summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ehci-hub.c
Commit message (Collapse)AuthorAgeFilesLines
* drivers: usb: fsl: Workaround for USB erratum-A005275Nikhil Badola2015-10-281-0/+7
| | | | | | | | | | | | | | | | | | | | commit f8786a91548df6930643a052e40e5c0b7a8403a5 upstream. Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
* usb: host: ehci: use new USB_RESUME_TIMEOUTFelipe Balbi2015-05-051-3/+6
| | | | | | | | | | | | commit ea16328f80ca8d74434352157f37ef60e2f55ce2 upstream. Make sure we're using the new macro, so our resume signaling will always pass certification. Signed-off-by: Felipe Balbi <balbi@ti.com> [ luis: backported to 3.16: - replaced 'hub_wq' by 'khubd' in comment ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
* usb: ehci: using wIndex + 1 for hub portPeter Chen2014-09-051-1/+1
| | | | | | | | | | | | | | | commit 5cbcc35e5bf0eae3c7494ce3efefffc9977827ae upstream. The roothub's index per controller is from 0, but the hub port index per hub is from 1, this patch fixes "can't find device at roohub" problem for connecting test fixture at roohub when do USB-IF Embedded Host High-Speed Electrical Test. This patch is for v3.12+. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: Export the ehci_hub_control functionLaurent Pinchart2014-04-241-10/+2
| | | | | | | | | | | | Platform drivers sometimes need to perform specific handling of hub control requests. Make this possible by exporting the ehci_hub_control() function which can then be called from a custom hub control handler in the default case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: add delay during suspend to prevent erroneous wakeupsAlan Stern2014-02-181-4/+22
| | | | | | | | | | | | | | | | | | | | | | High-speed USB connections revert back to full-speed signalling when the device goes into suspend. This takes several milliseconds, and during that time it's not possible to tell reliably whether the device has been disconnected. On some platforms, the Wake-On-Disconnect circuitry gets confused during this intermediate state. It generates a false wakeup signal, which can prevent the controller from going to sleep. To avoid this problem, this patch adds a 5-ms delay to the ehci_bus_suspend() routine if any ports have to switch over to full-speed signalling. (Actually, the delay was already present for devices using a particular kind of PHY power management; the patch merely causes the delay to be used more widely.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Peter Chen <Peter.Chen@freescale.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ehci: no conditional compilation for interestingnessOliver Neukum2013-12-031-4/+2
| | | | | | | Simple elemination of the conditional compilation Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ehci: remove ehci_vdbg() verbose debugging statementsXenia Ragiadakou2013-08-301-6/+0
| | | | | | | | | | This patch removes ehci_vdbg debugging statements from EHCI host controller driver because they produce too much information, lowering the signal to noise ratio when debugging, and because they are not used anymore. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: add Kconfig option for EHSETJack Pham2013-08-141-1/+7
| | | | | | | | | | | | | | commit 9841f37a1c ("usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSET") added additional code to the EHCI hub driver but it is anticipated to only have a limited audience (e.g. embedded silicon vendors and integrators). Avoid subjecting all EHCI (and in the future maybe xHCI/OHCI, etc.) HCD users to code bloat by conditionally compiling the EHSET-specific additions with a new Kconfig option, CONFIG_USB_HCD_TEST_MODE. Signed-off-by: Jack Pham <jackp@codeaurora.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-for-v3.12' of ↵Greg Kroah-Hartman2013-08-131-7/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.12 merge window All patches here have been pending on linux-usb and sitting in linux-next for a while now. The biggest things in this tag are: DWC3 learned proper usage of threaded IRQ handlers and now we spend very little time in hardirq context. MUSB now has proper support for BeagleBone and Beaglebone Black. Tegra's USB support also got quite a bit of love and is learning to use PHY layer and generic DT attributes. Other than that, the usual pack of cleanups and non-critical fixes follow. Signed-of-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/gadget/udc-core.c drivers/usb/host/ehci-tegra.c drivers/usb/musb/omap2430.c drivers/usb/musb/tusb6010.c
| * usb: host: add has_tdi_phy_lpm capability bitTuomas Tynkkynen2013-08-121-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The has_hostpc capability bit indicates that the host controller has the HOSTPC register extensions, but at the same time enables clock disabling power saving features with the PHY Low Power Clock Disable (PHCD) bit. However, some host controllers have the HOSTPC extensions but don't support the low-power feature, so the PHCD bit must not be set on those controllers. Add a separate capability bit for the low-power feature instead, and change all existing users of has_hostpc to use this new capability bit. The idea for this commit is taken from an old 2012 commit that never got merged ("disociate chipidea PHY low power suspend control from hostpc") Inspired-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: ehci: Add support for SINGLE_STEP_SET_FEATURE test of EHSETManu Gautam2013-08-121-1/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB Embedded High-speed Host Electrical Test (EHSET) defines the SINGLE_STEP_SET_FEATURE test as follows: 1) The host enumerates the test device with VID:0x1A0A, PID:0x0108 2) The host sends the SETUP stage of a GetDescriptor(Device) 3) The device ACKs the request 4) The host issues SOFs for 15 seconds allowing the test operator to raise the scope trigger just above the SOF voltage level 5) The host sends the IN packet 6) The device sends data in response, triggering the scope 7) The host sends an ACK in response to the data This patch adds additional handling to the EHCI hub driver and allows the EHSET driver to initiate this test mode by issuing a a SetFeature request to the root hub with a Test Selector value of 0x06. From there it mimics ehci_urb_enqueue() but separately submits QTDs for the SETUP and DATA/STATUS stages in order to insert a delay in between. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> [jackp@codeaurora.org: imported from commit c2084930 on codeaurora.org; minor cleanup and updated author email] Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: improve interrupt qh unlinkMing Lei2013-08-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ehci-hcd currently unlinks an interrupt QH when it becomes empty, that is, after its last URB completes. This works well because in almost all cases, the completion handler for an interrupt URB resubmits the URB; therefore the QH doesn't become empty and doesn't get unlinked. When we start using tasklets for URB completion, this scheme won't work as well. The resubmission won't occur until the tasklet runs, which will be some time after the completion is queued with the tasklet. During that delay, the QH will be empty and so will be unlinked unnecessarily. To prevent this problem, this patch adds a 5-ms time delay before empty interrupt QHs are unlinked. Most often, during that time the interrupt URB will be resubmitted and thus we can avoid unlinking the QH. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: don't depend on hardware for tracking port resets and resumesAlan Stern2013-08-021-34/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In theory, an EHCI controller can turn off the PORT_RESUME or PORT_RESET bits in a port status register all by itself (and some controllers actually do this). We shouldn't depend on these bits being set correctly. This patch rearranges the code in ehci-hcd that handles completion of port resets and resumes. We guarantee that ehci->reset_done[portnum] is nonzero if a reset or resume is in progress, and that the portnum bit is set in ehci->resuming_ports if the operation is a resume. (To help enforce this guarantee, the patch prevents suspended ports from being reset.) Therefore it's not necessary to look at the port status bits to learn what's going on. The patch looks bigger than it really is, because it changes the indentation level of a sizeable region of code. Most of what it actually does is interchange some tests. The only functional changes are testing reset_done and resuming_ports rather than PORT_RESUME and PORT_RESET, removing a now-unnecessary check for spontaneous resets of the PORT_RESUME and PORT_RESET bits, and preventing a suspended or resuming port from being reset. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: keep better track of resuming portsAlan Stern2013-08-021-1/+2
|/ | | | | | | | | | | | | | | | | The ehci-hcd driver isn't as careful as it should be about the way it uses ehci->resuming_ports. One of the omissions was fixed recently by commit 47a64a13d54 (USB: EHCI: Fix resume signalling on remote wakeup), but there are other places that need attention: When a port's suspend feature is explicitly cleared, the corresponding bit in resuming_ports should be set and the core should be notified about the port resume. We don't need to clear a resuming_ports bit when a reset completes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: Fix resume signalling on remote wakeupRoger Quadros2013-07-221-0/+1
| | | | | | | | | | | | | | | | | Set the ehci->resuming flag for the port we receive a remote wakeup on so that resume signalling can be completed. Without this, the root hub timer will not fire again to check if the resume was completed and there will be a never-ending wait on on the port. This effect is only observed if the HUB IRQ IN does not come after we have initiated the port resume. Signed-off-by: Roger Quadros <rogerq@ti.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: export ehci_handshake for ehci-hcd sub-driversManjunath Goudar2013-06-171-2/+2
| | | | | | | | | | | | | | | In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ehci: Only sleep for post-resume handover if devices use persistJulius Werner2013-05-201-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | The current EHCI code sleeps a flat 110ms in the resume path if there was a USB 1.1 device connected to its companion controller during suspend, waiting for the device to reappear and reset so that it can be handed back to the companion. This is necessary if the device uses persist, so that the companion controller can actually see it during its own resume path. However, if the device doesn't use persist, this is entirely unnecessary. We might just as well ignore it and have the normal device detection/reset/handoff code handle it asynchronously when it eventually shows up. As USB 1.1 devices are almost exclusively HIDs these days (for which persist has no value), this can allow distros to shave another tenth of a second off their resume time. In order to enable this optimization, the patch also adds a new usb_for_each_dev() iterator that is exported by the USB core and wraps bus_for_each_dev() with the logic to differentiate between struct usb_device and struct usb_interface on the usb_bus_type bus. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EHCI: Quirk flag for port power handling on overcurrent.Christian Engelmayer2013-04-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | Commit 756aa6b3d536afe85e151138cb03a293998887b3 (ehci-hub: improved over-current recovery) added port power cycling on overcurrent indications as needed by the MPC8349 USB controller after resolving of the overcurrent situation in order to have the host state machine assert the correct port status again. Commit 81463c1d707186adbbe534016cd1249edeab0dac (EHCI: only power off port if over-current is active) solved a thus resulting issue of endless overcurrent changes in combination with the MAX4967 USB power supply chip that signals overcurrent when power is not enabled by only powering off a port if the overcurrent is currently active. Added quirks flag need_oc_pp_cycle in order to specify the needed behaviour as there is no common behaviour that can comply with both requirements. Activated the quirks handling for Freescale 83xx based boards. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'usb-linus' into usb-nextGreg Kroah-Hartman2013-03-201-1/+1
|\ | | | | | | | | | | | | | | This is to pick up the fixes in that branch, and let Alan fix the merge error in drivers/usb/host/ehci-timer.c better than I just did (as I know I messed it up...) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: EHCI: fix regression during bus resumeAlan Stern2013-03-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1663) fixes a regression caused by commit 6e0c3339a6f19d748f16091d0a05adeb1e1f822b (USB: EHCI: unlink one async QH at a time). In order to avoid keeping multiple QHs in an unusable intermediate state, that commit changed unlink_empty_async() so that it unlinks only one empty QH at a time. However, when the EHCI root hub is suspended, _all_ async QHs need to be unlinked. ehci_bus_suspend() used to do this by calling unlink_empty_async(), but now this only unlinks one of the QHs, not all of them. The symptom is that when the root hub is resumed, USB communications don't work for some period of time. This is because ehci-hcd doesn't realize it needs to restart the async schedule; it assumes that because some QHs are already on the schedule, the schedule must be running. The easiest way to fix the problem is add a new function that unlinks all the async QHs when the root hub is suspended. This patch should be applied to all kernels that have the 6e0c3339a6f1 commit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Adrian Bassett <adrian.bassett@hotmail.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: don't turn on PORT_SUSPEND during port resumeAlan Stern2013-03-181-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1637) cleans up the way ehci-hcd handles end-of-resume port signalling. When the PORT_RESUME bit in the port's status and control register is cleared, we shouldn't be setting the PORT_SUSPEND bit at the same time. Not doing this doesn't seem to have hurt so far, but we might as well do the right thing. Also, the patch replaces an estimated value for what the port status should be following a resume with the actual register value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: improve use of per-port status-change bitsAlan Stern2013-03-181-4/+5
|/ | | | | | | | | | | This patch (as1634) simplifies some of the code associated with the per-port change bits added in EHCI-1.1, and in particular it fixes a bug in the logic of ehci_hub_status_data(). Even if the change bit doesn't indicate anything happened on a particular port, we still have to notify the core about changes to the suspend or reset status. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: fix timer bug affecting port resumeAlan Stern2013-01-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1652) fixes a long-standing bug in ehci-hcd. The driver relies on status polls to know when to stop port-resume signalling. It uses the root-hub status timer to schedule these status polls. But when the driver for the root hub is resumed, the timer is rescheduled to go off immediately -- before the port is ready. When this happens the timer does not get re-enabled, which prevents the port resume from finishing until some other event occurs. The symptom is that when a new device is plugged in, it doesn't get recognized or enumerated until lsusb is run or something else happens. The solution is to re-enable the root-hub status timer after every status poll while a port resume is in progress. This bug hasn't surfaced before now because we never used to try to suspend the root hub in the middle of a port resume (except by coincidence). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Norbert Preining <preining@logic.at> Tested-by: Ming Lei <ming.lei@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: notify usbcore about port resumesAlan Stern2013-01-251-0/+3
| | | | | | | | | | | This patch (as1650) adds calls to the new usb_hcd_{start,end}_port_resume() functions to ehci-hcd. Now EHCI root hubs won't be runtime suspended while they are sending a resume signal to one of their ports. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: prepare to make ehci-hcd a library moduleAlan Stern2012-11-011-4/+2
| | | | | | | | | | | | | | | | | This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: remove ehci_port_power() routineAlan Stern2012-10-311-0/+13
| | | | | | | | | | | | | | | This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: remove unused Link Power Management codeAlan Stern2012-10-311-5/+0
| | | | | | | | | | | | | | | | | | | This patch (as1622) removes the USB-2.1 Link Power Management code from the ehci-hcd driver. This code was never integrated with usbcore, it is full of bugs, and it was not getting used by anybody. However, the debugging code for dumping the LPM-related fields in the EHCI registers is left in place. In theory it might be useful to see these values, even though we don't use them. This essentially amounts to a partial revert of commit aa4d8342988d0c1a79ff19b2ede1e81dfbb16ea5 (USB: EHCI: EHCI 1.1 addendum: preparation) and an almost full revert of commit 48f24970144479c29b8cee6d2e1dbedf6dcf9cfb (USB: EHCI: EHCI 1.1 addendum: Basic LPM feature support) plus its follow-ons. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: add condition for delay during the resumePeter Chen2012-10-241-5/+18
| | | | | | | | | | | | | | | | Without this condition, all controllers will do this delay, and increase the resume time. Only enabled and unsuspended port needs this delay, but Some buggy hardware(like Synopsys usb controller) will clear suspend bit once they receive/send resume signal, so it takes resume bit as consideration. Tested it at Freescale i.mx6q Sabrelite board. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB EHCI/Xen: propagate controller reset information to hypervisorJan Beulich2012-09-181-2/+2
| | | | | | | | | | | | | | | | | | Just like for the in-tree early console debug port driver, the hypervisor - when using a debug port based console - also needs to be told about controller resets, so it can suppress using and then re-initialize the debug port accordingly. Other than the in-tree driver, the hypervisor driver actually cares about doing this only for the device where the debug is port actually in use, i.e. it needs to be told the coordinates of the device being reset (quite obviously, leveraging the addition done for that would likely benefit the in-tree driver too). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: resolve some unlikely racesAlan Stern2012-07-161-4/+23
| | | | | | | | | | | | | | | | | | This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: fix up lockingAlan Stern2012-07-161-12/+29
| | | | | | | | | | | | | | | | | This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: use hrtimer for the I/O watchdogAlan Stern2012-07-161-5/+0
| | | | | | | | | | | | | | | This patch (as1586) replaces the kernel timer used by ehci-hcd as an I/O watchdog with an hrtimer event. Unlike in the current code, the watchdog event is now always enabled whenever any isochronous URBs are active. This will prevent bugs caused by the periodic schedule wrapping around with no completion interrupts; the watchdog handler is guaranteed to scan the isochronous transfers at least once during each iteration of the schedule. The extra overhead will be negligible: one timer interrupt every 100 ms. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: use hrtimer for unlinking empty async QHsAlan Stern2012-07-161-0/+1
| | | | | | | | | | | | | This patch (as1583) changes ehci-hcd to use an hrtimer event for unlinking empty (unused) async QHs instead of using a kernel timer. The check for empty QHs is moved to a new routine, where it doesn't require going through an entire scan of both the async and periodic schedules. And it can unlink multiple QHs at once, unlike the current code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: unlink multiple async QHs togetherAlan Stern2012-07-161-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1582) changes ehci-hcd's strategy for unlinking async QHs. Currently the driver never unlinks more than one QH at a time. This can be inefficient and cause unnecessary delays, since a QH cannot be reused while it is waiting to be unlinked. The new strategy unlinks all the waiting QHs at once. In practice the improvement won't be very big, because it's somewhat uncommon to have two or more QHs waiting to be unlinked at any time. But it does happen, and in any case, doing things this way makes more sense IMO. The change requires the async unlinking code to be refactored slightly. Now in addition to the routines for starting and ending an unlink, there are new routines for unlinking a single QH and starting an IAA cycle. This approach is needed because there are two separate paths for unlinking async QHs: When a transfer error occurs or an URB is cancelled, the QH must be unlinked right away; When a QH has been idle sufficiently long, it is unlinked to avoid consuming DMA bandwidth uselessly. In the first case we want the unlink to proceed as quickly as possible, whereas in the second case we can afford to batch several QHs together and unlink them all at once. Hence the division of labor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: use hrtimer for the IAA watchdogAlan Stern2012-07-161-1/+0
| | | | | | | | | This patch (as1581) replaces the iaa_watchdog kernel timer used by ehci-hcd with an hrtimer event, in keeping with the general conversion to high-res timers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: use hrtimer for (s)iTD deallocationAlan Stern2012-07-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1579) adds an hrtimer event to handle deallocation of iTDs and siTDs in ehci-hcd. Because of the frame-oriented approach used by the EHCI periodic schedule, the hardware can continue to access the Transfer Descriptor for isochronous (or split-isochronous) transactions for up to a millisecond after the transaction completes. The iTD (or siTD) must not be reused before then. The strategy currently used involves putting completed iTDs on a list of cached entries and every so often returning them to the endpoint's free list. The new strategy reduces overhead by putting completed iTDs back on the free list immediately, although they are not reused until it is safe to do so. When the isochronous endpoint stops (its queue becomes empty), the iTDs on its free list get moved to a global list, from which they will be deallocated after a minimum of 2 ms. This delay is what the new hrtimer event is for. Overall this may not be a tremendous improvement over the current code, but to me it seems a lot more clear and logical. In addition, it removes the need for each iTD to keep a reference to the ehci_iso_stream it belongs to, since the iTD never needs to be moved back to the stream's free list from the global list. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: use hrtimer for interrupt QH unlinkAlan Stern2012-07-161-0/+1
| | | | | | | | | | | | | | | This patch (as1577) adds hrtimer support for unlinking interrupt QHs in ehci-hcd. The current code relies on a fixed delay of either 2 or 55 us, which is not always adequate and in any case is totally bogus. Thanks to internal caching, the EHCI hardware may continue to access an interrupt QH for more than a millisecond after it has been unlinked. In fact, the EHCI spec doesn't say how long to wait before using an unlinked interrupt QH. The patch sets the delay to 9 microframes minimum, which ought to be adequate. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: introduce high-res timerAlan Stern2012-07-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: add new root-hub state: STOPPINGAlan Stern2012-07-161-2/+1
| | | | | | | | | | | | | | | This patch (as1571) adds a new state for ehci-hcd's root hubs: EHCI_RH_STOPPING. This value is used at times when the root hub is being stopped and we don't know whether or not the hardware has finished all its DMA yet. Although the purpose may not be apparent, this distinction will come in useful later on. Future patches will avoid actions that depend on the root hub being operational (like turning on the async or periodic schedules) when they see the state is EHCI_RH_STOPPING. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: rename "reclaim"Alan Stern2012-07-161-1/+1
| | | | | | | | | | | | | | This patch (as1569) renames the ehci->reclaim list in ehci-hcd. The word "reclaim" is used in the EHCI specification to mean something quite different, and "unlink_next" is more descriptive of the list's purpose anyway. Similarly, the "reclaim" field in the ehci_stats structure is renamed "iaa", which is more meaningful (to experts, anyway) and is a better match for the "lost_iaa" field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: remove unneeded suspend/resume codeAlan Stern2012-07-161-12/+1
| | | | | | | | | | This patch (as1566) removes the code in ehci-hcd's resume routines which tries to restart or cancel any transfers left active while the root hub or controller was asleep. This code isn't necessary, because all URBs are terminated before the root hub is suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EHCI: centralize controller suspend/resumeAlan Stern2012-07-091-2/+2
| | | | | | | | | | | | | | | | | This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: define extension registers like normal onesAlan Stern2012-06-261-18/+8
| | | | | | | | | | This patch (as1562) cleans up the definitions of the EHCI extended registers to be consistent with the definitions of the standard registers. This makes the code look a lot nicer, with no functional change. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phyRichard Zhao2012-06-131-1/+1
| | | | | | | | | | - to decrease redundant since both ehci_hcd and ohci_hcd have the same variable - it helps access phy in usb core code - phy is more meaningful than transceiver Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EHCI: maintain the ehci->command value properlyAlan Stern2012-04-231-1/+1
| | | | | | | | | | | | | | The ehci-hcd driver is a little haphazard about keeping track of the state of the USBCMD register. The ehci->command field is supposed to hold the register's value (apart from a few special bits) at all times, but it isn't maintained properly. This patch (as1543) cleans up the situation. It keeps ehci->command up-to-date, and uses that value rather than reading the register from the hardware whenever possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.4-rc4 into usb-next.Greg Kroah-Hartman2012-04-221-11/+9
|\ | | | | | | | | | | | | | | | | This resolves the conflict in: drivers/usb/host/ehci-fsl.c And picks up loads of xhci bugfixes to make it easier for others to test with. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: EHCI: remove PORT_RWC_BITS when clearing USB_PORT_FEAT_ENABLEStephen Warren2012-04-191-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the ClearPortFeature/USB_PORT_FEAT_ENABLE case, ehci_hub_control() would read from status_reg, clear PORT_PE, and write the result back to status_reg. This would clear any bits in PORT_RWC_BITS that were set in the registers. Fix this by masking these bits off before the write. Since this masking is common across all ClearPortFeature cases, move it into a single early location to avoid duplicating it. Remove the same bugfix from ehci-tegra.c's tegra_ehci_hub_control(), now that this case is correctly handled by the core. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: EHCI: remove wrong debug message for port speedPeter Chen2012-04-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | It displays wrong debug message if we plug in a full/low speed device at port for builtin TT controller. We can get device/port speed information at following code of hub_port_init, so it is better to replace it with debug message of "reset complete". Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | EHCI: keep track of ports being resumed and indicate in hub_status_dataAlan Stern2012-04-091-15/+16
|/ | | | | | | | | | | | | | This patch (as1537) adds a bit-array to ehci-hcd for keeping track of which ports are undergoing a resume transition. If any of the bits are set when ehci_hub_status_data() is called, the routine will return a nonzero value even if no ports have any status changes pending. This will allow usbcore to handle races between root-hub suspend and port wakeup. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Chen Peter-B29397 <B29397@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'xceiv-for-v3.4' of ↵Greg Kroah-Hartman2012-03-011-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB: transceiver changes for 3.4 Here we have a big rework done by Heikki Krogerus (thanks) which splits OTG functionality away from transceivers. We have known for quite a long time that struct otg_transceiver was a bad name for the structure, considering transceiver is far from being OTG-specific (see 4e67185).
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 02:28:11 +0000