summaryrefslogtreecommitdiffstats
path: root/drivers/tty
Commit message (Collapse)AuthorAgeFilesLines
* xen/events: don't bind non-percpu VIRQs with percpu chipDavid Vrabel2015-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | commit 77bb3dfdc0d554befad58fdefbc41be5bc3ed38a upstream. A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by: David Vrabel <david.vrabel@citrix.com> [bwh: Backported to 3.2: adjust filename, context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: of-serial: Remove device_type = "serial" registrationMichal Simek2015-08-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | commit 6befa9d883385c580369a2cc9e53fbf329771f6d upstream. Do not probe all serial drivers by of_serial.c which are using device_type = "serial"; property. Only drivers which have valid compatible strings listed in the driver should be probed. When PORT_UNKNOWN is setup probe will fail anyway. Arnd quotation about driver historical background: "when I wrote that driver initially, the idea was that it would get used as a stub to hook up all other serial drivers but after that, the common code learned to create platform devices from DT" This patch fix the problem with on the system with xilinx_uartps and 16550a where of_serial failed to register for xilinx_uartps and because of irq_dispose_mapping() removed irq_desc. Then when xilinx_uartps was asking for irq with request_irq() EINVAL is returned. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: xilinx: Use platform_get_irq to get irq description structureMichal Simek2015-08-072-11/+12
| | | | | | | | | | | | | | | | | | | | commit 5c90c07b98c02198d9777a7c4f3047b0a94bf7ed upstream. For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type = "serial"; property in DT of_serial.c driver maps and unmaps IRQ (because driver probe fails). Then a driver is called but irq mapping is not created that's why driver is failing again in again on request_irq(). Based on this use platform_get_irq() instead of platform_get_resource() which is doing irq_desc allocation and driver itself can request IRQ. Fix both xilinx serial drivers in the tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust context - Return directly on failure in xuartps_probe()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* TTY: fix tty_wait_until_sent on 64-bit machinesJohan Hovold2015-05-091-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 79fbf4a550ed6a22e1ae1516113e6c7fa5d56a53 upstream. Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an infinite timeout (0) would be passed to the underlying tty-driver's wait_until_sent-operation as a negative timeout (-1), causing it to return immediately. This manifests itself for example as tcdrain() returning immediately, drivers not honouring the drain flags when setting terminal attributes, or even dropped data on close as a requested infinite closing-wait timeout would be ignored. The first symptom was reported by Asier LLANO who noted that tcdrain() returned prematurely when using the ftdi_sio usb-serial driver. Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the underlying tty driver. Note that the serial-core wait_until_sent-implementation is not affected by this bug due to a lucky chance (comparison to an unsigned maximum timeout), and neither is the cyclades one that had an explicit check for negative timeouts, but all other tty drivers appear to be affected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: ZIV-Asier Llano Palacios <asier.llano@cgglobal.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: fix up atime/mtime mess, take fourJiri Slaby2015-05-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f0bf0bd07943bfde8f5ac39a32664810a379c7d3 upstream. This problem was taken care of three times already in * b0de59b5733d18b0d1974a060860a8b5c1b36a2e (TTY: do not update atime/mtime on read/write), * 37b7f3c76595e23257f61bd80b223de8658617ee (TTY: fix atime/mtime regression), and * b0b885657b6c8ef63a46bc9299b2a7715d19acde (tty: fix up atime/mtime mess, take three) But it still misses one point. As John Paul correctly points out, we do not care about setting date. If somebody ever changes wall time backwards (by mistake for example), tty timestamps are never updated until the original wall time passes. So check the absolute difference of times and if it large than "8 seconds or so", always update the time. That means we will update immediatelly when changing time. Ergo, CAP_SYS_TIME can foul the check, but it was always that way. Thanks John for serving me this so nicely debugged. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: John Paul Perry <john_paul.perry@alcatel-lucent.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Change email address for 8250_pciRussell King2015-05-091-1/+1
| | | | | | | | | | | | commit f2e0ea861117bda073d1d7ffbd3120c07c0d5d34 upstream. I'm still receiving reports to my email address, so let's point this at the linux-serial mailing list instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: Prevent untrappable signals from malicious programPeter Hurley2015-05-091-0/+3
| | | | | | | | | | | | | | | | | | | | commit 37480a05685ed5b8e1b9bf5e5c53b5810258b149 upstream. Commit 26df6d13406d1a5 ("tty: Add EXTPROC support for LINEMODE") allows a process which has opened a pty master to send _any_ signal to the process group of the pty slave. Although potentially exploitable by a malicious program running a setuid program on a pty slave, it's unknown if this exploit currently exists. Limit to signals actually used. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Howard Chu <hyc@symas.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* vt: provide notifications on selection changesNicolas Pitre2015-05-091-1/+3
| | | | | | | | | | | | | | | commit 19e3ae6b4f07a87822c1c9e7ed99d31860e701af upstream. The vcs device's poll/fasync support relies on the vt notifier to signal changes to the screen content. Notifier invocations were missing for changes that comes through the selection interface though. Fix that. Tested with BRLTTY 5.2. Signed-off-by: Nicolas Pitre <nico@linaro.org> Cc: Dave Mielke <dave@mielke.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: samsung: wait for transfer completion before clock disableRobert Baldyga2015-02-201-0/+4
| | | | | | | | | | | | | | | | commit 1ff383a4c3eda8893ec61b02831826e1b1f46b41 upstream. This patch adds waiting until transmit buffer and shifter will be empty before clock disabling. Without this fix it's possible to have clock disabled while data was not transmited yet, which causes unproper state of TX line and problems in following data transfers. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty/vt: don't set font mappings on vc not supporting thisImre Deak2014-12-141-0/+2
| | | | | | | | | | | | | | | commit 9e326f78713a4421fe11afc2ddeac07698fac131 upstream. We can call this function for a dummy console that doesn't support setting the font mapping, which will result in a null ptr BUG. So check for this case and return error for consoles w/o font mapping support. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: this function doesn't take a lock, so doesn't need to unlock on error] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: Fix high cpu load if tty is unreleaseablePeter Hurley2014-12-141-1/+6
| | | | | | | | | | | | | | | | | | commit 37b164578826406a173ca7c20d9ba7430134d23e upstream. Kernel oops can cause the tty to be unreleaseable (for example, if n_tty_read() crashes while on the read_wait queue). This will cause tty_release() to endlessly loop without sleeping. Use a killable sleep timeout which grows by 2n+1 jiffies over the interval [0, 120 secs.) and then jumps to forever (but still killable). NB: killable just allows for the task to be rewoken manually, not to be terminated. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: Fix divide-by-zero fault in uart_get_divisor()Peter Hurley2014-12-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 547039ec502076e60034eeb79611df3433a99b7d upstream. uart_get_baud_rate() will return baud == 0 if the max rate is set to the "magic" 38400 rate and the SPD_* flags are also specified. On the first iteration, if the current baud rate is higher than the max, the baud rate is clamped at the max (which in the degenerate case is 38400). On the second iteration, the now-"magic" 38400 baud rate selects the possibly higher alternate baud rate indicated by the SPD_* flag. Since only two loop iterations are performed, the loop is exited, a kernel WARNING is generated and a baud rate of 0 is returned. Reproducible with: setserial /dev/ttyS0 spd_hi base_baud 38400 Only perform the "magic" 38400 -> SPD_* baud transform on the first loop iteration, which prevents the degenerate case from recognizing the clamped baud rate as the "magic" 38400 value. Reported-by: Robert Święcki <robert@swiecki.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* sunsab: Fix detection of BREAK on sunsab serial consoleChristopher Alexander Tobias Schulze2014-09-131-0/+9
| | | | | | | | | | | | | | | | | [ Upstream commit fe418231b195c205701c0cc550a03f6c9758fd9e ] Fix detection of BREAK on sunsab serial console: BREAK detection was only performed when there were also serial characters received simultaneously. To handle all BREAKs correctly, the check for BREAK and the corresponding call to uart_handle_break() must also be done if count == 0, therefore duplicate this code fragment and pull it out of the loop over the received characters. Patch applies to 3.16-rc6. Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: core: Preserve termios c_cflag for console resumePeter Hurley2014-09-131-0/+3
| | | | | | | | | | | | | | | | | | | | | commit ae84db9661cafc63d179e1d985a2c5b841ff0ac4 upstream. When a tty is opened for the serial console, the termios c_cflag settings are inherited from the console line settings. However, if the tty is subsequently closed, the termios settings are lost. This results in a garbled console if the console is later suspended and resumed. Preserve the termios c_cflag for the serial console when the tty is shutdown; this reflects the most recent line settings. Fixes: Bugzilla #69751, 'serial console does not wake from S3' Reported-by: Valerio Vanni <valerio.vanni@inwind.it> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: tty_struct::termios is a pointer] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* drivers/tty/hvc: don't free hvc_console_setup after initTomoki Sekiyama2014-06-091-1/+1
| | | | | | | | | | | | | | commit 501fed45b7e8836ee9373f4d31e2d85e3db6103a upstream. When 'console=hvc0' is specified to the kernel parameter in x86 KVM guest, hvc console is setup within a kthread. However, that will cause SEGV and the boot will fail when the driver is builtin to the kernel, because currently hvc_console_setup() is annotated with '__init'. This patch removes '__init' to boot the guest successfully with 'console=hvc0'. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* n_tty: Fix n_tty_write crash when echoing in raw modePeter Hurley2014-05-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4291086b1f081b869c6d79e5b7441633dc3ace00 upstream. The tty atomic_write_lock does not provide an exclusion guarantee for the tty driver if the termios settings are LECHO & !OPOST. And since it is unexpected and not allowed to call TTY buffer helpers like tty_insert_flip_string concurrently, this may lead to crashes when concurrect writers call pty_write. In that case the following two writers: * the ECHOing from a workqueue and * pty_write from the process race and can overflow the corresponding TTY buffer like follows. If we look into tty_insert_flip_string_fixed_flag, there is: int space = __tty_buffer_request_room(port, goal, flags); struct tty_buffer *tb = port->buf.tail; ... memcpy(char_buf_ptr(tb, tb->used), chars, space); ... tb->used += space; so the race of the two can result in something like this: A B __tty_buffer_request_room __tty_buffer_request_room memcpy(buf(tb->used), ...) tb->used += space; memcpy(buf(tb->used), ...) ->BOOM B's memcpy is past the tty_buffer due to the previous A's tb->used increment. Since the N_TTY line discipline input processing can output concurrently with a tty write, obtain the N_TTY ldisc output_lock to serialize echo output with normal tty writes. This ensures the tty buffer helper tty_insert_flip_string is not called concurrently and everything is fine. Note that this is nicely reproducible by an ordinary user using forkpty and some setup around that (raw termios + ECHO). And it is present in kernels at least after commit d945cb9cce20ac7143c2de8d88b187f62db99bdc (pty: Rework the pty layer to use the normal buffering logic) in 2.6.31-rc3. js: add more info to the commit log js: switch to bool js: lock unconditionally js: lock only the tty->ops->write call References: CVE-2014-0196 Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: output_lock is a member of struct tty_struct] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: Set correct tty name in 'active' sysfs attributeHannes Reinecke2014-04-301-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 723abd87f6e536f1353c8f64f621520bc29523a3 upstream. The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names. There is one special-case, which is tty0. If the console is directed to it, we want 'tty0' to show up in the file, so user-space knows that the messages get forwarded to the active VT. The ->device() callback would resolve tty0, though. Hence, treat it special and don't call into the VT layer to resolve it (plymouth is known to depend on it). Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Werner Fink <werner@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: no TTY_DRIVER_UNNUMBERED_NODE case in tty_line_name()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* hvc: ensure hvc_init is only ever called once in hvc_console.cPaul Gortmaker2014-04-301-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f76a1cbed18c86e2d192455f0daebb48458965f3 upstream. Commit 3e6c6f630a5282df8f3393a59f10eb9c56536d23 ("Delay creation of khcvd thread") moved the call of hvc_init from being a device_initcall into hvc_alloc, and used a non-null hvc_driver as indication of whether hvc_init had already been called. The problem with this is that hvc_driver is only assigned a value at the bottom of hvc_init, and so there is a window where multiple hvc_alloc calls can be in progress at the same time and hence try and call hvc_init multiple times. Previously the use of device_init guaranteed that hvc_init was only called once. This manifests itself as sporadic instances of two hvc_init calls racing each other, and with the loser of the race getting -EBUSY from tty_register_driver() and hence that virtual console fails: Couldn't register hvc console driver virtio-ports vport0p1: error -16 allocating hvc for port Here we add an atomic_t to guarantee we'll never run hvc_init twice. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 3e6c6f630a52 ("Delay creation of khcvd thread") Reported-by: Jim Somerville <Jim.Somerville@windriver.com> Tested-by: Jim Somerville <Jim.Somerville@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* TTY: pmac_zilog, check existence of ports in pmz_console_init()Geert Uytterhoeven2014-04-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit dc1dc2f8a5dd863bf2e79f338fc3ae29e99c683a upstream. When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0" on the kernel command line, it crashes with: Unable to handle kernel NULL pointer dereference at virtual address (null) Oops: 00000000 PC: [<0013ad28>] __pmz_startup+0x32/0x2a0 ... Call Trace: [<002c5d3e>] pmz_console_setup+0x64/0xe4 The normal tty driver doesn't crash, because init_pmz() checks pmz_ports_count again after calling pmz_probe(). In the serial console initialization path, pmz_console_init() doesn't do this, causing the driver to crash later. Add a check for pmz_ports_count to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: n_gsm: Fix for modems with brk in modem status controlLars Poeschel2014-04-021-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | commit 3ac06b905655b3ef2fd2196bab36e4587e1e4e4f upstream. 3GPP TS 07.10 states in section 5.4.6.3.7: "The length byte contains the value 2 or 3 ... depending on the break signal." The break byte is optional and if it is sent, the length is 3. In fact the driver was not able to work with modems that send this break byte in their modem status control message. If the modem just sends the break byte if it is really set, then weird things might happen. The code for deconding the modem status to the internal linux presentation in gsm_process_modem has already a big comment about this 2 or 3 byte length thing and it is already able to decode the brk, but the code calling the gsm_process_modem function in gsm_control_modem does not encode it and hand it over the right way. This patch fixes this. Without this fix if the modem sends the brk byte in it's modem status control message the driver will hang when opening a muxed channel. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: 8250: enable UART_BUG_NOMSR for TegraStephen Warren2014-04-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3685f19e07802ec4207b52465c408f185b66490e upstream. Tegra chips have 4 or 5 identical UART modules embedded. UARTs C..E have their MODEM-control signals tied off to a static state. However UARTs A and B can optionally route those signals to/from package pins, depending on the exact pinmux configuration. When these signals are not routed to package pins, false interrupts may trigger either temporarily, or permanently, all while not showing up in the IIR; it will read as NO_INT. This will eventually lead to the UART IRQ being disabled due to unhandled interrupts. When this happens, the kernel may print e.g.: irq 68: nobody cared (try booting with the "irqpoll" option) In order to prevent this, enable UART_BUG_NOMSR. This prevents UART_IER_MSI from being enabled, which prevents the false interrupts from triggering. In practice, this is not needed under any of the following conditions: * On Tegra chips after Tegra30, since the HW bug has apparently been fixed. * On UARTs C..E since their MODEM control signals are tied to the correct static state which doesn't trigger the issue. * On UARTs A..B if the MODEM control signals are routed out to package pins, since they will then carry valid signals. However, we ignore these exceptions for now, since they are only relevant if a board actually hooks up more than a 4-wire UART, and no currently supported board does this. If we ever support a board that does, we can refine the algorithm that enables UART_BUG_NOMSR to take those exceptions into account, and/or read a flag from DT/... that indicates that the board has hooked up and pinmux'd more than a 4-wire UART. Reported-by: Olof Johansson <olof@lixom.net> # autotester Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust filename - s/port->/up->port./] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: add support for 200 v3 series Titan cardYegor Yefremov2014-04-021-0/+4
| | | | | | | | | commit 48c0247d7b7bf58abb85a39021099529df365c4d upstream. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: add support for 400 and 800 v3 series Titan cardsYegor Yefremov2014-04-021-0/+16
| | | | | | | | | | commit 1e9deb118ed76b9df89d189f27a06522a03cf743 upstream. add support for 400Hv3, 410Hv3 and 800Hv3 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: pch_uart: fix tty-kref leak in dma-rx pathJohan Hovold2013-10-261-1/+2
| | | | | | | | | | | | | | | commit 19b85cfb190eb9980eaf416bff96aef4159a430e upstream. Fix tty_kref leak when tty_buffer_request room fails in dma-rx path. Note that the tty ref isn't really needed anymore, but as the leak has always been there, fixing it before removing should makes it easier to backport the fix. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: pch_uart: fix tty-kref leak in rx-error pathJohan Hovold2013-10-261-0/+2
| | | | | | | | | | | commit fc0919c68cb2f75bb1af759315f9d7e2a9443c28 upstream. Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a deadlock when pch_uart as console") which never put its tty reference. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* powerpc/hvsi: Increase handshake timeout from 200ms to 400ms.Eugene Surovegin2013-09-101-2/+2
| | | | | | | | | | | | | | | | | | commit d220980b701d838560a70de691b53be007e99e78 upstream. This solves a problem observed in kexec'ed kernel where 200ms timeout is too short and bootconsole fails to initialize. Console did eventually become workable but much later into the boot process. Observed timeout was around 260ms, but I decided to make it a little bigger for more reliability. This has been tested on Power7 machine with Petitboot as a primary bootloader and PowerNV firmware. Signed-off-by: Eugene Surovegin <surovegin@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial/mxs-auart: increase time to wait for transmitter to become idleUwe Kleine-König2013-09-101-8/+13
| | | | | | | | | | | | | | | | | | | | | commit 079a036f4283e2b0e5c26080b8c5112bc0cc1831 upstream. Without this patch the driver waits ~1 ms for the UART to become idle. At 115200n8 this time is (theoretically) enough to transfer 11.5 characters (= 115200 bits/s / (10 Bits/char) * 1ms). As the mxs-auart has a fifo size of 16 characters the clock is gated too early. The problem is worse for lower baud rates. This only happens to really shut down the transmitter in the middle of a transfer if /dev/ttyAPPx isn't opened in userspace (e.g. by a getty) but was at least once (because the bootloader doesn't disable the transmitter). So increase the timeout to 20 ms which should be enough for 9600n8, too. Moreover skip gating the clock if the timeout is elapsed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial/mxs-auart: fix race condition in interrupt handlerUwe Kleine-König2013-09-101-8/+9
| | | | | | | | | | | | | | | | commit d970d7fe65adff5efe75b4a73c4ffc9be57089f7 upstream. The handler needs to ack the pending events before actually handling them. Otherwise a new event might come in after it it considered non-pending or handled and is acked then without being handled. So this event is only noticed when the next interrupt happens. Without this patch an i.MX28 based machine running an rt-patched kernel regularly hangs during boot. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* pch_uart: fix a deadlock when pch_uart as consoleLiang Li2013-07-271-7/+22
| | | | | | | | | | | | | | | | | | | | | | | commit 384e301e3519599b000c1a2ecd938b533fc15d85 upstream. When we use pch_uart as system console like 'console=ttyPCH0,115200', then 'send break' to it. We'll encounter the deadlock on a cpu/core, with interrupts disabled on the core. When we happen to have all irqs affinity to cpu0 then the deadlock on cpu0 actually deadlock whole system. In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags) then call pch_uart_err_ir when break is received. Then the call to dev_err would actually call to pch_console_write then we'll run into another spin_lock(&priv->lock), with interrupts disabled. So in the call sequence lead by pch_uart_interrupt, we should be carefully to call functions that will 'print message to console' only in case the uart port is not being used as serial console. Signed-off-by: Liang Li <liang.li@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Revert "serial: 8250_pci: add support for another kind of NetMos Technology ↵Greg Kroah-Hartman2013-07-271-4/+0
| | | | | | | | | | | | | | | | | PCI 9835 Multi-I/O Controller" commit 828c6a102b1f2b8583fadc0e779c46b31d448f0b upstream. This reverts commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366. As reported by Stefan, this device already works with the parport_serial driver, so the 8250_pci driver should not also try to grab it as well. Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Cc: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* TTY: Fix tty miss restart after we turn off flow-controlWang YanQing2013-05-301-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | commit dab73b4eb9ef924a2b90dab84e539076d82b256f upstream. I meet emacs hang in start if I do the operation below: 1: echo 3 > /proc/sys/vm/drop_caches 2: emacs BigFile 3: Press CTRL-S follow 2 immediately Then emacs hang on, CTRL-Q can't resume, the terminal hang on, you can do nothing with this terminal except close it. The reason is before emacs takeover control the tty, we use CTRL-S to XOFF it. Then when emacs takeover the control, it may don't use the flow-control, so emacs hang. This patch fix it. This patch will fix a kind of strange tty relation hang problem, I believe I meet it with vim in ssh, and also see below bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823 Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: fix up atime/mtime mess, take threeLinus Torvalds2013-05-132-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit b0b885657b6c8ef63a46bc9299b2a7715d19acde upstream. We first tried to avoid updating atime/mtime entirely (commit b0de59b5733d: "TTY: do not update atime/mtime on read/write"), and then limited it to only update it occasionally (commit 37b7f3c76595: "TTY: fix atime/mtime regression"), but it turns out that this was both insufficient and overkill. It was insufficient because we let people attach to the shared ptmx node to see activity without even reading atime/mtime, and it was overkill because the "only once a minute" means that you can't really tell an idle person from an active one with 'w'. So this tries to fix the problem properly. It marks the shared ptmx node as un-notifiable, and it lowers the "only once a minute" to a few seconds instead - still long enough that you can't time individual keystrokes, but short enough that you can tell whether somebody is active or not. Reported-by: Simon Kirby <sim@hostway.ca> Acked-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* TTY: fix atime/mtime regressionJiri Slaby2013-05-131-1/+15
| | | | | | | | | | | | | | | | | | | | commit 37b7f3c76595e23257f61bd80b223de8658617ee upstream. In commit b0de59b5733d ("TTY: do not update atime/mtime on read/write") we removed timestamps from tty inodes to fix a security issue and waited if something breaks. Well, 'w', the utility to find out logged users and their inactivity time broke. It shows that users are inactive since the time they logged in. To revert to the old behaviour while still preventing attackers to guess the password length, we update the timestamps in one-minute intervals by this patch. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: For 3.2, use Greg's backported version] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* TTY: do not update atime/mtime on read/writeJiri Slaby2013-05-131-6/+2
| | | | | | | | | | | | | | | | | | | | | commit b0de59b5733d18b0d1974a060860a8b5c1b36a2e upstream. On http://vladz.devzero.fr/013_ptmx-timing.php, we can see how to find out length of a password using timestamps of /dev/ptmx. It is documented in "Timing Analysis of Keystrokes and Timing Attacks on SSH". To avoid that problem, do not update time when reading from/writing to a TTY. I am afraid of regressions as this is a behavior we have since 0.97 and apps may expect the time to be current, e.g. for monitoring whether there was a change on the TTY. Now, there is no change. So this would better have a lot of testing before it goes upstream. References: CVE-2013-0160 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial_core.c: add put_device() after device_find_child()Federico Vaga2013-05-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5a65dcc04cda41f4122aacc37a5a348454645399 upstream. The serial core uses device_find_child() but does not drop the reference to the retrieved child after using it. This patch add the missing put_device(). What I have done to test this issue. I used a machine with an AMBA PL011 serial driver. I tested the patch on next-20120408 because the last branch [next-20120415] does not boot on this board. For test purpose, I added some pr_info() messages to print the refcount after device_find_child() (lines: 1937,2009), and after put_device() (lines: 1947, 2021). Boot the machine *without* put_device(). Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 87.058575] uart_suspend_port:1937 refcount 4 [ 87.058582] uart_suspend_port:1947 refcount 4 [ 87.098083] uart_resume_port:2009refcount 5 [ 87.098088] uart_resume_port:2021 refcount 5 echo disk > /sys/power/state [ 103.055574] uart_suspend_port:1937 refcount 6 [ 103.055580] uart_suspend_port:1947 refcount 6 [ 103.095322] uart_resume_port:2009 refcount 7 [ 103.095327] uart_resume_port:2021 refcount 7 echo disk > /sys/power/state [ 252.459580] uart_suspend_port:1937 refcount 8 [ 252.459586] uart_suspend_port:1947 refcount 8 [ 252.499611] uart_resume_port:2009 refcount 9 [ 252.499616] uart_resume_port:2021 refcount 9 The refcount continuously increased. Boot the machine *with* this patch. Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 159.333559] uart_suspend_port:1937 refcount 4 [ 159.333566] uart_suspend_port:1947 refcount 3 [ 159.372751] uart_resume_port:2009 refcount 4 [ 159.372755] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 185.713614] uart_suspend_port:1937 refcount 4 [ 185.713621] uart_suspend_port:1947 refcount 3 [ 185.752935] uart_resume_port:2009 refcount 4 [ 185.752940] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 207.458584] uart_suspend_port:1937 refcount 4 [ 207.458591] uart_suspend_port:1947 refcount 3 [ 207.498598] uart_resume_port:2009 refcount 4 [ 207.498605] uart_resume_port:2021 refcount 3 The refcount correctly handled. Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* vt: synchronize_rcu() under spinlock is not nice...Al Viro2013-04-101-2/+4
| | | | | | | | | | | commit e8cd81693bbbb15db57d3c9aa7dd90eda4842874 upstream. vcs_poll_data_free() calls unregister_vt_notifier(), which calls atomic_notifier_chain_unregister(), which calls synchronize_rcu(). Do it *after* we'd dropped ->f_lock. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: atmel_serial_probe(): index of atmel_ports[] fixPawel Wieczorkiewicz2013-04-101-6/+5
| | | | | | | | | | | | commit 503bded92da283b2f31d87e054c4c6d30c3c2340 upstream. Index of atmel_ports[ATMEL_MAX_UART] should be smaller than ATMEL_MAX_UART. Signed-off-by: Pawel Wieczorkiewicz <wpawel@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline optionTkhai Kirill2013-03-271-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cb29529ea0030e60ef1bbbf8399a43d397a51526 ] If a machine has X (X < 4) sunsu ports and cmdline option "console=ttySY" is passed, where X < Y <= 4, than the following panic happens: Unable to handle kernel NULL pointer dereference TPC: <sunsu_console_setup+0x78/0xe0> RPC: <sunsu_console_setup+0x74/0xe0> I7: <register_console+0x378/0x3e0> Call Trace: [0000000000453a38] register_console+0x378/0x3e0 [0000000000576fa0] uart_add_one_port+0x2e0/0x340 [000000000057af40] su_probe+0x160/0x2e0 [00000000005b8a4c] platform_drv_probe+0xc/0x20 [00000000005b6c2c] driver_probe_device+0x12c/0x220 [00000000005b6da8] __driver_attach+0x88/0xa0 [00000000005b4df4] bus_for_each_dev+0x54/0xa0 [00000000005b5a54] bus_add_driver+0x154/0x260 [00000000005b7190] driver_register+0x50/0x180 [00000000006d250c] sunsu_init+0x18c/0x1e0 [00000000006c2668] do_one_initcall+0xe8/0x160 [00000000006c282c] kernel_init_freeable+0x12c/0x1e0 [0000000000603764] kernel_init+0x4/0x100 [0000000000405f64] ret_from_syscall+0x1c/0x2c [0000000000000000] (null) 1)Fix the panic; 2)Increment registered port number every successful probe. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* TTY: do not reset master's packet modeJiri Slaby2013-03-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b81273a132177edd806476b953f6afeb17b786d5 upstream. Now that login from util-linux is forced to drop all references to a TTY which it wants to hangup (to reach reference count 1) we are seeing issues with telnet. When login closes its last reference to the slave PTY, it also resets packet mode on the *master* side. And we have a race here. What telnet does is fork+exec of `login'. Then there are two scenarios: * `login' closes the slave TTY and resets thus master's packet mode, but even now telnet properly sets the mode, or * `telnetd' sets packet mode on the master, `login' closes the slave TTY and resets master's packet mode. The former case is OK. However the latter happens in much more cases, by the order of magnitude to be precise. So when one tries to login to such a messed telnet setup, they see the following: inux login: ogin incorrect Note the missing first letters -- telnet thinks it is still in the packet mode, so when it receives "linux login" from `login', it considers "l" as the type of the packet and strips it. SuS does not mention how the implementation should behave. Both BSDs I checked (Free and Net) do not reset the flag upon the last close. By this I am resurrecting an old bug, see References. We are hitting it regularly now, i.e. with updated util-linux, ergo login. Here, I am changing a behavior introduced back in 2.1 times. It would better have a long time testing before goes upstream. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Bryan Mason <bmason@redhat.com> References: https://lkml.org/lkml/2009/11/11/223 References: https://bugzilla.redhat.com/show_bug.cgi?id=504703 References: https://bugzilla.novell.com/show_bug.cgi?id=797042 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: serial: fix typo "ARCH_S5P6450"Paul Bolle2013-03-201-1/+1
| | | | | | | | | | | | | | | commit 827aa0d36d486f359808c8fb931cf7a71011a09d upstream. This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at commit 2555e663b367b8d555e76023f4de3f6338c28d6c ("ARM: S5P64X0: Add UART serial support for S5P6450") - which added this typo - makes clear this should be CPU_S5P6450. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 ↵Wang YanQing2013-03-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Multi-I/O Controller commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366 upstream. 01:08.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) Subsystem: Device [1000:0012] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at e050 [size=8] Region 1: I/O ports at e040 [size=8] Region 2: I/O ports at e030 [size=8] Region 3: I/O ports at e020 [size=8] Region 4: I/O ports at e010 [size=8] Region 5: I/O ports at e000 [size=16] Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Fix 4 port and add support for 8 port 'Unknown' PCI serial port cardsScott Ashcroft2013-03-201-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d13402a4a944e72612a9ec5c9190e35717c02a9d upstream. I've managed to find an 8 port version of the card 4 port card which was discussed here: http://marc.info/?l=linux-serial&m=120760744205314&w=2 Looking back at that thread there were two issues in the original patch. 1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post. 2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return. This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card. $ lspci -vvv -n -s 00:08.0 00:08.0 0780: 10b5:9050 (rev 01) Subsystem: 10b5:1588 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 17 Region 1: I/O ports at ff00 [size=128] Region 2: I/O ports at fe00 [size=64] Region 3: I/O ports at fd00 [size=8] Capabilities: <access denied> Kernel driver in use: serial $ dmesg | grep 0000:00:08.0: [ 0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780 [ 0.083355] pci 0000:00:08.0: reg 14: [io 0xff00-0xff7f] [ 0.083369] pci 0000:00:08.0: reg 18: [io 0xfe00-0xfe3f] [ 0.083382] pci 0000:00:08.0: reg 1c: [io 0xfd00-0xfd07] [ 0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot [ 1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A [ 1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A [ 1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A [ 1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A [ 1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A [ 1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A [ 1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A [ 1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty/serial: Add support for Altera serial portLey Foon Tan2013-03-202-0/+27
| | | | | | | | | | | commit e06c93cacb82dd147266fd1bdb2d0a0bd45ff2c1 upstream. Add support for Altera 8250/16550 compatible serial port. Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust filenames, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: Correct tty buffer flush.Ilya Zykov2013-03-201-4/+7
| | | | | | | | | | | | | | commit 64325a3be08d364a62ee8f84b2cf86934bc2544a upstream. The root of problem is carelessly zeroing pointer(in function __tty_buffer_flush()), when another thread can use it. It can be cause of "NULL pointer dereference". Main idea of the patch, this is never free last (struct tty_buffer) in the active buffer. Only flush the data for ldisc(buf->head->read = buf->head->commit). At that moment driver can collect(write) data in buffer without conflict. It is repeat behavior of flush_to_ldisc(), only without feeding data to ldisc. Signed-off-by: Ilya Zykov <ilya@ilyx.ru> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* 8250: use correct value for PORT_BRCM_TRUMANAGEBen Hutchings2013-03-061-2/+2
| | | | | | | | | | | | | | | | | | When backporting commit ebebd49a8eab ('8250/16?50: Add support for Broadcom TruManage redirected serial port') I took the next available port type number for PORT_BRCM_TRUMANAGE (22). However, the 8250 port type numbers are exposed to userland through the TIOC{G,S}SERIAL ioctls and so must remain stable. Redefine PORT_BRCM_TRUMANAGE as 25, matching mainline as of commit 85f024401bf807. This leaves port types 22-24 within the valid range for 8250 but not implemented there. Change serial8250_verify_port() to specifically reject these and change serial8250_type() to return "unknown" for them (though I'm not sure why it would ever see them). Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* fb: Yet another band-aid for fixing lockdep messTakashi Iwai2013-03-061-15/+28
| | | | | | | | | | | | | | | | | | commit e93a9a868792ad71cdd09d75e5a02d8067473c4e upstream. I've still got lockdep warnings even after Alan's patch, and it seems that yet more band aids are required to paper over similar paths for unbind_con_driver() and unregister_con_driver(). After this hack, lockdep warnings are finally gone. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Jiri Kosina <jkosina@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* fb: rework locking to fix lock ordering on takeoverAlan Cox2013-03-061-23/+70
| | | | | | | | | | | | | | | | | | | | | | | commit 50e244cc793d511b86adea24972f3a7264cae114 upstream. Adjust the console layer to allow a take over call where the caller already holds the locks. Make the fb layer lock in order. This is partly a band aid, the fb layer is terminally confused about the locking rules it uses for its notifiers it seems. [akpm@linux-foundation.org: remove stray non-ascii char, tidy comment] [akpm@linux-foundation.org: export do_take_over_console()] [airlied: cleanup another non-ascii char] Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jiri Kosina <jkosina@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* vgacon/vt: clear buffer attributes when we load a 512 character font (v2)Dave Airlie2013-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | commit 2a2483072393b27f4336ab068a1f48ca19ff1c1e upstream. When we switch from 256->512 byte font rendering mode, it means the current contents of the screen is being reinterpreted. The bit that holds the high bit of the 9-bit font, may have been previously set, and thus the new font misrenders. The problem case we see is grub2 writes spaces with the bit set, so it ends up with data like 0x820, which gets reinterpreted into 0x120 char which the font translates into G with a circumflex. This flashes up on screen at boot and is quite ugly. A current side effect of this patch though is that any rendering on the screen changes color to a slightly darker color, but at least the screen no longer corrupts. v2: as suggested by hpa, always clear the attribute space, whether we are are going to or from 512 chars. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: set_termios/set_termiox should not return -EINTROleg Nesterov2013-03-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 183d95cdd834381c594d3aa801c1f9f9c0c54fa9 upstream. See https://bugzilla.redhat.com/show_bug.cgi?id=904907 read command causes bash to abort with double free or corruption (out). A simple test-case from Roman: // Compile the reproducer and send sigchld ti that process. // EINTR occurs even if SA_RESTART flag is set. void handler(int sig) { } main() { struct sigaction act; act.sa_handler = handler; act.sa_flags = SA_RESTART; sigaction (SIGCHLD, &act, 0); struct termio ttp; ioctl(0, TCGETA, &ttp); while(1) { if (ioctl(0, TCSETAW, ttp) < 0) { if (errno == EINTR) { fprintf(stderr, "BUG!"); return(1); } } } } Change set_termios/set_termiox to return -ERESTARTSYS to fix this particular problem. I didn't dare to change other EINTR's in drivers/tty/, but they look equally wrong. Reported-by: Roman Rakus <rrakus@redhat.com> Reported-by: Lingzhu Xiang <lxiang@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* 8250/16?50: Add support for Broadcom TruManage redirected serial portStephen Hurd2013-02-063-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream. Add support for the UART device present in Broadcom TruManage capable NetXtreme chips (ie: 5761m 5762, and 5725). This implementation has a hidden transmit FIFO, so running in single-byte interrupt mode results in too many interrupts. The UART_CAP_HFIFO capability was added to track this. It continues to reload the THR as long as the THRE and TSRE bits are set in the LSR up to a specified limit (1024 is used here). Signed-off-by: Stephen Hurd <shurd@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: - Adjust filenames - Adjust context - First available port type number is 22 not 24 - s/uart_8250_port/uart_port/ - Use serial_in() not serial_port_in()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-14 15:59:28 +0000