0x24 -> #0 (console_owner){-...}-{0:0}: __lock_acquire+0x14b0/0x29a0 lock_acquire.part.0+0xb4/0x264 console_flush_all+0x20c/0x634 console_unlock+0x64/0x164 vprintk_emit+0xb0/0x390 vprintk_default+0x24/0x2c _printk+0x2c/0x5c sdma_int_handler+0xcc/0x368 __handle_irq_event_percpu+0x94/0x2d0 handle_irq_event+0x38/0xd0 handle_fasteoi_irq+0x98/0x248 handle_irq_desc+0x1c/0x2c gic_handle_irq+0x6c/0x90 generic_handle_arch_irq+0x2c/0x64 __irq_svc+0x90/0xbc cpuidle_enter_state+0x1a0/0x4f4 cpuidle_enter+0x30/0x40 do_idle+0x210/0x2b4 cpu_startup_entry+0x28/0x2c rest_init+0xd0/0x184 arch_post_acpi_subsys_init+0x0/0x8 other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &vc->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&vc->lock); lock(&port_lock_key); lock(&vc->lock); lock(console_owner); *** DEADLOCK *** 3 locks held by swapper/0/0: #0: c44649e0 (&vc->lock){-...}-{3:3}, at: sdma_int_handler+0xc4/0x368 #1: c1818d50 (console_lock){+.+.}-{0:0}, at: vprintk_default+0x24/0x2c #2: c1818d08 (console_srcu){....}-{0:0}, at: console_flush_all+0x44/0x634 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.6.0-rc3-00045-g517852be693b-dirty #110 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x60/0x90 dump_stack_lvl from check_noncircular+0x184/0x1b8 check_noncircular from __lock_acquire+0x14b0/0x29a0 __lock_acquire from lock_acquire.part.0+0xb4/0x264 lock_acquire.part.0 from console_flush_all+0x20c/0x634 console_flush_all from console_unlock+0x64/0x164 console_unlock from vprintk_emit+0xb0/0x390 vprintk_emit from vprintk_default+0x24/0x2c vprintk_default from _printk+0x2c/0x5c _printk from sdma_int_handler+0xcc/0x368 sdma_int_handler from __handle_irq_event_percpu+0x94/0x2d0 __handle_irq_event_percpu from handle_irq_event+0x38/0xd0 handle_irq_event from handle_fasteoi_irq+0x98/0x248 handle_fasteoi_irq from handle_irq_desc+0x1c/0x2c handle_irq_desc from gic_handle_irq+0x6c/0x90 gic_handle_irq from generic_handle_arch_irq+0x2c/0x64 generic_handle_arch_irq from __irq_svc+0x90/0xbc Exception stack(0xc1801ee8 to 0xc1801f30) 1ee0: ffffffff ffffffff 00000001 00030349 00000000 00000012 1f00: 00000000 d7e45f4b 00000012 00000000 d7e16d63 c1810828 00000000 c1801f38 1f20: c108125c c1081260 60010013 ffffffff __irq_svc from cpuidle_enter_state+0x1a0/0x4f4 cpuidle_enter_state from cpuidle_enter+0x30/0x40 cpuidle_enter from do_idle+0x210/0x2b4 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from rest_init+0xd0/0x184 rest_init from arch_post_acpi_subsys_init+0x0/0x8 Reported-by: Tim van der Staaij <Tim.vanderstaaij@zigngroup.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230928064320.711603-1-s.hauer@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Use port lock wrappersThomas Gleixner2023-09-181-42/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-30-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Simplify compatibility handlingUwe Kleine-König2023-09-181-23/+17
| | | | | | | | | | | | | | | | | | | Three of the four entries of imx_uart_devdata[] use .uts_reg = IMX21_UTS. The difference in the .devtype member isn't relevant, the only thing that matters is if is equal to IMX1_UART. So use an entry with .devtype = IMX21_UART on all platforms but i.MX1. There is no need to have the dev types in an array, so split them up in two separate variables. The fsl,imx53-uart devinfo can go away because in the binding and also the dts files all fsl,imx53-uart devices also are compatible to fsl,imx21-uart. That's not the case for fsl,imx6q-uart (which is a bit strange IMHO), so the fsl,imx6q-uart must stay around. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230911085451.628798-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Use devm_platform_get_and_ioremap_resource()Yangtao Li2023-07-251-2/+1
| | | | | | | | | | Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230712062853.11007-14-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Explicitly include correct DT includesRob Herring2023-07-251-1/+0
| | | | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # for imx Link: https://lore.kernel.org/r/20230724205440.767071-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: imx: fix rs485 rx after txMartin Fuzzey2023-06-191-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") RS485 reception no longer works after a transmission. The following scenario shows the problem: 1) Open a port in RS485 mode 2) Receive data from remote (OK) 3) Transmit data to remote (OK) 4) Receive data from remote (Nothing received) In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx(). Since the above commit imx_uart_stop_rx() now sets the loopback bit but imx_uart_start_rx() does not clear it causing the hardware to remain in loopback mode and not receive external data. Fix this by moving the existing loopback disable code to a helper function and calling it from imx_uart_start_rx() too. Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable@vger.kernel.org Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Make uart_remove_one_port() return voidUwe Kleine-König2023-05-131-1/+3
| | | | | | | | | | | | | | | The return value is only ever used as a return value for remove callbacks of platform drivers. This return value is ignored by the driver core. (The only effect is an error message, but uart_remove_one_port() already emitted one in this case.) So the return value isn't used at all and uart_remove_one_port() can be changed to return void without any loss. Also this better matches the Linux device model as remove functions are not supposed to fail. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230512173810.131447-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: remove unused imx_uart_is_imx* functionsTom Rix2023-03-291-14/+0
| | | | | | | | | | | | | | | | | | | | | | clang with W=1 reports drivers/tty/serial/imx.c:292:19: error: unused function 'imx_uart_is_imx21' [-Werror,-Wunused-function] static inline int imx_uart_is_imx21(struct imx_port *sport) ^ drivers/tty/serial/imx.c:297:19: error: unused function 'imx_uart_is_imx53' [-Werror,-Wunused-function] static inline int imx_uart_is_imx53(struct imx_port *sport) ^ drivers/tty/serial/imx.c:302:19: error: unused function 'imx_uart_is_imx6q' [-Werror,-Wunused-function] static inline int imx_uart_is_imx6q(struct imx_port *sport) ^ These static functions are not used, so remove them. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230317205710.1672232-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Use of_property_read_bool() for boolean propertiesRob Herring2023-03-161-9/+5
| | | | | | | | | | | | It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230310144727.1545699-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Use of_property_present() for testing DT property presenceRob Herring2023-03-161-2/+1
| | | | | | | | | | | | | | It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230310144727.1545630-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Drop a few unneeded castsUwe Kleine-König2023-03-091-11/+6
| | | | | | | | | | | | There is no point in casting a struct uart_port to a struct imx_port just to access the first member of the latter (a struct uart_port). This introduces no code changes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230302115417.1860210-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: remove a redundant checkTom Rix2023-02-161-5/+3
| | | | | | | | | | | | | | | | | | | | cpp_check reports drivers/tty/serial/imx.c:1207:15: style: Condition 'r_bytes>0' is always true [knownConditionTrueFalse] if (r_bytes > 0) { r_byte is set to r_bytes = rx_ring->head - rx_ring->tail; The head - tail calculation is also done by the earlier check if (rx_ring->head <= sg_dma_len(sgl) && rx_ring->head > rx_ring->tail) { so r_bytes will always be > 0, so the second check is not needed. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/20230211154550.2130670-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: get rid of registers shadowingSergey Organov2023-02-081-63/+4
| | | | | | | | | | | | | Neither registers shadowing is functionally needed as all the registers are read-write, nor the shadowing makes much sense for speed-up, as most speed critical reads/writes (of data Rx/Tx registers) are not shadowed anyway. Moreover, the shadowing code is obviously pure overhead on the write path. Get rid of the shadowing code and variables due to above considerations. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201141603.4205-1-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: refine local variables in rxint()Sergey Organov2023-02-081-3/+2
| | | | | | | | | | | The 'rx' is chip register, similar to 'usr2', so let it be of 'u32' type as well. Move 'flg' to be FIFO read loop local as it's not used outside. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-8-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: stop using USR2 in FIFO reading loopSergey Organov2023-02-081-12/+6
| | | | | | | | | | The chip provides all the needed bits in the URXD0 register that we read anyway for data, so get rid of reading USR2 and use only URXD0 bits instead. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-7-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: remove redundant USR2 read from FIFO reading loopSergey Organov2023-02-081-1/+0
| | | | | | | | | There is no need to read USR2 twice at every loop iteration: get rid of the second read. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-6-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: do not break from FIFO reading loop prematurelySergey Organov2023-02-081-7/+3
| | | | | | | | | | There is no reason to prematurely break out of FIFO reading loop, and it might cause needless reenters into ISR, so keep reading until FIFO is empty. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-5-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: do not sysrq broken charsSergey Organov2023-02-081-3/+2
| | | | | | | | | Do not call uart_handle_sysrq_char() if we got any receive error along with the character, as we don't want random junk to be considered a sysrq. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-4-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: work-around for hardware RX floodSergey Organov2023-02-081-28/+95
| | | | | | | | | | | | | | | | | | | | | | Check if hardware Rx flood is in progress, and issue soft reset to UART to stop the flood. A way to reproduce the flood (checked on iMX6SX) is: open iMX UART at 9600 8N1, and from external source send 0xf0 char at 115200 8N1. In about 90% of cases this starts a flood of "receiving" of 0xff characters by the iMX UART that is terminated by any activity on RxD line, or could be stopped by issuing soft reset to the UART (just stop/start of RX does not help). Note that in essence what we did here is sending isolated start bit about 2.4 times shorter than it is to be if issued on the UART configured baud rate. There was earlier attempt to fix similar issue in: 'commit b38cb7d25711 ("serial: imx: Disable new features of autobaud detection")', but apparently it only gets harder to reproduce the issue after that commit. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-3-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: factor-out common code to imx_uart_soft_reset()Sergey Organov2023-02-081-36/+37
| | | | | | | | | | | | We perform soft reset in 2 places, slightly differently for no sufficient reasons, so move more generic variant to a function, and re-use the code. Out of 2 repeat counters, 10 and 100, select 10, as the code works at interrupts disabled, and in practice the reset happens immediately. Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/20230201142700.4346-2-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: imx: disable Ageing Timer interrupt request irqPeng Fan2023-02-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There maybe pending USR interrupt before requesting irq, however uart_add_one_port has not executed, so there will be kernel panic: [ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000080 [ 0.802701] Mem abort info: [ 0.805367] ESR = 0x0000000096000004 [ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.814033] SET = 0, FnV = 0 [ 0.816950] EA = 0, S1PTW = 0 [ 0.819950] FSC = 0x04: level 0 translation fault [ 0.824617] Data abort info: [ 0.827367] ISV = 0, ISS = 0x00000004 [ 0.831033] CM = 0, WnR = 0 [ 0.833866] [0000000000000080] user address but active_mm is swapper [ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.845953] Modules linked in: [ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1 [ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT) [ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0 [ 0.872283] lr : imx_uart_int+0xf8/0x1ec The issue only happends in the inmate linux when Jailhouse hypervisor enabled. The test procedure is: while true; do jailhouse enable imx8mp.cell jailhouse cell linux xxxx sleep 10 jailhouse cell destroy 1 jailhouse disable sleep 5 done And during the upper test, press keys to the 2nd linux console. When `jailhouse cell destroy 1`, the 2nd linux has no chance to put the uart to a quiese state, so USR1/2 may has pending interrupts. Then when `jailhosue cell linux xx` to start 2nd linux again, the issue trigger. In order to disable irqs before requesting them, both UCR1 and UCR2 irqs should be disabled, so here fix that, disable the Ageing Timer interrupt in UCR2 as UCR1 does. Fixes: 8a61f0c70ae6 ("serial: imx: Disable irqs before requesting them") Suggested-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Link: https://lore.kernel.org/r/20230206013016.29352-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Make uart_handle_cts_change() status param bool activeIlpo Järvinen2023-01-191-1/+1
| | | | | | | | | | | | | | | | Convert uart_handle_cts_change() to bool which is more appropriate than unsigned int. Rename status to active to better describe what the parameter means. While at it, make the comment about the active parameter easier to parse. Cleanup callsites from operations that are not necessary with bool. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-10-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Add support for RS485 RX_DURING_TX output GPIOChristoph Niedermaier2023-01-191-2/+8
| | | | | | | | | | | | If a RX_DURING_TX GPIO is defined by the DT property "rs485-rx-during-tx-gpios" this patch switches this GPIO accordingly to the RS485 flag RX_DURING_TX in user space. In addition, the i.MX UART receiver is no longer turned on and off during sending, because now the hardware is responsible for connecting or disconnecting RX during TX controlled by this GPIO. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Link: https://lore.kernel.org/r/20221202104127.122761-3-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: serial: imx: disable the break condition when shutdown the uart portSherry Sun2023-01-191-1/+2
| | | | | | | | | | The comment in imx_uart_shutdown() says to disable the break condition, but it doesn't actually do that, here fix this by disabling UCR1_SNDBRK when closing the uart port like other uart drivers do. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20221214031137.28815-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 6.1-rc6 into tty-nextGreg Kroah-Hartman2022-11-221-0/+1
|\ | | | | | | | | | | We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * serial: imx: Add missing .thaw_noirq hookShawn Guo2022-11-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following warning is seen with non-console UART instance when system hibernates. [ 37.371969] ------------[ cut here ]------------ [ 37.376599] uart3_root_clk already disabled [ 37.380810] WARNING: CPU: 0 PID: 296 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0 ... [ 37.506986] Call trace: [ 37.509432] clk_core_disable+0xa4/0xb0 [ 37.513270] clk_disable+0x34/0x50 [ 37.516672] imx_uart_thaw+0x38/0x5c [ 37.520250] platform_pm_thaw+0x30/0x6c [ 37.524089] dpm_run_callback.constprop.0+0x3c/0xd4 [ 37.528972] device_resume+0x7c/0x160 [ 37.532633] dpm_resume+0xe8/0x230 [ 37.536036] hibernation_snapshot+0x288/0x430 [ 37.540397] hibernate+0x10c/0x2e0 [ 37.543798] state_store+0xc4/0xd0 [ 37.547203] kobj_attr_store+0x1c/0x30 [ 37.550953] sysfs_kf_write+0x48/0x60 [ 37.554619] kernfs_fop_write_iter+0x118/0x1ac [ 37.559063] new_sync_write+0xe8/0x184 [ 37.562812] vfs_write+0x230/0x290 [ 37.566214] ksys_write+0x68/0xf4 [ 37.569529] __arm64_sys_write+0x20/0x2c [ 37.573452] invoke_syscall.constprop.0+0x50/0xf0 [ 37.578156] do_el0_svc+0x11c/0x150 [ 37.581648] el0_svc+0x30/0x140 [ 37.584792] el0t_64_sync_handler+0xe8/0xf0 [ 37.588976] el0t_64_sync+0x1a0/0x1a4 [ 37.592639] ---[ end trace 56e22eec54676d75 ]--- On hibernating, pm core calls into related hooks in sequence like: .freeze .freeze_noirq .thaw_noirq .thaw With .thaw_noirq hook being absent, the clock will be disabled in a unbalanced call which results the warning above. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_thaw clk_disable_unprepare() Adding the missing .thaw_noirq hook as imx_uart_resume_noirq() will have the call sequence corrected as below and thus fix the warning. imx_uart_freeze() clk_prepare_enable() imx_uart_suspend_noirq() clk_disable() imx_uart_resume_noirq() clk_enable() imx_uart_thaw clk_disable_unprepare() Fixes: 09df0b3464e5 ("serial: imx: fix endless loop during suspend") Reviewed-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20221012121353.2346280-1-shawn.guo@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | tty: serial: imx: Handle RS485 DE signal active highMarek Vasut2022-11-031-6/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default polarity of RS485 DE signal is active high. This driver does not handle such case properly. Currently, when a pin is multiplexed as a UART CTS_B on boot, this pin is pulled HIGH by the i.MX UART CTS circuit, which activates DE signal on the RS485 transceiver and thus behave as if the RS485 was transmitting data, so the system blocks the RS485 bus when it starts and until user application takes over. This behavior is not OK. The problem consists of two separate parts. First, the i.MX UART IP requires UCR1 UARTEN and UCR2 RXEN to be set for UCR2 CTSC and CTS bits to have any effect. The UCR2 CTSC bit permits the driver to set CTS (RTS_B or RS485 DE signal) to either level sychronous to the internal UART IP clock. Compared to other options, like GPIO CTS control, this has the benefit of being synchronous to the UART IP clock and thus without glitches or bus delays. The reason for the CTS design is likely because when the Receiver is disabled, the UART IP can never indicate that it is ready to receive data by assering CTS signal, so the CTS is always pulled HIGH by default. When the port is closed by user space, imx_uart_stop_rx() clears UCR2 RXEN bit, and imx_uart_shutdown() clears UCR1 UARTEN bit. This disables UART Receiver and UART itself, and forces CTS signal HIGH, which leads to the RS485 bus being blocked because RS485 DE is incorrectly active. The proposed solution for this problem is to keep the Receiver running even after the port is closed, but in loopback mode. This disconnects the RX FIFO input from the RXD external signal, and since UCR2 TXEN is cleared, the UART Transmitter is disabled, so nothing can feed data in the RX FIFO. Because the Receiver is still enabled, the UCR2 CTSC and CTS bits still have effect and the CTS (RS485 DE) control is retained. Note that in case of RS485 DE signal active low, there is no problem and no special handling is necessary. The CTS signal defaults to HIGH, thus the RS485 is by default set to Receive and the bus is not blocked. Note that while there is the possibility to control CTS using GPIO with either CTS polarity, this has the downside of not being synchronous to the UART IP clock and thus glitchy and susceptible to slow DE switching. Second, on boot, before the UART driver probe callback is called, the driver core triggers pinctrl_init_done() and configures the IOMUXC to default state. At this point, UCR1 UARTEN and UCR2 RXEN are both still cleared, but UART CTS_B (RS485 DE) is configured as CTS function, thus the RTS signal is pulled HIGH by the UART IP CTS circuit. One part of the solution here is to enable UCR1 UARTEN and UCR2 RXEN and UTS loopback in this driver probe callback, thus unblocking the CTSC and CTS control early on. But this is still too late, since the pin control is already configured and CTS has been pulled HIGH for a short period of time. When Linux kernel boots and this driver is bound, the pin control is set to special "init" state if the state is available, and driver can switch the "default" state afterward when ready. This state can be used to set the CTS line as a GPIO in DT temporarily, and a GPIO hog can force such GPIO to LOW, thus keeping the RS485 DE line LOW early on boot. Once the driver takes over and UCR1 UARTEN and UCR2 RXEN and UTS loopback are all enabled, the driver can switch to "default" pin control state and control the CTS line as function instead. DT binding example is below: " &gpio6 { rts-init-hog { gpio-hog; gpios = <5 0>; output-low; line-name = "rs485-de"; }; }; &uart5 { /* DHCOM UART2 */ pinctrl-0 = <&pinctrl_uart5>; pinctrl-1 = <&pinctrl_uart5_init>; pinctrl-names = "default", "init"; ... }; pinctrl_uart5_init: uart5-init-grp { fsl,pins = < ... MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x30b1 >; }; pinctrl_uart5: uart5-grp { fsl,pins = < ... MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x30b1 >; }; " Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220929144400.13571-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: imx: Use uart_xmit_advance()Ilpo Järvinen2022-11-031-5/+2
|/ | | | | | | | | Take advantage of the new uart_xmit_advance() helper. Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20221019091151.6692-18-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Deassert Transmit Enable on probe in driver-specific wayLukas Wunner2022-09-251-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a UART port is newly registered, uart_configure_port() seeks to deassert RS485 Transmit Enable by setting the RTS bit in port->mctrl. However a number of UART drivers interpret a set RTS bit as *assertion* instead of deassertion: Affected drivers include those using serial8250_em485_config() (except 8250_bcm2835aux.c) and some using mctrl_gpio (e.g. imx.c). Since the interpretation of the RTS bit is driver-specific, it is not suitable as a means to centrally deassert Transmit Enable in the serial core. Instead, the serial core must call on drivers to deassert it in their driver-specific way. One way to achieve that is to call ->rs485_config(). It implicitly deasserts Transmit Enable. So amend uart_configure_port() and uart_resume_port() to invoke uart_rs485_config(). That allows removing calls to uart_rs485_config() from drivers' ->probe() hooks and declaring the function static. Skip any invocation of ->set_mctrl() if RS485 is enabled. RS485 has no hardware flow control, so the modem control lines are irrelevant and need not be touched. When leaving RS485 mode, reset the modem control lines to the state stored in port->mctrl. That way, UARTs which are muxed between RS485 and RS232 transceivers drive the lines correctly when switched to RS232. (serial8250_do_startup() historically raises the OUT1 modem signal because otherwise interrupts are not signaled on ancient PC UARTs, but I believe that no longer applies to modern, RS485-capable UARTs and is thus safe to be skipped.) imx.c modifies port->mctrl whenever Transmit Enable is asserted and deasserted. Stop it from doing that so port->mctrl reflects the RS232 line state. 8250_omap.c deasserts Transmit Enable on ->runtime_resume() by calling ->set_mctrl(). Because that is now a no-op in RS485 mode, amend the function to call serial8250_em485_stop_tx(). fsl_lpuart.c retrieves and applies the RS485 device tree properties after registering the UART port. Because applying now happens on registration in uart_configure_port(), move retrieval of the properties ahead of uart_add_one_port(). Link: https://lore.kernel.org/all/20220329085050.311408-1-matthias.schiffer@ew.tq-group.com/ Link: https://lore.kernel.org/all/8f538a8903795f22f9acc94a9a31b03c9c4ccacb.camel@ginzinger.com/ Fixes: d3b3404df318 ("serial: Fix incorrect rs485 polarity on uart open") Cc: stable@vger.kernel.org # v4.14+ Reported-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reported-by: Roosen Henri <Henri.Roosen@ginzinger.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/2de36eba3fbe11278d5002e4e501afe0ceaca039.1663863805.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Make ->set_termios() old ktermios constIlpo Järvinen2022-08-301-1/+1
| | | | | | | | | | There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Embed rs485_supported to uart_portIlpo Järvinen2022-07-081-2/+2
| | | | | | | | | | Embed rs485_supported to uart_port to allow serial core to tweak it as needed. Reviewed-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220704094515.6831-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: take termios_rwsem for ->rs485_config() & pass termios as paramIlpo Järvinen2022-06-271-1/+1
| | | | | | | | | To be able to alter ADDRB within ->rs485_config(), take termios_rwsem before calling ->rs485_config() and pass termios. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220624204210.11112-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Remove serial_rs485 sanitizationIlpo Järvinen2022-06-101-4/+0
| | | | | | | | | | The driver provides different rs485_supported for the case where RTS is not available making it unnecessary to handle it in imx_uart_rs485_config. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-32-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: imx: Fill in rs485_supportedIlpo Järvinen2022-06-101-0/+13
| | | | | | | | | | | | | | Add information on supported serial_rs485 features. In the case where RTS is lacking, RS485 cannot be enabled so provide zero rs485_supported for that case. Perhaps it would make sense to not provide rs485_config() at all in that case but such a change would have userspace visible impact/change in behavior so this patch does not attempt it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-17-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: Add uart_rs485_config()Ilpo Järvinen2022-06-101-1/+1
| | | | | | | | | | | | | | | | A few serial drivers make a call to rs485_config() themselves (all these seem to relate to init). Convert them all to use a common helper which makes it easy to make adjustments on tasks related to it as serial_rs485 struct sanitization is going to be added. In pci_fintek_setup() (in 8250_pci.c), the rs485_config() call was made with NULL, however, it can be changed to pass uart_port's rs485 struct. No other callers should pass NULL into rs485_config() so the NULL check can now be eliminated. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'tty-5.19-rc1' of ↵Linus Torvalds2022-06-031-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...
| * Merge 5.18-rc5 into tty-nextGreg Kroah-Hartman2022-05-021-1/+1
| |\ | | | | | | | | | | | | | | | We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | serial: imx: remove redundant assignment in rs485_configLino Sanfilippo2022-04-151-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In uart_set_rs485_config() the serial core already assigns the passed serial_rs485 struct to the uart port. So remove the assignment in the drivers rs485_config() function to avoid reduncancy. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20220410104642.32195-8-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'sound-5.19-rc1' of ↵Linus Torvalds2022-05-251-1/+1
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Not much dramatic changes at this time, but we've received quite a lot of changes for ASoC, while there are still a few fixes and quirks for usual HD- and USB-auido. Here are some highlights. ASoC: - Overhaul of endianness specification for data formats, avoiding needless restrictions due to CODECs - Initial stages of Intel AVS driver merge - Introduction of v4 IPC mechanism for SOF - TDM mode support for AK4613 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces, nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780 Others: - A few regression fixes after the USB-audio endpoint management refactoring - More enhancements for Cirrus HD-audio codec support (still ongoing) - Addition of generic serial MIDI driver" * tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits) ALSA: hda/realtek - Add new type for ALC245 ALSA: usb-audio: Configure sync endpoints before data ALSA: ctxfi: fix typo in comment ALSA: cs5535audio: fix typo in comment ALSA: ctxfi: Add SB046x PCI ID ALSA: usb-audio: Add missing ep_idx in fixed EP quirks ALSA: usb-audio: Workaround for clock setup on TEAC devices ALSA: lola: Bounds check loop iterator against streams array size ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv() ASoC: rt1308-sdw: add the default value of register 0xc320 ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic ASoC: rt9120: Fix 3byte read, valule offset typo ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver. ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition() ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR' ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get() ASoC: SOF: mediatek: remove duplicate include in mt8195.c ASoC: SOF: mediatek: Add mt8195 debug dump ASoC: SOF: mediatek: Add mediatek common debug dump ...
| * | dmaengine: imx: Move header to include/dma/Sascha Hauer2022-04-191-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | The i.MX DMA drivers are device tree only, nothing in include/linux/platform_data/dma-imx.h has platform_data in it, so move the file to include/linux/dma/imx-dma.h. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220414162249.3934543-10-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
* / serial: imx: fix overrun interrupts in DMA modeJohan Hovold2022-04-151-1/+1
|/ | | | | | | | | | | | | | | | | | | | | Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") accidentally enabled overrun interrupts unconditionally when deferring DMA enable until after the receiver has been enabled during startup. Fix this by using the DMA-initialised instead of DMA-enabled flag to determine whether overrun interrupts should be enabled. Note that overrun interrupts are already accounted for in imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f ("serial: imx-serial - update RX error counters when DMA is used"). Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") Cc: stable@vger.kernel.org # 4.17 Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: make uart_console_write->putchar()'s character an unsigned charJiri Slaby2022-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, uart_console_write->putchar's second parameter (the character) is of type int. It makes little sense, provided uart_console_write() accepts the input string as "const char *s" and passes its content -- the characters -- to putchar(). So switch the character's type to unsigned char. We don't use char as that is signed on some platforms. That would cause troubles for drivers which (implicitly) cast the char to u16 when writing to the device. Sign extension would happen in that case and the value written would be completely different to the provided char. DZ is an example of such a driver -- on MIPS, it uses u16 for dz_out in dz_console_putchar(). Note we do the char -> uchar conversion implicitly in uart_console_write(). Provided we do not change size of the data type, sign extension does not happen there, so the problem is void. This makes the types consistent and unified with the rest of the uart layer, which uses unsigned char in most places already. One exception is xmit_buf, but that is going to be converted later. Cc: Paul Cercueil <paul@crapouillou.net> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@orcam.me.uk> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Karol Gugala <kgugala@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <peter@korsgaard.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> [atmel_serial] Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson_serial Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-23 10:23:23 +0000