summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* USB: serial: cp210x: add ELDAT Easywave RX09 idJohan Hovold2018-04-081-0/+1
| | | | | | | | | | | | commit 1f1e82f74c0947e40144688c9e36abe4b3999f49 upstream. Add device id for ELDAT Easywave RX09 tranceiver. Reported-by: Jan Jansen <nattelip@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulatorClemens Werther2018-04-082-0/+7
| | | | | | | | | | | | | commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream. Add device id for Harman FirmwareHubEmulator to make the device auto-detectable by the driver. Signed-off-by: Clemens Werther <clemens.werther@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ftdi_sio: add RT Systems VX-8 cableMajor Hayden2018-04-082-0/+4
| | | | | | | | | | | | | | commit 9608e5c0f079390473b484ef92334dfd3431bb89 upstream. This patch adds a device ID for the RT Systems cable used to program Yaesu VX-8R/VX-8DR handheld radios. It uses the main FTDI VID instead of the common RT Systems VID. Signed-off-by: Major Hayden <major@mhtx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: Improve gadget state disconnection handlingJohn Stultz2018-04-081-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 upstream. In the earlier commit dad3f793f20f ("usb: dwc2: Make sure we disconnect the gadget state"), I was trying to fix up the fact that we somehow weren't disconnecting the gadget state, so that when the OTG port was plugged in the second time we would get warnings about the state tracking being wrong. (This seems to be due to a quirk of the HiKey board where we do not ever get any otg interrupts, particularly the session end detected signal. Instead we only see status change interrupt.) The fix there was somewhat simple, as it just made sure to call dwc2_hsotg_disconnect() before we connected things up in OTG mode, ensuring the state handling didn't throw errors. But in looking at a different issue I was seeing with UDC state handling, I realized that it would be much better to call dwc2_hsotg_disconnect when we get the state change signal moving to host mode. Thus, this patch removes the earlier disconnect call I added and moves it (and the needed locking) to the host mode transition. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: Fix potential memory leak in xhci_disable_slot()Lu Baolu2018-03-283-24/+11
| | | | | | | | | | | | | | | | | | | | | commit cd3f1790b006d91786728c20a01da21ee277aff1 upstream. xhci_disable_slot() allows the invoker to pass a command pointer as paramenter. Otherwise, it will allocate one. This will cause memory leak when a command structure was allocated inside of this function while queuing command trb fails. Another problem comes up when the invoker passed a command pointer, but xhci_disable_slot() frees it when it detects a dead host. This patch fixes these two problems by removing the command parameter from xhci_disable_slot(). Fixes: f9e609b82479 ("usb: xhci: Add helper function xhci_disable_slot().") Cc: Guoqing Zhang <guoqing.zhang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: Disable slot even when virt-dev is nullLu Baolu2018-03-282-4/+3
| | | | | | | | | | | | | | | | | | | | | | commit b64149ca016c25f30b39ac5a8f37cfb9017e19bb upstream. xhci_disable_slot() is a helper for disabling a slot when a device goes away or recovers from error situations. Currently, it checks the corespoding virt-dev pointer and returns directly (w/o issuing disable slot command) if it's null. This is unnecessary and will cause problems in case where virt-dev allocation fails and xhci_disable_slot() is called to roll back the hardware state. Refer to the implementation of xhci_alloc_dev(). This patch removes lines to check virt-dev in xhci_disable_slot(). Fixes: f9e609b82479 ("usb: xhci: Add helper function xhci_disable_slot().") Cc: Guoqing Zhang <guoqing.zhang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: Fix GDBGFIFOSPACE_TYPE valuesThinh Nguyen2018-03-211-7/+9
| | | | | | | | | | | | | | | commit b16ea8b9492e99e03b1269fe93ebdbf8e4eabf8a upstream. The FIFO/Queue type values are incorrect. Correct them according to DWC_usb3 programming guide section 1.2.27 (or DWC_usb31 section 1.2.25). Additionally, this patch includes ProtocolStatusQ and AuxEventQ types. Fixes: cf6d867d3b57 ("usb: dwc3: core: add fifo space helper") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()Wei Yongjun2018-03-211-0/+1
| | | | | | | | | | | | | commit 8874ae5f15f3feef3b4a415b9aed51edcf449aa1 upstream. Add the missing platform_device_put() before return from bdc_pci_probe() in the platform_device_add_resources() error handling case. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ledtrig-usbport: fix of-node leakJohan Hovold2018-03-191-1/+7
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 03310a15484ab6a8f6d91bbf7fe486b17275c09a ] This code looks up a USB device node from a given parent USB device but never dropped its reference to the returned node. As only the address of the node is used for a later matching, the reference can be dropped immediately. Note that this trigger implementation confuses the description of the USB device connected to a port with the port itself (which does not have a device-tree representation). Fixes: 4f04c210d031 ("usb: core: read USB ports from DT in the usbport LED trigger driver") Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: Fix lock-up on ID change during system suspend/resumeRoger Quadros2018-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | commit 084a804e01205bcd74cd0849bc72cb5c88f8e648 upstream. To reproduce the lock up do the following - connect otg host adapter and a USB device to the dual-role port so that it is in host mode. - suspend to mem. - disconnect otg adapter. - resume the system. If we call dwc3_host_exit() before tasks are thawed xhci_plat_remove() seems to lock up at the second usb_remove_hcd() call. To work around this we queue the _dwc3_set_mode() work on the system_freezable_wq. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: <stable@vger.kernel.org> # v4.12+ Suggested-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb()Xinyong2018-03-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1a087f032111a88e826877449dfb93ceb22b78b9 upstream. When I debug a kernel crash issue in funcitonfs, found ffs_data.ref overflowed, While functionfs is unmounting, ffs_data is put twice. Commit 43938613c6fd ("drivers, usb: convert ffs_data.ref from atomic_t to refcount_t") can avoid refcount overflow, but that is risk some situations. So no need put ffs data in ffs_fs_kill_sb, already put in ffs_data_closed. The issue can be reproduced in Mediatek mt6763 SoC, ffs for ADB device. KASAN enabled configuration reports use-after-free errro. BUG: KASAN: use-after-free in refcount_dec_and_test+0x14/0xe0 at addr ffffffc0579386a0 Read of size 4 by task umount/4650 ==================================================== BUG kmalloc-512 (Tainted: P W O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in ffs_fs_mount+0x194/0x844 age=22856 cpu=2 pid=566 alloc_debug_processing+0x1ac/0x1e8 ___slab_alloc.constprop.63+0x640/0x648 __slab_alloc.isra.57.constprop.62+0x24/0x34 kmem_cache_alloc_trace+0x1a8/0x2bc ffs_fs_mount+0x194/0x844 mount_fs+0x6c/0x1d0 vfs_kern_mount+0x50/0x1b4 do_mount+0x258/0x1034 INFO: Freed in ffs_data_put+0x25c/0x320 age=0 cpu=3 pid=4650 free_debug_processing+0x22c/0x434 __slab_free+0x2d8/0x3a0 kfree+0x254/0x264 ffs_data_put+0x25c/0x320 ffs_data_closed+0x124/0x15c ffs_fs_kill_sb+0xb8/0x110 deactivate_locked_super+0x6c/0x98 deactivate_super+0xb0/0xbc INFO: Object 0xffffffc057938600 @offset=1536 fp=0x (null) ...... Call trace: [<ffffff900808cf5c>] dump_backtrace+0x0/0x250 [<ffffff900808d3a0>] show_stack+0x14/0x1c [<ffffff90084a8c04>] dump_stack+0xa0/0xc8 [<ffffff900826c2b4>] print_trailer+0x158/0x260 [<ffffff900826d9d8>] object_err+0x3c/0x40 [<ffffff90082745f0>] kasan_report_error+0x2a8/0x754 [<ffffff9008274f84>] kasan_report+0x5c/0x60 [<ffffff9008273208>] __asan_load4+0x70/0x88 [<ffffff90084cd81c>] refcount_dec_and_test+0x14/0xe0 [<ffffff9008d98f9c>] ffs_data_put+0x80/0x320 [<ffffff9008d9d904>] ffs_fs_kill_sb+0xc8/0x110 [<ffffff90082852a0>] deactivate_locked_super+0x6c/0x98 [<ffffff900828537c>] deactivate_super+0xb0/0xbc [<ffffff90082af0c0>] cleanup_mnt+0x64/0xec [<ffffff90082af1b0>] __cleanup_mnt+0x10/0x18 [<ffffff90080d9e68>] task_work_run+0xcc/0x124 [<ffffff900808c8c0>] do_notify_resume+0x60/0x70 [<ffffff90080866e4>] work_pending+0x10/0x14 Cc: stable@vger.kernel.org Signed-off-by: Xinyong <xinyong.fang@linux.alibaba.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: usbmon: Read text within supplied buffer sizePete Zaitcev2018-03-191-48/+78
| | | | | | | | | | | | | commit a5f596830e27e15f7a0ecd6be55e433d776986d8 upstream. This change fixes buffer overflows and silent data corruption with the usbmon device driver text file read operations. Signed-off-by: Fredrik Noring <noring@nocrew.org> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: quirks: add control message delay for 1b1c:1b20Danilo Krummrich2018-03-192-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: vudc: fix null pointer dereference on udc->lockColin Ian King2018-03-191-2/+6
| | | | | | | | | | | | | | | | | commit df3334c223a033f562645712e832ca4cbb326bbf upstream. Currently the driver attempts to spin lock on udc->lock before a NULL pointer check is performed on udc, hence there is a potential null pointer dereference on udc->lock. Fix this by moving the null check on udc before the lock occurs. Fixes: ea6873a45a22 ("usbip: vudc: Add SysFS infrastructure for VUDC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.hTeijo Kinnunen2018-03-191-0/+7
| | | | | | | | | | | | | | commit 5126a504b63d82785eaece3a9c30c660b313785a upstream. This USB-SATA controller seems to be similar with JMicron bridge 152d:2566 already on the list. Adding it here fixes "Invalid field in cdb" errors. Signed-off-by: Teijo Kinnunen <teijo.kinnunen@code-q.fi> Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uas: fix comparison for error codeOliver Neukum2018-03-191-1/+1
| | | | | | | | | | | | | commit 9a513c905bb95bef79d96feb08621c1ec8d8c4bb upstream. A typo broke the comparison. Fixes: cbeef22fd611 ("usb: uas: unconditionally bring back host after reset") Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@kernel.org Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: fix endpoint context tracer outputMathias Nyman2018-03-191-10/+12
| | | | | | | | | | | | | | commit 97ef0faf575e03b352553f92c9430cb4c0431436 upstream. Fix incorrent values showed for max Primary stream and Linear stream array (LSA) values in the endpoint context decoder. Fixes: 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Fix front USB ports on ASUS PRIME B350M-AKai-Heng Feng2018-03-193-0/+7
| | | | | | | | | | | | | | | | | | | | commit 191edc5e2e515aab1075a3f0ef23599e80be5f59 upstream. When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the xHC stops working: [ 549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110 [ 549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110) Delay before running xHC command CMD_RUN can workaround the issue. Use a new quirk to make the delay only targets to the affected xHC. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci-rcar: add support for r8a77965Yoshihiro Shimoda2018-03-191-0/+4
| | | | | | | | | | | | | commit 015dbeb2282030bf56762e21d25f09422edfd750 upstream. This patch adds support for r8a77965 (R-Car M3-N). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx pathYoshihiro Shimoda2018-02-281-0/+5
| | | | | | | | | | | | | | | | | | | | commit 17aa31f13cad25daa19d3f923323f552e87bc874 upstream. This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_fs: Use config_ep_by_speed()Jack Pham2018-02-281-31/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 675272d092e4a5570bace92593776f7348daf4c5 upstream. In commit 2bfa0719ac2a ("usb: gadget: function: f_fs: pass companion descriptor along") there is a pointer arithmetic bug where the comp_desc is obtained as follows: comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + USB_DT_ENDPOINT_SIZE); Since ds is a pointer to usb_endpoint_descriptor, adding 7 to it ends up going out of bounds (7 * sizeof(struct usb_endpoint_descriptor), which is actually 7*9 bytes) past the SS descriptor. As a result the maxburst value will be read incorrectly, and the UDC driver will also get a garbage comp_desc (assuming it uses it). Since Felipe wrote, "Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though", let's finally do it. This allows the other usb_ep fields to be properly populated, such as maxpacket and mult. It also eliminates the awkward speed-based descriptor lookup since config_ep_by_speed() does that already using the ones found in struct usb_function. Fixes: 2bfa0719ac2a ("usb: gadget: function: f_fs: pass companion descriptor along") Cc: stable@vger.kernel.org Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_fs: Process all descriptors during bindJack Pham2018-02-281-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6cf439e0d37463e42784271179c8a308fd7493c6 upstream. During _ffs_func_bind(), the received descriptors are evaluated to prepare for binding with the gadget in order to allocate endpoints and optionally set up OS descriptors. However, the high- and super-speed descriptors are only parsed based on whether the gadget_is_dualspeed() and gadget_is_superspeed() calls are true, respectively. This is a problem in case a userspace program always provides all of the {full,high,super,OS} descriptors when configuring a function. Then, for example if a gadget device is not capable of SuperSpeed, the call to ffs_do_descs() for the SS descriptors is skipped, resulting in an incorrect offset calculation for the vla_ptr when moving on to the OS descriptors that follow. This causes ffs_do_os_descs() to fail as it is now looking at the SS descriptors' offset within the raw_descs buffer instead. _ffs_func_bind() should evaluate the descriptors unconditionally, so remove the checks for gadget speed. Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Co-Developed-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Mayank Rana <mrana@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: musb: host: don't start next rx urb if current one failed"Bin Liu2018-02-281-7/+1
| | | | | | | | | | | | | | | | | | | commit 44eb5e12b845cc8a0634f21b70ef07d774eb4b25 upstream. This reverts commit dbac5d07d13e330e6706813c9fde477140fb5d80. commit dbac5d07d13e ("usb: musb: host: don't start next rx urb if current one failed") along with commit b5801212229f ("usb: musb: host: clear rxcsr error bit if set") try to solve the issue described in [1], but the latter alone is sufficient, and the former causes the issue as in [2], so now revert it. [1] https://marc.info/?l=linux-usb&m=146173995117456&w=2 [2] https://marc.info/?l=linux-usb&m=151689238420622&w=2 Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ldusb: add PIDs for new CASSY devices supported by this driverKarsten Koop2018-02-281-0/+6
| | | | | | | | | | | | commit 52ad2bd8918158266fc88a05f95429b56b6a33c5 upstream. This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by: Karsten Koop <kkoop@ld-didactic.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: ep0: Reset TRB counter for ep0 INThinh Nguyen2018-02-281-1/+6
| | | | | | | | | | | | | | | | | commit f035d139ffece7b6a7b8bfb17bd0ba715ee57a04 upstream. DWC3 tracks TRB counter for each ep0 direction separately. In control read transfer completion handler, the driver needs to reset the TRB enqueue counter for ep0 IN direction. Currently the driver only resets the TRB counter for control OUT endpoint. Check for the data direction and properly reset the TRB counter from correct control endpoint. Cc: stable@vger.kernel.org Fixes: c2da2ff00606 ("usb: dwc3: ep0: don't use ep0in for transfers") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: gadget: Set maxpacket size for ep0 INThinh Nguyen2018-02-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | commit 6180026341e852a250e1f97ebdcf71684a3c81b9 upstream. There are 2 control endpoint structures for DWC3. However, the driver only updates the OUT direction control endpoint structure during ConnectDone event. DWC3 driver needs to update the endpoint max packet size for control IN endpoint as well. If the max packet size is not properly set, then the driver will incorrectly calculate the data transfer size and fail to send ZLP for HS/FS 3-stage control read transfer. The fix is simply to update the max packet size for the ep0 IN direction during ConnectDone event. Cc: stable@vger.kernel.org Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: ehci: use correct device pointer for dma opsPeter Chen2018-02-281-2/+2
| | | | | | | | | | | | | | | | commit 02a10f061a3f8bca1b37332672f50a107198adbe upstream. commit a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller, but forgot to do it for hcd test mode. Replace the correct one in this commit. Fixes: a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Add delay-init quirk for Corsair K70 RGB keyboardsJack Stocker2018-02-281-0/+3
| | | | | | | | | | | | | | | | | | commit 7a1646d922577b5b48c0d222e03831141664bb59 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by: Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ohci: Proper handling of ed_rm_list to handle race condition between ↵AMAN DEEP2018-02-281-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_kill_urb() and finish_unlinks() commit 46408ea558df13b110e0866b99624384a33bdeba upstream. There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Aman Deep <aman.deep@samsung.com> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()Shigeru Yoshida2018-02-282-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b2685bdacdaab065c172b97b55ab46c6be77a037 upstream. Running io_watchdog_func() while ohci_urb_enqueue() is running can cause a race condition where ohci->prev_frame_no is corrupted and the watchdog can mis-detect following error: ohci-platform 664a0800.usb: frame counter not updating; disabled ohci-platform 664a0800.usb: HC died; cleaning up Specifically, following scenario causes a race condition: 1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number read by ohci_frame_no(ohci) 4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section 6. Later, ohci_urb_enqueue() is called 7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 8. The timer scheduled on step 4 expires and io_watchdog_func() runs 9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags) and waits on it because ohci_urb_enqueue() is already in the critical section on step 7 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number read by ohci_frame_no(ohci) because the frame number proceeded between step 3 and 6 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section, then wake up io_watchdog_func() which is waiting on step 9 14. io_watchdog_func() enters the critical section 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no variable to the frame number 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no On step 16, because this calling of io_watchdog_func() is scheduled on step 4, the frame number set in ohci->prev_frame_no is expected to the number set on step 3. However, ohci->prev_frame_no is overwritten on step 11. Because step 16 is executed soon after step 11, the frame number might not proceed, so ohci->prev_frame_no must equals to frame_no. To address above scenario, this patch introduces a special sentinel value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when the watchdog is not pending or running. When ohci_urb_enqueue() schedules the watchdog (step 4 and 12 above), it compares ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is not overwritten while io_watchdog_func() is running. Signed-off-by: Shigeru Yoshida <Shigeru.Yoshida@windriver.com> Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: of-simple: fix missing clk_disable_unprepareAndreas Platschek2018-02-251-1/+3
| | | | | | | | | | | | | | | | | [ Upstream commit ded600ea9fb51a495d2fcd21e90351df876488e8 ] If of_clk_get() fails, the clean-up of already initialized clocks should be the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare() for each clock should be called before the clk_put(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 16adc674d0d6 ("usb: dwc3: ep0: fix setup_packet_pending initialization") Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: gadget: Wait longer for controller to end command processingVincent Pelletier2018-02-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8722e095f5a44d0e409e45c5ddc2ee9cf589c777 ] DWC3_DEPCMD_ENDTRANSFER has been witnessed to require around 600 iterations before controller would become idle again after unplugging the USB cable with AIO reads submitted. Bump timeout from 500 iterations to 1000 so dwc3_stop_active_transfer does not receive -ETIMEDOUT and does not WARN: [ 81.326273] ------------[ cut here ]------------ [ 81.335341] WARNING: CPU: 0 PID: 1874 at drivers/usb/dwc3/gadget.c:2627 dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3] [ 81.347094] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil dwc3 intel_powerclamp coretemp ulpi kvm_intel udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd basincove_gpadc industrialio gpio_keys usbcore usb_common [ 81.378142] CPU: 0 PID: 1874 Comm: irq/34-dwc3 Not tainted 4.14.0-edison+ #119 [ 81.385545] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 81.394548] task: f5b1be00 task.stack: f420a000 [ 81.399219] EIP: dwc3_stop_active_transfer.constprop.23+0x69/0xc0 [dwc3] [ 81.406086] EFLAGS: 00010086 CPU: 0 [ 81.409672] EAX: 0000001f EBX: f5729800 ECX: c132a2a2 EDX: 00000000 [ 81.416096] ESI: f4054014 EDI: f41cf400 EBP: f420be10 ESP: f420bdf4 [ 81.422521] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 81.428061] CR0: 80050033 CR2: b7a3f000 CR3: 01d94000 CR4: 001006d0 [ 81.434483] Call Trace: [ 81.437063] __dwc3_gadget_ep_disable+0xa3/0x2b0 [dwc3] [ 81.442438] ? _raw_spin_lock_irqsave+0x32/0x40 [ 81.447135] dwc3_gadget_ep_disable+0xbf/0xe0 [dwc3] [ 81.452269] usb_ep_disable+0x1c/0xd0 [udc_core] [ 81.457048] ffs_func_eps_disable.isra.15+0x3b/0x90 [usb_f_fs] [ 81.463070] ffs_func_set_alt+0x7d/0x310 [usb_f_fs] [ 81.468132] ffs_func_disable+0x14/0x20 [usb_f_fs] [ 81.473075] reset_config+0x5b/0x90 [libcomposite] [ 81.478023] composite_disconnect+0x2b/0x50 [libcomposite] [ 81.483685] dwc3_disconnect_gadget+0x39/0x50 [dwc3] [ 81.488808] dwc3_gadget_disconnect_interrupt+0x21b/0x250 [dwc3] [ 81.495014] dwc3_thread_interrupt+0x2a8/0xf70 [dwc3] [ 81.500219] ? __schedule+0x78c/0x7e0 [ 81.504027] irq_thread_fn+0x18/0x30 [ 81.507715] ? irq_thread+0xb7/0x180 [ 81.511400] irq_thread+0x111/0x180 [ 81.515000] ? irq_finalize_oneshot+0xe0/0xe0 [ 81.519490] ? wake_threads_waitq+0x30/0x30 [ 81.523806] kthread+0x107/0x110 [ 81.527131] ? disable_percpu_irq+0x50/0x50 [ 81.531439] ? kthread_stop+0x150/0x150 [ 81.535397] ret_from_fork+0x19/0x24 [ 81.539136] Code: 89 d8 c7 45 ec 00 00 00 00 c7 45 f0 00 00 00 00 c7 45 f4 00 00 00 00 e8 56 ef ff ff 85 c0 74 12 50 68 b9 1c 14 f8 e8 64 0f f7 c8 <0f> ff 58 5a 8d 76 00 8b 83 98 00 00 00 c6 83 a0 00 00 00 00 83 [ 81.559295] ---[ end trace f3133eec81a473b8 ]--- Number of iterations measured on 4 consecutive unplugs: [ 1088.799777] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 605 times [ 1222.024986] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 580 times [ 1317.590452] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 598 times [ 1453.218314] dwc3_send_gadget_ep_cmd(cmd=331016, params={0, 0, 0}) iterated 594 times Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: keep usbip_device sockfd state in sync with tcp_socketShuah Khan2018-02-252-0/+5
| | | | | | | | | | | | commit 009f41aed4b3e11e6dc1e3c07377a10c20f1a5ed upstream. Keep usbip_device sockfd state in sync with tcp_socket. When tcp_socket is reset to null, reset sockfd to -1 to keep it in sync. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: Add a helper function to check the validity of EP type in URBTakashi Iwai2018-02-251-4/+26
| | | | | | | | | | | | | | | | | | | | commit e901b9873876ca30a09253731bd3a6b00c44b5b0 upstream. This patch adds a new helper function to perform a sanity check of the given URB to see whether it contains a valid endpoint. It's a light- weight version of what usb_submit_urb() does, but without the kernel warning followed by the stack trace, just returns an error code. Especially for a driver that doesn't parse the descriptor but fills the URB with the fixed endpoint (e.g. some quirks for non-compliant devices), this kind of check is preferable at the probe phase before actually submitting the urb. Tested-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORTJames Hogan2018-02-222-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ec897569ad7dbc6d595873a487c3fac23f463f76 upstream. Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is conditional upon USB && USB_SUPPORT, so that it can be freely selected by platform Kconfig symbols in architecture code. For example once the MIPS_GENERIC platform selects are fixed in commit 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS 32r6_defconfig warns like so: warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB) Fixes: 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN") Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-usb@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Patchwork: https://patchwork.linux-mips.org/patch/18559/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()Benjamin Herrenschmidt2018-02-031-1/+1
| | | | | | | | | | | | commit 11fb37998759c48e4e4c200c974593cbeab25d3e upstream. The current code tries to test for bits that are masked out by usb_endpoint_maxp(). Instead, use the proper accessor to access the new high bandwidth bits. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: uas: unconditionally bring back host after resetOliver Neukum2018-02-031-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: f_fs: Prevent gadget unbind if it is already unboundHemant Kumar2018-02-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg KH <gregkh@linux-foundation.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Badhri <badhri@google.com> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: simple: add Motorola Tetra driverJohan Hovold2018-02-032-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream. Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI devices. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Note that these devices do not support the CDC SET_CONTROL_LINE_STATE request (for any interface). Reported-by: Max Schulze <max.schulze@posteo.de> Tested-by: Max Schulze <max.schulze@posteo.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: io_edgeport: fix possible sleep-in-atomicJia-Ju Bai2018-02-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream. According to drivers/usb/serial/io_edgeport.c, the driver may sleep under a spinlock. The function call path is: edge_bulk_in_callback (acquire the spinlock) process_rcvd_data process_rcvd_status change_port_settings send_iosp_ext_cmd write_cmd_usb usb_kill_urb --> may sleep To fix it, the redundant usb_kill_urb() is removed from the error path after usb_submit_urb() fails. This possible bug is found by my static analysis tool (DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* CDC-ACM: apply quirk for card readerOliver Neukum2018-02-031-0/+3
| | | | | | | | | | | commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: Do not log urb submission errors on disconnectHans de Goede2018-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: pl2303: new device id for ChilitagGreg Kroah-Hartman2018-02-032-0/+2
| | | | | | | | | | | commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by: "Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: option: Add support for FS040U modemOKAMOTO Yoshiaki2018-02-031-0/+5
| | | | | | | | | | | | | | commit 69341bd15018da0a662847e210f9b2380c71e623 upstream. FS040U modem is manufactured by omega, and sold by Fujisoft. This patch adds ID of the modem to use option1 driver. Interface 3 is used as qmi_wwan, so the interface is ignored. Signed-off-by: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp> Signed-off-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: don't dereference g until after it has been null checkedColin Ian King2018-02-031-2/+5
| | | | | | | | | | | | | | | | [ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ] Avoid dereferencing pointer g until after g has been sanity null checked; move the assignment of cdev much later when it is required into a more local scope. Detected by CoverityScan, CID#1222135 ("Dereference before null check") Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uas: ignore UAS for Norelsys NS1068(X) chipsIcenowy Zheng2018-01-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | commit 928afc85270753657b5543e052cc270c279a3fe9 upstream. The UAS mode of Norelsys NS1068(X) is reported to fail to work on several platforms with the following error message: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8 xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001 And when trying to mount a partition on the disk the disk will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer bufferShuah Khan2018-01-171-2/+9
| | | | | | | | | | | | | | | commit 5fd77a3a0e408c23ab4002a57db980e46bc16e72 upstream. v_send_ret_submit() handles urb with a null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious inputShuah Khan2018-01-171-0/+19
| | | | | | | | | | | | | commit b78d830f0049ef1966dc1e0ebd1ec2a594e2cf25 upstream. Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbip: remove kernel addresses from usb device and urb debug msgsShuah Khan2018-01-171-14/+3
| | | | | | | | | | | | | | | commit e1346fd87c71a1f61de1fe476ec8df1425ac931c upstream. usbip_dump_usb_device() and usbip_dump_urb() print kernel addresses. Remove kernel addresses from usb device and urb debug msgs and improve the message content. Instead of printing parent device and bus addresses, print parent device and bus names. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: UDC core: fix double-free in usb_add_gadget_udc_releaseAlan Stern2018-01-171-15/+13
| | | | | | | | | | | | | | | | | | | commit 7ae2c3c280db183ca9ada2675c34ec2f7378abfa upstream. The error-handling pathways in usb_add_gadget_udc_release() are messed up. Aside from the uninformative statement labels, they can deallocate the udc structure after calling put_device(), which is a double-free. This was observed by KASAN in automatic testing. This patch cleans up the routine. It preserves the requirement that when any failure occurs, we call put_device(&gadget->dev). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 19:50:02 +0000