summaryrefslogtreecommitdiffstats
path: root/drivers/usb/core
Commit message (Collapse)AuthorAgeFilesLines
* usbcore: set lpm_capable field for LPM capable root hubsXenia Ragiadakou2013-11-203-1/+8
| | | | | | | | | | | | commit 9df89d85b407690afa46ddfbccc80bec6869971d upstream. This patch sets the lpm_capable field for root hubs with LPM capabilities. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: quirks: add touchscreen that is dazzeled by remote wakeupOliver Neukum2013-10-161-0/+3
| | | | | | | | The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: quirks.c: add one device that cannot deal with suspensionOliver Neukum2013-10-141-0/+3
| | | | | | | | The device is not responsive when resumed, unless it is reset. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb/core/devio.c: Don't reject control message to endpoint with wrong ↵Kurt Garloff2013-09-251-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | direction bit Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101) [1] with the Windows App (EasyNote) works natively but fails when Windows is running under KVM (and the USB device handed to KVM). The reason is a USB control message usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008 This goes to endpoint address 0x01 (wIndex); however, endpoint address 0x01 does not exist. There is an endpoint 0x81 though (same number, but other direction); the app may have meant that endpoint instead. The kernel thus rejects the IO and thus we see the failure. Apparently, Linux is more strict here than Windows ... we can't change the Win app easily, so that's a problem. It seems that the Win app/driver is buggy here and the driver does not behave fully according to the USB HID class spec that it claims to belong to. The device seems to happily deal with that though (and seems to not really care about this value much). So the question is whether the Linux kernel should filter here. Rejecting has the risk that somewhat non-compliant userspace apps/ drivers (most likely in a virtual machine) are prevented from working. Not rejecting has the risk of confusing an overly sensitive device with such a transfer. Given the fact that Windows does not filter it makes this risk rather small though. The patch makes the kernel more tolerant: If the endpoint address in wIndex does not exist, but an endpoint with toggled direction bit does, it will let the transfer through. (It does NOT change the message.) With attached patch, the app in Windows in KVM works. usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81 I suspect this will mostly affect apps in virtual environments; as on Linux the apps would have been adapted to the stricter handling of the kernel. I have done that for mine[2]. [1] http://www.pegatech.com/ [2] https://sourceforge.net/projects/notetakerpen/ Signed-off-by: Kurt Garloff <kurt@garloff.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbcore: check usb device's state before sending a Set SEL control transferXenia Ragiadakou2013-09-231-0/+3
| | | | | | | | | | | Set SEL control urbs cannot be sent to a device in unconfigured state. This patch adds a check in usb_req_set_sel() to ensure the usb device's state is USB_STATE_CONFIGURED. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* usbcore: fix incorrect type in assignment in descriptors_changed()Xenia Ragiadakou2013-08-301-3/+3
| | | | | | | | | This patch fixes the incorrect assignment of a variable with type 'le16' to a variable with type 'unsigned int'. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbcore: compare and release one bos descriptor in usb_reset_and_verify_device()Xenia Ragiadakou2013-08-301-2/+21
| | | | | | | | | | | | | | | | | | | In usb_reset_and_verify_device(), hub_port_init() allocates a new bos descriptor to hold the value read by the device. The new bos descriptor has to be compared with the old one in order to figure out if device 's firmware has changed in which case the device has to be reenumerated. In the original code, none of the two descriptors was deallocated leading to memory leaks. This patch compares the old bos descriptor with the new one to detect change in firmware and releases the newly allocated bos descriptor to prevent memory leak. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Tested-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: core: be specific about attribute permissionsGreg Kroah-Hartman2013-08-254-197/+166
| | | | | | | | | Instead of having to audit all sysfs attributes, to ensure we get them right, use the default macros the driver core provides us (read-only, read-write) to make the code simpler, and to prevent any mistakes from ever happening. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: core: use DRIVER_ATTR_RW()Greg Kroah-Hartman2013-08-231-15/+13
| | | | | | Use DRIVER_ATTR_RW() to make it easier to audit sysfs file permissions. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: don't use bNbrPorts after initializationKrzysztof Mazur2013-08-231-7/+5
| | | | | | | | | | | After successful initialization hub->descriptor->bNbrPorts and hub->hdev->maxchild are equal, but using hub->hdev->maxchild is preferred because that value is explicitly used for initialization of hub->ports[]. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: fail on usb_hub_create_port_device() errorsKrzysztof Mazur2013-08-231-2/+8
| | | | | | | | | | Ignoring usb_hub_create_port_device() errors cause later NULL pointer deference when uninitialized hub->ports[i] entries are dereferenced after port memory allocation error. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: fix cleanup after failure in hub_configure()Krzysztof Mazur2013-08-231-0/+1
| | | | | | | | | | | | | If the hub_configure() fails after setting the hdev->maxchild the hub->ports might be NULL or point to uninitialized kzallocated memory causing NULL pointer dereference in hub_quiesce() during cleanup. Now after such error the hdev->maxchild is set to 0 to avoid cleanup of uninitialized ports. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-usb-2013-08-15-step-1' into for-usb-nextSarah Sharp2013-08-153-20/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xhci: Step 1 to fix usb-linus and usb-next. Hi Greg, This is the first of three steps to fix your usb-linus and usb-next trees. As I mentioned, commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66 "USB: handle LPM errors during device suspend correctly" was incorrectly added to usb-next when it should have been added to usb-linus and marked for stable. Two port power off bug fixes touch the same code that patch touches, but it's not easy to simply move commit 4fae6f0f patch to usb-linus because commit 28e861658e23ca94692f98e245d254c75c8088a7 "USB: refactor code for enabling/disabling remote wakeup" also touched those code sections. I propose a two step process to fix this: 1. Pull these four patches into usb-linus. 2. Revert commit 28e861658e23ca94692f98e245d254c75c8088a7 from usb-next. Merge usb-linus into usb-next, and resolve the conflicts. I will be sending pull requests for these steps. This pull request is step one, and contains the backported version of commit 4fae6f0fa86f92e6bc7429371b1e177ad0aaac66, the two port power off fixes, and an unrelated xhci-plat bug fix. Sarah Sharp Resolved conflicts: drivers/usb/core/hub.c
| * usb: Don't fail port power resume on device disconnect.Sarah Sharp2013-08-151-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Userspace can tell the kernel to power off any USB port, including ones that are visible and connectible to users. When an attached USB device goes into suspend, the port will be powered off if the pm_qos_no_port_poweroff file for its port is set to 0, the device does not have remote wakeup enabled, and the device is marked as persistent. If the user disconnects the USB device while the port is powered off, the current code does not handle that properly. If you disconnect a device, and then run `lsusb -v -s` for the device, the device disconnect does not get handled by the USB core. The runtime resume of the port fails, because hub_port_debounce_be_connected() returns -ETIMEDOUT. This means the port resume fails and khubd doesn't handle the USB device disconnect. This leaves the device listed in lsusb, and the port's runtime_status will be permanently marked as "error". Fix this by ignoring the return value of hub_port_debounce_be_connected. Users can disconnect USB devices while the ports are powered off, and we must be able to handle that. This patch should be backported to kernels as old as 3.9, that contain the commit ad493e5e580546e6c3024b76a41535476da1546a "usb: add usb port auto power off mechanism" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Lan Tianyu <tianyu.lan@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * usb: don't check pm qos NO_POWER_OFF flag in usb_port_suspend()Lan Tianyu2013-08-151-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pm qos NO_POWER_OFF flag is checked twice during usb device suspend to see if the usb port power off condition is met. This is redundant and also will prevent the port from being powered off if the NO_POWER_OFF flag is changed to 1 from 0 after the device was already suspended. More detail in the following link. http://marc.info/?l=linux-usb&m=136543949130865&w=2 This patch should be backported to kernels as old as 3.7, that contain the commit f7ac7787ad361e31a7972e2854ed8dc2eedfac3b "usb/acpi: Use ACPI methods to power off ports." Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
| * USB: handle LPM errors during device suspend correctlyAlan Stern2013-08-151-33/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hub driver's usb_port_suspend() routine doesn't handle errors related to Link Power Management properly. It always returns failure, it doesn't try to clean up the wakeup setting, (in the case of system sleep) it doesn't try to go ahead with the port suspend regardless, and it doesn't try to apply the new power-off mechanism. This patch fixes these problems. Note: Sarah fixed this patch to apply against 3.11, since the original commit (4fae6f0fa86f92e6bc7429371b1e177ad0aaac66 "USB: handle LPM errors during device suspend correctly") called usb_disable_remote_wakeup, which won't be added until 3.12. This patch should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections.". There will be merge conflicts, since LTM wasn't added until 3.6. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
| * usb: add two quirky touchscreenOliver Neukum2013-08-141-0/+6
| | | | | | | | | | | | | | | | These devices tend to become unresponsive after S3 Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: core: don't try to reset_device() a port that got just disconnectedJulius Werner2013-07-311-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | usb: rh_call_control tbuf overflow fixSean O. Stalley2013-08-141-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rh_call_control() contains a buffer, tbuf, which it uses to hold USB descriptors. These discriptors are eventually copied into the transfer_buffer in the URB. The buffer in the URB is dynamically defined and is always large enough to hold the amount of data it requests. tbuf is currently statically allocated on the stack with a size of 15 bytes, regardless of the size specified in the URB. This patch dynamically allocates tbuf, and ensures that tbuf is at least as big as the buffer in the URB. If an hcd attempts to write a descriptor containing more than 15 bytes ( such as the Standard BOS Descriptor for hubs, defined in the USB3.0 Spec, section 10.13.1 ) the write would overflow the buffer and corrupt the stack. This patch addresses this behavior. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb/hcd: Log error code if reset() failsMark Brown2013-08-121-1/+1
| | | | | | | | | | | | | | | | If someone provided meaningful error codes from reset() we should tell the user what they were. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: config->desc.bLength may not exceed amount of data returned by the deviceHans de Goede2013-08-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | While reading the config parsing code I noticed this check is missing, without this check config->desc.wTotalLength can end up with a value larger then the dev->rawdescriptors length for the config, and when userspace then tries to get the rawdescriptors bad things may happen. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: introduce usb_device_no_sg_constraint() helperMing Lei2013-08-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Some host controllers(such as xHCI) can support building packet from discontinuous buffers, so introduce one flag and helper for this kind of host controllers, then the feature can help some applications(such as usbnet) by supporting arbitrary length of sg buffers. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: HCD: support giveback of URB in tasklet contextMing Lei2013-08-121-30/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: fix some scripts/kernel-doc warningsYacine Belkadi2013-08-039-83/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: handle LPM errors during device suspend correctlyAlan Stern2013-07-311-22/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The hub driver's usb_port_suspend() routine doesn't handle errors related to Link Power Management properly. It always returns failure, it doesn't try to clean up the wakeup setting, (in the case of system sleep) it doesn't try to go ahead with the port suspend regardless, and it doesn't try to apply the new power-off mechanism. This patch fixes these problems. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: refactor code for enabling/disabling remote wakeupAlan Stern2013-07-311-52/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hub driver is inconsistent in its organization of code for enabling and disabling remote wakeup. There is a special routine to disable wakeup for SuperSpeed devices but not for slower devices, and there is no special routine to enable wakeup. This patch refactors the code. It renames and changes the existing function to make it handle both SuperSpeed and non-SuperSpeed devices, and it adds a corresponding routine to enable remote wakeup. It also changes the speed determination to look at the device's speed rather than the speed of the parent hub -- this shouldn't make any difference because a SuperSpeed device always has to be attached to a SuperSpeed hub and conversely. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: simplify the interface of usb_get_status()Alan Stern2013-07-312-12/+11
| | | | | | | | | | | | | | | | | | | | This patch simplifies the interface presented by usb_get_status(). Instead of forcing callers to check for the proper data length and convert the status value to host byte order, the function will now do these things itself. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: core: don't try to reset_device() a port that got just disconnectedJulius Werner2013-07-311-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB hub driver's event handler contains a check to catch SuperSpeed devices that transitioned into the SS.Inactive state and tries to fix them with a reset. It decides whether to do a plain hub port reset or call the usb_reset_device() function based on whether there was a device attached to the port. However, there are device/hub combinations (found with a JetFlash Transcend mass storage stick (8564:1000) on the root hub of an Intel LynxPoint PCH) which can transition to the SS.Inactive state on disconnect (and stay there long enough for the host to notice). In this case, above-mentioned reset check will call usb_reset_device() on the stale device data structure. The kernel will send pointless LPM control messages to the no longer connected device address and can even cause several 5 second khubd stalls on some (buggy?) host controllers, before finally accepting the device's fate amongst a flurry of error messages. This patch makes the choice of reset dependent on the port status that has just been read from the hub in addition to the existence of an in-kernel data structure for the device, and only proceeds with the more extensive reset if both are valid. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 3.11-rc3 into usb-nextGreg Kroah-Hartman2013-07-292-8/+43
|\|
| * usb: Clear both buffers when clearing a control transfer TT buffer.William Gulland2013-07-251-0/+9
| | | | | | | | | | | | | | | | | | | | | | Control transfers have both IN and OUT (or SETUP) packets, so when clearing TT buffers for a control transfer it's necessary to send two HUB_CLEAR_TT_BUFFER requests to the hub. Signed-off-by: William Gulland <wgulland@google.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: global suspend and remote wakeup don't mixAlan Stern2013-07-162-8/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hub driver was recently changed to use "global" suspend for system suspend transitions on non-SuperSpeed buses. This means that we don't suspend devices individually by setting the suspend feature on the upstream hub port; instead devices all go into suspend automatically when the root hub stops transmitting packets. The idea was to save time and to avoid certain kinds of wakeup races. Now it turns out that many hubs are buggy; they don't relay wakeup requests from a downstream port to their upstream port if the downstream port's suspend feature is not set (depending on the speed of the downstream port, whether or not the hub is enabled for remote wakeup, and possibly other factors). We can't have hubs dropping wakeup requests. Therefore this patch goes partway back to the old policy: It sets the suspend feature for a port if the device attached to that port or any of its descendants is enabled for wakeup. People will still be able to benefit from the time savings if they don't care about wakeup and leave it disabled on all their devices. In order to accomplish this, the patch adds a new field to the usb_hub structure: wakeup_enabled_descendants is a count of how many devices below a suspended hub are enabled for remote wakeup. A corresponding new subroutine determines the number of wakeup-enabled devices at or below an arbitrary suspended USB device. This should be applied to the 3.10 stable kernel. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usbfs: Allow printer class 'get_device_id' without needing to claim the intfHans de Goede2013-07-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For certain (HP) printers the printer device_id does not only contain a static part identifying the printer, but it also contains a dynamic part giving printer status, ink level, etc. To get to this info various userspace utilities need to be able to make a printer class 'get_device_id' request without first claiming the interface (as that is in use for the actual printer driver). Since the printer class 'get_device_id' request does not change interface settings in anyway, allowing this without claiming the interface should not cause any issues. CC: Sanjay Kumar <sanjay.kumar14@hp.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: remove redundant "#if"Alan Stern2013-07-251-4/+2
| | | | | | | | | | | | | | | | | | This patch removes a redundant nested "#ifdef CONFIG_PM" from the hub driver. It also adds a label to the "#endif" line corresponding to the outer "#ifdef CONFIG_PM". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: check sg buffer size in usb_submit_urbMing Lei2013-07-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB spec stats that short packet can only appear at the end of transfer. Because lost of HC(EHCI/UHCI/OHCI/...) can't build a full packet from discontinuous buffers, we introduce the limit in usb_submit_urb() to avoid such kind of bad sg buffers coming from driver. The limit might be a bit strict: - platform has iommu to do sg list mapping - some host controllers may support to build full packet from discontinuous buffers. But considered that most of HCs don't support that, and driver need work well or keep consistent on different HCs and ARCHs, we have to introduce the limit. Currently, only usbtest is reported to pass such sg buffers to HC, and other users(mass storage, usbfs) don't have the problem. We don't check it on USB wireless device, because: - wireless devices can't be attached to common USB bus(EHCI/UHCI/OHCI/...) - the max packet size of endpoint may be odd, and often can't devide 4KB which is a typical usage in usb mass storage application Reported-by: Konstantin Filatov <kfilatov@parallels.com> Reported-by: Denis V. Lunev <den@openvz.org> Cc: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: remove unneeded idr.h includeGreg Kroah-Hartman2013-07-241-1/+0
|/ | | | | | | | None of these USB files need idr.h, so don't include it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds2013-07-032-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
| * Merge branch 'pm-assorted'Rafael J. Wysocki2013-06-282-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-assorted: PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt PM / QoS: Add dev_pm_qos_request tracepoints PM / QoS: Add pm_qos_request tracepoints PM / QoS: Add pm_qos_update_target/flags tracepoints PM / QoS: Update Documentation/power/pm_qos_interface.txt PM / Sleep: Print last wakeup source on failed wakeup_count write PM / QoS: correct the valid range of pm_qos_class PM / wakeup: Adjust messaging for wake events during suspend PM / Runtime: Update .runtime_idle() callback documentation PM / Runtime: Rework the "runtime idle" helper routine PM / Hibernate: print physical addresses consistently with other parts of kernel
| | * PM / Runtime: Rework the "runtime idle" helper routineRafael J. Wysocki2013-06-032-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "runtime idle" helper routine, rpm_idle(), currently ignores return values from .runtime_idle() callbacks executed by it. However, it turns out that many subsystems use pm_generic_runtime_idle() which checks the return value of the driver's callback and executes pm_runtime_suspend() for the device unless that value is not 0. If that logic is moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped and its users will not need any .runtime_idle() callbacks any more. Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and ata_port_runtime_idle(), respectively, as well as a few drivers' ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has been returned by the .runtime_idle() callback executed by it. To reduce overall code bloat, make the changes described above. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
* | | usb: check usb_hub_to_struct_hub() return valueMathias Nyman2013-06-183-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_hub_to_struct_hub() can return NULL in some unlikely cases. Add checks where appropriate, or pass the hub pointer as an additional argument if it's known to be valid. The places it makes sense to check usb_hub_to_struct_hub() are picked based on feedback from Alan Stern. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge 3.10-rc5 into usb-nextGreg Kroah-Hartman2013-06-081-3/+7
|\| | | | | | | | | | | | | | | | | We need the changes in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usbfs: Increase arbitrary limit for USB 3 isopkt lengthFederico Manzan2013-05-291-3/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Increase the current arbitrary limit for isocronous packet size to a value large enough to account for USB 3.0 super bandwidth streams, bMaxBurst (0~15 allowed, 1~16 packets) bmAttributes (bit 1:0, mult 0~2, 1~3 packets) so the size max for one USB 3 isocronous transfer is 1024 byte * 16 * 3 = 49152 byte Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Federico Manzan <f.manzan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'for-usb-next-2013-06-06' of ↵Greg Kroah-Hartman2013-06-061-0/+54
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xHCI: USB 2.0 Link PM and misc cleanup patches Hi Greg, Here's six patches to be queued for 3.11. The first four add support for a new type of host hardware-managed USB 2.0 Link Power Management. Hosts with BESL support, including Intel Haswell ULT systems, will now be able to have USB 2.0 devices go into the lower power link state (L1) in between packets. These patches have been tested on Haswell ULT platforms with USB 2.0 webcams that support Link PM. The other two patches are clean up. One from Julius clarifies the xHCI endpoint context debugging to make it consistent with standard endpoint addresses, instead of xHCI endpoint context indexes. The one from Alex changes the xHCI driver to be consistent about passing a void pointer to the xHCI IRQ handler. Sarah Sharp
| * | usb: add usb2 Link PM variables to sysfs and usb_deviceMathias Nyman2013-06-051-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds abitilty to tune L1 timeout (inactivity timer for usb2 link sleep) and BESL (best effort service latency)via sysfs. This also adds a new usb2_lpm_parameters structure with those variables to struct usb_device. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | | USB: fix PTR_ERR translation in init_usb_class()Alexey Khoroshilov2013-06-061-1/+1
|/ / | | | | | | | | | | | | | | | | | | There is a misprint in init_usb_class(): IS_ERR is used to get error code instead of PTR_ERR. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Allow the USB HCD to create Wireless USB root hubsThomas Pugliese2013-06-031-0/+28
| | | | | | | | | | | | | | | | | | | | | | This patch adds Wireless USB root hub support to the USB HCD. It allows the HWA to create its root hub which previously failed because the HCD treated wireless root hubs the same as USB2 high speed hubs. The creation of the root hub would fail in that case due to lack of TTs which wireless root hubs do not support. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 3.10-rc3 into usb-nextGreg Kroah-Hartman2013-05-272-1/+4
|\| | | | | | | | | | | We want these fixes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: reset resume quirk needed by a hubOliver Neukum2013-05-161-0/+3
| | | | | | | | | | | | | | | | Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: remove remaining instances of USB_SUSPENDAlan Stern2013-05-151-1/+1
| | | | | | | | | | | | | | | | | | | | Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: ehci: Only sleep for post-resume handover if devices use persistJulius Werner2013-05-201-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current EHCI code sleeps a flat 110ms in the resume path if there was a USB 1.1 device connected to its companion controller during suspend, waiting for the device to reappear and reset so that it can be handed back to the companion. This is necessary if the device uses persist, so that the companion controller can actually see it during its own resume path. However, if the device doesn't use persist, this is entirely unnecessary. We might just as well ignore it and have the normal device detection/reset/handoff code handle it asynchronously when it eventually shows up. As USB 1.1 devices are almost exclusively HIDs these days (for which persist has no value), this can allow distros to shave another tenth of a second off their resume time. In order to enable this optimization, the patch also adds a new usb_for_each_dev() iterator that is exported by the USB core and wraps bus_for_each_dev() with the logic to differentiate between struct usb_device and struct usb_interface on the usb_bus_type bus. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: message: Fixed parenthesis error in sizeof function.Tülin İzer2013-05-171-1/+1
| | | | | | | | | | | | | | This patch fixes parenthesis error in sizeof function in Usb/message.c Signed-off-by: Tülin İzer <tulinizer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 20:30:18 +0000