summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* iio: adc: stm32-adc: fix a race when using several adcs with dma and irqFabrice Gasnier2019-11-102-3/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | commit dcb10920179ab74caf88a6f2afadecfc2743b910 upstream. End of conversion may be handled by using IRQ or DMA. There may be a race when two conversions complete at the same time on several ADCs. EOC can be read as 'set' for several ADCs, with: - an ADC configured to use IRQs. EOCIE bit is set. The handler is normally called in this case. - an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA request instead. It's then automatically cleared by DMA read. But the handler gets called due to status bit is temporarily set (IRQ triggered by the other ADC). So both EOC status bit in CSR and EOCIE control bit must be checked before invoking the interrupt handler (e.g. call ISR only for IRQ-enabled ADCs). Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iio: adc: stm32-adc: move registers definitionsFabrice Gasnier2019-11-103-134/+134
| | | | | | | | | | | | | | | | | | | commit 31922f62bb527d749b99dbc776e514bcba29b7fe upstream. Move STM32 ADC registers definitions to common header. This is precursor patch to: - iio: adc: stm32-adc: fix a race when using several adcs with dma and irq It keeps registers definitions as a whole block, to ease readability and allow simple access path to EOC bits (readl) in stm32-adc-core driver. Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* platform/x86: pmc_atom: Add Siemens SIMATIC IPC227E to critclk_systems DMI tableJan Kiszka2019-11-101-0/+7
| | | | | | | | | | | | | | commit ad0d315b4d4e7138f43acf03308192ec00e9614d upstream. The SIMATIC IPC227E uses the PMC clock for on-board components and gets stuck during boot if the clock is disabled. Therefore, add this device to the critical systems list. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dmaengine: qcom: bam_dma: Fix resource leakJeffrey Hugo2019-11-101-0/+14
| | | | | | | | | | | | | | | | | | | | | commit 7667819385457b4aeb5fac94f67f52ab52cc10d5 upstream. bam_dma_terminate_all() will leak resources if any of the transactions are committed to the hardware (present in the desc fifo), and not complete. Since bam_dma_terminate_all() does not cause the hardware to be updated, the hardware will still operate on any previously committed transactions. This can cause memory corruption if the memory for the transaction has been reassigned, and will cause a sync issue between the BAM and its client(s). Fix this by properly updating the hardware in bam_dma_terminate_all(). Fixes: e7c0fe2a5c84 ("dmaengine: add Qualcomm BAM dma driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191017152606.34120-1-jeffrey.l.hugo@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vxlan: check tun_info options_len properlyXin Long2019-11-101-1/+4
| | | | | | | | | | | | | | [ Upstream commit eadf52cf1852196a1363044dcda22fa5d7f296f7 ] This patch is to improve the tun_info options_len by dropping the skb when TUNNEL_VXLAN_OPT is set but options_len is less than vxlan_metadata. This can void a potential out-of-bounds access on ip_tun_info. Fixes: ee122c79d422 ("vxlan: Flow based tunneling") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet2019-11-101-1/+1
| | | | | | | | | | | [ Upstream commit 3ef7cf57c72f32f61e97f8fa401bc39ea1f1a5d4 ] Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: bcmgenet: reset 40nm EPHY on energy detectDoug Berger2019-11-101-2/+7
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 25382b991d252aed961cd434176240f9de6bb15f ] The EPHY integrated into the 40nm Set-Top Box devices can falsely detect energy when connected to a disabled peer interface. When the peer interface is enabled the EPHY will detect and report the link as active, but on occasion may get into a state where it is not able to exchange data with the connected GENET MAC. This issue has not been observed when the link parameters are auto-negotiated; however, it has been observed with a manually configured link. It has been empirically determined that issuing a soft reset to the EPHY when energy is detected prevents it from getting into this bad state. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* r8152: add device id for Lenovo ThinkPad USB-C Dock Gen 2Kazutoshi Noguchi2019-11-102-0/+8
| | | | | | | | | | | | | [ Upstream commit b3060531979422d5bb18d80226f978910284dc70 ] This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'. Chipset is RTL8153 and works with r8152. Without this, the generic cdc_ether grabs the device, and the device jam connected networks up when the machine suspends. Signed-off-by: Kazutoshi Noguchi <noguchi.kazutosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: usb: lan78xx: Connect PHY before registering MACAndrew Lunn2019-11-101-6/+6
| | | | | | | | | | | | | | | | | | [ Upstream commit 38b4fe320119859c11b1dc06f6b4987a16344fa1 ] As soon as the netdev is registers, the kernel can start using the interface. If the driver connects the MAC to the PHY after the netdev is registered, there is a race condition where the interface can be opened without having the PHY connected. Change the order to close this race condition. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: b53: Do not clear existing mirrored port maskFlorian Fainelli2019-11-101-1/+0
| | | | | | | | | | | | | | | [ Upstream commit c763ac436b668d7417f0979430ec0312ede4093d ] Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by: Hubert Feurstein <h.feurstein@gmail.com> Fixes: ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budgetMaxim Mikityanskiy2019-11-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 9df86bdb6746d7fcfc2fda715f7a7c3d0ddb2654 ] When CQE compression is enabled, compressed CQEs use the following structure: a title is followed by one or many blocks, each containing 8 mini CQEs (except the last, which may contain fewer mini CQEs). Due to NAPI budget restriction, a complete structure is not always parsed in one NAPI run, and some blocks with mini CQEs may be deferred to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call in the beginning of mlx5e_poll_rx_cq. However, if the budget is extremely low, some blocks may be left even after that, but the code that follows the mlx5e_decompress_cqes_cont call doesn't check it and assumes that a new CQE begins, which may not be the case. In such cases, random memory corruptions occur. An extremely low NAPI budget of 8 is used when busy_poll or busy_read is active. This commit adds a check to make sure that the previous compressed CQE has been completely parsed after mlx5e_decompress_cqes_cont, otherwise it prevents a new CQE from being fetched in the middle of a compressed CQE. This commit fixes random crashes in __build_skb, __page_pool_put_page and other not-related-directly places, that used to happen when both CQE compression and busy_poll/busy_read were enabled. Fixes: 7219ab34f184 ("net/mlx5e: CQE compression") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx4_core: Dynamically set guaranteed amount of counters per VFEran Ben Elisha2019-11-101-16/+26
| | | | | | | | | | | | | | | | | | | | [ Upstream commit e19868efea0c103f23b4b7e986fd0a703822111f ] Prior to this patch, the amount of counters guaranteed per VF in the resource tracker was MLX4_VF_COUNTERS_PER_PORT * MLX4_MAX_PORTS. It was set regardless if the VF was single or dual port. This caused several VFs to have no guaranteed counters although the system could satisfy their request. The fix is to dynamically guarantee counters, based on each VF specification. Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: hisilicon: Fix ping latency when deal with high throughputJiangfeng Xiao2019-11-101-6/+9
| | | | | | | | | | | | | | [ Upstream commit e56bd641ca61beb92b135298d5046905f920b734 ] This is due to error in over budget processing. When dealing with high throughput, the used buffers that exceeds the budget is not cleaned up. In addition, it takes a lot of cycles to clean up the used buffer, and then the buffer where the valid data is located can take effect. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksumBenjamin Herrenschmidt2019-11-101-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 88824e3bf29a2fcacfd9ebbfe03063649f0f3254 ] We are calling the checksum helper after the dma_map_single() call to map the packet. This is incorrect as the checksumming code will touch the packet from the CPU. This means the cache won't be properly flushes (or the bounce buffering will leave us with the unmodified packet to DMA). This moves the calculation of the checksum & vlan tags to before the DMA mapping. This also has the side effect of fixing another bug: If the checksum helper fails, we goto "drop" to drop the packet, which will not unmap the DMA mapping. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Fixes: 05690d633f30 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM") Reviewed-by: Vijay Khemka <vijaykhemka@fb.com> Tested-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: bcm_sf2: Fix IMP setup for port different than 8Florian Fainelli2019-11-101-15/+21
| | | | | | | | | | | | | | | [ Upstream commit 5fc0f21246e50afdf318b5a3a941f7f4f57b8947 ] Since it became possible for the DSA core to use a CPU port different than 8, our bcm_sf2_imp_setup() function was broken because it assumes that registers are applicable to port 8. In particular, the port's MAC is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS bits if we are not configured for port 8. Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cxgb4: fix panic when attaching to ULD failVishal Kulkarni2019-11-101-12/+17
| | | | | | | | | | | | | | | [ Upstream commit fc89cc358fb64e2429aeae0f37906126636507ec ] Release resources when attaching to ULD fail. Otherwise, data mismatch is seen between LLD and ULD later on, which lead to kernel panic when accessing resources that should not even exist in the first place. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nbd: handle racing with error'ed out commandsJosef Bacik2019-11-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7ce23e8e0a9cd38338fc8316ac5772666b565ca9 ] We hit the following warning in production print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700 ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 Workqueue: knbd-recv recv_work [nbd] RIP: 0010:refcount_sub_and_test_checked+0x53/0x60 Call Trace: blk_mq_free_request+0xb7/0xf0 blk_mq_complete_request+0x62/0xf0 recv_work+0x29/0xa1 [nbd] process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 ? rescuer_thread+0x340/0x340 kthread+0x111/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 ---[ end trace b079c3c67f98bb7c ]--- This was preceded by us timing out everything and shutting down the sockets for the device. The problem is we had a request in the queue at the same time, so we completed the request twice. This can actually happen in a lot of cases, we fail to get a ref on our config, we only have one connection and just error out the command, etc. Fix this by checking cmd->status in nbd_read_stat. We only change this under the cmd->lock, so we are safe to check this here and see if we've already error'ed this command out, which would indicate that we've completed it as well. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i2c: stm32f7: remove warning when compiling with W=1Alain Volmat2019-11-101-1/+1
| | | | | | | | | | | | | | | | | | | [ Upstream commit 348e46fbb4cdb2aead79aee1fd8bb25ec5fd25db ] Remove the following warning: drivers/i2c/busses/i2c-stm32f7.c:315: warning: cannot understand function prototype: 'struct stm32f7_i2c_spec i2c_specs[] = Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* of: unittest: fix memory leak in unittest_data_addNavid Emamdoost2019-11-101-0/+1
| | | | | | | | | | | | | | [ Upstream commit e13de8fe0d6a51341671bbe384826d527afe8d44 ] In unittest_data_add, a copy buffer is created via kmemdup. This buffer is leaked if of_fdt_unflatten_tree fails. The release for the unittest_data buffer is added. Fixes: b951f9dc7f25 ("Enabling OF selftest to run without machine's devicetree") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: target: core: Do not overwrite CDB byte 1Bodo Stroesser2019-11-101-21/+0
| | | | | | | | | | | | | | | | | | [ Upstream commit 27e84243cb63601a10e366afe3e2d05bb03c1cb5 ] passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN field of SCSI-2 CDBs (bits 5,6,7 of byte 1). The current code is wrong as for newer commands not having the LUN field it overwrites relevant command bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was unnecessary from the beginning or at least it is no longer useful. So we remove it entirely. Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: fix kconfig dependency warning related to 53C700_LE_ON_BEThomas Bogendoerfer2019-11-101-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit 8cbf0c173aa096dda526d1ccd66fc751c31da346 ] When building a kernel with SCSI_SNI_53C710 enabled, Kconfig warns: WARNING: unmet direct dependencies detected for 53C700_LE_ON_BE Depends on [n]: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_LASI700 [=n] Selected by [y]: - SCSI_SNI_53C710 [=y] && SCSI_LOWLEVEL [=y] && SNI_RM [=y] && SCSI [=y] Add the missing depends SCSI_SNI_53C710 to 53C700_LE_ON_BE to fix it. Link: https://lore.kernel.org/r/20191009151128.32411-1-tbogendoerfer@suse.de Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: sni_53c710: fix compilation errorThomas Bogendoerfer2019-11-101-3/+1
| | | | | | | | | | | | | [ Upstream commit 0ee6211408a8e939428f662833c7301394125b80 ] Drop out memory dev_printk() with wrong device pointer argument. [mkp: typo] Link: https://lore.kernel.org/r/20191009151118.32350-1-tbogendoerfer@suse.de Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitionsHannes Reinecke2019-11-101-5/+16
| | | | | | | | | | | | | | | | | | [ Upstream commit b6ce6fb121a655aefe41dccc077141c102145a37 ] Some arrays are not capable of returning RTPG data during state transitioning, but rather return an 'LUN not accessible, asymmetric access state transition' sense code. In these cases we can set the state to 'transitioning' directly and don't need to evaluate the RTPG data (which we won't have anyway). Link: https://lore.kernel.org/r/20191007135701.32389-1-hare@suse.de Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable()Dan Carpenter2019-11-101-2/+2
| | | | | | | | | | | | | | | | [ Upstream commit 39b65fbb813089e366b376bd8acc300b6fd646dc ] The pinctrl->functions[] array has pinctrl->num_functions elements and the pinctrl->groups[] array is the same way. These are set in ns2_pinmux_probe(). So the > comparisons should be >= so that we don't read one element beyond the end of the array. Fixes: b5aa1006e4a9 ("pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190926081426.GB2332@mwanda Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() ↵Yizhuo2019-11-101-1/+7
| | | | | | | | | | | | | | | | could be uninitialized [ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ] In function pfuze100_regulator_probe(), variable "val" could be initialized if regmap_read() fails. However, "val" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdoneAxel Lin2019-11-101-18/+8
| | | | | | | | | | | | | | | | [ Upstream commit f64db548799e0330897c3203680c2ee795ade518 ] ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns true in the latest iteration of the while loop because the timeout value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest iteration of the while loop. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: usb: sr9800: fix uninitialized local variableValentin Vidic2019-11-061-1/+1
| | | | | | | | | | | | | commit 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 upstream. Make sure res does not contain random value if the call to sr_read_cmd fails for some reason. Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bonding: fix potential NULL deref in bond_update_slave_arrEric Dumazet2019-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a7137534b597b7c303203e6bc3ed87e87a273bb8 upstream. syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL. [1] Failed to build slave-array. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039 RSP: 0018:ffff88018fe33678 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000 RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20 RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0 FS: 00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline] [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline] [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline] [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline] [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* NFC: pn533: fix use-after-free and memleaksJohan Hovold2019-11-061-1/+8
| | | | | | | | | | | | | | commit 6af3aa57a0984e061f61308fe181a9a12359fecc upstream. The driver would fail to deregister and its class device and free related resources on late probe errors. Reported-by: syzbot+cb035c75c03dbe34b796@syzkaller.appspotmail.com Fixes: 32ecc75ded72 ("NFC: pn533: change order operations in dev registation") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idleTony Lindgren2019-11-061-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | commit bacdcb6675e170bb2e8d3824da220e10274f42a7 upstream. Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi uart can fail for the first open of the uart unless connected using a hub. This is because the first dma call done by musb_ep_program() must wait if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues with other non-dma packets before the DMA transfer is started causing at least ftdi uarts to fail to receive data. Let's fix the issue by waking up cppi41 with PM runtime calls added to cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we have musb_ep_program() continue with PIO until cppi41 is awake. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v4.9+ Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: Fix potential overflow on P2P codeLaura Abbott2019-11-061-0/+6
| | | | | | | | | | | | | | | | commit 8c55dedb795be8ec0cf488f98c03a1c2176f7fb1 upstream. Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bound noa_num against P2P_MAX_NOA_NUM. Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* HID: fix error message in hid_open_report()Michał Mirosław2019-11-061-2/+5
| | | | | | | | | | | | | | | | | | | commit b3a81c777dcb093020680490ab970d85e2f6f04f upstream. On HID report descriptor parsing error the code displays bogus pointer instead of error offset (subtracts start=NULL from end). Make the message more useful by displaying correct error offset and include total buffer size for reference. This was carried over from ancient times - "Fixed" commit just promoted the message from DEBUG to ERROR. Cc: stable@vger.kernel.org Fixes: 8c3d52fc393b ("HID: make parser more verbose about parsing errors by default") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* HID: Fix assumption that devices have inputsAlan Stern2019-11-0613-34/+117
| | | | | | | | | | | | | | | | | | | | | commit d9d4b1e46d9543a82c23f6df03f4ad697dab361b upstream. The syzbot fuzzer found a slab-out-of-bounds write bug in the hid-gaff driver. The problem is caused by the driver's assumption that the device must have an input report. While this will be true for all normal HID input devices, a suitably malicious device can violate the assumption. The same assumption is present in over a dozen other HID drivers. This patch fixes them by checking that the list of hid_inputs for the hid_device is nonempty before allowing it to be used. Reported-and-tested-by: syzbot+403741a091bf41d4ae79@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* HID: i2c-hid: add Trekstor Primebook C11B to descriptor overrideHans de Goede2019-11-061-0/+19
| | | | | | | | | | | | | | commit 09f3dbe474735df13dd8a66d3d1231048d9b373f upstream. The Primebook C11B uses the SIPODEV SP1064 touchpad. There are 2 versions of this 2-in-1 and the touchpad in the older version does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: target: cxgbit: Fix cxgbit_fw4_ack()Bart Van Assche2019-11-061-1/+2
| | | | | | | | | | | | | | | | | commit fc5b220b2dcf8b512d9bd46fd17f82257e49bf89 upstream. Use the pointer 'p' after having tested that pointer instead of before. Fixes: 5cadafb236df ("target/cxgbit: Fix endianness annotations") Cc: Varun Prakash <varun@chelsio.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191023202150.22173-1-bvanassche@acm.org Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: whiteheat: fix line-speed endiannessJohan Hovold2019-11-062-4/+7
| | | | | | | | | | | | | | | | commit 84968291d7924261c6a0624b9a72f952398e258b upstream. Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines. Also use an unsigned format specifier in the corresponding debug message. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: whiteheat: fix potential slab corruptionJohan Hovold2019-11-061-0/+4
| | | | | | | | | | | | | | commit 1251dab9e0a2c4d0d2d48370ba5baa095a5e8774 upstream. Fix a user-controlled slab buffer overflow due to a missing sanity check on the bulk-out transfer buffer used for control requests. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191029102354.2733-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ldusb: fix control-message timeoutJohan Hovold2019-11-061-1/+1
| | | | | | | | | | | | | | | commit 52403cfbc635d28195167618690595013776ebde upstream. USB control-message timeouts are specified in milliseconds, not jiffies. Waiting 83 minutes for a transfer to complete is a bit excessive. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+a4fbb3bb76cda0ea4e58@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191022153127.22295-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ldusb: fix ring-buffer lockingJohan Hovold2019-11-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit d98ee2a19c3334e9343df3ce254b496f1fc428eb upstream. The custom ring-buffer implementation was merged without any locking or explicit memory barriers, but a spinlock was later added by commit 9d33efd9a791 ("USB: ldusb bugfix"). The lock did not cover the update of the tail index once the entry had been processed, something which could lead to memory corruption on weakly ordered architectures or due to compiler optimisations. Specifically, a completion handler running on another CPU might observe the incremented tail index and update the entry before ld_usb_read() is done with it. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Fixes: 9d33efd9a791 ("USB: ldusb bugfix") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191022143203.5260-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-storage: Revert commit 747668dbc061 ("usb-storage: Set ↵Alan Stern2019-11-061-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virt_boundary_mask to avoid SG overflows") commit 9a976949613132977098fc49510b46fa8678d864 upstream. Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that this interacts badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting for usb-storage. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to fix the swiotlb problem, this patch reverts commit 747668dbc061. Reported-and-tested-by: Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Seth Bollinger <Seth.Bollinger@digi.com> CC: <stable@vger.kernel.org> Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") Acked-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: gadget: Reject endpoints with 0 maxpacket valueAlan Stern2019-11-061-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 54f83b8c8ea9b22082a496deadf90447a326954e upstream. Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that a UDC will crash or hang when trying to handle a non-zero-length usb_request for such an endpoint. Indeed, dummy-hcd gets a divide error when trying to calculate the remainder of a transfer length by the maxpacket value, as discovered by the syzbot fuzzer. Currently the gadget core does not check for endpoints having a maxpacket value of 0. This patch adds a check to usb_ep_enable(), preventing such endpoints from being used. As far as I know, none of the gadget drivers in the kernel tries to create an endpoint with maxpacket = 0, but until now there has been nothing to prevent userspace programs under gadgetfs or configfs from doing it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+8ab8bf161038a8768553@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281052370.1485-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather ↵Alan Stern2019-11-061-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | segments") commit 1186f86a71130a7635a20843e355bb880c7349b2 upstream. Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42090f. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Acked-by: Christoph Hellwig <hch@lst.de> Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath6kl: fix a NULL-ptr-deref bug in ath6kl_usb_alloc_urb_from_pipe()Hui Peng2019-11-061-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 39d170b3cb62ba98567f5c4f40c27b5864b304e5 ] The `ar_usb` field of `ath6kl_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath6kl_usb` object according to endpoint descriptors read from the device side, as shown below in `ath6kl_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath6kl_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath6kl_usb_alloc_urb_from_pipe` and `ath6kl_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref (CVE-2019-15098). Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* thunderbolt: Use 32-bit writes when writing ring producer/consumerMika Westerberg2019-11-061-4/+18
| | | | | | | | | | | | | | [ Upstream commit 943795219d3cb9f8ce6ce51cad3ffe1f61e95c6b ] The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: legousbtower: fix a signedness bug in tower_probe()Dan Carpenter2019-11-061-1/+1
| | | | | | | | | | | | | | | [ Upstream commit fd47a417e75e2506eb3672ae569b1c87e3774155 ] The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false. Fixes: 1d427be4a39d ("USB: legousbtower: fix slab info leak at probe") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191011141115.GA4521@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nbd: verify socket is supported during setupMike Christie2019-11-061-2/+21
| | | | | | | | | | | | | | | | | | | [ Upstream commit cf1b2326b734896734c6e167e41766f9cee7686a ] nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nbd: fix possible sysfs duplicate warningXiubo Li2019-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 862488105b84ca744b3d8ff131e0fcfe10644be1 ] 1. nbd_put takes the mutex and drops nbd->ref to 0. It then does idr_remove and drops the mutex. 2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails to find an existing device, so it does nbd_dev_add. 3. just before the nbd_put could call nbd_dev_remove or not finished totally, but if nbd_dev_add try to add_disk, we can hit: debugfs: Directory 'nbd1' with parent 'block' already present! This patch will make sure all the disk add/remove stuff are done by holding the nbd_index_mutex lock. Reported-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
* efi/cper: Fix endianness of PCIe class codeLukas Wunner2019-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6fb9367a15d1a126d222d738b2702c7958594a5f ] The CPER parser assumes that the class code is big endian, but at least on this edk2-derived Intel Purley platform it's little endian: efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843 DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017 {1}[Hardware Error]: device_id: 0000:5d:00.0 {1}[Hardware Error]: slot: 0 {1}[Hardware Error]: secondary_bus: 0x5e {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2030 {1}[Hardware Error]: class_code: 000406 ^^^^^^ (should be 060400) Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Dave Young <dyoung@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Garrett <mjg59@google.com> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott Talbert <swt@techie.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-integrity@vger.kernel.org Link: https://lkml.kernel.org/r/20191002165904.8819-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* serial: mctrl_gpio: Check for NULL pointerAdam Ford2019-11-061-0/+3
| | | | | | | | | | | | | | | [ Upstream commit 37e3ab00e4734acc15d96b2926aab55c894f4d9c ] When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* gpio: max77620: Use correct unit for debounce timesThierry Reding2019-11-061-3/+3
| | | | | | | | | | | | | [ Upstream commit fffa6af94894126994a7600c6f6f09b892e89fa9 ] The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 21:38:39 +0000