summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-mem.c
Commit message (Collapse)AuthorAgeFilesLines
* xhci: Remove device endpoints from bandwidth list when freeing the deviceMathias Nyman2022-11-031-8/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream. Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()Jianglei Nie2022-10-261-1/+6
| | | | | | | | | | | | | | | | | | | [ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ] xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xhci: make xhci_handshake timeout for xhci_reset() adjustableMathias Nyman2022-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 14073ce951b5919da450022c050772902f24f054 upstream. xhci_reset() timeout was increased from 250ms to 10 seconds in order to give Renesas 720201 xHC enough time to get ready in probe. xhci_reset() is called with interrupts disabled in other places, and waiting for 10 seconds there is not acceptable. Add a timeout parameter to xhci_reset(), and adjust it back to 250ms when called from xhci_stop() or xhci_shutdown() where interrupts are disabled, and successful reset isn't that critical. This solves issues when deactivating host mode on platforms like SM8450. For now don't change the timeout if xHC is reset in xhci_resume(). No issues are reported for it, and we need the reset to succeed. Locking around that reset needs to be revisited later. Additionally change the signed integer timeout parameter in xhci_handshake() to a u64 to match the timeout value we pass to readl_poll_timeout_atomic() Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.") Cc: stable@vger.kernel.org Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: Fix port minor revisionThinh Nguyen2021-05-221-0/+9
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 64364bc912c01b33bba6c22e3ccb849bfca96398 ] Some hosts incorrectly use sub-minor version for minor version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310). Currently the xHCI driver works around this by just checking for minor revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2, checking this gets a bit cumbersome. Since there is no USB release with bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is incorrect. Let's try to fix this and use the minor revision that matches with the USB/xHCI spec to help with the version checking within the driver. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.Mathias Nyman2020-02-281-3/+9
| | | | | | | | | | | | | | | | | | | | | | commit f148b9f402ef002b57bcff3964d45abc8ffb6c3f upstream. A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller <cmdrrdo@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg2019-12-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ce91f1a43b37463f517155bdfbd525eb43adbd1a ] When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xhci: xhci-mem: off by one in xhci_stream_id_to_ring()Dan Carpenter2018-07-171-1/+1
| | | | | | | | | | | | | commit 313db3d6488bb03b61b99de9dbca061f1fd838e1 upstream. The > should be >= here so that we don't read one element beyond the end of the ep->stream_info->stream_rings[] array. Fixes: e9df17eb1408 ("USB: xhci: Correct assumptions about number of rings per endpoint.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Fix kernel oops in trace_xhci_free_virt_deviceZhengjun Xing2018-07-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d850c1658328e757635a46763783c6fd56390dcb upstream. commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] <IRQ> [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] </IRQ> Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: zero usb device slot_id member when disabling and freeing a xhci slotMathias Nyman2018-05-251-0/+2
| | | | | | | | | | | | | | | | | | [ Upstream commit a400efe455f7b61ac9a801ac8d0d01f8c8d82dd5 ] set udev->slot_id to zero when disabling and freeing the xhci slot. Prevents usb core from calling xhci with a stale slot id. xHC controller may be reset during resume to recover from some error. All slots are unusable as they are disabled and freed. xhci driver starts slot enumeration again from 1 in the order they are enabled. In the worst case a stale udev->slot_id for one device matches a newly enabled slot_id for a different device, causing us to perform a action on the wrong device. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Don't add a virt_dev to the devs array before it's fully allocatedMathias Nyman2017-12-201-4/+11
| | | | | | | | | | | | | | | | | | | | commit 5d9b70f7d52eb14bb37861c663bae44de9521c35 upstream. Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: fix panic in xhci_free_virt_devices_depth_firstYu Chen2017-12-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 80e457699a8dbdd70f2d26911e46f538645c55fc upstream. Check vdev->real_port 0 to avoid panic [ 9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108 [ 9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570 [ 9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8 [ 9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0 [ 9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8 [ 9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70 [ 9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108 [ 9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40 [ 9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120 [ 9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210 [ 9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0 [ 9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488 [ 9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8 [ 9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490 [ 9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0 [ 9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100 [ 9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50 The problem can occur if xhci_plat_remove() is called shortly after xhci_plat_probe(). While xhci_free_virt_devices_depth_first been called before the device has been setup and get real_port initialized. The problem occurred on Hikey960 and was reproduced by Guenter Roeck on Kevin with chromeos-4.4. Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first") Cc: Guenter Roeck <groeck@google.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fan Ning <fanning4@hisilicon.com> Signed-off-by: Li Rui <lirui39@hisilicon.com> Signed-off-by: yangdi <yangdi10@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 4.12-rc6 into usb-nextGreg Kroah-Hartman2017-06-201-2/+5
|\ | | | | | | | | | | We want the USB fixes in here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: xhci: Fix USB 3.1 supported protocol parsingYD Tseng2017-06-121-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xHCI host controllers can have both USB 3.1 and 3.0 extended speed protocol lists. If the USB3.1 speed is parsed first and 3.0 second then the minor revision supported will be overwritten by the 3.0 speeds and the USB3 roothub will only show support for USB 3.0 speeds. This was the case with a xhci controller with the supported protocol capability listed below. In xhci-mem.c, the USB 3.1 speed is parsed first, the min_rev of usb3_rhub is set as 0x10. And then USB 3.0 is parsed. However, the min_rev of usb3_rhub will be changed to 0x00. If USB 3.1 device is connected behind this host controller, the speed of USB 3.1 device just reports 5G speed using lsusb. 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 01 08 00 00 00 00 00 40 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 02 08 10 03 55 53 42 20 01 02 00 00 00 00 00 00 //USB 3.1 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 02 08 00 03 55 53 42 20 03 06 00 00 00 00 00 00 //USB 3.0 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 02 08 00 02 55 53 42 20 09 0E 19 00 00 00 00 00 //USB 2.0 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This patch fixes the issue by only owerwriting the minor revision if it is higher than the existing one. [reword commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: YD Tseng <yd_tseng@asmedia.com.tw> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: remove endpoint ring cacheMathias Nyman2017-06-151-75/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | Anurag Kumar Vulisha reported several issues with xhci endpoint ring caching. 31 Rings are cached per device before a ring is freed. These cached rings are not used as default if a new ring is needed. They are only used if the driver fails to allocate memory for a ring. The current ring cache is more a reason to why we run out memory than a help when we actually do so. Anurag Kumar Vulisha tried to use cached rings as a first option and found new issues with cached ring initialization. Cached rings were first zeroed and then manually reinitialized with link trbs etc, but forgetting to set some important bits like cycle toggle bit. Remove the ring cache completely as it's a faulty premature optimization eating memory Reported-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Tested-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: remove GFP_DMA flag from allocationMatthias Lange2017-05-181-1/+1
| | | | | | | | | | | | | There is no reason to restrict allocations to the first 16MB ISA DMA addresses. It is causing problems in a virtualization setup with enabled IOMMU (x86_64). The result is that USB is not working in the VM. CC: <stable@vger.kernel.org> Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci-mem: allocate zeroed Scratchpad BufferPeter Chen2017-05-181-1/+1
| | | | | | | | | | | | | | | | According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: xhci: use max-port defineJohan Hovold2017-05-171-3/+4
| | | | | | | | Use the new define for the maximum number of SuperSpeed ports instead of a constant when allocating xHCI root hubs. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: print correct command ring addressPeter Chen2017-04-191-1/+1
| | | | | | | | | Print correct command ring address using 'val_64'. Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: delete sp_dma_buffers for scratchpadPeter Chen2017-04-191-14/+4
| | | | | | | | | We already have sp_array to store each scratch buffer address for xHC, it doesn't need another sp_dma_buffers array to store it. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: using correct specification chapter reference for DCBAAPPeter Chen2017-04-191-1/+1
| | | | | | | | | Using correct specification chapter reference for DCBAAP (Device Context Base Address Array Pointer). Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: bInterval quirk for TI TUSB73x0Roger Quadros2017-04-081-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | As per [1] issue #4, "The periodic EP scheduler always tries to schedule the EPs that have large intervals (interval equal to or greater than 128 microframes) into different microframes. So it maintains an internal counter and increments for each large interval EP added. When the counter is greater than 128, the scheduler rejects the new EP. So when the hub re-enumerated 128 times, it triggers this condition." This results in Bandwidth error when devices with periodic endpoints (ISO/INT) having bInterval > 7 are plugged and unplugged several times on a TUSB73x0 XHCI host. Workaround this issue by limiting the bInterval to 7 (i.e. interval to 6) for High-speed or faster periodic endpoints. [1] - http://www.ti.com/lit/er/sllz076/sllz076.pdf Cc: stable <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: remove enq_updates and deq_updates from ringLu Baolu2017-04-081-3/+0
| | | | | | | | | | | | enq_updates and deq_updates were introduced in the first place to check whether an xhci hardware is able to respond to trbs enqueued in the ring. We now have trb tracers to trace every single enqueue/dequeue trb. It's time to remove them and the associated debugging code. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: remove error messages for failed memory allocationLu Baolu2017-04-081-1/+0
| | | | | | | | Omit extra messages for memory allocation failure. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: add xhci_log_ring trace eventsLu Baolu2017-04-081-0/+4
| | | | | | | | | | | | | | | | | | This patch creates a new event class called xhci_log_ring, and defines the events used for tracing the change of all kinds of rings used by an xhci host. An xHCI ring is basically a memory block shared between software and hardware. By tracing changes of rings, it makes the life easier for debugging hardware or software problems. This info can be used, later, to print, in a human readable way, the life cycle of an xHCI ring using the trace-cmd tool and the appropriate plugin. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: use bus->sysdev for DMA configurationArnd Bergmann2017-03-231-6/+6
| | | | | | | | | | | | | | | | | For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. So, set the dma for xhci from sysdev. sysdev is pointing to device that is known to the system firmware or hardware. Cc: Baolin Wang <baolin.wang@linaro.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: simplify how we store TDs in urb private dataMathias Nyman2017-01-251-4/+1
| | | | | | | | | | | | | | | | | | | | | Instead of storing a zero length array of td pointers, and then allocate memory both for the td pointer array and the td's, just use a zero length array of actual td's in urb private data. old: struct urb_priv { struct xhci_td *td[0] } new: struct urb_priv { struct xhci_td td[0] } Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: add xhci_virt_device tracerFelipe Balbi2017-01-251-0/+7
| | | | | | | | | | Let's start tracing at least part of an xhci_virt_device lifetime. We might want to extend this tracepoint class later, but for now it already exposes quite a bit of valuable information. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: convert several if() to a single switch statementFelipe Balbi2017-01-251-4/+6
| | | | | | | | | | when getting endpoint type, a switch statement looks better than a series of if () branches. There are no functional changes with this patch, cleanup only. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci: change pre-increments to post-incrementsFelipe Balbi2017-01-251-4/+4
| | | | | | | | | This is a cleanup patch only, no functional changes. The idea is just to make sure for loops look the same all over the driver. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Fix race related to abort operationOGAWA Hirofumi2017-01-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current abort operation has race. xhci_handle_command_timeout() xhci_abort_cmd_ring() xhci_write_64(CMD_RING_ABORT) xhci_handshake(5s) do { check CMD_RING_RUNNING udelay(1) ... COMP_CMD_ABORT event COMP_CMD_STOP event xhci_handle_stopped_cmd_ring() restart cmd_ring CMD_RING_RUNNING become 1 again } while () return -ETIMEDOUT xhci_write_64(CMD_RING_ABORT) /* can abort random command */ To do abort operation correctly, we have to wait both of COMP_CMD_STOP event and negation of CMD_RING_RUNNING. But like above, while timeout handler is waiting negation of CMD_RING_RUNNING, event handler can restart cmd_ring. So timeout handler never be notice negation of CMD_RING_RUNNING, and retry of CMD_RING_ABORT can abort random command (BTW, I guess retry of CMD_RING_ABORT was workaround of this race). To fix this race, this moves xhci_handle_stopped_cmd_ring() to xhci_abort_cmd_ring(). And timeout handler waits COMP_CMD_STOP event. At this point, timeout handler is owner of cmd_ring, and safely restart cmd_ring by using xhci_handle_stopped_cmd_ring(). [FWIW, as bonus, this way would be easily extend to add CMD_RING_PAUSE operation] [locks edited as patch is rebased on other locking fixes -Mathias] Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Use delayed_work instead of timer for command timeoutOGAWA Hirofumi2017-01-031-4/+3
| | | | | | | | | | | This is preparation to fix abort operation race (See "xhci: Fix race related to abort operation"). To make timeout sleepable, use delayed_work instead of timer. [change a newly added pending timer fix to pending work -Mathias] Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: free xhci virtual devices with leaf nodes firstMathias Nyman2017-01-031-2/+36
| | | | | | | | | | | | | | | | | the tt_info provided by a HS hub might be in use to by a child device Make sure we free the devices in the correct order. This is needed in special cases such as when xhci controller is reset when resuming from hibernate, and all virt_devices are freed. Also free the virt_devices starting from max slot_id as children more commonly have higher slot_id than parent. CC: <stable@vger.kernel.org> Reported-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-for-v4.10' of ↵Greg Kroah-Hartman2016-11-181-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.10 merge window One big merge this time with a total of 166 non-merge commits. Most of the work, by far, is on dwc2 this time (68.2%) with dwc3 a far second (22.5%). The remaining 9.3% are scattered on gadget drivers. The most important changes for dwc2 are the peripheral side DMA support implemented by Synopsys folks and support for the new IOT dwc2 compatible core from Synopsys. In dwc3 land we have support for high-bandwidth, high-speed isochronous endpoints and some non-critical fixes for large scatter lists. Apart from these, we have our usual set of cleanups, non-critical fixes, etc.
| * usb: host: xhci: purge GET_MAX_PACKET()Felipe Balbi2016-11-031-2/+2
| | | | | | | | | | | | | | | | usb_endpoint_maxp() is now returning maxpacket correctly - iow only bits 10:0. We can finaly remove XHCI's private GET_MAX_PACKET macro. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: host: xhci: make use of new usb_endpoint_maxp_mult()Felipe Balbi2016-11-031-3/+3
| | | | | | | | | | | | | | | | | | We have introduced a helper to calculate multiplier value from wMaxPacketSize. Start using it. Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | usb: xhci-mem: use passed in GFP flags instead of GFP_KERNELDan Carpenter2016-11-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | We normally use the passed in gfp flags for allocations, it's just these two which were missed. Fixes: 22d45f01a836 ("usb/xhci: replace pci_*_consistent() with dma_*_coherent()") Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: remove the use of xhci->addr_devLu Baolu2016-11-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | xhci->addr_dev is used for the completion of both address device and enable slot commands. It's shared by enumerations of all USB devices connected to an xhci host. Hence, it's just a source for possible races. Since we've introduced command structure and the command queue to xhci driver. It is time to get rid of addr_dev and use the completion in the command structure instead. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: cleanup cmd_completion in xhci_virt_deviceLu Baolu2016-11-141-1/+0
|/ | | | | | | | | | cmd_completion in struct xhci_virt_device is legacy. With command structure and command queue introduced in xhci, cmd_completion is not used any more. This patch removes it. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: TD-fragment, align the unsplittable case with a bounce bufferMathias Nyman2016-06-261-28/+46
| | | | | | | | | | | | | | | | | | | If the last trb before a link is not packet size aligned, and is not splittable then use a bounce buffer for that chunk of max packet size unalignable data. Allocate a max packet size bounce buffer for every segment of a bulk endpoint ring at the same time as allocating the ring. If we need to align the data before the link trb in that segment then copy the data to the segment bounce buffer, dma map it, and enqueue it. Once the td finishes, or is cancelled, unmap it. For in transfers we need to first map the bounce buffer, then queue it, after it finishes, copy the bounce buffer to the original sg list, and finally unmap it Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: fix wild pointers in xhci_mem_cleanupLu Baolu2016-04-131-0/+6
| | | | | | | | | | | | This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Add SuperSpeedPlus high bandwidth isoc support to xhci endpointsMathias Nyman2016-02-141-2/+11
| | | | | | | | | | | | | | | | SuperSpeedPlus doubled the number of transactions per service interval the isoc endpoints supports. To support this, xhci 1.1 added Large ESIT Capability (LEC), which takes into use new bits in the endpoint context to fit the parameters. If xhci supports LEC, and the device has a SuperSpeedPlus Isoc companion descriptor then take into use the high bits of max esit payload, and skip calculating the Mult field as it wouldn't fit. LEC capable host will calculate the Mult based on other paramenters. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: refactor and cleanup endpoint initialization.Mathias Nyman2016-02-141-94/+67
| | | | | | | | | | | xhci_endpoint_init() and helper functions were a bit messy. Adding the higher bandwidth SuperSpeedPlus Isoc support on top of it would make it even harder to read. No functional changes. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: set slot context speed field to SuperSpeedPlus for USB 3.1 SSP devicesMathias Nyman2016-02-031-0/+3
| | | | | | | | The speed field of the input slot context should represent the speed the device is working at. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices.Mathias Nyman2016-02-031-3/+6
| | | | | | | | In most cases the devices with the speed set to USB_SPEED_SUPER_PLUS are handled like regular SuperSpeed devices. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb : replace dma_pool_alloc and memset with dma_pool_zallocSaurabh Sengar2015-12-011-4/+2
| | | | | | | | replace dma_pool_alloc and memset with a single call to dma_pool_zalloc Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: rework xhci extended capability list parsing functionsMathias Nyman2015-12-011-46/+27
| | | | | | | | | | | | | | | | | | | | Replace the existing two extended capability parsing helper functions with one called xhci_find_next_ext_cap(). The extended capabilities are read both in pci-quirks before xhci driver is loaded, and inside the xhci driver when adding ports. The existing helpers did not suit well for these cases and a lot of custom parsing code was needed. The new helper function simplifies these two cases a lot. The motivation for this rework was that code to support xhci debug capability needed to parse extended capabilities, and it included yet another capability parsing helper specific for its needs. With this solution it debug capability code can use this new helper as well Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: use debug level when printing out interval rounding messagesMathias Nyman2015-12-011-1/+1
| | | | | | | | | | Don't use dev_warn() for intened behaviour, use dev_dbg() Rounding down the interval to the nearest power of 2 is required by xhci specs. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: drop null test before destroy functionsJulia Lawall2015-10-041-8/+4
| | | | | | | | | | | | | | | | Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: parse xhci protocol speed ID list for usb 3.1 usageMathias Nyman2015-10-041-1/+37
| | | | | | | | | | | | | xhci 1.1 controllers that support USB 3.1 must provide a protocol speed ID (PSI) list to inform the driver of the supported speeds. The PSI list can be read from the xhci supported protocol extended capabilities. The PSI values will be used to create a USB 3.1 SuperSpeedPlus capability descriptor for the xhci USB 3.1 roothub. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: init command timeout timer earlier to avoid deleting it uninitializedMathias Nyman2015-09-211-6/+5
| | | | | | | | | | | | | | Don't check if timer is running with a timer_pending() before deleting it with del_timer_sync(), this defies the whole point of the sync part and can cause a possible race. Instead we just want to make sure the timer is initialized early enough before we have a chance to delete it. Cc: <stable@vger.kernel.org> Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-28 11:27:19 +0000