summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
...
* staging: iio: adt7316: invert the logic of the check for an ldac pinJeremy Fertic2019-07-091-1/+1
| | | | | | | | | | | | | | | | | | commit 85a1c11913312132d0800ca2c1c42a011f96ea92 upstream. ADT7316_DA_EN_VIA_DAC_LDCA is set when the dac and ldac registers are being used to update the dacs instead of the ldac pin. ADT7516_SEL_AIN3 is an adc input that shares the ldac pin. Only set these bits if an ldac pin is not being used. This could be backported to stable, but note there are various other bugs that probably make that a waste of time. Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com> Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* staging: iio: adt7316: fix register and bit definitionsJeremy Fertic2019-07-091-3/+3
| | | | | | | | | | | | | | | commit 53a6f022b4fe8645468adaffca901dbf8c3c547e upstream. Change two register addresses and one bit definition to match the datasheet. Note that there are many issues in this driver so I would not suggest backporting these fixes to stable trees. Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com> Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* scsi: megaraid_sas: return error when create DMA pool failedJason Yan2019-06-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit bcf3b67d16a4c8ffae0aa79de5853435e683945c upstream. when create DMA pool for cmd frames failed, we should return -ENOMEM, instead of 0. In some case in: megasas_init_adapter_fusion() -->megasas_alloc_cmds() -->megasas_create_frame_pool create DMA pool failed, --> megasas_free_cmds() [1] -->megasas_alloc_cmds_fusion() failed, then goto fail_alloc_cmds. -->megasas_free_cmds() [2] we will call megasas_free_cmds twice, [1] will kfree cmd_list, [2] will use cmd_list.it will cause a problem: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc000f70000 [00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003, *pmd=0000001fbf894003, *pte=006000006d000707 Internal error: Oops: 96000005 [#1] SMP Modules linked in: CPU: 18 PID: 1 Comm: swapper/0 Not tainted task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000 PC is at megasas_free_cmds+0x30/0x70 LR is at megasas_free_cmds+0x24/0x70 ... Call trace: [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8 [<ffffffc000539e88>] driver_attach+0x28/0x34 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248 [<ffffffc00053b234>] driver_register+0x6c/0x138 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4 Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctlDan Carpenter2019-06-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | commit 6a024330650e24556b8a18cc654ad00cfecf6c6c upstream. The "param.count" value is a u64 thatcomes from the user. The code later in the function assumes that param.count is at least one and if it's not then it leads to an Oops when we dereference the ZERO_SIZE_PTR. Also the addition can have an integer overflow which would lead us to allocate a smaller "pages" array than required. I can't immediately tell what the possible run times implications are, but it's safest to prevent the overflow. Link: http://lkml.kernel.org/r/20181218082129.GE32567@kadam Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Timur Tabi <timur@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* x86/speculation/mds: Add sysfs reporting for MDSThomas Gleixner2019-05-221-0/+8
| | | | | | | | | | | | | | | | | | commit 8a4b06d391b0a42a373808979b5028f5c84d9c6a upstream. Add the sysfs reporting file for MDS. It exposes the vulnerability and mitigation state similar to the existing files for the other speculative hardware vulnerabilities. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Jon Masters <jcm@redhat.com> Tested-by: Jon Masters <jcm@redhat.com> [bwh: Backported to 3.16: - Test x86_hyper instead of using hypervisor_is_type() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* vxlan: Fix big-endian declaration of VNIBen Hutchings2019-05-111-1/+1
| | | | | | | | | | | In this version of the driver, VNIs are consistently kept in host order. However vxlan_fdb_create() erroneously declares its vni parameter as __be32, which sparse warns about. Change it to __u32. This was resolved upstream by commit 54bfd872bf16 "vxlan: keep flags and vni in network byte order". Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* spi: omap-100k: Remove unused definitionsNick Krause2019-05-111-4/+0
| | | | | | | | | | | | | | | | commit 9f5b8b4f56dd194fd33021810636879036d2acdd upstream. Remove unused definition which cause the following warnings drivers/spi/spi-omap-100k.c:73:0: warning: "WRITE" redefined [enabled by default] include/linux/fs.h:193:0: note: this is the location of the previous definition drivers/spi/spi-omap-100k.c:74:0: warning: "READ" redefined [enabled by default] include/linux/fs.h:192:0: note: this is the location of the previous definition Signed-off-by: Nick Krause <xerofoiffy@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: add length checks in scheduled scan result handlerArend Van Spriel2019-05-111-3/+11
| | | | | | | | | | | | | | | | | | | commit 4835f37e3bafc138f8bfa3cbed2920dd56fed283 upstream. Assure the event data buffer is long enough to hold the array of netinfo items and that SSID length does not exceed the maximum of 32 characters as per 802.11 spec. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: - Move the assignment to "data" along with the assignment to "netinfo_start" that depends on it - Adjust filename, context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Revert "brcmfmac: assure SSID length from firmware is limited"Ben Hutchings2019-05-111-2/+0
| | | | | | | | | This reverts commit 9657f3abd17772d3290a3545dfb4811d945e84e1, which was similar to commit 1b5e2423164b3670e8bc9174e4762d297990deff upstream. The function fixed upstream doesn't exist in 3.16 and the similar bug that does exist here needs a different fix. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* tty: mark Siemens R3964 line discipline as BROKENGreg Kroah-Hartman2019-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit c7084edc3f6d67750f50d4183134c4fb5712a5c8 upstream. The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: add subtype check for event handling in data pathArend van Spriel2019-05-022-6/+15
| | | | | | | | | | | | | | | | | | | | commit a4176ec356c73a46c07c181c6d04039fafa34a9f upstream. For USB there is no separate channel being used to pass events from firmware to the host driver and as such are passed over the data path. In order to detect mock event messages an additional check is needed on event subtype. This check is added conditionally using unlikely() keyword. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: - Drop changes to PCIe bus support - Adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: revise handling events in receive pathArend van Spriel2019-05-022-17/+17
| | | | | | | | | | | | | | | | | | | commit 9c349892ccc90c6de2baaa69cc78449f58082273 upstream. Move event handling out of brcmf_netif_rx() avoiding the need to pass a flag. This flag is only ever true for USB hosts as other interface use separate brcmf_rx_event() function. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16 as dependency of commit a4176ec356c7 "brcmfmac: add subtype check for event handling in data path" - Drop changes to PCIe bus support - Adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: fix incorrect event channel deductionGavin Li2019-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | commit 8e290cecdd0178f3d4cf7d463c51dc7e462843b4 upstream. brcmf_sdio_fromevntchan() was being called on the the data frame rather than the software header, causing some frames to be mischaracterized as on the event channel rather than the data channel. This fixes a major performance regression (due to dropped packets). With this patch the download speed jumped from 1Mbit/s back up to 40MBit/s due to the sheer amount of packets being incorrectly processed. Fixes: c56caa9db8ab ("brcmfmac: screening firmware event packet") Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [kvalo@codeaurora.org: improve commit logs based on email discussion] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: screening firmware event packetFranky Lin2019-05-024-20/+64
| | | | | | | | | | | | | | | | | | | | commit c56caa9db8abbbfb9e31325e0897705aa897db37 upstream. Firmware uses asynchronized events as a communication method to the host. The event packets are marked as ETH_P_LINK_CTL protocol type. For SDIO and PCIe bus, this kind of packets are delivered through virtual event channel not data channel. This patch adds a screening logic to make sure the event handler only processes the events coming from the correct channel. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: - Drop changes to PCIe bus support - Adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: make brcmf_proto_hdrpull() return struct brcmf_if instanceArend van Spriel2019-05-024-26/+35
| | | | | | | | | | | | | | | | | commit 796cfb65e3ed01a9b08e3a0b93e34120c54bbbd2 upstream. Avoid spreading the ifidx in the driver, but have it return the struct brcmf_if instance. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: - Drop changes to PCIe bus support - Adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: consolidate ifp lookup in driver coreArend van Spriel2019-05-023-16/+30
| | | | | | | | | | | | | | | | | | | commit 75effb03ee8e4c9d4bbc909118ce5444b047dfde upstream. In rx path the firmware provide an interface index which is used to map to a struct brcmf_if instance. However, this involves some trick that is done in two places. This is changed by having driver core providing brcmf_get_ifp() function. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: - Drop changes to PCIe bus support - Adjust filenames] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmfmac: assure SSID length from firmware is limitedArend van Spriel2019-05-021-0/+2
| | | | | | | | | | | | | | | commit 1b5e2423164b3670e8bc9174e4762d297990deff upstream. The SSID length as received from firmware should not exceed IEEE80211_MAX_SSID_LEN as that would result in heap overflow. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* vfio/type1: Limit DMA mappings per containerAlex Williamson2019-05-021-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 492855939bdb59c6f947b0b5b44af9ad82b7e38c upstream. Memory backed DMA mappings are accounted against a user's locked memory limit, including multiple mappings of the same memory. This accounting bounds the number of such mappings that a user can create. However, DMA mappings that are not backed by memory, such as DMA mappings of device MMIO via mmaps, do not make use of page pinning and therefore do not count against the user's locked memory limit. These mappings still consume memory, but the memory is not well associated to the process for the purpose of oom killing a task. To add bounding on this use case, we introduce a limit to the total number of concurrent DMA mappings that a user is allowed to create. This limit is exposed as a tunable module option where the default value of 64K is expected to be well in excess of any reasonable use case (a large virtual machine configuration would typically only make use of tens of concurrent mappings). This fixes CVE-2019-3882. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> [bwh: Backported to 3.16: - Add the out_unlock label in vfio_dma_do_map() - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* media: em28xx: Fix use-after-free when disconnectingMatthias Schwarzott2019-05-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 910b0797fa9e8af09c44a3fa36cb310ba7a7218d upstream. Fix bug by moving the i2c_unregister_device calls after deregistration of dvb frontend. The new style i2c drivers already destroys the frontend object at i2c_unregister_device time. When the dvb frontend is unregistered afterwards it leads to this oops: [ 6058.866459] BUG: unable to handle kernel NULL pointer dereference at 00000000000001f8 [ 6058.866578] IP: dvb_frontend_stop+0x30/0xd0 [dvb_core] [ 6058.866644] PGD 0 [ 6058.866646] P4D 0 [ 6058.866726] Oops: 0000 [#1] SMP [ 6058.866768] Modules linked in: rc_pinnacle_pctv_hd(O) em28xx_rc(O) si2157(O) si2168(O) em28xx_dvb(O) em28xx(O) si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) videobuf2_core(O) videodev(O) media(O) bluetooth ecdh_generic ums_realtek uas rtl8192cu rtl_usb rtl8192c_common rtlwifi usb_storage snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic i2c_mux snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core kvm_intel kvm irqbypass [last unloaded: videobuf2_memops] [ 6058.867497] CPU: 2 PID: 7349 Comm: kworker/2:0 Tainted: G W O 4.13.9-gentoo #1 [ 6058.867595] Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014 [ 6058.867692] Workqueue: usb_hub_wq hub_event [ 6058.867746] task: ffff88011a15e040 task.stack: ffffc90003074000 [ 6058.867825] RIP: 0010:dvb_frontend_stop+0x30/0xd0 [dvb_core] [ 6058.867896] RSP: 0018:ffffc90003077b58 EFLAGS: 00010293 [ 6058.867964] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000010040001f [ 6058.868056] RDX: ffff88011a15e040 RSI: ffffea000464e400 RDI: ffff88001cbe3028 [ 6058.868150] RBP: ffffc90003077b68 R08: ffff880119390380 R09: 000000010040001f [ 6058.868241] R10: ffffc90003077b18 R11: 000000000001e200 R12: ffff88001cbe3028 [ 6058.868330] R13: ffff88001cbe68d0 R14: ffff8800cf734000 R15: ffff8800cf734098 [ 6058.868419] FS: 0000000000000000(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000 [ 6058.868511] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6058.868578] CR2: 00000000000001f8 CR3: 00000001113c5000 CR4: 00000000001406e0 [ 6058.868662] Call Trace: [ 6058.868705] dvb_unregister_frontend+0x2a/0x80 [dvb_core] [ 6058.868774] em28xx_dvb_fini+0x132/0x220 [em28xx_dvb] [ 6058.868840] em28xx_close_extension+0x34/0x90 [em28xx] [ 6058.868902] em28xx_usb_disconnect+0x4e/0x70 [em28xx] [ 6058.868968] usb_unbind_interface+0x6d/0x260 [ 6058.869025] device_release_driver_internal+0x150/0x210 [ 6058.869094] device_release_driver+0xd/0x10 [ 6058.869150] bus_remove_device+0xe4/0x160 [ 6058.869204] device_del+0x1ce/0x2f0 [ 6058.869253] usb_disable_device+0x99/0x270 [ 6058.869306] usb_disconnect+0x8d/0x260 [ 6058.869359] hub_event+0x93d/0x1520 [ 6058.869408] ? dequeue_task_fair+0xae5/0xd20 [ 6058.869467] process_one_work+0x1d9/0x3e0 [ 6058.869522] worker_thread+0x43/0x3e0 [ 6058.869576] kthread+0x104/0x140 [ 6058.869602] ? trace_event_raw_event_workqueue_work+0x80/0x80 [ 6058.869640] ? kthread_create_on_node+0x40/0x40 [ 6058.869673] ret_from_fork+0x22/0x30 [ 6058.869698] Code: 54 49 89 fc 53 48 8b 9f 18 03 00 00 0f 1f 44 00 00 41 83 bc 24 04 05 00 00 02 74 0c 41 c7 84 24 04 05 00 00 01 00 00 00 0f ae f0 <48> 8b bb f8 01 00 00 48 85 ff 74 5c e8 df 40 f0 e0 48 8b 93 f8 [ 6058.869850] RIP: dvb_frontend_stop+0x30/0xd0 [dvb_core] RSP: ffffc90003077b58 [ 6058.869894] CR2: 00000000000001f8 [ 6058.875880] ---[ end trace 717eecf7193b3fc6 ]--- Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* media: em28xx-dvb - fix em28xx_dvb_resume() to not unregister i2c and dvbShuah Khan2019-05-021-17/+0
| | | | | | | | | | | | | | commit 6eb5e3399e8f45aa191ad21c0556bece8ea559f2 upstream. em28xx_dvb_resume() unregisters i2c tuner, i2c demod, and dvb. This erroneous cleanup results in i2c tuner, i2c demod, and dvb devices unregistered and removed during resume. This error is a result of merge conflict between two patches that went into 3.15. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: phy: Micrel KSZ8061: link failure after cable connectRajasingh Thavamani2019-05-021-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 232ba3a51cc224b339c7114888ed7f0d4d95695e upstream. With Micrel KSZ8061 PHY, the link may occasionally not come up after Ethernet cable connect. The vendor's (Microchip, former Micrel) errata sheet 80000688A.pdf descripes the problem and possible workarounds in detail, see below. The batch implements workaround 1, which permanently fixes the issue. DESCRIPTION Link-up may not occur properly when the Ethernet cable is initially connected. This issue occurs more commonly when the cable is connected slowly, but it may occur any time a cable is connected. This issue occurs in the auto-negotiation circuit, and will not occur if auto-negotiation is disabled (which requires that the two link partners be set to the same speed and duplex). END USER IMPLICATIONS When this issue occurs, link is not established. Subsequent cable plug/unplaug cycle will not correct the issue. WORk AROUND There are four approaches to work around this issue: 1. This issue can be prevented by setting bit 15 in MMD device address 1, register 2, prior to connecting the cable or prior to setting the Restart Auto-negotiation bit in register 0h. The MMD registers are accessed via the indirect access registers Dh and Eh, or via the Micrel EthUtil utility as shown here: . if using the EthUtil utility (usually with a Micrel KSZ8061 Evaluation Board), type the following commands: > address 1 > mmd 1 > iw 2 b61a . Alternatively, write the following registers to write to the indirect MMD register: Write register Dh, data 0001h Write register Eh, data 0002h Write register Dh, data 4001h Write register Eh, data B61Ah 2. The issue can be avoided by disabling auto-negotiation in the KSZ8061, either by the strapping option, or by clearing bit 12 in register 0h. Care must be taken to ensure that the KSZ8061 and the link partner will link with the same speed and duplex. Note that the KSZ8061 defaults to full-duplex when auto-negotiation is off, but other devices may default to half-duplex in the event of failed auto-negotiation. 3. The issue can be avoided by connecting the cable prior to powering-up or resetting the KSZ8061, and leaving it plugged in thereafter. 4. If the above measures are not taken and the problem occurs, link can be recovered by setting the Restart Auto-Negotiation bit in register 0h, or by resetting or power cycling the device. Reset may be either hardware reset or software reset (register 0h, bit 15). PLAN This errata will not be corrected in the future revision. Fixes: 7ab59dc15e2f ("drivers/net/phy/micrel_phy: Add support for new PHYs") Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com> Signed-off-by: Rajasingh Thavamani <T.Rajasingh@landisgyr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: - Include <linux/mdio.h> for register definition - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mmc: tmio_mmc_core: don't claim spurious interruptsSergei Shtylyov2019-05-021-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | commit 5c27ff5db1491a947264d6d4e4cbe43ae6535bae upstream. I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a232a9 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [bwh: Backported to 3.16: - tmio_mmc_sdio_irq() can be used directly as an interrupt handler, so make it return IRQ_NONE for unhandled interrupts - Adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mmc: spi: Fix card detection during probeJonathan Neuschäfer2019-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream. When using the mmc_spi driver with a card-detect pin, I noticed that the card was not detected immediately after probe, but only after it was unplugged and plugged back in (and the CD IRQ fired). The call tree looks something like this: mmc_spi_probe mmc_add_host mmc_start_host _mmc_detect_change mmc_schedule_delayed_work(&host->detect, 0) mmc_rescan host->bus_ops->detect(host) mmc_detect _mmc_detect_card_removed host->ops->get_cd(host) mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set) mmc_gpiod_request_cd ctx->cd_gpio = desc To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ is registered. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mdio_bus: Fix use-after-free on device_register failsYueHaibing2019-05-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6ff7b060535e87c2ae14dd8548512abfdda528fb upstream. KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* net: stmmac: Fix a race in EEE enable callbackJose Abreu2019-05-021-10/+12
| | | | | | | | | | | | | | | | | | | | | commit 8a7493e58ad688eb23b81e45461c5d314f4402f1 upstream. We are saving the status of EEE even before we try to enable it. This leads to a race with XMIT function that tries to arm EEE timer before we set it up. Fix this by only saving the EEE parameters after all operations are performed with success. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support") Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attachedJohn Garry2019-05-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ffeafdd2bf0b280d67ec1a47ea6287910d271f3f upstream. The sysfs phy_identifier attribute for a sas_end_device comes from the rphy phy_identifier value. Currently this is not being set for rphys with an end device attached, so we see incorrect symlinks from systemd disk/by-path: root@localhost:~# ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0 -> ../../sdb lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part2 -> ../../sdb2 lrwxrwxrwx 1 root root 10 Feb 13 12:26 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy0-lun-0-part3 -> ../../sdc3 Indeed, each sas_end_device phy_identifier value is 0: root@localhost:/# more sys/class/sas_device/end_device-0\:0\:2/phy_identifier 0 root@localhost:/# more sys/class/sas_device/end_device-0\:0\:10/phy_identifier 0 This patch fixes the discovery code to set the phy_identifier. With this, we now get proper symlinks: root@localhost:~# ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy10-lun-0 -> ../../sdg lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy11-lun-0 -> ../../sdh lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0 -> ../../sda lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy2-lun-0-part1 -> ../../sda1 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0 -> ../../sdb lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy3-lun-0-part2 -> ../../sdb2 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0 -> ../../sdc lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part2 -> ../../sdc2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy4-lun-0-part3 -> ../../sdc3 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy5-lun-0 -> ../../sdd lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0 -> ../../sde lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part1 -> ../../sde1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part2 -> ../../sde2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy7-lun-0-part3 -> ../../sde3 lrwxrwxrwx 1 root root 9 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0 -> ../../sdf lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part2 -> ../../sdf2 lrwxrwxrwx 1 root root 10 Feb 13 11:53 platform-HISI0162:01-sas-exp0x500e004aaaaaaa1f-phy8-lun-0-part3 -> ../../sdf3 Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Reported-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* i2c: cadence: Fix the hold bit settingShubhrajyoti Datta2019-05-021-2/+7
| | | | | | | | | | | | | | | | | | commit d358def706880defa4c9e87381c5bf086a97d5f9 upstream. In case the hold bit is not needed we are carrying the old values. Fix the same by resetting the bit when not needed. Fixes the sporadic i2c bus lockups on National Instruments Zynq-based devices. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Reported-by: Kyle Roeschley <kyle.roeschley@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Tested-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* dm thin: fix bug where bio that overwrites thin block ignores FUANikos Tsironis2019-05-021-5/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4ae280b4ee3463fa57bbe6eede26b97daff8a0f1 upstream. When provisioning a new data block for a virtual block, either because the block was previously unallocated or because we are breaking sharing, if the whole block of data is being overwritten the bio that triggered the provisioning is issued immediately, skipping copying or zeroing of the data block. When this bio completes the new mapping is inserted in to the pool's metadata by process_prepared_mapping(), where the bio completion is signaled to the upper layers. This completion is signaled without first committing the metadata. If the bio in question has the REQ_FUA flag set and the system crashes right after its completion and before the next metadata commit, then the write is lost despite the REQ_FUA flag requiring that I/O completion for this request must only be signaled after the data has been committed to non-volatile storage. Fix this by deferring the completion of overwrite bios, with the REQ_FUA flag set, until after the metadata has been committed. Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Acked-by: Joe Thornber <ejt@redhat.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> [bwh: Backported to 3.16: - bio_endio() takes an error parameter - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* team: avoid complex list operations in team_nl_cmd_options_set()Cong Wang2019-05-021-22/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2fdeee2549231b1f989f011bb18191f5660d3745 upstream. The current opt_inst_list operations inside team_nl_cmd_options_set() is too complex to track: LIST_HEAD(opt_inst_list); nla_for_each_nested(...) { list_for_each_entry(opt_inst, &team->option_inst_list, list) { if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst)) continue; list_add(&opt_inst->tmp_list, &opt_inst_list); } } team_nl_send_event_options_get(team, &opt_inst_list); as while we retrieve 'opt_inst' from team->option_inst_list, it could be added to the local 'opt_inst_list' for multiple times. The __team_option_inst_tmp_find() doesn't work, as the setter team_mode_option_set() still calls team->ops.exit() which uses ->tmp_list too in __team_options_change_check(). Simplify the list operations by moving the 'opt_inst_list' and team_nl_send_event_options_get() into the nla_for_each_nested() loop so that it can be guranteed that we won't insert a same list entry for multiple times. Therefore, __team_option_inst_tmp_find() can be removed too. Fixes: 4fb0534fb7bb ("team: avoid adding twice the same option to the event list") Fixes: 2fcdb2c9e659 ("team: allow to send multiple set events in one message") Reported-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com Reported-by: syzbot+68ee510075cf64260cc4@syzkaller.appspotmail.com Cc: Jiri Pirko <jiri@resnulli.us> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* vxlan: test dev->flags & IFF_UP before calling netif_rx()Eric Dumazet2019-05-021-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4179cb5a4c924cd233eaadd081882425bc98f44e upstream. netif_rx() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Note this patch also fixes a small issue that came with commit ce6502a8f957 ("vxlan: fix a use after free in vxlan_encap_bypass"), since the dev->stats.rx_dropped change was done on the wrong device. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Fixes: ce6502a8f957 ("vxlan: fix a use after free in vxlan_encap_bypass") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Petr Machata <petrm@mellanox.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780Matti Kurkela2019-05-021-0/+9
| | | | | | | | | | | | | | | | | commit e8b22d0a329f0fb5c7ef95406872d268f01ee3b1 upstream. Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Input: elantech - force needed quirks on Fujitsu H760Matti Kurkela2019-05-021-0/+14
| | | | | | | | | | | | | | | commit f9a703a54d16ba2470391c4b12236ee56591d50c upstream. Just like Fujitsu CELSIUS H730, the H760 also has an Elantech touchpad with the same quirks. Without this patch, the touchpad is useless out-of-the-box as the mouse pointer won't move. This patch makes the driver aware of both the crc_enabled=1 requirement and the middle button, making the touchpad fully functional out-of-the-box. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSDHans de Goede2019-05-021-0/+1
| | | | | | | | | | | | | | | | | commit dd957493baa586f1431490f97f9c7c45eaf8ab10 upstream. We've received a bugreport that using LPM with a SAMSUNG MZ7TE512HMHP-000L1 SSD leads to system instability, we already have a quirk for the MZ7TD256HAFV-000L9, which is also a Samsun EVO 840 / PM851 OEM model, so it seems some of these models have a LPM issue. This commits adds a NOLPM quirk for the model string from the new bugeport, to avoid the reported stability issues. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Input: bma150 - register input device after setting private dataJonathan Bakker2019-05-021-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 90cc55f067f6ca0e64e5e52883ece47d8af7b67b upstream. Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mtd: rawnand: gpmi: fix MX28 bus master lockup problemMartin Kepplinger2019-05-021-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d5d27fd9826b59979b184ec288e4812abac0e988 upstream. Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft reset may cause bus master lock up") for MX28 too. It has the same problem. Observed problem: once per 100,000+ MX28 reboots NAND read failed on DMA timeout errors: [ 1.770823] UBI: attaching mtd3 to ubi0 [ 2.768088] gpmi_nand: DMA timeout, last DMA :1 [ 3.958087] gpmi_nand: BCH timeout, last DMA :1 [ 4.156033] gpmi_nand: Error in ECC-based read: -110 [ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64 bytes from PEB 0:0, read only 0 bytes, retry [ 4.171283] step 1 error [ 4.173846] gpmi_nand: Chip: 0, Error -1 Without BCH soft reset we successfully executed 1,000,000 MX28 reboots. I have a quote from NXP regarding this problem, from July 18th 2016: "As the i.MX23 and i.MX28 are of the same generation, they share many characteristics. Unfortunately, also the erratas may be shared. In case of the documented erratas and the workarounds, you can also apply the workaround solution of one device on the other one. This have been reported, but I’m afraid that there are not an estimated date for updating the Errata documents. Please accept our apologies for any inconveniences this may cause." Fixes: 6f2a6a52560a ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems") Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* drm/vmwgfx: Fix setting of dma masksThomas Hellstrom2019-05-021-3/+6
| | | | | | | | | | | | commit 4cbfa1e6c09e98450aab3240e5119b0ab2c9795b upstream. Previously we set only the dma mask and not the coherent mask. Fix that. Also, for clarity, make sure both are initially set to 64 bits. Fixes: 0d00c488f3de: ("drm/vmwgfx: Fix the driver for large dma addresses") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_userThomas Hellstrom2019-05-021-1/+1
| | | | | | | | | | | | | | | | | commit 728354c005c36eaf44b6e5552372b67e60d17f56 upstream. The function was unconditionally returning 0, and a caller would have to rely on the returned fence pointer being NULL to detect errors. However, the function vmw_execbuf_copy_fence_user() would expect a non-zero error code in that case and would BUG otherwise. So make sure we return a proper non-zero error code if the fence pointer returned is NULL. Fixes: ae2a104058e2: ("vmwgfx: Implement fence objects") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* s390/qeth: conclude all event processing before offlining a cardJulian Wiedmann2019-05-024-7/+17
| | | | | | | | | | | | | | | | | | | | commit c0a2e4d10d9366ada133a8ae4ff2f32397f8b15b upstream. Work for Bridgeport events is currently placed on a driver-wide workqueue. If the card is removed and freed while any such work is still active, this causes a use-after-free. So put the events on a per-card queue, where we can control their lifetime. As we also don't want stale events to last beyond an offline & online cycle, flush this queue when setting the card offline. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: - Add gdev parameter to qeth_alloc_card(), as done upstream by commit 121ca39aa558 "s390/qeth: uninstall IRQ handler on device removal" - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* s390/qeth: cancel close_dev work before removing a cardJulian Wiedmann2019-05-023-0/+3
| | | | | | | | | | | | | | | commit c2780c1a3fb724560b1d44f7976e0de17bf153c7 upstream. A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card. Fixes: 0f54761d167f ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* s390/qeth: fix use-after-free in error pathJulian Wiedmann2019-05-021-8/+13
| | | | | | | | | | | | | | | | | | | | commit afa0c5904ba16d59b0454f7ee4c807dae350f432 upstream. The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct. Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: - Add the qeth_free_output_queue() function, which didn't exist here - Keep using kfree() to free to free the qeth_qdio_out_q structure] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* dmaengine: dmatest: Abort test in case of mapping errorAndy Shevchenko2019-05-021-18/+14
| | | | | | | | | | | | | | | | | | | | | | commit 6454368a804c4955ccd116236037536f81e5b1f1 upstream. In case of mapping error the DMA addresses are invalid and continuing will screw system memory or potentially something else. [ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0) ... [ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000 [ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b [ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf ... Abort any test if mapping failed. Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data") Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* dmaengine: dmatest: unmap data on a single code-path when xfer doneAlexandru Ardelean2019-05-021-4/+2
| | | | | | | | | | | | | commit 0255200bd29afc320c6ea4c1adf8bdc13a9b3c15 upstream. After the DMA transfer is done, we don't need to call the un-mapping code in 3 places. One is enough. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> [bwh: Backported to 3.16 as dependency of commit 6454368a804c "dmaengine: dmatest: Abort test in case of mapping error"] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* dmaengine: bcm2835: Fix abort of transactionsLukas Wunner2019-05-021-32/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9e528c799d17a4ac37d788c81440b50377dd592d upstream. There are multiple issues with bcm2835_dma_abort() (which is called on termination of a transaction): * The algorithm to abort the transaction first pauses the channel by clearing the ACTIVE flag in the CS register, then waits for the PAUSED flag to clear. Page 49 of the spec documents the latter as follows: "Indicates if the DMA is currently paused and not transferring data. This will occur if the active bit has been cleared [...]" https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf So the function is entering an infinite loop because it is waiting for PAUSED to clear which is always set due to the function having cleared the ACTIVE flag. The only thing that's saving it from itself is the upper bound of 10000 loop iterations. The code comment says that the intention is to "wait for any current AXI transfer to complete", so the author probably wanted to check the WAITING_FOR_OUTSTANDING_WRITES flag instead. Amend the function accordingly. * The CS register is only read at the beginning of the function. It needs to be read again after pausing the channel and before checking for outstanding writes, otherwise writes which were issued between the register read at the beginning of the function and pausing the channel may not be waited for. * The function seeks to abort the transfer by writing 0 to the NEXTCONBK register and setting the ABORT and ACTIVE flags. Thereby, the 0 in NEXTCONBK is sought to be loaded into the CONBLK_AD register. However experimentation has shown this approach to not work: The CONBLK_AD register remains the same as before and the CS register contains 0x00000030 (PAUSED | DREQ_STOPS_DMA). In other words, the control block is not aborted but merely paused and it will be resumed once the next DMA transaction is started. That is absolutely not the desired behavior. A simpler approach is to set the channel's RESET flag instead. This reliably zeroes the NEXTCONBK as well as the CS register. It requires less code and only a single MMIO write. This is also what popular user space DMA drivers do, e.g.: https://github.com/metachris/RPIO/blob/master/source/c_pwm/pwm.c Note that the spec is contradictory whether the NEXTCONBK register is writeable at all. On the one hand, page 41 claims: "The value loaded into the NEXTCONBK register can be overwritten so that the linked list of Control Block data structures can be dynamically altered. However it is only safe to do this when the DMA is paused." On the other hand, page 40 specifies: "Only three registers in each channel's register set are directly writeable (CS, CONBLK_AD and DEBUG). The other registers (TI, SOURCE_AD, DEST_AD, TXFR_LEN, STRIDE & NEXTCONBK), are automatically loaded from a Control Block data structure held in external memory." Fixes: 96286b576690 ("dmaengine: Add support for BCM2835") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Florian Meier <florian.meier@koalo.de> Cc: Clive Messer <clive.m.messer@gmail.com> Cc: Matthias Reichl <hias@horus.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Florian Kauer <florian.kauer@koalo.de> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* dmaengine: bcm2835: Fix interrupt race on RTLukas Wunner2019-05-021-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f7da7782aba92593f7b82f03d2409a1c5f4db91b upstream. If IRQ handlers are threaded (either because CONFIG_PREEMPT_RT_BASE is enabled or "threadirqs" was passed on the command line) and if system load is sufficiently high that wakeup latency of IRQ threads degrades, SPI DMA transactions on the BCM2835 occasionally break like this: ks8851 spi0.0: SPI transfer timed out bcm2835-dma 3f007000.dma: DMA transfer could not be terminated ks8851 spi0.0 eth2: ks8851_rdfifo: spi_sync() failed The root cause is an assumption made by the DMA driver which is documented in a code comment in bcm2835_dma_terminate_all(): /* * Stop DMA activity: we assume the callback will not be called * after bcm_dma_abort() returns (even if it does, it will see * c->desc is NULL and exit.) */ That assumption falls apart if the IRQ handler bcm2835_dma_callback() is threaded: A client may terminate a descriptor and issue a new one before the IRQ handler had a chance to run. In fact the IRQ handler may miss an *arbitrary* number of descriptors. The result is the following race condition: 1. A descriptor finishes, its interrupt is deferred to the IRQ thread. 2. A client calls dma_terminate_async() which sets channel->desc = NULL. 3. The client issues a new descriptor. Because channel->desc is NULL, bcm2835_dma_issue_pending() immediately starts the descriptor. 4. Finally the IRQ thread runs and writes BCM2835_DMA_INT to the CS register to acknowledge the interrupt. This clears the ACTIVE flag, so the newly issued descriptor is paused in the middle of the transaction. Because channel->desc is not NULL, the IRQ thread finalizes the descriptor and tries to start the next one. I see two possible solutions: The first is to call synchronize_irq() in bcm2835_dma_issue_pending() to wait until the IRQ thread has finished before issuing a new descriptor. The downside of this approach is unnecessary latency if clients desire rapidly terminating and re-issuing descriptors and don't have any use for an IRQ callback. (The SPI TX DMA channel is a case in point.) A better alternative is to make the IRQ thread recognize that it has missed descriptors and avoid finalizing the newly issued descriptor. So first of all, set the ACTIVE flag when acknowledging the interrupt. This keeps a newly issued descriptor running. If the descriptor was finished, the channel remains idle despite the ACTIVE flag being set. However the ACTIVE flag can then no longer be used to check whether the channel is idle, so instead check whether the register containing the current control block address is zero and finalize the current descriptor only if so. That way, there is no impact on latency and throughput if the client doesn't care for the interrupt: Only minimal additional overhead is introduced for non-cyclic descriptors as one further MMIO read is necessary per interrupt to check for idleness of the channel. Cyclic descriptors are sped up slightly by removing one MMIO write per interrupt. Fixes: 96286b576690 ("dmaengine: Add support for BCM2835") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Florian Meier <florian.meier@koalo.de> Cc: Clive Messer <clive.m.messer@gmail.com> Cc: Matthias Reichl <hias@horus.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Florian Kauer <florian.kauer@koalo.de> Signed-off-by: Vinod Koul <vkoul@kernel.org> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* dmaengine: bcm2835: add additional defines for DMA-registersMartin Sperl2019-05-021-8/+49
| | | | | | | | | | | | | | | commit e42685d7a7d5afa6278561ffd85c475eae246be3 upstream. Add additional defines describing the DMA registers as well as adding some more documentation to those registers. Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Vinod Koul <vinod.koul@intel.com> [bwh: Backported to 3.16 as dependency of commit 9e528c799d17 "dmaengine: bcm2835: Fix abort of transactions"] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* dmaengine: imx-dma: fix wrong callback invokeLeonid Iziumtsev2019-05-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 341198eda723c8c1cddbb006a89ad9e362502ea2 upstream. Once the "ld_queue" list is not empty, next descriptor will migrate into "ld_active" list. The "desc" variable will be overwritten during that transition. And later the dmaengine_desc_get_callback_invoke() will use it as an argument. As result we invoke wrong callback. That behaviour was in place since: commit fcaaba6c7136 ("dmaengine: imx-dma: fix callback path in tasklet"). But after commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job") things got worse, since possible delay between tasklet_schedule() from DMA irq handler and actual tasklet function execution got bigger. And that gave more time for new DMA request to be submitted and to be put into "ld_queue" list. It has been noticed that DMA issue is causing problems for "mxc-mmc" driver. While stressing the system with heavy network traffic and writing/reading to/from sd card simultaneously the timeout may happen: 10013000.sdhci: mxcmci_watchdog: read time out (status = 0x30004900) That often lead to file system corruption. Signed-off-by: Leonid Iziumtsev <leonid.iziumtsev@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* skge: potential memory corruption in skge_get_regs()Dan Carpenter2019-05-021-2/+4
| | | | | | | | | | | | | | commit 294c149a209c6196c2de85f512b52ef50f519949 upstream. The "p" buffer is 0x4000 bytes long. B3_RI_WTO_R1 is 0x190. The value of "regs->len" is in the 1-0x4000 range. The bug here is that "regs->len - B3_RI_WTO_R1" can be a negative value which would lead to memory corruption and an abrupt crash. Fixes: c3f8be961808 ("[PATCH] skge: expand ethtool debug register dump") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* usb: gadget: musb: fix short isoc packets with inventra dmaPaul Elder2019-05-022-20/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c418fd6c01fbc5516a2cd1eaf1df1ec86869028a upstream. Handling short packets (length < max packet size) in the Inventra DMA engine in the MUSB driver causes the MUSB DMA controller to hang. An example of a problem that is caused by this problem is when streaming video out of a UVC gadget, only the first video frame is transferred. For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be set manually by the driver. This was previously done in musb_g_tx (musb_gadget.c), but incorrectly (all csr flags were cleared, and only MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY were set). Fixing that problem allows some requests to be transferred correctly, but multiple requests were often put together in one USB packet, and caused problems if the packet size was not a multiple of 4. Instead, set MUSB_TXCSR_TXPKTRDY in dma_controller_irq (musbhsdma.c), just like host mode transfers. This topic was originally tackled by Nicolas Boichat [0] [1] and is discussed further at [2] as part of his GSoC project [3]. [0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU [1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9 [2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html [3] http://elinux.org/BeagleBoard/GSoC/USBSniffer Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: - Fold in the earlier commit fb91cddc54e7 "usb: musb: Remove DMA ifdef for musb_gadget.c short_packet" - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* scsi: bnx2fc: Fix error handling in probe()Dan Carpenter2019-05-021-2/+2
| | | | | | | | | | | | | | commit b2d3492fc591b1fb46b81d79ca1fc44cac6ae0ae upstream. There are two issues here. First if cmgr->hba is not set early enough then it leads to a NULL dereference. Second if we don't completely initialize cmgr->io_bdt_pool[] then we end up dereferencing uninitialized pointers. Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [bwh: Backorted to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* s390/dasd: fix using offset into zero size array errorStefan Haberland2019-05-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4a8ef6999bce998fa5813023a9a6b56eea329dba upstream. Dan Carpenter reported the following: The patch 52898025cf7d: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning: drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]' drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake. 4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) { kzalloc() returns a ZERO_SIZE_PTR (0x16). 4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len)) That all works great. 4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1]; But now we're assuming that "->psf_data_len" was at least 2 bytes. Fix this by checking the user specified length psf_data_len. Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-10 17:25:56 +0000